Search Results

Search found 20360 results on 815 pages for 'capture output'.

Page 352/815 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Hard disk error

  - by Nadim A. Hachem

  I got this error during installation. "The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment." how can i fix this and what does it mean specifically? i'm installing via usb so it can't be the CD. the laptop is recent so it cant be an old HD.

  Read the article

• Ethernet not working in 12.04 (Dell Inspiron 14z)

  - by Izabela

  When I plug in a network cable, it is not recognized. The WI-FI is working properly, though. ifconfig output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1645 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:206840 (206.8 KB) TX bytes:206840 (206.8 KB) wlan0 Link encap:Ethernet HWaddr e0:06:e6:de:57:e7 inet addr:150.164.201.145 Bcast:150.164.201.255 Mask:255.255.255.0 inet6 addr: 2001:12f0:601:a921:98a2:3dd:3be8:c483/64 Scope:Global inet6 addr: 2001:12f0:601:a921:e206:e6ff:fede:57e7/64 Scope:Global inet6 addr: fe80::e206:e6ff:fede:57e7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23892 errors:0 dropped:0 overruns:0 frame:0 TX packets:14676 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30123226 (30.1 MB) TX bytes:2189050 (2.1 MB)

  Read the article

• Convert Currencies Dynamically using PHP, Google and cURL [closed]

  - by LizO

  I want to be able to allow users to dynamically change the currency of the products prices in my webstore, right there on the page. For example, 300 USD will change to 221.61 EUR when the user selects Euros from a dropdown. I found a few sites with PHP code for a calculator/input format (user inputs value and converted currency is output.) http://www.chazzuka.com/blog/?p=104 http://www.pixel2life.com/publish/tutorials/1166/currency_conversion_in_php/page-3/ I was hoping someone could help me figure out how to modify the PHP script. Thanks in advance.

  Read the article

• pulseaudio: no microphone configuration

  - by mitsch

  Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

  Read the article

• Unable to boot OS X after installing Ubuntu 12.04

  - by A G

  I installed Ubuntu 12.04 on my MB (aluminium late 2008). After installing Ubuntu I am unable to boot into OS X. Sequence of events: Install reFit on OS X Install Ubuntu on a partitioned drive. I also installed grub. Now when I boot my MB only the grub menu shows up. When I select OS X under grub I see a black screen for a while and the machine restarts (when selecting OS X 64 bit) or it hangs indefinitely(OS X 32 bit). Could you please help? Link to output of boot info script. http://paste.ubuntu.com/1028017/

  Read the article

• How to fix slow wireless with Intel 4965 AGN? [closed]

  - by mikewhatever

  Possible Duplicate: Slow wireless with an Intel 4965 We run Ubuntu 12.04, 32bit, with the current kernel 3.2.27-generic on an MSI EX700. I've already added the 11n_disable=1 tweek, without whcih, wireless has been unusable. Now, it works OK, but speedtest shows: Windows XP - down 11.68mbps, up 2.07mbps Ubuntu 12.04 - down 2.06mbps up 2.0mbps We've disabled ipv6, tried static and dinamic IPs, tried both swcrypto=0 and swcrypto=1 options, none of whcih made any difference. The problem may be the symptom of high packet loss. For example, here's the output of iwconfig after booting and testing the speeds: wlan0 IEEE 802.11abg ESSID:"amu" Mode:Managed Frequency:2.462 GHz Access Point: 00:78:9E:FA:32:C8 Bit Rate=54 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=58/70 Signal level=-52 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:11 Invalid misc:3627 Missed beacon:0 I've posted a help request before with lots of technical info and outputs.

  Read the article

• Upstart: sense of "stop on..." stanza when job is a task

  - by Binarus

  Hi, an upstart question (I think I have read all relevant man pages but could not find the answer there): What is the sense of using a "stop on ..." stanza in the definition of a job which is a task? The manuals tell us that such a job, after being started, just waits until its script (or exec stanza) is executed completely, and then stops automatically. Given that, what is the point in using "stop on ..." stanzas in such job definitions? For example, this is the job definition for Upstart's (very important) rc job in Natty 11.04 (leaving out comments and empty lines): start on runlevel [0123456] stop on runlevel [!$RUNLEVEL] export RUNLEVEL export PREVLEVEL console output env INIT_VERBOSE task exec /etc/init.d/rc $RUNLEVEL IMHO, the job, after being started by a runlevel event, will be stopped automatically as soon as /etc/init.d/rc $RUNLEVEL has finished. Thank you very much for any explanation!

  Read the article

• Getting wireless to work on Ubuntu 11.10 (on a mac machine)

  - by yayu

  I have a 2008 white 13.3 inch macbook that now solely runs ubuntu. However, I cannot get wifi or cable to work on it. Regarding the cable, it atleast tries to connect but eventually disconnects from the wired network. Here is the output for lspci (pastebin) I tried installing b43-fwcutter and firmware-b43 but get errors. (I loaded them from a thumb drive and tried sudo dpkg -i). I cannot understand these instructions from the documentation, as I cannot locate the pool directory. b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online. Note: In some versions (10.04 and 11.04 at least) there is not a /pool/main/p/patch/ If this file is missing then you don't need it. In this case you only need to install /pool/main/b/b43-fwcutter by following the instructions below.

  Read the article

• Only one resolution available in Xorg.conf

  - by Kévin Guilbeault

  I recently upgraded to Ubuntu 12.10 and when I try to change my resolution in NVIDIA X server settings, I only get the native one (1600x900). When I had 12.04 installed, all resolutions were available in the drop down list. My goal is to have twinview working again. I used to set my two screens to twinview and clones, using my HDTV resolution (1360x768) which was previously available in 12.04 for my laptop screen too. In 12.10, I tried to install all of the NVIDIA drivers available except the nouveau driver. I tried to add a new mode using Xrandr --newmode / --addmode, but it didn't work; it coudn't detect my output. I'd like to know if this is a known bug and if there's something to do with that. Thanks!

  Read the article

• Why isn't garbage collection being activated in my code? [migrated]

  - by Netmoon

  I have a foreach statement in my code, where each iteration calculates huge amounts of data and goes to the next iteration. I run this code, but when I read the log, I see there's a memory leak error. PHP.net says when this happens, using gc_enabled() is a good way to handle this. I've added these lines to last line of the foreach block: echo "Check GC enabled : " . gc_enabled(); echo "Number of affected cycles : " . gc_collect_cycles(); And this is the output: Check GC enabled : 1 Number of affected cycles : 0 Why do cycles exist, but the affected cycles is 0?

  Read the article

• How do I start the Workstation Service so I can use `net use`?

  - by nitefrog

  I have a Windows 7 machine that logs into a domain. The machine can net view and see the different shares, but when I try to use, net use * \\name\share, I get an error stating that the service is not started. Yet when I issue a net start, it states the service is already started. My other win7 machines work fine; they can see and use any of the shares. Is there a security setting that needs to be disabled or enabled? I really need to get this working, and I have no other ideas as the other machines have no problem accessing the shares on different systems. The error I am getting is , "The Workstation Service Has Not Been Started", but like I said other machines can connect fine, and when I issue a, "net start workstation", it states the service is already started. In addition the error number I am receiving is 2138. UPDATE: On the machine that is having issues. From the troubled machine if I issue a Net View \\name I can see all the shares on the machine I want to connect to. When I try to net use * \\name\sharename I get the error The Workstation service has not started. I have set both settings sc config lanmanworkstation start = auto and sc config lanmanserver start = auto on the Windows7 computer that is having issues. I have rebooted the computer and still no dice. I can net view any computer on the network and see all shares, but I cannot access any of the shares in which I can see. In the registry under the HKLM\System\CurrentControlSet\Services Both LanmanServer and LanmanWorkstation start is set to 2. Screen capture of net use and view: The Services: This is really weird. What am I missing? It has to be a security setting...

  Read the article

• Unable to use Hardware Acceleration for Radeon HD 6490M card

  - by user62004

  I've followed steps in this guide. Here is output of 'vainfo' command: libva: VA-API version 0.32.0 libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have Catalyst 12.6 driver installed (from debs). Also I've fixed switchable graphics bug, using this guide (STEP 2). I've tried to add 'LIBVA_DRIVER_NAME=xvba LIBVA_DRIVERS_PATH=/usr/lib/va/drivers' to /etc/environment and rebooted system, but the result was the same. PLEASE HELP! :) Thanks! :]

  Read the article

• SSD becomes hot, disk failure warning

  - by Aegluin

  I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

  Read the article

• How do I get a matching theme when I run a program as root?

  - by NES

  I use a Metacity theme in my Ubuntu installation. Unfortunately it isn't activated for programs with Gui that are started as root user and some other other certain programs like gufw (when i start gufw by commandline not as root)? It uses an old not very eyecandy Theme. For example for Gufw is gives the following output on commandline: /usr/share/themes/Finery/gtk-2.0/gtkrc:365: error: unexpected number `0', expected number (float) /usr/share/themes/Finery/gtk-2.0/gtkrc:365: error: unexpected number `0', expected number (float) What could be the reason, is there a way how to enable this theme also for these programs?

  Read the article

• 11.10 does not restore open apps in hibernate, works like shutdown

  - by jiewmeng

  I noticed that my 11.10 does not hibernate. When I hibernate, and starts PC, it doesn't restore all my open apps etc. Its like a shutdown ... why might that be? UPDATE Output from gsettings http://pastie.org/2926504 Using a vanilla Ubuntu Desktop 11.10 installed yesterday (no more from alternate CD, but problem still persists) I dont see any options in BIOS for S1, S3 or ACPI, are they hidden somewhere? I am using ASUS H67 Evo, I entered the Advanced mode of the BIOS, I still dont see those stuff ps-*.log files: http://pastie.org/2922774 GRUB entry: http://pastie.org/2922781

  Read the article

• Cocos2d: carom like game

  - by Raj

  Now I am working on carrom like game using cocos2d+Box2d. I set world gravity(0,0), want gravity in z - axis. I set following value for coin striker body: Coin body: density = 20.0f; friction = 0.4f; restitution = 0.6f; Shape Circle with radius - 15/PTM_RATIO Striker body: density = 25.0f; friction = 0.6f; restitution = 0.3f; Shape Circle with radius - 15/PTM_RATIO Output is not smooth, when I apply ApplyLinearImpulse(force,position); Coin movement looks like floating in air....takes too much time to stop... Which value of coin and striker makes it look like real carom?

  Read the article

• "Unable to connect" to getdeb.net, how do I fix it?

  - by Nirmik

  i want to know what this error means and how to fix it? The following is the output on the terminal- W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/Release.gpg Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/binary-i386/Packages Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/i18n/Translation-en_IN Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/i18n/Translation-en Unable to connect to archive.getdeb.net:http: E: Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• How do I figure out the minimum number of swaps to sort a list in-place?

  - by sova

  In-place sorting is essentially swapping elements without using extra storage, correct? How can I find the minimum number of swaps required for a list? A C D Q R Z E // input | | | > > > <<< // movement A C D E Q R Z // output Swapping: A C D Q R Z E swap Q with E, ACDERZQ swap R with Q, ACDEQZR swap R with Z, ACDEQRZ. done. 3 swaps. Shifting items left or right is essentially swapping, but I want the optimal number for plucking an item out of line and switching its place with another.

  Read the article

• Weird issue with iptables redirection

  - by skypemesm

  I am trying to redirect all incoming traffic on UDP port 5060 to port 56790, and all outgoing traffic from 5060 to the port 56789. I used these iptables rules: iptables -t nat -I PREROUTING -p udp ! -s localhost --dport 5060 -j REDIRECT --to-port 56790 iptables -t nat -I OUTPUT -p udp ! -s localhost --sport 5060 -j REDIRECT --to-port 56789 I listen on both ports using RAW SOCKETS after setting the interface to PROMISCUOUS mode using ioctl. I see packets ONLY on 56789 i.e.SENDING side, and I do not see any packets on 56790, while wireshark shows that many packets are delivered to port 5060. Why would this happen? Any ideas? Do you think it's a problem with iptables rules or something to do with raw sockets? [This is ubuntu 10.04 and iptables v1.4.4]

  Read the article

• How can I use smbclient to connect to Windows shares by hostname when a firewall is enabled?

  - by skyblue

  I can't connect to file shares on Windows computers using smbclient -L //hostname when the firewall is enabled. This occurs whether I'm using ufw (which allows outgoing traffic and replies back in with the default configuration) or iptables (where I'm allowing outgoing traffic and replies back in with iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT). However, smbclient -L //ip-address works whether the firewall is enabled or not. I also tested this against a Samba server running on Ubuntu and again smbclient -L //hostname does not work when the firewall is enabled, but smbclient -L //ip-address works whether the firewall is enabled or not. For reference, here are the iptables rules I used during testing: *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -d 224.0.0.251/32 -p udp -m udp --dport 5353 -j ACCEPT COMMIT

  Read the article

• Google Chrome no longer treats " Web Apps" specially

  - by Adrian Petrescu

  I'm running Google Chrome (Dev Channel), with the --enable-apps flag, in both OSX and Ubuntu. I have four or five WebApps installed, and they appear in the "New Tab" page just fine. The problem is that, before, when the feature first became available in the Dev Channel, the actual tabs hosting the webapps received special treatment; they would have 3D Dock-like look, and (more importantly) the tab bar would be hidden while using that tab. Sometime in the last few weeks, however, it seems that the special treatment just disappeared with one of the daily updates. The webapps still show up in the New Tab page, they still work in the sense that they capture all URLs going to that webapp, and they use the right icons; but they've basically become indistinguishable from just a regularly pinned tab. The two special features mentioned above have disappeared, on both Ubuntu and OS X. My questions are simply: a) Does this happen to anyone else? When exactly did it begin? b) Why did Google regress the feature? c) Is there any flag I can enable to get it back?

  Read the article

• dpkg snippet isn't working for me when fixing / installing dockbar

  - by user3924

  I'm trying to use this code from webupd8 to fix the problem I have. It seems it didn't work. sudo dpkg -i --force-overwrite /var/cache/apt/archives/smplayer_0.6.9+svn3595-1ppa1~maverick1_i386.deb Here is the output from my attempt to install dockbar : $ sudo dpkg -i --force-all var/apt/cache/archives/dockmanager_0.1.0~bzr80-0ubuntu1~10.10~dockers1_i386.deb dpkg: error processing var/apt/cache/archives/dockmanager_0.1.0~bzr80-0ubuntu1~10.10~dockers1_i386.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: var/apt/cache/archives/dockmanager_0.1.0~bzr80-0ubuntu1~10.10~dockers1_i386.deb Is there any way around this?

  Read the article

• Optical Character Recognition software recommendations?

  - by Tim

  I have seen some ebooks/papers that were apparently scanned from their paper versions but the text in the ebooks/papers can amazingly be copied out. I suppose the directly-scanned versions must have been processed by some Optical Character Recognition software. So I would like to know what are the recommended Optical Character Recognition softwares? Especially those that are either for Ubuntu or free? If those for Windows are far more superior, please let me know as well. I am particularly interested in those OCRs that can accept a scanned pdf file as input and still produce as output another pdf file that looks the same as the input one but with its text copyable. Thanks and regards! Please limit one software per answer

  Read the article

• Where does ntpdate get its settings from and what is the "no servers can be used" error about?

  - by wilhil

  When I run ntpdate on its own, I get the following output: 8 Jun 15:47:46 ntpdate[31251]: no servers can be used, exiting If I run it with the -q ntp.ubuntu.com switch, it seems to query just fine. I have been hunting through many files and the most relevant one I have found is /etc/default/ntpdate, however, even with NTPDATE_USE_CONF set to no, I just can't understand/see how this error is occurring Any ideas? Update-- been looking non stop... It appears that ntupdate-debianworks fine and is the actual command that makes use of /etc/default/ntupdate, but, this doesn't answer the main question and I still can't find it...

  Read the article

• HDMI signal interrputs after 10 minutes plugged in a TV

  - by desert_unbound

  Ubuntu 11.10, Dell Inspiron N4050, VLC, Jupiter I'm trying to watch movies through HDMI output on a TV, with VLC, with the notebook unplugged from AC (but with enough battery for 2-3 hours of use), just with TV display (the notebook display stays off) And from 10 to 10 minutes, the TV turns black, and according to the TV, the HDMI cable is unplugged. But using the touchpad makes the screen appear again. In "screen" options, on system settings, i've set the screen to never turn off, and never reduce brightness using battery. In "power" settings, i've set to not suspend when using battery. In Jupiter, i've set (while trying to watch the movie) to work in maximum performance. I'm pretty sure it's not VLC, because i've set it to override power options and screensaver options (and also im not using xscreensaver). Also the movie continues, when the screen is black Maybe there's something that i'm missing? When i plug the HDMI in the notebook, i use jupiter to change the display (using the option "external display only")... maybe is that ?

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >