Search Results

Search found 13249 results on 530 pages for 'virtualized performance'.

Page 347/530 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• How does ARM Cortex A8 compare with a modern x86 processor

  - by thomasrutter

  I was wondering how does a modern ARM chip based on ARM Cortex A8 compare, in clock-for-clock performance and capability, to a modern x86 chip such as a Core 2 Duo or Core i5? I realise due to the different instruction sets it'll depend heavily on what you're doing. To put it another way, rendering a web page in webkit on a 1GHz ARM Cortex A8 based chip should be about equivalent to doing in on a Core i5 at __ MHz? Update October 2013: Since I asked this question years ago it's become a lot more common, when reading about mobile devices, to see architecture-agnostic benchmarks that you can compare across platforms - for example, in-browser benchmarks like Sunspider in Webkit will run on just about anything and you see these in reviews all the time now. And there's things like Geekbench now.

  Read the article

• external HDD with SATA & USB interface? [closed]

  - by GregH

  Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

  Read the article

• Loadbalance UDP traffic with session affinity and way to take servers in & out of rotation

  - by William

  What is the best way to go about load balancing UDP traffic among a whole bunch of servers, while keeping session affinity based on the users' IP? I need to also be able to take servers in and out of rotation for new clients, so when they join for the first time, they get put on a server in a list of available servers, and clients already connected would stay connected to their specific server. I have written the software to maintain a list, but I can't seem to find anything that would perform this functionality. If you need the context, this is to facilitate game tournaments for Minecraft: Pocket Edition, which is done with UDP traffic, I cannot change the protocol. And, because tournaments open and close, I need to be able to place players on their proper servers. Performance is also a priority, I have a program to do this but it is very bloated and slow. Thanks for any help! William

  Read the article

• Samsung 830 very slow benchmark numbers

  - by alekop

  I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

  Read the article

• Good/Better config for MySQL on an EC2 Large Instance

  - by Tim Reynolds

  I have an EC2 Large instance dedicated to MySQL. It will be serving a Joomla/Magento combo so it has a blend of InnoDB and MyISAM tables. I have only worked with MyISAM in the past and am therefore unfamiliar with the settings InnoDB uses. Experiments so far have been less than fruitful, as I keep causing the InnoDB engine to be disabled. My instance is running Ubuntu 10.04 64 bit server edition and has ~7.5G of ram. MySQL is currently using ~0.6% of that, with somewhat poor performance. I would like to configure it to use as much of the system RAM as is reasonable. Testing some settings I learned that the InnoDB logs can't collectively be larger than 4G. Would anyone be able to provide some base InnoDB and MyISAM settings to get my started. Thank you Tim

  Read the article

• Apps crashing - Android 4.3 in VirtualBox

  - by Nasenbaer

  Performance and stability problem with Android 4.3 in VM. Tried with x64 and x86 System. VirtualBox V4.3.2 in use. Android could be installed on x86 only. But there it seems to be successfully, using the "Linux 2.2" template on VirtualBox. 1024MB RAM and 2GB Harddisk defined. Some times Android browser is crashing and closing. In all cases stuff like "Skype" and "Plats vs Zombies" does never startup after installing. Crashes directly. "Plats vs Zombies 2" is not able to install. Is there any way of gettings such stuff work?

  Read the article

• How to increase video memory in libvirt/KVM gui?

  - by Dejan

  In the 'Virtual Hardware details', it lists the model as 'cirrus' with 9MB of RAM. The RAM field cannot be changed, but how to increate the video RAM? My host OS is RH6 and gust OS is Fedora16. EDIT: From guest OS, when I run xvinfo it displays 'no adaptors present'. I was trying to play a video using gstreamers xvimagesink plugin (XFree86 video output plugin using Xv extension). The problem is that xvimagesink is using hardware acceleration for video performance and hence the error Could not initialize Xv output. I guess I'll have to configure hardware acceleration for the guest.

  Read the article

• What are the minimum hardware requirements for the latest version of Android Jelly Bean OS?

  - by Stom

  I searched around, and there's no information that points exactly to the suggested, minimum, or otherwise dated information containing specifications on this. I want to install a newer version of Android on an older ZTE-X500 MetroPCS smartphone. However, I'd like to know the backwards compatibility in regards to using a newer featured OS with lackluster, limited hardware compared to today's smartphones, such as Galaxy S4. However, I still wish to do this. If Jelly Bean is too demanding, I will set up Honeycomb, or get a modified Honey Comb ROM, or tweak the source to my preferences. However, nothing outlines the specifics of the "system requirements" it suggests for optimum performance, such as RAM, processor speed, processor features, and/or any other features, like DMA, video circuit advancements, and/or sound and special hardware requirements noted as well. Please, if you will, point me to a source that mentions this, and please tell do not link me to any PDF file formats. Thank you. PS: I'm a computer programmer.

  Read the article

• Dual HDMI input - HD Video Capture Card

  - by Shivan Raptor

  Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

  Read the article

• Virtual server hardware to simulate 3-4 node web farm

  - by frankadelic

  I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

  Read the article

• Hyper-V core NIC speeds and registry changes

  - by gary

  Good afternoon, On a Dell PE T610 I have Hyper-V core running, with 2 x Broadcom BCM5709C NetXtreme II GigE installed. I have noticed that copying large files 17GB for example, from a network physical server to the Hyper-V host local drive [not vm guest] is very slow in comparison to copying from Physical to Physical servers. Copying a 17GB file physical to Hyper-V host takes 30 minutes Copying a 17GB file physical to physical host takes 15 minutes Can someone tell me exactly what registry nodes I should disable on Hyper-V NICs to improve performance. So far I have gone to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class{4 D36E972-E325-11CE-BFC1-08002BE10318} and set the following to 0 on both physical NICs: *LSOv1IPv4 *LSOv2IPv6 *TCPUDPChecksumOffloadIPv4 *TCPUDPChecksumOffloadIPv6 Should I also disable *TCPConnectionOffloadIPv4 & *TCPConnectionOffloadIPv6? Many thanks in advance

  Read the article

• Install both 64-bit and 32-bit JDK on a 64-bit windows?

  - by Toperi

  I need to use a java library that uses native code requiring a 32-bit jvm. I have 64-bit windows with 64-bit eclipse installed with 64-bit JDK7. In order to develop with it, do I need to have 32-bit JDK? Or would the JRE suffice? If it is possible to install both, what is the naming convention you use for the installation directory for the 32-bit jre or jdk? I have heard rumors there is a performance hit on virtual memory if both are installed, is this true?

  Read the article

• Flexible virtualization infrastructure Design with libvirt

  - by Lessfoe

  I'm going to install a CentOS6 Server with Virtualization ( libvirtd ) capabilities on a DELL Server with Hardware RAID5 of around 6T of disk space ( It has 4x2T disks in a PERC700 RAID Controller ). I'm going then to install some guests which requires few resources except one that needs 500GB of disk space, 8/16GB of RAM and good performances. I was thinking about file images for guests storage but I'm not sure about the 500GB VM what needs good performances so that an LVM device could be better. So my question is what would be the best layout concerning: RAID setup ( RAID5, RAID1 + 1 disk for OS only. ) disk partitioning ( using the entire disk/ leave free space for future use and extending it with LVM ) guests storage management ( LVM devices or file images ( considering the 500GB VM that is performance demanding ) or mixed ) Where to put guests storage? /var/lib/libvirt/images or maybe in a custom dir separated from system /home/VMs Thanks in advance for any hint.

  Read the article

• VMware networking - PortChannel or not?

  - by dunxd

  My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

  Read the article

• Options to optimize lotus notes 8.5.X

  - by Jakub

  Has anyone found actually useful optimization methods for the bulky, fat, eclipse giant, nuissance that is Lotus Notes 8.5? I want it to be fast, and not eat up system resources like crazy while I run it ALL day (as it is my company's corporate mail / cal / scheduling solution). I've tried various hacks for the JVM heap size (if I recall correctly). None really bring a performance improvement. I have a dual core cpu, if that helps (I tried going the route of optimizing JAVA for 2 cores in hopes it would work, but seen no speed improvement). Notes is just sooo bloated, anyone have any suggestions to optimize/mod this thing so it is more responsive and less of a resource hog. Note: I don't want to switch to the web version, or the standard stripped down versions, I am aware of those, I just cannot since we don't run those internally for the company.

  Read the article

• best practices for setting development environment

  - by Sharique

  I use Linux as primary OS. I need some suggestions regarding how should I set up my desktop and development. I do work on mostly .Net and Drupal, but some time on other lamp products and C/C++, Qt. I'm also interested in mobile (android..) and embedded development. Currently I install everything on my main OS, even I use it a little. I use VMs a little. Should I use separate VM for each kind of development (like one for .Net/Mono, another C++, one for mobile and one for db only, one for xyz things etc) Keep primary development environment on main os and moveothers in VM. main os should be messed up keep things easy to organize (must) performance should be optimal

  Read the article

• Mono on Linux: Apache or Nginx

  - by Furism

  Hi, I'm developing an ASP.NET application that will be run under Linux/Mono for various reasons (mostly to stay away from IIS, quite frankly). Of course the first web server I had in mind was Apache. But Apache, for all its advantages, adds a lot of overhead. Also, the application I'm building needs to be highly scalable and performance is one of the main concern. Apache has, obviously, a very good reputation and its record speaks for itself, but I don't need things like Reverse Proxy or Load Balancing because dedicated network devices would be used for that. So those modules from Apache will never be used. So basically my question is: since Nginx seems to fit exactly needs, is there any caveat I should be aware of? For instance, is Nginx renowned to be particularity safe? When security flaws are detected, how fast are they patched? Any insight on the pros and cons of using either of those servers in conjunction with Mono is welcome.

  Read the article

• Xeon X5550 vs Six-core Opteron for database server

  - by gregmac

  I'm specing out a database server, and the price works out to be reasonably close between an Intel X5550 Quad-core and an AMD 2425HE (2.1Ghz) Six-core Opteron. I've been looking for some comparisons between the two, but the only thing useful I've found is an AnandTech Review of the 2435 which compares it to Intel Xeons, but concludes they both have their place. My load is MS SQL Server 2008, with an OLTP database that has about an equal amount of reading/writing (and it's a reasonably heavy load). So my question is, what is going to work better in this situation, assuming the drives are the same: Xeon X5550, with 16GB 1333Mhz RAM (Dell R510) or an Opteron 2425HE (2.1Ghz) or 2439SE (2.8Ghz) with 16GB of 800Mhz RAM? (Dell 2970) Note: the 2439 adds $500, but the overall pricing works out that it's not that much more than the R510. Using the 2425HE, the Dell 2970 server is slightly less than the similarly-equipped R510). If it adds a decent amount of performance, it's worthwhile to go faster. (single CPU, in both cases).

  Read the article

• Does my motherboard support dual-core processors?

  - by Filip

  Hi there! I'm very confused about my motherboard (ConRoe945PL-GLAN) It's manual says, that i can use only some kind of ConRoe processors. But some pages on internet says that i can plug in almost everything. For ex.: aria.co.uk says that i can plug in even Core 2 Duo. It would be awesome if i would not have to buy new motherboard! Anyway, if my motherboard will not let me to plug in Core 2 Duo, should i buy Pentium 4 (very cheap) with 3,2 GHz and insanely overclock it to have some performance or buy new motherboard + new processor for big money? THX for any answers! =)

  Read the article

• Network / Internet diagnostic tool to locate an error?

  - by Jesper

  Hi, I’m facing some difficulties with the Internet / network at my work and I have trouble locating the precise error and when and how it occurs. The problem is that the client machines in the house sporadic is disconnected to the Internet. I’m some what new so I haven’t that much inside in the network and apparently neither has my predecessor. What I am requesting and hoping you guys knows about is, if there exist some kind of network monitor tool I can install and run and it will periodically check the network, the Internet connection etc. and record to logs. Then, if there suddenly arises a problem some time of the day in some part of the network or the Internet connection, I can check it perhaps the next day. I’ve just downloaded and installed Microsoft Network Monitor 3.3 application and hopeful it can give me some answers on where the instability is located but I still would like a tool to make different checks and test in some time interval. Do anyone know about such a program or another kind of performance / diagnostic tool / method I can use? Sincere Jesper

  Read the article

• BES 5.0 and MAPI calls to exchange system

  - by nysingh

  We have been using BES 4.1(5) for a while now and it has been a resource hog on exchange due to high number of MAPI calls. I have heard that BES 5.0 is even worse. the comparison i heard is that BES 4.1 is makes MAPI calls equal to 5 outlook clients per BB user and BES 5.0 makes MAPI calls equal to 10 outlook clients per BB user. can someone confirm if it is true? is BES 5.0 is really that bad in MAPI calls and for exchange performance. ? thanks

  Read the article

• Does the ``-'' sign have meaning in rsyslog.conf

  - by Aleksandr Levchuk

  Rsyslog is backwards-compatible with Syslog configuration files. The syslog.conf man page has: You may prefix each entry with the minus ``-'' sign to omit syncing the file after every logging. Note that you might lose information if the system crashes right behind a write attempt. Nevertheless this might give you back some performance, especially if you run programs that use logging in a very verbose manner. but I could not find aything about the - sign in man rsyslog.conf. What does rsyslog do when if reads - in the config file?

  Read the article

• How to unmount a VHD in Windows 7. There is no unmount option.

  - by Triynko

  I mounted a VHD file in Windows 7 using the Disk Manager. Once mounted, there is no option to Unmount it. The only thing close to such an option that I can find is if I click the icon in the taskbar notification area that I use to remove USB devices... there's an option to eject the virtual hard disk. However, when I click that, it says that it's in use and cannot be ejected. Even though... it's not in use, I never even browsed the drive. The disk manager is closed... and the only open files handles to the drive (according to disk performance in task manager) is SYSTEM. Ejecting devices cleanly has been a problem since Windows XP, and it sickens me to see it persist into windows 7.

  Read the article

• Connect two subnets without router

  - by Shcheklein

  I got two Comcast routers with two different subnets on each. Every subnet contains 5 static IPs. Two questions: Are there any problems if both routers and machines from both subnets are connected into one switch? Security issues doesn't matter there. I need to know if there are some performance or other problems. Is it possible to make machines from different subnets to see each other if they all are connected into one switch? Some static routing, add ARP records or somethig else ... I just want to avoid configuring second ethernet adaptors, third router or something. And I need to connect these subnets vai high-speed local network.

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >