Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 343/594 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• CentOS running inside VMware as WebServer times out on outside connection

  - by Tom Hart

  I have a CentOS machine running inside VMware, and I have got PHP and Apache set up on it, so if I open a browser (on the VM) and go to either localhost, or 192.168.0.3, I get a phpinfo page I made in /var/www/html/index.php, but, if on the host (Windows 7), in my browser I go to 192.168.0.3, it times out. I can ping the IP address from Windows and get a response, I just can't through the browser. Does anyone have any ideas what I need to do to get this working? This is my first time using a VM and I'm getting lost in the network settings.

  Read the article

• hMailServer Email + MX Records Configuration

  - by asn187

  Trying to make DNS changes to enable email to be sent using hMailServer. My mail server is on a separate machine with a separate IP Address. I have already added MyDomain.com and an email account I have create a MX Record with the mail server being mail.domain.com an a priority on 20. 1) But the question is how do I now link this MX record for the domain to my mail server/ mail server IP Address? 2) What changes are needed in hMailServer to complete the process and be able to send emails for the domain? 3) In Settings SMTP Delivery of email: What should my configuration here look like?

  Read the article

• How do you recommend installing Linux on a computer that has no external drive or ability to boot fr

  - by 7777

  I have an old Toshiba Portege 3505 "ultralight" laptop, meaning it doesn't have any kind of disk drive on it at all, that I'd like to completely reformat and install Linux on. However, it won't boot from any drive (and I don't have any on hand), so I'll have to install it from a USB drive (which I doubt it boots from either). (I'm not sure how to change the settings in my BIOS to get my computer to boot from a USB stick. Any ideas for this?) How do you recommend I do this? I want to note that I don't want to run Linux off a LiveUSB, I want to actually install it on the machine. I was thinking about Damn Small Linux, it's tiny and all I need. Any advice or suggestions for something else though? Finally, I'm a total newbie to this, I've never installed Linux on anything before so I might be a little slow on some stuff! Thanks!

  Read the article

• Free MP3 merge for Mac OS X

  - by Lilly

  Hi, I need to merge several MP3 tracks into one, I use Mac OS X 10.5. I want to convert all my Harry Potter CDs to my iPod, but not every minute a new track (as it is on the CDs) but chapterwise. Where can I get a free software? Help, please! (I've already tried: Jfuse, but after I had merged a few chapters it said I had to buy it; emicsoft VOB Converter for Mac; File Stitcher; but since they all were shareware, for free they would only let me merge 2 files at once (that would take me days) or half of each file which is useless of course; iTunes advanced settings ("join CD tracks") when importing the CDs, but it would let me only join the complete CD, not chapters...) (Sorry for my English, hope you could understand what I wanted to say)

  Read the article

• IIS6 - Change the language to English

  - by user93353

  I have a Windows 2003 VM Image which was created by a Swedish Windows Install. Afterwards the language settings of the machine was changed to English. However, I just added IIS6 Windows component to the machine (from Add/Remove Programs) - IIS6 is not in English. It's in Swedish. IIS Manager's Menu options are in English, but the Title Bar uses hanteraren(Swedish for Manager). The IIS Error pages come in Swedish. How do I get IIS's default language back in English.

  Read the article

• Cannot boot into Lucid Lynx

  - by xenon

  I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

  Read the article

• CentOS - PHP - Yum Install with Custom ./configure params

  - by Mike Purcell

  I have successfully configured and compiled php on my dev server, and works great, but after talking to a sysadmin buddy, he informed that custom compiles of the latest builds are not recommended for production (or even development) systems. He noted a situation where they custom configured and compiled PHP 5.3.6, only to find that there was some issue with a low-level Postgres driver, so they had to revert back to 5.3.3. So I am considering going back to yum to install PHP, however I have several custom configuration settings and was wondering if it's possible to pass or configure how PHP will be compiled through YUM? My current configure line: Configure Command => './configure' '--with-libdir=lib64' '--prefix=/usr/local/_custom/app/php' '--with-config-file-path=/usr/local/_custom/app/php/etc' '--with-config-file-scan-dir=/usr/local/_custom/app/php/etc/modules' '--disable-all' '--with-apxs2=/usr/sbin/apxs' '--with-curl=/usr/sbin/curl' '--with-gd' '--with-iconv' '--with-jpeg-dir=/usr/lib' '--with-mcrypt=/usr/bin' '--with-pcre-regex' '--with-pdo-mysql=mysqlnd' '--with-png-dir=/usr/lib' '--with-zlib' '--enable-ctype' '--enable-dom' '--enable-hash' '--enable-json' '--enable-libxml' '--enable-mbstring' '--enable-mbregex' '--enable-pdo' '--enable-session' '--enable-simplexml' '--enable-xml' '--enable-xmlreader' '--enable-xmlwriter'

  Read the article

• What's the difference between a wifi access point and station?

  - by Earlz

  I noticed that my (rooted) modem has some hidden modes for wifi. It has the default(and only setting without rooting) wireless access point, but it also has the settings repeater, ad-hoc, and station. What I'm really curious about is this station mode and how it differs from access point. I did a cursory search and didn't come up with any significant differences, other than that they are two distinct modes on many wireless chipsets. What is this station mode and how does it differ from access point?

  Read the article

• Move some iTunes library items to different drive?

  - by Sören Kuklau

  My internal hard drive is somewhat small, and I only regularly listen to a fraction of my iTunes library anyway, so I'd like to keep large portions on it on an external drive for archival purposes. Since dealing with multiple iTunes libraries is somewhat painful, the solution I'm looking for is to move individual items of the library to a different location, without compromising the "Keep organized" and "Copy files" settings. I found an AppleScript that I assume is supposed to do this, Move Files To Folder…, but it instead copies them, and doesn't update the library accordingly. I can do this manually by moving the file, then accessing it in iTunes — it'll prompt me for the new location. I just don't intend to do this one by one for thousands of files.

  Read the article

• Can't start my Windows XP Virtual Machine: Insufficient Disk Space

  - by Rob

  Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

  Read the article

• Redirect URL using Mac OS X Server Lion

  - by pheedsta

  I have just set up a Mac Mini with OS X Lion Server to host my own website. I have registered multiple domain names, but I would like the user to be automatically redirected to my main domain name if they type in one of the others (i.e. if the user types in www.myotherdomain.com the URL will be forwarded instantly to www.mymaindomain.com). In the Web settings of Server.app, you can easily add additional domains (which works) but it does not change the URL in the browser to www.mymaindomain.com. It keeps www.myotherdomain.com whilst still displaying the correct pages. Does the redirects or alias options do what I want? I can't seem to work out how to use them (there seems to be no documentation that I can find). In Redirects, you need to enter: 'Redirect Type' (Exact Match or Regular Expression) 'Redirect Path' 'Destination URL' 'Redirect Status' (Original was permanently moved, etc) In Alias, you need to enter: 'Alias Type' (Exact Match or Regular Expression) 'Alias Path' 'Destination Folder' Any help would be great.

  Read the article

• dell poweredge 860 always pxe boot

  - by Berto

  Hi, We bought a dell poweredge 860, and installed windows server 2008 std. So far so good. Now everytime the server reboots, it try's the pxe boot, and hangs on "cant find pxe bootable, press f1 to continue or f2 to setup". Now, i tried all the settings in the bios (it's the latest - A05), i have the nic active without pxe (i also tried with the nic off)... well, i tried everyting off and on the bios and it still goes to pxe booting. I have one sata drive, that is boot's after the f1. I would like to keep the system updated, but i can't because of the reboot, can someone point me to some direction? Can i give any more information of the server? If yes, what do you want? It has been a week on google trying to figure out this one. Thx

  Read the article

• Use external speakers with laptop hooked to separate monitor?

  - by lhan16

  I have a laptop with a set of external speakers hooked up to it on my computer desk. The speakers use the standard 3.5mm audio (headphones) jack. The speakers work fine, but I've recently added a separate monitor to my laptop via HDMI. With the monitor hooked up to my laptop and the speakers still hooked up to the laptop, sound will only come out of the built-in monitor speakers. When I look at my audio settings, there are three different "audio playback devices" showing up, but only the built-in monitor speakers make noise when I click "test" (and I hear nothing when I set any of the other devices as the default. Does anyone know how I can still use my external speakers when using a separate monitor with my laptop? I'm hoping there is a solution that doesn't require the laptop to be open or closed, because I use both scenarios. I came across this post, but it doesn't look like they had much luck.

  Read the article

• proxy/vpn by dns entry

  - by rcourtna

  I've been using a service by unblock-us.com, which provides a proxy to Canadians/others allowing access to services that are locked down to only US ip addresses. This is easy enough to achieve by setting up a reverse proxy (eg: squid) on a US-hosted server, and then configuring your browser or OS to use that proxy. However, there is something that unblock-us does that I'm not sure how to duplicate. Rather than configuring your OS to use them as a proxy, you can simply change the DNS Server settings on your router to point to their addresses. Any requests to services they support are automatically proxied. The advantage to this is that you don't have to set up every computer in your house, and it "just works" with clients like ps3, xbox, android, etc. Disadvantage is you really don't have control over what gets proxied, as well as there are privacy concerns I suppose. How can I achieve this same functionality on my own us-based slice?

  Read the article

• How do I disable other monitors while running games in Wine?

  - by Michael Cheng

  My current setup is: * Dual GTS 250 video cards * 3 Monitors * Used nvidia-settings to run each monitor as a separate x session * This is all running on Linux Mint Debian Edition When running games (Starcraft II) in Wine via PlayOnLinux, I've found that the mouse does not get locked. I already tried various solutions littered across the web and none work so I'd rather just disable my other two monitors while playing. Does anyone know of a method where I can turn off my other two monitors (not my primary monitor) while running Wine and then turn then back on afterwards? I don't mind having to manually run a script before and after gaming. Thanks.

  Read the article

• XenServer: Editing clone configuration before boot

  - by Jeff Ferland

  Upon cloning a base image, I need to reconfigure basic settings. Regenerating the ssh host key, changing static IP assignments, setting the host name, etc. Because of the network setup, DHCP is not an option. That more or less rules out SSHing in with a predefined key or running a startup script since I can't provide the IP externally. I'd most like to mount the filesystem of the new machine on Dom0, but the lvm volumes are exported and it appears to be Bad Form to import them so the Dom0 machine can see them. What's your best suggestion for altering files in a cloned VM before boot? Must be non-interactive, and I'm going to guess out the gate that scripting access via xe console is not going to work well.

  Read the article

• Adjusting the column height of a Word 2007 Mail Merge on every page?

  - by leeand00

  I've been doing mail merges lately and we use labels that aren't listed in the default MS Word settings: I tried measuring them out and here is what I got: Despite measuring them they don't seem to fit, and I always end up having to adjust the heights so that they print correctly. When I do this and I have 24 pages or so of labels I have to adjust each page individually and it all gets a bit annoying. So I was wondering if anyone had the proper measurements (since mine didn't work) or if maybe someone knew how to adjust the height of the columns of every page in exactly the same way to avoid using more labels.

  Read the article

• Non-printing characters in Word 2011 not showing even when enabled

  - by Henrik Söderlund

  I have a document I work on often, my resume. I have created a few different styles that I use and for some reason the non-printing characters have stopped showing properly. I have the option enabled (the reversed P) and the proper settings in the preferences checked. Here is a screenshot of the current view: basically, only the tab stops and the returns are showing. Upon doing an experiment by creating a new document, all characters (especially the spaces) show up nicely: I can copy this line and paste it into my resume document and it shows up there too. It seems my styles are doing something...

  Read the article

• How to redirect logs from Cisco firewall to a specific file ?

  - by nitins

  We need to redirect the logs from our Cisco firewall(SA520-K9) to syslogd server(it's a CentOS server). The settings are done on the firewall. But the messages from firewall are going to /var/log/messages and console instead of /var/log/firewall.log which is our requirent. *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/firewall.log This is our syslog config file. Any advices ?

  Read the article

• 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

  - by user12889

  I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• Change from IDE to AHCI after installing Windows 8

  - by Louis

  I had my drive controller configured for IDE when I installed Windows 7. This didn't change when I upgraded to Windows 8. I now need to enable AHCI, but doing so causes Windows to fail to start. It doesn't know how to automatically fix the problem. I was able to use Regedit from the recovery area, in order to try using this fix that worked for Vista. That key is missing in Windows 8, however. I read that the relevant key is now in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci. But my settings already match the changes they suggest making. How can I get Windows to boot after enabling AHCI in the BIOS?

  Read the article

• VPN Split Tunneling - Pros and Cons and how to achieve?

  - by Theveloper

  Well this is the dilemma, I want remote clients to connect to my network and only route local access through the VPN. This is split tunneling, the client uses its internet connection for all other internet requests and the VPN tunnel to my network for local requests. There's a couple of issues that arise: split tunneling in Windows is achieved by unticking an option which reads "Use default gateway on remote network" in the TCP/IP settings of the client VPN connection. At any point the user can tick it and route all his internet traffic through my network eating away at my bandwidth and being cloaked by my IP address. This is unacceptable. Issue number 2 is that if the client is split tunneling, he becomes a gateway between the internet and my network, this is also unacceptable. My questions are: how does one achieve split tunneling serverside? And is the latter issue a valid con worthy of worry? Any thoughts would be appreciated!

  Read the article

• Prevent Windows Live Mail to download all messages from IMAP

  - by m8t

  Hello, Recently I'm trying the Window Live Mail client. Simple and beautiful. I have set up an IMAP account, and I'm used that a client only downloads headers. However Windows Live Mail automatically creates a list of tasks to download all messages from all directories when you are closing the client. Is it possible to avoid this? It's a good and a bad thing. You can work offline and you have a backup, but it takes extremely long to perform, in fact I have about hundred of thousand of emails. This task can take a whole day to perform. After looking in the settings I don't see anything special, maybe you have an idea? Thank you Mike

  Read the article

• Apache httpd.conf handle multiple domains to run the same application

  - by John Stewart

  So what we are looking for is the ability to do the following: We have an application that can load certain settings based on the domain that it is being accessed from. So if you come from xyz.com we show a different logo and if you come from abc.com we show a different logo. The code is the same, running from same server just detects the domain on the run Now we want to get a dedicated server (any suggestions?) that will enable us to point all the doamins that we want to this server (we change the DNS for the domains to that of our server) and then when the user goes to a certain domain they run the same application. Now as far as I can understand we will need to create a "VirtualHost" in apache to handle this. Can we create a wildcard virtualhost that catches all the domains? I am not an expert with Apache at all. So please forgive if this comes out to be a silly question. Any detailed help would be great. Thanks

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >