Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 343/421 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• WinXP - Having trouble sharing internet with 3G USB modem via ICS

  - by Carlos Nunez

  all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

  Read the article

• SSH: Connection Reset by Peer

  - by hopeless

  I have a Solaris 10 server on another network. I can ping it and telnet to it, but ssh doesn't connect. PuTTY log contains nothing of interest (they both negotiate to ssh v2) and then I get "Event Log: Network error: Software caused connection abort". ssh is defintely running: svcs -a | grep ssh online 12:12:04 svc:/network/ssh:default Here's an extract from the server's /var/adm/messages (anonymised) Jun 8 19:51:05 ******* sshd[26391]: [ID 800047 auth.crit] fatal: Read from socket failed: Connection reset by peer However, if I telnet to the box, I can login to ssh locally. I can also ssh to other (non-Solaris) machines on that network fine so I don't believe that it's a network issue (though, since I'm a few hundred miles away, I can't be sure). The server's firewall is disabled, so that shouldn't be a problem root@******** # svcs -a | grep -i ipf disabled Apr_27 svc:/network/ipfilter:default Any ideas what I should start checking? Update: Based on the feedback below, I've run sshd in debug mode. Here's the client output: $ ssh -vvv root@machine -p 32222 OpenSSH_5.0p1, OpenSSL 0.9.8h 28 May 2008 debug2: ssh_connect: needpriv 0 debug1: Connecting to machine [X.X.X.X] port 32222. debug1: Connection established. debug1: identity file /home/lawrencj/.ssh/identity type -1 debug1: identity file /home/lawrencj/.ssh/id_rsa type -1 debug1: identity file /home/lawrencj/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version Sun_SSH_1.1 debug1: no match: Sun_SSH_1.1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.0 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer And here's the server output: root@machine # /usr/lib/ssh/sshd -d -p 32222 debug1: sshd version Sun_SSH_1.1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: Bind to port 32222 on ::. Server listening on :: port 32222. debug1: Bind to port 32222 on 0.0.0.0. Server listening on 0.0.0.0 port 32222. debug1: Server will not fork when running in debugging mode. Connection from 1.2.3.4 port 2652 debug1: Client protocol version 2.0; client software version OpenSSH_5.0 debug1: match: OpenSSH_5.0 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-Sun_SSH_1.1 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible Unknown code 0 ) debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer debug1: Calling cleanup 0x4584c(0x0) This line seems a likely candidate: debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible

  Read the article

• Header file-name as argument

  - by Alphaneo

  Objective: I have a list of header files (about 50 of them), And each header-file has few arrays with constant elements. I need to write a program to count the elements of the array. And create some other form of output (which will be used by the hardware group). My solution: I included all the 50 odd files and wrote an application. And then I dumped all the elements of the array into the specified format. My environment: Visual Studio V6, Windows XP My problem: Each time there is a new set of Header files, I am now changing the VC++ project settings to point to the new set of header files, and then rebuild. My question: A bit in-sane though, Is there any way to mention the header from some command line arguments or something? I just want to avoid re-compiling the source every time...

  Read the article

• Doing 64 bit manipulation using 32 bit data in Fixed point arithmetic using C.

  - by Viks

  Hi, I am stuck with a problem. I am working on a hardware which only does support 32 bit operations. sizeof(int64_t) is 4. Sizeof(int) is 4. and I am porting an application which assumes size of int64_t to be 8 bytes. The problem is it has this macro BIG_MULL(a,b) ( (int64_t)(a) * (int64_t)(b) 23) The result is always a 32 bit integer but since my system doesn't support 64 bit operation, it always return me the LSB of the operation, rounding of all the results making my system crash. Can someone help me out? Regards, Vikas Gupta

  Read the article

• SSD Fresh Does Not Start

  - by Jim Fell

  I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

  Read the article

• Mapping of memory addresses to physical modules in Windows XP

  - by Josef Grahn

  I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

  Read the article

• OpenLayers, Layers: Tiled vs. single tile

  - by Chau

  Each time we add a new layer to our OpenLayers based website (data provided primarily by a GeoServer server), we discuss whether to use a single-tile or a tiled approach. Some of the parameters we evaluate are the following: Using the tiled approach we get: Slow but continuous buildup of the viewport Lots of small images Client side caching possibilities Blocking of the loading pipeline (6 requests at a time) Jerky feeling when navigating during load Using the single-tile approach we get: Smoother feeling when navigating during load Time delay before layer is loaded One large image for each layer No caching of the single tile We have a lot of data editing in the layers, thus a tile-cache might not be that efficient. Are there any best-practices when it comes to tiling? Progressing towards infinitely fast hardware and unlimited data connections, the discussion becomes irrelevant, but what configuration do you percieve as the most user-pleasing?

  Read the article

• Server Development Tool?

  - by aloneguid

  Hi, For my programming tasks I use about 2-3 remote servers to deploy and run my code against different conditions. This cannot be emulated locally as the server configuration requires powerful hardware. Most of time I need to stop service, update binareis, start service, view logs in realtime, download logs. Currently I'm doing this manually and over time this becomes a real pain in the ass, especially because the environment is not ideal in terms of network badwidth, reliability etc. I just wonder if someone from server programmers have the similar problems and how do you bear with them. Any special tools/hints/secrets?

  Read the article

• Using SQLLite transactions I/O Error

  - by james.ingham

  I currently have a client / server setup where the client sends data to the server and then the server saves the data to a SQLite database file. To do this I am using transactions which works fine in windows 7 when I run around 30 clients (each client sending data back between 5 - 30 seconds). When using the same software in Windows XP, I can get/set data multiple times with no problems until I run around 20 clients I start to get Windows Delayed wrote failed errors: This fires an exception on the server: I'm assuming this is either something to do with XP or a hardware issue on the machine i'm running XP. Does anyone have any advice to avoid this? Or if I should just catch the exception and retry saving the data? Thanks

  Read the article

• How to profile the execution of an OSGi deployment?

  - by Jaime Soriano

  I'm starting the development of an OSGi bundle for an application that will be deployed in a device with some hardware limitations. I'd like to know how could I profile the execution of that bundle to be always sure that it's going to fit with its dependencies in the final device. It would be nice to have a profiler to know how much memory is each bundle using, to localize bottle necks and to compare different implementations of the same service. Is there any profiler for OSGi deployments or should I use a general Java profiler? For developing I'm using Pax runner with Apache felix to run the bundle and maven to manage project dependencies and building.

  Read the article

• How to write a linter?

  - by jbdavid

  In my day job I, and others on my team write a lot of hardware models in Verilog-AMS, a language supported primarily by commercial vendors and a few opensource simulator projects. One thing that would make supporting each others code more helpful would be a LINTER that would check our code for common problems and assist with enforcing a shared code formatting style. I of course want to be able to add my own rules and, after I prove their utility to myself, promote them to the rest of the team.. I don't mind doing the work that has to be done, but of course also want to leverage the work of other existing projects. Does having the allowed language syntax in a yacc or bison format give me a leg up? or should I just suck each language statement into a perl string, and use pattern matching to find the things I don't like? (most syntax and compilation errors are easily caught by the commercial tools.. but we have some of our own extentions.)

  Read the article

• How to utilize my computation resources.

  - by carter-boater

  Hi all, I wrote a program to solve a complicated problem. This program is just a c# console application and doesn't do console.write until the computation part is finished, so output won't affect the performance. The program is like this: static void Main(string[] args) { Thread WorkerThread = new Thread(new ThreadStart(Run), StackSize); WorkerThread.Priority = ThreadPriority.Highest; WorkerThread.Start(); Console.WriteLine("Worker thread is runing..."); WorkerThread.Join(); } Now it takes 3 minute to run, when I open my task manager, I see it only take 12% of the cpu time. I actually have a i7 intel cpu with 6G three channel DDR3 memory. I am wondering how I can improve the utilization of my hardware. Thanks a lot

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Automatically find compiler options for fastest exe on given machine?

  - by dehmann

  Is there a method to automatically find the best compiler options (on a given machine), which result in the fastest possible executable? Naturally, I use g++ -O3, but there are additional flags that may make the code run faster, e.g. -ffast-math and others, some of which are hardware-dependent. Does anyone know some code I can put in my configure.ac file (GNU autotools), so that the flags will be added to the Makefile automatically by the ./configure command? In addition to automatically determining the best flags, I would be interested in some useful compiler flags that are good to use as a default for most optimized executables.

  Read the article

• fast algorithm implementation to sort very small set

  - by aaa

  hello. This is the problem I ran into long time ago. I thought I may ask your for your ideas. assume I have very small set of numbers (integers), 4 or 8 elements, that need to be sorted, fast. what would be the best approach/algorithm? my approach was to use the max/min functions. I guess my question pertains more to implementation, rather than type of algorithm. At this point it becomes somewhat hardware dependent , so let us assume Intel 64-bit processor with SSE3 . Thanks

  Read the article

• What one-time-password devices are compatible with mod_authn_otp?

  - by netvope

  mod_authn_otp is an Apache web server module for two-factor authentication using one-time passwords (OTP) generated via the HOTP/OATH algorithm defined in RFC 4226. The developer's has listed only one compatible device (the Authenex's A-Key 3600) on their website. If a device is fully compliant with the standard, and it allows you to recover the token ID, it should work. However, without testing, it's hard to tell whether a device is fully compliant. Have you ever tried other devices (software or hardware) with mod_authn_otp (or other open source server-side OTP program)? If yes, please share your experience :)

  Read the article

• a hidden program (virus) send hundred e-mail - Can you have any experience on something similar ?

  - by Aristos

  In one tablet computer yesterday I make the usually automatic updates from ms. This tablet have comodo firewall, and and old nod32. After that I notice very soon, that something start sending hundred smtp e-mail the moment the tablet computer is connected to the internet. Also the previous t time I have make updates, some 'virus' gets on the computer but I find very easy and stop it from run. I find using the autostart from sysinternals, and the process explorer. This virus has also break the automatic update from ms, and lost a lot of time to fix it. This is my usually practice when some call me to delete a virus from xp, I use the process explorer and autostart to locate the program, and delete it from everywhere. How ever the last one is so hard to locate. 0.I delete everything from temp directorys and search for suspicious files everywhere, run the nod32, 1.I use the TCPView to see witch program sending the smpt (I see hundred open smpt connections sending emails) but the SMTP was opened by the main service program. 2. I use the process monitor to locate whats happens but find again the main service that do the job. 3.I start delete many thinks on process explorer, but did not found the one that send the emails 4.I open many times the autorun but did not find there also something suspicion, I stop some thinks, but nothing happends. 5.From the last time that I suspect that this virus come to my computer and I partial remove it, he has broke my windows update, to fix it I lost a lot of time, searching on Internet for the error - it was just a register to a dll. 6.From what I suspect something is trigger after the ms update. 7.For the moment I block the email ports, and try to find a way to locate it. I like to notice here that everything is genius - and I mean everything. I believe that this virus pass from a page, or from an e-mail that this computer receive it in the past. Any help or information are appreciate. If you know anything similar, if you know how this virus send emails and how can I locate it, if you know any anti-virus anti-spyware program that maybe can find it. If you know how a virus gets after the ms updates. Million thanks.

  Read the article

• How to simulate different CPU frequency and limit RAM

  - by user351103

  Hi I have to build a simulator with C#. This simulator should be able to run a second thread with configureable CPU speed and limited RAM size, e.g. 144MHz and 50 MB. Of course I know that a simulator can never be as accurate as the real hardware. But I try to get almost similar performance. At the moment I'm thinking about creating a thread which I will stop/sleep from time to time. Depending on the desired CPU speed the simulator should adjust the sleep time of this thread and therefore simulate different cpu frequency. To measure the achieved speed I though about using PerformanceCounters. But with this approach I have the problem that I don't know how to limit the RAM size the thread could use. Do you have any ideas how to realize such a simulator? Thanks in advance!!

  Read the article

• Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

  - by valter

  Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• Is there a Novatel Wireless Modem Emulator or something similar?

  - by David Brown

  Novatel Wireless provides their NovaCore SDK for developers wishing to interface with their line of modems. I'm currently developing an open source managed wrapper for it, but I'm having difficulties with testing. I own a Novatel MiFi and have mobile broadband service through Sprint, but that can only get me so far. The device is already activated, thus I can't test the network activation features of the NovaCore SDK. There are also certain features only available for HSPA modems, which I am not able to get in my area. Is there an emulator capable of emulating a Novatel Wireless modem so that I can test my library without physical hardware and an actual data connection? If not, do you have any other suggestions that might help in this situation? I've contacted Novatel Wireless via email and their developer forum, but have not received a response. Thanks!

  Read the article

• Weird DNS bug - external server resolves to internal IP

  - by emilecantin

  I have a server that is hosted by my university. I have root access, but no control over network setup, firewall, etc. This server's DNS resolves to an internal IP here on campus (10.x.x.x), and an external IP outside campus. I also have a few servers hosted at Amazon, and they mostly work well. However, one of them started to resolve the university server by its internal IP address. This causes problems, as 10.x.x.x on Amazon EC2 is someone else. I have connected to the Amazon server with SSH agent forwarding a few times in the past, to access a Git repository on the university server. Any idea what could cause this? EDIT: Here's my /etc/resolv.conf # Generated by dhcpcd for interface eth0 search ec2.internal nameserver 172.16.0.23 Here's the output of dig myserver.myuniversity.ca.: ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34470 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 537586 IN A 10.43.x.x ;; Query time: 2 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:07:21 2012 ;; MSG SIZE rcvd: 60 Here's the expected output (on another Amazon server): ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 8045 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 601733 IN A x.x.239.1 ;; Query time: 1 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:09:36 2012 ;; MSG SIZE rcvd: 60

  Read the article

• Exceptions & Interrupts

  - by Betamoo

  When I was searching for a distinction between Exceptions and Interrupts, I found this question Interrupts and exceptions on SO... Some answers there were not suitable (at least for assembly level): "Exception are software-version of an interrupt" But there exist software interrupts!! "Interrupts are asynchronous but exceptions are synchronous" Is that right? "Interrupts occur regularly" "Interrupts are hardware implemented trap, exceptions are software implemented" Same as above! I need to find if some of these answers were right , also I would be grateful if anyone could provide a better answer... Thanks!

  Read the article

• PPP connection with RAS dialer in C++

  - by user312054

  I have a windows mobile application that is using Windows CE 5.0. I have been informed by the people supplying the hardware for the unit that I need to create a socket, which I have done successfully, and then dial out to the internet with a PPP connection with a RAS dialer connection. Our old code uses an APN to dial out so I need to create the above connection with an APN. I am having trouble finding examples of this. Can someone point me to some examples of this situation?

  Read the article

• Understanding packet flows over RVI

  - by choco-loo

  I'm trying to get a full grasp of firewall filters and how to apply them on a Juniper EX4200 switch - to be able to block ports, police traffic and shape traffic. The network architecture is as follows internet >-< vlan4000 >-< vlan43 vlan4000 is a public "routed" block (where all the IPs are routed to and the internet gw is) vlan43 is a vlan with public IPs with devices (servers) attached There are static routes and RVI's on the EX4200 to send all traffic via vlan4000's gateway to reach the internet. I've set up filters on both input and output of the respective RVI's and VLAN's - with simple counters, to measure traffic flow from a server inside of vlan43 and a server on the internet. Using a combination of iperf for UDP and TCP tests and fping for ICMP tests - I observed the following, icmp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 100 100 unit43-counter-out 0 0 vlan4000-counter-in 6 4 vlan4000-counter-out 107 104 vlan43-counter-in 101 100 vlan43-counter-out 100 100 tcp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 73535 38480 unit43-counter-out 0 0 vlan4000-counter-in 7 8 vlan4000-counter-out 73543 38489 vlan43-counter-in 73535 38481 vlan43-counter-out 38938 75880 udp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 81410 1 unit43-counter-out 0 0 vlan4000-counter-in 18 7 vlan4000-counter-out 81429 8 vlan43-counter-in 81411 1 vlan43-counter-out 1 85472 My key goals are to set up a few filters and policers, as there will be many more VLANs - that all need protecting from each other and the internet. Then globally limit/police all outbound traffic to the internet Block inbound ports to vlan43 (eg. 22) Limit outbound traffic from vlan43 (to the internet) Limit outbound traffic from vlan43 (to other vlans) Limit outbound traffic from vlan4000 (to the internet from all vlans) Route traffic from vlans via specific routing instances (FBF) The question What I want to understand is why there isn't ever any activity on unit4000 or vlan4000 inbound or outbound counter - is this because there isn't a device on this VLAN - and that the traffic is only traversing it? And with regards to the TCP test - why is there twice as many packets on unit43-counter-in, vlan4000-counter-out and vlan43-counter-in - is this counting both the inbound and outbound traffic?

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >