Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 352/805 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• WiFi slow sometimes, reboot helps, how do I debug it?

  - by January

  Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• DTLoggedExec 1.0.0.2 Released

  - by Davide Mauri

  These last days has been full of work and the next days, up until the end of july, will follow the same ultra-busy scheme. This makes the improvement of DTLoggedExec a little bit slower than what I desire, but nonetheless Friday I’ve been able to relase an updated version of the tool that fixes a bug and add a very convenient option to make even more straightforward the creationg of execution logs: [bugfix] Fixed a bug that prevented loading packages from SSIS Package Store [new] Added support for {filename} placeholder in both Data Flow Profiling and CSV Log Provider The added feature allow to generate DataFlow profile logs and CSV logs that has the same name of the package that generated them, es: DTLoggedExec.exec /FILE:”MyPackage.dtsx” /LPA:"FILE=C:\Log\{filename}_{date}_{time}.dtsCSVLog" Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• About Web Server

  - by Chathura JAyanath

  I develop web sites. and i'm hope host my web site on my own web server. then i have ms win server 2008 computer with apache and IIS. i host my web site on iis. then it visible in local area network. now i want to open it to world. i have my own web url (www.myurl.lk). domain name provider ask about name server 1 and name server 2. i don't know how can i find my name server. can any one help me to do this? i already try this using upload web site to iis. but it's not work. it can see only local area network.

  Read the article

• How did what appears to be a virus get on my computer? (explanation of situation enclosed)

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Reinstall Windows on mass computers

  - by user791022

  At work there are about 40 DELL PC's - half of them are Windows Vista and other half are Windows 7. Some of the DELL PC's are 220s and 230s model. If I want to re-install Windows then I can use a Recovery/Recovery disk on any Dell PC's (220s or 230s). It take too long to complete the setup, for example - after re installing the Windows then I need to install the drivers, update windows, install IE9, create default users account and so on. It take about 3 hour to complete setup! I am looking for a solution Where I can create an Image of windows (with driver and completed setup) and then I use same Image it on any PC's at work? If one of the PC need reinstalling - I would like to reinstall via network (LAN) by grabbing the Image? Is there something that before booting into windows - computer check something via network which can download the Image?

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Why does the Mac OS X (10.6) Finder stop being able to connect to Windows computers?

  - by Drarok

  We have one Mac (a MacBook Pro Unibody) amongst our Windows machines which connects to the "server" (actually a Dell running Windows XP Pro) to access documents. This works just fine most of the time, but sometimes after waking from sleep, it cannot connect to any Windows computer on the network. There are no errors (nor even any messages) in the Console application when attempting to connect either by the Finder's network browsing, nor when using the "Connect To Server" menu. I have tried "Relaunch" on Finder, toggled File Sharing, disabled and re-enabled the Airport, but nothing makes the Mac able to connect again until I reboot it! Other computers can connect to the machines, so it is definitely the Mac at fault. Are there any workarounds that anyone has found? Is there perhaps a way to re-start the samba client?

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

  - by Pawel

  Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

  Read the article

• configure vpn so that it is not the preferred route

  - by pstanton

  Hi all, I recently re-installed XP on my PC. I had a vpn set up on the old system and remember being advised to change one setting so that it wasn't the preferred route for all network traffic. This was ideal as only connections to the target network would be made through the vpn and all normal traffic would go through the regular path unmolested. i remember thinking "why isn't this the default setting!?". now i've formatted my drive and lost the config for that vpn (besides host, username, passwd). does anyone know of the setting i'm referring to? thanks, paul.

  Read the article

• Rsync like windows backup tool

  - by Halfgaar

  I need to backup some windows machines and have been unable to find the proper tool. What I need is a tool that does efficient copying of changed files to a windows network location, like Rsync does. In turn, the server will then back that up using rdiff-backup, a tool which does very clever incremental backups. Right now I'm using windows' 7 included backup feature, but I really don't get that. It's too much off-topic, but it doesn't suffice (seems buggy as well). I looked into Amanda, but as soon as it wanted to install MySQL, I aborted. I also tried Deltacopy, but unfortunately, I don't remember what the problem with that was... Any advice for an rsync like tool that just does daily syncs to a network location?

  Read the article

• How can I prototype my app better?

  - by uber_llama

  A few weeks ago I saw a story about a master app designer showing how he worked with good old pen and paper to do effective prototyping before writing code. I'm unable to dig up that story (and I think it was a video) but if you could recommend any other useful resources I'd appreciate them. I know roughly what I want to build, but want a useful framework for thinking about how the screens should flow together. The app I want to build is for the iOS platform, but I think the video might have been about creating a web app. Thanks!

  Read the article

• NAT and NGINX on the same server

  - by Morten

  I'm setting up a VPC cluster for my collaborative todo list application www.getdoneapp.com. To have my servers on the private network I need a NAT server so my servers on the private network can connect to the internet to receive updates and what not. The NAT server will consume an elastic IP address, so I'm wondering if I can just have that NAT server run nginx to direct traffic to my internal servers for HTTP. So the question is, is it a bad idea to run NGINX and NAT on the same server, or should I go for consuming 2 elastic IP addresses?

  Read the article

• Ubuntu: crypt user's home directory and protect from admin ?

  - by Luc

  I have the following problem: I need to run some scripts on a Ubuntu machine but I do not want those scripts to be visible by anybody. What could be the best way to do that ? I was thinking of the following: create a particular user Add the scripts in this user's home directory Protect + crypt the user's home directory = Can I run the script from outside if the directory is crypted ? Can superuser see the content of the home dir ? Is there a right way to do this ? UPDATE I thing the best way would be that root own those scripts. In this case I would need to allow an another user to modify the network configuration. Is it possible to ONLY provide network rights to a user ? (via sudo or else)

  Read the article

• Distribute Nagios to reduce false alarms

  - by GDR

  I'm currently running a single Nagios instance. From time to time, I'm getting false alarms about timeouts - for example, it says that HTTP is down on some server, but when I open it in my browser several seconds later, it loads fast, and in general there is no trace of an error. What can I do to reduce such false alarms? I'm guessing that it's because of transient network issues on my monitoring server. I guess that setting up another monitoring server on a different network would greatly help, but how do I plug it into Nagios? Is it at all possible with Nagios or do I have to switch to another monitoring system? I like my configs and, if possible, I'd like to stay with Nagios or something compatible (Icinga?)

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Virtual Windows Servers and Pagefile location [closed]

  - by Luke Puplett

  Considering that Windows makes heavy use of the pagefile even with huge amounts of RAM available, is it not best to have this pagefile on the fastest disk possible as close to the virtual systems as possible? I'm thinking, RAM disk. Where I work, storage for VMs is out on a NAS/SAN. I'm worried that so much memory access is having to go across the network! As a side, I think its about time MS got rid of paging and told us to buy more DIMMS. UPDATE So this question has been downvoted??! Accessing a local spindle is C40,000 times slower than a DIMM, so going over the network will be even slower for hard faults. I don't know why I got the downvote, I'm certain that this is an issue unless there's some other mechanism in ESX/HyperV that manages this.

  Read the article

• windows cache not working as it should?

  - by piotrektt

  I run windows 2012 server with data center. The setup is with 60GB of RAM. I have one file shared on VHD and when I copy this file locally the RAM cache is all used up but when multiple computers connect to the share it the cache is not used. The network is 8Gb. The whole network is around 200 computers that need to read that one file but on this setup only 10 connection kills the server. Is there any way to check what is going on? What other solution can I use to manage cache in windows?

  Read the article

• internet speed and routers are controlled by whom

  - by Ozgun Sunal

  i need to learn two things. each is related to other a bit. The first one is, while our LAN speed is usually 100 Mbps or at gigabit levels(very big compared to WAN speeds), WAN speed for instance DSL connections are far less than this. However, we are able to download huge files at those Mb speeds. Isn't this weird? [my real concern is why WAN speed is lower than LAN speeds] Who controls those routers around the large Internet? (while we, as web clients are connected to Internet, packets travel through those routers to the destination network/s).But, are those routers all inside the ISP network and if not, who controls those large numbers of routers?

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Windows 2003 server RRAS on VPC

  - by Saif

  I'm trying to setup a L2TP VPN server(to give user access on to all my VPN instance) on a Windows 2003 instance running on my VPC. While trying to enable RRAS I'm getting error, "less than two network interfaces were detected on this machine". Eventually it's because there's only one network interface available, the which has private IP. I have elastic IP assigned to this instance as well. But RRAS can't see this. What should I do to RRAS to be able to see the interface with elastic IP?

  Read the article

• Domain users sometimes cannot access our NAS

  - by Natalie

  I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >