Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 344/958 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

  • Booting Error while using 12.04 booting from GRUB

    - by Paul Z.
    my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

    Read the article

  • Windows7 access to Printer shared with XP ?

    - by chmike
    I have, at home, an eeebox running with XP 24/24 with an attached printer (Canon IP5300) installed as shared. We have a few other laptops and PC, all with vista, that can access and print on the shared printer without problem. We just received a new Dell computer with Windows7-64 on it, but it fails to connect the shared printer. I tried connecting the printer with its USB cord directly to the Windows7 PC and the required driver was automatically downloaded and installed. I could then access the printer specific properties, etc. But if I connect it back to the XP computer, the windows7 PC still refused to connect to the remote printer although it now have the drivers. The windows7 is a family pack. By the way, I also have an old canon scanner still perfectly working with XP, but for which I can't find compatible drivers for windows 7. Do I have to buy a new one ? Any help would be welcome.

    Read the article

  • UEFI - Linux Mint Boot from USB Doesn't work

    - by Joe Bennett
    I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

    Read the article

  • Connect to bluetooth device from command line

    - by Ilari Kajaste
    Background: I'm using my bluetooth headset as audio output. I managed to get it working by the long list of instructions on BluetoothHeadset community documentation, and I have automated the process of activating the headset as default audio output into a script, thanks to another question. However, since I use the bluetooth headset with both my phone and computer (and the headset doesn't support two input connections) in order for the phone not to "steal" the connection when handset is turned on, I force the headset into a discovery mode when connecting to the computer (phone gets to connect to it automatically). So even though the headset is paired ok and would in "normal" scenario autoconnect, I have to always use the little bluetooth icon in the notification area to actually connect to my device (see screenshot). What I want to avoid: This GUI for connecting to a known and paired bluetooth device: What I want instead: I'd want to make the bluetooth do exactly what the clicking the connect item in the GUI does, only by using command line. I want to use command line so I can make a single keypress shortcut for the action, and would't need to navigate the GUI every time I want to establish a connection to the device. The question: How can I attempt to connect to a specific, known and paired bluetooth device from command line? Further question: How do I tell if the connection was successful or not?

    Read the article

  • How to maximise performance in computers connected into LAN via Gigabit ethernet router?

    - by penyuan
    Our group is setting up a server (which might just be a NAS, but we're not sure yet), which shares files, so that it connects to all other computers in the room (about 10 of them). I am thinking just hooking all of them up via a gigabit router/switch. Is there anything I should watch out for, in terms of cables, connections, or the connection capabilities of each computer in the network? For instance, I don't want a slow computer in the LAN to slow down everyone else's connection, etc., etc. Thanks for the education.

    Read the article

  • How to monitor the network traffic on a router?

    - by Adi
    Here's my current network set-up: we have 3 users connecting to a Thomson Gateway router (TG585 v8) provided by my ISP. We are connecting over an ADSL line. The problem is that we have a limited data allowance (60GB) and we always exceed it. I would like to monitor how much traffic each computer makes. The best solution would be to install a software on the router (like OpenWRT) which would monitor how much traffic each computer makes. But I couldn't find any replacement firmware that would support my router. The other solution would be to install a software on each machine and then collect all the data at the end of the mount. But that's not a very good think to do. Plus, the users can always shut down the application. Any suggestions?

    Read the article

  • backup software that ignores user rights

    - by Chris
    Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

    Read the article

  • Ubuntu unstable, showing awkward behavior

    - by Christophe De Troyer
    Let me start off by saying that this problem can't be described in such a way that allows me to find other topics, which have some relevance to this problem. That's why I created this question. In case this question might have been asked before, I apologize. So what is the problem: My computer (Intel Core I5 2500K - with HD3000 graphics -, 6 gb DDR, 1 SSD, 3 HDD's and an Asus P8Z68 mobo) runs Windows on the SDD. But I decided to give Ubuntu a chance to be my daily OS for basic needs since it's open source and I find it a handicap of not being able to work with it. I decided to run the windows installer and install Ubuntu 12.04 to my 320 Gb hdd which was not being used in my computer. After installing it and booting it, it worked great! I spent the rest of the day/night using it, and falling for it. Great, today I booted Ubuntu (I had the choice in the bootloader as I expected). It asked me for my login and it started logging in. Now, after a few (literally) minutes of letting it "boot" I tried determining the cause of this. What I've figured out so far: When I left click on my desktop it freezes completely for a few seconds I have something like tearing in the left side menu (in games, you know) when I move my mouse around It runs well when just hovering around with my mouse, but from the point I click on something it freezes. What have I tried? I ran a HD Tune diagnostic on the HDD but the performance seems to be very close to the stock values, so I'm taking it as a good HDD. I'm trying to get to the drivers update panel for Ubuntu, but with the state it's in, it's taking a lot of time.. Could anyone point me in a direction for troubleshooting this? I'm not really a noob at all, just when using Linux.. :) Thanks in advance! Christophe,

    Read the article

  • Ubuntu 12.04 LTS won't install - never finishes please help

    - by Richard Higgins
    Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

    Read the article

  • Inspiring the method of teaching. Example- C++ :)

    - by Ashwin
    A year ago I graduated with a degree in Computer Science and Engineering. Considering C++ as the first choice of programming language I have been in the process of learning C++ in many ways. At first - five years back - I had many conceptions, most of which were so abstract to me. It started when I knew almost everything about Structs in C and nothing about Classes in C++. I went through a great time experimenting them all and learning a lot. I had a hard time evaluating Procedural programming vs Object-Oriented Programming. Deciding when to choose Procedural or Object-Oriented Programming took a great deal of patience for me. I knew that I cannot underestimate any of these Programming styles... Though Procedural programming is often a better choice than simple sequential unstructured programming, when solving problems with procedural programming, we usually divide one problem into several steps in order regarded as functions. Then we call these functions one by one to get the result of the problem. When solving problems with Object Oriented Priciples we divide one problem into several classes and form the interaction between them. Evaluating these two at the beginning (as a learner) required a lot of inspiration and thoughts. Instructing to think step by step. Relative concepts to understand deeply. Intensive interests to contrast both solving in both POP and OOP. If you were ever a mentor: What ideas/methods would you teach to students in which it will Inspire them to learn a programming language (in general, computer sciences)?

    Read the article

  • Scheme vs Haskell for an Introduction to Functional Programming?

    - by haziz
    I am comfortable with programming in C and C#, and will explore C++ in the future. I may be interested in exploring functional programming as a different programming paradigm. I am doing this for fun, my job does not involve computer programming, and am somewhat inspired by the use of functional programming, taught fairly early, in computer science courses in college. Lambda calculus is certainly beyond my mathematical abilities, but I think I can handle functional programming. Which of Haskell or Scheme would serve as a good intro to functional programming? I use emacs as my text editor and would like to be able to configure it more easily in the future which would entail learning Emacs Lisp. My understanding, however, is that Emacs Lisp is fairly different from Scheme and is also more procedural as opposed to functional. I would likely be using "The Little Schemer" book, which I have already bought, if I pursue Scheme (seems to me a little weird from my limited leafing through it). Or would use the "Learn You a Haskell for Great Good" if I pursue Haskell. I would also watch the Intro to Haskell videos by Dr Erik Meijer on Channel 9. Any suggestions, feedback or input appreciated. Thanks. P.S. BTW I also have access to F# since I have Visual Studio 2010 which I use for C# development, but I don't think that should be my main criteria for selecting a language.

    Read the article

  • Need to upgrade DDR2 RAM on HP Desktop

    - by jds
    I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

    Read the article

  • MacBook Refuses to Boot

    - by pas09
    I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • Isass.exe Application error

    - by shelbang
    I own a hp mini. It has come up with a blue screen and says: The Application failed to intialize properly (0xc0000005). Click on OK to terminate the application. i click on it twice but it stayed on the blank blue screen. i have tryed going on the safe mode thingy.. and pressing F9 and F10 and F8 but none of the above work. Considering its a HP mini- it doesnt have a cd rom compartment!?!? pleasee help !! i cant live without my computer! ): - ps using sisters computer atm :S shhh

    Read the article

  • Multicast hostname lookups on OSX

    - by KARASZI István
    I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

    Read the article

  • What do encrypted files' data look like?

    - by Frost Shadow
    I know there are a lot of encryption programs available, that I would guess use different methods for encryption, and thus have different types of output files (.fve .tc .cha .dmg (bitlocker, truecrypt, challenger, ect.)), but if someone didn't know what the file was and just looked at the data, what would it look like? Does it just look like random bits, or can you still pick out a pattern? If it does look random, how is it if I moved the encrypted file to another computer, the other computer can tell it's a file, and is able to decrypt it (how would it even know where to start or stop, if it all looked random)? Also, how is the structure affected by encrypting files twice, using the same method, or a different one? Thanks for any help, and if you know any books or site about encryption for complete idiots, I'd appreciate it!

    Read the article

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • Selected wrong OS from bootloader settings and now can't do anything

    - by Eric
    I'm trying to help a friend out with an urgent issue he is having. He has two Windows 7 installations when he was starting up his computer so the bootloader menu was making him select an OS every time he restarted. One installation is functional and the other is not. He wanted to make it so that he did not have to select the correct OS every time he booted up. He chose the wrong (non-functional) operating system in the windows settings and set the time to select an operating system int he bootloader menu to 0 seconds. Now, his computer attempts to boot into a non-working operating system and he has no way of selecting the correct operating system so that he can fix his mistake. What can he do to get into the functional OS so that he can fix his mistake? Thanks so much.

    Read the article

  • Shooter in iOS and a visible Aim line before shooting

    - by London2423
    I have to questions. I am trying to develop a game that is iOS but I did it first in my computer so I can tested there. I was able to must of it for PC but I am having a very hard time with iOS port The problem I do have is that I don't know how to shout in iOS. To be more specific how to line render in iOS This is the script I use in my computer using UnityEngine; using System.Collections; public class NewBehaviourScript : MonoBehaviour { LineRenderer line; void Start () { line = gameObject.GetComponent<LineRenderer>(); line.enabled = false; } void Update () { if (Input.GetButtonDown ("Fire1")) { StopCoroutine ("FireLaser"); StartCoroutine ("FireLaser"); } } IEnumerator FireLaser () { line.enabled = true; while (Input.GetButton("Fire1")) { Ray ray = new Ray(transform.position, transform.forward); RaycastHit hit; line.SetPosition (0, ray.origin); if (Physics.Raycast (ray, out hit,100)) { line.SetPosition(1,hit.point); if (hit.rigidbody) { hit.rigidbody.AddForceAtPosition(transform.forward * 5, hit.point); } } else line.SetPosition (1, ray.GetPoint (100)); yield return null; } line.enabled = false; { } } } Which part I have to change for iOS? I already did in the iOS the touch giu event so my player move around in the xcode/Iphone but I need some help with the shouting part. The second part of the question is where I do have to insert or change the script in order to first aim and I DO see the line of aim and then shout. Now the player can only shout. It can not aim at the gameobject, see the the line coming out of the gun aiming at the object and then shout? How I can do that. Everyone tell me Line render but that's what i did Thank you

    Read the article

  • RGB to DVI adapter not working for Projector-to-PC

    - by user897052
    We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

    Read the article

  • Connecting to a VirtualBox machine from the host, using an ip address

    - by Doron
    Hello, In a macbook host, I run VirtualBox having a guest ubuntu server, with a NAT network setting. In the virtual machine application "Parallels", I would get on the host an IP address of the guest, to which I could later set hostnames and access it directly. However, I couldn't find a way to accomplish this using VirtualBox. The only solution VirtualBox has for me, is to set port forwarding, and access "localhost" with these ports. How can I have the desired behavior set up, without having to change to a bridged network settings, and expose my guest computer to the network my host computer is connected to ? Thanks.

    Read the article

  • How to add a Mac to Windows Active Directory

    - by Ben Daniel
    I've gone into the Directory Utility on the mac, clicked on the services tab, entered the Active Directory Domain and Computer ID, clicked the Bind button and it showed a little status label which flickered through 5 of 5 steps and then said "An unknown error occurred". If I ignore the error and just click the OK button further down the screen and make sure the Active Directory service is ticked in the list of services, then go to the Directory Servers tab and try to add an Active Directory by entering my ad domain, computer id, admin username and password I get an error "Unable to add the domain. An unexpected error of type -14090 (eDSAuthFailed) occurred." Any ideas?

    Read the article

  • Adding MX records to DNS

    - by Teddy
    Let's say I have a computer A which is running postfix, computer B is running tinydns. On domain project.domain.com I'm running httpd server and other server with DNS (tinydns) have entries like =project.domain.com:1.2.3.4:86400 and +project.domain.com:1.2.3.4:86400 where 1.2.3.4 is correct addres for server which runs httpd server. I also have a postfix mail server on 1.2.3.5 which I'd like to work with this domain (project.domain.com). I'm afraid that if I add another alias like +project.domain.com:1.2.3.5:86400 to tinydns configuration - it could break. How that entry should look like? Thank you for any hints.

    Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >