Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 347/527 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• How can I fix my corrupted RAID1 ext4 partition on a Synology DS212 NAS?

  - by Neil

  I have two identical 3 TB disks that were in a RAID1 array, where one disk crashed. I replaced the failed disk, but not after the RAID partitions got messed up. I need to figure out how to restore the RAID array and get at my ext4 partition. Here are the properties of the surviving disk: # fdisk -l /dev/sda fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee EFI GPT # parted /dev/sda print Model: ATA ST3000DM001-9YN1 (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 131kB 2550MB 2550MB ext4 raid 2 2550MB 4698MB 2147MB linux-swap(v1) raid 5 4840MB 3001GB 2996GB raid I replaced the failed drive, and cloned the surviving drive to it so I have something to work with. I cloned the drives with dd if=/dev/sdb of=/dev/sda conv=noerror bs=64M, and now /dev/sda and /dev/sdb are identical. Here is the RAID information: # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md1 : active raid1 sdb2[1] 2097088 blocks [2/1] [_U] md0 : active raid1 sdb1[1] 2490176 blocks [2/1] [_U] unused devices: <none> It seems that md2 is missing. Here is what testdisk 6.14-WIP finds: Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Current partition structure: Partition Start End Size in sectors 1 P Linux Raid 256 4980735 4980480 [md0] 2 P Linux Raid 4980736 9175039 4194304 [md1] Invalid RAID superblock 5 P Linux Raid 9453280 5860519007 5851065728 5 P Linux Raid 9453280 5860519007 5851065728 # After a quick search Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Partition Start End Size in sectors D MS Data 256 4980607 4980352 [1.41.12-2197] D Linux Raid 256 4980735 4980480 [md0] D Linux Swap 4980736 9174895 4194160 D Linux Raid 4980736 9175039 4194304 [md1] >P MS Data 9481056 5858437983 5848956928 [1.41.12-2228] And listing the files on the last partition in the list shows all of my files intact. What should I do?

  Read the article

• mdadm superblock hiding/shadowing partition

  - by Kjell Andreassen

  Short version: Is it safe to do mdadm --zero-superblock /dev/sdd on a disk with a partition (dev/sdd1), filesystem and data? Will the partition be mountable and the data still there? Longer version: I used to have a raid6 array but decided to dismantle it. The disks from the array are now used as non-raid disks. The superblocks were cleared: sudo mdadm --zero-superblock /dev/sdd The disks were repartitioned with fdisk and filesystems created with mfks.ext4. All disks where mounted and everything worked fine. Today, a couple of weeks later, one of the disks is failing to be recognized when trying to mount it, or rather the single partition on it. sudo mount /dev/sdd1 /mnt/tmp mount: special device /dev/sdd1 does not exist fdisk claims there to be a partition on it: sudo fdisk -l /dev/sdd Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb06f6341 Device Boot Start End Blocks Id System /dev/sdd1 1 243201 1953512001 83 Linux Of course mount is right, the device /dev/sdd1 is not there, I'm guessing udev did not create it because of the mdadm data still on it: sudo mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : b164e513:c0584be1:3cc53326:48691084 Name : pringle:0 (local to host pringle) Creation Time : Sat Jun 16 21:37:14 2012 Raid Level : raid6 Raid Devices : 6 Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB) Array Size : 15628107776 (7452.06 GiB 8001.59 GB) Used Dev Size : 3907026944 (1863.02 GiB 2000.40 GB) Data Offset : 2048 sectors Super Offset : 8 sectors State : clean Device UUID : 3ccaeb5b:843531e4:87bf1224:382c16e2 Update Time : Sun Aug 12 22:20:39 2012 Checksum : 4c329db0 - correct Events : 1238535 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AA.AAA ('A' == active, '.' == missing) My mdadm --zero-superblock apparently didn't work. Can I safely try it again without losing data? If not, are there any suggestion on what do to? Not starting mdadm at all on boot might be a (somewhat unsatisfactory) solution.

  Read the article

• Mod_Proxy_AJP set up issues

  - by TripWired

  I'm trying to set up Tomcat behind Apache using mod_proxy_ajp. After tons of messing around with the configs I am stuck at a 403 page when trying to access tomcat. I had a 404 before but apparently something I changed along the way fixed that. I'm not sure which setting to change at this point. Could anyone look over the configs I have and see if anything is missing. httpd.conf <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Deny from all Allow from localhost </Proxy> proxy_ajp.conf LoadModule proxy_ajp_module modules/mod_proxy_ajp.so # # When loaded, the mod_proxy_ajp module adds support for # proxying to an AJP/1.3 backend server (such as Tomcat). # To proxy to an AJP backend, use the "ajp://" URI scheme; # Tomcat is configured to listen on port 8009 for AJP requests # by default. # # # Uncomment the following lines to serve the ROOT webapp # under the /tomcat/ location, and the jsp-examples webapp # under the /examples/ location. # ProxyPass /tomcat ajp://127.0.0.1:8009/ ProxyPassReverse /tomcat ajp://127.0.0.1:8009/ ProxyPass /examples/ ajp://localhost:8009/jsp-examples/

  Read the article

• Move database from SQL Server 2012 to 2008

  - by Rich

  I have a database on a SQL Sever 2012 instance which I would like to copy to a 2008 server. The 2008 server cannot restore backups created by a 2012 server (I have tried). I cannot find any options in 2012 to create a 2008 compatible backup. Am I missing something? Is there an easy way to export the schema and data to a version-agnostic format which I can then import into 2008? The database does not use any 2012 specific features. It contains tables, data and stored procedures. Here is what I have tried so far: I tried "tasks" - "generate scripts" on the 2012 server, and I was able to generate the schema (including stored procedures) as a sql script. This didn't include any of the data, though. After creating that schema on my 2008 machine, I was able to open the "Export Data" wizard on the 2012 machine, and after configuring the 2012 as source machine and the 2008 as target machine, I was presented with a list of tables which I could copy. I selected all my tables (300+), and clicked through the wizard. Unfortunately it spends ages generating its scripts, then fails with errors like "Failure inserting into the read-only column 'FOO_ID'". I also tried the "Copy Database Wizard", which claimed to be able to copy "from 2000 or later to 2005 or later". It has two modes: 1) "detach and attach", which failed with error: Message: Index was outside the bounds of the array. StackTrace: at Microsoft.SqlServer.Management.Smo.PropertyBag.SetValue(Int32 index, Object value) ... at Microsoft.SqlServer.Management.Smo.DataFile.get_FileName() 2) SQL Management Object Method which failed with error "Cannot read property IsFileStream.This property is not available on SQL Server 7.0."

  Read the article

• chmod -R 777 / on ubuntu - numerous problems

  - by ncatnow

  A client has accidentally given the entire filesystem full permissions on their ubuntu 10.04 box. chmod -R 777 httpdocs/cd / As you can see they attempted to cd to the root, and instead gave chmod a fun parameter to play with. First sign of the problem was inability to use 'su', giving an authentication error. sudo also complained of a missing setuid bit. This was fixed by logging in as root from the machine itself, and running chmod +s /usr/bin/sudo. I can now sudo su and do what I need to as root. su still gives an authentication failure. I followed the advice here: http://swiss.ubuntuforums.org/showthread.php?t=1180661&page=2 chmod 0755 / chmod 0755 /* chmod 1777 /tmp chmod 0750 /root chmod 0700 /lost+found I then tried to reset root password. I still cannot su to become root, or su root. The system seems to be running fine. Are there any suggestions for getting su to work once again? Where can I look for more problems?

  Read the article

• Sun-JRE on CentOS-4.8 RPM error: post-install scriptlet failed, exit status 5

  - by Emyr

  I have a server with CentOS 4.8 installed. The provided is rubbish, but there's only a few months left, and they're busy being sued by Chase bank, so I doubt I can get CentOS 5. I wiped the server clean using Virtuozzo, and found that the default image is VERY empty. I even had to install yum myself. I've reached the point where I want to install TomCat. I downloaded the Sun JRE as a .rpm.bin file, did chmod a+x and ran it. That produced a .rpm file, which I tried installing: [root@host java]# rpm -Uvh jre-6u20-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... jsse.jar... charsets.jar... localedata.jar... plugin.jar... javaws.jar... deploy.jar... error: %post(jre-1.6.0_20-fcs.i586) scriptlet failed, exit status 5 [root@host java]# rpm -evv jre-6u20-linux-i586.rpm D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: opening db index /var/lib/rpm/Name rdonly mode=0x0 error: package jre-6u20-linux-i586.rpm is not installed D: closed db index /var/lib/rpm/Name D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages [root@host java]# rpm -qi --scripts jre-6u20-linux-i586.rpm package jre-6u20-linux-i586.rpm is not installed [root@host java]# I couldn't find any results on Google for any parts of that error message, and I have very little experience of rpm (I usually use Debian). Is this a broken package, or am I missing something or some setting?

  Read the article

• ZFS - zpool ARC cache plus L2ARC benchmarking

  - by jemmille

  I have been doing lots of I/O testing on a ZFS system I will eventually use to serve virtual machines. I thought I would try adding SSD's for use as cache to see how much faster I can get the read speed. I also have 24GB of RAM in the machine that acts as ARC. vol0 is 6.4TB and the cache disks are 60GB SSD's. The zvol is as follows: pool: vol0 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM vol0 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 cache c3t5001517958D80533d0 ONLINE 0 0 0 c3t5001517959092566d0 ONLINE 0 0 0 The issue is I'm not seeing any difference with the SSD's installed. I've tried bonnie++ benchmarks and some simple dd commands to write a file then read the file. I have run benchmarks before and after adding the SSD's. I've ensured the file sizes are at least double my RAM so there is no way it can all get cached locally. Am I missing something here? When am I going to see benefits of having all that cache? Am I simply not under these circumstances? Are the benchmark programs not good for testing the effect of cache because of the the way (and what) it writes and reads?

  Read the article

• Setting up ProxyPass for a Virtualmin virtual server

  - by Andy Ibanez

  I am trying to set up my web server so that I can server multiple Ghost.org blogs. I am stuck in one crucial step. To be honest, my knowledge in servers is not so big, so I request your help to do this. Basically, a tutorial I'm reading suggests I set up a VirtualHost in this way: NameVirtualHost *:80 <VirtualHost *:80> ServerName your-url.com ServerAlias www.your-url.com ProxyRequests off ProxyPass / http://127.0.0.1:2368/ ProxyPassReverse / http:/127.0.0.1:2368/ </VirtualHost> So I have gone to the Virtual site on Virtualmin to try to add everything as is. Services Configure Website Edit Directives The problem is, the previous page (Services Configure website) says I can't edit the port: This Apache virtual host belongs to the Virtualmin server linguist.andyibanez.com, so the address, port, base directory and hostname cannot be changed here. And whenever I try to add the ProxyRequests off (the other two can be added fine) directive in Edit Directives manually, I'm simply told that the directive can't be there. So what is the right way to "add" the last three directives in the VirtualHost above to my sub server? Maybe I'm missing a menu item that will help me with this? I request your help as I have looked for a while, Google keeps thinking I want to serve Webmin via Apache when I google "Set up Virtualmin proxypass", and I have no clue what to do.

  Read the article

• What happens to Google contacts in the People app in Windows 8

  - by Klas Mellbourn

  In the People tile in Windows 8, you can connect to your different accounts, e.g. LinkedIn, Facebook, Google contacts. I have a lot of contact information in Google Contacts that I have carefully curated. I also have Facebook and LinkedIn contacts. I have already connected Facebook and LinkedIn contacts to the People app, and it seems to work ok. If I connect my Google Contacts to the People app too, what exactly will happen to the Google contacts? Will my Google contacts be modified in any way by the People app? Merged? Synced? (I understand that they will look merged in the People app, but I am wondering what will happen to the actual Google contacts, which I often use outside the People app) For instance: If a contact is in Facebook but is missing from Google Contacts, will it be created in Google contacts? If there is a picture for a person in both Facebook and Google Contacts, will the Google Contacts picture be overwritten? If I add a field, such as "Comments" to a contact in the People app, will that comment be written to the comment field for that contact in Google Contacts?

  Read the article

• Kerberos & signle-sign-on for website

  - by Dylan Klomparens

  I have a website running on a Linux computer using Apache. I've employed mod_auth_kerb for single-sign-on Kerberos authentication against a Windows Active Directory server. In order for Kerberos to work correctly, I've created a service account in Active Directory called dummy. I've generated a keytab for the Linux web server using ktpass.exe on the Windows AD server using this command: ktpass /out C:\krb5.keytab /princ HTTP/[email protected] /mapuser [email protected] /crypto RC4-HMAC-NT /ptype KRB5_NT_PRINCIPAL /pass xxxxxxxxx I can successfully get a ticket from the Linux web server using this command: kinit -k -t /path/to/keytab HTTP/[email protected] ... and view the ticket with klist. I have also configured my web server with these Kerberos properties: <Directory /> AuthType Kerberos AuthName "Example.com Kerberos domain" KrbMethodK5Passwd Off KrbAuthRealms EXAMPLE.COM KrbServiceName HTTP/[email protected] Krb5KeyTab /path/to/keytab Require valid-user SSLRequireSSL <Files wsgi.py> Order deny,allow Allow from all </Files> </Directory> However, when I attempt to log in to the website (from another Desktop with username 'Jeff') my Kerberos credentials are not automatically accepted by the web server. It should grant me access immediately after that, but it does not. The only information I get from the mod_auth_kerb logs is: kerb_authenticate_user entered with user (NULL) and auth_type Kerberos However, more information is revealed when I change the mod_auth_kerb setting KrbMethodK5Passwd to On: [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1939): [client xxx.xxx.xxx.xxx] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1031): [client xxx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(735): [client xxx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(645): [client xxx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1110): [client xxx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=0 [email protected] authtype=Basic What am I missing? I've studied a lot of online tutorials and cannot find a reason why the Kerberos credentials are not allowing access.

  Read the article

• Tomcat 7 on Ubuntu 12.04 startup issues

  - by Nico Huysamen

  I am having trouble getting tomcat 7 to start up on my new VPS. I am really scratching my head since I have done this often. So I'm thinking it might be the VPS. I just got a new VPS from CINFU. After a clean install of Ubuntu 12.04 32bit, I install openjdk-6-jdk, update JAVA_HOME to point to: /usr/lib/jvm/java-1.6.0-openjdk-i386 and JRE_HOME to: /usr/lib/jvm/java-1.6.0-openjdk-i386/jre But when I try to run: ./catalina.sh run it simply outputs: Using CATALINA_BASE: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_HOME: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_TMPDIR: /opt/tomcat/apache-tomcat-7.0.29/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-i386 Using CLASSPATH: /opt/tomcat/apache-tomcat-7.0.29/bin/bootstrap.jar:/opt/tomcat/apache-tomcat-7.0.29/bin/tomcat-juli.jar and stops. It just hangs there doing nothing. If I run ./startup.sh && tail -f ../logs/catalina.out it gets to: Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["ajp-bio-8009"] Aug 24, 2012 8:38:36 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 495 ms Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.29 but I am unable to access anything. The request just hangs. I have also tried a few other things like explicitly exporting the paths etc in catalina.sh, and running ./startup.sh rather than catalina.sh, but the furthest I have gotten is that it finishes deploying all the WARs (the default ones that comes with tomcat like the host-manager etc), but then it hangs: Aug 24, 2012 8:47:30 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] and does nothing. Anyone have any pointers that might help? As I said, I must really be missing something stupid since this has worked on all other VPSs that we have. UPDATE I figured out that the problem is actually the fact that they use OpnVZ virtualization and that there are known compatibility problems with Java.

  Read the article

• Cacti not working for SNMP data sources

  - by lorenzo-s

  I installed packages cacti and snmpd on a Debian server. I'm able to display common graphs in Cacti (such as memory usage, load average, logged in users, etc) using the data templates listed as Unix. Now I want to replace these graphs with new ones using SNMP data sources, because I see there is also CPU usage and because it's not excluded I have to manage multiple hosts in the future. So, I installed snmpd on the machine and left the snmpd.conf as it is. In Cacti, I created three new data sources from SNMP templates for 127.0.0.1 host: ucd/net - CPU Usage - Nice ucd/net - CPU Usage - System ucd/net - CPU Usage - User Then I created a new graph from template ucd/net - CPU Usage, and select the three data sources in the Graph Item Fields section. Graph is now enabled and running, but empty. No data have been collected. Under Console - Devices my SNMP host is listed as up and running: System:Linux ip-xx-xx-xxx-xxx 3.2.0-23-virtual #36-Ubuntu SMP Tue Apr 10 22:29:03 UTC 2012 x86_64 Uptime: 929267 (0 days, 2 hours, 34 minutes) Hostname: ip-xx-xx-xxx-xxx Location: Sitting on the Dock of the Bay Contact: Me [email protected] In SNMP Options I left all as it is: SNMP Version: Version 1 SNMP Community: public SNMP Timeout: 500 ms Maximum OID's Per Get Request: 10 In Console - Utilities - Cacti Log I have multiple warning (two for each data source) every 5 minutes: 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[2] DS[18] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.15.0' 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[1] DS[9] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.11.52.0' 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] Host[2] DS[19] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.6.0' [...] I have the feeling I'm missing something, but I cannot get it...

  Read the article

• Could not continue scan with NOLOCK due to data movement during installation

  - by dbdev1

  Hi, I am running Windows Server 2008 Standard Edition R2 x64 and I installed SQL Server 2008 Developer Edition. All of the preliminary checks run fine (Apart from a warning about Windows Firewall and opening ports which is unrelated to this and shouldn't be an issue - I can open those ports). Half way through the actual installation, I get a popup with this error: Could not continue scan with NOLOCK due to data movement. The installation still runs to completion when I press ok. However, at the end, it states that the following services "failed": database engine services sql server replication full-text search reporting services How do I know if this actually means that anything from my installation (which is on a clean Windows Server setup - nothing else on there, no previous SQL Servers, no upgrades, etc) is missing? I know from my programming experience that locks are for concurrency control and the Microsoft help on this issue points to changing my query's lock/transactions in a certain way to fix the issue. But I am not touching any queries? Also, now that I have installed the app, when I login, I keep getting this message: TITLE: Connect to Server Cannot connect to MSSQLSERVER. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 67) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=67&LinkId=20476 BUTTONS: OK I went into the Configuration Manager and enabled named pipes and restarted the service (this is something I have done before as this message is common and not serious). I have disabled Windows Firewall temporarily. I have checked the instance name against the error logs. Please advise on both of these errors. I think these two errors are related. Thanks

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• Nginx as a proxy to Jetty

  - by user36812

  Pardon me, this is my first attempt at Nginx-Jetty instead of Apache-JK-Tomcat. I deployed myapp.war file to $JETTY_HOME/webapps/, and the app is accessible at the url: http://myIP:8080/myapp I did a default installation of Nginx, and the default Nginx page is accessible at myIP Then, I modified the default domain under /etc/nginx/sites-enabled to the following: server { listen 80; server_name mydomain.com; access_log /var/log/nginx/localhost.access.log; location / { #root /var/www/nginx-default; #index index.html index.htm; proxy_pass http://127.0.0.1:8080/myapp/; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /var/www/nginx-default; } } Now I get the index page of mypp (running in jetty) when I hit myIP, which is good. But all the links are malformed. eg. The link to css is mydomain.com/myapp/css/style.css while what it should have been is mydomain.com/css/style.css. It seems to be mapping mydomain.com to 127.0.0.1:8080 instead of 127.0.0.1:8080/myapp/ Any idea what am missing? Do I need to change anything on the Jetty side too?

  Read the article

• Ubuntu Hardy : Testing for environment variables in udev rules doesn't seem to work

  - by Fred

  I have a Ubuntu 8.04 LTS (server edition), and I need to write a udev rule for it to act upon plugging a USB thumb drive. However, I need a different action depending on the filesystem of the drive. I know I can use the ID_FS_TYPE environment variable to check for the filesystem on the drive. Following instructions found here, I try a dummy udev rule as such : KERNEL!="sd[a-z][0-9]", GOTO="my_udev_rule_end" ACTION=="add", RUN+="/usr/bin/touch /tmp/test_udev_%E{ID_FS_TYPE}" ACTION=="add", ENV{ID_FS_TYPE}=="vfat", RUN+="/usr/bin/touch /tmp/test_udev_it_works" LABEL="my_udev_rule_end" However, when I plug in a thumb drive with a vfat filesystem (which should trigger both rules), I end up with a file called /tmp/test_udev_vfat, meaning the first rule was triggered successfully, and that the ID_FS_TYPE environment variable is "vfat", but I don't have the other file, meaning that although I know the ID_FS_TYPE env variable is "vfat", I can't seem to check against it for a match. I tried googling the thing, but pretty much every result seems to assume ENV{ID_FS_TYPE}=="vfat" works. I also tested the exact same udev rule on Ubuntu 10.04 LTS server, and I have the same result. I'm probably missing something very simple, but I just don't get it. Does anyone see what is wrong with my udev rule that would prevent it from matching on ENV{ID_FS_TYPE}? Thanks.

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Cisco SG200 vlan issue in ESXi VSA cluster

  - by George

  I have three Cisco SG200-26 switches, and I also have two ESXi hosts that I have connected like shown in the below "best practice" map by VMware: http://communities.vmware.com/servlet/JiveServlet/previewBody/17393-102-1-22458/VSA_networking_map.pdf Even though I created the VLANs in the SG200 and I set the two VLANs (508 and 608) as allowed for these untagged ports (where my ESX NIC's are connected), I can not ping from host 1 to host 2 when configuring the NIC's to use 608 VLAN. Am I missing something? my IP's are all in the 192.168. range, and the only reason I need the VLANs is to isolate the traffic of VSA back-end internally, only the two hosts will be using the VLANs. So I think I do not have to create virtual interfaces on my router since that's the case, is my understanding correct? Also sending my switch config screenshot below.. all 3 switches have the latest firmware (it seems these were originally linksys and got rebranded as cisco after the acquisition) http://img31.imageshack.us/img31/2503/switch.gif Any ideas what to change on the Cisco SG200 to make this work , would be appreciated! The second VLAN (608) only needs two IP's: 192.168.0.1 and 192.168.0.2 The first VLAN (508) will have about 15 IP's for ESXi Management and VSA cluster service, I could use either 192.168.1.xx or 10.0.1.xx The rest of my network (about 50 clients) is in 192.168.1.xx range VMware also states that the VLAN protocol on the physical switch must be 802.1Q, not ISL, anyone knows which of the two my SG200-26 uses? In addition to that, the only requirement from VSA is that my two hosts: -Are in the same subnet. -Have static IP addresses set. -Have the same Default Gateway configured. If I need inter-vlan routing for this, I suppose I have to create virtual interfaces on my sonicwall, and assign an IP for each VLAN, and then set routes between them? Thank you for your time!

  Read the article

• 3GB RAM Installed and Detected by BIOS, Windows Vista 32bit Only Sees 2GB

  - by Nathan Taylor

  I am attempting to install more RAM on a Windows Vista 32bit machine which is using a X6DAL-XG motherboard and the RAM amount reported in the BIOS is 3GB+, but Windows is only reporting 2GB installed. The motherboard has 6 RAM bays which I have populated with various combinations of 4 1GB sticks, and 2 512mb sticks, but no matter how I configure them Windows doesn't see more than 2GB. I realize of course 32-bit Windows has a 3gb cap on memory, but that doesn't explain why it will only report 2GB when there are in fact (currently) 5GB installed. I should think I would be able to see at least 3GB. According to the spec list for the motherboard the minimum RAM requirements are DDR333/266mhz installed in pairs. I have done this exactly, and the BIOS isn't reporting any problems at POST. RAM Configuration (according to CPU-Z): Slot #1: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #2: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #3: PQI - 512mb PC2700 (166mhz) Slot #4: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #5: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #6: PQI - 512mb PC2700 (166mhz) I'm not sure if memory specs above conflict with this statement in the motherboard manual or not: Memory Support The X6DAL-XG supports up to 12GB/24GB of registered ECC DDR333/266 (PC2700/PC2100) memory. The motherboard was designed to support 4GB (PC2100) modules in each slot, but only the 2GB modules have been tested. When using registered ECC DDR333 (PC2700) memory, installing four pieces of double-banked memory or six pieces of single-banked memory is supported. So, am I doing something wrong with the RAM I have now, or is there some sort of compatibility problem which I am missing? Thanks!

  Read the article

• Different routing rules for a particular user using firewall mark and ip rule

  - by Paul Crowley

  Running Ubuntu 12.10 on amd64. I'm trying to set up different routing rules for a particular user. I understand that the right way to do this is to create a firewall rule that marks the packets for that user, and add a routing rule for that mark. Just to get testing going, I've added a rule that discards all packets as unreachable: # ip rule 0: from all lookup local 32765: from all fwmark 0x1 unreachable 32766: from all lookup main 32767: from all lookup default With this rule in place and all firewall chains in all tables empty and policy ACCEPT, I can still ping remote hosts just fine as any user. If I then add a rule to mark all packets and try to ping Google, it fails as expected # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 # ping www.google.com ping: unknown host www.google.com If I restrict this rule to the VPN user, it seems to have no effect. # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 -m owner --uid-owner vpn # sudo -u vpn ping www.google.com PING www.google.com (173.194.78.103) 56(84) bytes of data. 64 bytes from wg-in-f103.1e100.net (173.194.78.103): icmp_req=1 ttl=50 time=36.6 ms But it appears that the mark is being set, because if I add a rule to drop these packets in the firewall, it works: # iptables -t mangle -A OUTPUT -j DROP -m mark --mark 0x01 # sudo -u vpn ping www.google.com ping: unknown host www.google.com What am I missing? Thanks!

  Read the article

• Xbox 360 formatting for MP4 h.264?

  - by Kayle

  For the life of me, I can't get the Xbox 360 to recognize anything other than a WMV. It's full updated with Xbox Live and I even added all the Video apps (Zune, Netflix, etc) just to see if it would force some sort of codec update. I'm using handbrake, at the moment, to try and convert an mkv with subtitles. Handbrake burns the subtitles into the video for me, which is important. I can't figure out what is missing though, as the Xbox refuses to acknowledge my MP4s. Here's the VLC codec info output: As far as I can tell, this is EXACTLY what the xbox supports. I don't want to convert every video twice by throwing it through Windows Movie Maker just to get it to WMV. None of the converters mentions above output to WMV and I don't like WMV since it's not as universal as MP4. I've tried changing the container name manually to M4V, MOV, and AVI to see if I can trick the Xbox... no beans. The video displays perfectly in WMP, of course. If I convert it to WMV, suddenly it works fine. But I don't find this acceptable, as I know the Xbox is supposed to support other filetypes. If anyone knows why my Xbox won't play anything but WMVs, I would be very appreciative to know why! It's driving me nuts. The only other information I can think to include is that it's about 3 years old and of the cheapest variety (Xbox Arcade). I've added a hard drive, xbox live, and have thoroughly updated it. Maybe there's a specific video update I'm unaware of??

  Read the article

• Migrating from "partial" Exchange 2003 to full Exchange 2003 usability

  - by TheCleaner

  I have a client that is using Exchange 2003 on SBS 2003 R2, but only for calendar sharing and contacts sharing. Their email is still coming to their clients via a POP3 account on each client's Outlook. I'd like to move them over to using Exchange for both email and the other things they are utilizing it for now. Can you folks guide me in the right direction? The setup: external domain is akin to domain.com (and is where they get their POP3 email from now) internal domain is akin to domain.local only simple hardware firewall (no ISA) static external IP is available to use My "assumptions": Setup SMTP default connector in Exchange for their existing external domain Have their existing email backed up to PST files (just in case) Setup the new MX records to point domain.com to the static external IP I'm a little confused how I'm going to setup their existing Exchange accounts with the proper SMTP address though. Right now it is just [email protected]. Do I just need to modify or create a new recipient policy? Are there other steps involved that I'm missing? Anyone with a walkthrough or even a basic "steps" is fine. I'm fairly used to Exchange 03, but I've been on Exchange 07 for a while now so going back is the weird part...plus I don't know what issues Exchange 03 on SBS has versus the normal "version". Thanks for all the help!

  Read the article

• Making OpenSSL work on PHP Windows 2008 server with FastCGI

  - by KacieHouser

  I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >