Search Results

Search found 11825 results on 473 pages for 'all tech stuff'.

Page 349/473 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• Using native resolution on external display results in stretched, out of bounds image

  - by Roni Yaniv

  I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

  Read the article

• How expensive to run PC 24/7 or how to figure out how to determine it?

  - by jasondavis

  I realize this question is difficult to answer as it would be different based on users location, what there PC is doing and what hardware it consist of, along with other factors but I am hoping someone could give me a very rough estimate. I have always ran many PC's in my home 24/7 and I am just now looking at it from a money/cost of electric point of view. 1) I live in Central Florida. Can anyone guesstomate/estimate the avaerage monthly or daily cost of running your average PC? Intel quad core processor, 1 SSD drive for OS and programs and 4-5 1-2 TB hard drives in a RAID setup for data. 750watt PSU. What would your guess be? 2) Also is there an accurate way to figure this out (non-super technical and confusing to a non-math person please) Also I have seen those kill-a-watt devices, do they figure this kind of stuff out for you? 3) Does a larger PSU make your PC consume more power? Thanks for any help, you can most likely tell I am somewhat lost about this!

  Read the article

• Getting started with webserver clustering.

  - by Ernie

  I work for a small ISP, and we host about 250 domains and all the stuff that goes along with that: DNS, mail, spam filtering, and backups. Currently, we have separate DNS servers (two of them) and mail servers (outgoing mail is actually on the secondary DNS server, but was previously on its own server). In the past, this was done as an insurance measure. The last thing we need is for some doofus (usually yours truly) to hose a server, taking out DNS and mail right along with it, or for spammers to jam our incoming SMTP server, preventing outgoing mail from being sent too. In the past, this was a problem, and our servers were set up the way they are now to combat it. However, clustering solutions like Sun's Cobalt RAQ (in days of olde) and Virtualmin appear to cater to an all-in-one approach, then deal with failures through redundant servers. I have avoided this thus far, but we've been using Virtualmin on our web server for a while now, and I'd like to expand into using it for a high availability cluster. Our networking partner has recently built a datacenter that has eliminated all of our other bugaboos like network, cooling, and power issues, so now the only thing left to go wrong is me hosing a server, which happened earlier this month. One of the bigger reasons we've avoided going this route is because our hardware requirements aren't particularly high. One server easily handles all the sites we host (most of them are flat sites). Also, load-balancing routers tend to be expensive and complicated. All that I'm really expecting to do is building a two-node cluster for redundancy so that when I hose a server (however rare that might be), we're not out for 8-12 hours while I rebuild it. What I need to know is how to get started, and if I'm really in a position to bother with this kind of thing at all.

  Read the article

• Failover strategy for a 4 servers scenario

  - by Joao Villa-Lobos

  Hi all, I am trying to figure out how to set up replication & failover in a scenario with 4 servers (2 per location) where any server may assume the Master role. My initial scenario is the following one: 2 servers in location A (One Master, One Slave); 2 servers in location B (Two Slaves). For this I'm thinking on using the configuration Master-Master Active-Passive suggested on O'Reilly's "High Performance MySQL" on all of them so each one can become a Master when needed. If the Master "dies" the other server from location A assumes the Master role whenever possible. It will always have a bigger priority then the servers on location B. A server on location B will only switch to Master if no server on location A is able to do so. Since MySQL can't handle this automatically I need some other way to implement this. I've read already about heartbeat and Maatkit. Is this the way to go? Has anyone used this in a similar scenario? Is there some other way to go in order to achieve this? Any pointers about failout will be appreciated. I want to keep this as simple as possible avoiding stuff such as DRDB. I'm not concerned about high availability just a way to switch roles automatically without too many hassle. I'm using SuSe Enterprise 10 and MySQL 5.1.30-community. Thanks in advance, João

  Read the article

• How to have SSL on Amazon Elastic Load Balancer with a Gunicorn EC2 server?

  - by Riegie Godwin

  I'm a self taught back end engineer so I'm learning all of this stuff as I go along. For the longest time, I've been using basic authentication for my users. Many developers are advising against this approach since each request will contain the username & password in clear text. Anyone with the right skills can sniff on the connection between my iOS application and my Django/Gunicorn Server and obtain their password. I wouldn't want to put my user's credentials at risk so I would like to implement a more secure way of authentication. SSL seems to be the most viable option. My server doesn't serve any static content or anything crazy of that sort. All the server does is send and receive "json" responses from and to my iOS application. Here is my current topology. iOS application ------ Amazon Elastic Load Balancer ------- EC2 Instances running HTTP Gunicorn. Gunicorn runs on port 8000. I have a CNAME record from GoDaddy for the Amazon Elastic Load Balancer DNS. So instead of using the long DNS to make requests, I just use server.example.com. To interact with my servers I send and receive requests to server.example.com:8000/ This setup works and has been solid. However I need to have a more secure way. I would like to setup SSL between my iOS application and my Elastic Load Balancer. How can I go about doing this? Since I am only sending json responses to my application, do I really need to buy a certificate from a CA or can I create my own? (since browsers will not be interacting with my servers. My servers are only designed to send json responses to my iOS application).

  Read the article

• Recover mysql database - mysqldump gives "table <tablename> doesn't exist (1146)"

  - by Matthew

  Backstory Ubuntu died (wouldn't boot) and I couldn't fix it. I booted a live cd to recover the important stuff and saved it to my NAS. One of the things I backed up was /var/lib/mysql. Reinstalled with Linux Mint because I was on Ubuntu 10.0.4 this was a good opportunity to try a new distro (and I don't like Unity). Now I want to recover my old mediawiki, so I shut down mysql daemon, cp -R /media/NAS/Backup/mysql/mediawiki@002d1_19_1 /var/lib/mysql/, set file ownership and permissions correctly, and start mysql back up. Problem Now I'm trying to export the database so I can restore the database, but when I execute the mysqldump I get an error: $ mysqldump -u mediawikiuser -p mediawiki-1_19_1 -c | gzip -9 > wiki.2012-11-15.sql.gz Enter password: mysqldump: Got error: 1146: Table 'mediawiki-1_19_1.archive' doesn't exist when using LOCK TABLES Things I've tried I tried using --skip-lock-tables but I get this: Error: Couldn't read status information for table archive () mysqldump: Couldn't execute 'show create table `archive`': Table 'mediawiki-1_19_1.archive' doesn't exist (1146) I tried logging in to mysql and I can list the tables that should be there, but trying to describe or select from them errors out the same way as the dump: mysql> show tables; +----------------------------+ | Tables_in_mediawiki-1_19_1 | +----------------------------+ | archive | | category | | categorylinks | ... | user_properties | | valid_tag | | watchlist | +----------------------------+ 49 rows in set (0.00 sec) mysql> describe archive; ERROR 1146 (42S02): Table 'mediawiki-1_19_1.archive' doesn't exist I believe mediawiki was installed using innodb and binary data. Am I screwed or is there a way to recover this?

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" after about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason I put this in quotation marks is that it does not really freeze, as I you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading means, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. The fact that I can see navigate to applications but not use them might suggest a hard drive problem as well? Maybe I can access the stuff that is in RAM, but not anything that would require interaction with the drive.. Very appreciative of any help!

  Read the article

• Set up server at home for running svn and Bugzilla

  - by erikric

  Hi, I'm a fairly experienced developer, but when it comes to servers and network related stuff, I'm pretty green. We are developing a web site, and I would like to set up a server that can host my SubVersion repository, and also host Bugzilla for when we release a testversion on some users. So what do i need to accomplish this? I have an old computer that can be used. Can I run this on any OS? It currently has Win 7 installed, but I was thinking about going for Ubuntu instead. Any reason to go for one or the other? I guess I need a web server, and I guess Apache will do fine. Do I need something else to let my computer be available from all over the web, or is a web server and a standard internet connection all it takes? A link some good online tutorials would be much appreciated. And then I mean for real dummies ;). I usually find pages that try to explain setting up servers going way over my head.

  Read the article

• Limiting access in Silverlight\Pivotviewer

  - by sparaflAsh

  I'm going to deploy a pivotviewer application. As some of you might know this silverlight application load a .cxml index file for a group of images. My need is to make .cxml file and image files not accessible for the user. Now, if I don't have a need I usually code like this in C# and the file is hosted in the documentroot: _cxml = new CxmlCollectionSource(new Uri("http://www.myurl.it/Collection.cxml", UriKind.Absolute)); This means that my cxml and then the images are available by http for everyone who knows the URI. I'm a newbie to server configuration, so any help/hint would be deeply appreciated. Someone suggested me to take the files out of the root, but it seems like I can't go to pick them up if they are not a URL in Silverlight. At least I didn't managed to understand how. Someone else suggested me to play with web.config file to hide URLs, but I don't really know where to start. My question is, what's the best practice to hide my stuff? Obviously I can edit the question if you need more details.

  Read the article

• How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

  - by Abs

  I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Unable to install mod_wsgi on CentOS 5.5 VPS...

  - by jasonaburton

  I am trying to install mod_wsgi on my VPS, but it won't work. This is what I am doing: wget http://modwsgi.googlecode.com/files/mod_wsgi-2.5.tar.gz tar xzvf mod_wsgi-2.5.tar.gz cd mod_wsgi-2.5 ./configure --with-python=/opt/python2.5/bin/python After I run the above command, I get this error: checking for apxs2... no checking for apxs... no checking Apache version... ./configure: line 1298: apxs: command not found ./configure: line 1298: apxs: command not found ./configure: line 1299: /: is a directory ./configure: line 1461: apxs: command not found configure: creating ./config.status config.status: creating Makefile config.status: error: cannot find input file: Makefile.in Through some research I've discovered that I need to modify my command: ./configure --with-apxs=/usr/local/apache/bin/apxs \ --with-python=/usr/local/bin/python But, /usr/local/apache/ doesn't exist, or so that's what it is telling me. If it doesn't exist, how do I create it with all the files needed, or if apache is located elsewhere on my VPS where would it be located? I'd also like to mention that I ran a command to install apache before this entire deal: yum install httpd so I assumed that was all I needed but apparently not (I am very new at all this server administration stuff so please be gentle) EDIT: This is the tutorial that I have been using to get this all set up: http://binarysushi.com/blog/2009/aug/19/CentOS-5-3-python-2-5-virtualevn-mod-wsgi-and-mod-rpaf/ I got stuck at the heading "Installing mod_wsgi" Thanks for any help!

  Read the article

• Uninstall IIS on Windows 7

  - by CJM

  I've just rebuilt my development machine and installed IIS. I then installed the Web Deployment tool and used this to restore my previously-backed-up websites to the clean machine. Unfortunately the restoration didn't work correctly/fully. I couldn't easily correct the problem, so I decided to uninstall/reinstall IIS and recreate the sites manually. I uninstalled IIS and rebooted, but there was still plenty of stuff left around such as various files in /windows/system32/inetsrv/ which I tried to delete manually (with limited success!). I rebooted again and tried to reinstall IIS - it reported an error (no meaningful message) and requested another reboot. The event log includes the following errors: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/gallery for site 1. The site has been disabled. and Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. I'd like to avoid another rebuild. Can I completely remove IIS, such that I can reinstall it from scratch? Or can I 'fix' the current setup so that IIS will reinstall over what is already there?

  Read the article

• Sharing files between 2 different routers

  - by Chris

  I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

  Read the article

• nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

  - by user167328

  I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

  Read the article

• Basic Apache setup is not seeing my site

  - by Jakobud

  Sorry that is a horrible thread subject, but I cannot think of a better more descriptive subject. We are running a Fedora 11 server that is currently hosting some CRM on it. I want to use a VirtualHost directive to add another site to the server. So I created this conf: /etc/httpd/conf.d/mysite.ourdomain.com.conf And here is the content: <VirtualHost *:80> ServerName mysite.ourdomain.com DocumentRoot /www/mysite ServerAdmin [email protected] ErrorLog /var/log/mysite.ourdomain.com-error.log CustomLog /var/log/mysite.ourdomain.com-access.log common </VirtualHost> I restarted apache, getting the following warning: [warn] NameVirtualHost *:80 has no VirtualHosts From what I read, this warning is not related and I can ignore it and my site should still be up and running, correct? (I'll troubleshoot this error later if so) Well I have our DNS server setup to point mysite.ourdomain.com to goto this server. I can ping it and it points to the correct LAN IP, etc.. Now when I try to access it in the browswer I get nothing. It just says Connecting... and never gets there. If I try mysite.ourdomain.com or the IP address, neither one doesn't get there. It's a very simple and basic apache setup so I'm not sure what I'm doing wrong... Like I said, the other thing that is running on this server is a crm and it's .conf looks something like this: Listen x.x.x.x:443 <VirtualHost x.x.x.x:443> ServerAdmin [email protected] ServerName crm.ourdomain.com ErrorLog /var/log/httpd/ourdomain/crm-error.log CustomLog /var/log/httpd/ourdomain/crm-access.log common DocumentRoot /www/ourdomain/crm <IfModule mod_dir.c> DirectoryIndex /index.php </IfModule> </VirtualHost> There is also some LDAP authentication stuff in that config but I left it out cause I assumed it wasn't necessary to post. Anyone have any clue where I should start or what settings I can post from httpd.conf that would help?

  Read the article

• ATI HDMI Audio disappears in Windows 7 when a TV is connected

  - by jsalonen

  So far I have unsuccessfully googled for HOURS with no luck fixing this very annoying problem. The settings is the following: I have PC running Windows 7 RC (64-bit) Video card is a ATI Radeon 4850 series card (Sapphire HD 4850 512MB to be exact) The video card has HDMI out with built-in audio chip I have an HDMI cable connecting the PC to a TV (Sony Bravia series) The problem is that when I connect the HDMI cable to the TV, the ATI HDMI Sound output device disappears completely from the list of playback devices in Windows. As a workaround I can restore the audio by re-installing the HDMI audio driver. However, when I disconnect the TV the driver disappears again. So basically, every time I want to watch stuff on my TV, I have to reinstall audio driver, which of course is VERY annoying. EDIT: I have figured out that I do not need to re-istall the HDMI audio driver to restore sound; I only need to reboot my computer with the HDMI cable plugged in to restore the audio driver. This suggests that the problem has something to do with information passed from TV to computer, which makes my HDMI Audio driver disappear. Are there any other, more elegant workarounds for this problem? All help is much appreciated!

  Read the article

• Dedicated server automatic backup solution

  - by Luigi

  I have a dedicated Ubuntu web server in a cloud environment, and I am looking for a nice way to do automated backups. I would like to backup some directories with web apps, and all my MySql databases. As for destination: make snapshots every two hours localy, and every six hours to a remote ftp server. Also delete backup archives older than seven days(localy + ftp), and notify on any problems by email. Now to achieve some of this functionality I use cron + shell script, and http://www.mysqldumper.net/, but really that doesn't answer my needs. Mysqldumper doesn't know automaticly about new databases, and shell script does not notify on problems. It's something I have to check out from time to time, and i don't have trust for. I googled a while, and seems like most people solve this stuff with shell scripts. Is this a method you can trust? Are there any web-gui tools, I'm missing? Maybe there is a smarter startegy for doing this? I'm a little bit confused.

  Read the article

• Volume licenced copy of MS Office 2007 shows "Non Commercial Use" in title bar

  - by Linker3000

  I have just removed the demo copy of Office 2007 preinstalled on a new laptop and replaced it with an install of the full professional edition downloaded from the MS Volume Licensing site and installed one of our volume licence keys, yet the apps (Word etc.) show "Non Commercial Use" in the title bar, which is what usually happens in the Home and Student edition. I have tried: Deleting the Office registration keys in the registry and using one of our other Office 2007 volume licence keys (we have 7) when prompted to re-register Uninstalling Office completely and reinstalling it from a newly-downloaded ISO burned to CD and also from a compressed file that installs from hard disk/USB stick (both from Microsoft - no dodgy stuff) Yet the non-commercial message persists. Although it's a cosmetic issue, the laptop is going to be used for customer presentations and so the sales person is rightly concerned about the image this portrays. I presume there may be something floating around the registry or in a file somewhere but I can't find it. Articles I have found elsewhere just refer to the message being related to the use of a Home and Student licence key, which is 100% not the case. Any thoughts? Thanks.

  Read the article

• Hardware, network infrastructure for runnng gaming server nd on VirtualGL

  - by archer

  Foud nice project VirtualGL (http://www.virtualgl.org/). Tried to run 3D fames (EVE Online, Prototype) on server and display the output on thin client using 100Mbps network. Server: Gentoo Linux on AMD Phoenom II x6 3.4Gz, 8GB RAM, 2x NVIDIA 9800 GTX in single session with display resulution 1024x768 on client. Performance is very promising. Going to increase network speed to 1Gbps (using either Ethernet or Fiber) and run 5-6 clients simultenously. My questions are: a) what would be better for network - 1Gbps Ethernet or Fiber (clients are distributed in max 20m around server)? Is that a must to use managed switch for better network performance? b) Should I increase number of video cards to put in SLI on server (going to use Gigabyte GA-890FXA-UD7 which has 6 PCIExpress slots [2 x4, 2 x8 and 2 x16]). Will it impact performance significantly. If I need to increase the number of video cards - what would be better - put 2 banks of video cards with 3 in bank using SLI, or 3 banks with 2 in the bank? Would linux recognize that and properly use all banks of video cards? c) any suggestions on good thin clients supporting 1920x1080 HDMI video and 1Gbps network I understand that my questions can't be answered clearly (unless someone already managed to use this kind of stuff ;)) although any suggestions would be very helpful.

  Read the article

• Dell fumbles OpenManage installation process, forgets to write documentation?

  - by bwerks

  Hi all, I'm setting up a Dell PowerEdge 2950 for a small business, and I've just spent a while with Dell OpenManage Server Administrator 6.2, trying to clear the installation process of errors before I execute it. Right now I'm getting the following warning from the installer. The installer has detected that the HTTPS listener is not configured for Windows Remote Management. You can either configure the HTTPS listener before installing Remote Enablement, or install Remote Enablement now by selecting the "Custom" installation screen and configure the HTTPS listener later. See the "Remote Enablement Requirements" section in the "Dell OpenManage Installation and Security User's Guide" for information on configuring the HTTPS listener. Note: Remote Enablement is required to manage this system from a remote Server Administrator Web Server and is applicable only for those systems that support Server Instrumentation. Click here to configure HTTPs Listener for Windows Remote Management. The italicized line is a link, which executes...something...via cmd, and doesn't seem to help the problem. Not knowing exactly what to do here, I consulted the documentation. I read through the Setup and Administration section of the User's Guide, but all that it contained was a weird primer on role-based security and some SNMP stuff. The next section skips installation entirely and moved on to features of the suite. Thinking myself crazy, I consulted the readme, which told me that for installation I should consult the "Dell OpenManage Installation and Security Version 6.2 User's Guide" which not only doesn't exist in the documentation, but also not in all of google? Soo yeah, if anyone is familiar with this problem, drop me some knowledge!

  Read the article

• How to read an Excel file, get and set the information using POI

  - by user1399713

  I'm using Java to read a form that is in an Excel spreadsheet that the user fills in with information about geometric shape. Ex: Shape :_________ Color :_________ Area: _________ Perimeter:________ So far the code I have can I can read what I want in the form and print out the values of Shape, Color, Area, Perimeter. public class RangeSetter { /** * @param args * @throws IOException */ public static void main(String[] args) throws IOException { FileInputStream file = new FileInputStream(new File("test2.xls")); //C:\Users\Yo\Documents // Setup code String cname = "Shape"; HSSFWorkbook wb = new HSSFWorkbook(file); // retrieve workbook // Retrieve the named range // Will be something like "$C$10,$D$12:$D$14"; int namedCellIdx = wb.getNameIndex(cname); Name aNamedCell = wb.getNameAt(namedCellIdx); // Retrieve the cell at the named range and test its contents // Will get back one AreaReference for C10, and // another for D12 to D14 AreaReference[] arefs = AreaReference.generateContiguous(aNamedCell.getRefersToFormula()); for (int i=0; i<arefs.length; i++) { // Only get the corners of the Area // (use arefs[i].getAllReferencedCells() to get all cells) CellReference[] crefs = arefs[i].getAllReferencedCells(); for (int j=0; j<crefs.length; j++) { // Check it turns into real stuff Sheet s = wb.getSheet(crefs[j].getSheetName()); Row r = s.getRow(crefs[j].getRow()); Cell c = r.getCell(crefs[j].getCol()); if (c!= null ){ switch(c.getCellType()){ case Cell.CELL_TYPE_STRING: System.out.println(c.getStringCellValue()); } } } } What I want to do is to create a method that gets the that information and another that sets it. So far I can only print to the console

  Read the article

• Why a 10 years old software still is so slow even today?

  - by Cawas

  I just noted this question due to a game (which happens to be Diablo 2), but the matter of fact is: why is my brand new mac book pro, made in 2009 with latest technology (tho it's the cheapest one) can't rival my computer which used to run this much faster back in 2000? Really, it was much faster on my AMD K6 450 back in those days, and I could even run two clients at same time with no slow down. I've always had the feeling this machine was slow, but this is a very odd way to attest it. Granted, the machine is smaller, runs on wifi and "boots" way faster thanks to sleep mode. But other than that, what have we evolved after all?! I'm pretty sure this shouldn't be graphical card's fault. Sure if I buy latest technology it will run fast, and probably most people here can confirm this and won't even understand my question. But the thing is, all the hardware is supposedly much faster and better than the stuff from 10 years ago. The software and operating system became more complex, but also more well refined. Now I'm trying a piece of software that is actually 10 years old and it's not getting any better results! Why?

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• Amazon CloudFront and EC2: Global Load Balancing

  - by Matt Rogish

  We have an app that is going to store and serve up a decent amount of data in S3 to a global audience where latency should be minimized. So, we've been doing tests with Amazon CloudFront and have seen favorable results. However, we need a thin middleware layer (to do security etc.) and we'd like to put that in EC2. Due to security restrictions, this middleware layer will do the file streaming from S3/CloudFront: S3/CloudFront - EC2 - Clients We can geographically distribute the EC2 nodes (US East/West, and Ireland) but the problem is that a client in the EU would hit our US server and be fed data from there, thus rendering much of the performance benefit of CloudFront moot. I've been digging through the EC2 docs but I can't find a built-in way to get a geographically distributed version of EC2 a la CloudFront. Elastic Load Balancing sounds like the way to go, but I can't seem to find a way with that to direct based on routing... Preferably, we'd like to keep the amount of stuff outside of EC2/S3/etc. to a minimum (for obvious reasons). Any ideas how to do that within the EC2/S3 framework? DNS/routing tricks? Thanks!

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >