Search Results

Search found 26947 results on 1078 pages for 'util linux'.

Page 350/1078 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• VNC on Xen failure

  - by BCable

  The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• Creating a tar file with checksums included

  - by wazoox

  Here's my problem : I need to archive to tar files a lot ( up to 60 TB) of big files (usually 30 to 40 GB each). I would like to make checksums ( md5, sha1, whatever) of these files before archiving; however not reading every file twice (once for checksumming, twice for tar'ing) is more or less a necessity to achieve a very high archiving performance (LTO-4 wants 120 MB/s sustained, and the backup window is limited). So I'd need some way to read a file, feeding a checksumming tool on one side, and building a tar to tape on the other side, something along : tar cf - files | tee tarfile.tar | md5sum - Except that I don't want the checksum of the whole archive (this sample shell code does just this) but a checksum for each individual file in the archive. I've studied GNU tar, Pax, Star options. I've looked at the source from Archive::Tar. I see no obvious way to achieve this. It looks like I'll have to hand-build something in C or similar to achieve what I need. Perl/Python/etc simply won't cut it performance-wise, and the various tar programs miss the necessary "plugin architecture". Does anyone know of any existing solution to this before I start code-churning ?

  Read the article

• Force logout a user

  - by Mithun

  I When I logged into the machine as root and typed who to see which users are logged in, I found somebody else too logged in as root devuser pts/0 2011-11-18 09:55 (xxx.xxx.xxx.xxx) root pts/1 2011-11-18 09:56 (xxx.xxx.xxx.xxx) testuser pts/2 2011-11-18 14:54 (xxx.xxx.xxx.xxx) root pts/3 2011-11-18 14:55 (xxx.xxx.xxx.xxx) How can I force a root user at pts/3 to logout?

  Read the article

• sudoer scheme for another web developer that retains my future control of a virtual server?

  - by Tchalvak

  Background: Virtual Private Server I have a virtual private server that I'm looking to host multiple websites on, and provide access to another web developer. I don't care about putting too many constraints on him, though I wouldn't mind isolating the site that he'll be developing from other sites on the server that I will develop. The problem: retain control Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. I need him not to be able to: take away other admin permissions change the root password have control over other security/administrative functions I would like him to still be able to: install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc/ Other Standard Setups would be happily considered I've never really set up a good sudoers file, so simple example setups would be very useful, even if they're only somewhat similar to the settings that I'm hoping for above. Edit: I have not yet finalized permissions, standard, useful sudo setups are certainly an option, the lists above are more what I'm hoping I can do, I don't know that that setup can be done.

  Read the article

• autobench in ubuntu 8.10

  - by mamathahl

  Hi, I'm using ubuntu 8.10. I want to do benchmarking using autobench. I could install httperf by the command sudo apt-get install httperf I thought I should be installing autobench in the same way using apt-get. But the package was not found. Can anybody please suggest me what should I be doing in order make this "autobench" command work for me in ubuntu? Any help in this regard will be appreciated. Thanks in advance.

  Read the article

• How to configure vmware in this situation?

  - by Yousui

  Hi guys, Now I'm using a router to connect my computer to the Internet. I installed VMware Workstation 7 on my computer and installed a guest OS which is CentOS 5.3. Now I want to using putty to connect to the guest OS in my host computer, and I need the guest os can access the Internet too. How can I configure my host's network, guest os and my router? I have little knowledge about network, can you guys give me a step by step direction or something similar? Great thanks!

  Read the article

• Why /home folder is missing from my backup archive created by tar?

  - by Konstantin Pereyaslov

  So I'm doing full backup of my VPS using the following command (as root, of course): tar czvf 20120604.tar.gz / Everything seems to be fine, all files seem to appear in the list. The size of archive is 6 Gb and gunzipped version is 11 Gb which includes /home, because I totally have 11 Gb of data on VPS. But when I try actually to unpack archive, or open it using mc or WinRAR, there's no /home folder. And WinRAR tells 20120604.tar.gz - TAR+GZIP archive, unpacked size 894 841 346 bytes. It can't be WinRAR's bug, because when I type tar xzvf 20120604.tar.gz, /home folder isn't unpacked either. Why is /home folder missing from my archive? And what can I do to include it there? tar --version outputs the following: tar (GNU tar) 1.15.1

  Read the article

• Permission denied error while import to remote repository via svn...

  - by Usman Ajmal

  Hi I am importing my project to another machine on my LAN to the directory: /srv/svn/repos/my-repo where my-repo was created via svnadmin create option The permissions of /srv/svn/repos/my-repo are drwxr-xr-x 6 svn svn 4096 2010-04-19 17:30 my-repo I executed following command to import myProject files to my-repo on remote system sudo svn import -m "First import" myProject svn+ssh://[email protected]/srv/svn/repos/my-repo This command started 'Adding' files but gave following error after 'Adding' 7 files svn: Can't open file '/srv/svn/repos/baltoros-valgrind/db/txn-current-lock': Permission denied Any idea whats going on...? Thanks a lot

  Read the article

• Configuration Help for Sendmail Required

  - by Vinayak Mahadevan

  Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

  Read the article

• Ubuntu: Unsupported Sources

  - by Scott

  What kind of software is available in that source tree ? Also what is the best way to see what kind of software is available in a repository ? I have always reluctant to enable it because I didn't want to wind up with an unstable system.

  Read the article

• How to enable an external USD harddrive with ubuntu

  - by LarsOn

  Hello I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0 GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

  Read the article

• How to make a file editable by two different users in different groups?

  - by Koning Baard XIV

  I have a folder at /home/www/, and the owner is www, which is part of the www-group. I have another user, john, part of the john group. How can I chown /home/www/ to make it writable by both www and john? Thanks

  Read the article

• how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

  - by matchew

  I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

  Read the article

• Change Gnome popup menus / combo boxes mouse click behaviour

  - by pingw33n

  Whe right clicking in windows that have popup menus you can hold mouse button, wait until popup appears and release above the desired item to click it. This is different from Windows that have popup appear only on mouse release. And it leads to accident menu item clicking sometimes. Looks like the issue is there: https://bugs.launchpad.net/ubuntu/+bug/320259, https://bugzilla.gnome.org/show_bug.cgi?id=575071. Is there's any way to change popup appearance time at least?

  Read the article

• Issues while installing no machine setup (NX )

  - by TopCoder

  I am trying to connect to NX server from windows client but it reports following exception NX 203 NXSSH running with pid: 5404 NX 285 Enabling check on switch command NX 285 Enabling skip of SSH config files NX 285 Setting the preferred NX options NX 200 Connected to address: 10.43.51.77 on port: 22 NX 202 Authenticating user: nx NX 208 Using auth method: publickey NX 204 Authentication failed. I have regenearted the default_dsa.key on server and imported the same for client but still not working. Any solutions?

  Read the article

• postfix: Temporary lookup failure for FQDN

  - by Thufir

  I'm using the FQDN of dur.bounceme.net which I want to resolve(?) to localhost. That is, I want mail to [email protected] to get delivered to user@localhost. I've tried following the Ubuntu guide on this and seem to be going in circles a bit. root@dur:~# root@dur:~# postfix stop postfix/postfix-script: stopping the Postfix mail system root@dur:~# postfix start postfix/postfix-script: starting the Postfix mail system root@dur:~# telnet dur.bounceme.net 25 Trying 127.0.1.1... telnet: Unable to connect to remote host: Connection refused root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:[email protected] 250 2.1.0 Ok rcpt to:[email protected] 451 4.3.0 <[email protected]>: Temporary lookup failure rcpt to:thufir@localhost 451 4.3.0 <thufir@localhost>: Temporary lookup failure quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# grep telnet /var/log/mail.log Aug 28 00:24:45 dur postfix/smtpd[18256]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <thufir@localhost>: Temporary lookup failure; from=<[email protected]> to=<thufir@localhost> proto=ESMTP helo=<dur> Aug 28 00:24:58 dur postfix/smtpd[18256]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur> Aug 28 00:54:55 dur postfix/smtpd[18825]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur> Aug 28 00:55:08 dur postfix/smtpd[18825]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <thufir@localhost>: Temporary lookup failure; from=<[email protected]> to=<thufir@localhost> proto=ESMTP helo=<dur> root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~#

  Read the article

• Start multiple instances of Firefox; Xephyr rootless mode

  - by Vi

  How can I have multiple independent instances of Mozilla Firefox 3.5 on the same X server, but started from different user accounts (consequently, different profiles)? Limited success was only with Xephyr :1, DISPLAY=:1 /usr/local/bin/firefox, but Xephyr has no Cygwin/X's "rootless" mode so it's not comfortable. The idea is to have one Firefox instance for various "Serious Business" things and the other for regular browsing with dozens of add-ons securely isolated.

  Read the article

• How to make Shared Keys .ssh/authorized_keys and sudo work together?

  - by farinspace

  I've setup the .ssh/authorized_keys and am able to login with the new "user" using the pub/private key ... I have also added "user" to the sudoers list ... the problem I have now is when I try to execute a sudo command, something simple like: $ sudo cd /root it will prompt me for my password, which I enter, but it doesn't work (I am using the private key password I set) Also, ive disabled the users password using $ passwd -l user What am I missing? Somewhere my initial remarks are being misunderstood ... I am trying to harden my system ... the ultimate goal is to use pub/private keys to do logins versus simple password authentication. I've figured out how to set all that up via the authorized_keys file. Additionally I will ultimately prevent server logins through the root account. But before I do that I need sudo to work for a second user (the user which I will be login into the system with all the time). For this second user I want to prevent regular password logins and force only pub/private key logins, if I don't lock the user via" passwd -l user ... then if i dont use a key, i can still get into the server with a regular password. But more importantly I need to get sudo to work with a pub/private key setup with a user whos had his/her password disabled. Edit: Ok I think I've got it (the solution): 1) I've adjusted /etc/ssh/sshd_config and set PasswordAuthentication no This will prevent ssh password logins (be sure to have a working public/private key setup prior to doing this 2) I've adjusted the sudoers list visudo and added root ALL=(ALL) ALL dimas ALL=(ALL) NOPASSWD: ALL 3) root is the only user account that will have a password, I am testing with two user accounts "dimas" and "sherry" which do not have a password set (passwords are blank, passwd -d user) The above essentially prevents everyone from logging into the system with passwords (a public/private key must be setup). Additionally users in the sudoers list have admin abilities. They can also su to different accounts. So basically "dimas" can sudo su sherry, however "dimas can NOT do su sherry. Similarly any user NOT in the sudoers list can NOT do su user or sudo su user. NOTE The above works but is considered poor security. Any script that is able to access code as the "dimas" or "sherry" users will be able to execute sudo to gain root access. A bug in ssh that allows remote users to log in despite the settings, a remote code execution in something like firefox, or any other flaw that allows unwanted code to run as the user will now be able to run as root. Sudo should always require a password or you may as well log in as root instead of some other user.

  Read the article

• Uninstall Git completely on Ubuntu?

  - by Millisami

  I installed Git on Ubuntu Lucid (latest) manually as following. cd ~/tmp wget http://kernel.org/pub/software/scm/git/git-1.7.0.6.tar.gz tar -xzvf git-1.7.0.6.tar.gz cd git-1.7.0.6.tar.gz ./configure sudo make sudo make install Now, how can I completely uninstall it?

  Read the article

• Connect to SVN through Eclipse on Ubuntu

  - by Gene R

  We have a Subversion server running on an internal server. I'm trying to connect to it through SubClipse (Eclipse) on Ubuntu. When I enter the URL: svn://servername/site/trunk as I do from Windows. I get the following error: Error validating location: "org.tigris.subversion.javahl.ClientException: svn: Malformed network data" Anybody got any ideas?

  Read the article

• What do I need to do to set my computer as Default Gateway?

  - by Vaibhav

  We are trying to put together a box with dual LAN cards (let's say Outer and Inner), where the Inner LAN card is supposed to act as a default gateway on the network it is connected to. This box is running Ubuntu. The basic purpose for this box is to take messages generated on the inner network, do some work with them and forward them out the Outer LAN card to a server. The inner network is completely isolated with simply a regular switch connecting the Inner LAN Card with two other boxes. These other boxes either throw out multi-cast messages (which the Inner LAN Card is listening to), or send out unicast messages meant for the server which is not on this inner network. So, we need the Inner LAN Card to act as a default gateway, where these unicast messages will then be sent, and the code on the dual-LAN Card box can then intercept and forward these messages to the server. Question: 1. How do we setup the LAN Card to be default gateway (does it need some configuration on Ubuntu)? 2. Once we have this setup, is it a simple matter of listening to the interface to intercept the incoming messages? Any help (pointers in the right direction) is appreciated. Thanks.

  Read the article

• bash script - spawn, send, interact - commands not found error

  - by Sandeepan Nath

  I my shell script, I am trying to remove password prompt for scp command (as given in http://stackoverflow.com/questions/459182/using-expect-to-pass-a-password-to-ssh/459225#459225) and this is what I have so far :- #!/usr/bin/expect spawn scp $DESTINATION_PATH/exam.tar $SSH_CREDENTIALS':/'$PROJECT_INSTALLATION_PATH expect "password:" send $sshPassword"\n"; interact On running the script, I am getting errors spawn: command not found send: command not found interact: command not found I was also getting error expect: command not found also, then I realised the path to expect was not correct and expect was not installed at all. So, I did yum install expect, corrected the path and the error was gone. But not able to remove the other 3 errors still.

  Read the article

• What are your favorite Ubuntu blogs/news sites? [closed]

  - by Nick Meyer

  I would like to subscribe to some good sources of frequent updates on new software, updated software, and Ubuntu news in general. Unfortunately, most of the ones to come up on a Google search seem to be no longer actively maintained. What are your favorite sources? One site per answer, please.

  Read the article

• FreeNX Server w/ nxagent 3.5 not able to create shadow sessions

  - by Jenna Whitehouse

  I am running a FreeNX server on Ubuntu 11.10 and am unable to do session shadowing. I get the authorization prompt, but the shadow client crashes after. The NX server log in the user's .nx directory is as follows: Error: Aborting session with 'Server is already active for display 3000 If this server is no longer running, remove /tmp/.X3000-lock and start again'. Session: Aborting session at 'Mon Oct 1 14:26:44 2012'. Session: Session aborted at 'Mon Oct 1 14:26:44 2012'. This then deletes the lock file, which is the lock file for the initial Unix session and crashes out. Everything works for a normal session, and shadowing works up to the authorization prompt. I am using this software: Ubuntu 11.10 freenx-server 0.7.3.zgit.120322.977c28d-0~ppa11 nx-common 0.7.3.zgit.120322.977c28d-0~ppa11 nxagent 1:3.5.0-1-2-0ubuntu1ppa8 nxlibs 1:3.5.0-1-2-0ubuntu1ppa8 Any help is appreciated, thanks!

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >