Search Results

Search found 29354 results on 1175 pages for 'scala 2 10'.

Page 346/1175 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• rsync does't work

  - by jspooner

  I set up a new ec2 ubuntu server and I'm unable to use rsync to push a file up. I can ssh to the machine with my keypair. I'm not sure why this looks like it works but finishes in half a second and there is nothing in /home/ubuntu on the server. ? ~ rsync -av -i ~/.ec2/my-keypair ~/Downloads/pushcom.2012-06-26T01-10-04.gz [email protected] building file list ... done >f..t.... gsg-keypair >f..t.... pushwoodcom.2012-06-26T01-10-04.gz sent 3624 bytes received 64 bytes 7376.00 bytes/sec total size is 3392 speedup is 0.92 I've tried 50 different ways of the rsync command but I can't get anything to work. Please help! Thanks

  Read the article

• ASA 5505 8.4 open ports for subnet

  - by fwrawx

  I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on Mac OS. I found good description here Permanent Static Route Mac OS X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• Excel wizardness needed - Group By, Sort, Count function help

  - by Chris

  Riddle me this: You have 3 part numbers with the same part name xyz, each with a quantity of 10 items. The items can be picked during the day or week, therefore changing the amount of items on hand. I know I need to use the group by, sort, count and perhaps sumif formulas to have a running count of the number of items on hand at the end of each day (which could be positive or negative). Help? it wont let me add an image because i'm a new user. 'Oops! Your edit couldn't be submitted because: * we're sorry, but as a spam prevention mechanism, new users aren't allowed to post images. Earn more than 10 reputation to post images. '

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• isolate web servers on intranet with dfl-800

  - by microchasm

  I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

• Is there a method to export the URLs of the open tabs of a Firefox window?

  - by hekevintran

  If I have a Firefox window open that contains 10 tabs, is there a way in Firefox or by a plug-in to get the URLs of those 10 tabs as a text file or some other format? Right now if I want to do this I need to copy the URL of tab A, paste it somewhere, move to tab B, and repeat. I could also bookmark all the tabs into a folder and export that, but that seems like such a hassle. If there is no such method, could someone point me to some documents that describe the basics of writing a Firefox plug-in. I am willing to write this myself if there is no "standard" way.

  Read the article

• tar incremental backup is backing everything up, every time

  - by Cyclic

  I made an incremental backup about 10 months ago (on Jan 27, 2013), creating a .snar metadata file. Now, when I try to make an incremental backup using tar --create --file=dropbox_incremental_1.tar --listed-incremental=dropbox_0.snar Dropbox the command just re-backs up everything. I'm not an expert at Unix timestamps, but I noticed that virtually all of my directory timestamps are way more recent than the last time they changed. For my actual files, they look like this: Access: 2013-03-12 19:04:51.000000000 -0500 Modify: 2012-09-30 15:10:47.000000000 -0500 Change: 2013-03-12 19:04:51.306209672 -0500 The 'Modify' timestamp seems correct, but the files were definitely not changed (at least not doing anything that I know of) at the time they say they were. These files still seem to go into the incremental archive. What's happening here? Is there a way to tell tar to look at the 'modify' timestamp? Isn't this what it's supposed to be doing?

  Read the article

• Confused with DKIM, SPF and Exim Configs

  - by 0pt1m1z3

  I've now spent 2 hours trying to figure out this issue and I am about to give up and go to bed. I've been having issues with Gmail rejecting emails from my VPS server because of false spam alerts (probably caused by lfd sending too many emails). So I changed my Exim config to send emails from a different IP (my VPS comes with 3) and that fixed the issue. I also enabled DKIM and SPF on my domains for added measure. But now, all my emails appear as ("From: Sender Name via server.domain1.com") where server.domain1.com is my VPS hostname. I previously had the same issue in Outlook and turning off "Set SMTP Sender: headers" solved that problem. But I believe adding the DKIM and SPF now makes Gmail add "via server.domain1.com" to my messages. How do I fix this? This is a typical header for a message (as it appears at gmail): Delivered-To: [email protected] Received: by 10.60.44.163 with SMTP id f3csp248622oem; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received: by 10.50.106.200 with SMTP id gw8mr452788igb.10.1333081398523; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Return-Path: <[email protected]> Received: from domain2.com ([X.X.X.X]) by mx.google.com with ESMTPS id y1si810998igb.3.2012.03.29.21.23.18 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) client-ip=X.X.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=server.domain1.com; s=default; h=Date:Message-Id:From:Content-type:MIME-Version:Subject:To; bh=wF8bBRgh01EYg4t5DAeVPv1Ps906UVIeRnQCb/HvSYw=; b=k/Pg7lnrO+Ud/z1mOTv+O/3DiJzzQgyBhfIizIaFHM8tF/eNJt5P2k+9yQB224sxYstZIWwVRBJmiqvcM1QhARv1HWqWma0crppZ3JOn+LRHANan634OBi+58SIRA+gu; Received: (Exim 4.77) id 1SDTVE-0005HA-9Y for [email protected]; Fri, 30 Mar 2012 00:31:56 -0400 To: [email protected] Subject: Password Reset Request MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 From: Sender Name <[email protected]> Message-Id: <[email protected]> Date: Fri, 30 Mar 2012 00:31:56 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - server.domain1.com X-AntiAbuse: Original Domain - domain2.com X-AntiAbuse: Originator/Caller UID/GID - [507 504] / [47 12] X-AntiAbuse: Sender Address Domain - server.domain1.com

  Read the article

• correct format for datetime appended to filename

  - by jhayes

  I'm trying to setup a batch file to execute a set of stored procs and dump the output to a timestamped text file. I'm having problems finding the correct format for the timestamp. Here is what I'm using osql.exe -S <server> -E -Q "EXEC <stored procedure> " -o "c:\filename_%date:~-0,10%_%time:~-0,10%.txt" The error I get is: Cannot open output file - x:\filename_Thu 06/25/_16:26:43.1.txt No such file or directory I can't find the documentation and I've played around with it but can't find the correct format.

  Read the article

• Labeling values in a GNUplot heatmap

  - by andremo

  I am trying to generate a heat map using gnu plot. set title "Heat Map" plot '-' matrix with image 10 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 0 30 40 50 60 70 80 90 100 0 0 40 50 60 70 80 90 100 0 0 0 50 60 70 80 90 100 0 0 0 0 60 70 80 90 100 0 0 0 0 0 70 80 90 100 0 0 0 0 0 0 80 90 100 0 0 0 0 0 0 0 90 100 0 0 0 0 0 0 0 0 100 0 0 0 0 0 0 0 0 0 e Along the axes I get values -2 0 2 4 6 8 10, and I would like to replace those with a custom string. I cannot find out how to do this.

  Read the article

• Backups of Exchange 2007 SP3 using VSS are abnormally large

  - by Stew

  I have recently implemented Veeam backup and recovery 6.0, and have noted when backing up my exchange server via incremental updates, it is transferring way more data than expected. Backup is incremental, and setup to use VSS. VSS is stable and healthy, according to vssadmin. Exchange 2007 SP3 running on Windows Server 2008 R2, just last weekend I installed the latest Rollup for Exchange. I thought the nightly incrementals were large, but perhaps my users really are sending that much mail so I tested taking one incremental backup, waiting 10 minutes and taking a second. The second incremental backup transfered 5.8GB of data. We as an organization are absolutely NOT putting 5.8GB of data on the mail server every 10 minutes. Are there any other veeam users who have seen something similar? Is my test faulted? Are there other considerations for VSS?

  Read the article

• Laptop loses signal from WiFi router, but mobile phone holds it fine

  - by Anton

  I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

  Read the article

• Solaris x86: Non working keys on keyboard (<, >, #, |)

  - by Thomas

  Hello everyone, I have a new installation of Solaris 10 10/09 on x86 hardware. The attached keyboard has a normal German layout. The system is configured accordingly by 'kbd -s'. The generic keys (letter, number, umlaut) work fine. Unfortunately some keys like <, , | or # do not. They produce no output on the text console at all. I tried PS/2 and USB keyboards. I cannot test it under X11 as it is currently not working. Thanks.

  Read the article

• Is it bad to have a very full hard drive on a high traffic database server?

  - by MikeN

  Running an Ubuntu server with MySQL for a high traffic production database server. Nothing else is running on the machine except the MySQL instance. We store daily database backups on the DB server, is there any performance hit or reason why we should keep the hard disk relatively empty? If the disk is filled up to 86%+ with the database and all of the backups, does it hurt performance at all? So would the DB server running with 86-90%+ full capacity perform less well in any way than the server running with only a 10% full disk? The total disk size on the server is over 1 TB so even 10% of the disk should be enough for basic O/S swapping and such.

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• Iptables: how do I LOG what's not being ACCEPTED and limit what gets logged?

  - by Kris

  How do I log what's not being accepted by the following rule: iptables -A OUTPUT -p icmp --icmp-type 3 -m -limit --limit 10/minute -j ACCEPT And how do I limit what's being logged because I don't want to log 1000s of pings? My first thought was: iptables -A OUTPUT -p icmp --icmp-type 3 -m -limit --limit 50/day -j LOG iptables -A OUTPUT -p icmp --icmp-type 3 -m -limit --limit 10/minute -j ACCEPT But that doesn't seem right to me. I think this limits the logging to 50/day but not necessarily what is not being accepted, or am I wrong?

  Read the article

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• Network switching issues with MacOS 10.7?

  - by Denis

  I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

  Read the article

• Set up Gmail with Google apps for own domain

  - by erdomester

  I rent a server from a German company. I have remote access to it as well as WHM and CPanel. I decided to use Google's mail servers for obvious reasons. I am not an admin just an average guy trying to set up what needs to be set up. The problem is I am unable to make the necessary settings. I watched Youtube tutorials, followed written ones as well as Google's help, but there is (at least) one serious problem with my domain settings. The domain console alwasy says Your MX records are incorrect When I check dappwall.com in mxtoolbox.com it says Pref Hostname IP Address TTL 10 mail.dappwall.com 46.4.88.247 24 hrs But this is not the host name. I checked WHM and my hostname is server1.dappwall.com. I can confirm it by typing the hostname command in putty. However, if I do an mx lookup at mxtoolbox.com on server1.dappwall.com or mail.dappwall.com I get Lookup failed after 1 name servers timed out or responded non-authoritatively I ran checks on the google apps toolbox on dappwall.com and two problems emerged: 1.No Google mail exchangers found. Relayhost configuration? 10 mail.dappwall.com In Google Apps > Settings for Gmail > Advanced settings it also says that my current MX records for dappwall.com is Priority Points to 10 MAIL.DAPPWALL.COM. So mail.dappwall.com again. I also have access to a robot provided by the company I rent the server from. Here I see this mail at two places but how should I (if it's necessary) modify this? I set Email routing to Automatically Detect Configuration. 2.There SHOULD be a valid SPF record. "v=spf1 include:_spf.google.com ~all" In the DNS Zone Editor I added this spf record: Name TTL Class Type Record dappwall.com. 1440 IN TXT v=spf1 include:_spf.google.com ~all In the cPanel Email Authentication page it says SPF: Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for dappwall.com. [?] Your current raw SPF record is : v=spf1 include:_spf.google.com ~all How can I confirm that my server is an authoritative nameserver for dappwall.com? In WHM Service Configuration Mailserver selection Dovecot was set but I disabled it (i don't know if that's ok). What am I missing here? Where is that mail.dappwall.com coming from?

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >