Search Results

Search found 12775 results on 511 pages for 'remote validation'.

Page 354/511 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

• smartctl or hddtemp for xvda [on hold]

  - by HST

  I'm trying to check the state of the drives on a remote server running Debian wheezy. I'm using a software RAID10 on top of, I guess, xen, since the entries in /dev are /dev/xvda and /dev/xvdb But it I try smartctl -a /dev/xvda I get /dev/xvda: Unable to detect device type Smartctl: please specify device type with the -d option. I've tried various device type guesses, none work Similar problem with hddtemp, which reports ERROR: /dev/xvda: can't determine bus type (or this bus type is unknown) I've searched the smartmontools documentation, but can't find any discussion of virtual disks. . . How do I get behind the virtualisation to something smart tools or hddtemp can work with?

  Read the article

• zip being too nice (osX)

  - by stib

  I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi this all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

  Read the article

• ubuntu ssh does not connect

  - by bocca

  SSH won't be able to establish a connection to our server Here's the output of ssh -vvv: ssh -v -v -v 11.11.11.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 11.11.11.11 [11.11.11.11] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.1p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 133/256 debug2: bits set: 486/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '11.11.11.11' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug2: bits set: 497/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa ((nil)) debug2: key: /root/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug3: no such identity: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GTK_RC_FILES debug3: Ignored env WINDOWID debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env GNOME_KEYRING_SOCKET debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env DESKTOP_SESSION debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug3: Ignored env GNOME_KEYRING_PID debug1: Sending env LANG = en_CA.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env HISTCONTROL debug3: Ignored env SPEECHD_PORT debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_confirm: type 99 id 0 debug2: shell request accepted on channel 0

  Read the article

• what causes drops in apache throughput?

  - by Robbie Mckennie

  i was poking around in the windows task manager, and i found this cool network throughput graphing thing. so i wanted to see it max out, so i started downloading a 1.8gb image (from the localhost to a remote system). but, much to my surprise, it looked like this: i count 16 dips, so i divided the 1.8gb into 16 and i got 115mb. then i looked up the mtu of ip, and i knew the mtu of ethernet from my reading, both far smaller than 115mb. and since tcp is connection orientated, it doesn't have an mtu.

  Read the article

• Just installed Sql Server 2008 and cannot access it

  - by Mendy

  I just install Sql Server 2008 on a new server and I cannot connect to it. I'm trying to connect using Windows Authentication to the localhost but I get the following error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476

  Read the article

• XCA: sign IPsec certificates with own CA

  - by sbrattla

  I'm trying to establish a LAN to LAN connection through a VPN tunnel. There's a Zywall at the remote office which will be responsible for establishing a connection to a Draytek at the main office. I'm able to establish the connection if I use shared keys, but I'd like to use certificates instead. I've downloaded the XCA application for Ubuntu which allows me to first create a CA certificate, and then sign "certificate signing reqests" using this CA. However, I'm uncertain if I am doing things right. More specifically<, which basic keys/extended keys should the CA certificate and the certificates themselves have? Right now I just skip selecting any keys at all, but is that right? All hints and help appreciated!

  Read the article

• gitosis always asks for git password

  - by Cylindric

  I've just followed the simple gitosis install instructions on an Ubuntu server, such as these http://blog.agdunn.net/?p=277 On the server I log in as "mark", and into /home/mark/.ssh/ I copied my keyfiles id_rsa and id_rsa.pub from my laptop. I used that id_rsa.pub when initialising the gitosis stuff, and can happily connect locally when logged in as 'mark'. From my laptop though, where I have the same keys, I can't connect. I just get an error: git clone git@support:gitosis-admin.git Initialized empty Git repository in u:/gitosis-admin/.git fatal: The remote end hung up unexpectedly The server is Ubuntu 9.04, the client is a Win7 laptop with Cygwin and WinSysGit.

  Read the article

• Is there a way I can use $PATH as defined by my bash profile?

  - by Adam Backstrom

  I spend most of my day ssh'd into servers. I have a series of aliases/functions/scripts that allow me to type p hostname from the terminal and execute GNU screen(1) on the remote side, using the following command: exec ssh hostname -t 'screen -RD'` I've only recently noticed that ssh -t does not get my custom $PATH. Here's some terminal output: adam@workstation:~:0$ sh server 'echo $PATH' /home/adam/bin:/usr/local/bin:/bin:/usr/bin:/opt/git/bin:/opt/git/libexec/git-core adam@workstation:~:0$ ssh server -t 'echo $PATH' /usr/local/bin:/bin:/usr/bin Connection to uranus.plymouth.edu closed. My biggest problem is my custom aliases only try to execute screen, since I can't guarantee an absolute path, and my $PATH is structured so the shell should find the correct one. If my $PATH settings aren't honored, my scripts don't work. Is there a way I can use $PATH as defined by my .bashrc/.bash_profile? I believe PermitUserEnvironment is disabled.

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• Ports do not open after rules appended in iptables

  - by user2699451

  I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

  Read the article

• Options for installing software on Amazon EC2 Windows instances

  - by gareth_bowles

  I've been running Linux servers on Amazon EC2 for a while now; the experience has been great. I've recently needed to bring up a Windows server to run some Windows-only software that our product needs to use, and am running into a problem figuring out how to install the software, which is only available on DVD. With Linux I can just install packages from a Web-based repository and take advantage of EC2's fast network throughput, but so far on the Windows instance I've had to upload my ISO images to EC2 and mount them from the Windows EC2 instance. For some reason I'm getting really slow upload speeds to EC2, even though the regular upload speed from our office is pretty good (around 7Mbps). I've also tried mounting the DVD drive on my machine as a local drive on the EC2 instance via Remote Desktop, and then running the software install from the local drive, but I run into the same slow upload speed issue. Does anyone have a better way to install software from physical media onto an EC2 instance ?

  Read the article

• upgrade from windows server 2008 r2 std to enterprise

  - by Ravi

  We recently had to upgrade our servers from Win 2008 R2 Standard to Enterprise. The upgrade method was DISM. After the upgrade, a lot of weird things started to happen. Though Windows says it's been properly activated, we lost 1) RDP settings (disappeared from the Remote Setting tab of Properties of My Computer) 2) The option to join a domain is grayed out 3) The server had to 2 physical processors 12 cores each. Now, task manager or windows sees only 1 processor (or only 12 cores) 4) the amount of physical ram on this sever is 32 GB (Windows reports only 4 GB are usable) Has anyone encountered this before ? Thanks Ravi

  Read the article

• rsync - Exclude files that are over a certain size?

  - by Rory

  I am doing a backup of my desktop to a remote machine. I'm basically doing rsync -a ~ example.com:backup/ However there are loads of large files, e.g. wikipedia dumps etc. Most of the files I care a lot about a small, such as firefox cookie files, or .bashrc. Is there some invocation to rsync that will exclude files that are over a certain size? That way I could copy all files that are less than 10MB first, then do all files. That way I can do a fast backup of the most important files, then a longer backup of everything else.

  Read the article

• Routing for IPSec tunnel

  - by Emre A

  For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface IP through tunnel while tunnel is up, there would be no problem at all but if the tunnel is down for some reason, it cannot be re-established as the routing for the IPSec gateway IP which is the same as outside interface IP is set to go through tunnel which it needed to re-etablish at that time. So, packets won't hit that IP. I tried adding another routing entry which has metric 2 through other gateway but it did'nt succeeded. So, what type of routing should I configure to reach that IP when tunnel is down. Thanks in advance.

  Read the article

• Alternatives to FTP

  - by Jack Hickerson

  I need to share files with clients outside of my business and unfortunately our FTP server is becoming too much of a hassle (with regards to clients use of an ftp client and creating password protected downloads based on customized account privileges) Essentially, I need: a remote service that mimics an FTP server with a web interface (easy for basic internet users to comprehend). over 100gb of storage file transfer size over 2gb customizable user account privileges (password protected downloads) secure storage and data transfer preferably less then $100/mo I have already looked into some services that almost meet my requirements (StreamFile.com, box.net, onehub.com, filesanywhere.com)- has anyone used a service they would recommend? cheers, jack

  Read the article

• Can iptables allow Squid to process a request, then redirect the response packets to another port?

  - by Dan H

  I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

  Read the article

• Monitor the shell activity of a user on your Unix system?

  - by Joseph Turian

  Trust, but verify. Let's say I want to hire someone a sysadmin, and give them root access to my Unix system. I want to disable X windows for them, only allow shell usage (through SSH, maybe), so that all operations they perform will be through the shell (not mouse operations). I need a tool that will log to a remote server all commands they issue, as they issue them. So even if they install a back door and cover their tracks, that will be logged remotely. How do I disable everything but shell access? Is there a tool for instantaneously remotely logging commands as they are issued?

  Read the article

• Instant messanger capable of offline messaging & tolerant of network interruptions

  - by Terry

  I am looking for an instant messaging solution to facilitate communications between recovery vehicles in remote rural areas. All the vehicles have internet connections, but they are intermittent depending on location. Ideally we'd like something that has the following features: Offline messaging: messages sent to clients who are offline will be delivered when they next come online, regardless of whether the sender is still online or not. Lightweight: CPU cycles are limited on the machines in these vehicles. A bloated solution will be an issue. Client platform is primarily win32, but support for osx/linux/mobile devices would be a bonus. Non-chatty: Bandwidth is a precious commodity for us, so services which use a minimal amount are ideal. Fault tolerant: We see plenty of packetloss and high latency, so whatever we use needs to be able to function in trying network conditions. I'm not fussed if we use a hosted platform like gtalk/skype/msn/icq/whatever, and likewise I can run a server if need be. Suggestions would be appreciated!

  Read the article

• failed to enable x11 forwarding

  - by Hunt

  I am trying to enable X11 forwarding on my server which is running on FreeBSD 7.1. I have a putty installed in my windows in which i have enabled X11 forwarding by checking on Enable X11 forwarding and specifying following parameter X display location localhost:0 after that i run putty and checked whether X11 is enabled or not by typing following command echo "$DISPLAY" or echo $DISPLAY but i am getting following error DISPLAY: Undefined variable. Even i have installed XManager but in that also i am getting following error The X11 forwarding request was rejected ! To solve this problem, please turn on the X11 forwarding features of the remote SSH server can anyone suggest me how to get rid off this ?

  Read the article

• Where to find and download a new suitable software? [closed]

  - by user63411

  Possible Duplicate: How do you find a new software to download? I see that the most time I spend on the computer I lose to just searching for suitable software. How you do it? What is your way to find software? Do you first go to a forum or google? Which torrent site? which P2P program, website or server? For example: "I need a software that have functions as a remote desktop and also lets you copy and paste (drag and drop - file manager). And after few hours searching on Google I downloaded LOGMEIN Pro2, but than I see that is just trial. So if I need to find alternative I will spend another whole day. Where to go? I am not an amateur but I need a better system. I need better introduction on how to find what is the suitable software.

  Read the article

• use of [!NOTFOUND=return] in nsswitch.conf

  - by Chris Phillips

  Has anyone come across the use of this config for passwd and groups config in nsswitch.conf? Where I'm working I've been told it's been shown to help situations where a group exists both locally and in ldap which was causing issues for group memberships etc. However this config seems to totally mess up nscd which will be aware of the groups and all their members but will not flip the data around to say the user is a member of all it's remote groups. Initially it seems, given a fully available environment, to be exactly the same as [FOUND=return] which is an implict default between stages anyway. However apparently a lengthy ticket with Redhat resulted in the recommended use of that configuration.

  Read the article

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

• How to establish the real-time communication between Shopping cart running MySQL and Internal System Running PostgreSQL [closed]

  - by Andrew

  I am thinking about the way of establishing some-sort of real-time connection between MySQLpowered shopping cart and internal system that is running on PostgreSQL. Could you give me some sort of insight on this topic? For example, I can write some sort of csv export application, then enable remote MySQL for over the internet connection and then import csv to mysql directly from PC. Or upload csv and run cron on server. But this way of import-export causing delays; so I would like to link databased (or some msort). I have never done it before and would like to hear some opinions about this. Another way "just a thought" might to implement triggers that would initiate the update process via csv; but again, I would like to avoid csv. Do you have any good advise? Maybe some specific examples?

  Read the article

• SQL Server 2008 is not accessible from Windows Server 2008 ?

  - by Albert Widjaja

  Hi, I have successfully configured Windows Server 2008 Enterprise SP2 with SQL Server 2008 Enterprise SP2 all 64 bit, however when I tried to access this particular SQL Server 2008 DB instance from another SQL Server 2008 SSMS in another Windows Server 2008 it failed ? what I did is to disabled the IPv6 IP address using the regedit but still the problem hasn't been fixed even after restart ? I have enabled the named piped as well but still no luck ? any help please ? Here's the error message: " A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) "

  Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >