Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 351/805 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

  • Slow upload to Server 2008 DC, Downloads work as expected

    - by Anthony
    I have a Windows Server 2008 Domain Controller that I run as a do-it-all server. It has a GbE connection to the network and to every machine on the network. Downloads from the server file shares work as expected, between 70MB/s and 80MB/s to all the machines. However, when I try to copy files back up to the server, speeds fall to 7MB/s-10MB/s. I've disabled flow control and large send offload properties on all the NICs. I had this problem before and managed to fix it through some properties changes, but like an idiot, I never documented my fix and have since moved to a new server. Any ideas what I need to do to get the speeds to be more symmetric? EDIT: Remote differential compression is also disabled.

    Read the article

  • Remote desktop to multiple windows machines on a LAN with dynamic IP

    - by kevyn
    Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

    Read the article

  • eSTEP Newsletter for the technical EMEA partner community

    - by mseika
    We are pleased to present to you the first issue of the eSTEP Newsletter, which is dedicated to support the technical EMEA partner community in the effort to provide more information on what is going on within the corporation, what is the technical news regarding Hardware, events and all the important things which we think may be of interest to you. Invitation: STEP TechCast: Oracle Solaris 11 Express Get an insight on how Oracle Solaris 11 Express has raised the bar on the innovation introduced in Oracle Solaris 10. Learn about the new integrated features such as: network based package management tools improvements to built-in virtualization new virtualised network architecture security enhancements file system evolution  Learn how Oracle Solaris 11 Express provides greatly decreased planned system downtime, performs a completely safe system upgrade, achieves an unprecedented level of flexibility for application consolidation, and provides the highest levels of security in your datacenter. Date and time: Thursday, 7. July 2011, 13:00 - 14:00 CEST Speaker: Joost Pronk van Hoogeveen Target audience: Tech Presales Webcast Coordinates: You will find the coordinates in the eSTEP portal under the Events tab. Use your email-adress and PIN: eSTEP_2011 to get access. We are happy to get your comments and feedback.

    Read the article

  • Windows 7 - Remote Desktop - multiple credentials

    - by w-
    Hi, My home network consists of a couple XP machines and a windows 7 box. One of the XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, i just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In windows 7, it seems to store credentials for a box based on machine name. i.e. i can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box? thanks

    Read the article

  • Opening Word documents from IE LAG Windows 7 IE8

    - by Steve McCall
    Hi, I'm having a lot of trouble opening documents from a network share in word using IE. The documents are located in a network share which is mapped to a virtual directory. The documents are accessed by URLs that link to the virtual directory. There is now a huge lag (sometimes up to a minute or two!) from when clicking on the link to the document opening in word. The 'loading disc' in IE just keeps spinning and nothing happens. Sometimes a pop up box appears with 'opening file - (address)' but it still takes ages. I've tried setting in the registry to open the files directly in ie but to no avail. Anyone have any ideas? Steve

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • Broadcom Wireless Issues in Lubuntu 14.04

    - by ratxinxaxcage67
    I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

    Read the article

  • Accessing shared resource on local computer from users of different physical location

    - by Joe
    Sounds like easy task to some but such a difficult task for me to do... The main requirement for this task is to setup something in offices located on different locations, so (1st question) users are able to log on to the domain without VPN when they are in one of the offices. Additionally, (2nd question)how they can log on to the domain server when they are on the road like in a starbuck, what do they have to do to connect to domain after VPN connection are successful. also it's my understanding that, we can't share resource from computers on different network segments, (3rd question)what is the best solution to bridge/combine two network segments(two office in different locations) so computers of different location can see each other. Thank you in advance for any response.

    Read the article

  • unable to connect to remote sql server from SHDSL router

    - by user529265
    Got a new leased line network to our office that came with a SHDSL router (Watson). Currently, we are unable to use Sql Server management studio to connect to remote Sql databases. It errors out saying A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (Microsoft SQL Server, Error: 64) I logged into the Watson management panel and unblocked all the ports for TCP traffic (specified the range as 0 to 60000 and UDP as well - this include 1443 required for connecting to SQL Server). The router is the only thing that has changed. We are able to connect to it from other networks just fine. Is there something we are missing here. Any help would be greatly appreciated.

    Read the article

  • All internet requests in Windows time out

    - by Brandon
    So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

    Read the article

  • Can connect to WAN via PC but router doesnt.

    - by user16877
    I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

    Read the article

  • servers connected to a poweredge 6248 receive traffic for their 'neighbours'

    - by Hannes
    In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

    Read the article

  • Wireless is connected but no internet when PC Turns on

    - by mhesabi
    I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

    Read the article

  • Windows DFS Limitations

    - by Phil
    So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

    Read the article

  • Can a consumer wireless router act as both a wireless client and access point?

    - by glibdud
    I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

    Read the article

  • How to create a VPN between a Host and VMWare VMs?

    - by Anindya Chatterjee
    I have a set of machines as follows My home laptop running Win7 Ultimate with internet connection. A vmware workstation vm running Windows Server 2003 Standard edition server in my laptop w/o internet connectivity Some of my peers' machines connected to internet I want to create a VPN with these machines, provided the VM will not have any direct internet connection and my peers should able to connect to the SVN server application running on this Win2003 server VM. Can anybody please suggest me how to setup this network, what software I need to install in both physical machine and vm, what kind of network connectivity should be there between vmware guest and host machine? EDIT: I deliberately don't want to connect the VM with internet. The host will work more of a gateway of the VPN connection for the VM.

    Read the article

  • Bridging two connections in windows 7

    - by Serban Razvan
    I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

    Read the article

  • New windows from the dock in Gnome Shell

    - by Andrea
    I am using Gnome Shell on Ubuntu 11.10, and I frequently use workspaces, as the shell encourages to do. My only complaint is that it is slow to place different windows of the same program in different workspaces. What I would like to do: click on an empty workspace, click on the Nautilus icon in the dock and browse to the correct folder. Then click on another empty workspace, click on the Nautilus icon and so on. This does not work: the second time I open Nautilus, the dock lets me switch to the previous instance, which is almost never what I want. So I have to click on the Nautilus icon, open a new window, place it on a different desktop, switch to that folder and finally browse to the correct folder. Is there a way to simplify this flow? It would be even better if I was able to link a specific folder from the dock, or better yet to have something similar to a Unity lens, where I can choose between the most used folders.

    Read the article

  • How to route packets from Wi-Fi to Ethernet on OSX?

    - by Alexander Artemenko
    I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

    Read the article

  • Need a really simple client manage script to deliver graphics and revisions, please help?

    - by Mark R
    I am looking for a very simple client management script. The process flow of the script should be: Client orders (paypal etc) while giving specs on what they need given login details and thanked for their order backend for them consists of a 2 way communication. They ask questions we answer. We also upload the graphics here where they either accept them or as for revision. process complete. Now I cannot for the life of me find something as simple as this. It seems all the scripts out there are way too complicated. Does anyone know of one I can use to do this?

    Read the article

  • SSIS Tips & Tricks (Presentation)

    This has been a rather well used presentation title but it does allow a certain degree of flexibility, and we covered a good range of topics in my session at the UK SQL Server User Group in Cambridge last night. Thanks to all who attended. Here is the rather limited slide deck and the all important demo packages for download as promised. For reference, high level topics covered were BIDS Helper Inserts and Updates Transactions Script Debugging Data Flow Checkpoints I’ll update the post with a link to the Live Meeting recording when I get it. Presentation & Demo Packages (194KB) SSIS Tips & Tricks - Darren Green.zip

    Read the article

  • Getting VPN to work from Virtual PC

    - by strobaek
    Setup: Host is running Windows7. Virtual PC is a Windows Server 2008 running under VMWare workstation 6.5. From the Host I have a VPN to e.g. TFS and other resources. From the VPC I need to connect to e.g. a SQL server via the VPN. My problem is, that I cannot get a connection from the VPC. If I'm sitting on the corporate network, all is working fine (but then I don't have the VPN). From home - where the VPN is required - it does not work. I have two network adapters defined/configued. One as BRIDGED and one as Host Only. IF I change the one being BRIDTED to NATS I have no connectivity at all from the VPC. I have no problems connecting from my host to the VPC. Thanks.

    Read the article

  • WiFi slow sometimes, reboot helps, how do I debug it?

    - by January
    Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

    Read the article

  • One samba directory is very slow

    - by Tim Rosser
    We have a RHEL server running as a samba server for our Windows network which has been running fine for ages. All of a sudden this morning one specific folder became really slow and sometimes inaccessible. It's the /home/ directory (containing all of the user specific stuff, like their windows desktops, documents etc). It's not only really slow over the network, but when I try to use ls to view the directory it just hangs. I'm getting loads of messages like the following in /var/log/messages Mar 20 09:53:32 zeus smbd[32378]: [2012/03/20 09:53:32, 0] smbd/service.c:set_current_service(184) Mar 20 09:53:32 zeus smbd[32378]: chdir (/opt/shares/home/tim.rosser) failed

    Read the article

  • I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

    - by Bong Paduano
    I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

    Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >