Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 349/761 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• Software Error Basics

  Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

  Read the article

• Can't get utouch to show available wifi networks

  - by kellrobinson

  I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

  Read the article

• How to Activate wifi in Toshiba Satellite C655?

  - by user4106

  I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

  Read the article

• Windows 7 -Can't get access to shared folder from one computer to another.

  - by Carbonara

  I have 2 windows 7 computers and i'm trying to share a folder (that I want password protection on) outside of the homegroup. Both computers are part of the same workgroup and I have the same user account/password combination on both computers plus I have password protected sharing turned on in the network and sharing centre along with file and printer sharing turned on. On computer 1 I have right clicked and selected that I want the folder shared. When I navigate via the network on computer 2 to computer 1 the shared folder shows up on computer 2 but double clicking on it to open it gives me an alert saying I don't have permission to access it, no option to type in the user name and password (according to the help files I shouldn't even need to type the password in if both computers have the same username/password anyway but would need it if I'm logged in as a different user). It's just a blanket denial of access.

  Read the article

• How to disable the Windows 8 lock screen, without disabling the password?

  - by zeel

  Windows 8 now has a slide-away lock screen like so many other OSes designed for a touch interface. However on a non-touch PC/laptop this is just an extra annoying step in logging in. There is an option to disable it, but this also turns off the password requirement. Is there a way to disable the lock screen, and have Windows wake up directly to the password entry screen? Often when pressing a key to hide it there will be a noticeable delay before password entry is accepted, and no indicator, so one can easily lose the first character or so that they attempt to type, thus failing the login attempt.

  Read the article

• My Router is fast when i reset it but slows down seconds later

  - by hglocke

  I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

  Read the article

• How do I know if I need a layer 3 switch?

  - by eekmeter

  We currently have a flat network with a bunch of unmanaged switches. I would like to use VLANs to segregate certain users like guests and I would like to use 802.1x. However, I'm not sure if what I need is a layer 3 or a level 2 switch. From what I understand a layer 3 switch does routing between VLANs. I don't think I need this at the moment but as I said I'm not sure since this is all new to me. What else would a layer 3 switch do for me? Our network is relatively small, less than a 100 users. What exactly does a layer 3 switch do that I can't get with a layer 2 switch? When would I need a layer 3?

  Read the article

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Firewall is blocking internet traffic to OpenVPN clients

  - by user268905

  I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux client machines which access the webserver and the Internet through the OpenVPN server. Also, external clients can access the OpenVPN from the Internet. The OpenVPN's server.conf is setup to use routing mode in udp, push DNS and routes to the network it is in so clients can access the webserver. Here are my very strict firewall rules. After connecting to the OpenVPN server, my clients can not access the Internet or the web server. When I allow FORWARD traffic to go through, it works just fine. The OpenVPN server has full internet connectivity. What firewall rule do I need to add to allow internet traffic to reach my clients?

  Read the article

• 1080p HD TV + what is minimum spec pc required to stream HD movie files to it?

  - by rutherford

  I want to stream hi-def (non flash-based) movies from my future minimum spec pc to my network-ready HDTV. What I want to know is a) when streaming from a computer (local wifi network), is the computer's cpu/video/ram resources used to the same extent as it would be if playing back on the computers local screen? If not what are the differences? b) So with streaming hd content what is the minimum spec processor I should go for, if i) only one TV is acting as client ii) two TVs are simultaneous clients.

  Read the article

• Why is Linux choosing the wrong source ip address

  - by Scheintod

  and what to do to let it choose the right one? This all happens inside an OpenVZ container: The Host is Debian/Wheezy with Redhat/OpenVZ Kernel: root@mycl2:~# uname -a Linux mycl2 2.6.32-openvz-042stab081.5-amd64 #1 SMP Mon Sep 30 16:40:27 MSK 2013 x86_64 GNU/Linux The container has two (virtual) network interfaces. One in public and one in private address-space: root@mycl2:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:775 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:32059 (31.3 KiB) TX bytes:56309 (54.9 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:80.123.123.29 P-t-P:80.123.123.29 Bcast:80.123.123.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.0.1.29 P-t-P:10.0.1.29 Bcast:10.0.1.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 The route to the private network is set manually: root@mycl2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 venet0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 venet0 Tring to ping others on the private network leads to the wrong source address been choosen: root@mycl2:~# ip route get 10.0.1.26 10.0.1.26 dev venet0 src 80.123.123.29 cache mtu 1500 advmss 1460 hoplimit 64 Why is this and what can I do about it? EDIT: If I create the route with (thanks to Joshua) ip route add 10.0.0.0/8 dev venet0 src 10.0.1.29 it is working. But according to man ip-route the src parameter should only set the source-ip if this route is chosen. But if this route is chosen then the source-ip would be that anyway.

  Read the article

• Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to

  - by Corey

  Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to a specific MAC address? I know the Linksys routers have a MAC filtering feature, but it is the opposite of what I need. It allows you to block access to a specific MAC address. I need something that will block all, but allow an exception. I'm dealing with some VOIP issues in my company's network, and I think the answer is to have a separate router on the network for my PBX to use. I want to make sure that other nodes are not allowed to access the Internet via this second router.

  Read the article

• problems establishing ssh connection

  - by Superbyte

  since two days I am facing a really weird problem. I have receantly installed ubuntu server 14.04 LTS on a workstation. It has a fix IP address, which I can successfully ping from other computers in the network. But when I try to establish a ssh connection from a windows computer via putty I get some strange errors, which I cannot fix. The Problem is that putty takes a really long time trying to establish a connection. After about 10 seconds I get the following error: Network error: Software caused connection abort But when I click the Restart Session option a several times after putty shows the error message, I can login in. But now comes the other problem. When the login appears on the putty console I type in the user, but it really takes a long time until I can type in the password to login. This is what I already tried: sshd: ALL in etc/hosts.allow commented line session optional pam_motd.so in etc/pam.d/login and etc/pam.d/sshd configured the firewall with: sudo iptables -A INPUT -p tcp --dport ssh -j ACCEPT checked if ssh server is listening on port 22 UseDNS no in etc/ssh/sshd_config I hope someone can help me, because this problem is really annoying. Thanks in regard

  Read the article

• Dell Inspiron7520 and ubntu 12.04 issues

  - by user91358

  I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

  Read the article

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• How to work with processes?

  - by Viesturs

  I have seen similar questions here, but I didn't get my answer. Maybe it's because I am new to all this and just don't understand. I want my app to work mostly as an indicator. And if user would start it again it would check if it is already running, if it is then give all the input data to that process and quit. So first I need to check if it is running. I saw the answer where you can make a file witch when the program starts and then check if it exists... But what if someone would delete it? Can't I just ask the OS if there is process named "myApp" or something? The next thing I don't really get is how to communicate with the process. How do I give it the input data and what is it going to do with it? Does it work just like starting a new app, through the main() method? I am trying to create this using Quickly. So it would be nice if you can give me some python examples or link to something like that.

  Read the article

• "The requested operation could not be completed due to a file system limitation" 3202

  - by user46529

  I backup SQL Server database and it fails BACKUP DATABASE dd TO DISK = '\backupServer\backups\dd.bak' WITH COMPRESSION, CHECKSUM, NOFORMAT, INIT , BlockSize = 65536 , BufferCount = 2200 , MaxTransferSize = 4194304 The backup size is 3TB and I have 6TB free space on bacup server. I am using backup parameters per SQLCAT whitepaper. Everything works ok when I backup to local HDD and it always fails when I backup to network share. After about 6 hours. Can't find why. Thank you. Yes. The backup over the network is fastest and saves me 3Tb of local disk space :) Thanks for pointing to the memory issue. I left 4Gb to OS and it worked!

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• IPv6 scope id issue with IE

  - by eych

  I have an ASP.NET website that works with Firefox because FF doesn't need the % in the scope-id to be encoded (%25). The website also works on the same machine using IE because I can leave out the scope-id. However, to access the website from another machine in the network, I need to add the scope-id to the IPv6 address. For some reason, using the scope-id doesn't allow an authentication cookie to be created, and the website keeps going back to the login page. Anyone using IE7+ to access an ASP.NET website on a network using IPv6 with an encoded %?

  Read the article

• Mac Snow Leopard Server DNS

  - by panomedia

  I have a Tomcat-driven application on my Windows server that I am planning to move to a MacMiniServer. Before I do this, I want to fully test the transition for licensing purposes. I have a Fire drive setup with Snow Leopard Server and the base app runs just fine BUT I need to be able to resolve the URL to my domain and not localhost. So, I figured I would setup panomedia.net in the DNS Server and also create an A record to my internal network IP so www.panomedia.net would dish out the same thing as localhost. The problem is: The Tomcat web app starts up going through panomedia.local and not through www.panomedia.net and My main network preference panel is still looking at my Comcast DNS search providers even though I put my local IP address as the only DNS Server and Search provider. I need to test this via an actual domain name before I commit to a 400GB data move. Can anyone help?

  Read the article

• New Servers Active Directory and Exchange

  - by user3164638

  I have 3 Dell PowerEdge server, each with 2 quad-core processors. I am going to bring this office out of the stone-age network (P2P, share files on a flash drive, emails through Google, etc) and set up Active Directory and Exchange 2013. Our needs are not that great at the moment - our staff consists of approximately 40 people, and our network may eventually be managed by an external company. We need only one domain for our emails (though we may serve emails for a few other partners domains as well). I was thinking of setting something up like this: Server 1: Primary DC. Active Directory and Exchange on separate virtual machines. Server 2: Redundant of server 1. Server 3: Shared resources, storage, backups, etc. How would you utilize 3 servers for an Active Directory / Exchange setup for a small/medium office? We do have plans to grow, so my solution must be scalable, though I'm not sure that I want to split permissions, though I'd consider it if that was something that could be changed on down the road.

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >