Search Results

Search found 44747 results on 1790 pages for 'breadth first'.

Page 356/1790 | < Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >

• Host spreads wrong MAC Adress of router on the WIFI

  - by JavaIsMyIsland

  Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

  Read the article

• Exclamation 403 forbidden for cgi-bin/ and cannot protect site with password

  - by gasgdasdgasdg

  First problem i have is i am getting 403 forbidden error for cgi-bin/ I have created a new /var/www2/ i can access it fine. php runs fine. Second problem is I cannot password protect it. i first tried doing htpasswd, it asks for login but everytime i login it keeps asking for new one. its getting frustrating, i have tried all tricks. and doesn't seem to work. this is a virtual host config inside sites-available. httpd.conf is empty but i have apache2.conf Code: NameVirtualHost 12.12.12.12. <VirtualHost 12.12.12.12> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www2/cgi-bin/ <Directory "/var/www2/cgi-bin/"> AllowOverride Options Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

  Read the article

• Internet Radio Station for University

  - by ryan

  I am trying to help my University Student Radio station rethink the setup of the way they stream music, but I have some questions regarding the use of Ubuntu to stream music. Currently, the radio station uses two windows machines: one of which is used to stream the radio station and serve the website, and the other is used by rotating djs to select songs and create playlists. The computer used by djs feeds mono into the sound card of the server and the server streams the feed online. -Ideally I would like to maintain a two-computer setup: One computer as server, and another that is used to select and play music by rotating djs. -I would like to use Ubuntu for the server. -I would like to use Windows for the other machine. -The server should be able to stream song information. First, is there a way to somehow get the song information from an analog feed? Second, what is the best streaming server for radio? I have encountered shoutcast, icecast, and darwin, but I don't know where to begin in attempting to gauge them. Finally, if anyone has any tips or pointers about small internet radio station management/ setup they would be appreciated as this is my first radio station, and I am eager to hear of past experiences.

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Improve speed of "start menu" in Linux Mint 10 - Ubuntu 10.10 derivative

  - by Gabriel L. Oliveira

  I have a global menu (including application, administration and system tabs) that is taking too much time (for me) to load (about 2.5 seconds). Of course, this time is taken only during first start. After it have loaded, next times are better ( less than 0.2 miliseconds) The menu was taking more time before (about 5 seconds), and I found that was because of the 'Other' part of the menu, that included many applications installed with Wine, so I removed all of them (I didn't need them at all). I have a "normal" knowledge of programming, and I think that the process of starting the menu for the first time has some kind of "cache function", that tries to find which apps are present that need to be placed under menu to be shown to user. But didn't found this function so that I could analyze in details what he is doing (if searching for files under "~/.local/share/applications" or anything else). Also, I found that hitting "Alt-F2" also fires this "cache function", because after waiting it to load, the process of opening the menu took less than 0.2 miliseconds. So, could anyone help me in order to reduce this time? I found on internet that some user could reduce the time by resizing the icons of applications. But found here that most of my icons are already at 25x25 size. Any other idead? Maybe a multiprocess to load it, or include it under startup... don't know. Ps: Sorry if this is an awkward question, but I just do not like waiting for things to happen, and think that this process should be smoother than it's now. Also, thanks in advance!

  Read the article

• What is the point of PPPoE?

  - by aaa90210

  I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

  Read the article

• Unable to understand why Alfresco doesn't start on Tomcat

  - by Infernalsirius

  Hi all, I have a problem that I've been inspecting for a while now, googling and everything but could not begin to understand. I'm really not used to java, even less tomcat. So there it is. First, the setup. Centos 5.3 on a virtualized server. Bitnami Native Alfresco stack (tomcat5.5, mysql5, java, javajdk, JDBC) Content of catalina.log. Since it's the shortest and where I found my first clue to what is going wrong: SEVERE: Error listenerStart Aug 27, 2009 5:32:58 PM org.apache.coyote.http11.Http11BaseProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:32:58 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 229 ms Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/5.5.25 Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardHost start INFO: XML validation disabled Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Context [/alfresco] startup failed due to previous errors Aug 27, 2009 5:34:48 PM org.apache.coyote.http11.Http11BaseProtocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:34:48 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Aug 27, 2009 5:34:48 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/11 config=null Aug 27, 2009 5:34:48 PM org.apache.catalina.storeconfig.StoreLoader load INFO: Find registry server-registry.xml at classpath resource Aug 27, 2009 5:34:48 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 110327 ms Aug 27, 2009 5:38:27 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:38:28 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Aug 27, 2009 5:38:29 PM org.apache.coyote.http11.Http11BaseProtocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8080 There's the content of catalina.out, it seems to be a stack trace or application trace of the error, is that right? Catalina.out gist on github There is a 404 error telling me this: The requested resource (/alfresco/) is not available. This is it. I think.

  Read the article

• httpd 2.2.15 + suPHP + suExec + php5 = permission and information ?

  - by Prix

  Hi, i am currently playing around with suexec, suphp, php5 on my apache on slackware 13.1. Everything is installed and working properly but now i did like to got further into the directory permissions and at suphp settings and options available. initially i was planning to leave suphp disabled unless a virtualhost has it specified to be enabled but it does not seem to work, see sample: mod_php.conf which is included in my httpd.conf # # mod_php & mod_suPHP - PHP Hypertext Preprocessor module # # Load the PHP module: LoadModule php5_module lib/httpd/modules/libphp5.so # Load the suPHP module: LoadModule suphp_module lib/httpd/modules/mod_suphp.so <IfModule mod_php5.c> # Tell Apache to feed all *.php files through PHP. If you'd like to # parse PHP embedded in files with different extensions, comment out # these lines and see the example below. <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> </IfModule> <IfModule mod_suphp.c> # This option tells mod_suphp if a PHP-script requested on this server (or # VirtualHost) should be run with the PHP-interpreter or returned to the # browser "as it is". suPHP_Engine off </IfModule> With the above first sample it makes suPHP and PHP not work if i comment out the php5 stuff but the module it will run just fine ... So my first question is, how could i possible make this setup work ? Leave suPHP disabled using php5 by default and if a virtualhost has suPHP enabled it will disable php5 and use suPHP. if any information is lacked here please let me know and i will update with any additional information you may need. Thanks in advance.

  Read the article

• Error - "IR Hardware not detected" - but it's installed/working

  - by Robert

  I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

  Read the article

• Unable to understand why Alfresco doesn't start on Tomcat

  - by Infernalsirius

  I have a problem that I've been inspecting for a while now, googling and everything but could not begin to understand. I'm really not used to java, even less tomcat. So there it is. First, the setup. Centos 5.3 on a virtualized server. Bitnami Native Alfresco stack (tomcat5.5, mysql5, java, javajdk, JDBC) Content of catalina.log. Since it's the shortest and where I found my first clue to what is going wrong: SEVERE: Error listenerStart Aug 27, 2009 5:32:58 PM org.apache.coyote.http11.Http11BaseProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:32:58 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 229 ms Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/5.5.25 Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardHost start INFO: XML validation disabled Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Context [/alfresco] startup failed due to previous errors Aug 27, 2009 5:34:48 PM org.apache.coyote.http11.Http11BaseProtocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:34:48 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Aug 27, 2009 5:34:48 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/11 config=null Aug 27, 2009 5:34:48 PM org.apache.catalina.storeconfig.StoreLoader load INFO: Find registry server-registry.xml at classpath resource Aug 27, 2009 5:34:48 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 110327 ms Aug 27, 2009 5:38:27 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:38:28 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Aug 27, 2009 5:38:29 PM org.apache.coyote.http11.Http11BaseProtocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8080 There's the content of catalina.out, it seems to be a stack trace or application trace of the error, is that right? Catalina.out gist on github There is a 404 error telling me this: The requested resource (/alfresco/) is not available. This is it. I think.

  Read the article

• How can Django/WSGI and PHP share / on Apache?

  - by Mark Snidovich

  I have a server running an established PHP site, as well as some Django apps. Currently, a VirtualHost set up for PHP listens on port 80, and requests to certain directories are proxied to a VirtualHost set up for Django with WSGI. I'd like to change it so Django handles anything not existing as a PHP script or static file. For example, / -parsed by PHP as index.php /page.php -parsed as PHP normally /images/border.jpg -served as a static file /johnfreep -handled by Django (interpreted by urls.py) /pages/john -handled by Django /(anything else) - handled by Django I have a few ideas. It seems the options are 'php first' or 'wsgi first'. set up Django on port 80, and set Apache to skip all the known PHP, CSS or image files. Maybe using SetHandler? Anything else goes to Django to be parsed by urls.py. Set up a script referring everything to Django as a 404 handler on PHP. So, if a file is not found for a name, it sends the request path to a VirtualHost running Django to be parsed.

  Read the article

• BIND9 server types

  - by aGr

  I was configuring DNS on my server using BIND9, everything seems to work, but I have a question regarding my config file. I've ended up with this configuration in /etc/bind/named.conf.local zone "example.com" { type master; file "/etc/bind/db.example.com"; allow-transfer { 192.168.1.1; }; }; zone "1.168.192.in-addr.arpa" { type master; notify no; file "/etc/bind/db.192"; allow-transfer { 192.168.1.1; }; }; forwarders { 10.253.22.140; 10.253.22.141; }; I've read about the different type of dns server, like primary master etc. The first two parts (zone and zone) corresponds to primary dns server configuration. First record for "classic" lookup, second one for reverse. The last part (forwarders) is configuration of cache-server and contains the ISP's IP of DNS server. So all names resolved thanks to this server will be cached. Simple question: am I right? Does my description make sense? Or one server can be only either master or either cached?

  Read the article

• Change OpenVZ route to pass through ip failover

  - by Kevin Campion

  I have one dedicaced server with its own IP and another IP (failover) who refer to the first. I will wish to change the gateway of a Proxmox virtual machine (openvz) who runs on this dedicaced server to go through the failover IP rather than the ip of host main server. Once connected to a virtual machine, when I do a traceroute VE# traceroute www.google.fr traceroute to www.google.fr (209.85.229.104), 30 hops max, 60 byte packets 1 MY_SERVER_NAME.ovh.net (xxx.xxx.xxx.xxx FIRST_IP_MAIN_SERVER) 0.021 ms 0.010 ms 0.009 ms The first line tells me the ip of host main server. I would like that the traceroute display the second IP failover. VE# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 * 255.255.255.255 UH 0 0 0 venet0 default 192.0.2.1 0.0.0.0 UG 0 0 0 venet0 With iptables HOST# iptables -t nat -L Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere MASQUERADE all -- anywhere anywhere SNAT tcp -- anywhere 10.10.101.2 tcp dpt:www state NEW,RELATED,ESTABLISHED,UNTRACKED to:SECOND_IP_FAILOVER SNAT all -- 10.10.101.2 anywhere to:SECOND_IP_FAILOVER 10.10.101.2 is the virtual machine IP (interface venet0) Any ideas ?

  Read the article

• Desktop bigger than screen

  - by alex

  I am using MSI U115 11" netbook (OS: Windows XP Home, graphics card: Intel Graphics Media Accelerator 500) and today after I switched it on, desktop was bigger than screen. To be exact: screen resolution was set to the lowest possible and I could move mouse outside of screen (but only below - left, right and up worked normally, mouse could not exceed screen boundaries). I changed resolution back to normal, but the problem with desktop being bigger than screen remained (as before, only lower part - cannot see task bar, etc. When I hit windows button on keyboard, only upper part of menu start is visible). What I already tried was changing all kind of graphics and screen settings - none of them helped. I also tried to restore the system to few days before, but it didn't help neither. What can I do to make the desktop look "normally"? EDIT: Some additional info regarding screen: Sorry it's in polish - but let me explain. There are two screens I can choose (Monitor domyslny means default screen), but the second one (the default one) is not available. After I choose it and click apply number 1. is used (and as you can see it has only two resolutions available. There are more in the second one - but without 1024x600 though). The two ticked and grayed out options here are Use this screen as the main one and Enlarge Windows desktop to match this monitor's size. Too bad I cannot change them. When I choose the second screen, the first box is unchecked and grayed out. The second box is available to be changed but it doesn't matter anyway as after applying changes it reverts to the first screen anyway. EDIT: Intel Graphics Media Control Panel screenshot.

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• What does a connection timeout indicate when performing an NFS mount?

  - by DeeDee

  We have a shiny new QNAP NAS (TS-879U-RP), and I'm trying to mount it to our big ol' RHEL server in the same manner as our other two QNAP NAS devices. The IT department won't give me the root privileges to the NAS, so I can't SSH in (I know, I know). The first thing I did was to, via the QNAP web admin interface, create a network share named "Runs." I then added the IP of the RHEL server to the permissions list: On the RHEL server, I then added the following line to /etc/fstab: [IP of NAS]:/Runs /mnt/gsrnas3 nfs defaults 0 0 Aside from the IP and the specific mount directory name, this is how I mounted the other two NAS devices. I then created the gsrnas3 directory under /mnt/, and then ran `mount /mnt/gsrnas3' I got the following error: mount.nfs: Connection timed out My first thought is that it's a ports issue, but I don't have enough specific experience with this issue to know for sure. I have two other NAS devices by the same manufacturer already mounted to this RHEL server, so that leads me to believe the configuration issue is on the NAS side of things. I can ping the NAS device successfully from the RHEL server. Not being able to SSH into said NAS is a huge hassle, though. Any ideas?

  Read the article

• Mail.app doesn't detect sender in Address Book

  - by CoreSandello

  I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• How to set up GRUB2 chainloader to other Grub (Fedora, Debian) on GPT

  - by basic6

  I'm trying to set up a dedicated GRUB2 which (chain-)loads another GRUB on a disk with GPT partition table. Relevant partitions: /dev/sda1 BIOS_BOOT /dev/sda2 BOOT (ext2) /dev/sda3 FEDORA (ext4) /dev/sda6 DEBIAN (ext4) I installed Fedora first, using /dev/sda2 as boot partition. Then I installed Debian. The Debian installer recognized the Fedora installation and added it as boot entry, then installed its GRUB into the MBR. While this works for the moment, it's pretty messy, because every Debian update may change the boot config, removing the Fedora entry (tried it) and the other way around. That's why I want both systems to have their own boot loader and one main boot loader (that could reside on /dev/sda2), which loads one of them. This is what I've tried: Moved everything from /dev/sda2 to /dev/sda3/boot Removed /boot mount point in Fedora (so /dev/sda2 isn't used anymore) From a live Linux, installed GRUB2 to the MBR (grub-install --boot-directory=sda2 /dev/sda) Wrote a menu.lst: title Fedora root (hd0,2) chainloader +1 (Again, for Debian) Converted that to a grub.cfg script (grub-menu2cfg or something like that) When booting, actually got a GRUB2 menu with "Fedora" (and "Debian") When selecting any one of those: error: invalid signature Issued "grub-install /dev/sda6" (and ...sda3) from all kinds of live Linux systems, all of which failed with another error message (in the case of the Debian installer, without explanation at all) Added --force to the chainloader line, now it says "loading", then reboots Found douzens of howtos, none of which seem to work for me Since I get the self-made GRUB2 menu on bootup, I've at least successfully installed the first stage of GRUB, right? When trying to chainload, some signature is checked and seems to be wrong - how do I fix it? The boot menus (Fedora with its different Kernel versions and Debian with Debian and Fedora as well) are now on the system partitions (/dev/sda3, /dev/sda6), is there anything else to do on these partitions, so they can be chainloaded? Any help is greatly appreciated.

  Read the article

• Apache ScriptAlias and access error?

  - by Parhs

  First of all after much pain i figured out how to make it work in Apache 2.4 windowz. Here is my configuration that seems to work successfully for git clone and push and everything. Problem First of all my configuration works. There is a "Require all denied" at / directory. I want only git functionality and nothing else. Example Request from a git client 192.168.100.252 - - [07/Oct/2012:04:44:51 +0300] "GET /git/simple/info/refs?service=git-upload-pack HTTP/1.1" 200 264` Error caused by that Request [Sun Oct 07 04:44:51.903334 2012] [authz_core:error] [pid 6988:tid 956] [client 192.168.100.252:13493] AH01630: client denied by server configuration: C:/git-server/web/simple There isnt any error at gitclient everything works fine but i get this at error log. Is there any solution for this error to not appear?I worry about log size. <VirtualHost *:80> DocumentRoot "C:\git-server\web" ServerName git.****censored**** DirectoryIndex index.php SetEnv GIT_PROJECT_ROOT c:/git-server/repositories SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER ScriptAlias /git/ "C:/Program Files (x86)/Git/libexec/git-core/git-http-backend.exe/" <LocationMatch "^/.*/git-receive-pack$"> Options +ExecCGI AuthType Basic AuthName intranet AuthUserFile "C:/git-server/config/users" Require valid-user </LocationMatch> <Directory /> Options All Require all denied </Directory> <Directory "C:\Program Files (x86)\Git\libexec\git-core"> Options +ExecCGI Options All Require all granted </Directory> </VirtualHost>

  Read the article

• What is /etc/apache2/sites-available used for and is it necessary?

  - by Mariane

  I have 3 sites, each with a specific IP, running on apache2 (up-to-date Ubuntu). To put a site online, I just created a file in: /etc/apache2/sites-enabled and in this file I told apache which directory was the root directory for this site, and to which IP it should correspond. So I have 000-default 001-www.lapf.eu 002-www.felkin.info 003-www.seidhr.fr in this directory. My first site, lapf suddenly lost contact with its database after the domain name was transferred from another registrar unto the registrar who is also hosting the site's data. Then I did an update, and I reinstalled mysql-server and mysql-common, and I did I-have-forgotten-what to reinstall the locales (uft8 and such) which had vanished for some reason. This fixed my first site. Now I noticed that the other 2 sites are offline. Pointing a browser to them just hangs until timeout. They used to function, and their domain names did not move, they are still registered at the same place. The files are still in /etc/apache2/sites-enabled I noticed another directory: /etc/apache2/sites-available with just defaut and default.ssl in it. Why are there 2 directories, sites-enabled and sites-available? Should I copy the files from "sites-enabled" into "sites-available"? Or should I put a modified version of each in "sites-available"? command: "apache2ctl -S" VirtualHost configuration: 92.243.20.169:80 Charlotte (/etc/apache2/sites-enabled/001-www.lapf.eu:1) 92.243.21.141:80 xvm-21-141.ghst.net (/etc/apache2/sites-enabled/002-www.felkin.info:1) 92.243.4.114:80 xvm-4-114.ghst.net (/etc/apache2/sites-enabled/003-www.seidhr.fr:1) wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server Charlotte (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost Charlotte (/etc/apache2/sites-enabled/000-default:1) Syntax OK

  Read the article

• How can I copy a VMware Fusion virtual machine to a FAT32 partition?

  - by Michael Prescott

  I created the virtual machine on a host running OS X. I then moved the machine to a FAT32 partition on an external drive. It moved the first time without error. Then I moved it from the external drive to a host running Ubuntu 9.10. I had to move to a FAT32 partition first because Ubuntu doesn't recognize Mac OS Extended partitions on the drive. So, the virtual machine (vm) ran on the ubuntu host for a while and then I moved it back to the FAT32 partition and from there back to the OS X host. I worked on the vm for a while on the OS X host and then attempted to move it back to the FAT32 partition. I get the following system error: The Finder can’t complete the operation because some data in “my-virtual-machine” can’t be read or written. (Error code -36) Interestingly, I can move the file to another OS X partition, just not FAT32. I also perused VMware's forums and found advice to set permissions on all files and folders to 777. I did this, but have had no success. I notice the the files within the vm package are 777 now, but there is an extended attributes symbol on their permission details "rwxrwxrwx@" Since I can copy the vm between OS X partitions, but not to non OS X partitions, and all files and folders withing the vm package and the package itself have permissions of 777, I speculate that the "@" is the problem. How can I remove the "@" or is there something else I need to modify to allow me to copy/move the vm to other hosts?

  Read the article

• Nmap XML parsing with Powershell

  - by Craig620

  I am trying to parse the XML output from NMAP and isolate just the hostadddress and the vendor from the osmatch. I've actually done that with the following: select-xml -path nmap.xml -xpath "nmaprun/host/address/@addr|nmaprun/host/os/osmatch/osclass/@vendor" | select -expandproperty node Which produces: #text ----- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP What I was not expecting is that it would jam it all into a single column.Silly me would like the address in one column, and the vendor in another column. I Would like: #addr #vendor ----- ------- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP In the several hours I spent learning xpath today, I also realized that this file has a single address for each host, but multiple OS guesses for each host. I would also like to use only the first osGuess in the output. Tired using: -xpath "(nmaprun/host/os/osmatch/osclass/@vendor)[1]" But that truncates the whole data set to a single line of output, instead of only limiting the only the first osclass element of each host. Changing the parens to surround only the @vendor element like .../(@vendor)[1] and .../(@vendor[1]) but both fail with "Expression must evaluate to a node-set." Thanks in advance

  Read the article

• Certain Japanese characters aren't displayed properly

  - by Nisto

  On the following site: http://www.nciku.com/search/radical the first 2 characters on the second row of the "Step 2" table aren't displayed properly. All other characters look fine. I tried re-installing the Asian fonts via the checkboxes regarding Asian fonts in the "Regional and Language Options" control panel applet. I have tried removing every single Font from the Fonts folder (some were ofcourse not possible to remove), and re-installing them all again. I did this by... Running cmd Closing down the explorer process In cmd; using the command DEL /F /S /Q * in the Fonts folder Putting in my XP SP3 Retail disc In cmd; using expand -r *.tt_ in the I386 folder on the XP disc (and any other font file, in the I386\LANG folder) I also tried installing this pack from Microsoft, but this solved nothing either. I even tried running my browser (Firefox) through AppLocale. And changing character encoding -- again, does not help. I've also tried viewing the page in Internet Explorer. What could be wrong? I have checked my Fonts folder, to make sure that every single font available on the XP disc is available in WINDOWS\Fonts. What shows in the first square on the second row - I can't really tell what it's supposed to look like (but it's not the proper character)... but the second square shows a rectangular symbol containing HEX code. I've been in this situation before -- and it has been when I've been missing fonts. But how could I possibly be missing a necessary font? Shouldn't it be provided in the Asian "font packages"? I've talked to some other users that has viewed the page, and they had no problems displaying those characters on second row - even though they're only using the fonts provided on the Windows installation disc. Windows XP Professional Service Pack 3 (x86 - with latest updates) Firefox 3.6.15

  Read the article

• Setting up WHM nameservers

  - by Miskone

  I am new to server administration and I've just got a dedicated root server from Hetzner. First I set up in Hetzner's robot DNS entries Registered nameservers: ns1.raybear.com 88.198.32.57 ns2.raybear.com 88.198.32.57 Under DNS entires I have buzz-buzz.me pointing to 88.198.32.57 // My server IP address and on my WHM I have DNS zone for buzz-buzz.me ; cPanel first:11.42.1.17 (update_time):1402062640 Cpanel::ZoneFile::VERSION:1.3 hostname:hosting.raybear.com latest:11.42.1.17 ; Zone file for buzz-buzz.me $TTL 14400 buzz-buzz.me. 86400 IN SOA ns1.raybear.com. miskone.gmail.com. ( 2014060605 ;Serial Number 86400 ;refresh 7200 ;retry 3600000 ;expire 86400 ) buzz-buzz.me. 86400 IN NS ns1.raybear.com. buzz-buzz.me. 86400 IN NS ns2.raybear.com. buzz-buzz.me. 14400 IN A 88.198.32.57 localhost 14400 IN A 127.0.0.1 buzz-buzz.me. 14400 IN MX 0 buzz-buzz.me. mail 14400 IN CNAME buzz-buzz.me. www 14400 IN CNAME buzz-buzz.me. ftp 14400 IN CNAME buzz-buzz.me. agent 14400 IN A 88.198.32.57 src 14400 IN A 88.198.32.57 platform 14400 IN A 88.198.32.57 But still I have some problems accesing buzz-buzz.me, agent.buzz-buzz.me and platform.buzz-buzz.me Also I have problem getting mails on Google account, I can send but not receive emails. How to solve this. As I said I am completly new here and I need urgent help.:(

  Read the article

< Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >