Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 341/421 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• CFBundleDocumentTypes and iPad camera connection kit (SD reader)

  - by Kendall Helmstetter Gelner

  I am trying to register a custom document type in an iPad app, with the hopes that I can be prompted to work with files on an SD card attached to the iPad through the camera connection kit. Does anyone know if this is currently possible (or even for sure if it's not possible)? I was hoping that the Camera tab in Photos would use a document interaction controller for types it did not understand, but it seems like Photos does not check for alternate handlers at all - I tried also registering support for the jpg type but was not prompted when using photos and loading in JPG images from an SD card. There is an SD reader app called Zoomit that appears to read many different types from an SD card: http://currentphotographer.com/zoomit-application-enabled-sd-card-reader-for-the-iphone/ But it seems that involves custom hardware, that differs from the standard SD reader.

  Read the article

• VPN IP Routing - slow connections

  - by dannymcc

  UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

  Read the article

• Why I am getting "Problem loading the page" after enabling HTTPS for Apache on Windows 7?

  - by Anish

  I enabled HTTPS on the Apache server (2.2.15) Windows 7 Enterprise by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf in C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd.conf and modifying C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd-ssl.conf to include: DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" ServerName myserver.com:443 ServerAdmin [email protected] ... SSLCertificateFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem SSLCertificateKeyFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/key.pem" Then I restart apache (going to start-All Progranms-Apache Server 2.2-Control-restart) and go to localhost on port 443 in Firefox , where I get: <<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html> <head> <title>Index of /</title> </head> <body> <h1>Index of /</h1> <ul><li><a href="MyPageLinks/"> Links/</a></li> ..... .... </ul> </body></html> But on Display of WebPage I see: Unable to connect Firefox can't establish a connection to the server at localhost. *The site could be temporarily unavailable or too busy. Try again in a few moments. *If you are unable to load any pages, check your computer's network onnection. *If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. I read: Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X? and added default web server configuration block to match my DocumentRoot The error Log C:\Program Files (x86)\Apache Software Foundation\Apache2.2\logs\error.log gives following error: The Apache2.2 service is running. (OS 5)Access is denied. : Init: Can't open server certificate file C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem I checked the permissions for cert.pem and it indicates: All the permissions (Full control, Read, Read and modify, execute, Write) are marked for Admin and I am currently logged in as Admin. I tried using oldcert.pem and oldkey.pem on the same server and it works fine. Is there anything that I missed?

  Read the article

• jquery error() calls showing up in firebug profile

  - by Aros

  I am working on an ASP.NET application that make a lot of jquery and javascript calls and trying to optimize the client side code as much as possible. (This web application is only designed to run on special hardware that has very low memory and processing power.) The profiler in firebug is great for figuring out what calls are taking up the most time. I have already optimized a lot of my selectors and it is much faster. However the profile shows a lot of jquery error() calls. In the attached image of the firebug profile window you can see it was called 52 times, accounting for 15.4 of the processing time. Is that normal for jquery to call its error() like that? My code works flawlessy, and there are no error messages in the firefox error console. It seems like that is a significant performance hit. Is there anyway to get more info on what the errors are? Thanks.

  Read the article

• Is there a 2d sprite library for webgl?

  - by Devon

  I am looking to build a 2d game using WebGL. I want the hardware acceleration that WebGL provides and I cannot get this from the 2D canvas context in the canvas tag. With that said, is there a tutorial on creating 2D sprites using webGL? Or, better yet, is there a 2D sprite library for WebGL? Ideally, I'm looking for something like cocos2d ported to WebGL. Not surprisingly, all of the demos, tutorials and libraries I have found for WebGL focus on 3D manipulation. Are there any WebGL libraries that support 2D sprites?

  Read the article

• DSL Modem with Wireless Router

  - by David

  I have a D-Link WBR-1310 wireless router and a TP-Link TD-8616 DSL modem. My old DSL modem died recently and I got the TP-Link as a replacement. With my old DSL modem, I plugged it into the WAN port on my D-Link and I could reach the internet through wireless and through the network. However, when I plugged the new TP-Link into the WAN port, I was not able to get any internet connectivity (either on the network ports or through wireless). So I plugged my labtop directly into the TP-Link DSL modem and I was able to get internet connectivity. I'm trying to figure out why my labtop can see the internet connection, but not the D-Link router. I think that the problem is due to the IP networking. My D-Link was originally set to have IP address 192.168.1.1. According to the documentation for the TP-Link DSL modem, it uses 192.168.1.1 as its IP address. I do not believe that my old DSL modem had an IP address. I logged into my D-Link router and changed its IP address to 192.168.1.2 and restarted it. Unfortunately, I still could not see the internet from my wireless devices. I've read a few forum postings which implied that I needed to setup a "bridge" between the two networks. Does that sound correct? Why didn't my old DSL modem require a bridge? I read pg. 12-13 of my D-Link's manual and they suggest that I need to disable UPnP, DHCP, and then plug the DSL modem into one of the LAN ports on my router. I'm concerned about doing this since I don't think that the firewall will work if I plug my DSL modem into one of the LAN ports. I also have a home NAS on my network and I wouldn't want that to be available over the internet. Does anyone have any advice about how I can get my TPLink DSL modem to work with my D-Link router? Thanks!

  Read the article

• Searching a large list of words in another large list

  - by Christian

  I have a list of 1,000,000 strings with a maximum length of 256 with protein names. Every string has an associated ID. I have another list of 4,000,000,000 strings with a maximum length of 256 with words out of articles and every word has an ID. I want to find all matches between the list of protein names and the list of words of the articles. Which algorithm should I use? Should I use some prebuild API? It would be good if the algorithm runs on a normal PC without special hardware.

  Read the article

• Why does Xcode launch the iPhone simulator when the iPad simulator is selected?

  - by Dr Dork

  When I open an existing iPad project in Xcode and "Build and Run" it, it launches the iPhone simulator when I have the iPad Simulator set as the active executable? Inside the iPhone simulator is a shrunken version of the iPad. What is going on? How do I get it to run the iPad simulator? Note: When the iPhone Simulator is running, I double checked the Hardware-Device setting and it's set to iPad. This is what I want, of course, but I don't want it to run the iPhone simulator. I seem to recall it used to run an iPad simulator. Is there such a thing or am I tripping and there is only an iPhone simulator that can run iPad apps? Thanks in advance for your help!

  Read the article

• How do I guarantee cleanup code runs in Windows C++ (SIGINT, bad alloc, and closed window)

  - by Meekohi

  I have a Windows C++ console program, and if I don't call ReleaseDriver() at the end of my program, some pieces of hardware enter a bad state and can't be used again without rebooting. I'd like to make sure ReleaseDriver() gets runs even if the program exits abnormally, for example if I hit Ctrl+C or close the console window. I can use signal() to create a signal handler for SIGINT. This works fine, although as the program ends it pops up an annoying error "An unhandled Win32 exception occurred...". I don't know how to handle the case of the console window being closed, and (more importantly) I don't know how to handle exceptions caused by bad memory accesses etc. Thanks for any help!

  Read the article

• how to find if the machine is 32bit or 64bit

  - by prabodh

  Is there anyway from a C prog to find whether the OS is currently running in 32bit or 64bit mode. I am using a simple program as below int main(void){ switch(sizeof(void*)){ case 4: printf("32\n"); break; case 8: printf("64\n"); break; } } Is this a correct approach ? Would this code work in all the scenarios like, If the hardware is 64bit and the OS is 32bit what would it return ? I don't have machine to test this in diff configurations. Thanks for the advice.

  Read the article

• IOKit header assert.h gone? [answered]

  - by Julian Kessel

  I want to get the hardware address of my mac's ethernet card. In all samples I saw in include on IOKit/assert.h . Which doesn't seem to exist on my system. GCC throws an error saying he doesn't know the type IOEthernetAddress. Is assert.h necessary for my task? It would be great if someone coud give me a working sample. [edit] here's my code, think this will help understanding the problem: #include <IOKit/assert.h> #include <IOKit/network/IOEthernetController.h> #include <IOKit/network/IOEthernetInterface.h> int main(){ IOEthernetAddress addr; getHardwareAddress(&addr); printf("%x", addr); return 0; }

  Read the article

• Pair programming tools that are not remote

  - by JonathanTech

  I am currently in a job where we practice serious pair programming on windows machines. We both have a set of keyboards, mice, and we have two monitors, which works well for switching who's the driver really easy, but there are some points in the session that I would like to start writing tests at the same time that my pair is writing implementation. I am wondering if there is any program that would allow me to have effectively two cursors and keyboard focuses on the same computer. If they don't exist then I am willing to experiment with my own solution, but I would like input as to how to best accomplish this. I am most familiar with .Net 3.5 technologies, but I also know Java and am willing to learn C++ to solve this problem. If I was creating the solution myself I would go down the road of being able to grab the input of one hardware device (i.e. a specific mouse that's installed) and prevent Windows from moving the pointer, and instead move my own programs pointer independently.

  Read the article

• iPhone Bluetooth application to connect to a Bluetooth printer

  - by Vijayanand

  Hi, Has anybody succeeded in developing a bluetooth application on the iPhone that prints to a Bluetooth printer? I have been investigating the feasibility of developing an iPhone application that could print to a Bluetooth-enabled printer. I've gone through the most of the postings in this thread and was confused by the mail exchanges. As per my analysis: Gamekit - can be used for bluetooth connectivity between iPhones and IPods ONLY Bonjour - can be used for wi-fi connectivity between iPhones/IPods and bonjour-enabled printer We can use an external accessory to connect to a third party Bluetooth-enabled printer provided the 3rd-party printer complies with the necessary regulations from Apple (registering for either “Made for iPod”/ “Works with iPhone”, and also customizing their printer with specific hardware/software, etc.) Could someone please share their experiences?

  Read the article

• Passive FTP on Windows Server 2008 R2 using the IIS7 FTP-Server

  - by ntor

  Hello serverFault-community! During the last few days I have been setting up a Windows Server 2008 R2 in a VMware. I installed the standard FTP-Server on it by using the Webserver (IIS)-role. Everything works fine with accessing my FTP-Site with ftp://localhost in Firefox. I can also get access to it via the local IP of my Server. Actually everything works fine in my LAN. But here's my problem: I want to get access "from outside", using the external IP or a dyndns-URL. I have a LinkSys-Router in front of my Server, therefore I'm forwarding all the important ports. If you may now think "this idiot has probably forgotten some ports", I must dissappoint you. It even works getting access to my Server-Website and messing around in some WebInterfaces. The problem is my passive FTP (active works for me). I always get a timeout, when e.g. FileZilla waits for a response to the LIST-command. The one big thing I don't get, is, why my Server sends a response to the PASV-command, naming a port like 40918, even if I have restricted the data port range for my passive FTP ( in the IIS-Manager) to e.g. [5000-5009]. I simply don't want to open and forward all possible data ports! And another thing is, I can't specify a static external IP-adress for my server, since I don't own any. I hope I have explained my problem in a comprehensible way. If not, simply ask by posting a comment! LG ntor PS: I have already mainly tried following articles: Out Of Band FTP 7 shows "Operation timed out" How to Configure Windows Firewall for a Passive Mode FTP Server ServerFault --- Passive ftp on Server 2008 --- EDIT: --- There is one idea rising up in my mind: When I use FileZilla to connect by passive mode I always get something like this: 227 Entering Passive Mode (192,168,1,102,160,86) According to a Rhinosof-article FZ tries to connect on port "160*256+86 = 41046", although I have restricted the data ports (as mentioned above). Could this be caused by the router, that doesn't forward out-ports directly, but uses different ones? (-- The IP-Adress given is the local one, since I'm not able to define a static external in the IIS-Mgr)

  Read the article

• long access times and errors in iis application

  - by user55862

  I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

  Read the article

• How can I listen to multiple Serial Ports asynchronously in C#

  - by Kamiel Wanrooij

  I have an application that listens to a piece of hardware on a USB to Serial converter. My application should monitor more than one serial port at the same time. I loop the serial ports I need to listen to, and create a thread for each port. In the thread I have my data handing routine. When I assign one port, it runs flawlessly. When I listen to the other one, it also works. When I open both ports however, the second port always throws an UnauthorizedAccessException when calling serialPort.Open(). It does not matter in what order I open the ports, the second one always fails. I listen to the ports using serialPort.ReadLine() in a while loop. Can .NET open more than one port at the same time? Can I listen to both? Or should I use another (thread safe?) way to access my serial port events?

  Read the article

• tcp checksum and tcp offloading

  - by scatman

  i am using raw sockets to create my own socket. i need to set the tcp_checksum. i have tried a lot of references but all are not working (i am using wireshark for testing). could you help me please. by the way, i read somewhere that if you set tcp_checksum=0. then the hardware will calculate the checksum automatically for you. is this true? i tried it, but in wireshark the tcp_checksum gives a value of 0X000 and says tcp offload. i also read about tcp offloading, and didn't understand, is it only that wireshark is cannot check an offloaded tcp checksum, but there is a correct one??

  Read the article

• Client A can ping server S, but client B cannot

  - by Soundar Rajan

  I moved the question to here from stackoverflow.com http://stackoverflow.com/questions/2917569/unable-to-ping-server-from-client-b-but-able-to-ping-from-client-a-please-help I am trying to configure a IIS 6.0/Windows Server 2003 web server with a ASP.net application. When I try to ping the server from client computer A I get the following: PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping succeeds! From client computer B, BOTH the pings fail. PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping fails with a message "Ping request could not find host 74.208.192.xxx:80" Both clients A and B are on the same subnet. The server is outside (a virtual server hosted by an ISP) I have an ASP.NET application in a virtual directory on the server. In IE or firefox, if I enter http://74.208.192.xxx/subdir/subdir/../Default.aspx, it works from both the clients! The server has default firewall settings but web server enabled (Port 80 is open). From client A (note the different 'reply to' address when the ping succeeds. C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx Pinging 74.208.192.xx with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.xx: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx:80 Pinging 74.208.192.xx:80 [208.67.216.xxx] with 32 bytes of data: Reply from 208.67.216.xxx: bytes=32 time=35ms TTL=54 ... Reply from 208.67.216.xxx: bytes=32 time=33ms TTL=54 Ping statistics for 208.67.216.xxx: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 54ms, Average = 38ms From client B C:\Documents and Settings\user>ping 74.208.192.81 Pinging 74.208.192.81 with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.81: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Documents and Settings\user>ping 74.208.192.81:80 Ping request could not find host 74.208.192.81:80. Please check the name and try again. My main problem is I have a web service (asmx) file and the web service client program is not able to access it from client B, but able to access it from client A. I am trying to find out why and thought this ping issue may shed some light. I can ping yahoo.com both the computers.

  Read the article

• custom route not working on windows

  - by Michael Closson

  My windows laptop is directly connected to 192.168.1.0/24 (wireless lan). I access 10.21.0.0/16 though a router that is connected to both networks. The routing works fine with this configuration. I have a VPN, that connects to 10.0.0.0/8. The VPN network doesn't actually use any IPs in the 10.21.0.0/16 range. So I should be able to configure my routing table to route all the 10.21.0.0/16 IPs through the wireless lan, and all other 10.0.0.0/8 through the VPN. My understanding is that I can do this if the metric for the 10.21.0.0 is lower than that of the 10.0.0.0. The VPN (10.0.0.0) is automatically assigned metric 20. I have manually assigned the WLAN a metric of 1. I manually add an entry to the routing table with this command: route add 10.21.0.0 mask 255.255.0.0 192.168.1.201 metric 1 The route is then assigned a metric of 2 (which is expected). The problem is that it doesn't work. I can't ping any machine on the 10.21.0.0 network. But I can access other stuff on the 10.0.0.0. I can also access stuff on the 192.168.1.0. To debug this i've done the following. Run tcpdump on the router (192.168.1.201). I can verify that no packets for 10.21.0.0 arrive on that interface. Disable iptables on the router. Disable the windows firewall. Run wireshark on my laptop, to try and see which interface the ping requests go to. But I can't see them go anywhere!! The ping command doesn't receive any 'destination unreachable' messages. Here is the relevant section of the routing table. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.18 2 10.0.0.0 255.0.0.0 On-link 10.55.44.203 20 10.21.0.0 255.255.0.0 192.168.1.201 192.168.1.18 2

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Android installation in a mobile

  - by Sundar

  Is it possible to install Android in a normal mobile phone? I have Sony Ericsson Naite which has only key pad interface (No touch). I would like to install Android in my phone for experimenting with it. It will be great if its possible to dual boot Android with Symbian :-). Do we need any other special hardware to install operating system in a mobile phone? Will Android work on a key-pad mobile? Any pointer/suggestion is appreciated. Thank you in advance.

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• linear interpolation on 8bit microcontroller

  - by JB

  I need to do a linear interpolation over time between two values on an 8 bit PIC microcontroller (Specifically 16F627A but that shouldn't matter) using PIC assembly language. Although I'm looking for an algorithm here as much as actual code. I need to take an 8 bit starting value, an 8 bit ending value and a position between the two (Currently represented as an 8 bit number 0-255 where 0 means the output should be the starting value and 255 means it should be the final value but that can change if there is a better way to represent this) and calculate the interpolated value. Now PIC doesn't have a divide instruction so I could code up a general purpose divide routine and effectivly calculate (B-A)/(x/255)+A at each step but I feel there is probably a much better way to do this on a microcontroller than the way I'd do it on a PC in c++ Has anyone got any suggestions for implementing this efficiently on this hardware?

  Read the article

• Directory listing through FTPS (TLS) is not working

  - by Aron Rotteveel

  We recently switched our server to require TLS for every connection. This is working flawlessly so far, but one of our clients is having problems. Some facts: Server uses Pure-FTPD Server has a passive port range configured Server has no firewall limitations regarding the FTP Client uses WS FTP Client is behind a router Client connects to the same IP as every other, using PASSIVE mode All other clients have no trouble connecting Because of the TLS requirement, connecting using ACTIVE mode is almost not possible, but PASSIVE is working fine for everyone except this specific client. It seems that he is able to connect, but once a LIST command is performed, things go wrong. Log: Finding Host <clienthost> ... Connecting to <serverip:21> Connected to <serverip:21> in 0.020000 seconds, Waiting for Server Response Initializing SSL Session ... 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 5 of 50 allowed. 220-Local time is now 22:14. Server port: 21. 220-This is a private system - No anonymous login 220-IPv6 connections are also welcome on this server. 220 You will be disconnected after 15 minutes of inactivity. AUTH TLS 234 AUTH TLS OK. SSL session NOT set for reuse SSL Session Started. Host type (1): Automatic Detect USER <user> 331 User <user> OK. Password required PASS (hidden) 230-User <user> has group access to: <user> 230 OK. Current restricted directory is / SYST 215 UNIX Type: L8 Host type (2): Unix (Standard) PBSZ 0 200 PBSZ=0 PROT P 200 Data protection level set to "private" PWD 257 "/" is your current location CWD /public_html 250 OK. Current directory is /public_html PWD257 "/public_html" is your current location TYPE A 200 TYPE is now ASCII PASV 227 Entering Passive Mode (<serverip>,132,100) connecting data channel to <serverip>:132,100(33892) Substituting connection address <serverip> for private address <serverip> from PASV Using external address <customer ext. ip> instead of local address <customer int. ip> for PORT command PORT 82,161,56,225,195,181 200 PORT command successful LIST Error reading response from server. It appears that the connection is dead. Attempting reconnect... Any help is appreciated.

  Read the article

• Keyboard Simulation not working with Keyboard hook for modifier keys

  - by Eduardo Wada

  I have a piece of software that is being used to simulate a certain device on a touchscreen, this device already runs an application that receives keyboard input from the device. My software (reffered to as simulator) displays a virtual keyboard and runs the application. Thus, the simulator sends keys with input simulator: http://inputsimulator.codeplex.com/ And the applciation listens to keys with the following keyboard hook: https://svn.cyberduck.io/tags/release-4-1/source/ch/cyberduck/core/GlobalKeyboardHook.cs My problem is, what some keys from the device's hardware actually do is to sent a key combination (ex: left-alt + 1) to the application and a weird scenario is occurring: The application listens to normal keyboard inputs The simulator sends keys to other applications (ie: visual studio responds to the keys sent when debugging) The simulator can send single keys to the application (I can type) The simulator CANNOT send key combinations to the application (alt+1 is received as just 1 in the application) This started happenning when we imported the application's dll into the same process from the simulator. Could there be any reason why I can't simulate key combinations for a hook in the same process? Is there any easy fix for this?

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >