Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 342/1418 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

    - by Phuong Nguyen
    Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

    Read the article

  • Motorola India meets Mayan calender dead line – earlier than predicted

    - by Boonei
    My favorite cell phone maker Moto is closing it doors in India. Plan is to  have their service shops open. If you still want to grab the last living decendent of the phone in India there is good news “would continue to sell its phones till stocks are exhausted while service centers would continue to function”. Ya !  lock up in your safe, wait 20 years, then sell this antique for a fortune. There is will be staff cut and Moto promised to help employees at these difficult times. India is one of the most sort out market for mobile makers, what is running in Googles mind ? May be world is falling apart like Mayans predicted ?    

    Read the article

  • Limited connection whenever I connect to a Wi-Fi network outside the company

    - by anderZubi
    Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

    Read the article

  • Using Active Directory Security Groups as Hierarchical Tags

    - by Nathan Hartley
    Because active directory security groups can... hold objects regardless of OU. be used for reporting, documentation, inventory, etc. be referenced by automated processes (Get-QADGroupMember). be used to apply policy be used by WSUS I would like to use security groups as hierarchical tags, representing various attributes of a computer or user. I am thinking of (computer centric) tags something like these: /tag/vendor/vendorName /tag/system/overallSystemName /tag/application/vendorsApplicationName /tag/dependantOn/computerName /tag/department/departmentName /tag/updates/Group1 Before fumbling through implementing this, I thought I would seek comments from the community. Specifically in the areas: Does this make sense? Would it work? Has anyone else attempted this? Is there a good reference on the matter I should read? How best to implement the hierarchy? Tag_OU\Type_OU\GroupName (limits quantity in OU, uniqueness not guaranteed) Tag_OU\Type_OU\Tag-Type-GroupName (limits quantity in OU, uniqueness guaranteed, verbose) etc ... Thanks in advance!

    Read the article

  • RGB to DVI adapter not working for Projector-to-PC

    - by user897052
    We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

    Read the article

  • Looking for suggestions: becoming a hireable, young programmer [closed]

    - by Dan
    I am a 17 year old Java programmer that has filled the last year with learning all of the ins and outs of Java - Using Eclipse, and the help of a friend of the family (a Java programming architect for some company), I have learned everything from serializing objects, basic networking, generics, reflection, multi-threading, code optimization and efficiency & some concurrency safety - built my own proxy class, and nowadays, I answer questions on Project Euler. I am seeking some suggestions though on where I go next, or where I go from here to get a job in programming. I dedicate at least an hour every day to coding, sometimes literally, the entire day, and I really have come to love the process. I just started reading Effective Java (v2), and learning Scala (as I see often, possibly the Java replacement) I will be going to college for Computer Science next year - and taking AP computer science this year (however, I took a practice exam and got an 87, only need a 60to70 to pass, so no need to study for it too much) -- I was wondering if getting the SE 7 OCA and OCP would help me in trying to get a programming job. I looked around and most people have said online that an OCA/OCP are practically useless, but, at my age do they make me any more credible? More or less, what would you recommend to get a job in programming these days - or distinguish yourself from the crowd? I have enough time and dedication to learn another language, or anything really. Thank you very much.

    Read the article

  • Bridging a Windows 7 and Ubuntu dual boot inside an OS

    - by matsko
    I have Windows 7 and Ubuntu installed on my local PC. They're both installed on separate partitions on the same machine, and when the computer boots up the user is given the option to choose which one they want to boot use as the OS. This all works fine, but I want to use Windows 7 instead of Ubuntu, I am required to restart the computer and boot up the other OS. Is is possible to use an "inline" tool that will allow to change between both OSs as if they were windows in Windows 7? Which tool would that be? Does anyone know of anything else than Parallels? Also are there any free tools that would do this?. Many Thanks.

    Read the article

  • We've Been Busy: World Tour 2010

    - by [email protected]
    By Brian Dayton on March 11, 2010 11:17 PM Right after Oracle OpenWorld 2009 we went right into planning for our 2010 World Tour. An ambitious 90+ city tour visiting cities on every continent. The Oracle Applications Strategy Update Tour started January 19th and is in full swing right now. We've put some heavy hitters on the road. If you didn't get a chance to see Steve Miranda, Senior Vice President of Oracle Application Development in Tokyo, Anthony Lye, Senior Vice President of Oracle CRM Development in New Delhi or Sonny Singh, Senior Vice President of Oracle Industries Business Unit in Stockholm don't worry...we're not done yet. The theme, Smart Strategies: Your Roadmap to the Future is a nod to the fact that everyone needs to be smart about what's going on in their business and industry right now. But just as important---how to make sure that you're on the course to where you need to be down the road. Get the big picture and key trends in "The New Normal" of today's business climate and drill down and find out about the latest and greatest innovations in Oracle Applications. Check out http://www.oracle.com/events/applicationstour/index.html for an upcoming tour date near you. Pictures, feedback, summaries and learnings from the tour to come soon.

    Read the article

  • Why do computers get slower over time? [closed]

    - by Paperflyer
    Possible Duplicate: Why does hardware get slower with time? You probably know this: A newly bought computer is snappy and responsive and just really fast. Then you use it for a couple of months and slowly but steadily the computer gets slower. Opening programs now takes a long time, accessing files takes longer, everything just takes longer than it used to. If you wipe your hard drive and reinstall, everything is back to its original snappyness, but will deteriorate again. This always happend with any operating system I used. Worst of all Windows XP, but also with Ubuntu Linux, Fedora Linux, OSX 10.5/10.6, Windows Vista... (haven't used Win 7 long enough to confirm this) Do you know the reason for this? Or even, a cure?

    Read the article

  • Windows 7 Administrator HomeUsers Account

    - by Charles Carrington
    I'm trying to login to my Windows 7 PC from another PC so that I can transfer files to the Windows 7 PC. I've just installed Visual Studio 2008 on my new PC, and I wan't to transfer all of my work from my old machine to my new one. When I first set up a user on the Windows 7 PC after a reformat, the account created had a Group field that read "HomeUsers; Administrators" when viewing it from the User Accounts screen. You get to this screen by typing "netplwiz" in the search field of the Start Menu. I changed the Group of this account to Administrators before I realized that it was assigned to two Groups -- "HomeUsers; Administrators" as I mentioned above. I was trying to make sure that it was an Administrator account so I didn't have to type in a password everytime I wanted to install software. I can use this computer normally without being asked for an administrator password all the time when I want to install new software, but I can't log in to this PC from another PC because I don't have an account that has a Group of "HomeUsers". I should have left the account alone; everything would've been fine. But there doesn't seem to be a way to assign it to two groups after the initial assignment that take place automatically when you are setting up your computer for the first time. If you assign "HomeUsers" to the account, the Group field on the User Accounts screen will just read "HomeUsers". If you assign "Administrators" to the account, the Group field on the User Accounts screen will just read "Administrators". There's no way to make it read "HomeUsers; Administrators" again. If you don't have at least one account that is a "HomeUsers" account, you cannot log in to the PC from another PC on the network. If you don't have an account that is an "Administrators" account, you cannot install software on your machine without being asked for an Administrator password all the time, which is very annoying. I want an account on my Windows 7 PC that I can use to install software without being asked for a password AND that I can log into from another PC on the network to transfer files. If I could make the Group field read "HomeUsers; Administrators" of my primary account on the Windows 7 PC when I go to the User Accounts screen by typing "netplwiz" in the search field of the Start Menu, my primary account would do what I want it to do. Does anybody know how to make an account in Windows 7 a "HomeUsers" account AND an "Administrators" account? As I said before, Windows 7 does this for you automatically when you first set up your computer. But if you change it inadvertently, there is no way to change it back. At least I don't know how to do it. If anybody has any ideas on how to fix this, I would greatly appreciate it. Thanks, Charles Carrington

    Read the article

  • Grub loading. The symbol ' ' not found. Aborted. Press any key...

    - by John
    Hi there, I have a dual boot system on dell xps 9000 with windows 7 and ubuntu. But after I performed system backup on it as requested by windows 7 I am no longer able to boot into the computer, instead at the beginning after bios I get the following message: Grub loading. The symbol ' ' not found. Aborted. Press any key... I tried to change bios booting config to starting with harddrive and it still returned the same message. Using windows boot disk only asks me to do another system backup or threatens to delete my harddrive completely. The only solution I have so far is to reinstall ubuntu, but that leaves 2 additional copies of ubuntu on my computer. Is there a simpler way to fix the situation so I can actually boot into windows? Thanks so much.

    Read the article

  • Ubuntu 12.04 LTS won't install - never finishes please help

    - by Richard Higgins
    Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

    Read the article

  • Alt-Escape has different effect on different Win-XP machines

    - by Ram Rachum
    This is really weird. On my desktop computer, I often use Alt-Escape to send the active window to the background. This is really useful for window management. However, when I try pressing Alt-Escape on my new laptop, it does something similar but not identical: It sends the active window back, but not all the way to the background. i.e., instead of giving it the lowest index number, it just decrements its index number, probably by 1. Both computers have the same Windows XP Professional. Why is this? And how can I make my laptop computer send the active window to the background instead?

    Read the article

  • Trying to use OpenGL in Java on Netbeans but getting an error. Please help [migrated]

    - by Steven Rogers
    I am on a Mac running Netbeans 6.9. I downloaded and installed LWJGL using this tutorial down to the letter: http://lwjgl.org/wiki/index.php?title=Setting_Up_LWJGL_with_NetBeans I finished the installation and copied sample code to see if my system is working. I got a bug, and was not sure if it was because of faulty code or i was doing something wrong. So i shortened down the code to this little simple bit: package javaopengl; import org.lwjgl.Sys; import org.lwjgl.opengl.Display; //Testing public class Main { public static void main(String[] args) { boolean fullscreen = (args.length == 1 && args[0].equals("-fullscreen")); try { Display.create(); Display.destroy(); } catch (Exception e) { e.printStackTrace(System.err); } System.exit(0); } } But i still get the same error, this is the error that i get: run: Exception in thread "main" java.lang.NoClassDefFoundError: = Caused by: java.lang.ClassNotFoundException: = at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Java Result: 1 BUILD SUCCESSFUL (total time: 0 seconds) I am not sure what exactly is going on, Would you please tell me what is going on and how to fix it? It would be greatly appreciated, and thank you. Note: When i am looking at the text in the development environment, it does not show those red lines indicating there are any errors.

    Read the article

  • Macvim lags while Vim on terminal is buttery smooth

    - by SaamJB
    I am running OS X Lion 10.7.3 and Macvim runs significantly slower than vim on the terminal for me. All movement commands in Macvim are much slower. Moving up and down in visual mode is equally as laggy. I see none of this lag when using vim from the terminal. Does anyone know what the reasons may be? I am running NERDtree on every open tab, and I know this contributes some memory overhead and potentially some slow down; but even when I don't run NERDtree Macvim runs much slower than vim from the terminal. Any help in solving this would be greatly appreciated.

    Read the article

  • HTG Projects: How to Create Your Own Custom Papercraft Toy

    - by Eric Z Goodnight
    Graphics programs aren’t simply for just editing your photos—they can have whatever fun application you can think of. For a fun, geeky project, here’s a simple papercraft toy you can make with a printer and simple household tools Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video] Convert or View Documents Online Easily with Zoho, No Account Required Build a Floor Scrubbing Robot out of Computer Fans and a Frisbee Serene Blue Windows Wallpaper for Your Desktop 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video]

    Read the article

  • Using PC or Mac keyboard as Bluetooth keyboard for iPad?

    - by Kevin Hakanson
    I would like to use my computer keyboard (USB) as a Bluetooth keyboard for my iPad, while I am using it with my computer. I was hoping their was an "app for that" that I could run on either Mac or Windows. I imagine how it would work: It would have to emulate a Bluetooth keyboard, and be able to pair with the iPad. Then, when you give focus to this app, it transmits keystrokes from your built-in keyboard out over the Bluetooth connection. Seems simple, but I can't seem to find anything definitive on Google. Has anybody done this? I figure this is cheaper that buying a Apple iPad Keyboard Dock or a Apple Wireless Keyboard from the Apple Store. Also, it's one less item on my desk, which gets cluttered enough with one keyboard.

    Read the article

  • How do you explain to an "agile" team that they still need to plan the software they write?

    - by user23157
    This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

    Read the article

  • Best Performing Remote Desktop Software for WAN

    - by Dave
    I've been tasked with connecting a computer in one of our branches in the midlands to one in south wales. We have been using windows remote desktop but find it too slow. The ADSL on the computer were connecting to is about 6Mb Download and 470Kb Upload so not majorly fast. That connection is also shared with about 10 other internet users. I'm trying to find out if the is any remote desktopn connecting software that performs better than the microsoft remote desktop software. Or, would i be better using a KVM over IP? I've looked into connecting the offices through BT's fiber optic but at £21k a year rental were trying to find a cheaper solution! Any help would be great. Thanks, Dave,

    Read the article

  • Can't Create New folder in my video folder

    - by tiki
    My OS is windows 7 Ultimate 32bit. My video folder location is C:\Users\User\Documents\Downloads\Video. I Can't create folder in the Video folder or see the files i saved. But I can see the files in the root location of the folder i.e by going to the folder from My Computer. I can create and find files when I go to the folder My Computer>C>Users>User>Documents>Downloads>Video. This is an unusual problem I have never seen. Even being a system Administrator I can't able to fix the problem. Please help me out. Thanks in advance

    Read the article

  • Plugged in Not Charging.

    - by Eric Johnson
    Suggested steps to fix the nasty Windows power management issue of plugged in not charging. Option 1: Disconnect AC Shutdown Remove battery Connect AC Startup Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1). Shutdown Disconnect AC Insert battery Connect AC Startup Option 2: Turn off laptop. Unplug AC power. Remove battery. Replace AC power. Turn on laptop, allow OS to boot. Once logged in to the machine, perform a normal shut down. Unplug AC power. Replace battery. Replace AC power. Turn on laptop, allow OS to boot. The battery should once again be charging as normal Additional troubleshooting techniques: Check battery charging status in the BIOS Update BIOS Replace Battery (I did this and the new battery is not charging) See if the battery charging light works when the laptop is powered down. Supporting Links: http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/ http://social.technet.microsoft.com/Forums/en/itprovistahardware/thread/741398c6-a733-482c-a33c-2b61d9bc2984 http://www.youtube.com/watch?v=6Xf-ipP0wSY&feature=fvw

    Read the article

  • Problem with Ogre::Camera lookAt function when target is directly below.

    - by PigBen
    I am trying to make a class which controls a camera. It's pretty basic right now, it looks like this: class HoveringCameraController { public: void init(Ogre::Camera & camera, AnimatedBody & target, Ogre::Real height); void update(Ogre::Real time_delta); private: Ogre::Camera * camera_; AnimatedBody * target_; Ogre::Real height_; }; HoveringCameraController.cpp void HoveringCameraController::init(Ogre::Camera & camera, AnimatedBody & target, Ogre::Real height) { camera_ = &camera; target_ = &target; height_ = height; update(0.0); } void HoveringCameraController::update(Ogre::Real time_delta) { auto position = target_->getPosition(); position.y += height_; camera_->setPosition(position); camera_->lookAt(target_->getPosition()); } AnimatedBody is just a class that encapsulates an entity, it's animations and a scene node. The getPosition function is simply forwarded to it's scene node. What I want(for now) is for the camera to simply follow the AnimatedBody overhead at the distance given(the height parameter), and look down at it. It follows the object around, but it doesn't look straight down, it's tilted quite a bit in the positive Z direction. Does anybody have any idea why it would do that? If I change this line: position.y += height_; to this: position.x += height_; or this: position.z += height_; it does exactly what I would expect. It follows the object from the side or front, and looks directly at it.

    Read the article

  • Proper way to re-image Windows 7?

    - by Alec
    I had a driver completely fail on me so I have to restore my computer from a system image backup. I used an installation DVD to run the Re-Image utility on there, but after 8 hours of "preparing the image" to be restored, it began restoring to my hard drive. After 12 hours there, it was 5-8% complete. I figured I must have done something wrong or it started doing something wrong. So I installed a fresh copy of Win-7 and ran the utility from there. It's going at the same snail's pace. I still think I must be doing something incorrectly - I don't see how it could possibly take so long, I could probably manually flip the on my hard drive and be done before that utility. Am I doing this correctly or is there something else I should be doing? Edit: In case my hardware is relevant: Win 7 64 bit Core i7 8 GB Ram 640GB Internal 1TB External connected via eSATA I had approximately 400GB of data on my computer before it crashed.

    Read the article

  • Ubuntu 12.10 "Turn screen off when inactive for: Never" still turns off

    - by Will
    After a fresh install of Ubuntu 12.10, my screen still goes off after about ten minutes. I've been to the Brightness and Lock control panel. The Turn screen off when inactive for: setting is set for Never. I've been through the dconf Editor searching for power, screen, and idle changing parameters. This doesn't seem to have any effect on the display timeout. Here's one more interesting thing, the screen doesn't go off, per se. It just goes black. Meaning, the back lighting is still on, and all the pixels are black. When it goes black, it does a very pleasant quick dim to black. Similarly, it quickly un-dim's after a key press, mouse movement, or mouse click. So, I'm feeling this is more of a software setting the timeout, not a power saving function.

    Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >