optimized solutions - Page 346

Is it possible to shuffle a 2D matrix while preserving row AND column frequencies?

- by j_random_hacker

Suppose I have a 2D array like the following: GACTG AGATA TCCGA Each array element is taken from a small finite set (in my case, DNA nucleotides -- {A, C, G, T}). I would like to randomly shuffle this array somehow while preserving both row and column nucleotide frequencies. Is this possible? Can it be done efficiently? [EDIT]: By this I mean I want to produce a new matrix where each row has the same number of As, Cs, Gs and Ts as the corresponding row of the original matrix, and where each column has the same number of As, Cs, Gs and Ts as the corresponding column of the original matrix. Permuting the rows or columns of the original matrix will not achieve this in general. (E.g. for the example above, the top row has 2 Gs, and 1 each of A, C and T; if this row was swapped with row 2, the top row in the resulting matrix would have 3 As, 1 G and 1 T.) It's simple enough to preserve just column frequencies by shuffling a column at a time, and likewise for rows. But doing this will in general alter the frequencies of the other kind. My thoughts so far: If it's possible to pick 2 rows and 2 columns so that the 4 elements at the corners of this rectangle have the pattern XY YX for some pair of distinct elements X and Y, then replacing these 4 elements with YX XY will maintain both row and column frequencies. In the example at the top, this can be done for (at least) rows 1 and 2 and columns 2 and 5 (whose corners give the 2x2 matrix AG;GA), and for rows 1 and 3 and columns 1 and 4 (whose corners give GT;TG). Clearly this could be repeated a number of times to produce some level of randomisation. Generalising a bit, any "subrectangle" induced by a subset of rows and a subset of columns, in which the frequencies of all rows are the same and the frequencies of all columns are the same, can have both its rows and columns permuted to produce a valid complete rectangle. (Of these, only those subrectangles in which at least 1 element is changed are actually interesting.) Big questions: Are all valid complete matrices reachable by a series of such "subrectangle rearrangements"? I suspect the answer is yes. Are all valid subrectangle rearrangements decomposable into a series of 2x2 swaps? I suspect the answer is no, but I hope it's yes, since that would seem to make it easier to come up with an efficient algorithm. Can some or all of the valid rearrangements be computed efficiently? This question addresses a special case in which the set of possible elements is {0, 1}. The solutions people have come up with there are similar to what I have come up with myself, and are probably usable, but not ideal as they require an arbitrary amount of backtracking to work correctly. Also I'm concerned that only 2x2 swaps are considered. Finally, I would ideally like a solution that can be proven to select a matrix uniformly at random from the set of all matrices having identical row frequencies and column frequencies to the original. I know, I'm asking for a lot :)

Read the article

Keeping video viewing statistics breakdown by video time in a database

- by Septagram

I need to keep a number of statistics about the videos being watched, and one of them is what parts of the video are being watched most. The design I came up with is to split the video into 256 intervals and keep the floating-point number of views for each of them. I receive the data as a number of intervals the user watched continuously. The problem is how to store them. There are two solutions I see. Row per every video segment Let's have a database table like this: CREATE TABLE `video_heatmap` ( `id` int(11) NOT NULL AUTO_INCREMENT, `video_id` int(11) NOT NULL, `position` tinyint(3) unsigned NOT NULL, `views` float NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `idx_lookup` (`video_id`,`position`) ) ENGINE=MyISAM Then, whenever we have to process a number of views, make sure there are the respective database rows and add appropriate values to the views column. I found out it's a lot faster if the existence of rows is taken care of first (SELECT COUNT(*) of rows for a given video and INSERT IGNORE if they are lacking), and then a number of update queries is used like this: UPDATE video_heatmap SET views = views + ? WHERE video_id = ? AND position >= ? AND position < ? This seems, however, a little bloated. The other solution I came up with is Row per video, update in transactions A table will look (sort of) like this: CREATE TABLE video ( id INT NOT NULL AUTO_INCREMENT, heatmap BINARY (4 * 256) NOT NULL, ... ) ENGINE=InnoDB Then, upon every time a view needs to be stored, it will be done in a transaction with consistent snapshot, in a sequence like this: If the video doesn't exist in the database, it is created. A row is retrieved, heatmap, an array of floats stored in the binary form, is converted into a form more friendly for processing (in PHP). Values in the array are increased appropriately and the array is converted back. Row is changed via UPDATE query. So far the advantages can be summed up like this: First approach Stores data as floats, not as some magical binary array. Doesn't require transaction support, so doesn't require InnoDB, and we're using MyISAM for everything at the moment, so there won't be any need to mix storage engines. (only applies in my specific situation) Doesn't require a transaction WITH CONSISTENT SNAPSHOT. I don't know what are the performance penalties of those. I already implemented it and it works. (only applies in my specific situation) Second approach Is using a lot less storage space (the first approach is storing video ID 256 times and stores position for every segment of the video, not to mention primary key). Should scale better, because of InnoDB's per-row locking as opposed to MyISAM's table locking. Might generally work faster because there are a lot less requests being made. Easier to implement in code (although the other one is already implemented). So, what should I do? If it wasn't for the rest of our system using MyISAM consistently, I'd go with the second approach, but currently I'm leaning to the first one. But maybe there are some reasons to favour one approach or another?

Read the article

Calculate the number of ways to roll a certain number

- by helloworld

I'm a high school Computer Science student, and today I was given a problem to: Program Description: There is a belief among dice players that in throwing three dice a ten is easier to get than a nine. Can you write a program that proves or disproves this belief? Have the computer compute all the possible ways three dice can be thrown: 1 + 1 + 1, 1 + 1 + 2, 1 + 1 + 3, etc. Add up each of these possibilities and see how many give nine as the result and how many give ten. If more give ten, then the belief is proven. I quickly worked out a brute force solution, as such int sum,tens,nines; tens=nines=0; for(int i=1;i<=6;i++){ for(int j=1;j<=6;j++){ for(int k=1;k<=6;k++){ sum=i+j+k; //Ternary operators are fun! tens+=((sum==10)?1:0); nines+=((sum==9)?1:0); } } } System.out.println("There are "+tens+" ways to roll a 10"); System.out.println("There are "+nines+" ways to roll a 9"); Which works just fine, and a brute force solution is what the teacher wanted us to do. However, it doesn't scale, and I am trying to find a way to make an algorithm that can calculate the number of ways to roll n dice to get a specific number. Therefore, I started generating the number of ways to get each sum with n dice. With 1 die, there is obviously 1 solution for each. I then calculated, through brute force, the combinations with 2 and 3 dice. These are for two: There are 1 ways to roll a 2 There are 2 ways to roll a 3 There are 3 ways to roll a 4 There are 4 ways to roll a 5 There are 5 ways to roll a 6 There are 6 ways to roll a 7 There are 5 ways to roll a 8 There are 4 ways to roll a 9 There are 3 ways to roll a 10 There are 2 ways to roll a 11 There are 1 ways to roll a 12 Which looks straightforward enough; it can be calculated with a simple linear absolute value function. But then things start getting trickier. With 3: There are 1 ways to roll a 3 There are 3 ways to roll a 4 There are 6 ways to roll a 5 There are 10 ways to roll a 6 There are 15 ways to roll a 7 There are 21 ways to roll a 8 There are 25 ways to roll a 9 There are 27 ways to roll a 10 There are 27 ways to roll a 11 There are 25 ways to roll a 12 There are 21 ways to roll a 13 There are 15 ways to roll a 14 There are 10 ways to roll a 15 There are 6 ways to roll a 16 There are 3 ways to roll a 17 There are 1 ways to roll a 18 So I look at that, and I think: Cool, Triangular numbers! However, then I notice those pesky 25s and 27s. So it's obviously not triangular numbers, but still some polynomial expansion, since it's symmetric. So I take to Google, and I come across this page that goes into some detail about how to do this with math. It is fairly easy(albeit long) to find this using repeated derivatives or expansion, but it would be much harder to program that for me. I didn't quite understand the second and third answers, since I have never encountered that notation or those concepts in my math studies before. Could someone please explain how I could write a program to do this, or explain the solutions given on that page, for my own understanding of combinatorics? EDIT: I'm looking for a mathematical way to solve this, that gives an exact theoretical number, not by simulating dice

Read the article

Restructuring html with javascript

- by tolborg

I have a regular unordered list of links, which I would like to change using js <ul> <li><a href="#">Theme 1</a></li> <li><a href="#">Theme 2</a></li> <li><a href="#">Theme 3</a></li> <li><a href="#">Theme 4</a></li> <li><a href="#">Theme 5</a></li> <li><a href="#">Theme 6</a></li> <li><a href="#">Theme 7</a></li> <li><a href="#">Theme 8</a></li> <li><a href="#">Theme 9</a></li> <li><a href="#">Theme 10</a></li> <li><a href="#">Theme 11</a></li> <li><a href="#">Theme 12</a></li> </ul> I would like the following output: <div class="themes__row"> <div class="themes__item><a href="#">Theme 1</a></div> <div class="themes__item><a href="#">Theme 2</a></div> <div class="themes__item><a href="#">Theme 3</a></div> <div class="themes__item><a href="#">Theme 4</a></div> </div> <div class="themes__row"> <div class="themes__item><a href="#">Theme 5</a></div> <div class="themes__item><a href="#">Theme 6</a></div> <div class="themes__item><a href="#">Theme 7</a></div> <div class="themes__item><a href="#">Theme 8</a></div> </div> <div class="themes__row"> <div class="themes__item><a href="#">Theme 9</a></div> <div class="themes__item><a href="#">Theme 10</a></div> <div class="themes__item><a href="#">Theme 11</a></div> <div class="themes__item><a href="#">Theme 12</a></div> </div> I have tried a few different solutions back and forth, but it ends up being really messy, so I dont really have any code to show. How is this done in a clever way? The site is using jQuery 1.4.4 if that matters.

Read the article

C++ Simple thread with parameter (no .net)

- by Marc Vollmer

I've searched the internet for a while now and found different solutions but then all don't really work or are to complicated for my use. I used C++ until 2 years ago so it might be a bit rusty :D I'm currently writing a program that posts data to an URL. It only posts the data nothing else. For posting the data I use curl, but it blocks the main thread and while the first post is still running there will be a second post that should start. In the end there are about 5-6 post operations running at the same time. Now I want to push the posting with curl into another thread. One thread per post. The thread should get a string parameter with the content what to push. I'm currently stuck on this. Tried the WINAPI for windows but that crashes on reading the parameter. (the second thread is still running in my example while the main thread ended (waiting on system("pause")). It would be nice to have a multi plattform solution, because it will run under windows and linux! Heres my current code: #define CURL_STATICLIB #include <curl/curl.h> #include <curl/easy.h> #include <cstdlib> #include <iostream> #include <stdio.h> #include <stdlib.h> #include <string> #if defined(WIN32) #include <windows.h> #else //#include <pthread.h> #endif using namespace std; void post(string post) { // Function to post it to url CURL *curl; // curl object CURLcode res; // CURLcode object curl = curl_easy_init(); // init curl if(curl) { // is curl init curl_easy_setopt(curl, CURLOPT_URL, "http://10.8.27.101/api.aspx"); // set url string data = "api=" + post; // concat post data strings curl_easy_setopt(curl, CURLOPT_POSTFIELDS, data.c_str()); // post data res = curl_easy_perform(curl); // execute curl_easy_cleanup(curl); // cleanup } else { cerr << "Failed to create curl handle!\n"; } } #if defined(WIN32) DWORD WINAPI thread(LPVOID data) { // WINAPI Thread string pData = *((string*)data); // convert LPVOID to string [THIS FAILES] post(pData); // post it with curl } #else // Linux version #endif void startThread(string data) { // FUnction to start the thread string pData = data; // some Test #if defined(WIN32) CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)thread, &pData, 0, NULL); // Start a Windows thread with winapi #else // Linux version #endif } int main(int argc, char *argv[]) { // The post data to send string postData = "test1234567890"; startThread(postData); // Start the thread system("PAUSE"); // Dont close the console window return EXIT_SUCCESS; } Has anyone a suggestion? Thanks for the help!

Read the article

Tool or library for end-users to run queries to select (not modify) data?

- by Mark Rushakoff

For a utility I'm working on, the client would like to be able to generate graphic reports on the data that has been collected. I can already generate a couple canned graphs (using ZedGraph, which is a very nice library); however, the utility would be much more flexible if the graphs were more programmable or configurable by the end-user. TLDR version I want users to be able to use something like SQL to safely extract and select data from a List of objects that I provide and can describe. What free tools or libraries will help me accomplish this? Full version I've given thought to using IronPython, IronRuby, and LuaInterface, but frankly they're all a bit overpowered for what I want to do. My classes are fairly simple, along the lines of: class Person: string Name; int HeightInCm; DateTime BirthDate; Weight[] WeighIns; class Weight: int WeightInKg; DateTime Date; Person Owner; (exact classes have been changed to protect the innocent). To come up with the data for the graph, the user will choose whether it's a bar graph, scatter plot, etc., and then to actually obtain the data, I would like to obtain some kind of List from the user simply entering something SQL-ish along the lines of SELECT Name, AVG(WeighIns) FROM People SELECT WeightInKg, Owner.HeightInCm FROM Weights And as a bonus, it would be nice if you could actually do operations as well: SELECT WeightInKg, (Date - Owner.BirthDate) AS Age FROM Weights The DSL doesn't have to be compliant SQL in any way; it doesn't even have to resemble SQL, but I can't think of a more efficient descriptive language for the task. I'm fine filling in blanks; I don't expect a library to do everything for me. What I would expect to exist (but haven't been able to find in any way, shape, or form) is something like Fluent NHibernate (which I am already using in the project) where I can declare a mapping, something like var personRequest = Request<Person>(); personRequest.Item("Name", (p => p.Name)); personRequest.Item("HeightInCm", (p => p.HeightInCm)); personRequest.Item("HeightInInches", (p => p.HeightInCm * CM_TO_INCHES)); // ... var weightRequest = Request<Weight>(); weightRequest.Item("Owner", (w => w.Owner), personRequest); // Indicate a chain to personRequest // ... var people = Table<Person>("People", GetPeopleFromDatabase()); var weights = Table<Weight>("Weights", GetWeightsFromDatabase()); // ... TryRunQuery(userInputQuery); LINQ is so close to what I want to do, but AFAIK there's no way to sandbox it. I don't want to expose any unnecessary functionality to the end user; meaning I don't want the user to be able to send in and process: from p in people select (p => { System.IO.File.Delete("C:\\something\\important"); return p.Name }) So does anyone know of any free .NET libraries that allow something like what I've described above? Or is there some way to sandbox LINQ? cs-script is close too, but it doesn't seem to offer sandboxing yet either. I'd be hesitant to expose the NHibernate interface either, as the user should have a read-only view of the data at this point in the usage. I'm using C# 3.5, and pure .NET solutions would be preferred. The bottom line is that I'm really trying to avoid writing my own parser for a subset of SQL that would only apply to this single project.

Read the article

Split a Large File In C++

- by wdow88

Hey all, I'm trying to write a program that takes a large file (of any time) and splits it into many smaller "chunks". I think I have the basic idea down, but for some reason I cannot create a chunk size over 12,000 bites. I know there are a few solutions on google, etc. but I am more interested in learning what the origin of this limitation is then actually using the program to split files. //This file splits are larger into smaller files of a user inputted size. #include<iostream> #include<fstream> #include<string> #include<sstream> #include <direct.h> #include <stdlib.h> using namespace std; void GetCurrentPath(char* buffer) { _getcwd(buffer, _MAX_PATH); } int main() { // use the function to get the path char CurrentPath[_MAX_PATH]; GetCurrentPath(CurrentPath);//Get the current directory (used for displaying output) fstream bigFile; string filename; int partsize; cout << "Enter a file name: "; cin >> filename; //Recieve target file cout << "Enter the number of bites in each smaller file: "; cin >> partsize; //Recieve volume size bigFile.open(filename.c_str(),ios::in | ios::binary); bigFile.seekg(0, ios::end); // position get-ptr 0 bytes from end int size = bigFile.tellg(); // get-ptr position is now same as file size bigFile.seekg(0, ios::beg); // position get-ptr 0 bytes from beginning for (int i = 0; i <= (size / partsize); i++) { //Build File Name string partname = filename; //The original filename string charnum; //archive number stringstream out; //stringstream object out, used to build the archive name out << "." << i; charnum = out.str(); partname.append(charnum); //put the part name together //Write new file part fstream filePart; filePart.open(partname.c_str(),ios::out | ios::binary); //Open new file with the name built above //Check if near the end of file if (bigFile.tellg() < (size - (size%partsize))) { filePart.write(reinterpret_cast<char *>(&bigFile),partsize); //Write the selected amount to the file filePart.close(); //close file bigFile.seekg(partsize, ios::cur); //move pointer to next position to be written } //Changes the size of the last volume because it is the end of the file else { filePart.write(reinterpret_cast<char *>(&bigFile),(size%partsize)); //Write the selected amount to the file filePart.close(); //close file } cout << "File " << CurrentPath << partname << " produced" << endl; //display the progress of the split } bigFile.close(); cout << "Split Complete." << endl; return 0; } Any ideas? Thanks!

Read the article

database design help for game / user levels / progress

- by sprugman

Sorry this got long and all prose-y. I'm creating my first truly gamified web app and could use some help thinking about how to structure the data. The Set-up Users need to accomplish tasks in each of several categories before they can move up a level. I've got my Users, Tasks, and Categories tables, and a UserTasks table which joins the three. ("User 3 has added Task 42 in Category 8. Now they've completed it.") That's all fine and working wonderfully. The Challenge I'm not sure of the best way to track the progress in the individual categories toward each level. The "business" rules are: You have to achieve a certain number of points in each category to move up. If you get the number of points needed in Cat 8, but still have other work to do to complete the level, any new Cat 8 points count toward your overall score, but don't "roll over" into the next level. The number of Categories is small (five currently) and unlikely to change often, but by no means absolutely fixed. The number of points needed to level-up will vary per level, probably by a formula, or perhaps a lookup table. So the challenge is to track each user's progress toward the next level in each category. I've thought of a few potential approaches: Possible Solutions Add a column to the users table for each category and reset them all to zero each time a user levels-up. Have a separate UserProgress table with a row for each category for each user and the number of points they have. (Basically a Many-to-Many version of #1.) Add a userLevel column to the UserTasks table and use that to derive their progress with some kind of SUM statement. Their current level will be a simple int in the User table. Pros & Cons (1) seems like by far the most straightforward, but it's also the least flexible. Perhaps I could use a naming convention based on the category ids to help overcome some of that. (With code like "select cats; for each cat, get the value from Users.progress_{cat.id}.") It's also the one where I lose the most data -- I won't know which points counted toward leveling up. I don't have a need in mind for that, so maybe I don't care about that. (2) seems complicated: every time I add or subtract a user or a category, I have to maintain the other table. I foresee synchronization challenges. (3) Is somewhere in between -- cleaner than #2, but less intuitive than #1. In order to find out where a user is, I'd have mildly complex SQL like: SELECT categoryId, SUM(points) from UserTasks WHERE userId={user.id} & countsTowardLevel={user.level} groupBy categoryId Hmm... that doesn't seem so bad. I think I'm talking myself into #3 here, but would love any input, advice or other ideas.

Read the article

Incorrect data when passing pointer a list of pointers to a function. (C++)

- by Phil Elm

I'm writing code for combining data received over multiple sources. When the objects received (I'll call them MyPacket for now), they are stored in a standard list. However, whenever I reference the payload size of a partial MyPacket, the value shows up as 1 instead of the intended size. Here's the function code: MyPacket* CombinePackets(std::list<MyPacket*>* packets, uint8* current_packet){ uint32 total_payload_size = 0; if(packets->size() <= 0) return NULL; //For now. std::list<MyPacket*>::iterator it = packets->begin(); //Some minor code here, not relevant to the problem. for(uint8 index = 0; index < packets->size(); index++){ //(*it)->GetPayloadSize() returns 1 when it should show 1024. I've tried directly accessing the variable and more, but I just can't get it to work. total_payload_size += (*it)->GetPayloadSize(); cout << "Adding to total payload size value: " << (*it)->GetPayloadSize() << endl; std::advance(it,1); } MyPacket* packet = new MyPacket(); //Byte is just a typedef'd unsigned char. packet->payload = (byte) calloc(total_payload_size, sizeof(byte)); packet->payload_size = total_payload_size; it = packets->begin(); //Go back to the beginning again. uint32 big_payload_index = 0; for(uint8 index = 0; index < packets->size(); index++){ if(current_packet != NULL) *current_packet = index; for(uint32 payload_index = 0; payload_index < (*it)->GetPayloadSize(); payload_index++){ packet->payload[big_payload_index] = (*it)->payload[payload_index]; big_payload_index++; } std::advance(it,1); } return packet; } //Calling code std::list<MyPacket*> received = std::list<MyPacket*>(); //The code that fills it is here. std::list<MyPacket*>::iterator it = received.begin(); cout << (*it)->GetPayloadSize() << endl; // Outputs 1024 correctly! MyPacket* final = CombinePackets(&received,NULL); cout << final->GetPayloadSize() << endl; //Outputs 181, which happens to be the number of elements in the received list. So, as you can see above, when I reference (*it)-GetPayloadSize(), it returns 1 instead of the intended 1024. Can anyone see the problem and if so, do you have an idea on how to fix this? I've spent 4 hours searching and trying new solutions, but they all keep returning 1... EDIT:

Read the article

HTML/CSS - No 100% height on div in IE

- by Jordan Rynard

Okay, so I've got a problem - and I'd love to have it fixed. I am using my favourite way of setting up a simple header/content/footer layout. The problem is that any elements I add to the 'content' div of my layout can not be expanded to 100% in Internet Explorer (as far as I know, IE only). I understand there is no height declared to the 'content' element, but because of the style of its positioning (declaring an absolute top AND bottom), the element fills the desired area. (The content element has a background color defined so you can see that the div is in fact filling between both the header and the footer.) So my problem is, since the div is clearly expanded between the two, why can't a child be set to 100% to fill that area? If anyone has any solutions, I'd love to hear them. (I'm looking for a solution that won't involve designing by an entire different layout.. or at least perhaps an explanation of why this is happening. I'm assuming at this point it's because of the lack of a height declaration -- but the div is expanded, so I don't get it!) You can view a page of the example here: http://www.elizabethlouter.com/html/index.html And here is the code as used on the page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta name="robots" content="noindex" /> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>No 100% height on 'content' child div in IE</title> </head> <style> html, body { width:100%; height:100%; margin:0px; padding:0px; } body { position:relative; } #wrapper { position:absolute; top:0px; width:960px; height:100%; left:50%; margin-left:-480px; } #header{ position:absolute; top:0px; left:0px; width:100%; height:200px; background-color:#999; } #content{ position:absolute; top:100px; bottom:50px; left:0px; width:100%; background-color:#F7F7F7; } #content_1{ width:200px; background-color:black; height:100%; } #footer{ position:absolute; bottom:0px; left:0px; width:100%; height:50px; background-color:#999; } </style> <body> <div id="wrapper"> <div id="header"> </div> <div id="content"> <div id="content_1"> </div> </div> <div id="footer"> </div> </div> </body> </html>

Read the article

Hosting the Razor Engine for Templating in Non-Web Applications

- by Rick Strahl

Microsoft’s new Razor HTML Rendering Engine that is currently shipping with ASP.NET MVC previews can be used outside of ASP.NET. Razor is an alternative view engine that can be used instead of the ASP.NET Page engine that currently works with ASP.NET WebForms and MVC. It provides a simpler and more readable markup syntax and is much more light weight in terms of functionality than the full blown WebForms Page engine, focusing only on features that are more along the lines of a pure view engine (or classic ASP!) with focus on expression and code rendering rather than a complex control/object model. Like the Page engine though, the parser understands .NET code syntax which can be embedded into templates, and behind the scenes the engine compiles markup and script code into an executing piece of .NET code in an assembly. Although it ships as part of the ASP.NET MVC and WebMatrix the Razor Engine itself is not directly dependent on ASP.NET or IIS or HTTP in any way. And although there are some markup and rendering features that are optimized for HTML based output generation, Razor is essentially a free standing template engine. And what’s really nice is that unlike the ASP.NET Runtime, Razor is fairly easy to host inside of your own non-Web applications to provide templating functionality. Templating in non-Web Applications? Yes please! So why might you host a template engine in your non-Web application? Template rendering is useful in many places and I have a number of applications that make heavy use of it. One of my applications – West Wind Html Help Builder - exclusively uses template based rendering to merge user supplied help text content into customizable and executable HTML markup templates that provide HTML output for CHM style HTML Help. This is an older product and it’s not actually using .NET at the moment – and this is one reason I’m looking at Razor for script hosting at the moment. For a few .NET applications though I’ve actually used the ASP.NET Runtime hosting to provide templating and mail merge style functionality and while that works reasonably well it’s a very heavy handed approach. It’s very resource intensive and has potential issues with versioning in various different versions of .NET. The generic implementation I created in the article above requires a lot of fix up to mimic an HTTP request in a non-HTTP environment and there are a lot of little things that have to happen to ensure that the ASP.NET runtime works properly most of it having nothing to do with the templating aspect but just satisfying ASP.NET’s requirements. The Razor Engine on the other hand is fairly light weight and completely decoupled from the ASP.NET runtime and the HTTP processing. Rather it’s a pure template engine whose sole purpose is to render text templates. Hosting this engine in your own applications can be accomplished with a reasonable amount of code (actually just a few lines with the tools I’m about to describe) and without having to fake HTTP requests. It’s also much lighter on resource usage and you can easily attach custom properties to your base template implementation to easily pass context from the parent application into templates all of which was rather complicated with ASP.NET runtime hosting. Installing the Razor Template Engine You can get Razor as part of the MVC 3 (RC and later) or Web Matrix. Both are available as downloadable components from the Web Platform Installer Version 3.0 (!important – V2 doesn’t show these components). If you already have that version of the WPI installed just fire it up. You can get the latest version of the Web Platform Installer from here: http://www.microsoft.com/web/gallery/install.aspx Once the platform Installer 3.0 is installed install either MVC 3 or ASP.NET Web Pages. Once installed you’ll find a System.Web.Razor assembly in C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\System.Web.Razor.dll which you can add as a reference to your project. Creating a Wrapper The basic Razor Hosting API is pretty simple and you can host Razor with a (large-ish) handful of lines of code. I’ll show the basics of it later in this article. However, if you want to customize the rendering and handle assembly and namespace includes for the markup as well as deal with text and file inputs as well as forcing Razor to run in a separate AppDomain so you can unload the code-generated assemblies and deal with assembly caching for re-used templates little more work is required to create something that is more easily reusable. For this reason I created a Razor Hosting wrapper project that combines a bunch of this functionality into an easy to use hosting class, a hosting factory that can load the engine in a separate AppDomain and a couple of hosting containers that provided folder based and string based caching for templates for an easily embeddable and reusable engine with easy to use syntax. If you just want the code and play with the samples and source go grab the latest code from the Subversion Repository at: http://www.west-wind.com:8080/svn/articles/trunk/RazorHosting/ or a snapshot from: http://www.west-wind.com/files/tools/RazorHosting.zip Getting Started Before I get into how hosting with Razor works, let’s take a look at how you can get up and running quickly with the wrapper classes provided. It only takes a few lines of code. The easiest way to use these Razor Hosting Wrappers is to use one of the two HostContainers provided. One is for hosting Razor scripts in a directory and rendering them as relative paths from these script files on disk. The other HostContainer serves razor scripts from string templates… Let’s start with a very simple template that displays some simple expressions, some code blocks and demonstrates rendering some data from contextual data that you pass to the template in the form of a ‘context’. Here’s a simple Razor template: @using System.Reflection Hello @Context.FirstName! Your entry was entered on: @Context.Entered @{ // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); } AppDomain Id: @AppDomain.CurrentDomain.FriendlyName Assembly: @Assembly.GetExecutingAssembly().FullName Code based output: @{ // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } Response.Write(output); } Pretty easy to see what’s going on here. The only unusual thing in this code is the Context object which is an arbitrary object I’m passing from the host to the template by way of the template base class. I’m also displaying the current AppDomain and the executing Assembly name so you can see how compiling and running a template actually loads up new assemblies. Also note that as part of my context I’m passing a reference to the current Windows Form down to the template and changing the title from within the script. It’s a silly example, but it demonstrates two-way communication between host and template and back which can be very powerful. The easiest way to quickly render this template is to use the RazorEngine<TTemplateBase> class. The generic parameter specifies a template base class type that is used by Razor internally to generate the class it generates from a template. The default implementation provided in my RazorHosting wrapper is RazorTemplateBase. Here’s a simple one that renders from a string and outputs a string: var engine = new RazorEngine<RazorTemplateBase>(); // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; string output = engine.RenderTemplate(this.txtSource.Text new string[] { "System.Windows.Forms.dll" }, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; Simple enough. This code renders a template from a string input and returns a result back as a string. It creates a custom context and passes that to the template which can then access the Context’s properties. Note that anything passed as ‘context’ must be serializable (or MarshalByRefObject) – otherwise you get an exception when passing the reference over AppDomain boundaries (discussed later). Passing a context is optional, but is a key feature in being able to share data between the host application and the template. Note that we use the Context object to access FirstName, Entered and even the host Windows Form object which is used in the template to change the Window caption from within the script! In the code above all the work happens in the RenderTemplate method which provide a variety of overloads to read and write to and from strings, files and TextReaders/Writers. Here’s another example that renders from a file input using a TextReader: using (reader = new StreamReader("templates\\simple.csHtml", true)) { result = host.RenderTemplate(reader, new string[] { "System.Windows.Forms.dll" }, this.CustomContext); } RenderTemplate() is fairly high level and it handles loading of the runtime, compiling into an assembly and rendering of the template. If you want more control you can use the lower level methods to control each step of the way which is important for the HostContainers I’ll discuss later. Basically for those scenarios you want to separate out loading of the engine, compiling into an assembly and then rendering the template from the assembly. Why? So we can keep assemblies cached. In the code above a new assembly is created for each template rendered which is inefficient and uses up resources. Depending on the size of your templates and how often you fire them you can chew through memory very quickly. This slighter lower level approach is only a couple of extra steps: // we can pass any object as context - here create a custom context var context = new CustomContext() { WinForm = this, FirstName = "Rick", Entered = DateTime.Now.AddDays(-10) }; var engine = new RazorEngine<RazorTemplateBase>(); string assId = null; using (StringReader reader = new StringReader(this.txtSource.Text)) { assId = engine.ParseAndCompileTemplate(new string[] { "System.Windows.Forms.dll" }, reader); } string output = engine.RenderTemplateFromAssembly(assId, context); if (output == null) this.txtResult.Text = "*** ERROR:\r\n" + engine.ErrorMessage; else this.txtResult.Text = output; The difference here is that you can capture the assembly – or rather an Id to it – and potentially hold on to it to render again later assuming the template hasn’t changed. The HostContainers take advantage of this feature to cache the assemblies based on certain criteria like a filename and file time step or a string hash that if not change indicate that an assembly can be reused. Note that ParseAndCompileTemplate returns an assembly Id rather than the assembly itself. This is done so that that the assembly always stays in the host’s AppDomain and is not passed across AppDomain boundaries which would cause load failures. We’ll talk more about this in a minute but for now just realize that assemblies references are stored in a list and are accessible by this ID to allow locating and re-executing of the assembly based on that id. Reuse of the assembly avoids recompilation overhead and creation of yet another assembly that loads into the current AppDomain. You can play around with several different versions of the above code in the main sample form: Using Hosting Containers for more Control and Caching The above examples simply render templates into assemblies each and every time they are executed. While this works and is even reasonably fast, it’s not terribly efficient. If you render templates more than once it would be nice if you could cache the generated assemblies for example to avoid re-compiling and creating of a new assembly each time. Additionally it would be nice to load template assemblies into a separate AppDomain optionally to be able to be able to unload assembli es and also to protect your host application from scripting attacks with malicious template code. Hosting containers provide also provide a wrapper around the RazorEngine<T> instance, a factory (which allows creation in separate AppDomains) and an easy way to start and stop the container ‘runtime’. The Razor Hosting samples provide two hosting containers: RazorFolderHostContainer and StringHostContainer. The folder host provides a simple runtime environment for a folder structure similar in the way that the ASP.NET runtime handles a virtual directory as it’s ‘application' root. Templates are loaded from disk in relative paths and the resulting assemblies are cached unless the template on disk is changed. The string host also caches templates based on string hashes – if the same string is passed a second time a cached version of the assembly is used. Here’s how HostContainers work. I’ll use the FolderHostContainer because it’s likely the most common way you’d use templates – from disk based templates that can be easily edited and maintained on disk. The first step is to create an instance of it and keep it around somewhere (in the example it’s attached as a property to the Form): RazorFolderHostContainer Host = new RazorFolderHostContainer(); public RazorFolderHostForm() { InitializeComponent(); // The base path for templates - templates are rendered with relative paths // based on this path. Host.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Add any assemblies you want reference in your templates Host.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container Host.Start(); } Next anytime you want to render a template you can use simple code like this: private void RenderTemplate(string fileName) { // Pass the template path via the Context var relativePath = Utilities.GetRelativePath(fileName, Host.TemplatePath); if (!Host.RenderTemplate(relativePath, this.Context, Host.RenderingOutputFile)) { MessageBox.Show("Error: " + Host.ErrorMessage); return; } this.webBrowser1.Navigate("file://" + Host.RenderingOutputFile); } You can also render the output to a string instead of to a file: string result = Host.RenderTemplateToString(relativePath,context); Finally if you want to release the engine and shut down the hosting AppDomain you can simply do: Host.Stop(); Stopping the AppDomain and restarting it (ie. calling Stop(); followed by Start()) is also a nice way to release all resources in the AppDomain. The FolderBased domain also supports partial Rendering based on root path based relative paths with the same caching characteristics as the main templates. From within a template you can call out to a partial like this: @RenderPartial(@"partials\PartialRendering.cshtml", Context) where partials\PartialRendering.cshtml is a relative to the template root folder. The folder host example lets you load up templates from disk and display the result in a Web Browser control which demonstrates using Razor HTML output from templates that contain HTML syntax which happens to me my target scenario for Html Help Builder. The Razor Engine Wrapper Project The project I created to wrap Razor hosting has a fair bit of code and a number of classes associated with it. Most of the components are internally used and as you can see using the final RazorEngine<T> and HostContainer classes is pretty easy. The classes are extensible and I suspect developers will want to build more customized host containers for their applications. Host containers are the key to wrapping up all functionality – Engine, BaseTemplate, AppDomain Hosting, Caching etc in a logical piece that is ready to be plugged into an application. When looking at the code there are a couple of core features provided: Core Razor Engine Hosting This is the core Razor hosting which provides the basics of loading a template, compiling it into an assembly and executing it. This is fairly straightforward, but without a host container that can cache assemblies based on some criteria templates are recompiled and re-created each time which is inefficient (although pretty fast). The base engine wrapper implementation also supports hosting the Razor runtime in a separate AppDomain for security and the ability to unload it on demand. Host Containers The engine hosting itself doesn’t provide any sort of ‘runtime’ service like picking up files from disk, caching assemblies and so forth. So my implementation provides two HostContainers: RazorFolderHostContainer and RazorStringHostContainer. The FolderHost works off a base directory and loads templates based on relative paths (sort of like the ASP.NET runtime does off a virtual). The HostContainers also deal with caching of template assemblies – for the folder host the file date is tracked and checked for updates and unless the template is changed a cached assembly is reused. The StringHostContainer similiarily checks string hashes to figure out whether a particular string template was previously compiled and executed. The HostContainers also act as a simple startup environment and a single reference to easily store and reuse in an application. TemplateBase Classes The template base classes are the base classes that from which the Razor engine generates .NET code. A template is parsed into a class with an Execute() method and the class is based on this template type you can specify. RazorEngine<TBaseTemplate> can receive this type and the HostContainers default to specific templates in their base implementations. Template classes are customizable to allow you to create templates that provide application specific features and interaction from the template to your host application. How does the RazorEngine wrapper work? You can browse the source code in the links above or in the repository or download the source, but I’ll highlight some key features here. Here’s part of the RazorEngine implementation that can be used to host the runtime and that demonstrates the key code required to host the Razor runtime. The RazorEngine class is implemented as a generic class to reflect the Template base class type: public class RazorEngine<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase The generic type is used to internally provide easier access to the template type and assignments on it as part of the template processing. The class also inherits MarshalByRefObject to allow execution over AppDomain boundaries – something that all the classes discussed here need to do since there is much interaction between the host and the template. The first two key methods deal with creating a template assembly: /// <summary> /// Creates an instance of the RazorHost with various options applied. /// Applies basic namespace imports and the name of the class to generate /// </summary> /// <param name="generatedNamespace"></param> /// <param name="generatedClass"></param> /// <returns></returns> protected RazorTemplateEngine CreateHost(string generatedNamespace, string generatedClass) { Type baseClassType = typeof(TBaseTemplateType); RazorEngineHost host = new RazorEngineHost(new CSharpRazorCodeLanguage()); host.DefaultBaseClass = baseClassType.FullName; host.DefaultClassName = generatedClass; host.DefaultNamespace = generatedNamespace; host.NamespaceImports.Add("System"); host.NamespaceImports.Add("System.Text"); host.NamespaceImports.Add("System.Collections.Generic"); host.NamespaceImports.Add("System.Linq"); host.NamespaceImports.Add("System.IO"); return new RazorTemplateEngine(host); } /// <summary> /// Parses and compiles a markup template into an assembly and returns /// an assembly name. The name is an ID that can be passed to /// ExecuteTemplateByAssembly which picks up a cached instance of the /// loaded assembly. /// /// </summary> /// <param name="namespaceOfGeneratedClass">The namespace of the class to generate from the template</param> /// <param name="generatedClassName">The name of the class to generate from the template</param> /// <param name="ReferencedAssemblies">Any referenced assemblies by dll name only. Assemblies must be in execution path of host or in GAC.</param> /// <param name="templateSourceReader">Textreader that loads the template</param> /// <remarks> /// The actual assembly isn't returned here to allow for cross-AppDomain /// operation. If the assembly was returned it would fail for cross-AppDomain /// calls. /// </remarks> /// <returns>An assembly Id. The Assembly is cached in memory and can be used with RenderFromAssembly.</returns> public string ParseAndCompileTemplate( string namespaceOfGeneratedClass, string generatedClassName, string[] ReferencedAssemblies, TextReader templateSourceReader) { RazorTemplateEngine engine = CreateHost(namespaceOfGeneratedClass, generatedClassName); // Generate the template class as CodeDom GeneratorResults razorResults = engine.GenerateCode(templateSourceReader); // Create code from the codeDom and compile CSharpCodeProvider codeProvider = new CSharpCodeProvider(); CodeGeneratorOptions options = new CodeGeneratorOptions(); // Capture Code Generated as a string for error info // and debugging LastGeneratedCode = null; using (StringWriter writer = new StringWriter()) { codeProvider.GenerateCodeFromCompileUnit(razorResults.GeneratedCode, writer, options); LastGeneratedCode = writer.ToString(); } CompilerParameters compilerParameters = new CompilerParameters(ReferencedAssemblies); // Standard Assembly References compilerParameters.ReferencedAssemblies.Add("System.dll"); compilerParameters.ReferencedAssemblies.Add("System.Core.dll"); compilerParameters.ReferencedAssemblies.Add("Microsoft.CSharp.dll"); // dynamic support! // Also add the current assembly so RazorTemplateBase is available compilerParameters.ReferencedAssemblies.Add(Assembly.GetExecutingAssembly().CodeBase.Substring(8)); compilerParameters.GenerateInMemory = Configuration.CompileToMemory; if (!Configuration.CompileToMemory) compilerParameters.OutputAssembly = Path.Combine(Configuration.TempAssemblyPath, "_" + Guid.NewGuid().ToString("n") + ".dll"); CompilerResults compilerResults = codeProvider.CompileAssemblyFromDom(compilerParameters, razorResults.GeneratedCode); if (compilerResults.Errors.Count > 0) { var compileErrors = new StringBuilder(); foreach (System.CodeDom.Compiler.CompilerError compileError in compilerResults.Errors) compileErrors.Append(String.Format(Resources.LineX0TColX1TErrorX2RN, compileError.Line, compileError.Column, compileError.ErrorText)); this.SetError(compileErrors.ToString() + "\r\n" + LastGeneratedCode); return null; } AssemblyCache.Add(compilerResults.CompiledAssembly.FullName, compilerResults.CompiledAssembly); return compilerResults.CompiledAssembly.FullName; } Think of the internal CreateHost() method as setting up the assembly generated from each template. Each template compiles into a separate assembly. It sets up namespaces, and assembly references, the base class used and the name and namespace for the generated class. ParseAndCompileTemplate() then calls the CreateHost() method to receive the template engine generator which effectively generates a CodeDom from the template – the template is turned into .NET code. The code generated from our earlier example looks something like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace RazorTest { using System; using System.Text; using System.Collections.Generic; using System.Linq; using System.IO; using System.Reflection; public class RazorTemplate : RazorHosting.RazorTemplateBase { #line hidden public RazorTemplate() { } public override void Execute() { WriteLiteral("Hello "); Write(Context.FirstName); WriteLiteral("! Your entry was entered on: "); Write(Context.Entered); WriteLiteral("\r\n\r\n"); // Code block: Update the host Windows Form passed in through the context Context.WinForm.Text = "Hello World from Razor at " + DateTime.Now.ToString(); WriteLiteral("\r\nAppDomain Id:\r\n "); Write(AppDomain.CurrentDomain.FriendlyName); WriteLiteral("\r\n \r\nAssembly:\r\n "); Write(Assembly.GetExecutingAssembly().FullName); WriteLiteral("\r\n\r\nCode based output: \r\n"); // Write output with Response object from code string output = string.Empty; for (int i = 0; i < 10; i++) { output += i.ToString() + " "; } } } } Basically the template’s body is turned into code in an Execute method that is called. Internally the template’s Write method is fired to actually generate the output. Note that the class inherits from RazorTemplateBase which is the generic parameter I used to specify the base class when creating an instance in my RazorEngine host: var engine = new RazorEngine<RazorTemplateBase>(); This template class must be provided and it must implement an Execute() and Write() method. Beyond that you can create any class you chose and attach your own properties. My RazorTemplateBase class implementation is very simple: public class RazorTemplateBase : MarshalByRefObject, IDisposable { /// <summary> /// You can pass in a generic context object /// to use in your template code /// </summary> public dynamic Context { get; set; } /// <summary> /// Class that generates output. Currently ultra simple /// with only Response.Write() implementation. /// </summary> public RazorResponse Response { get; set; } public object HostContainer {get; set; } public object Engine { get; set; } public RazorTemplateBase() { Response = new RazorResponse(); } public virtual void Write(object value) { Response.Write(value); } public virtual void WriteLiteral(object value) { Response.Write(value); } /// <summary> /// Razor Parser implements this method /// </summary> public virtual void Execute() {} public virtual void Dispose() { if (Response != null) { Response.Dispose(); Response = null; } } } Razor fills in the Execute method when it generates its subclass and uses the Write() method to output content. As you can see I use a RazorResponse() class here to generate output. This isn’t necessary really, as you could use a StringBuilder or StringWriter() directly, but I prefer using Response object so I can extend the Response behavior as needed. The RazorResponse class is also very simple and merely acts as a wrapper around a TextWriter: public class RazorResponse : IDisposable { /// <summary> /// Internal text writer - default to StringWriter() /// </summary> public TextWriter Writer = new StringWriter(); public virtual void Write(object value) { Writer.Write(value); } public virtual void WriteLine(object value) { Write(value); Write("\r\n"); } public virtual void WriteFormat(string format, params object[] args) { Write(string.Format(format, args)); } public override string ToString() { return Writer.ToString(); } public virtual void Dispose() { Writer.Close(); } public virtual void SetTextWriter(TextWriter writer) { // Close original writer if (Writer != null) Writer.Close(); Writer = writer; } } The Rendering Methods of RazorEngine At this point I’ve talked about the assembly generation logic and the template implementation itself. What’s left is that once you’ve generated the assembly is to execute it. The code to do this is handled in the various RenderXXX methods of the RazorEngine class. Let’s look at the lowest level one of these which is RenderTemplateFromAssembly() and a couple of internal support methods that handle instantiating and invoking of the generated template method: public string RenderTemplateFromAssembly( string assemblyId, string generatedNamespace, string generatedClass, object context, TextWriter outputWriter) { this.SetError(); Assembly generatedAssembly = AssemblyCache[assemblyId]; if (generatedAssembly == null) { this.SetError(Resources.PreviouslyCompiledAssemblyNotFound); return null; } string className = generatedNamespace + "." + generatedClass; Type type; try { type = generatedAssembly.GetType(className); } catch (Exception ex) { this.SetError(Resources.UnableToCreateType + className + ": " + ex.Message); return null; } // Start with empty non-error response (if we use a writer) string result = string.Empty; using(TBaseTemplateType instance = InstantiateTemplateClass(type)) { if (instance == null) return null; if (outputWriter != null) instance.Response.SetTextWriter(outputWriter); if (!InvokeTemplateInstance(instance, context)) return null; // Capture string output if implemented and return // otherwise null is returned if (outputWriter == null) result = instance.Response.ToString(); } return result; } protected virtual TBaseTemplateType InstantiateTemplateClass(Type type) { TBaseTemplateType instance = Activator.CreateInstance(type) as TBaseTemplateType; if (instance == null) { SetError(Resources.CouldnTActivateTypeInstance + type.FullName); return null; } instance.Engine = this; // If a HostContainer was set pass that to the template too instance.HostContainer = this.HostContainer; return instance; } /// <summary> /// Internally executes an instance of the template, /// captures errors on execution and returns true or false /// </summary> /// <param name="instance">An instance of the generated template</param> /// <returns>true or false - check ErrorMessage for errors</returns> protected virtual bool InvokeTemplateInstance(TBaseTemplateType instance, object context) { try { instance.Context = context; instance.Execute(); } catch (Exception ex) { this.SetError(Resources.TemplateExecutionError + ex.Message); return false; } finally { // Must make sure Response is closed instance.Response.Dispose(); } return true; } The RenderTemplateFromAssembly method basically requires the namespace and class to instantate and creates an instance of the class using InstantiateTemplateClass(). It then invokes the method with InvokeTemplateInstance(). These two methods are broken out because they are re-used by various other rendering methods and also to allow subclassing and providing additional configuration tasks to set properties and pass values to templates at execution time. In the default mode instantiation sets the Engine and HostContainer (discussed later) so the template can call back into the template engine, and the context is set when the template method is invoked. The various RenderXXX methods use similar code although they create the assemblies first. If you’re after potentially cashing assemblies the method is the one to call and that’s exactly what the two HostContainer classes do. More on that in a minute, but before we get into HostContainers let’s talk about AppDomain hosting and the like. Running Templates in their own AppDomain With the RazorEngine class above, when a template is parsed into an assembly and executed the assembly is created (in memory or on disk – you can configure that) and cached in the current AppDomain. In .NET once an assembly has been loaded it can never be unloaded so if you’re loading lots of templates and at some time you want to release them there’s no way to do so. If however you load the assemblies in a separate AppDomain that new AppDomain can be unloaded and the assemblies loaded in it with it. In order to host the templates in a separate AppDomain the easiest thing to do is to run the entire RazorEngine in a separate AppDomain. Then all interaction occurs in the other AppDomain and no further changes have to be made. To facilitate this there is a RazorEngineFactory which has methods that can instantiate the RazorHost in a separate AppDomain as well as in the local AppDomain. The host creates the remote instance and then hangs on to it to keep it alive as well as providing methods to shut down the AppDomain and reload the engine. Sounds complicated but cross-AppDomain invocation is actually fairly easy to implement. Here’s some of the relevant code from the RazorEngineFactory class. Like the RazorEngine this class is generic and requires a template base type in the generic class name: public class RazorEngineFactory<TBaseTemplateType> where TBaseTemplateType : RazorTemplateBase Here are the key methods of interest: /// <summary> /// Creates an instance of the RazorHost in a new AppDomain. This /// version creates a static singleton that that is cached and you /// can call UnloadRazorHostInAppDomain to unload it. /// </summary> /// <returns></returns> public static RazorEngine<TBaseTemplateType> CreateRazorHostInAppDomain() { if (Current == null) Current = new RazorEngineFactory<TBaseTemplateType>(); return Current.GetRazorHostInAppDomain(); } public static void UnloadRazorHostInAppDomain() { if (Current != null) Current.UnloadHost(); Current = null; } /// <summary> /// Instance method that creates a RazorHost in a new AppDomain. /// This method requires that you keep the Factory around in /// order to keep the AppDomain alive and be able to unload it. /// </summary> /// <returns></returns> public RazorEngine<TBaseTemplateType> GetRazorHostInAppDomain() { LocalAppDomain = CreateAppDomain(null); if (LocalAppDomain == null) return null; /// Create the instance inside of the new AppDomain /// Note: remote domain uses local EXE's AppBasePath!!! RazorEngine<TBaseTemplateType> host = null; try { Assembly ass = Assembly.GetExecutingAssembly(); string AssemblyPath = ass.Location; host = (RazorEngine<TBaseTemplateType>) LocalAppDomain.CreateInstanceFrom(AssemblyPath, typeof(RazorEngine<TBaseTemplateType>).FullName).Unwrap(); } catch (Exception ex) { ErrorMessage = ex.Message; return null; } return host; } /// <summary> /// Internally creates a new AppDomain in which Razor templates can /// be run. /// </summary> /// <param name="appDomainName"></param> /// <returns></returns> private AppDomain CreateAppDomain(string appDomainName) { if (appDomainName == null) appDomainName = "RazorHost_" + Guid.NewGuid().ToString("n"); AppDomainSetup setup = new AppDomainSetup(); // *** Point at current directory setup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; AppDomain localDomain = AppDomain.CreateDomain(appDomainName, null, setup); return localDomain; } /// <summary> /// Allow unloading of the created AppDomain to release resources /// All internal resources in the AppDomain are released including /// in memory compiled Razor assemblies. /// </summary> public void UnloadHost() { if (this.LocalAppDomain != null) { AppDomain.Unload(this.LocalAppDomain); this.LocalAppDomain = null; } } The static CreateRazorHostInAppDomain() is the key method that startup code usually calls. It uses a Current singleton instance to an instance of itself that is created cross AppDomain and is kept alive because it’s static. GetRazorHostInAppDomain actually creates a cross-AppDomain instance which first creates a new AppDomain and then loads the RazorEngine into it. The remote Proxy instance is returned as a result to the method and can be used the same as a local instance. The code to run with a remote AppDomain is simple: private RazorEngine<RazorTemplateBase> CreateHost() { if (this.Host != null) return this.Host; // Use Static Methods - no error message if host doesn't load this.Host = RazorEngineFactory<RazorTemplateBase>.CreateRazorHostInAppDomain(); if (this.Host == null) { MessageBox.Show("Unable to load Razor Template Host", "Razor Hosting", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); } return this.Host; } This code relies on a local reference of the Host which is kept around for the duration of the app (in this case a form reference). To use this you’d simply do: this.Host = CreateHost(); if (host == null) return; string result = host.RenderTemplate( this.txtSource.Text, new string[] { "System.Windows.Forms.dll", "Westwind.Utilities.dll" }, this.CustomContext); if (result == null) { MessageBox.Show(host.ErrorMessage, "Template Execution Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); return; } this.txtResult.Text = result; Now all templates run in a remote AppDomain and can be unloaded with simple code like this: RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Host = null; One Step further – Providing a caching ‘Runtime’ Once we can load templates in a remote AppDomain we can add some additional functionality like assembly caching based on application specific features. One of my typical scenarios is to render templates out of a scripts folder. So all templates live in a folder and they change infrequently. So a Folder based host that can compile these templates once and then only recompile them if something changes would be ideal. Enter host containers which are basically wrappers around the RazorEngine<t> and RazorEngineFactory<t>. They provide additional logic for things like file caching based on changes on disk or string hashes for string based template inputs. The folder host also provides for partial rendering logic through a custom template base implementation. There’s a base implementation in RazorBaseHostContainer, which provides the basics for hosting a RazorEngine, which includes the ability to start and stop the engine, cache assemblies and add references: public abstract class RazorBaseHostContainer<TBaseTemplateType> : MarshalByRefObject where TBaseTemplateType : RazorTemplateBase, new() { public RazorBaseHostContainer() { UseAppDomain = true; GeneratedNamespace = "__RazorHost"; } /// <summary> /// Determines whether the Container hosts Razor /// in a separate AppDomain. Seperate AppDomain /// hosting allows unloading and releasing of /// resources. /// </summary> public bool UseAppDomain { get; set; } /// <summary> /// Base folder location where the AppDomain /// is hosted. By default uses the same folder /// as the host application. /// /// Determines where binary dependencies are /// found for assembly references. /// </summary> public string BaseBinaryFolder { get; set; } /// <summary> /// List of referenced assemblies as string values. /// Must be in GAC or in the current folder of the host app/ /// base BinaryFolder /// </summary> public List<string> ReferencedAssemblies = new List<string>(); /// <summary> /// Name of the generated namespace for template classes /// </summary> public string GeneratedNamespace {get; set; } /// <summary> /// Any error messages /// </summary> public string ErrorMessage { get; set; } /// <summary> /// Cached instance of the Host. Required to keep the /// reference to the host alive for multiple uses. /// </summary> public RazorEngine<TBaseTemplateType> Engine; /// <summary> /// Cached instance of the Host Factory - so we can unload /// the host and its associated AppDomain. /// </summary> protected RazorEngineFactory<TBaseTemplateType> EngineFactory; /// <summary> /// Keep track of each compiled assembly /// and when it was compiled. /// /// Use a hash of the string to identify string /// changes. /// </summary> protected Dictionary<int, CompiledAssemblyItem> LoadedAssemblies = new Dictionary<int, CompiledAssemblyItem>(); /// <summary> /// Call to start the Host running. Follow by a calls to RenderTemplate to /// render individual templates. Call Stop when done. /// </summary> /// <returns>true or false - check ErrorMessage on false </returns> public virtual bool Start() { if (Engine == null) { if (UseAppDomain) Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHostInAppDomain(); else Engine = RazorEngineFactory<TBaseTemplateType>.CreateRazorHost(); Engine.Configuration.CompileToMemory = true; Engine.HostContainer = this; if (Engine == null) { this.ErrorMessage = EngineFactory.ErrorMessage; return false; } } return true; } /// <summary> /// Stops the Host and releases the host AppDomain and cached /// assemblies. /// </summary> /// <returns>true or false</returns> public bool Stop() { this.LoadedAssemblies.Clear(); RazorEngineFactory<RazorTemplateBase>.UnloadRazorHostInAppDomain(); this.Engine = null; return true; } … } This base class provides most of the mechanics to host the runtime, but no application specific implementation for rendering. There are rendering functions but they just call the engine directly and provide no caching – there’s no context to decide how to cache and reuse templates. The key methods are Start and Stop and their main purpose is to start a new AppDomain (optionally) and shut it down when requested. The RazorFolderHostContainer – Folder Based Runtime Hosting Let’s look at the more application specific RazorFolderHostContainer implementation which is defined like this: public class RazorFolderHostContainer : RazorBaseHostContainer<RazorTemplateFolderHost> Note that a customized RazorTemplateFolderHost class template is used for this implementation that supports partial rendering in form of a RenderPartial() method that’s available to templates. The folder host’s features are: Render templates based on a Template Base Path (a ‘virtual’ if you will) Cache compiled assemblies based on the relative path and file time stamp File changes on templates cause templates to be recompiled into new assemblies Support for partial rendering using base folder relative pathing As shown in the startup examples earlier host containers require some startup code with a HostContainer tied to a persistent property (like a Form property): // The base path for templates - templates are rendered with relative paths // based on this path. HostContainer.TemplatePath = Path.Combine(Environment.CurrentDirectory, TemplateBaseFolder); // Default output rendering disk location HostContainer.RenderingOutputFile = Path.Combine(HostContainer.TemplatePath, "__Preview.htm"); // Add any assemblies you want reference in your templates HostContainer.ReferencedAssemblies.Add("System.Windows.Forms.dll"); // Start up the host container HostContainer.Start(); Once that’s done, you can render templates with the host container: // Pass the template path for full filename seleted with OpenFile Dialog // relativepath is: subdir\file.cshtml or file.cshtml or ..\file.cshtml var relativePath = Utilities.GetRelativePath(fileName, HostContainer.TemplatePath); if (!HostContainer.RenderTemplate(relativePath, Context, HostContainer.RenderingOutputFile)) { MessageBox.Show("Error: " + HostContainer.ErrorMessage); return; } webBrowser1.Navigate("file://" + HostContainer.RenderingOutputFile); The most critical task of the RazorFolderHostContainer implementation is to retrieve a template from disk, compile and cache it and then deal with deciding whether subsequent requests need to re-compile the template or simply use a cached version. Internally the GetAssemblyFromFileAndCache() handles this task: /// <summary> /// Internally checks if a cached assembly exists and if it does uses it /// else creates and compiles one. Returns an assembly Id to be /// used with the LoadedAssembly list. /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> protected virtual CompiledAssemblyItem GetAssemblyFromFileAndCache(string relativePath) { string fileName = Path.Combine(TemplatePath, relativePath).ToLower(); int fileNameHash = fileName.GetHashCode(); if (!File.Exists(fileName)) { this.SetError(Resources.TemplateFileDoesnTExist + fileName); return null; } CompiledAssemblyItem item = null; this.LoadedAssemblies.TryGetValue(fileNameHash, out item); string assemblyId = null; // Check for cached instance if (item != null) { var fileTime = File.GetLastWriteTimeUtc(fileName); if (fileTime <= item.CompileTimeUtc) assemblyId = item.AssemblyId; } else item = new CompiledAssemblyItem(); // No cached instance - create assembly and cache if (assemblyId == null) { string safeClassName = GetSafeClassName(fileName); StreamReader reader = null; try { reader = new StreamReader(fileName, true); } catch (Exception ex) { this.SetError(Resources.ErrorReadingTemplateFile + fileName); return null; } assemblyId = Engine.ParseAndCompileTemplate(this.ReferencedAssemblies.ToArray(), reader); // need to ensure reader is closed if (reader != null) reader.Close(); if (assemblyId == null) { this.SetError(Engine.ErrorMessage); return null; } item.AssemblyId = assemblyId; item.CompileTimeUtc = DateTime.UtcNow; item.FileName = fileName; item.SafeClassName = safeClassName; this.LoadedAssemblies[fileNameHash] = item; } return item; } This code uses a LoadedAssembly dictionary which is comprised of a structure that holds a reference to a compiled assembly, a full filename and file timestamp and an assembly id. LoadedAssemblies (defined on the base class shown earlier) is essentially a cache for compiled assemblies and they are identified by a hash id. In the case of files the hash is a GetHashCode() from the full filename of the template. The template is checked for in the cache and if not found the file stamp is checked. If that’s newer than the cache’s compilation date the template is recompiled otherwise the version in the cache is used. All the core work defers to a RazorEngine<T> instance to ParseAndCompileTemplate(). The three rendering specific methods then are rather simple implementations with just a few lines of code dealing with parameter and return value parsing: /// <summary> /// Renders a template to a TextWriter. Useful to write output into a stream or /// the Response object. Used for partial rendering. /// </summary> /// <param name="relativePath">Relative path to the file in the folder structure</param> /// <param name="context">Optional context object or null</param> /// <param name="writer">The textwriter to write output into</param> /// <returns></returns> public bool RenderTemplate(string relativePath, object context, TextWriter writer) { // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; CompiledAssemblyItem item = GetAssemblyFromFileAndCache(relativePath); if (item == null) { writer.Close(); return false; } try { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error string result = Engine.RenderTemplateFromAssembly(item.AssemblyId, context, writer); if (result == null) { this.SetError(Engine.ErrorMessage); return false; } } catch (Exception ex) { this.SetError(ex.Message); return false; } finally { writer.Close(); } return true; } /// <summary> /// Render a template from a source file on disk to a specified outputfile. /// </summary> /// <param name="relativePath">Relative path off the template root folder. Format: path/filename.cshtml</param> /// <param name="context">Any object that will be available in the template as a dynamic of this.Context</param> /// <param name="outputFile">Optional - output file where output is written to. If not specified the /// RenderingOutputFile property is used instead /// </param> /// <returns>true if rendering succeeds, false on failure - check ErrorMessage</returns> public bool RenderTemplate(string relativePath, object context, string outputFile) { if (outputFile == null) outputFile = RenderingOutputFile; try { using (StreamWriter writer = new StreamWriter(outputFile, false, Engine.Configuration.OutputEncoding, Engine.Configuration.StreamBufferSize)) { return RenderTemplate(relativePath, context, writer); } } catch (Exception ex) { this.SetError(ex.Message); return false; } return true; } /// <summary> /// Renders a template to string. Useful for RenderTemplate /// </summary> /// <param name="relativePath"></param> /// <param name="context"></param> /// <returns></returns> public string RenderTemplateToString(string relativePath, object context) { string result = string.Empty; try { using (StringWriter writer = new StringWriter()) { // String result will be empty as output will be rendered into the // Response object's stream output. However a null result denotes // an error if (!RenderTemplate(relativePath, context, writer)) { this.SetError(Engine.ErrorMessage); return null; } result = writer.ToString(); } } catch (Exception ex) { this.SetError(ex.Message); return null; } return result; } The idea is that you can create custom host container implementations that do exactly what you want fairly easily. Take a look at both the RazorFolderHostContainer and RazorStringHostContainer classes for the basic concepts you can use to create custom implementations. Notice also that you can set the engine’s PerRequestConfigurationData() from the host container: // Set configuration data that is to be passed to the template (any object) Engine.TemplatePerRequestConfigurationData = new RazorFolderHostTemplateConfiguration() { TemplatePath = Path.Combine(this.TemplatePath, relativePath), TemplateRelativePath = relativePath, }; which when set to a non-null value is passed to the Template’s InitializeTemplate() method. This method receives an object parameter which you can cast as needed: public override void InitializeTemplate(object configurationData) { // Pick up configuration data and stuff into Request object RazorFolderHostTemplateConfiguration config = configurationData as RazorFolderHostTemplateConfiguration; this.Request.TemplatePath = config.TemplatePath; this.Request.TemplateRelativePath = config.TemplateRelativePath; } With this data you can then configure any custom properties or objects on your main template class. It’s an easy way to pass data from the HostContainer all the way down into the template. The type you use is of type object so you have to cast it yourself, and it must be serializable since it will likely run in a separate AppDomain. This might seem like an ugly way to pass data around – normally I’d use an event delegate to call back from the engine to the host, but since this is running over AppDomain boundaries events get really tricky and passing a template instance back up into the host over AppDomain boundaries doesn’t work due to serialization issues. So it’s easier to pass the data from the host down into the template using this rather clumsy approach of set and forward. It’s ugly, but it’s something that can be hidden in the host container implementation as I’ve done here. It’s also not something you have to do in every implementation so this is kind of an edge case, but I know I’ll need to pass a bunch of data in some of my applications and this will be the easiest way to do so. Summing Up Hosting the Razor runtime is something I got jazzed up about quite a bit because I have an immediate need for this type of templating/merging/scripting capability in an application I’m working on. I’ve also been using templating in many apps and it’s always been a pain to deal with. The Razor engine makes this whole experience a lot cleaner and more light weight and with these wrappers I can now plug .NET based templating into my code literally with a few lines of code. That’s something to cheer about… I hope some of you will find this useful as well… Resources The examples and code require that you download the Razor runtimes. Projects are for Visual Studio 2010 running on .NET 4.0 Platform Installer 3.0 (install WebMatrix or MVC 3 for Razor Runtimes) Latest Code in Subversion Repository Download Snapshot of the Code Documentation (CHM Help File) © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET .NET

Read the article

Solution: Testing Web Services with MSTest on Team Build

- by Martin Hinshelwood

Guess what. About 20 minutes after I fixed the build, Allan broke it again! Update: 4th March 2010 – After having huge problems getting this working I read Billy Wang’s post which showed me the light. The problem here is that even though the test passes locally it will not during an Automated Build. When you send your tests to the build server it does not understand that you want to spin up the web site and run tests against that! When you run the test in Visual Studio it spins up the web site anyway, but would you expect your test to pass if you told the website not to spin up? Of course not. So, when you send the code to the build server you need to tell it what to spin up. First, the best way to get the parameters you need is to right click on the method you want to test and select “Create Unit Test”. This will detect wither you are running in IIS or ASP.NET Development Server or None, and create the relevant tags. Figure: Right clicking on “SaveDefaultProjectFile” will produce a context menu with “Create Unit tests…” on it. If you use this option it will AutoDetect most of the Attributes that are required. /// <summary> ///A test for SSW.SQLDeploy.SilverlightUI.Web.Services.IProfileService.SaveDefaultProjectFile ///</summary> // TODO: Ensure that the UrlToTest attribute specifies a URL to an ASP.NET page (for example, // http://.../Default.aspx). This is necessary for the unit test to be executed on the web server, // whether you are testing a page, web service, or a WCF service. [TestMethod()] [HostType("ASP.NET")] [AspNetDevelopmentServerHost("D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web", "/")] [UrlToTest("http://localhost:3100/")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] public void SaveDefaultProjectFileTest() { IProfileService target = new ProfileService(); // TODO: Initialize to an appropriate value string strComputerName = string.Empty; // TODO: Initialize to an appropriate value bool expected = false; // TODO: Initialize to an appropriate value bool actual; actual = target.SaveDefaultProjectFile(strComputerName); Assert.AreEqual(expected, actual); Assert.Inconclusive("Verify the correctness of this test method."); } Figure: Auto created code that shows the attributes required to run correctly in IIS or in this case ASP.NET Development Server If you are a purist and don’t like creating unit tests like this then you just need to add the three attributes manually. HostType – This attribute specified what host to use. Its an extensibility point, so you could write your own. Or you could just use “ASP.NET”. UrlToTest – This specifies the start URL. For most tests it does not matter which page you call, as long as it is a valid page otherwise your test may not run on the server, but may pass anyway. AspNetDevelopmentServerHost – This is a nasty one, it is only used if you are using ASP.NET Development Host and is unnecessary if you are using IIS. This sets the host settings and the first value MUST be the physical path to the root of your web application. OK, so all that was rubbish and I could not get anything working using the MSDN documentation. Google provided very little help until I ran into Billy Wang’s post and I heard that heavenly music that all developers hear when understanding dawns that what they have been doing up until now is just plain stupid. I am sure that the above will work when I am doing Web Unit Tests, but there is a much easier way when doing web services. You need to add the AspNetDevelopmentServer attribute to your code. This will tell MSTest to spin up an ASP.NET Development server to host the service. Specify the path to the web application you want to use. [AspNetDevelopmentServer("WebApp1", "D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: This AspNetDevelopmentServer will make sure that the specified web application is launched. Now we can run the test and have it pass, but if the dynamically assigned ASP.NET Development server port changes what happens to the details in your app.config that was generated when creating a reference to the web service? Well, it would be wrong and the test would fail. This is where Billy’s helper method comes in. Once you have created an instance of your service call, and it has loaded the config, but before you make any calls to it you need to go in and dynamically set the Endpoint address to the same address as your dynamically hosted Web Application. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.VisualStudio.TestTools.UnitTesting; using System.Reflection; using System.ServiceModel.Description; using System.ServiceModel; namespace SSW.SQLDeploy.Test { class WcfWebServiceHelper { public static bool TryUrlRedirection(object client, TestContext context, string identifier) { bool result = true; try { PropertyInfo property = client.GetType().GetProperty("Endpoint"); string webServer = context.Properties[string.Format("AspNetDevelopmentServer.{0}", identifier)].ToString(); Uri webServerUri = new Uri(webServer); ServiceEndpoint endpoint = (ServiceEndpoint)property.GetValue(client, null); EndpointAddressBuilder builder = new EndpointAddressBuilder(endpoint.Address); builder.Uri = new Uri(endpoint.Address.Uri.OriginalString.Replace(endpoint.Address.Uri.Authority, webServerUri.Authority)); endpoint.Address = builder.ToEndpointAddress(); } catch (Exception e) { context.WriteLine(e.Message); result = false; } return result; } } } Figure: This fixes a problem with the URL in your web.config not being the same as the dynamically hosted ASP.NET Development server port. We can now add a call to this method after we created the Proxy object and change the Endpoint for the Service to the correct one. This process is wrapped in an assert as if it fails there is no point in continuing. [AspNetDevelopmentServer("WebApp1", D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Editing the Endpoint from the app.config on the fly to match the dynamically hosted ASP.NET Development Server URL and port is now easy. As you can imagine AspNetDevelopmentServer poses some problems of you have multiple developers. What are the chances of everyone using the same location to store the source? What about if you are using a build server, how do you tell MSTest where to look for the files? To the rescue is a property called" “%PathToWebRoot%” which is always right on the build server. It will always point to your build drop folder for your solutions web sites. Which will be “\\tfs.ssw.com.au\BuildDrop\[BuildName]\Debug\_PrecompiledWeb\” or whatever your build drop location is. So lets change the code above to add this. [AspNetDevelopmentServer("WebApp1", "%PathToWebRoot%\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Adding %PathToWebRoot% to the AspNetDevelopmentServer path makes it work everywhere. Now we have another problem… this will ONLY run on the build server and will fail locally as %PathToWebRoot%’s default value is “C:\Users\[profile]\Documents\Visual Studio 2010\Projects”. Well this sucks… How do we get the test to run on any build server and any developer laptop. Open “Tools | Options | Test Tools | Test Execution” in Visual Studio and you will see a field called “Web application root directory”. This is where you override that default above. Figure: You can override the default website location for tests. In my case I would put in “D:\Workspaces\SSW\SSW\SqlDeploy\DEV\Main” and all the developers working with this branch would put in the folder that they have mapped. Can you see a problem? What is I create a “$/SSW/SqlDeploy/DEV/34567” branch from Main and I want to run tests in there. Well… I would have to change the value above. This is not ideal, but as you can put your projects anywhere on a computer, it has to be done. Conclusion Although this looks convoluted and complicated there are real problems being solved here that mean that you have a test ANYWHERE solution. Any build server, any Developer workstation. Resources: http://billwg.blogspot.com/2009/06/testing-wcf-web-services.html http://tough-to-find.blogspot.com/2008/04/testing-asmx-web-services-in-visual.html http://msdn.microsoft.com/en-us/library/ms243399(VS.100).aspx http://blogs.msdn.com/dscruggs/archive/2008/09/29/web-tests-unit-tests-the-asp-net-development-server-and-code-coverage.aspx http://www.5z5.com/News/?543f8bc8b36b174f Technorati Tags: VS2010,MSTest,Team Build 2010,Team Build,Visual Studio,Visual Studio 2010,Visual Studio ALM,Team Test,Team Test 2010

Read the article

Upgrading from TFS 2010 RC to TFS 2010 RTM done

- by Martin Hinshelwood

Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010 – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes. We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system. Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010. Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010 and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS) It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release. Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers. Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later. You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery. Figure: Now we have everything setup the configuration wizard can do its work. Figure: Took a while on the “Web site” stage for some point, but zipped though after that. Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace: at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace: at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url) at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft. Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010. Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic. Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well. Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

Read the article

ASP.NET Podcast Show #148 - ASP.NET WebForms to build a Mobile Web Application

- by Wallym

Check the podcast site for the original url. This is the video and source code for an ASP.NET WebForms app that I wrote that is optimized for the iPhone and mobile environments. Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download M4V for iPhone/iPad. Download MP3. Link to iWebKit. Source Code: <%@ Page Title="MapSplore" Language="C#" MasterPageFile="iPhoneMaster.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="AT_iPhone_Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="Content" Runat="Server" ClientIDMode="Static"> <asp:ScriptManager ID="sm" runat="server" EnablePartialRendering="true" EnableHistory="false" EnableCdn="true" /> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script language="javascript" type="text/javascript">  </script> <asp:HiddenField ID="Latitude" runat="server" /> <asp:HiddenField ID="Longitude" runat="server" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js%22%3E%3C/script> <script language="javascript" type="text/javascript"> $(document).ready(function () { GetLocation(); setupMapDiv(); setupPlaceIveBeen(); }); function GetLocation() { if (navigator.geolocation != null) { navigator.geolocation.getCurrentPosition(getData); } else { var mess = document.getElementById('<%=Message.ClientID %>'); mess.innerHTML = "Sorry, your browser does not support geolocation. " + "Try the latest version of Safari on the iPhone, Android browser, or the latest version of FireFox."; } } function UpdateLocation_Click() { GetLocation(); } function getData(position) { var latitude = position.coords.latitude; var longitude = position.coords.longitude; var hdLat = document.getElementById('<%=Latitude.ClientID %>'); var hdLon = document.getElementById('<%=Longitude.ClientID %>'); hdLat.value = latitude; hdLon.value = longitude; } </script> <asp:Label ID="Message" runat="server" /> <asp:UpdatePanel ID="upl" runat="server"> <ContentTemplate> <asp:Panel ID="pnlStart" runat="server" Visible="true"> <div id="topbar"> <div id="title">MapSplore</div> </div> <div id="content"> <ul class="pageitem"> <li class="menu"> <asp:LinkButton ID="lbLocalDeals" runat="server" onclick="lbLocalDeals_Click"> <asp:Image ID="imLocalDeals" runat="server" ImageUrl="~/Images/ArtFavor_Money_Bag_Icon.png" Height="30" /> <span class="name">Local Deals.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbLocalPlaces" runat="server" onclick="lbLocalPlaces_Click"> <asp:Image ID="imLocalPlaces" runat="server" ImageUrl="~/Images/Andy_Houses_on_the_horizon_-_Starburst_remix.png" Height="30" /> <span class="name">Local Places.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbWhereIveBeen" runat="server" onclick="lbWhereIveBeen_Click"> <asp:Image ID="imImHere" runat="server" ImageUrl="~/Images/ryanlerch_flagpole.png" Height="30" /> <span class="name">I've been here.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbMyStats" runat="server"> <asp:Image ID="imMyStats" runat="server" ImageUrl="~/Images/Anonymous_Spreadsheet.png" Height="30" /> <span class="name">My Stats.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbAddAPlace" runat="server" onclick="lbAddAPlace_Click"> <asp:Image ID="imAddAPlace" runat="server" ImageUrl="~/Images/jean_victor_balin_add.png" Height="30" /> <span class="name">Add a Place.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="button"> <input type="button" value="Update Your Current Location" onclick="UpdateLocation_Click()"> </li> </ul> </div> </asp:Panel> <div> <asp:Panel ID="pnlCoupons" runat="server" Visible="false"> <div id="topbar"> <div id="title">MapSplore</div> <div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromDeals" OnClick="ReturnFromDeals_Click" /></div></div> <div class="content"> <asp:ListView ID="lvCoupons" runat="server"> <LayoutTemplate> <ul class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Place.Name") %>' OnClick="lbBusiness_Click"> <span class="comment"> <asp:Label ID="lblAddress" runat="server" Text='<%#Eval("Place.Address1") %>' /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Place.Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> </span> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView><asp:GridView ID="gvCoupons" runat="server" AutoGenerateColumns="false"> <HeaderStyle BackColor="Silver" /> <AlternatingRowStyle BackColor="Wheat" /> <Columns> <asp:TemplateField AccessibleHeaderText="Business" HeaderText="Business"> <ItemTemplate> <asp:Image ID="imPlaceType" runat="server" Text='<%#Eval("Type") %>' ImageUrl='<%#Eval("Image") %>' /> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Name") %>' OnClick="lbBusiness_Click" /> <asp:LinkButton ID="lblAddress" runat="server" Text='<%#Eval("Address1") %>' CssClass="smallText" /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> <asp:Label ID="lblInfo" runat="server" Visible="false" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </div> </asp:Panel> <asp:Panel ID="pnlPlaces" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromPlaces" OnClick="ReturnFromPlaces_Click" /></div></div> <div id="content"> <asp:ListView ID="lvPlaces" runat="server"> <LayoutTemplate> <ul id="ulPlaces" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> <li class="menu"> <asp:LinkButton ID="lbNotListed" runat="server" CssClass="name" OnClick="lbNotListed_Click"> Place not listed <span class="arrow"></span> </asp:LinkButton> </li> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbImHere" runat="server" CssClass="name" OnClick="lbImHere_Click"> <%#DisplayName(Eval("Name")) %>  <%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView> </div> </asp:Panel> <asp:Panel ID="pnlImHereNow" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Places" ID="lbImHereNowReturn" OnClick="lbImHereNowReturn_Click" /></div></div> <div id="rightbutton"> <asp:LinkButton runat="server" Text="Beginning" ID="lbBackToBeginning" OnClick="lbBackToBeginning_Click" /> </div> <div id="content"> <ul class="pageitem"> <asp:HiddenField ID="hdPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceLat" runat="server" /> <asp:HiddenField ID="hdPlaceLon" runat="server" /> <asp:HiddenField ID="hdPlaceTitle" runat="server" /> <asp:Button ID="btnImHereNow" runat="server" Text="I'm here" OnClick="btnImHereNow_Click" /> <asp:Label ID="lblPlaceTitle" runat="server" /><br /> <asp:TextBox ID="txtWhatsHappening" runat="server" TextMode="MultiLine" Rows="2" style="width:300px" /><br /> <div id="divImHere" style="width:300px; height:300px"></div> </div> </ul> </asp:Panel> <asp:Panel runat="server" ID="pnlIveBeenHere" Visible="false"> <div id="topbar"> <div id="title"> Where I've been</div><div id="leftbutton"> <asp:LinkButton ID="lbIveBeenHereBack" runat="server" Text="Back" OnClick="lbIveBeenHereBack_Click" /></div></div> <div id="content"> <asp:ListView ID="lvWhereIveBeen" runat="server"> <LayoutTemplate> <ul id="ulWhereIveBeen" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu" runat="server"> <asp:LinkButton ID="lbPlaceIveBeen" runat="server" OnClick="lbPlaceIveBeen_Click" CssClass="name"> <asp:Label ID="lblPlace" runat="server" Text='<%#Eval("PlaceName") %>' /> at <asp:Label ID="lblTime" runat="server" Text='<%#Eval("ATTime") %>' CssClass="content" /> <asp:HiddenField ID="hdATID" runat="server" Value='<%#Eval("ATID") %>' /> <span class="arrow"></span> </asp:LinkButton> </li> </ItemTemplate> </asp:ListView> </div> </asp:Panel> <asp:Panel runat="server" ID="pnlPlaceIveBeen" Visible="false"> <div id="topbar"> <div id="title"> I've been here </div> <div id="leftbutton"> <asp:LinkButton ID="lbPlaceIveBeenBack" runat="server" Text="Back" OnClick="lbPlaceIveBeenBack_Click" /> </div> <div id="rightbutton"> <asp:LinkButton ID="lbPlaceIveBeenBeginning" runat="server" Text="Beginning" OnClick="lbPlaceIveBeenBeginning_Click" /> </div> </div> <div id="content"> <ul class="pageitem"> <li> <asp:HiddenField ID="hdPlaceIveBeenPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLatitude" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLongitude" runat="server" /> <asp:Label ID="lblPlaceIveBeenName" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenAddress" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCity" runat="server" />, <asp:Label ID="lblPlaceIveBeenState" runat="server" /> <asp:Label ID="lblPlaceIveBeenZipCode" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCountry" runat="server" /><br /> <div id="divPlaceIveBeen" style="width:300px; height:300px"></div> </li> </ul> </div> </asp:Panel> <asp:Panel ID="pnlAddPlace" runat="server" Visible="false"> <div id="topbar"><div id="title">MapSplore</div><div id="leftbutton"><asp:LinkButton ID="lbAddPlaceReturn" runat="server" Text="Back" OnClick="lbAddPlaceReturn_Click" /></div><div id="rightnav"></div></div><div id="content"> <ul class="pageitem"> <li id="liPlaceAddMessage" runat="server" visible="false"> <asp:Label ID="PlaceAddMessage" runat="server" /> </li> <li class="bigfield"> <asp:TextBox ID="txtPlaceName" runat="server" placeholder="Name of Establishment" /> </li> <li class="bigfield"> <asp:TextBox ID="txtAddress1" runat="server" placeholder="Address 1" /> </li> <li class="bigfield"> <asp:TextBox ID="txtCity" runat="server" placeholder="City" /> </li> <li class="select"> <asp:DropDownList ID="ddlProvince" runat="server" placeholder="Select State" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtZipCode" runat="server" placeholder="Zip Code" /> </li> <li class="select"> <asp:DropDownList ID="ddlCountry" runat="server" onselectedindexchanged="ddlCountry_SelectedIndexChanged" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtPhoneNumber" runat="server" placeholder="Phone Number" /> </li> <li class="checkbox"> <span class="name">You Here Now:</span> <asp:CheckBox ID="cbYouHereNow" runat="server" Checked="true" /> </li> <li class="button"> <asp:Button ID="btnAdd" runat="server" Text="Add Place" onclick="btnAdd_Click" /> </li> </ul></div> </asp:Panel> <asp:Panel ID="pnlImHere" runat="server" Visible="false"> <asp:TextBox ID="txtImHere" runat="server" TextMode="MultiLine" Rows="3" Columns="40" /><br /> <asp:DropDownList ID="ddlPlace" runat="server" /><br /> <asp:Button ID="btnHere" runat="server" Text="Tell Everyone I'm Here" onclick="btnHere_Click" /><br /> </asp:Panel> </div> </ContentTemplate> </asp:UpdatePanel> </asp:Content> Code Behind .cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using LocationDataModel; public partial class AT_iPhone_Default : ViewStatePage{ private iPhoneDevice ipd; protected void Page_Load(object sender, EventArgs e) { LocationDataEntities lde = new LocationDataEntities(); if (!Page.IsPostBack) { var Countries = from c in lde.Countries select c; foreach (Country co in Countries) { ddlCountry.Items.Add(new ListItem(co.Name, co.CountryId.ToString())); } ddlCountry_SelectedIndexChanged(ddlCountry, null); if (AppleIPhone.IsIPad()) ipd = iPhoneDevice.iPad; if (AppleIPhone.IsIPhone()) ipd = iPhoneDevice.iPhone; if (AppleIPhone.IsIPodTouch()) ipd = iPhoneDevice.iPodTouch; } } protected void btnPlaces_Click(object sender, EventArgs e) { } protected void btnAdd_Click(object sender, EventArgs e) { bool blImHere = cbYouHereNow.Checked; string Place = txtPlaceName.Text, Address1 = txtAddress1.Text, City = txtCity.Text, ZipCode = txtZipCode.Text, PhoneNumber = txtPhoneNumber.Text, ProvinceId = ddlProvince.SelectedItem.Value, CountryId = ddlCountry.SelectedItem.Value; int iProvinceId, iCountryId; double dLatitude, dLongitude; DataAccess da = new DataAccess(); if ((!String.IsNullOrEmpty(ProvinceId)) && (!String.IsNullOrEmpty(CountryId))) { iProvinceId = Convert.ToInt32(ProvinceId); iCountryId = Convert.ToInt32(CountryId); if (blImHere) { dLatitude = Convert.ToDouble(Latitude.Value); dLongitude = Convert.ToDouble(Longitude.Value); da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber, dLatitude, dLongitude); } else { da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber); } liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Awesome, your place has been added. Add Another!"; txtPlaceName.Text = String.Empty; txtAddress1.Text = String.Empty; txtCity.Text = String.Empty; ddlProvince.SelectedIndex = -1; txtZipCode.Text = String.Empty; txtPhoneNumber.Text = String.Empty; } else { liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Please select a State and a Country."; } } protected void ddlCountry_SelectedIndexChanged(object sender, EventArgs e) { string CountryId = ddlCountry.SelectedItem.Value; if (!String.IsNullOrEmpty(CountryId)) { int iCountryId = Convert.ToInt32(CountryId); LocationDataModel.LocationDataEntities lde = new LocationDataModel.LocationDataEntities(); var prov = from p in lde.Provinces where p.CountryId == iCountryId orderby p.ProvinceName select p; ddlProvince.Items.Add(String.Empty); foreach (Province pr in prov) { ddlProvince.Items.Add(new ListItem(pr.ProvinceName, pr.ProvinceId.ToString())); } } else { ddlProvince.Items.Clear(); } } protected void btnImHere_Click(object sender, EventArgs e) { int i = 0; DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value), Lon = Convert.ToDouble(Longitude.Value); List<Place> lp = da.NearByLocations(Lat, Lon); foreach (Place p in lp) { ListItem li = new ListItem(p.Name, p.PlaceId.ToString()); if (i == 0) { li.Selected = true; } ddlPlace.Items.Add(li); i++; } pnlAddPlace.Visible = false; pnlImHere.Visible = true; } protected void lbImHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; ListViewItem lvi = (ListViewItem)(((LinkButton)sender).Parent); HiddenField hd = (HiddenField)lvi.FindControl("hdPlaceId"); long PlaceId = Convert.ToInt64(hd.Value); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); Place pl = da.GetPlace(PlaceId); pnlImHereNow.Visible = true; pnlPlaces.Visible = false; hdPlaceId.Value = PlaceId.ToString(); hdPlaceLat.Value = pl.Latitude.ToString(); hdPlaceLon.Value = pl.Longitude.ToString(); hdPlaceTitle.Value = pl.Name; lblPlaceTitle.Text = pl.Name; } protected void btnHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; string WhatsH = txtImHere.Text; long PlaceId = Convert.ToInt64(ddlPlace.SelectedValue); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsH, dLatitude, dLongitude); } protected void btnLocalCoupons_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); } protected void lbBusiness_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; GridViewRow gvr = (GridViewRow)(((LinkButton)sender).Parent.Parent); HiddenField hd = (HiddenField)gvr.FindControl("hdPlaceId"); string sPlaceId = hd.Value; Int64 PlaceId; if (!String.IsNullOrEmpty(sPlaceId)) { PlaceId = Convert.ToInt64(sPlaceId); } } protected void lbLocalDeals_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); pnlCoupons.Visible = true; pnlStart.Visible = false; List<GeoPromotion> lgp = da.NearByDeals(dLatitude, dLongitude); lvCoupons.DataSource = lgp; lvCoupons.DataBind(); } protected void lbLocalPlaces_Click(object sender, EventArgs e) { DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value); double Lon = Convert.ToDouble(Longitude.Value); List<LocationDataModel.Place> places = da.NearByLocations(Lat, Lon); lvPlaces.DataSource = places; lvPlaces.SelectedIndex = -1; lvPlaces.DataBind(); pnlPlaces.Visible = true; pnlStart.Visible = false; } protected void ReturnFromPlaces_Click(object sender, EventArgs e) { pnlPlaces.Visible = false; pnlStart.Visible = true; } protected void ReturnFromDeals_Click(object sender, EventArgs e) { pnlCoupons.Visible = false; pnlStart.Visible = true; } protected void btnImHereNow_Click(object sender, EventArgs e) { long PlaceId = Convert.ToInt32(hdPlaceId.Value); string UserName = Membership.GetUser().UserName; string WhatsHappening = txtWhatsHappening.Text; double UserLat = Convert.ToDouble(Latitude.Value); double UserLon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsHappening, UserLat, UserLon); } protected void lbImHereNowReturn_Click(object sender, EventArgs e) { pnlImHereNow.Visible = false; pnlPlaces.Visible = true; } protected void lbBackToBeginning_Click(object sender, EventArgs e) { pnlStart.Visible = true; pnlImHereNow.Visible = false; } protected void lbWhereIveBeen_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; pnlStart.Visible = false; pnlIveBeenHere.Visible = true; DataAccess da = new DataAccess(); lvWhereIveBeen.DataSource = da.UserATs(UserName, 0, 15); lvWhereIveBeen.DataBind(); } protected void lbIveBeenHereBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = false; pnlStart.Visible = true; } protected void lbPlaceIveBeen_Click(object sender, EventArgs e) { LinkButton lb = (LinkButton)sender; ListViewItem lvi = (ListViewItem)lb.Parent.Parent; HiddenField hdATID = (HiddenField)lvi.FindControl("hdATID"); Int64 ATID = Convert.ToInt64(hdATID.Value); DataAccess da = new DataAccess(); pnlIveBeenHere.Visible = false; pnlPlaceIveBeen.Visible = true; var plac = da.GetPlaceViaATID(ATID); hdPlaceIveBeenPlaceId.Value = plac.PlaceId.ToString(); hdPlaceIveBeenLatitude.Value = plac.Latitude.ToString(); hdPlaceIveBeenLongitude.Value = plac.Longitude.ToString(); lblPlaceIveBeenName.Text = plac.Name; lblPlaceIveBeenAddress.Text = plac.Address1; lblPlaceIveBeenCity.Text = plac.City; lblPlaceIveBeenState.Text = plac.Province.ProvinceName; lblPlaceIveBeenZipCode.Text = plac.ZipCode; lblPlaceIveBeenCountry.Text = plac.Country.Name; } protected void lbNotListed_Click(object sender, EventArgs e) { SetupAddPoint(); pnlPlaces.Visible = false; } protected void lbAddAPlace_Click(object sender, EventArgs e) { SetupAddPoint(); } private void SetupAddPoint() { double lat = Convert.ToDouble(Latitude.Value); double lon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); var zip = da.WhereAmIAt(lat, lon); if (zip.Count > 0) { var z0 = zip[0]; txtCity.Text = z0.City; txtZipCode.Text = z0.ZipCode; ddlProvince.ClearSelection(); if (z0.ProvinceId.HasValue == true) { foreach (ListItem li in ddlProvince.Items) { if (li.Value == z0.ProvinceId.Value.ToString()) { li.Selected = true; break; } } } } pnlAddPlace.Visible = true; pnlStart.Visible = false; } protected void lbAddPlaceReturn_Click(object sender, EventArgs e) { pnlAddPlace.Visible = false; pnlStart.Visible = true; liPlaceAddMessage.Visible = false; PlaceAddMessage.Text = String.Empty; } protected void lbPlaceIveBeenBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = true; pnlPlaceIveBeen.Visible = false; } protected void lbPlaceIveBeenBeginning_Click(object sender, EventArgs e) { pnlPlaceIveBeen.Visible = false; pnlStart.Visible = true; } protected string DisplayName(object val) { string strVal = Convert.ToString(val); if (AppleIPhone.IsIPad()) { ipd = iPhoneDevice.iPad; } if (AppleIPhone.IsIPhone()) { ipd = iPhoneDevice.iPhone; } if (AppleIPhone.IsIPodTouch()) { ipd = iPhoneDevice.iPodTouch; } return (iPhoneHelper.DisplayContentOnMenu(strVal, ipd)); }} iPhoneHelper.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; public enum iPhoneDevice{ iPhone, iPodTouch, iPad}/// <summary>/// Summary description for iPhoneHelper/// </summary>/// public class iPhoneHelper{ public iPhoneHelper() { // // TODO: Add constructor logic here // } // This code is stupid in retrospect. Use css to solve this problem public static string DisplayContentOnMenu(string val, iPhoneDevice ipd) { string Return = val; string Elipsis = "..."; int iPadMaxLength = 30; int iPhoneMaxLength = 15; if (ipd == iPhoneDevice.iPad) { if (Return.Length > iPadMaxLength) { Return = Return.Substring(0, iPadMaxLength - Elipsis.Length) + Elipsis; } } else { if (Return.Length > iPhoneMaxLength) { Return = Return.Substring(0, iPhoneMaxLength - Elipsis.Length) + Elipsis; } } return (Return); }} Source code for the ViewStatePage: using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls; /// <summary>/// Summary description for BasePage/// </summary>#region Base class for a page.public class ViewStatePage : System.Web.UI.Page{ PageStatePersisterToDatabase myPageStatePersister; public ViewStatePage() : base() { myPageStatePersister = new PageStatePersisterToDatabase(this); } protected override PageStatePersister PageStatePersister { get { return myPageStatePersister; } } }#endregion #region This class will override the page persistence to store page state in a database.public class PageStatePersisterToDatabase : PageStatePersister{ private string ViewStateKeyField = "__VIEWSTATE_KEY"; private string _exNoConnectionStringFound = "No Database Configuration information is in the web.config."; public PageStatePersisterToDatabase(Page page) : base(page) { } public override void Load() { // Get the cache key from the web form data System.Int64 key = Convert.ToInt64(Page.Request.Params[ViewStateKeyField]); Pair state = this.LoadState(key); // Abort if cache object is not of type Pair if (state == null) throw new ApplicationException("Missing valid " + ViewStateKeyField); // Set view state and control state ViewState = state.First; ControlState = state.Second; } public override void Save() { // No processing needed if no states available if (ViewState == null && ControlState != null) return; System.Int64 key; IStateFormatter formatter = this.StateFormatter; Pair statePair = new Pair(ViewState, ControlState); // Serialize the statePair object to a string. string serializedState = formatter.Serialize(statePair); // Save the ViewState and get a unique identifier back. key = SaveState(serializedState); // Register hidden field to store cache key in // Page.ClientScript does not work properly with Atlas. //Page.ClientScript.RegisterHiddenField(ViewStateKeyField, key.ToString()); ScriptManager.RegisterHiddenField(this.Page, ViewStateKeyField, key.ToString()); } private System.Int64 SaveState(string PageState) { System.Int64 i64Key = 0; string strConn = String.Empty, strProvider = String.Empty; string strSql = "insert into tblPageState ( SerializedState ) values ( '" + SqlEscape(PageState) + "');select scope_identity();"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); i64Key = Convert.ToInt64(sqlCm.ExecuteScalar()); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return i64Key; } private Pair LoadState(System.Int64 iKey) { string strConn = String.Empty, strProvider = String.Empty, SerializedState = String.Empty, strMinutesInPast = GetMinutesInPastToDelete(); Pair PageState; string strSql = "select SerializedState from tblPageState where tblPageStateID=" + iKey.ToString() + ";" + "delete from tblPageState where DateUpdated<DateAdd(mi, " + strMinutesInPast + ", getdate());"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); SerializedState = Convert.ToString(sqlCm.ExecuteScalar()); IStateFormatter formatter = this.StateFormatter; if ((null == SerializedState) || (String.Empty == SerializedState)) { throw (new ApplicationException("No ViewState records were returned.")); } // Deserilize returns the Pair object that is serialized in // the Save method. PageState = (Pair)formatter.Deserialize(SerializedState); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return PageState; } private string SqlEscape(string Val) { string ReturnVal = String.Empty; if (null != Val) { ReturnVal = Val.Replace("'", "''"); } return (ReturnVal); } private void GetDBConnectionString(ref string ConnectionStringValue, ref string ProviderNameValue) { if (System.Configuration.ConfigurationManager.ConnectionStrings.Count > 0) { ConnectionStringValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString; ProviderNameValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ProviderName; } else { throw new ConfigurationErrorsException(_exNoConnectionStringFound); } } private string GetMinutesInPastToDelete() { string strReturn = "-60"; if (null != System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"]) { strReturn = System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"].ToString(); } return (strReturn); }}#endregion AppleiPhone.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; /// <summary>/// Summary description for AppleIPhone/// </summary>public class AppleIPhone{ public AppleIPhone() { // // TODO: Add constructor logic here // } static public bool IsIPhoneOS() { return (IsIPad() || IsIPhone() || IsIPodTouch()); } static public bool IsIPhone() { return IsTest("iPhone"); } static public bool IsIPodTouch() { return IsTest("iPod"); } static public bool IsIPad() { return IsTest("iPad"); } static private bool IsTest(string Agent) { bool bl = false; string ua = HttpContext.Current.Request.UserAgent.ToLower(); try { bl = ua.Contains(Agent.ToLower()); } catch { } return (bl); }} Master page .cs: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls; public partial class MasterPages_iPhoneMaster : System.Web.UI.MasterPage{ protected void Page_Load(object sender, EventArgs e) { HtmlHead head = Page.Header; HtmlMeta meta = new HtmlMeta(); if (AppleIPhone.IsIPad() == true) { meta.Content = "width=400,user-scalable=no"; head.Controls.Add(meta); } else { meta.Content = "width=device-width, user-scalable=no"; meta.Attributes.Add("name", "viewport"); } meta.Attributes.Add("name", "viewport"); head.Controls.Add(meta); HtmlLink cssLink = new HtmlLink(); HtmlGenericControl script = new HtmlGenericControl("script"); script.Attributes.Add("type", "text/javascript"); script.Attributes.Add("src", ResolveUrl("~/Scripts/iWebKit/javascript/functions.js")); head.Controls.Add(script); cssLink.Attributes.Add("rel", "stylesheet"); cssLink.Attributes.Add("href", ResolveUrl("~/Scripts/iWebKit/css/style.css") ); cssLink.Attributes.Add("type", "text/css"); head.Controls.Add(cssLink); HtmlGenericControl jsLink = new HtmlGenericControl("script"); //jsLink.Attributes.Add("type", "text/javascript"); //jsLink.Attributes.Add("src", ResolveUrl("~/Scripts/jquery-1.4.1.min.js") ); //head.Controls.Add(jsLink); HtmlLink appleIcon = new HtmlLink(); appleIcon.Attributes.Add("rel", "apple-touch-icon"); appleIcon.Attributes.Add("href", ResolveUrl("~/apple-touch-icon.png")); HtmlMeta appleMobileWebAppStatusBarStyle = new HtmlMeta(); appleMobileWebAppStatusBarStyle.Attributes.Add("name", "apple-mobile-web-app-status-bar-style"); appleMobileWebAppStatusBarStyle.Attributes.Add("content", "black"); head.Controls.Add(appleMobileWebAppStatusBarStyle); } internal string FindPath(string Location) { string Url = Server.MapPath(Location); return (Url); }}

Read the article

CodePlex Daily Summary for Thursday, February 25, 2010

CodePlex Daily Summary for Thursday, February 25, 2010New ProjectsAptusSoftware.Threading: AptusSoftware.Threading is a class library designed primarily to assist in the development of multi-threaded WinForm applications, although there i...AxiomGameDesigner: It is going to be a universal scene editor for Axiom 3D game engine. It is in pure C# and will be kept portable to MONO for compatibility with linu...Badger - Unity Productivity Extensions: A set of Microsoft Unity Extensions. Why Badger? Because I love badgers.Business & System Analysis Templates and Best Practices for Russian: http://saway.codeplex.com/Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in...FastCode: .NET 3.5 Extensions set to increase coding speed.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cro...Icelandic Online Banking: Icelandic Online Banking is project defining a web service interface for online banking.IE8 AddOns XML Creator: Application that helps on creating the xml files for IE8 Accelerators, Search Providers and the markup for Web Slices.iKnowledge: a asp.net mvc demoLearn ASP.NET MVC: Learn ASP.NET MVC is a project for the members of the Peer Learning group in Silicon Valley. It contains the SportsStore solution from the Pro ASP...Live at Education Meta Web-Service: Live at Education Meta Web-Service is intended to abstract from several technologies that are included in Live@edu set of services. This web-ser...Low level wave sound output for VB.NET: Low level sound output class for VB.NET using platform invocation services to call winmm.dllMailQ: MailQ makes it easier for developers to send mail messages from an application. The system sends mails based on a database queue system (store, se...Managed DXGI: Managed DXGI library is Fully managed wrapper writen on C# for DXGI 1.0 and 1.1 technology. It makes easier to support DXGI in managed application....Multivalue AutoComplete WinForms TextBox in C#: This project is a sample application that demonstrates how to create a multivalue WinForms textbox in C# using .NET Framework 3.5.Nifty CSharp Tools: Nifty CSharp Tools, will contain various tools and snippets. IRCBot, splashscreens, linq, world of warcraft log parsing, screenshot uploaders, twi...PHP MPQ: A port of StormLib to PHP for handling Blizzard MPQ files.RedDevils strategy - Project Hoshimi Programming Battle: Source Code of RedDevils strategy. Imagine Cup 2008 - Project Hoshimi Programming Battle.RNUNIT: rNunit is a distributed Nunit project. Many application these days are client-server application, distributed application and regular unit testing ...Samar Solution: Samar Solutions is a business system for office automation.Silverlight OOMRPG Game Engine: Silverlight OOMRPG Game EngineSimulator: GPSSimulatorSLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit is a flexible Augmented Reality library for Silverlight with the aim to make real time Augmented Reality applications with Silverlight ...Spiral Architecture Driven Development (SADD) for Russian: Это русская версия сайта sadd.codeplex.comSQLSnapshotManager: Easily manage SQL Server database snapshots in a easy to use visual interface.Twilio with VB.NET MVC: Twilio with VB.NET MVC is a sample application for developing with Twilio's REST based telephony API. It includes an XML Schema of the TwiML respon...Ultra Speed Dial: UltraSpeedDial.com - Online Speed Dial Page.Visual HTML Editor justHTML: justHTML - is simle windows-application WYSIWYG editor that allow everyone - without any knowledge of HTML - to create and edit web-pages. It supp...WinMTR.NET: .NET Clone of the popular Windows clone of the popular Linux Matt's TracerouteWPF Dialogs: "WPF Dialogs" is a library for different Dialogs in WPF (e.g. FolderBrowseDialog, SaveFileDialog, OpenFileDialog etc.). These Dialogs are written i...WPFLogin: A small Login window in WPF and C#XNA PerformanceTimers: CPU Timers for Windows and Xbox360. Can track multiple threads, and presents output as a log on-screen.New ReleasesAptusSoftware.Threading: 2.0.0: First public release. This release is in production as part of several commercial applications and is stable. The source code download includes a...BizTalk Software Factory: BizTalk Software Factory v2.1: This is a service release for the BizTalk Software Factory for BizTalk Server 2009, containing so far: Fix for x64: the SN.EXE tool is now locate...Business & System Analysis Templates and Best Practices for Russian: R00 The Place reserver: Just to reserve the place Will be filled out soonChronos WPF: Chronos v1.0 Beta 2: Added a new SplashScreen Added a new Login View and implemented Log Off Added a new PasswordBoxHelper (http://www.codeproject.com/Articles/371...dotNetTips: dotNetTips.Utility 3.5 R2: This is a new release (version 3.5.0.3) compatible with .NET 3.5. Lots of new classes/features!! Requires SP1 if using the Entity Framework extensi...fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 beta 3: The third and final beta of fleXdoc. fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclien...FluentPS: FluentPS v1.0: - FluentPS is moved from ASMX to WCF interface of the Project Server Interface (PSI) - Impersonation changes to work in compliance with WCF interfa...FolderSize: FolderSize.Win32.1.0.4.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...iTuner - The iTunes Companion: iTuner 1.1.3707 Beta 3: As promised, the iTuner Automated Librarian is now available. This automatically cleans an entire album of dead tracks and duplicates as tracks ar...Live at Education Meta Web-Service: LAEMWS v 1.0 beta: Release Candidate for LAEMWS.Macaw Reusable Code Library: LanguageConfigurationSolution: This Solution helps developing a multi language publishing web siteManaged DXGI: Initial Release.: Base declaration of interfaces, most of them untested yet.Math.NET Numerics: 2010.2.24.667 Build: Latest alpha buildMiniTwitter: 1.08.1: MiniTwitter 1.08.1 更新内容変更インクリメンタル検索時には大文字小文字の区別をしないように変更クライアント名の表示を本家にあわせて from から via に変更修正公式 RT 時にステータスが上に表示されたり二重に表示されるバグを修正自分が自分へ返信...Multivalue AutoComplete WinForms TextBox in C#: 1.0 First public release: Multivalue autocomplete textbox control and host application in this release are released in a single Visual Studio 2008 projects. See my related b...NMock3: NMock3 - Beta3, .NET 3.5: This release has some exciting new features. Please start providing feedback on the tutorials. The first several are complete and the rest are no...nxAjax - an asp.net ajax library using jQuery: nxAjax v3 codeplex 7: nxAjax v3 codeplex 7 binary and test website. Bug Fixed: ajax:Form control Add: Drag and drop Rewritten: DragnDropManager DragPanel DropPan...Office Apps: 0.8.7: whats new? Document.Editor and Document.Viewer now supports FlowDocument (.xaml) files bug fix'sPDF Rider: PDF Rider 0.3: Application PrerequisitesMicrosoft Windows Operating Systems (XP (tested) - Vista - 7) Microsoft .NET Framework 3.5 runtime A PDF rendering sof...ShellLight: ShellLight 0.1.0.1 Src: Codeplex project released. This is only a preview of the product. Until the first final release there will be many improvements.Silverlight OOMRPG Game Engine: SilverlightGameTutorialSolution v1.01: Please visit my blog for Silverlight OOMROG Game Tutorial: http://www.cnblogs.com/Jax/archive/2010/02/24/1673053.html.Simple Savant: Simple Savant v0.4: Added support for full-text indexing (See Full-Text Indexing) Added support for attribute spanning and compression for property values larger tha...Spiral Architecture Driven Development (SADD) for Russian: R00: R00 to reserve site nameTeamReview - TFS Code Review: Release 1.1.3: Release Features New expanded product positioning for capturing any targeted coding work as a trackable, assignable, reportable Work Item for any r...Text Designer Outline Text Library: 10th minor release: Version 0.3.1 (10th minor release)Fixed the gradient brush being too big for the text, resulting in not much gradient shown in the text. Gradient...TFS Workflow Control: TeamExplorer and TSWA control 1.0 for TFS 2010 RC: This is a special version for TFS 2010 RC. Use the RC version of the power tools to modify the layout of your work items (http://visualstudiogaller...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.7) - VS2010 RC Support: This update adds support for Visual Studio 2010 RC in addition to Visual Studio 2008. Please note that Visual Studio 2010 Beta 2 is NOT supported a...Tumblen3: tumblen3 Version 25Feb2010: ready for Twitter's xAuthUMD文本编辑器: UMDEditor文本编辑器V2.1.0: 2.1.0 (2010-02-24) 增加查找章节内指定文本内容的功能 2.0.4 (2010-02-06) 章节内容框增加右键菜单，包含编辑文本的基本操作 ------------------------------------------------------- 执行 reg.bat ...VCC: Latest build, v2.1.30224.0: Automatic drop of latest buildVisual HTML Editor justHTML: Latest binary: Latest buid here. Executable and mshtml.dll included in this archive. Ready to use ;)Visual HTML Editor justHTML: Source code for version 2.5: Visual studio 2008 project with full source code.VOB2MKV: vob2mkv-1.0.2: The release vob2mkv-1.0.2 is a feature update of the VOB2MKV project. It now includes a DirectShow source filter, MKVSOURCE. A source filter allo...WinMTR.NET: V 1.0: V 1.0WPF Dialogs: Version 0.1.0: Version 0.1.0 FolderBrowseDialog is implementet for more information look here Version 0.1.0 (german: Version 0.1.0 - Deutsch).WPF Dialogs: Version 0.1.1: Version 0.1.1 Features FolderBrowseDialog was extended / FolderBrowseDialog - Deutsch wurde erweitertXNA PerformanceTimers: XNA PerformanceTimers 0.1: Initial release.Zeta Resource Editor: Release 2010-02-24: Added HTTP proxy server support.Most Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesOxiteMost Active ProjectsDinnerNow.netBlogEngine.NETRawrInfoServiceSLARToolkit - Silverlight Augmented Reality ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web ServicesRapid Entity Framework. (ORM). CTP 2Common Context Adapters

Read the article

Mauritius Software Craftsmanship Community

There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

Read the article

Bug Triage

In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

Read the article

Issue 15: Oracle PartnerNetwork Exchange @ Oracle OpenWorld

- by rituchhibber

ORACLE FOCUS Oracle PartnerNetwork Exchange@ ORACLE OpenWorld Sylvie MichouSenior DirectorPartner Marketing & Communications and Strategic Programs RESOURCES -- Oracle OpenWorld 2012 Oracle PartnerNetwork Exchange @ OpenWorld Oracle PartnerNetwork Exchange @ OpenWorld Registration Oracle PartnerNetwork Exchange SpecializationTest Fest Oracle OpenWorld Schedule Builder Oracle OpenWorld Promotional Toolkit for Partners Oracle Partner Events Oracle Partner Webcasts Oracle EMEA Partner News SUBSCRIBE FEEDBACK PREVIOUS ISSUES If you are attending our forthcoming Oracle OpenWorld 2012 conference in San Francisco from 30 September to 4 October, you will discover a new dedicated programme of keynotes and sessions tailored especially for you, our valued partners. Oracle PartnerNetwork Exchange @ OpenWorld has been created to enhance the opportunities for you to learn from and network with Oracle executives and experts. The programme also provides more informal opportunities than ever throughout the week to meet up with the people who are most important to your business: customers, prospects, colleagues and the Oracle EMEA Alliances & Channels management team. Oracle remains fully focused on building the industry's most admired partner ecosystem—which today spans over 25,000 partners. This new OPN Exchange programme offers an exciting change of pace for partners throughout the conference. Now it will be possible to enjoy a fully-integrated, partner-dedicated session schedule throughout the week, as well as key social events such as the Sunday night Welcome Reception, networking lunches from Monday to Thursday at the Howard Street Tent, and a fantastic closing event on the last Thursday afternoon. In addition to the regular Oracle OpenWorld conference schedule, if you have registered for the Oracle PartnerNetwork Exchange @ OpenWorld programme, you will be invited to attend a much anticipated global partner keynote presentation, plus more than 40 conference sessions aimed squarely at what's most important to you, as partners. Prominent topics for discussion will include: Oracle technologies and roadmaps and how they fit with partners' business plans; business development; regional distinctions in business practices; and much more. Each session will provide plenty of food for thought ahead of the numerous networking opportunities throughout the week, encouraging the knowledge exchange with Oracle executives, customers, prospects, and colleagues that will make this conference of even greater value for you. At Oracle we always work closely with our partners to deliver solution offerings that improve business value, simplify the IT experience and drive innovation and efficiencies for joint customers. The most important element of our new OPN Exchange is content that helps you get more from technology investments, more from your peer-to-peer connections, and more from your interactions with customers. To this end we've created some partner-specific tools which can be used by OPN members ahead of the conference itself. Crucially, a comprehensive Content Catalog already lists and organises details of every OPN Exchange session, speaker, exhibitor, demonstration and related materials. This Content Catalog can be used by all our partners to identify interesting content that you can add to your own personalised Oracle OpenWorld Schedule Builder, allowing more effective planning and pre-enrolment for vital sessions. There are numerous highlights that you will definitely want to include in those personal schedules. On Sunday morning, 30 September we will start the week with partner dedicated OPN Exchange sessions, following our Global Partner Keynote at 13:00 with Judson Althoff, SVP, Worldwide Alliances & Channels and Embedded Sales and senior executives, giving insight into Oracle's partner vision, strategy, and resources—all designed to help build and strengthen market opportunities for you. This will be followed by a number of OPN Exchange general sessions, the Oracle OpenWorld Opening Keynote with Larry Ellison, CEO, Oracle and concluded with the OPN Exchange AfterDark Welcome Reception, starting at 19:30 at the Metreon. From Monday 1 to Thursday 4 October, you can attend the OPN Exchange sessions that are most relevant to your business today and over the coming year. Oracle's top product and sales leaders will be on hand to discuss Oracle's strategic direction in 40+ targeted and in-depth sessions focussing on critical success factors to develop your business. Oracle's dedication to innovation, specialization, enablement and engineering provides Oracle partners with a huge opportunity to create new services and solutions, differentiate themselves and deliver extreme value to joint customers across the globe. Oracle will even be helping over 1000 partners to earn OPN Specialization certification during the Oracle OpenWorld OPN Exchange Test Fest, which will be providing all the study materials and exams required to drive Specialization for free at the conference. You simply need to check the list of current certification tracks available, and make sure you pre-register to reserve a seat in one of the ten sessions being offered free to OPN Exchange registered attendees. And finally, let's not forget those all-important networking opportunities, which can so often provide partners with valuable long-term alliances as well as exciting new business leads. The Oracle PartnerNetwork Lounge, located at Moscone South, exhibition hall, room 100 is the place where partners can meet formally or informally with colleagues, customers, prospects, and other industry professionals. OPN Specialized partners with OPN Exchange passes can also visit the OPN Video Blogging room to record and share ideas, and at the OPN Information Station you will find consultants available to answer your questions. "For the first time ever we will have a full partner conference within OpenWorld. OPN Exchange @ OpenWorld will kick-off on the first Sunday and run the entire week. We'll have over 40 sessions throughout that time and partners will hear from our top development executives, with special sessions dedicated to partnering throughout. It's going to be a phenomenal event, and we look forward to seeing our partners there." Judson Althoff, SVP, Oracle Worldwide Alliances & Channels and Embedded Sales So if you haven't done so already, please register for Oracle PartnerNetwork Exchange @ OpenWorld today or add OPN Exchange to your existing registration for just $100 through My Account. And if you have any further questions regarding partner activities at Oracle OpenWorld, please don't hesitate to contact the Oracle PartnerNetwork team at [email protected] will be on hand to share the very latest information about: Oracle's SPARC Superclusters: the latest Engineered Systems from Oracle, delivering radically improved performance, faster deployment and greatly reduced operational costs for mixed database and enterprise application consolidation Oracle's SPARC T4 servers: with the newly developed T4 processor and Oracle Solaris providing up to five times the single threaded performance and better overall system throughput for expanded application versatility Oracle Database Appliance: a new way to take advantage of the world's most popular database, Oracle Database 11g, in a single, easy-to-deploy and manage system. It's a complete package engineered to deliver simple, reliable and affordable database services to small and medium size businesses and departmental systems. All hardware and software components are supported together and offer customers unique pay-as-you-grow software licensing to quickly scale from two to 24 processor cores without incurring the costs and downtime usually associated with hardware upgrades Oracle Exalogic: the world's only integrated cloud machine, featuring server hardware and middleware software engineered together for maximum performance with minimum set-up and operational cost Oracle Exadata Database Machine: the only database machine that provides extreme performance for both data warehousing and online transaction processing (OLTP) applications, making it the ideal platform for consolidating onto grids or private clouds. It is a complete package of servers, storage, networking and software that is massively scalable, secure and redundant Oracle Sun ZFS Storage Appliances: providing enterprise-class NAS performance, price-performance, manageability and TCO by combining third-generation software with high-performance controllers, flash-based caches and disks Oracle Pillar Axiom Quality-of-Service: confidently consolidate storage for multiple applications into a single datacentre storage solution Oracle Solaris 11: delivering secure enterprise cloud deployments with the ability to run hundreds of virtual application with no overhead and co-engineered with other Oracle software products to provide the highest levels of security, manageability and performance Oracle Enterprise Manager 12c: Oracle's integrated enterprise IT management product, providing the industry's only complete, integrated and business-driven enterprise cloud management solution Oracle VM 3.0: the latest release of Oracle's server virtualisation and management solution, helping to move datacentres beyond server consolidation to improve application deployment and management. Register today and ensure your place at the Extreme Performance Tour! Extreme Performance Tour events are free to attend, but places are limited. To make sure that you don't miss out, please visit Oracle's Extreme Performance Tour website, select the city that you'd be interest in attending an event in, and then click on the 'Register Now' button for that city to secure your interest. Each individual city page also contains more in-depth information about your local event, including logistics, agenda and maybe even a preview of VIP guest speakers. -- Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

Read the article

CodePlex Daily Summary for Friday, March 05, 2010

CodePlex Daily Summary for Friday, March 05, 2010New Projects.svn Folders Cleanup Tool: dotSVN Cleanup is a tool that allows you to remove the .svn folders . Just click, browse, say abracadabra ...and the magic is done. Have fun with...Accord: The Accord framework creates an easy we to integrate any Dependency Injection framework into your project, while abstracting the details of your im...Asp.net MVC Lab: Try asp.net mvc outASP.NET Themes management with Webforms: The provided source is an example for how to use themes in ASP.NET Webforms. this source is the "up to date" support for the article I wroteB&W Port Scanner: B&W Port Scanner (formerly Net Inspector) is a fast TCP Port scan utility. The main idea is support of customizable operations to be performed f...BizTalk SWAT - Simple Web Activity Tracker: This is a web based version of BizTalk HAT. The concept is designed to be able to share and enable sharing of orchestration info easily. Some of th...C# Linear Hash Table: A C# dictionary-like implementation of a linear hash table. It is more memory efficiant than the .NET dictionary, and also almost as fast. NOTE: On...DBF Import Export Wizard: DBF Import Export Wizard is a tool for anyone needing to import DBF files into SQL Server or to export SQL Server tables to a DBF file. This proje...Domain as XML - Driven Development: Visual Studio Code Samples: Domain as XML - Driven Development: Visual Studio Code SamplesEasyDownload: This application allows to manage downloads handling an stack of files and several useful configurationsEos2: .FlightTickets: This application allows to buy flight ticketsFotofly PhotoViewer: A Silverlight control that uses the Fotofly metadata library to show the people in a photo (using Windows Live Photo Gallery People metadata) and a...Fujiy source code: Source code examplesGameSet: This application allows to play games with distributed users.Injectivity (Dependency Injection): Injectivity is a dependency injection framework (written in C#) with a strong focus on the ease of configuration and performance. Having been writt...Inventory: Keep track of inputs, materias and salesLoanTin.Com Source Code: LoanTin.Com - a Social Networking Website as same as Tumblr.com, based on source code of Loantiner Project, allow anyone can share anything to anyo...mysln: my solutions.NumTextBox: TextBox控件重写之NumTextBox，主要实现的功能是，只允许输入数字，或String,Numeric,Currency,Decimal,Float,Double,Short,Int,Long 修改自：http://www.codeproject.com/KB/edit/num...Quick Performance Monitor: This small utility helps to monitor performance counters without using the full blown perfmon tool from Windows. It supports a number of command li...Runo: Runo ResearchSales: This application allows to manage a hardware storeScrewWiki Form Auth Provider: Enables your ASP.NET site to use Forms Authentication to integrate with your ScrewWiki. User management is performed on a parent site, and cookie i...SDS: Scientific DataSet library and tools: The SDS library makes it easy for .Net developers to read, write and share scalars, vectors, matrices and multidimensional grids which are very com...ShapeSweeper: Minesweeper-like game for the Zune HD. Each hidden object has three properties to discover--location, color, and shape--and all three must be corre...SilverlightExcel: an Excel file viewer in Silverlight 4: SilverlightExcel is a Silverlight application allowing you to open and view Excel files and also create graphs.sPWadmin: pwAdmin is an Web Interface based on JSP that uses the PW-Java API to control an PW-Server.Video Player control in Silverlight: A control for playing video in Silverlight 4 with chapters on timeline control. This player will be easily skinnable and customizable. More Featur...XNA Light Pre Pass Renderer: A demo/sample that shows how to write a light pre pass renderer in XNA.Zimms: Collaboration Site for friends, a code depot, and scratch padNew Releases.svn Folders Cleanup Tool: dotSVN Cleanup Tool: dotSVN Cleanup Tool executableAccord: Alpha: Initial build of the Accord framework.AcPrac: AcPrac Ver 0.1: The first version of AcPrac. It is not fully functional, but rather a version to get the bugs out. Please report all bugs.ASP.NET: ASP.NET Browser Definition Files: This download contains: ASP.NET 4 Browser Definition Files -- You can use the new ASP.NET 4 browser definition files with earlier versions of ASP....B&W Port Scanner: Black`n`White Port Scanner 1.0: B&W Port Scanner 1.0 Final Release Date: 03.03.2010 Black`n`WhiteBizTalk SWAT - Simple Web Activity Tracker: BizTalk SWAT: This is a web based version of BizTalk HAT. The concept is designed to be able to share and enable sharing of orchestration info easily. It uses th...BTP Tools: CSB+CUV+HCSB dict files 2010-03-04: 5. is now missing a space between the Strong’s number and the Count: >CSB Translation: 圣所 7, 至圣所G39+G394 it should be: CSB Translation: 圣所 7, 至圣所G...C# Linear Hash Table: Linear Hash Table: First working version of the Linear Hash Table.Cassiopeia: WinTools 1.0 beta: First ReleaseComposure: Caliburn-44007-trunk-vs2010.net40: This is a very simple conversion of the Caliburn trunk (rev 44007) for use in Visual Studio 2010 RC1 built against .NET40. Because the conversion w...Cover Creator: CoverCreator 1.3.0: English and Polish version. Functionality to add image to the front page. Load / save covers.DBF Import Export Wizard: DBF Import Export Wizard Source Code: Version 0.1.0.3DBF Import Export Wizard: DBF_Import_Export_Wizard Setup 0.1.0.3: Zip file contains Setup.exeESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions v0.2: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Fotofly PhotoViewer: Fotofly Photoview v0.1: The first public release. Based on a Silverlight application I have been using for over a year at www.tassography.com. This version uses Fotofly v0...HPC with GPUs applied to CG: Cuda Soft Bodies simulation: Cuda src for soft bodiesHPC with GPUs applied to CG: Full Soft Bodies src: full src code for soft bodies simulationInjectivity (Dependency Injection): 2.8.166.2135: Release 2.8.166.2135 of the Injectivity dependency injection framework.Line Counter: 1.5 (Code Outline Preview): This version contains preview of the code outline feature, you can now view C# code outline within Line Counter. Note that the code outline now onl...Micajah Mindtouch Deki Wiki Copier: MicajahWikiCopier: You should use the following line arguments: WikiCopier.exe "http://oldwikiwithdata.wik.is/@api/deki" "login" "password" "http://newwiki.somename.l...ncontrols: Alpha 0.4.0.1: Added some example on the Console Project.NumTextBox: NumTextBox初始版本: TextBox控件重写之NumTextBox，主要实现的功能是，只允许输入数字，或String,Numeric,Currency,Decimal,Float,Double,Short,Int,Long 此为初始版本PSCodeplex: PS CodePlex 0.2: PS CodePlex 0.2 has some breaking changes to the parameters. A few of the parameters are renamed and a few are made as switch parameters. Add-Rele...Quick Performance Monitor: QPerfMon First release - Version 1.0.0: The first release of the utility.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.2: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...ScrewWiki Form Auth Provider: ScrewWiki Forms Authentication: Initial ReleaseSee.Sharper: See.Sharper.Docs-1.10.3.4: HTML documentation (including Doxygen project)See.Sharper: See.Sharper-1.10.3.4: Solution (Source files, debug and release binaries)Solar.Generic: Solar.Generic 0.8.0.0 Beta (Revised, Renamed): Solar.Generic 0.8.0.0 (Revised & Renamed) Renamed project from Solar.Commons to Solar.Generic. Project solution file is now in format of Visual ...Solar.Security: Solar.Security 1.1.0.0: Performed several major refactorings of code base. Stripped In-Memory implementation of IConfiguration interface of transactional behavior due to...sPWadmin: pwAdmin v0.7: -Star System Simulator: Star System Simulator 2.3: Changes in this release: Fixed several localisation issues. Features in this release: Model star systems in 3D. Euler-Cromer method. Improved...SysI: sysi, stable and ready: This time for sure.TheWhiteAmbit: TheWhiteAmbit - Demo: Two little demos demonstrating: - fast realtime raytracing - generating bent normals for shading (CUDA capable GPU needed = nVidia GeForce >8x00)VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 22 Beta: Build 22 (beta) New: Visual Studio 2010 RC support (VsTortoise for Visual Studio 2010 RC screenshots) New: VsTortoise integrates in to Solution E...WinMergeFS: WinMergeFS 0.1.42128alpha: WinMergeFS provides AuFS functionality for windows. With WinMergeFS users can mount multiple directories into a virtual drive. Plugin based root se...WSDLGenerator: WSDLGenerator 0.0.0.2: - Bugs fixed - Code refactored - Added support for custom typesXNA Light Pre Pass Renderer: LightPrePassRendererXNA: Zipped source code for the light pre pass renderer made with XNA.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsUmbraco CMSRawrBlogEngine.NETSDS: Scientific DataSet library and toolsMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesIonics Isapi Rewrite FilterMDT Web FrontEndDiffPlex - a .NET Diff Generator

Read the article

Internationalize WebCenter Portal - Content Presenter

- by Stefan Krantz

Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4: 5: 6: public NLSHelperBean() { 7: super(); 8: } 9: 10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22: 23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39: 40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

Read the article

Mr Flibble: As Seen Through a Lens, Darkly

- by Phil Factor

One of the rewarding things about getting involved with Simple-Talk has been in meeting and working with some pretty daunting talents. I’d like to say that Dom Reed’s talents are at the end of the visible spectrum, but then there is Richard, who pops up on national radio occasionally, presenting intellectual programs, Andrew, master of the ukulele, with his pioneering local history work, and Tony with marathon running and his past as a university lecturer. However, Dom, who is Red Gate’s head of creative design and who did the preliminary design work for Simple-Talk, has taken the art photography to an extreme that was impossible before Photoshop. He’s not the first person to take a photograph of himself every day for two years, but he is definitely the first to weave the results into a frightening narrative that veers from comedy to pathos, using all the arts of Photoshop to create a fictional character, Mr Flibble. Have a look at some of the Flickr pages. Uncle Spike The B-Men – Woolverine The 2011 BoyZ iN Sink reunion tour turned out to be their last Error 404 – Flibble not found Mr Flibble is not a normal type of alter-ego. We generally prefer to choose bronze age warriors of impossibly magnificent physique and stamina; superheroes who bestride the world, scorning the forces of evil and anarchy in a series noble and righteous quests. Not so Dom, whose Mr Flibble is vulnerable, and laid low by an addiction to toxic substances. His work has gained an international cult following and is used as course material by several courses in photography. Although his work was for a while ignored by the more conventional world of ‘art’ photography they became famous through the internet. His photos have received well over a million views on Flickr. It was definitely time to turn this work into a book, because the whole sequence of images has its maximum effect when seen in sequence. He has a Kickstarter project page, one of the first following the recent UK launch of the crowdfunding platform. The publication of the book should be a major event and the £45 I shall divvy up will be one of the securest investments I shall ever make. The local news in Cambridge picked up on the project and I can quote from the report by the excellent Cabume website , the source of Tech news from the ‘Cambridge cluster’ Put really simply Mr Flibble likes to dress up and take pictures of himself. One of the benefits of a split personality, however is that Mr Flibble is supported in his endeavour by Reed’s top notch photography skills, supreme mastery of Photoshop and unflinching dedication to the cause. The duo have collaborated to take a picture every day for the past 730-plus days. It is not a big surprise that neither Mr Flibble nor Reed watches any TV: In addition to his full-time role at Cambridge software house,Red Gate Software as head of creativity and the two to five hours a day he spends taking the Mr Flibble shots, Reed also helps organise the . And now Reed is using Kickstarter to see if the world is ready for a Mr Flibble coffee table book. Judging by the early response it is. At the time of writing, just a few days after it went live, ‘I Drink Lead Paint: An absurd photography book by Mr Flibble’ had raised £1,545 of the £10,000 target it needs to raise by the Friday 30 November deadline from 37 backers. Following the standard Kickstarter template, Reed is offering a series of rewards based on the amount pledged, ranging from a Mr Flibble desktop wallpaper for pledges of £5 or more to a signed copy of the book for pledges of £45 or more, right up to a starring role in the book for £1,500. Mr Flibble is unquestionably one of the more deranged Kickstarter hopefuls, but don’t think for a second that he doesn’t have a firm grasp on the challenges he faces on the road to immortalisation on 150 gsm stock. Under the section ‘risks and challenges’ on his Kickstarter page his statement begins: “An angry horde of telepathic iguanas discover the world’s last remaining stock of vintage lead paint and hold me to ransom. Gosh how I love to guzzle lead paint. Anyway… faced with such brazen bravado, I cower at the thought of taking on their combined might and die a sad and lonely Flibble deprived of my one and only true liquid love.” At which point, Reed manages to wrestle away the keyboard, giving him the opportunity to present slightly more cogent analysis of the obstacles the project must still overcome. We asked Reed a few questions about Mr Flibble’s Kickstarter adventure and felt that his responses were worth publishing in full: Firstly, how did you manage it – holding down a full time job and also conceiving and executing these ideas on a daily basis? I employed a small team of ferocious gerbils to feed me ideas on a daily basis. Whilst most of their ideas were incomprehensibly rubbish and usually revolved around food, just occasionally they’d give me an idea like my B-Men series. As a backup plan though, I found that the best way to generate ideas was to actually start taking photos. If I were to stand in front of the camera, pull a silly face, place a vegetable on my head or something else equally stupid, the resulting photo of that would typically spark an idea when I came to look at it. Sitting around idly trying to think of an idea was doomed to result in no ideas. I admit that I really struggled with time. I’m proud that I never missed a day, but it was definitely hard when you were late from work, tired or doing something socially on the same day. I don’t watch TV, which I guess really helps, because I’d frequently be spending 2-5 hours taking and processing the photos every day. Are there any overlaps between software development and creative thinking? Software is an inherently creative business and the speed that it moves ensures you always have to find solutions to new things. Everyone in the team needs to be a problem solver. Has it helped me specifically with my photography? Probably. Working within teams that continually need to figure out new stuff keeps the brain feisty I suppose, and I guess I’m continually exposed to a lot of possible sources of inspiration. How specifically will this Kickstarter project allow you to test the commercial appeal of your work and do you plan to get the book into shops? It’s taken a while to be confident saying it, but I know that people like the work that I do. I’ve had well over a million views of my pictures, many humbling comments and I know I’ve garnered some loyal fans out there who anticipate my next photo. For me, this Kickstarter is about seeing if there’s worth to my work beyond just making people smile. In an online world where there’s an abundance of freely available content, can you hope to receive anything from what you do, or would people just move onto the next piece of content if you happen to ask for some support? A book has been the single-most requested thing that people have asked me to produce and it’s something that I feel would showcase my work well. It’s just hard to convince people in the publishing industry just now to take any kind of risk – they’ve been hit hard. If I can show that people would like my work enough to buy a book, then it sends a pretty clear picture that publishers might hear, or it gives me the confidence enough to invest in myself a bit more – hard to do when you’re riddled with self-doubt! I’d love to see my work in the shops, yes. I could see it being the thing that someone flips through idly as they’re Christmas shopping and recognizing that it’d be just the perfect gift for their difficult to buy for friend or relative. That said, working in the software industry means I’m clearly aware of how I could use technology to distribute my work, but I can’t deny that there’s something very appealing to having a physical thing to hold in your hands. If the project is successful is there a chance that it could become a full-time job? At the moment that seems like a distant dream, as should this be successful, there are many more steps I’d need to take to reach any kind of business viability. Kickstarter seems exactly that – a way for people to help kick start me into something that could take off. If people like my work and want me to succeed with it, then taking a look at my Kickstarter page (and hopefully pledging a bit of support) would make my elbows blush considerably. So there is is. An opportunity to open the wallet just a bit to ensure that one of the more unusual talents sees the light in the format it deserves.

Read the article

SQL SERVER – Guest Posts – Feodor Georgiev – The Context of Our Database Environment – Going Beyond the Internal SQL Server Waits – Wait Type – Day 21 of 28

- by pinaldave

This guest post is submitted by Feodor. Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. In this article Feodor explains the server-client-server process, and concentrated on the mutual waits between client and SQL Server. This is essential in grasping the concept of waits in a ‘global’ application plan. Recently I was asked to write a blog post about the wait statistics in SQL Server and since I had been thinking about writing it for quite some time now, here it is. It is a wide-spread idea that the wait statistics in SQL Server will tell you everything about your performance. Well, almost. Or should I say – barely. The reason for this is that SQL Server is always a part of a bigger system – there are always other players in the game: whether it is a client application, web service, any other kind of data import/export process and so on. In short, the SQL Server surroundings look like this: This means that SQL Server, aside from its internal waits, also depends on external waits and settings. As we can see in the picture above, SQL Server needs to have an interface in order to communicate with the surrounding clients over the network. For this communication, SQL Server uses protocol interfaces. I will not go into detail about which protocols are best, but you can read this article. Also, review the information about the TDS (Tabular data stream). As we all know, our system is only as fast as its slowest component. This means that when we look at our environment as a whole, the SQL Server might be a victim of external pressure, no matter how well we have tuned our database server performance. Let’s dive into an example: let’s say that we have a web server, hosting a web application which is using data from our SQL Server, hosted on another server. The network card of the web server for some reason is malfunctioning (think of a hardware failure, driver failure, or just improper setup) and does not send/receive data faster than 10Mbs. On the other end, our SQL Server will not be able to send/receive data at a faster rate either. This means that the application users will notify the support team and will say: “My data is coming very slow.” Now, let’s move on to a bit more exciting example: imagine that there is a similar setup as the example above – one web server and one database server, and the application is not using any stored procedure calls, but instead for every user request the application is sending 80kb query over the network to the SQL Server. (I really thought this does not happen in real life until I saw it one day.) So, what happens in this case? To make things worse, let’s say that the 80kb query text is submitted from the application to the SQL Server at least 100 times per minute, and as often as 300 times per minute in peak times. Here is what happens: in order for this query to reach the SQL Server, it will have to be broken into a of number network packets (according to the packet size settings) – and will travel over the network. On the other side, our SQL Server network card will receive the packets, will pass them to our network layer, the packets will get assembled, and eventually SQL Server will start processing the query – parsing, allegorizing, generating the query execution plan and so on. So far, we have already had a serious network overhead by waiting for the packets to reach our Database Engine. There will certainly be some processing overhead – until the database engine deals with the 80kb query and its 20 subqueries. The waits you see in the DMVs are actually collected from the point the query reaches the SQL Server and the packets are assembled. Let’s say that our query is processed and it finally returns 15000 rows. These rows have a certain size as well, depending on the data types returned. This means that the data will have converted to packages (depending on the network size package settings) and will have to reach the application server. There will also be waits, however, this time you will be able to see a wait type in the DMVs called ASYNC_NETWORK_IO. What this wait type indicates is that the client is not consuming the data fast enough and the network buffers are filling up. Recently Pinal Dave posted a blog on Client Statistics. What Client Statistics does is captures the physical flow characteristics of the query between the client(Management Studio, in this case) and the server and back to the client. As you see in the image, there are three categories: Query Profile Statistics, Network Statistics and Time Statistics. Number of server roundtrips–a roundtrip consists of a request sent to the server and a reply from the server to the client. For example, if your query has three select statements, and they are separated by ‘GO’ command, then there will be three different roundtrips. TDS Packets sent from the client – TDS (tabular data stream) is the language which SQL Server speaks, and in order for applications to communicate with SQL Server, they need to pack the requests in TDS packets. TDS Packets sent from the client is the number of packets sent from the client; in case the request is large, then it may need more buffers, and eventually might even need more server roundtrips. TDS packets received from server –is the TDS packets sent by the server to the client during the query execution. Bytes sent from client – is the volume of the data set to our SQL Server, measured in bytes; i.e. how big of a query we have sent to the SQL Server. This is why it is best to use stored procedures, since the reusable code (which already exists as an object in the SQL Server) will only be called as a name of procedure + parameters, and this will minimize the network pressure. Bytes received from server – is the amount of data the SQL Server has sent to the client, measured in bytes. Depending on the number of rows and the datatypes involved, this number will vary. But still, think about the network load when you request data from SQL Server. Client processing time – is the amount of time spent in milliseconds between the first received response packet and the last received response packet by the client. Wait time on server replies – is the time in milliseconds between the last request packet which left the client and the first response packet which came back from the server to the client. Total execution time – is the sum of client processing time and wait time on server replies (the SQL Server internal processing time) Here is an illustration of the Client-server communication model which should help you understand the mutual waits in a client-server environment. Keep in mind that a query with a large ‘wait time on server replies’ means the server took a long time to produce the very first row. This is usual on queries that have operators that need the entire sub-query to evaluate before they proceed (for example, sort and top operators). However, a query with a very short ‘wait time on server replies’ means that the query was able to return the first row fast. However a long ‘client processing time’ does not necessarily imply the client spent a lot of time processing and the server was blocked waiting on the client. It can simply mean that the server continued to return rows from the result and this is how long it took until the very last row was returned. The bottom line is that developers and DBAs should work together and think carefully of the resource utilization in the client-server environment. From experience I can say that so far I have seen only cases when the application developers and the Database developers are on their own and do not ask questions about the other party’s world. I would recommend using the Client Statistics tool during new development to track the performance of the queries, and also to find a synchronous way of utilizing resources between the client – server – client. Here is another example: think about similar setup as above, but add another server to the game. Let’s say that we keep our media on a separate server, and together with the data from our SQL Server we need to display some images on the webpage requested by our user. No matter how simple or complicated the logic to get the images is, if the images are 500kb each our users will get the page slowly and they will still think that there is something wrong with our data. Anyway, I don’t mean to get carried away too far from SQL Server. Instead, what I would like to say is that DBAs should also be aware of ‘the big picture’. I wrote a blog post a while back on this topic, and if you are interested, you can read it here about the big picture. And finally, here are some guidelines for monitoring the network performance and improving it: Run a trace and outline all queries that return more than 1000 rows (in Profiler you can actually filter and sort the captured trace by number of returned rows). This is not a set number; it is more of a guideline. The general thought is that no application user can consume that many rows at once. Ask yourself and your fellow-developers: ‘why?’. Monitor your network counters in Perfmon: Network Interface:Output queue length, Redirector:Network errors/sec, TCPv4: Segments retransmitted/sec and so on. Make sure to establish a good friendship with your network administrator (buy them coffee, for example J ) and get into a conversation about the network settings. Have them explain to you how the network cards are setup – are they standalone, are they ‘teamed’, what are the settings – full duplex and so on. Find some time to read a bit about networking. In this short blog post I hope I have turned your attention to ‘the big picture’ and the fact that there are other factors affecting our SQL Server, aside from its internal workings. As a further reading I would still highly recommend the Wait Stats series on this blog, also I would recommend you have the coffee break conversation with your network admin as soon as possible. This guest post is written by Feodor Georgiev. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL

Read the article

E-Business Suite Technology Sessions at OAUG Collaborate 12

- by Max Arderius

Members of our E-Business Suite Applications Technology Group will be at the OAUG Collaborate 12 conference at the Mandalay Bay Convention Center in Las Vegas, Nevada on April 22 to 26, 2012. Please drop by any of our sessions to hear the latest news and meet up with us. Speaker Sessions Session 9675Planning Your Oracle E-Business Suite Upgrade from Release 11i to 12.1 and BeyondAnne Carlson, Senior Director, Applications Technology Group, OracleSunday, April 22, 2:00 pm - 3:00 pmLocation: Jasmine B Attend this session to hear the latest Oracle E-Business Suite Release 12.1 upgrade planning tips gleaned from customers who have already performed the upgrade. Youll get specific, cross-product advice on how to decide your project's scope, understand the factors that affect your project's duration, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. Session 9401Minimizing Oracle E-Business Suite Maintenance DowntimesElke Phelps, Principal Product Manager, Applications Technology Group, OracleKevin Hudson, Sr. Director, Applications Technology Group, OracleSunday, April 22, 2:10 pm - 3:10 pmLocation: South Seas EThis session starts with an architecture review of Oracle E-Business Suite fundamentals and then moves to a practical view of the different tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in no-interactive mode, staged APPL_TOPs, shared file systems, deferring system-wide database tasks, avoiding resource bottlenecks etc... This session also describes the online patching capabilities coming in Release 12.2. Session 9368Oracle E-Business Suite Technology: Latest Features and RoadmapLisa Parekh, Vice President, Applications Technology Group, Oracle Sunday, April 22, 4:30 pm - 5:30 pmLocation: South Seas EThis session provides an overview of Oracle E-Business Suite technology strategy, the capabilities and associated business benefits of recent releases, as well as a review of the product roadmap. As a cornerstone session for Oracle E-Business Suite technology, come hear about the latest usability enhancements, systems administration and configuration management tools, security-related updates, and tools and options for extending, customizing, and integrating the Oracle E-Business Suite with other applications. Session 10709Oracle E-Business Suite Applications Strategy and General Manager UpdateCliff Godwin, Sr. VP, Application Development, OracleMonday, April 23, 2:30 pm - 3:30 pmLocation: Mandalay Bay DIn this session, hear from Oracle E-Business Suite General Manager Cliff Godwin as he delivers an update on the Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You will come away with an understanding of the value Oracle E-Business Suite applications deliver now and in the future. Session 9398How to Reduce TCO Using Oracle Application Management Suite for Oracle E-Business SuiteAngelo Rosado, Principal Product Manager, Applications Technology Group, OracleKenneth Baxter, Principal Product Strategy Manager, Management Pack Fusion Middleware Management, OracleTuesday, April 24, 8:00 am - 9:00 amLocation: Breakers GThis session covers the methods and tools you can use to gain insights into your end users, troubleshoot performance problems, define service-level objectives, and proactively monitor your end-to-end Oracle E-Business Suite environment to meet your availability and performance targets. Come hear how you can manage, diagnose, and monitor the Oracle E-Business Suite environment from a single console by using Oracle Enterprise Manager together with the Oracle Application Management Suite for Oracle E-Business Suite. Session 9370 Coexistence of Oracle E-Business Suite and Oracle Fusion Applications: Platform Perspective Nadia Bendjedou, Senior Director, Product Strategy, Oracle Tuesday, April 24, 2:00 pm - 3:00 pm Location: South Seas E Join us at this session if you are wondering which tools to integrate your data, your processes and your User Interface. Or what tools to customize and extend your screens and reports (OAF, Forms, ADF, Oracle Reports, BI etc....), what tools to secure, protect and manage your Oracle E-Business Suite etc... Or simply if you are looking for a technical roadmap for your Oracle E-Business Suite infrastructure to CO-EXIST with the rest of your enterprise applications including Oracle Fusion Applications. Session 9375 Oracle E-Business Suite Directions: Deployment and System AdministrationMax Arderius, Manager, Applications Development Group, OracleTuesday, April 24, 4:30 pm - 5:30 pmLocation: Breakers GWhat's coming in the next major version of Oracle E-Business Suite 12? This session covers the latest technology stack, including the use of Oracle WebLogic Server and Oracle Database 11g Release 2. Topics include an architectural overview, installation and upgrade options, new configuration options, and new tools for hot-cloning and automated "lights out" cloning. Learn about how online patching will reduce your database patching downtimes to the time it takes to bounce your database server.Session 9369Oracle E-Business Suite Technology Certification Primer and RoadmapSteven Chan, Sr. Director, Applications Technology Group, Oracle Wednesday, April 25, 8:15 am - 9:15 amLocation: South Seas FThis Oracle Development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including database releases/options, Java, Oracle Forms, Oracle Containers for J2EE, desktop OS, browsers, JRE releases, Office/OpenOffice, development and Web authoring tools, user authentication and management, BI, security options, clouds, Oracle VM etc.... It also covers the most-commonly-asked questions about technology stack component support dates and upgrade implications. Session 9407The Latest Oracle E-Business Suite Release User Interface and Usability EnhancementsGustavo Jimenez, Sr. Manager, Applications Technology Group, Oracle Wednesday, April 25, 1:00 pm - 2:00 pmLocation: South Seas GIn this session, developers will get a detailed look at new features designed to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include rich new UI capabilities such as new home page features, Navigator and Favorites pull-down menus, Oracle ADF task flows etc.... In addition, we will cover the personalization/extensibility enhancements, business layer extensions, Oracle ADF integration and much more. Session 9374Best Practices for Oracle E-Business Suite Performance Tuning and Upgrade OptimizationIsam Alyousfi, Senior Director, Applications Performance, OracleUdayan Parvate, Director, Release Engineering, Quality and Release Management, Oracle Thursday, April 26, 8:30 am - 9:30 amLocation: South Seas FThis presentation will offer tips and techniques on tuning all the layers of the Oracle E-Business Suite stack including the various tiers of the Oracle E-Business Suite environment. You will learn about tuning Oracle Forms, Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues on the Java and Java Virtual Machine layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules.Session 9412 Oracle E-Business Suite 12.1 Desktop Integration: Beyond Oracle Applications Desktop IntegratorGustavo Jimenez, Sr. Manager, Applications Technology Group, OracleThursday, April 26, 8:30 am - 9:30 amLocation: Breakers GThis session describes the new expanded functionality in Oracle Web Applications Desktop Integrator, Oracle Report Manager, and dedicated integrators. You have more options for desktop integration now, not fewer. Topics include an overview of prepackaged solutions for integrating Oracle E-Business Suite with desktop applications such as Microsoft Excel, Word, and Projects. The session also discusses how you can use the Desktop Integration Framework feature to create your own integrators quickly and easily.Session 9533 Upgrading your Customizations to Oracle E-Business Suite Release 12.1Sara Woodhull, Principal Product Manager, Applications Technology Group, Oracle Thursday, April 26, 11:00 am - 12:00 pmLocation: South Seas FHave you personalized Forms or OA Framework screens? Have you used mod_plsql or Applications Express to tailor your Release 11i functionality? Have you extended or customized your Release 11i environment using other tools? This session will help you understand customization scenarios, use cases, tools, and technologies for ensuring that your Oracle E-Business Suite Release 12.1 environment fits your users' needs closely and that any future customizations will be easy to upgrade. Special Interest Groups (SIG) Session 10535OAUG Database SIG- Part IMichael Brown, Colibri Limited Company Sunday, April 22, 3:20 pm - 4:20 pmLocation: South Seas FThis is the annual meeting of the Database SIG at Collaborate. The call for candidates for the chair will be closed at the meeting. Plans include a speaker from Oracle and a presentation on applications performance. The details of the meeting will be posted on http://www.dbsig.com. Guest Presentation: Oracle E-Business Suite Database PerformanceIsam Alyousfi, Senior Director, Applications Performance, Oracle Session 10720OAUG EBS Applications Technology SIG- Part ISrini Chaval, Cummins Monday, April 23, 2:30 pm - 3:30 pmLocation: South Seas F Guest Presentation:Oracle E-Business Suite Technology Certification RoadmapSteven Chan, Sr. Director, Applications Technology Group, Oracle Session 10510OAUG EBS Applications Technology SIG- Part IISrini Chaval, CumminsMonday, April 23, 3:45 pm - 4:45 pmLocation: South Seas F Guest Presentation:Oracle E-Business Suite 12.2 Online Patching Kevin Hudson, Sr. Director, Applications Technology Group, Oracle Session 10522 OAUG Upgrade SIG- Part IISandra Vucinic, VLAD Group, Inc. Wednesday, April 25, 3:00 pm - 4:00 pmLocation: South Seas FUpgrade SIG will host a business meeting followed by panel (Q&A) related to EBS Upgrade topics and Oracle presentation. Guest Presentation:Upgrading E-Business Suite Amrita Mehrok, Director, Financials Product Strategy, Oracle Nadia Bendjedou, Senior Director, Product Strategy, Oracle Session 10722OAUG Upgrade SIG- Part IISandra Vucinic, VLAD Group, Inc. Wednesday, April 25, 4:15 pm - 5:15 pmLocation: South Seas FUpgrade SIG will host a business meeting followed by panel (Q&A) related to EBS Upgrade topics and Oracle presentation. Guest Presentation:Tuning the Oracle E-Business Suite Upgrade Isam Alyousfi, Senior Director, Applications Performance, Oracle Panels Session 9360Oracle E-Business Suite Cloning PanelSandra Vucinic, VLAD Group, Inc. Guest Speaker: Max Arderius, Manager, Applications Technology Group, OracleWednesday, April 25, 9:30 am - 10:30 amLocation: South Seas FThis panel will discuss differences between available release 11i, R12 and R12.1 cloning methods. Advantages and disadvantages of each cloning method will be discussed in depth. This panel of experienced database administrators will lead a discussion focusing on the questions such as “which cloning method is best to use in your particular environment”. Attendees will gain practical knowledge, tips and tricks to assist with cloning of Oracle E-Business Suite release 11i, R12 and R12.1 environments. Session 10022Oracle Applications Tuning PanelMark Farnham, Rightsizing, Inc.Guest Speaker: Isam Alyousfi, Senior Director, Applications Performance, OracleThursday, April 26, 09:45 am - 10:45 amLocation: South Seas FThis applications performance panel session, sponsored by the OAUG Database SIG, provides a Q&A forum focused on helping you address your Oracle Applications (Oracle E-Business Suite and Oracle's PeopleSoft Enterprise and Siebel applications) performance- and scalability-related issues. The panel comprises several well-known Oracle Applications performance experts. Topic areas include Oracle Database; the network; and the applications tier, including patching and upgrade performance. For complete listing of all speaker sessions and other activities, please visit the OAUG Collaborate Web Site.

Read the article

Windows Azure Root CAs and SSL Client Certificates

- by Your DisplayName here!

I ran into some problems while trying to make SSL client certificates work for StarterSTS 1.5. In theory you have to do two things (via startup tasks): Unlock the SSL section in IIS Install all the root certificates for the client certs you want to accept I did that. But it still does not work. While inspecting the event log, I stumbled over an schannel error message that I’ve never seen before: “When asking for client authentication, this server sends a list of trusted certificate authorities to the client. The client uses this list to choose a client certificate that is trusted by the server. Currently, this server trusts so many certificate authorities that the list has grown too long. This list has thus been truncated. The administrator of this machine should review the certificate authorities trusted for client authentication and remove those that do not really need to be trusted.” WTF? And indeed standard Azure (web role) VMs trust 275 root CAs (see attached list). Including kinda obscure ones. I don’t really know why MS made this design decision. It seems just wrong (including breaking the SSL client cert functionality). Deleting like 60% of them made SSL client certs from my CA work. So I guess I now have to find an automated way to attach CTLs to my site…joy. Exported list of trusted CA (as of 30th Dec 2010) AC Raíz Certicámara S.A. (4/2/2030 9:42:02 PM) AC RAIZ FNMT-RCM (1/1/2030 12:00:00 AM) A-CERT ADVANCED (10/23/2011 2:14:14 PM) Actalis Authentication CA G1 (6/25/2022 2:06:00 PM) Agence Nationale de Certification Electronique (8/12/2037 9:03:17 AM) Agence Nationale de Certification Electronique (8/12/2037 9:58:14 AM) Agencia Catalana de Certificacio (NIF Q-0801176-I) (1/7/2031 10:59:59 PM) America Online Root Certification Authority 1 (11/19/2037 8:43:00 PM) America Online Root Certification Authority 2 (9/29/2037 2:08:00 PM) ANCERT Certificados CGN (2/11/2024 5:27:12 PM) ANCERT Certificados Notariales (2/11/2024 3:58:26 PM) ANCERT Corporaciones de Derecho Publico (2/11/2024 5:22:45 PM) A-Trust-nQual-01 (11/30/2014 11:00:00 PM) A-Trust-nQual-03 (8/17/2015 10:00:00 PM) A-Trust-Qual-01 (11/30/2014 11:00:00 PM) A-Trust-Qual-02 (12/2/2014 11:00:00 PM) A-Trust-Qual-03a (4/24/2018 10:00:00 PM) Austria Telekom-Control Kommission (9/24/2005 12:40:00 PM) Austrian Society for Data Protection (2/12/2009 11:30:30 AM) Austrian Society for Data Protection GLOBALTRUST Certification Service (9/18/2036 2:12:35 PM) Autoridad Certificadora Raiz de la Secretaria de Economia (5/9/2025 12:00:00 AM) Autoridad de Certificacion de la Abogacia (6/13/2030 10:00:00 PM) Autoridad de Certificacion Firmaprofesional CIF A62634068 (10/24/2013 10:00:00 PM) Autoridade Certificadora Raiz Brasileira (11/30/2011 11:59:00 PM) Baltimore CyberTrust Root (5/12/2025 11:59:00 PM) BIT AdminCA-CD-T01 (1/25/2016 12:36:19 PM) BIT Admin-Root-CA (11/10/2021 7:51:07 AM) Buypass Class 2 CA 1 (10/13/2016 10:25:09 AM) Buypass Class 3 CA 1 (5/9/2015 2:13:03 PM) CA Disig (3/22/2016 1:39:34 AM) CertEurope (3/27/2037 11:00:00 PM) CERTICAMARA S.A. (2/23/2015 5:10:37 PM) Certicámara S.A. (5/23/2011 10:00:00 PM) Certigna (6/29/2027 3:13:05 PM) Certipost E-Trust Primary Normalised CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary Qualified CA (7/26/2020 10:00:00 AM) Certipost E-Trust Primary TOP Root CA (7/26/2025 10:00:00 AM) Certisign Autoridade Certificadora AC1S (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC2 (6/27/2018 12:00:00 AM) Certisign Autoridade Certificadora AC3S (7/9/2018 8:56:32 PM) Certisign Autoridade Certificadora AC4 (6/27/2018 12:00:00 AM) CertPlus Class 1 Primary CA (7/6/2020 11:59:59 PM) CertPlus Class 2 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3 Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3P Primary CA (7/6/2019 11:59:59 PM) CertPlus Class 3TS Primary CA (7/6/2019 11:59:59 PM) CertRSA01 (3/3/2010 2:59:59 PM) certSIGN Root CA (7/4/2031 5:20:04 PM) Certum (6/11/2027 10:46:39 AM) Certum Trusted Network CA (12/31/2029 12:07:37 PM) Chambers of Commerce Root - 2008 (7/31/2038 12:29:50 PM) Chambersign Chambers of Commerce Root (9/30/2037 4:13:44 PM) Chambersign Global Root (9/30/2037 4:14:18 PM) Chambersign Public Notary Root (9/30/2037 4:14:49 PM) Chunghwa Telecom Co. Ltd. (12/20/2034 2:31:27 AM) Cisco Systems (5/14/2029 8:25:42 PM) CNNIC Root (4/16/2027 7:09:14 AM) Common Policy (10/15/2027 4:08:00 PM) COMODO (12/31/2028 11:59:59 PM) COMODO (1/18/2038 11:59:59 PM) COMODO (12/31/2029 11:59:59 PM) ComSign Advanced Security CA (3/24/2029 9:55:55 PM) ComSign CA (3/19/2029 3:02:18 PM) ComSign Secured CA (3/16/2029 3:04:56 PM) Correo Uruguayo - Root CA (12/31/2030 2:59:59 AM) Cybertrust Global Root (12/15/2021 8:00:00 AM) DanID (2/11/2037 9:09:30 AM) DanID (4/5/2021 5:03:17 PM) Deutsche Telekom Root CA 2 (7/9/2019 11:59:00 PM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiCert (11/10/2031 12:00:00 AM) DigiNotar Root CA (3/31/2025 6:19:21 PM) DIRECCION GENERAL DE LA POLICIA (2/8/2036 10:59:59 PM) DST (ABA.ECOM) CA (7/9/2009 5:33:53 PM) DST (ANX Network) CA (12/9/2018 4:16:48 PM) DST (Baltimore EZ) CA (7/3/2009 7:56:53 PM) DST (National Retail Federation) RootCA (12/8/2008 4:14:16 PM) DST (United Parcel Service) RootCA (12/7/2008 12:25:46 AM) DST ACES CA X6 (11/20/2017 9:19:58 PM) DST Root CA X3 (9/30/2021 2:01:15 PM) DST RootCA X1 (11/28/2008 6:18:55 PM) DST RootCA X2 (11/27/2008 10:46:16 PM) DSTCA E1 (12/10/2018 6:40:23 PM) DSTCA E2 (12/9/2018 7:47:26 PM) DST-Entrust GTI CA (12/9/2018 12:32:24 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) D-TRUST GmbH (6/8/2012 11:47:46 AM) D-TRUST GmbH (5/16/2022 5:20:47 AM) EBG Elektronik Sertifika Hizmet Saglayicisi (8/14/2016 12:31:09 AM) E-Certchile (9/5/2028 7:39:41 PM) Echoworx Root CA2 (10/7/2030 10:49:13 AM) ECRaizEstado (6/23/2030 1:41:27 PM) EDICOM (4/13/2028 4:24:22 PM) E-GÜVEN Elektronik Sertifika Hizmet Saglayicisi (1/4/2017 11:32:48 AM) E-ME SSI (RCA) (5/19/2027 8:48:15 AM) Entrust (11/27/2026 8:53:42 PM) Entrust (5/25/2019 4:39:40 PM) Entrust.net (12/7/2030 5:55:54 PM) Equifax Secure eBusiness CA-1 (6/21/2020 4:00:00 AM) Equifax Secure eBusiness CA-2 (6/23/2019 12:14:45 PM) Equifax Secure Global eBusiness CA-1 (6/21/2020 4:00:00 AM) eSign Australia: eSign Imperito Primary Root CA (5/23/2012 11:59:59 PM) eSign Australia: Gatekeeper Root CA (5/23/2014 11:59:59 PM) eSign Australia: Primary Utility Root CA (5/23/2012 11:59:59 PM) Fabrica Nacional de Moneda y Timbre (3/18/2019 3:26:19 PM) GeoTrust (8/22/2018 4:41:51 PM) GeoTrust (7/16/2036 11:59:59 PM) GeoTrust Global CA (5/21/2022 4:00:00 AM) GeoTrust Global CA 2 (3/4/2019 5:00:00 AM) GeoTrust Primary Certification Authority - G2 (1/18/2038 11:59:59 PM) GeoTrust Primary Certification Authority - G3 (12/1/2037 11:59:59 PM) GeoTrust Universal CA (3/4/2029 5:00:00 AM) GeoTrust Universal CA 2 (3/4/2029 5:00:00 AM) Global Chambersign Root - 2008 (7/31/2038 12:31:40 PM) GlobalSign (1/28/2028 12:00:00 PM) GlobalSign (12/15/2021 8:00:00 AM) Go Daddy Class 2 Certification Authority (6/29/2034 5:06:20 PM) GTE CyberTrust Global Root (8/13/2018 11:59:00 PM) GTE CyberTrust Root (4/3/2004 11:59:00 PM) GTE CyberTrust Root (2/23/2006 11:59:00 PM) Halcom CA FO (6/5/2020 10:33:31 AM) Halcom CA PO 2 (2/7/2019 6:33:31 PM) Hongkong Post Root CA (1/16/2010 11:59:00 PM) Hongkong Post Root CA 1 (5/15/2023 4:52:29 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) I.CA První certifikacní autorita a.s. (4/1/2018 12:00:00 AM) InfoNotary (3/6/2026 5:33:05 PM) IPS SERVIDORES (12/29/2009 11:21:07 PM) IZENPE S.A. (1/30/2018 11:00:00 PM) Izenpe.com (12/13/2037 8:27:25 AM) Japan Certification Services, Inc. SecureSign RootCA1 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA11 (4/8/2029 4:56:47 AM) Japan Certification Services, Inc. SecureSign RootCA2 (9/15/2020 2:59:59 PM) Japan Certification Services, Inc. SecureSign RootCA3 (9/15/2020 2:59:59 PM) Japan Local Government PKI Application CA (3/31/2016 2:59:59 PM) Japanese Government ApplicationCA (12/12/2017 3:00:00 PM) Juur-SK AS Sertifitseerimiskeskus (8/26/2016 2:23:01 PM) KamuSM (8/21/2017 11:37:07 AM) KISA RootCA 1 (8/24/2025 8:05:46 AM) KISA RootCA 3 (11/19/2014 6:39:51 AM) Macao Post eSignTrust (1/29/2013 11:59:59 PM) MicroSec e-Szigno Root CA (4/6/2017 12:28:44 PM) Microsoft Authenticode(tm) Root (12/31/1999 11:59:59 PM) Microsoft Root Authority (12/31/2020 7:00:00 AM) Microsoft Root Certificate Authority (5/9/2021 11:28:13 PM) Microsoft Timestamp Root (12/30/1999 11:59:59 PM) MOGAHA Govt of Korea (4/21/2012 9:07:23 AM) MOGAHA Govt of Korea GPKI (3/15/2017 6:00:04 AM) NetLock Arany (Class Gold) Fotanúsítvány (12/6/2028 3:08:21 PM) NetLock Expressz (Class C) Tanusitvanykiado (2/20/2019 2:08:11 PM) NetLock Kozjegyzoi (Class A) Tanusitvanykiado (2/19/2019 11:14:47 PM) NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado (12/15/2022 1:47:11 AM) NetLock Platina (Class Platinum) Fotanúsítvány (12/6/2028 3:12:44 PM) NetLock Uzleti (Class B) Tanusitvanykiado (2/20/2019 2:10:22 PM) Netrust CA1 (3/30/2021 2:57:45 AM) Network Solutions (12/31/2029 11:59:59 PM) NLB Nova Ljubljanska Banka d.d. Ljubljana (5/15/2023 12:22:45 PM) OISTE WISeKey Global Root GA CA (12/11/2037 4:09:51 PM) Post.Trust Root CA (7/5/2022 9:12:33 AM) Post.Trust Root CA (8/20/2010 1:56:21 PM) Posta CA Root (10/20/2028 12:52:08 PM) POSTarCA (2/7/2023 11:06:58 AM) QuoVadis Root CA 2 (11/24/2031 6:23:33 PM) QuoVadis Root CA 3 (11/24/2031 7:06:44 PM) QuoVadis Root Certification Authority (3/17/2021 6:33:33 PM) Root CA Generalitat Valenciana (7/1/2021 3:22:47 PM) RSA Security 2048 V3 (2/22/2026 8:39:23 PM) SECOM Trust Systems CO LTD (6/6/2037 2:12:32 AM) SECOM Trust Systems CO LTD (6/25/2019 10:23:48 PM) SECOM Trust Systems CO LTD (9/30/2023 4:20:49 AM) Secretaria de Economia Mexico (5/8/2025 12:00:00 AM) Secrétariat Général de la Défense Nationale (10/17/2020 2:29:22 PM) SecureNet CA Class B (10/16/2009 9:59:00 AM) Serasa Certificate Authority I (11/21/2024 2:12:45 PM) Serasa Certificate Authority II (11/21/2024 12:44:48 PM) Serasa Certificate Authority III (11/21/2024 1:24:14 PM) SERVICIOS DE CERTIFICACION - A.N.C. (3/9/2009 9:08:07 PM) Sigen-CA (6/29/2021 9:57:46 PM) Sigov-CA (1/10/2021 2:22:52 PM) Skaitmeninio sertifikavimo centras (12/28/2026 12:05:04 PM) Skaitmeninio sertifikavimo centras (12/25/2026 12:08:26 PM) Skaitmeninio sertifikavimo centras (12/22/2026 12:11:30 PM) Sonera Class1 CA (4/6/2021 10:49:13 AM) Sonera Class2 CA (4/6/2021 7:29:40 AM) Spanish Property & Commerce Registry CA (4/27/2012 9:39:50 AM) Staat der Nederlanden Root CA (12/16/2015 9:15:38 AM) Staat der Nederlanden Root CA - G2 (3/25/2020 11:03:10 AM) Starfield Class 2 Certification Authority (6/29/2034 5:39:16 PM) Starfield Technologies (6/26/2019 12:19:54 AM) Starfield Technologies Inc. (12/31/2029 11:59:59 PM) StartCom Certification Authority (9/17/2036 7:46:36 PM) S-TRUST Authentication and Encryption Root CA 2005:PN (6/21/2030 11:59:59 PM) Swisscom Root CA 1 (8/18/2025 10:06:20 PM) SwissSign (10/25/2036 8:30:35 AM) SwissSign Platinum G2 Root CA (10/25/2036 8:36:00 AM) SwissSign Silver G2 Root CA (10/25/2036 8:32:46 AM) TC TrustCenter Class 1 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 2 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 3 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 3 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Class 4 CA (1/1/2011 11:59:59 AM) TC TrustCenter Class 4 CA II (12/31/2025 10:59:59 PM) TC TrustCenter Time Stamping CA (1/1/2011 11:59:59 AM) TC TrustCenter Universal CA I (12/31/2025 10:59:59 PM) TC TrustCenter Universal CA II (12/31/2030 10:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (7/16/2036 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte (12/31/2020 11:59:59 PM) thawte Primary Root CA - G2 (1/18/2038 11:59:59 PM) thawte Primary Root CA - G3 (12/1/2037 11:59:59 PM) Thawte Timestamping CA (12/31/2020 11:59:59 PM) Trustis EVS Root CA (1/9/2027 11:56:00 AM) Trustis FPS Root CA (1/21/2024 11:36:54 AM) Trustwave (1/1/2035 5:37:19 AM) Trustwave (12/31/2029 7:40:55 PM) Trustwave (12/31/2029 7:52:06 PM) TURKTRUST Elektronik Islem Hizmetleri (9/16/2015 12:13:05 PM) TURKTRUST Elektronik Islem Hizmetleri (3/22/2015 10:04:51 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (9/16/2015 10:07:57 AM) TURKTRUST Elektronik Sertifika Hizmet Saglayicisi (3/22/2015 10:27:17 AM) TÜRKTRUST Elektronik Sertifika Hizmet Saglayicisi (12/22/2017 6:37:19 PM) TW Government Root Certification Authority (12/5/2032 1:23:33 PM) TWCA Root Certification Authority 1 (12/31/2030 3:59:59 PM) TWCA Root Certification Authority 2 (12/31/2030 3:59:59 PM) U.S. Government FBCA (10/6/2010 6:53:56 PM) UCA Global Root (12/31/2037 12:00:00 AM) UCA Root (12/31/2029 12:00:00 AM) USERTrust (7/9/2019 6:40:36 PM) USERTrust (7/9/2019 5:36:58 PM) USERTrust (6/24/2019 7:06:30 PM) USERTrust (7/9/2019 6:19:22 PM) USERTrust (5/30/2020 10:48:38 AM) UTN - USERFirst-Network Applications (7/9/2019 6:57:49 PM) ValiCert Class 3 Policy Validation Authority (6/26/2019 12:22:33 AM) VAS Latvijas Pasts SSI(RCA) (9/13/2024 9:27:57 AM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (12/31/1999 9:37:48 AM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2020 11:59:59 PM) VeriSign (12/31/1999 9:35:58 AM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (1/7/2010 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (1/7/2004 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (7/16/2036 11:59:59 PM) VeriSign (8/1/2028 11:59:59 PM) VeriSign (5/18/2018 11:59:59 PM) VeriSign Class 3 Public Primary CA (8/1/2028 11:59:59 PM) VeriSign Class 3 Public Primary Certification Authority - G4 (1/18/2038 11:59:59 PM) VeriSign Time Stamping CA (1/7/2004 11:59:59 PM) VeriSign Universal Root Certification Authority (12/1/2037 11:59:59 PM) Visa eCommerce Root (6/24/2022 12:16:12 AM) Visa Information Delivery Root CA (6/29/2025 5:42:42 PM) VRK Gov. Root CA (12/18/2023 1:51:08 PM) Wells Fargo Root Certificate Authority (1/14/2021 4:41:28 PM) WellsSecure Public Certificate Authority (12/14/2022 12:07:54 AM) Xcert EZ by DST (7/11/2009 4:14:18 PM)

Read the article

Introducing… SharePress!

- by Bil Simser

For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

Search Results

Search found 8875 results on 355 pages for 'optimized solutions'.

Page 346/355 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353 | Next Page >

- by j_random_hacker

- by Septagram

- by helloworld

- by tolborg

- by Marc Vollmer

- by Mark Rushakoff

- by wdow88

- by sprugman

- by Phil Elm

- by Jordan Rynard

- by Rick Strahl

- by Martin Hinshelwood

- by Martin Hinshelwood

- by Wallym

- by rituchhibber

- by Stefan Krantz

- by Phil Factor

- by pinaldave

- by Max Arderius

- by Your DisplayName here!

- by Bil Simser

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353 | Next Page >