Search Results

Search found 12820 results on 513 pages for 'little devil'.

Page 347/513 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• /dev/input/uinput Device appears to be 'broken'

  - by Adam Luchjenbroers

  I'm trying to setup Pystromo so that I can remap the keys on my Belkin N52TE gamepad. Pystromo basically captures the key strokes and then outputs the remapped keystrokes to the uinput device. However, at the moment it simply swallows the input and outputs absolutely nothing. I've tracked the issue to something being wrong with my uinput device, with the smoking gun being: # ls -l /dev/input/uinput crw-rw---- 1 root plugdev 10, 223 Dec 31 2009 /dev/input/uinput # cat /dev/input/uinput cat: /dev/input/uinput: No such device The uinput module is loaded, and can be clearly seen via lsmod. Anyone seen this before, or can think of something worth attempting? Current Setup Gentoo Linux Kernel 2.6.32 (Gentoo Sources 2.6.32-r1) HP DV7 Laptop Output dmesg dmesg | grep uinput does nothing, and no new lines appear if I run modprobe -r uinput && modprobe uinput. Yet the uinput module can clearly be seen when running lsmod: # lsmod | grep uinput uinput 6200 0 lsusb # lsusb Bus 005 Device 003: ID 050d:0200 Belkin Components Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1532:0101 Razer USA, Ltd Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 5986:0143 Acer, Inc Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb -v PasteBin Update Hmm, updating evdev and hal seems to have partially fixed it. /dev/input/uinput still can't be accessed but Pystromo is now remapping keys successfully. I'm a little bit mystified about what's going on here, but it seems that my understanding of how all this works is flawed. Since I've posted a bounty, I'll leave this here for someone to post an explanation for how user-space input devices work under the hood.

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

  Read the article

• Fedora 12 on Vmware network disabled on restore

  - by Chaitanya

  I have a fedora 12 guest running on VMWare on windows 7. I use it mainly for the occasional linux dev. Whenever I restart the guest, networking works fine. But if I close the VMware player and save state, the next time I start the image, networking is disabled (red x on the network icon. message saying networking disabled). I can't seem to find a way to restore networking. I have to reboot the guest to get my network access back again. My Ubuntu image doesn't have this problem. I can close the player and when I re run the image, I can pick up where I left off, with all the open firefox windows and application windows as I left them. Fedora saves state, but doesn't seem to enable networking. There is a relevant warning I have seen "SELinux is preventing /sbin/ifconfig "read" access to/var/run/vmware-active-nics." But I am not sure how to solve it. I know fedora isn't officially supported by VMware, but it seems to be working fine for the most part and meeting my needs, except for this one little issue. Any help would be much appreciated.

  Read the article

• Recover NTFS data from a ZFS pool that was exposed as an iSCSI target

  - by David

  This was me being stupid and the data is by no means critical and is now a learning experience first, time saver second. I set up a 100GB iSCSI target via the bare bone instructions in napp-it. It's a volume LU. I then had my Windows 7 machine connect to the iSCSI target, formatted it to NTFS, and tested the performance of it with some large iso file transfers. I then unmapped the drive, reconnected to the target, and was forced to format to NTFS again. It was then I realized the files I had transferred only existed on the iSCSI target. I threw a little fit and then went about my business. When I was cleaning up my experiment I noticed in this screen: http://imgur.com/1xlcu.jpg That is my experimental target tank/iSCSI and it still has a lot of data in it. Assuming my isos are still in this pool how would I go about recovering them? While writing this I used GetDataBackup for NTFS from www.runtime.org. And while it found two previous NTFS partitions there was no data.

  Read the article

• Trying to delete directory with "rm -rf", but get message that it's not empty

  - by Ben Hocking

  I've tried deleting a directory using "rm -rf" and I'm getting the message "Directory not empty": Bens-MacBook-Pro:please benjaminhocking$ ls -lart empty_directory/ total 16 drwxr-xr-x 5 benjaminhocking staff 170 Aug 27 14:46 . drwxr-xr-x 3 benjaminhocking staff 102 Aug 27 15:28 .. Bens-MacBook-Pro:please benjaminhocking$ rm -rf empty_directory/ rm: empty_directory/: Directory not empty Bens-MacBook-Pro:please benjaminhocking$ rmdir empty_directory/ rmdir: empty_directory/: Directory not empty If I try the same thing using Finder (dragging the folder to the Trash), I get the message The operation can’t be completed because the item “empty_directory” is in use. I've tried doing xattr -d com.apple.quarantine, purely out of superstition, but it did no good. A probably important piece of context is that this directory was initially in a directory that should've been deleted by a "make clean" command I issued prior to Terminal locking up on me, after which a little over half of the other programs I had running also locked up, including Skype, and eventually the OS itself. I ended up having to reboot the computer by pressing and holding the power key. Edit to add: Another important piece of information I left off was that this was happening in an encrypted folder à la encfs. I was able to track down the corresponding folder in the encrypted side of things and delete it there. I still don't know why I couldn't do it from the decrypted side of things like I normally do. I'll leave this unanswered for now in case anyone has a good answer for that.

  Read the article

• Understanding NFS4 exports and pseudofilesystem

  - by Trevor Harrison

  I think I understand the way pre-NFS4 exports work, specifically the namespace of the exported point. (ie. export /mnt/blah on server, use mount server:/mnt/blah /my/mnt/point on client) However, I'm having a hard time wrapping my head around NFS4 exports. What I've been able to gather so far is that you export a 'root' by marking it with fsid=0, which you then import on the client side by referring to it as '/'. (ie. exportfs -o fsid=0 /mnt/blah on server, mount server:/ on client) However, after that, it gets a little weird. From my playing around, it seems I can't export anything else thats not under /mnt/blah. For example, exportfs /home/user1 fails when trying to mount from the client unless /mnt/blah/home/user1 exists on the server. If this is the case, what is the difference between exportfs /mnt/blah/subdir1 on server and mount server:/subdir1 on client and just skipping the exportfs and mounting whatever subdir of /mnt/blah you want? Why would you need to export anything other than the root? Its all in the same namespace anyway.

  Read the article

• Per connection bandwidth limit

  - by Kyr

  Apparently, our server box running Windows Server 2008 R2 has a per connection bandwidth limit of 0.2 MB/s. Meaning, while one TCP connection can pull at max 0.2 MB/s, 60 parallel connections can pull 12 MB/s. We first noticed this when trying to checkout large SVN repository from this server. I used a simple Java application to test this, transferring data from server to workstation using variable number of threads (one connection per thread). Server part of the application simply writes 1 MB memory buffer to socket 100 times, so there is no disk involvement. Each connection topped at 0.2 MB/s. Same per connection limit was for only one as was for 60 parallel connections. The problem is that I have no idea from where this limit comes from. I have very little experience administrating Windows Server, so I was mostly trying to find something by googling. I have checked the following: Local Computer Policy QoS Packet Scheduler Limit reservable bandwidth: it's Not configured; Group Policy Management Console: we have two GOPs, but neiher has any Policy-based QoS defined; There isn't any bandwidth limiter program installed, as far as I can tell. We're using standard Windows Firewall. I can update this question with any additional information if needed.

  Read the article

• Sending Mail from Web App to Google Apps won't work - internal routing? VPS

  - by Charlino

  I've got a web application, www.mysuperwebapp.com, which sends out emails for various reasons - the contact us page is a good example. I am using google apps on the domain and I've setup a google apps group, Support ([email protected]), which I want the emails from the contact us page to go to. But the emails don't seem to be sending... I thought it could be that the groups security is a little tighter than normal email, so I change the contact us email to go to [email protected] - but they still didn't appear. So I'm guessing that it has something to do with internal routing and the messages aren't leaving the server/network at all. Eg Sending an email from the mysuperwebapp.com computer to a mysuperwebapp.com email address. I put an entry into the hosts file for 123.123.123.123 mysuperwebapp.com but that doesn't seem to have helped. Also, there doesn't seem to be anything of interest in the event log. What do I need to do? Or what do I need to get my VPS hoster to do? TIA, Charles Ps. The VPS is a Windows 2008 box with IIS7 and the default SMTP (IIS6?) server. The web app is ASP.NET MVC - not that that should matter.

  Read the article

• How can I uninstall Broadcom Bluetooth software that won't disappear in Windows XP?

  - by T. Webster

  My situation is similar to this question for Windows 7, except my OS is Windows XP SP3. I have recently realized I made the mistake of buying a Bluetooth adapter and installing the Broadcom/Widcomm Bluetooth stack driver software. Now that I know that the software is no good, I want to uninstall it. Then I'll install the Toshiba stack for the Cirago adapter. Right now, when I double-click on the setup.exe file that came with the Cirago driver, nothing happens (it doesn't start setup). I've attempted to uninstall all Bluetooth driver software in Device Manager, and I don't see any remnants of any Bluetooth drivers there. But I do see that the little Bluetooth icon still persists: I don't see anything about Bluetooth, Broadcom, or Widcomm in Add/Remove Programs. I don't see any folder names Broadcom or Widcomm in Program Files folder, either. But I do see that Broadcom does show up in the registry with respect to Bluetooth, as shown here. I also renamed every file in C:\Windows\inf that starts with "bth" so that it ends with ".old". What should I do now to completely wipe this persistent Broadcom Bluetooth software off my computer?

  Read the article

• FTP FileWatcher

  - by Meiscooldude

  So, I am in this little predicament where I am stuck watching a few ftp folders to see if they have new files added to them. If they do, it needs to throw an event with the file name. Thereby telling something else to download that file. This is a pretty simple object to make, I was just curious if anyone knew how expensive this operation would be? I plan on using the command NLIST because I don't need file size information, and there will be no sub-directories in the folder. Each file in the folder will have exactly 25 characters in its name. There could be anywhere from 10 to 'maybe' a couple thousand (max around 2000) files per folder (usually on the lower end, 100-300, but currently growing). The files are anywhere from 250kb to a very VERY unlikely 10mb (usually within the 250kb to 4mb range). There possibly could be up to a few hundred folders (in which case I could change the watch frequency depending on number of folders), but currently there are only a few (6-10ish). There also would be multiple logins for the ftp server, different logins would have access to different folders. I am not asking for an implementation, just if anyone has some first or second hand knowledge about FTP, how could this affect my network. I am not opposed to putting in file retention times or change the frequency in which I check for new files.

  Read the article

• SSH client not showing prompt after successful login

  - by user431949

  I'm having problems with my SSH client on Ubuntu 10.10. When I switch on my computer and open a Terminal and execute the command ssh user@host, it gives me a password prompt after which I enter the right password, I then get a prompt to execute my commands on the remote computer. Now the problem is, after a little while (probably around 10 minutes), the terminal window stops accepting commands (No matter what I type, nothing shows). Once this happens, I close the Terminal window and try to start all over again by opening another Terminal window. But this time around, after entering the right password, I don't get a welcome message or prompt. The cursor just keeps blinking on a new line. I ran the ssh command with -v parameter and the message I get after a successful login is: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_GB.utf8 Still the cursor keeps blinking on a new line without a prompt. However, Putty SSH client works perfectly on the same machine. Thank you very much for your time. Your help would be greating appreciated.

  Read the article

• Virus ridden computer freezes on startup - can't access safe mode

  - by Eric

  Someone whom I love but who cannot be trusted with a live internet connection downloaded a particularly nasty virus that in turn downloaded a variety of unknown other viruses onto my home computer. The computer now freezes completely a few seconds after reaching the desktop and is unresponsive to any keyboard or mouse command. There are videos of my little kid on this hard drive that are not backed up and that I cannot bear to lose. But if I could get in there long enough to copy them off to an external drive I would have no problem doing a clean windows install to fix the problem; everything else is backed up online but the videos were too large. Normally I would start by going into safe mode but I have a large Dell monitor that doesn't show anything until the welcome screen appears. I think that I have gotten into the setup screen once or twice by mashing keys before I can see anything, but this monitor doesn't support that so I can't see what I'm doing to get it to boot from CD or anything else. I'm at my wits end. Any advice?

  Read the article

• Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

  - by Dave

  Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

  Read the article

• Ubuntu VM "read only file system" fix?

  - by David

  I was going to install VMWare tools on an Ubuntu server Virtual Machine, but I ran into the issue of not being able to create a cdrom directory in the /mnt directory. I then tested to see if it was just a permissions issue, but I couldn't even create a folder in the home directory. It continues to state that it is a read only file system. I know a little about Linux, and I'm not comfortable with it yet. Any advice would be much appreciated. Requested Information from a comment: username@servername:~$ mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type tmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) For sure root output. root@server01:~# mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type tmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)

  Read the article

• Scheduling Automatic Backups for Virtual Private Web Server running CENTOS 6.3 and WHM

  - by Oliver Farrell

  I'm pretty new to administering my own VPS - but thus far am finding it quite a compelling experience. There's something quite refreshing about having complete control over everything it does. One thing that I would like to look at is a suitable backup solution (a few times a day). My current setup is as follows: I'm running a CENTOS 6.3 VPS with a single 25GB hard drive solely for the purpose of hosting websites. I'm using WHM & cPanel for administering them. I now plan on adding an additional hard disk and hooking it up to my VPS. What I'm not sure about is how I get the two disks talking and get the backup process going. I'm not a seasons SSH-er so don't really know where to start. I'm hosting with Serverlove (one of the best hosting providers I've used) and am provided with a number of unique identifiers for each hard disk so I imagine these may play a part in linking them together. I appreciate that this is a little vague (I'm clutching at straws) but any assistance is very much appreciated.

  Read the article

• backup of TFS with DPM 2007 - different backup times

  - by user46516

  I have DPM set up to back up my TFS server every 30 minutes, the reason being it's a way better interface than the quirky SQL backup interface. I also do a full backup nightly using an SQL maintenance job. My thinking is I would use DPM to restore my databases in case of losing my database and the nightly full backup would be a "just in case" the DPM restore doesn't work. I was thinking a little harder about this set up today and started to think about the fact that the DPM backup of the individual databases happens at different 30 min windows.. i.e. one happens at 13h30, another at 13h34 etc. Would this difference in time be a problem when it comes to restoring the TFS server? If I restore the databases and they are from different times, will this create corruption with pointers in one database pointing to missing items in the other database.. do the databases even rely on each other or are they completely interdependant. Lastly, how would SQL (log) backup cope with this?

  Read the article

• Can I use CNAME with ip address? Why If works (sometimes)?

  - by Maciek Sawicki

  I believe that the easiest answer for the first question is "No, You have "A" for this", but I accidentally setup some subdomain using CNAME pointing to ip address and it worked on few computers in my office. I wonder how it was possible? Now, when I'm checking it from home I have following error: beast:~ viroos$ host somesubdomain.somedomain.com Host somesubdomain.somedomain.com not found: 3(NXDOMAIN) I'm 100% it used to work at my office (currently it looks like it doesn't, but I'm checking it on different machine). Therefore I'm not 100% if it worked due to some special network setup or because I tested it just after adding DNS entry. I know this story sounds, a little crazy/incredibly, but can someone help me solve this puzzle. //edit: I'm adding dig output ; <<>> DiG 9.6-ESV-R4-P3 <<>> somesubdomain.somedomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 60224 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;somesubdomain.somedomain.com. IN A ;; ANSWER SECTION: somesubdomain.somedomain.com. 67 IN CNAME xxx.xxx.xxx.xx1. ;; AUTHORITY SECTION: . 1800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012040901 1800 900 604800 86400 ;; Query time: 72 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Apr 10 00:11:01 2012 ;; MSG SIZE rcvd: 136

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Software way to cool down an old MacBook Pro

  - by notMacBookProSuperUser

  Hi all, First a little background: I've got lots of computers, including Linux PCs and two MacBook Pro (and a MacMini). My concern is with my 'old' MacBookPro (Core Duo). It really does overheat. Warranty is long void. Years ago (I'd say 2.5 years ago or so) one day it overheated so bad that the battery inflated due to the heat. I got a new battery for free but it's still getting incredibly hot (much other than any other computer I've got: my newer Core 2 Duo MacBook Pro doesn't get nearly as hot as the old one. It s really a pain because I use my old MBP when I m in front of TV, having it on my lap, and it can really become unbearable. I don't want to open that old MBP. On Linux I can force a new CPU 'governor' that decides how the CPU is allowed to operate: it can be 'on demand', 'always max speed', 'always speed x', etc. Does the same exist under MacOS X? Is there a way, say if a 1.86 Ghz Core Duo can run at 1.6 Ghz, to ask MacOS X: "never run this CPU above 1.6 Ghz" ?

  Read the article

• Scriptable BitTorrent clients?

  - by James McMahon

  In an effort further automate all the little computer house keeping tasks that can waste my time I am looking into BitTorrent clients that have the ability to script common tasks. I've done some Googling and it looks like Transmission might have some of said such capabilities, but there site wasn't very clear on the details. Things I am looking to do; Prioritize and label torrents based on trackers Set seed length based on trackers and filesize Set additional seed time when a torrent's seed time expires based on a number of factors, like time spent seeding, remaining disk space and ratio. Move torrents to appropriate places post seeding based on labels and tracker Basically, while I could Python or Bash script things like moving torrents around and other simple actions, I need away to talk to the client to figure out things like the torrent seed time, tracker, labels, filesize, etc. Is there any client out there that would allow me to all or a subset these actions? I have access to Linux, Mac and Windows and am not tied to any particular torrent client. I am a programmer so I have no problems writing scripts, but examples of torrent scripting would also be helpful.

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• Setting Outlook Web Access as default mail client in Firefox

  - by Barton Chittenden

  The company that I work for is nice enough to let me use Linux for work, but they use Outlook. I've been using Outlook Web Access (OWA) as my mail client, which is more or less acceptable. The only problem is that whenever I click on a mailto link or use the "Send Link" menu option in firefox, I'm prompted to use evolution. Since connecting to an exchange server through evolution seems to be sketchy at best, I would like to set OWA as my default mail client. I'm using Firefox 3.6.13 Here's what I've found so far: Default mail client can be found at Edit Menu -> Preferences -> Applications Tab -> mailto When I click on the drop down menu, one of the options is "Application Details" This shows two options by default: Google Yahoo! Mail Each of these shows how to launch that service. For Gmail: https://mail.google.com/mail/?extsrc=mailto&url=%s For Yahoo!: http://compose.mail.yahoo.com/?To=%s I presume that Outlook Web Access has something similar. Based on the googling that I've done so far, I think that this should look something like this: https://<server name>/owa/?cmd=compose... A little experimentation on my part shows that the following will compose a message: https://<email server>/owa/?ae=Item&a=New&t=IPM.Note but I still don't know how to specify recipient, subject or body of the email to be composed... What I want to know is a) does anyone know the URL parameters to compose a mailto in Outlook Web Access, including subject, recipient and body? else b) can someone give me a decent pointer for where to get this information?

  Read the article

• DAS vs SAN storage for serving 2 to 4 nodes

  - by Luke404

  We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

  Read the article

• can't connect to vsftpd from outside network

  - by rick

  i know this has been asked many times before, but nothing seems to resolve my issue. i have vsftpd running on ubuntu 10.04. i can connect with ftp localhost on the machine. i can connect from another machine in my network. i just cannot connect from outside. the machine is behind an airport extreme managed by airport utility on a mac. 21 is open as per nmap: macmini:~$ nmap localhost Starting Nmap 5.21 ( http://nmap.org ) at 2011-04-10 23:49 EDT Nmap scan report for localhost (127.0.0.1) Host is up (0.00045s latency). Hostname localhost resolves to 2 IPs. Only scanned 127.0.0.1 rDNS record for 127.0.0.1: localhost.localdomain Not shown: 997 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 631/tcp open ipp netstat says 21 is listening: macmini:~$ netstat -lep --tcp | grep ftp (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 *:ftp *:* LISTEN iptables: macmini:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination when i try to connect from my external IP (or a dyndns name which resolves there) it times out. ("control connection timed out") as i know very little about networking, i feel like something may jump out as clearly wrong?

  Read the article

• How is a subdomain passed to the webserver?

  - by Joshua Frank

  I know that dns resolves an address like example.com to an IP address like 11.22.33.44, but I'm a little confused about how subdomains are resolved, so that when you type http://subdomain.example.com, what actually gets passed to the server at 11.22.33.44? In other words, example.com = 11.22.33.44, but subdomain.example.com/path = ??? Are "subdomain" and "path" passed as http headers, or mapped in the url in some way, or what? Thanks in advance. Edit: If I'm understanding correctly, BloodPhilia says that subdomain.example.com actually is a different domain that in principle could resolve to a totally different IP. But if that's so, then what about hosts that have huge numbers of (what look like) subdomains, but which actually map to some path on the site. For instance, blogspot hosts millions of blogs, and they all look like this: aaa.blogspot.com bbb.blogspot.com ...millions more... yyy.blogspot.com zzz.blogspot.com Those are clearly not subdomains with their own IP's, but rather some mapping like aaa.blogspot.com -- www.blogspot.com/aaa, but how is this accomplished? What actually gets passed to the web server at blogspot.com?

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >