Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 352/527 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Using 1920x1200 mode on SyncMaster T260HD in Linux

  - by dagorym

  I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

  Read the article

• apache-user & root access

  - by ahmedshaikhm

  I want to develop few scripts in php that will invoke following commands; using exec() function service network restart crontab -u root /xyz/abc/fjs/crontab etc. The issue is that Apache executes script as apache user (I am on CentOS 5), regardless of adding apache into wheel or doing good, the bad and the ugly group assignment does not run commands (as mentioned above). Following are my configurations; My /etc/sudoers root ALL=(ALL) ALL apache ALL=(ALL) NOPASSWD: ALL %wheel ALL=(ALL) ALL %wheel ALL=(ALL) NOPASSWD: ALL As I've tried couple of combination with sudoer & httpd.conf, the recent httpd.conf look something as follows; my httpd.conf User apache Group wheel my PHP script exec("service network start", $a); print_r($a); exec("sudo -u root service network start", $a); print_r($a); Output Array ( [0] => Bringing up loopback interface: [FAILED] [1] => Bringing up interface eth0: [FAILED] [2] => Bringing up interface eth0_1: [FAILED] [3] => Bringing up interface eth1: [FAILED] ) Array ( [0] => Bringing up loopback interface: [FAILED] [1] => Bringing up interface eth0: [FAILED] [2] => Bringing up interface eth0_1: [FAILED] [3] => Bringing up interface eth1: [FAILED] ) Without any surprise, when I invoke restart network services via ssh, using similar user like apache, the command successfully executes. Its all about accessing such commands via HTTP Protocol. I am sure cPanel/Plesk kind of software do use something like sudoer or something and what I am trying to do is basically possible. But I need your help to understand which piece I am missing? Thanks a lot!

  Read the article

• Elevating UAC via .bat file?

  - by jslaker

  Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

  Read the article

• Raid-5 Performance per spindle scaling

  - by Bill N.

  So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

  Read the article

• Nginx's speed, and how to replicate it [migrated]

  - by Mediocre Gopher

  I'm interested in this from more than an academic standpoint rather than a practical standpoint; I don't plan on creating a production webserver to compete with nginx. What I'm wondering is how exactly nginx is so fast. The top google response for this is this thread, but it merely links to a cryptic slideshow and a general covering of different io strategies. All other results seem to simply describe how fast nginx is, rather then the reason. I tried building a simple erlang server to try to compete with nginx, but to no avail; nginx won out. All my server does is spawn a new process for each request, uses that process to read the file to a socket, then closes the file and kills the thread. It's not complicated, but given erlang's lightweight processes and underlying aio structure I thought it would compete, but nginx still wins out by a consistent 300 ms average under a heavy stress test. What is nginx doing that my simple server isn't? My first thought would be keeping files in main memory instead of tossing them between requests, but the filesystem cache does this already so I didn't think it would make that great of difference. Am I wrong? Or is there something else that I'm missing?

  Read the article

• .NET 2.0 "not installed" after upgrade to Windows 7

  - by Greg B

  I Recently upgraded to Windows 7 (Business) RTM from Vista Business and everything is going great, it fixed the BSOD I was getting and the performance of my laptop is improved. However; during the upgrade, something seems to have gone awry with my .NET 2.0 installation. When attempting to install FlashDevelop, I get the following error from the installer package You need to install Maicrtosoft.NET 2.0 runtime before installing FlasgDevelop. You Have . I have a previous release of FD installed from before the upgrade and this still works fine. So I gave up on the new version of FD and got on with my day. Then I tried to install the Microsoft SQL Server Database Publishing Wizard 1.1 and that says I am missing a couple of prerequisites, one of which is .NET 2.0. When I download the .NET 2.0 runtime the installer fails, telling me that This product is already installed as part of the operating system. Does anyone have any idea how to make my computer recognise that .NET 2 is in fact installed. UPDATE I've checked Windows Features and everything relating to .NET is already installed. I've also been through my list of installed programs looking for .NET to in an attempt to uninstall it but it isn't there. In fact, the only thing that looks like a .NET distro that I am able to uninstall is the 3.5 Compact Framework.

  Read the article

• Apache debugging: where to find error logs?

  - by AP257

  I'm new to Apache and web serving generally, so apologies if this is a very stupid question. I want to configure a new sub-domain on a working site and install a forum there. I'm using a Debian server that already has Apache, mod_wsgi and a bunch of virtual hosts successfully running on it. I first installed my forum app (Django's OSQA). Following the OSQA instructions, I then created an Apache config file that specified ServerName as the new sub-domain. I also created a .wsgi file for the app, and pointed WSGIScriptAlias at it. I then restarted Apache. However, when I go to the new sub-domain, I get a 404 error message. Two questions: Is there a step missing above? Or is simply creating a new Apache config file in sites-available enough to 'tell' Apache about a new sub-domain? If there's something else going wrong, how can I debug it? The ErrorLog and CustomLog specified in the config file are both blank. apache2.conf, which I guess is Apache-wide configuration, specifies ErrorLog /var/log/apache2/error.log, but this is yet another blank file.

  Read the article

• New virtualization project and old SAN

  - by Chris

  Hi, We'll start shortly a partial virtualization of our infrastructure and consolidate a dozen servers into virtuals instances. We'll also add some client application virtualization into the mix for good measure. Two HP DL 380 with the new xeons 56xx and 96 GB of memory each running xenserver + xenapp will then take charge of most of our IT needs. So far, so good. One element that is missing from the picture is the storage part. We need some sort of shared storage to enable live motion and other HA features. We have an IBM DS 4300 SAN that we can use for that. But since it's in production since 2005, I'm not sure about such a critical role for a 5yr old part. So my question is: What is the reliability of this kind of equipment after 5 yr ? Can it last 10 yr with no or few problems ? Since our budjet is tight, not buying another SAN will be a big plus. This lead me to another question: FC disks cost an arm and a leg from IBM. When I type the replacement # in google (for example IBM 300GB 15K 4GBPS FC HDD 42D0410), I can find it at a fraction of the price at various sites. So am I stupid to buy from IBM or naive to trust 3rd party reseller ?? Thanks, Chris

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

• Why is wget so much faster than Firefox at some downloads?

  - by Earlz

  Recently, I needed to do an update of Xilinx WebPack, mind you, this is one hefty piece of software. It weighs in at 6gigs, which definitely isn't "quick" on any internet I've ever had available to me. So, when I went to download it(using Firefox of course), I was very... unsettled by the fact that the download was only going at 110kByte/s. My internet connection is capable of about 2200kByte/s download, so what gives!? My workaround in the past for this issue has been to take the link to my Linode linux server and download it there with wget, where the download will zip along at 14MByte/s, and then either copying it to my website directory and downloading it that way through HTTP, or using sftp. Both ways work about as well and will sufficiently max out my connection. However, I recently figured out the missing variable. I tried doing the download locally with wget and was able to max out my connection! TL;DR; Now, my question. Why is wget so much faster than firefox at downloading this file? I hardly ever have such a difference in download speeds except for with this one file.

  Read the article

• Moodle serves on IP only - will not work with mod_proxy

  - by Jon H

  I'm trying to set a moodle server up on an Ubuntu box, which already serves Plone & Trac via Apache. In my Moodle config I have $CFG-wwwroot = 'http://www.server-name.org/moodle' The configuration below works fine for the first two, but when I visit www.server-name.com/moodle I get: Incorrect access detected, this server may be accessed only through "http://xxx.xxx.xxx.xxx:8888/moodle" address, sorry It then forwards to the IP address, where Moodle functions fine. What am I missing to get the server name approach working correctly? Apache Config follows: LoadModule transform_module /usr/lib/apache2/modules/mod_transform.so Listen 8080 Listen 8888 Include /etc/phpmyadmin/apache.conf <VirtualHost xxx.xxx.xxx.xxx:8080> <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On <Location /> ProxyPass http://127.0.0.1:8082/ ProxyPassReverse http://127.0.0.1:8082/ </Location> </VirtualHost> <VirtualHost xxx.xxx.xxx.xxx:80> ServerName www.server-name.org ServerAlias server-name.org ProxyRequests Off FilterDeclare MyStyle RESOURCE FilterProvider MyStyle XSLT resp=Content-Type $text/html TransformOptions +ApacheFS +HTML TransformCache /theme.xsl /home/web/webapps/plone/theme.xsl TransformSet /theme.xsl FilterChain MyStyle ProxyPass /issue-tracker ! ProxyPass /moodle ! <Location /issue-tracker/login> AuthType Basic AuthName "Trac" AuthUserFile /home/web/webapps/plone/parts/trac/trac.htpasswd Require valid-user </Location> Alias /moodle /usr/share/moodle/ <Directory /usr/share/moodle/> Options +FollowSymLinks AllowOverride None order allow,deny allow from all <IfModule mod_dir.c> DirectoryIndex index.php </IfModule> </Directory> </VirtualHost>

  Read the article

• Registering publicly Mail server and Web server in a free dns server

  - by Bruno Vieira

  I'm trying to host the e-mails and the site of our company into our private server. I've already followed the Gentoo Virtual Mailhosting System with Postfix Guide and my mail server is working (actually it sends mails for the local users and for external users it goes to spam) and know how to set an Apache 2 server. What I don't know (and I mean really don't) is how to make them public. I did some research and found that I should ask my ISP to change the reverse DNS to my company domain in order to prevent my mails to be marked as spam, they are doing. I already know I have to configure a DNS Server, it seems like my register provider already has one but I don't know how I can configure CNET, A, MX, TXT and all those tags (Is it tags the name?) and If I must do some other configuration on my server. My Server: Linux mail 3.2.21-gentoo #1 SMP My /etc/hosts: 127.0.0.1 mail.example.com.br example example.com.br ::1 mail.example.com.br mail example.com.br My /etc/conf.d/hostname: hostname ="mail" What am I missing? If there's a guide about how to configure I would really be grate. Thanks in advance for the help. Cheers

  Read the article

• Refresh file access time under Linux / Discard disk read cache

  - by calandoa

  I am making use of the access time to analyse some build process, but it is not working the way I want: the access time is updated the first time I read the file, then it stays the same for a long while, or until the next reboot. For instance: $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 10:03 some_file $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time is updated # waiting a few minutes... $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time has not been updated :( I suppose that the file is buffered by Linux in the free memory, the only this copy is accessed the subsequent times for speed reasons. A solution would be to discard the buffers in memory. After searching some forums, I found: sync echo 1 > /proc/sys/vm/drop_caches echo 2 > /proc/sys/vm/drop_caches echo 3 > /proc/sys/vm/drop_caches But it is not working, it seems that it only sync up the write buffers, not the read ones. May be it is due to some custom kernel configuration on my distro (fedora 9)? Or I am missing something here? Is there a way to achieve this access time refresh? Note also that I do not want to simulate some writes on my entire file tree. Because I am using some makefile based build system, this will cause the entire project to be build again.

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Synchronization of volume snapshots when doing whole system backups

  - by intuited

  Is there a way to guarantee consistency across volumes when doing backups from LVM snapshots? Consider this scenario: Some system upgrade is in progress. It will write some files to the /usr volume, and once completed, will record success in the /var volume. As the upgrade is just about complete, I run a backup script that creates snapshots of the /usr and /var volumes, along with the rest of the system's volumes, and proceeds to create backups from those snapshots. Just before the upgrade's last write/flush on the /usr volume completes, the backup script takes its snapshot of /usr. That write completes, and the upgrade operation's success is quickly recorded in the nebulous depths of /var. The backup script takes a snapshot of /var. The backup script creates backups from the snapshots it has, er, snapshotted. So the result of all of this tomfoolery is that the resulting /usr backup contains a file which is missing a few bits, and the /var backup contains metadata indicating that that file is complete and approved for use. Without delving into the details of which operating systems' system upgrade systems would be unfazed by such trifles, is there a way to avoid such problems? At the least this seems like it could cause some application to fail unexpectedly after restoration of such a backup.

  Read the article

• Error installing new rails version. Failed to build gem native extension.

  - by davidcmolina

  I am trying to build my first ruby on rails app using the following guide (http://ruby.railstutorial.org/chapters/a-demo-app#code-demo_gemfile_sqlite_version_redux) and have run into a few obstacles. The first, receiving errors when upgrading to the latest rails version 3.2.8. bash-3.2$ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out Even when trying to install from rails app: $ gem install rails Building native extensions. This could take a while... ERROR: Error installing rails: ERROR: Failed to build gem native extension. /Users/davidmolina/.rvm/rubies/ruby-1.9.3-p194/bin/ruby extconf.rb creating Makefile make compiling generator.c make: /usr/bin/gcc-4.2: No such file or directory make: *** [generator.o] Error 1 Gem files will remain installed in /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5 for inspection. Results logged to /Users/davidmolina/.rvm/gems/ruby-1.9.3-p194/gems/json-1.7.5/ext/json/ext/generator/gem_make.out When trying to Bundle Install: $ bundle install Could not locate Gemfile Background details: Mac OS X Version 10.8.2 Ruby 1.9.3 Rails 2.3.4 I'm wondering if there is a direct one-liner or gem that is missing?

  Read the article

• Trying to build OpenSimulator.. nant fails

  - by Gary

  Output of nant is: Buildfile: file:///root/opensim-0.6.8-release/OpenSim.build Target framework: Mono 2.0 Profile Target(s) specified: build [echo] Using 'mono-2.0' Framework init: Debug: [echo] Platform unix build: [nant] /root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/OpenSim.Framework.Servers.HttpServer.dll.build build Buildfile: file:///root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/OpenSim.Framework.Servers.HttpServer.dll.build Target framework: Mono 2.0 Profile Target(s) specified: build build: [echo] Build Directory is /root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/bin/Debug [csc] Compiling 29 files to '/root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/bin/Debug/OpenSim.Framework.Servers.HttpServer.dll'. [csc] /root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/AsynchronousRestObjectRequester.cs(103,41): error CS0246: The type or namespace name `TResponse' could not be found. Are you missing a using directive or an assembly reference? [csc] Compilation failed: 1 error(s), 0 warnings BUILD FAILED - 0 non-fatal error(s), 1 warning(s) /root/opensim-0.6.8-release/OpenSim/Framework/Servers/HttpServer/OpenSim.Framework.Servers.HttpServer.dll.build(14,6): External Program Failed: /usr/lib/pkgconfig/../../lib/mono/2.0/gmcs.exe (return code was 1) Total time: 1.2 seconds. BUILD FAILED Nested build failed. Refer to build log for exact reason. Total time: 1.3 seconds. OS is Fedora 7. Any ideas appreciated. :)

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. They pointed me here. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. I see where this has been asked before. I want to add that I am using xampp. In Mac OS 10.6.8. I tried changing the php.ini SMTP command to macintosh-3.local. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• How to install service packs onto Thin Apps and other questions

  - by Buzlightyear

  I have a VM that I use to do all my ThinApps, Once I have done my application and its built I copy just the bin folder to a server which has a share, I then create a shortcut to the program exe on users desktops. This all seems to work ok. Firstly is this correct? If so, how then do I apply a service pack to that application after the ThinApp VM has been reverted to a base image, I have corel draw which i have a service pack for but it wont intall it as its saying it cant find the package installed on the computer. I have Thinreg batch file so have included corel into that and the program appears in the program list. I have the sandbox redirected to the server share mentioned earlier into seperate user folders when the user logs in. Obvisouly once i have done a App I revert to a previous snapshop so my thinapp vm is back to base image, so the corel install is lost. Sorry if im missing something very simple. Is its a case if you have an exe/msp you have to reinstall the whole app again and start over, Thanks for any help.

  Read the article

• 403 Forbidden when Deploying asp.net 4.0 site to IIS 7

  - by Jordan

  So I have an EC2 instance running, the URL NoWeatherSurprises.com I have the DNS pointing there, and I set up a new site in IIS 7 and pointed it to a folder. I used Visual Studios Web Developer 2010 express to publish to this folder. It now has the binaries and such. However if I go to NoWeatherSurprises.com I get the welcome to IIS 7 screen. I'd expect to go to my application If I navigate to http://noweathersurprises.com/weather/ [weather was the folder I published to under wwwroot] I get a 403 forbidden. I have no idea why, I am guessing that it is trying to do a directory listing or something instead of launching my MVC Application. So 2 problems in summary. It is not pointing the domain to the folder directly and I need to add /weather I am getting a 403 forbidden instead of the results of my home controller with the index action. I am new to IIS 7, I had been using IIS 6 and had a lot less trouble setting it up, but I suspect that's my own fault and i am just missing something. Thanks in advance for any help

  Read the article

• New XPC: No video, no ethernet link, but drive spins

  - by Mike Pennington

  I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

  Read the article

• configure Squid3 proxy server on Ubuntu with caching and logging

  - by Panshul

  I have a ubuntu 11.10 machine. Installed Squid3. When i configure the squid as http_access allow all, everything works fine. my current configuration mostly default is as follows: 2012/09/10 13:19:57| Processing Configuration File: /etc/squid3/squid.conf (depth 0) 2012/09/10 13:19:57| Processing: acl manager proto cache_object 2012/09/10 13:19:57| Processing: acl localhost src 127.0.0.1/32 ::1 2012/09/10 13:19:57| Processing: acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 2012/09/10 13:19:57| Processing: acl SSL_ports port 443 2012/09/10 13:19:57| Processing: acl Safe_ports port 80 # http 2012/09/10 13:19:57| Processing: acl Safe_ports port 21 # ftp 2012/09/10 13:19:57| Processing: acl Safe_ports port 443 # https 2012/09/10 13:19:57| Processing: acl Safe_ports port 70 # gopher 2012/09/10 13:19:57| Processing: acl Safe_ports port 210 # wais 2012/09/10 13:19:57| Processing: acl Safe_ports port 1025-65535 # unregistered ports 2012/09/10 13:19:57| Processing: acl Safe_ports port 280 # http-mgmt 2012/09/10 13:19:57| Processing: acl Safe_ports port 488 # gss-http 2012/09/10 13:19:57| Processing: acl Safe_ports port 591 # filemaker 2012/09/10 13:19:57| Processing: acl Safe_ports port 777 # multiling http 2012/09/10 13:19:57| Processing: acl CONNECT method CONNECT 2012/09/10 13:19:57| Processing: http_access allow manager localhost 2012/09/10 13:19:57| Processing: http_access deny manager 2012/09/10 13:19:57| Processing: http_access deny !Safe_ports 2012/09/10 13:19:57| Processing: http_access deny CONNECT !SSL_ports 2012/09/10 13:19:57| Processing: http_access allow localhost 2012/09/10 13:19:57| Processing: http_access deny all 2012/09/10 13:19:57| Processing: http_port 3128 2012/09/10 13:19:57| Processing: coredump_dir /var/spool/squid3 2012/09/10 13:19:57| Processing: refresh_pattern ^ftp: 1440 20% 10080 2012/09/10 13:19:57| Processing: refresh_pattern ^gopher: 1440 0% 1440 2012/09/10 13:19:57| Processing: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 2012/09/10 13:19:57| Processing: refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 2012/09/10 13:19:57| Processing: refresh_pattern . 0 20% 4320 2012/09/10 13:19:57| Processing: http_access allow all 2012/09/10 13:19:57| Processing: cache_mem 512 MB 2012/09/10 13:19:57| Processing: logformat squid3 %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru 2012/09/10 13:19:57| Processing: access_log /home/panshul/squidCache/log/access.log squid3 The problem starts when I enable the following line: access_log /home/panshul/squidCache/log/access.log I start to get proxy server is refusing connections error in the browser. on commenting out the above line in my config, things go back to normal. The second problem starts when i add the following line to my config: cache_dir ufs /home/panshul/squidCache/cache 100 16 256 The squid server fails to start. Any suggestions what am I missing in the config. Please help.!!

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >