Search Results

Search found 21327 results on 854 pages for 'display resolution'.

Page 357/854 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

  • Collision 2D Quads

    - by Vico Pelaez
    I want to detect collision between two 2D squares, one square is static and the other one moves according to keyboard arrows. I have implemented some code, however nothing happens when they overlap each other and what I tried to achieve in the code was to detect an overlapping between them. I think I am either not understanding the concept really well or that because one of the squares is moving this is not working. Please I would really appreciate your help. Thank you! float x1=0.05 ,Y1=0.05; float x2=0.05 ,Y2=0.05; float posX1 =0.5, posY1 = 0.5; float movX2 = 0.0 , movY2 = 0.0; struct box{ int width=0.1; int heigth=0.1; }; void init(){ glClearColor(0.0, 0.0, 0.0, 0.0); glColor3f(1.0, 1.0, 1.0); } void quad1(){ glTranslatef(posX1, posY1, 0.0); glBegin(GL_POLYGON); glColor3f(0.5, 1.0, 0.5); glVertex2f(-x1, -Y1); glVertex2f(-x1, Y1); glVertex2f(x1,Y1); glVertex2f(x1,-Y1); glEnd(); } void quad2(){ glMatrixMode(GL_PROJECTION); glLoadIdentity(); glPushMatrix(); glTranslatef(movX2, movY2, 0.0); glBegin(GL_POLYGON); glColor3f(1.5, 1.0, 0.5); glVertex2f(-x2, -Y2); glVertex2f(-x2, Y2); glVertex2f(x2,Y2); glVertex2f(x2,-Y2); glEnd(); glPopMatrix(); } void reset(){ //Reset position of square??? movX2 = 0.0; movY2 = 0.0; collisionB = false; } bool collision(box A, box B){ int leftA, leftB; int rightA, rightB; int topA, topB; int bottomA, bottomB; //Calculate the sides of box A leftA = x1; rightA = x1 + A.width; topA = Y1; bottomA = Y1 + A.heigth; //Calculate the sides of box B leftB = x2; rightB = x2 + B.width; topB = Y1; bottomB = Y1+ B.heigth ; if( bottomA <= topB ) return false; if( topA >= bottomB ) return false; if( rightA <= leftB ) return false; if( leftA >= rightB ) return false; return true; } float move_unit = 0.1; void keyboardown(int key, int x, int y) { switch (key){ case GLUT_KEY_UP: movY2 += move_unit; break; case GLUT_KEY_RIGHT: movX2 += move_unit; break; case GLUT_KEY_LEFT: movX2 -= move_unit; break; case GLUT_KEY_DOWN: movY2 -= move_unit; break; default: break; } glutPostRedisplay(); } void display(){ glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_PROJECTION); glLoadIdentity(); cuad1(); if (!collision) { cuad2(); } else{ reset(); } glFlush(); } int main(int argc, char** argv){ glutInit(&argc, argv); glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); glutInitWindowSize(500,500); glutInitWindowPosition(0, 0); glutCreateWindow("Collision Practice"); glutSpecialFunc(keyboardown); glutDisplayFunc(display); init(); glutMainLoop(); }

    Read the article

  • Rotating 2D Object

    - by Vico Pelaez
    Well I am trying to learn openGL and want to make a triangle move one unit (0.1) everytime I press one of the keyboard arrows. However i want the triangle to turn first pointing the direction where i will move one unit. So if my triangle is pointing up and I press right the it should point right first and then move one unit in the x axis. I have implemented the code to move the object one unit in any direction, however I can not get it to turn pointing to the direction it is going. The initial position of the Triangle is pointing up. #define LENGTH 0.05 float posX = -0.5, posY = -0.5, posZ = 0; float inX = 0.0 ,inY = 0.0 ,inZ = 0.0; // what values???? void rect(){ glMatrixMode(GL_PROJECTION); glLoadIdentity(); glPushMatrix(); glTranslatef(posX,posY,posZ); glRotatef(rotate, inX, inY, inZ); glBegin(GL_TRIANGLES); glColor3f(0.0, 0.0, 1.0); glVertex2f(-LENGTH,-LENGTH); glVertex2f(LENGTH-LENGTH, LENGTH); glVertex2f(LENGTH, -LENGTH); glEnd(); glPopMatrix(); } void display(){ //Clear Window glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); rect(); glFlush(); } void init(){ glClearColor(0.0, 0.0, 0.0, 0.0); glColor3f(1.0, 1.0, 1.0); } float move_unit = 0.01; bool change = false; void keyboardown(int key, int x, int y) { switch (key){ case GLUT_KEY_UP: if(rotate = 0) posY += move_unit; else{ inX = 1.0; rotate = 0; } break; case GLUT_KEY_RIGHT: if(rotate = -90) posX += move_unit; else{ inX = 1.0; // is this value ok?? rotate -= 90; } break; case GLUT_KEY_LEFT: if(rotate = 90) posX -= move_unit; else{ inX = 1.0; // is this value ok??? rotate += 90; } break; case GLUT_KEY_DOWN: if(rotate = 180) posY -= move_unit; else{ inX = 1.0; rotate += 180; } break; case 27: // Escape button exit(0); break; default: break; } glutPostRedisplay(); } int main(int argc, char** argv){ glutInit(&argc, argv); glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); glutInitWindowSize(500,500); glutInitWindowPosition(0, 0); glutCreateWindow("Triangle turn"); glutSpecialFunc(keyboardown); glutDisplayFunc(display); init(); glutMainLoop()

    Read the article

  • installer can't find partition, but fdisk can find them

    - by pxd
    I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

    Read the article

  • Appropriate design / technologies to handle dynamic string formatting?

    - by Mark W
    recently I was tasked with implementing a way of adding support for versioning of hardware packet specifications to one of our libraries. First a bit of information about the project. We have a hardware library which has classes for each of the various commands we support sending to our hardware. These hardware modules are essentially just lights with a few buttons, and a 2 or 4 digit display. The packets typically follow the format {SOH}AADD{ETX}, where AA is our sentinel action code, and DD is the device ID. These packet specs are different from one command to the next obviously, and the different firmware versions we have support different specifications. For example, on version 1 an action code of 14 may have a spec of {SOH}AADDTEXT{ETX} which would be AA = 14 literal, DD = device ID, TEXT = literal text to display on the device. Then we come out with a revision with adds an extended byte(s) onto the end of the packet like this {SOH}AADDTEXTE{ETX}. Assume the TEXT field is fixed width for this example. We have now added a new field onto the end which could be used to say specify the color or flash rate of the text/buttons. Currently this java library only supports one version of the commands, the latest. In our hardware library we would have a class for this command, say a DisplayTextArgs.java. That class would have fields for the device ID, the text, and the extended byte. The command class would expose a method which generates the string ("{SOH}AADDTEXTE{ETX}") using the value from the class. In practice we would create the Args class as needed, populate the fields, call the method to get our packet string, then ship that down across the CAN. Some of our other commands specification can vary for the same command, on the same version, depending on some runtime state. For example, another command for version 1 may be {SOH}AA{ETX}, where this action code clears all of the modules behind a specific controller device of their text. We may overload this packet to have option fields with multiple meanings like {SOH}AAOC{ETX} where OC is literal text, which tells the controller to only clear text on a specific module type, and to leave the others alone, or the spec could also have an option format of {SOH}AADD{ETX} to clear the text off a a specific device. Currently, in the method which generates the packet string, we would evaluate fields on the args class to determine which spec we will be using when formatting the packet. For this example, it would be along the lines of: if m_DeviceID != null then use {SOH}AADD{ETX} else if m_ClearOCs == true then use {SOH}AAOC{EXT} else use {SOH}AA{ETX} I had considered using XML, or a database to store String.format format strings, which were linked to firmware version numbers in some table. We would load them up at startup, and pass in the version number of the hardwares firmware we are currently using (I can query the devices for their firmware version, but the version is not included in all packets as part of the spec). This breaks down pretty quickly because of the dynamic nature of how we select which version of the command to use. I then considered using a rule engine to possibly build out expressions which could be interpreted at runtume, to evaluate the args class's state, and from that select the appropriate format string to use, but my brief look at rule engines for java scared me away with its complexity. While it seems like it might be a viable solution, it seems overly complex. So this is why I am here. I wouldn't say design is my strongest skill, and im having trouble figuring out the best way to approach this problem. I probably wont be able to radically change the args classes, but if the trade off was good enough, I may be able to convince my boss that the change is appropriate. What I would like from the community is some feedback on some best practices / design methodologies / API or other resources which I could use to accomplish: Logic to determine which set of commands to use for a given firmware version Of those command, which version of each command to use (based on the args classes state) Keep the rules logic decoupled from the application so as to avoid needing releases for every firmware version Be simple enough so I don't need weeks of study and trial and error to implement effectively.

    Read the article

  • Jquery mobile and Google maps [on hold]

    - by Jack
    I have been trying to get my google maps to display within a page of a mobile app. The map will display for a second, and then disappear. I have read about a jquery bug, but i can't seem to find a way to get this code to work. any help would be greatly appreciated. <script> var geocoder; var currentLocation; var searchResults; var map; var directionsDisplay; var directionsService; function init(){ geocoder = new google.maps.Geocoder(); if (navigator.geolocation){ navigator.geolocation.watchPosition(showLocation, locationError); } else { alert("Geolocation not supported on this device"); return; } }//init function function showLocation(location){//start showlocation currentLocation = new google.maps.LatLng(location.coords.latitude, location.coords.longitude); $('#lat').attr("value", currentLocation.lat()); $('#lng').attr("value", currentLocation.lng()); geocoder = new google.maps.Geocoder(); geocoder.geocode({'latLng': currentLocation}, function(results, status){ if (status == google.maps.GeocoderStatus.OK){ if (results[0]){ var address = results[0].formatted_address; $('#loc').html(results[0].formatted_address); var info = "Latitude: " + location.coords.latitude + " Longitude: " + location.coords.longitude + "<br />"; info += "Location accurate within " + location.coords.accuracy + " meters <br /> Last Update: " + new Date(location.timestamp).toLocaleString(); $('#acc').html(info); $('#address').attr("value", results[0].formatted_address); }else{ alert('No results found'); }//end else //if(!map) initMap(); }else { $('#loc').html('Geocoder failed due to: ' + status); }//end else });//end of function if (!map) initMap(); }//end showlocation function function locationError(error){ switch(error.code) { case error.PERMISSION_DENIED: alert("Geolocation access denied or disabled. To enable geolocation on your iPhone, go to Settings > General> Location Services"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unkown error"); break; }//endswitch }//endlocationerror function initMap(){ var mapOptions = { zoom: 14, mapTypeId: google.maps.MapTypeId.ROADMAP, center: currentLocation };//var mapOptions map = new google.maps.Map(document.getElementById('mapDiv'), mapOptions); google.maps.event.trigger(map, 'resize'); var bounds = new google.maps.LatLngBounds(); bounds.extend(currentLocation); map.fitBounds(bounds); //new code //var center; //function calculateCenter(){ //center = map.getCenter(); //} //google.maps.even.addDomListener(map, 'idle', function(){ //calculateCenter(); //}); //google.maps.even.addListenerOnce(map, 'idle', function(){ //google.maps.even.trigger(map,'resize'); //}); //google.maps.event.addDomListener(window, 'resize', function() { //map.setCenter(center); //});//end new code }//end initMap() //------------------------------------------------------------------------------- $(document).on("pageinit", init);

    Read the article

  • Is this spaghetti code already? [migrated]

    - by hephestos
    I post the following code writen all by hand. Why I have the feeling that it is a western spaghetti on its own. Second, could that be written better? <div id="form-board" class="notice" style="height: 200px; min-height: 109px; width: auto;display: none;"> <script type="text/javascript"> jQuery(document).ready(function(){ $(".form-button-slide").click(function(){ $( "#form-board" ).dialog(); return false; }); }); </script> <?php echo $this->Form->create('mysubmit'); echo $this->Form->input('inputs', array('type' => 'select', 'id' => 'inputs', 'options' => $inputs)); echo $this->Form->input('Fields', array('type' => 'select', 'id' => 'fields', 'empty' => '-- Pick a state first --')); echo $this->Form->input('inputs2', array('type' => 'select', 'id' => 'inputs2', 'options' => $inputs2)); echo $this->Form->input('Fields2', array('type' => 'select', 'id' => 'fields2', 'empty' => '-- Pick a state first --')); echo $this->Form->end("Submit"); ?> </div> <div style="width:100%"></div> <div class="form-button-slide" style="float:left;display:block;"> <?php echo $this->Html->link("Error Results", "#"); ?> </div> <script type="text/javascript"> jQuery(document).ready(function(){ $("#mysubmitIndexForm").submit(function() { // we want to store the values from the form input box, then send via ajax below jQuery.post("Staffs/view", { data1: $("#inputs").attr('value'), data2:$("#inputs2").attr('value'),data3:$("#fields").attr('value'), data4:$("#fields2").attr('value') } ); //Close the dialog $( "#form-board" ).dialog('close') return false; }); $("#inputs").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); $("#inputs2").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs2').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields2"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); }); </script>

    Read the article

  • i want to access mysql database table on given conditions in drop down menu [on hold]

    - by user3909877
    as the code below is accesing the database table directly but i want it to display the table content on giving conditions in drop down menu like when i select islamabad in one drop down menu and lahore in other as given in code and press search buttonn then it display the table flights.but it is displaying it directly <p class="h2">Quick Search</p> <div class="sb2_opts"> <p> </p> <form method="post" action=""> <p>Enter your source and destination.</p> <p> From:</p> <select name="from"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <p> To:</p> <select name="To"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <input type="submit" value="search" /> </form> </form> </table> <?php $from = isset($_POST['from'])?$_POST['from']:''; $to = isset($_POST['to'])?$_POST['to']:''; if( $from =='Islamabad'){ if($to == 'Lahore'){ $db_host = 'localhost'; $db_user = 'root'; $database = 'homedb'; $table = 'flights'; if (!mysql_connect($db_host, $db_user)) die("Can't connect to database"); if (!mysql_select_db($database)) die("Can't select database"); $result = mysql_query("SELECT * FROM {$table}"); if (!$result) { die("Query to show fields from table failed"); } $result = mysql_query("SELECT * FROM {$table}"); if (!$result) { die("Query to show fields from table failed"); } $fields_num = mysql_num_fields($result); echo "<h1>Table: {$table}</h1>"; echo "<table border='1'><tr>"; while($row = mysql_fetch_row($result)) { echo "<tr>"; // $row is array... foreach( .. ) puts every element // of $row to $cell variable foreach($row as $cell) echo "<td>$cell</td>"; echo "</tr>\n"; } } } mysqli_close($con); ?>

    Read the article

  • jQuery Globalization Plugin from Microsoft

    - by ScottGu
    Last month I blogged about how Microsoft is starting to make code contributions to jQuery, and about some of the first code contributions we were working on: jQuery Templates and Data Linking support. Today, we released a prototype of a new jQuery Globalization Plugin that enables you to add globalization support to your JavaScript applications. This plugin includes globalization information for over 350 cultures ranging from Scottish Gaelic, Frisian, Hungarian, Japanese, to Canadian English.  We will be releasing this plugin to the community as open-source. You can download our prototype for the jQuery Globalization plugin from our Github repository: http://github.com/nje/jquery-glob You can also download a set of samples that demonstrate some simple use-cases with it here. Understanding Globalization The jQuery Globalization plugin enables you to easily parse and format numbers, currencies, and dates for different cultures in JavaScript. For example, you can use the Globalization plugin to display the proper currency symbol for a culture: You also can use the Globalization plugin to format dates so that the day and month appear in the right order and the day and month names are correctly translated: Notice above how the Arabic year is displayed as 1431. This is because the year has been converted to use the Arabic calendar. Some cultural differences, such as different currency or different month names, are obvious. Other cultural differences are surprising and subtle. For example, in some cultures, the grouping of numbers is done unevenly. In the "te-IN" culture (Telugu in India), groups have 3 digits and then 2 digits. The number 1000000 (one million) is written as "10,00,000". Some cultures do not group numbers at all. All of these subtle cultural differences are handled by the jQuery Globalization plugin automatically. Getting dates right can be especially tricky. Different cultures have different calendars such as the Gregorian and UmAlQura calendars. A single culture can even have multiple calendars. For example, the Japanese culture uses both the Gregorian calendar and a Japanese calendar that has eras named after Japanese emperors. The Globalization Plugin includes methods for converting dates between all of these different calendars. Using Language Tags The jQuery Globalization plugin uses the language tags defined in the RFC 4646 and RFC 5646 standards to identity cultures (see http://tools.ietf.org/html/rfc5646). A language tag is composed out of one or more subtags separated by hyphens. For example: Language Tag Language Name (in English) en-AU English (Australia) en-BZ English (Belize) en-CA English (Canada) Id Indonesian zh-CHS Chinese (Simplified) Legacy Zu isiZulu Notice that a single language, such as English, can have several language tags. Speakers of English in Canada format numbers, currencies, and dates using different conventions than speakers of English in Australia or the United States. You can find the language tag for a particular culture by using the Language Subtag Lookup tool located here:  http://rishida.net/utils/subtags/ The jQuery Globalization plugin download includes a folder named globinfo that contains the information for each of the 350 cultures. Actually, this folder contains more than 700 files because the folder includes both minified and un-minified versions of each file. For example, the globinfo folder includes JavaScript files named jQuery.glob.en-AU.js for English Australia, jQuery.glob.id.js for Indonesia, and jQuery.glob.zh-CHS for Chinese (Simplified) Legacy. Example: Setting a Particular Culture Imagine that you have been asked to create a German website and want to format all of the dates, currencies, and numbers using German formatting conventions correctly in JavaScript on the client. The HTML for the page might look like this: Notice the span tags above. They mark the areas of the page that we want to format with the Globalization plugin. We want to format the product price, the date the product is available, and the units of the product in stock. To use the jQuery Globalization plugin, we’ll add three JavaScript files to the page: the jQuery library, the jQuery Globalization plugin, and the culture information for a particular language: In this case, I’ve statically added the jQuery.glob.de-DE.js JavaScript file that contains the culture information for German. The language tag “de-DE” is used for German as spoken in Germany. Now that I have all of the necessary scripts, I can use the Globalization plugin to format the product price, date available, and units in stock values using the following client-side JavaScript: The jQuery Globalization plugin extends the jQuery library with new methods - including new methods named preferCulture() and format(). The preferCulture() method enables you to set the default culture used by the jQuery Globalization plugin methods. Notice that the preferCulture() method accepts a language tag. The method will find the closest culture that matches the language tag. The $.format() method is used to actually format the currencies, dates, and numbers. The second parameter passed to the $.format() method is a format specifier. For example, passing “c” causes the value to be formatted as a currency. The ReadMe file at github details the meaning of all of the various format specifiers: http://github.com/nje/jquery-glob When we open the page in a browser, everything is formatted correctly according to German language conventions. A euro symbol is used for the currency symbol. The date is formatted using German day and month names. Finally, a period instead of a comma is used a number separator: You can see a running example of the above approach with the 3_GermanSite.htm file in this samples download. Example: Enabling a User to Dynamically Select a Culture In the previous example we explicitly said that we wanted to globalize in German (by referencing the jQuery.glob.de-DE.js file). Let’s now look at the first of a few examples that demonstrate how to dynamically set the globalization culture to use. Imagine that you want to display a dropdown list of all of the 350 cultures in a page. When someone selects a culture from the dropdown list, you want all of the dates in the page to be formatted using the selected culture. Here’s the HTML for the page: Notice that all of the dates are contained in a <span> tag with a data-date attribute (data-* attributes are a new feature of HTML 5 that conveniently also still work with older browsers). We’ll format the date represented by the data-date attribute when a user selects a culture from the dropdown list. In order to display dates for any possible culture, we’ll include the jQuery.glob.all.js file like this: The jQuery Globalization plugin includes a JavaScript file named jQuery.glob.all.js. This file contains globalization information for all of the more than 350 cultures supported by the Globalization plugin.  At 367KB minified, this file is not small. Because of the size of this file, unless you really need to use all of these cultures at the same time, we recommend that you add the individual JavaScript files for particular cultures that you intend to support instead of the combined jQuery.glob.all.js to a page. In the next sample I’ll show how to dynamically load just the language files you need. Next, we’ll populate the dropdown list with all of the available cultures. We can use the $.cultures property to get all of the loaded cultures: Finally, we’ll write jQuery code that grabs every span element with a data-date attribute and format the date: The jQuery Globalization plugin’s parseDate() method is used to convert a string representation of a date into a JavaScript date. The plugin’s format() method is used to format the date. The “D” format specifier causes the date to be formatted using the long date format. And now the content will be globalized correctly regardless of which of the 350 languages a user visiting the page selects.  You can see a running example of the above approach with the 4_SelectCulture.htm file in this samples download. Example: Loading Globalization Files Dynamically As mentioned in the previous section, you should avoid adding the jQuery.glob.all.js file to a page whenever possible because the file is so large. A better alternative is to load the globalization information that you need dynamically. For example, imagine that you have created a dropdown list that displays a list of languages: The following jQuery code executes whenever a user selects a new language from the dropdown list. The code checks whether the globalization file associated with the selected language has already been loaded. If the globalization file has not been loaded then the globalization file is loaded dynamically by taking advantage of the jQuery $.getScript() method. The globalizePage() method is called after the requested globalization file has been loaded, and contains the client-side code to perform the globalization. The advantage of this approach is that it enables you to avoid loading the entire jQuery.glob.all.js file. Instead you only need to load the files that you need and you don’t need to load the files more than once. The 5_Dynamic.htm file in this samples download demonstrates how to implement this approach. Example: Setting the User Preferred Language Automatically Many websites detect a user’s preferred language from their browser settings and automatically use it when globalizing content. A user can set a preferred language for their browser. Then, whenever the user requests a page, this language preference is included in the request in the Accept-Language header. When using Microsoft Internet Explorer, you can set your preferred language by following these steps: Select the menu option Tools, Internet Options. Select the General tab. Click the Languages button in the Appearance section. Click the Add button to add a new language to the list of languages. Move your preferred language to the top of the list. Notice that you can list multiple languages in the Language Preference dialog. All of these languages are sent in the order that you listed them in the Accept-Language header: Accept-Language: fr-FR,id-ID;q=0.7,en-US;q=0.3 Strangely, you cannot retrieve the value of the Accept-Language header from client JavaScript. Microsoft Internet Explorer and Mozilla Firefox support a bevy of language related properties exposed by the window.navigator object, such as windows.navigator.browserLanguage and window.navigator.language, but these properties represent either the language set for the operating system or the language edition of the browser. These properties don’t enable you to retrieve the language that the user set as his or her preferred language. The only reliable way to get a user’s preferred language (the value of the Accept-Language header) is to write server code. For example, the following ASP.NET page takes advantage of the server Request.UserLanguages property to assign the user’s preferred language to a client JavaScript variable named acceptLanguage (which then allows you to access the value using client-side JavaScript): In order for this code to work, the culture information associated with the value of acceptLanguage must be included in the page. For example, if someone’s preferred culture is fr-FR (French in France) then you need to include either the jQuery.glob.fr-FR.js or the jQuery.glob.all.js JavaScript file in the page or the culture information won’t be available.  The “6_AcceptLanguages.aspx” sample in this samples download demonstrates how to implement this approach. If the culture information for the user’s preferred language is not included in the page then the $.preferCulture() method will fall back to using the neutral culture (for example, using jQuery.glob.fr.js instead of jQuery.glob.fr-FR.js). If the neutral culture information is not available then the $.preferCulture() method falls back to the default culture (English). Example: Using the Globalization Plugin with the jQuery UI DatePicker One of the goals of the Globalization plugin is to make it easier to build jQuery widgets that can be used with different cultures. We wanted to make sure that the jQuery Globalization plugin could work with existing jQuery UI plugins such as the DatePicker plugin. To that end, we created a patched version of the DatePicker plugin that can take advantage of the Globalization plugin when rendering a calendar. For example, the following figure illustrates what happens when you add the jQuery Globalization and the patched jQuery UI DatePicker plugin to a page and select Indonesian as the preferred culture: Notice that the headers for the days of the week are displayed using Indonesian day name abbreviations. Furthermore, the month names are displayed in Indonesian. You can download the patched version of the jQuery UI DatePicker from our github website. Or you can use the version included in this samples download and used by the 7_DatePicker.htm sample file. Summary I’m excited about our continuing participation in the jQuery community. This Globalization plugin is the third jQuery plugin that we’ve released. We’ve really appreciated all of the great feedback and design suggestions on the jQuery templating and data-linking prototypes that we released earlier this year.  We also want to thank the jQuery and jQuery UI teams for working with us to create these plugins. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. You can follow me at: twitter.com/scottgu

    Read the article

  • Android "java.lang.noclassdeffounderror" exception

    - by wpbnewbie
    Hello, I have a android webservice client application. I am trying to use the java standard WS library support. I have stripped the application down to the minimum, as shown below, to try and isolate the issue. Below is the applicaiton, package fau.edu.cse; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; public class ClassMap extends Activity { TextView displayObject; @Override public void onCreate(Bundle savedInstanceState) { // Build Screen Display String String screenString = "Program Started\n\n"; // Set up the display super.onCreate(savedInstanceState); setContentView(R.layout.main); displayObject = (TextView)findViewById(R.id.TextView01); screenString = screenString + "Inflate Disaplay\n\n"; try { // Set up Soap Service TempConvertSoap service = new TempConvert().getTempConvertSoap(); // Successful Soap Object Build screenString = screenString + "SOAP Object Correctly Build\n\n"; // Display Response displayObject.setText(screenString); } catch(Throwable e){ e.printStackTrace(); displayObject.setText(screenString +"Try Error...\n" + e.toString()); } } } The classes tempConvert and tempConvertSoap are in the package fau.edu.cse. I have included the java SE javax libraries in the java build pasth. When the android application tries to create the "service" object I get a "java.lang.noclassdeffounderror" exception. The two classes tempConvertSoap and TempConvet() are generated by wsimport. I am also using several libraries from javax.jws.. and javax.xml.ws.. Of course the application compiles without error and loads correctly. I know the application is running becouse my "try/catch" routine is successfully catching the error and printing it out. Here is what is in the logcat says (notice that it cannot find TempConvert), 06-12 22:58:39.340: WARN/dalvikvm(200): Unable to resolve superclass of Lfau/edu/cse/TempConvert; (53) 06-12 22:58:39.340: WARN/dalvikvm(200): Link of class 'Lfau/edu/cse/TempConvert;' failed 06-12 22:58:39.340: ERROR/dalvikvm(200): Could not find class 'fau.edu.cse.TempConvert', referenced from method fau.edu.cse.ClassMap.onCreate 06-12 22:58:39.340: WARN/dalvikvm(200): VFY: unable to resolve new-instance 21 (Lfau/edu/cse/TempConvert;) in Lfau/edu/cse/ClassMap; 06-12 22:58:39.340: DEBUG/dalvikvm(200): VFY: replacing opcode 0x22 at 0x0027 06-12 22:58:39.340: DEBUG/dalvikvm(200): Making a copy of Lfau/edu/cse/ClassMap;.onCreate code (252 bytes) 06-12 22:58:39.490: DEBUG/dalvikvm(30): GC freed 2 objects / 48 bytes in 273ms 06-12 22:58:39.530: DEBUG/ddm-heap(119): Got feature list request 06-12 22:58:39.620: WARN/Resources(200): Converting to string: TypedValue{t=0x12/d=0x0 a=2 r=0x7f050000} 06-12 22:58:39.620: WARN/System.err(200): java.lang.NoClassDefFoundError: fau.edu.cse.TempConvert 06-12 22:58:39.830: WARN/System.err(200): at fau.edu.cse.ClassMap.onCreate(ClassMap.java:26) 06-12 22:58:39.830: WARN/System.err(200): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 06-12 22:58:39.830: WARN/System.err(200): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2459) 06-12 22:58:39.830: WARN/System.err(200): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512) 06-12 22:58:39.830: WARN/System.err(200): at android.app.ActivityThread.access$2200(ActivityThread.java:119) 06-12 22:58:39.880: WARN/System.err(200): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863) 06-12 22:58:39.880: WARN/System.err(200): at android.os.Handler.dispatchMessage(Handler.java:99) 06-12 22:58:39.880: WARN/System.err(200): at android.os.Looper.loop(Looper.java:123) 06-12 22:58:39.880: WARN/System.err(200): at android.app.ActivityThread.main(ActivityThread.java:4363) 06-12 22:58:39.880: WARN/System.err(200): at java.lang.reflect.Method.invokeNative(Native Method) 06-12 22:58:39.880: WARN/System.err(200): at java.lang.reflect.Method.invoke(Method.java:521) 06-12 22:58:39.880: WARN/System.err(200): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 06-12 22:58:39.880: WARN/System.err(200): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 06-12 22:58:39.880: WARN/System.err(200): at dalvik.system.NativeStart.main(Native Method) ...bla...bla...bla It would be great if someone just had an answer, however I am looking at debug strategies. I have taken this same application and created a standard java client application and it works fine -- of course with all of the android stuff taken out. What would be a good debug strategy? What methods and techniques would you recommend I try and isolate the problem? I am thinking that there is some sort of Dalvik VM incompatibility that is causing the TempConvert class not to load. TempConvert is an interface class that references a lot of very tricky webservice attributes. Any help with debug strategies would be gladly appreciated. Thanks for the help, Steve

    Read the article

  • Getting Started Building Windows 8 Store Apps with XAML/C#

    - by dwahlin
    Technology is fun isn’t it? As soon as you think you’ve figured out where things are heading a new technology comes onto the scene, changes things up, and offers new opportunities. One of the new technologies I’ve been spending quite a bit of time with lately is Windows 8 store applications. I posted my thoughts about Windows 8 during the BUILD conference in 2011 and still feel excited about the opportunity there. Time will tell how well it ends up being accepted by consumers but I’m hopeful that it’ll take off. I currently have two Windows 8 store application concepts I’m working on with one being built in XAML/C# and another in HTML/JavaScript. I really like that Microsoft supports both options since it caters to a variety of developers and makes it easy to get started regardless if you’re a desktop developer or Web developer. Here’s a quick look at how the technologies are organized in Windows 8: In this post I’ll focus on the basics of Windows 8 store XAML/C# apps by looking at features, files, and code provided by Visual Studio projects. To get started building these types of apps you’ll definitely need to have some knowledge of XAML and C#. Let’s get started by looking at the Windows 8 store project types available in Visual Studio 2012.   Windows 8 Store XAML/C# Project Types When you open Visual Studio 2012 you’ll see a new entry under C# named Windows Store. It includes 6 different project types as shown next.   The Blank App project provides initial starter code and a single page whereas the Grid App and Split App templates provide quite a bit more code as well as multiple pages for your application. The other projects available can be be used to create a class library project that runs in Windows 8 store apps, a WinRT component such as a custom control, and a unit test library project respectively. If you’re building an application that displays data in groups using the “tile” concept then the Grid App or Split App project templates are a good place to start. An example of the initial screens generated by each project is shown next: Grid App Split View App   When a user clicks a tile in a Grid App they can view details about the tile data. With a Split View app groups/categories are shown and when the user clicks on a group they can see a list of all the different items and then drill-down into them:   For the remainder of this post I’ll focus on functionality provided by the Blank App project since it provides a simple way to get started learning the fundamentals of building Windows 8 store apps.   Blank App Project Walkthrough The Blank App project is a great place to start since it’s simple and lets you focus on the basics. In this post I’ll focus on what it provides you out of the box and cover additional details in future posts. Once you have the basics down you can move to the other project types if you need the functionality they provide. The Blank App project template does exactly what it says – you get an empty project with a few starter files added to help get you going. This is a good option if you’ll be building an app that doesn’t fit into the grid layout view that you see a lot of Windows 8 store apps following (such as on the Windows 8 start screen). I ended up starting with the Blank App project template for the app I’m currently working on since I’m not displaying data/image tiles (something the Grid App project does well) or drilling down into lists of data (functionality that the Split App project provides). The Blank App project provides images for the tiles and splash screen (you’ll definitely want to change these), a StandardStyles.xaml resource dictionary that includes a lot of helpful styles such as buttons for the AppBar (a special type of menu in Windows 8 store apps), an App.xaml file, and the app’s main page which is named MainPage.xaml. It also adds a Package.appxmanifest that is used to define functionality that your app requires, app information used in the store, plus more. The App.xaml, App.xaml.cs and StandardStyles.xaml Files The App.xaml file handles loading a resource dictionary named StandardStyles.xaml which has several key styles used throughout the application: <Application x:Class="BlankApp.App" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="using:BlankApp"> <Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <!-- Styles that define common aspects of the platform look and feel Required by Visual Studio project and item templates --> <ResourceDictionary Source="Common/StandardStyles.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Application.Resources> </Application>   StandardStyles.xaml has style definitions for different text styles and AppBar buttons. If you scroll down toward the middle of the file you’ll see that many AppBar button styles are included such as one for an edit icon. Button styles like this can be used to quickly and easily add icons/buttons into your application without having to be an expert in design. <Style x:Key="EditAppBarButtonStyle" TargetType="ButtonBase" BasedOn="{StaticResource AppBarButtonStyle}"> <Setter Property="AutomationProperties.AutomationId" Value="EditAppBarButton"/> <Setter Property="AutomationProperties.Name" Value="Edit"/> <Setter Property="Content" Value="&#xE104;"/> </Style> Switching over to App.xaml.cs, it includes some code to help get you started. An OnLaunched() method is added to handle creating a Frame that child pages such as MainPage.xaml can be loaded into. The Frame has the same overall purpose as the one found in WPF and Silverlight applications - it’s used to navigate between pages in an application. /// <summary> /// Invoked when the application is launched normally by the end user. Other entry points /// will be used when the application is launched to open a specific file, to display /// search results, and so forth. /// </summary> /// <param name="args">Details about the launch request and process.</param> protected override void OnLaunched(LaunchActivatedEventArgs args) { Frame rootFrame = Window.Current.Content as Frame; // Do not repeat app initialization when the Window already has content, // just ensure that the window is active if (rootFrame == null) { // Create a Frame to act as the navigation context and navigate to the first page rootFrame = new Frame(); if (args.PreviousExecutionState == ApplicationExecutionState.Terminated) { //TODO: Load state from previously suspended application } // Place the frame in the current Window Window.Current.Content = rootFrame; } if (rootFrame.Content == null) { // When the navigation stack isn't restored navigate to the first page, // configuring the new page by passing required information as a navigation // parameter if (!rootFrame.Navigate(typeof(MainPage), args.Arguments)) { throw new Exception("Failed to create initial page"); } } // Ensure the current window is active Window.Current.Activate(); }   Notice that in addition to creating a Frame the code also checks to see if the app was previously terminated so that you can load any state/data that the user may need when the app is launched again. If you’re new to the lifecycle of Windows 8 store apps the following image shows how an app can be running, suspended, and terminated.   If the user switches from an app they’re running the app will be suspended in memory. The app may stay suspended or may be terminated depending on how much memory the OS thinks it needs so it’s important to save state in case the application is ultimately terminated and has to be started fresh. Although I won’t cover saving application state here, additional information can be found at http://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh465099.aspx. Another method in App.xaml.cs named OnSuspending() is also included in App.xaml.cs that can be used to store state as the user switches to another application:   /// <summary> /// Invoked when application execution is being suspended. Application state is saved /// without knowing whether the application will be terminated or resumed with the contents /// of memory still intact. /// </summary> /// <param name="sender">The source of the suspend request.</param> /// <param name="e">Details about the suspend request.</param> private void OnSuspending(object sender, SuspendingEventArgs e) { var deferral = e.SuspendingOperation.GetDeferral(); //TODO: Save application state and stop any background activity deferral.Complete(); } The MainPage.xaml and MainPage.xaml.cs Files The Blank App project adds a file named MainPage.xaml that acts as the initial screen for the application. It doesn’t include anything aside from an empty <Grid> XAML element in it. The code-behind class named MainPage.xaml.cs includes a constructor as well as a method named OnNavigatedTo() that is called once the page is displayed in the frame.   /// <summary> /// An empty page that can be used on its own or navigated to within a Frame. /// </summary> public sealed partial class MainPage : Page { public MainPage() { this.InitializeComponent(); } /// <summary> /// Invoked when this page is about to be displayed in a Frame. /// </summary> /// <param name="e">Event data that describes how this page was reached. The Parameter /// property is typically used to configure the page.</param> protected override void OnNavigatedTo(NavigationEventArgs e) { } }   If you’re experienced with XAML you can switch to Design mode and start dragging and dropping XAML controls from the ToolBox in Visual Studio. If you prefer to type XAML you can do that as well in the XAML editor or while in split mode. Many of the controls available in WPF and Silverlight are included such as Canvas, Grid, StackPanel, and Border for layout. Standard input controls are also included such as TextBox, CheckBox, PasswordBox, RadioButton, ComboBox, ListBox, and more. MediaElement is available for rendering video or playing audio files. Some of the “common” XAML controls included out of the box are shown next:   Although XAML/C# Windows 8 store apps don’t include all of the functionality available in Silverlight 5, the core functionality required to build store apps is there with additional functionality available in open source projects such as Callisto (started by Microsoft’s Tim Heuer), Q42.WinRT, and others. Standard XAML data binding can be used to bind C# objects to controls, converters can be used to manipulate data during the data binding process, and custom styles and templates can be applied to controls to modify them. Although Visual Studio 2012 doesn’t support visually creating styles or templates, Expression Blend 5 handles that very well. To get started building the initial screen of a Windows 8 app you can start adding controls as mentioned earlier. Simply place them inside of the <Grid> element that’s included. You can arrange controls in a stacked manner using the StackPanel control, add a border around controls using the Border control, arrange controls in columns and rows using the Grid control, or absolutely position controls using the Canvas control. One of the controls that may be new to you is the AppBar. It can be used to add menu/toolbar functionality into a store app and keep the app clean and focused. You can place an AppBar at the top or bottom of the screen. A user on a touch device can swipe up to display the bottom AppBar or right-click when using a mouse. An example of defining an AppBar that contains an Edit button is shown next. The EditAppBarButtonStyle is available in the StandardStyles.xaml file mentioned earlier. <Page.BottomAppBar> <AppBar x:Name="ApplicationAppBar" Padding="10,0,10,0" AutomationProperties.Name="Bottom App Bar"> <Grid> <StackPanel x:Name="RightPanel" Orientation="Horizontal" Grid.Column="1" HorizontalAlignment="Right"> <Button x:Name="Edit" Style="{StaticResource EditAppBarButtonStyle}" Tag="Edit" /> </StackPanel> </Grid> </AppBar> </Page.BottomAppBar> Like standard XAML controls, the <Button> control in the AppBar can be wired to an event handler method in the MainPage.Xaml.cs file or even bound to a ViewModel object using “commanding” if your app follows the Model-View-ViewModel (MVVM) pattern (check out the MVVM Light package available through NuGet if you’re using MVVM with Windows 8 store apps). The AppBar can be used to navigate to different screens, show and hide controls, display dialogs, show settings screens, and more.   The Package.appxmanifest File The Package.appxmanifest file contains configuration details about your Windows 8 store app. By double-clicking it in Visual Studio you can define the splash screen image, small and wide logo images used for tiles on the start screen, orientation information, and more. You can also define what capabilities the app has such as if it uses the Internet, supports geolocation functionality, requires a microphone or webcam, etc. App declarations such as background processes, file picker functionality, and sharing can also be defined Finally, information about how the app is packaged for deployment to the store can also be defined. Summary If you already have some experience working with XAML technologies you’ll find that getting started building Windows 8 applications is pretty straightforward. Many of the controls available in Silverlight and WPF are available making it easy to get started without having to relearn a lot of new technologies. In the next post in this series I’ll discuss additional features that can be used in your Windows 8 store apps.

    Read the article

  • Guidance: A Branching strategy for Scrum Teams

    - by Martin Hinshelwood
    Having a good branching strategy will save your bacon, or at least your code. Be careful when deviating from your branching strategy because if you do, you may be worse off than when you started! This is one possible branching strategy for Scrum teams and I will not be going in depth with Scrum but you can find out more about Scrum by reading the Scrum Guide and you can even assess your Scrum knowledge by having a go at the Scrum Open Assessment. You can also read SSW’s Rules to Better Scrum using TFS which have been developed during our own Scrum implementations. Acknowledgements Bill Heys – Bill offered some good feedback on this post and helped soften the language. Note: Bill is a VS ALM Ranger and co-wrote the Branching Guidance for TFS 2010 Willy-Peter Schaub – Willy-Peter is an ex Visual Studio ALM MVP turned blue badge and has been involved in most of the guidance including the Branching Guidance for TFS 2010 Chris Birmele – Chris wrote some of the early TFS Branching and Merging Guidance. Dr Paul Neumeyer, Ph.D Parallel Processes, ScrumMaster and SSW Solution Architect – Paul wanted to have feature branches coming from the release branch as well. We agreed that this is really a spin-off that needs own project, backlog, budget and Team. Scenario: A product is developed RTM 1.0 is released and gets great sales.  Extra features are demanded but the new version will have double to price to pay to recover costs, work is approved by the guys with budget and a few sprints later RTM 2.0 is released.  Sales a very low due to the pricing strategy. There are lots of clients on RTM 1.0 calling out for patches. As I keep getting Reverse Integration and Forward Integration mixed up and Bill keeps slapping my wrists I thought I should have a reminder: You still seemed to use reverse and/or forward integration in the wrong context. I would recommend reviewing your document at the end to ensure that it agrees with the common understanding of these terms merge (forward integration) from parent to child (same direction as the branch), and merge  (reverse integration) from child to parent (the reverse direction of the branch). - one of my many slaps on the wrist from Bill Heys.   As I mentioned previously we are using a single feature branching strategy in our current project. The single biggest mistake developers make is developing against the “Main” or “Trunk” line. This ultimately leads to messy code as things are added and never finished. Your only alternative is to NEVER check in unless your code is 100%, but this does not work in practice, even with a single developer. Your ADD will kick in and your half-finished code will be finished enough to pass the build and the tests. You do use builds don’t you? Sadly, this is a very common scenario and I have had people argue that branching merely adds complexity. Then again I have seen the other side of the universe ... branching  structures from he... We should somehow convince everyone that there is a happy between no-branching and too-much-branching. - Willy-Peter Schaub, VS ALM Ranger, Microsoft   A key benefit of branching for development is to isolate changes from the stable Main branch. Branching adds sanity more than it adds complexity. We do try to stress in our guidance that it is important to justify a branch, by doing a cost benefit analysis. The primary cost is the effort to do merges and resolve conflicts. A key benefit is that you have a stable code base in Main and accept changes into Main only after they pass quality gates, etc. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft The second biggest mistake developers make is branching anything other than the WHOLE “Main” line. If you branch parts of your code and not others it gets out of sync and can make integration a nightmare. You should have your Source, Assets, Build scripts deployment scripts and dependencies inside the “Main” folder and branch the whole thing. Some departments within MSFT even go as far as to add the environments used to develop the product in there as well; although I would not recommend that unless you have a massive SQL cluster to house your source code. We tried the “add environment” back in South-Africa and while it was “phenomenal”, especially when having to switch between environments, the disk storage and processing requirements killed us. We opted for virtualization to skin this cat of keeping a ready-to-go environment handy. - Willy-Peter Schaub, VS ALM Ranger, Microsoft   I think people often think that you should have separate branches for separate environments (e.g. Dev, Test, Integration Test, QA, etc.). I prefer to think of deploying to environments (such as from Main to QA) rather than branching for QA). - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   You can read about SSW’s Rules to better Source Control for some additional information on what Source Control to use and how to use it. There are also a number of branching Anti-Patterns that should be avoided at all costs: You know you are on the wrong track if you experience one or more of the following symptoms in your development environment: Merge Paranoia—avoiding merging at all cost, usually because of a fear of the consequences. Merge Mania—spending too much time merging software assets instead of developing them. Big Bang Merge—deferring branch merging to the end of the development effort and attempting to merge all branches simultaneously. Never-Ending Merge—continuous merging activity because there is always more to merge. Wrong-Way Merge—merging a software asset version with an earlier version. Branch Mania—creating many branches for no apparent reason. Cascading Branches—branching but never merging back to the main line. Mysterious Branches—branching for no apparent reason. Temporary Branches—branching for changing reasons, so the branch becomes a permanent temporary workspace. Volatile Branches—branching with unstable software assets shared by other branches or merged into another branch. Note   Branches are volatile most of the time while they exist as independent branches. That is the point of having them. The difference is that you should not share or merge branches while they are in an unstable state. Development Freeze—stopping all development activities while branching, merging, and building new base lines. Berlin Wall—using branches to divide the development team members, instead of dividing the work they are performing. -Branching and Merging Primer by Chris Birmele - Developer Tools Technical Specialist at Microsoft Pty Ltd in Australia   In fact, this can result in a merge exercise no-one wants to be involved in, merging hundreds of thousands of change sets and trying to get a consolidated build. Again, we need to find a happy medium. - Willy-Peter Schaub on Merge Paranoia Merge conflicts are generally the result of making changes to the same file in both the target and source branch. If you create merge conflicts, you will eventually need to resolve them. Often the resolution is manual. Merging more frequently allows you to resolve these conflicts close to when they happen, making the resolution clearer. Waiting weeks or months to resolve them, the Big Bang approach, means you are more likely to resolve conflicts incorrectly. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   Figure: Main line, this is where your stable code lives and where any build has known entities, always passes and has a happy test that passes as well? Many development projects consist of, a single “Main” line of source and artifacts. This is good; at least there is source control . There are however a couple of issues that need to be considered. What happens if: you and your team are working on a new set of features and the customer wants a change to his current version? you are working on two features and the customer decides to abandon one of them? you have two teams working on different feature sets and their changes start interfering with each other? I just use labels instead of branches? That's a lot of “what if’s”, but there is a simple way of preventing this. Branching… In TFS, labels are not immutable. This does not mean they are not useful. But labels do not provide a very good development isolation mechanism. Branching allows separate code sets to evolve separately (e.g. Current with hotfixes, and vNext with new development). I don’t see how labels work here. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   Figure: Creating a single feature branch means you can isolate the development work on that branch.   Its standard practice for large projects with lots of developers to use Feature branching and you can check the Branching Guidance for the latest recommendations from the Visual Studio ALM Rangers for other methods. In the diagram above you can see my recommendation for branching when using Scrum development with TFS 2010. It consists of a single Sprint branch to contain all the changes for the current sprint. The main branch has the permissions changes so contributors to the project can only Branch and Merge with “Main”. This will prevent accidental check-ins or checkouts of the “Main” line that would contaminate the code. The developers continue to develop on sprint one until the completion of the sprint. Note: In the real world, starting a new Greenfield project, this process starts at Sprint 2 as at the start of Sprint 1 you would have artifacts in version control and no need for isolation.   Figure: Once the sprint is complete the Sprint 1 code can then be merged back into the Main line. There are always good practices to follow, and one is to always do a Forward Integration from Main into Sprint 1 before you do a Reverse Integration from Sprint 1 back into Main. In this case it may seem superfluous, but this builds good muscle memory into your developer’s work ethic and means that no bad habits are learned that would interfere with additional Scrum Teams being added to the Product. The process of completing your sprint development: The Team completes their work according to their definition of done. Merge from “Main” into “Sprint1” (Forward Integration) Stabilize your code with any changes coming from other Scrum Teams working on the same product. If you have one Scrum Team this should be quick, but there may have been bug fixes in the Release branches. (we will talk about release branches later) Merge from “Sprint1” into “Main” to commit your changes. (Reverse Integration) Check-in Delete the Sprint1 branch Note: The Sprint 1 branch is no longer required as its useful life has been concluded. Check-in Done But you are not yet done with the Sprint. The goal in Scrum is to have a “potentially shippable product” at the end of every Sprint, and we do not have that yet, we only have finished code.   Figure: With Sprint 1 merged you can create a Release branch and run your final packaging and testing In 99% of all projects I have been involved in or watched, a “shippable product” only happens towards the end of the overall lifecycle, especially when sprints are short. The in-between releases are great demonstration releases, but not shippable. Perhaps it comes from my 80’s brain washing that we only ship when we reach the agreed quality and business feature bar. - Willy-Peter Schaub, VS ALM Ranger, Microsoft Although you should have been testing and packaging your code all the way through your Sprint 1 development, preferably using an automated process, you still need to test and package with stable unchanging code. This is where you do what at SSW we call a “Test Please”. This is first an internal test of the product to make sure it meets the needs of the customer and you generally use a resource external to your Team. Then a “Test Please” is conducted with the Product Owner to make sure he is happy with the output. You can read about how to conduct a Test Please on our Rules to Successful Projects: Do you conduct an internal "test please" prior to releasing a version to a client?   Figure: If you find a deviation from the expected result you fix it on the Release branch. If during your final testing or your “Test Please” you find there are issues or bugs then you should fix them on the release branch. If you can’t fix them within the time box of your Sprint, then you will need to create a Bug and put it onto the backlog for prioritization by the Product owner. Make sure you leave plenty of time between your merge from the development branch to find and fix any problems that are uncovered. This process is commonly called Stabilization and should always be conducted once you have completed all of your User Stories and integrated all of your branches. Even once you have stabilized and released, you should not delete the release branch as you would with the Sprint branch. It has a usefulness for servicing that may extend well beyond the limited life you expect of it. Note: Don't get forced by the business into adding features into a Release branch instead that indicates the unspoken requirement is that they are asking for a product spin-off. In this case you can create a new Team Project and branch from the required Release branch to create a new Main branch for that product. And you create a whole new backlog to work from.   Figure: When the Team decides it is happy with the product you can create a RTM branch. Once you have fixed all the bugs you can, and added any you can’t to the Product Backlog, and you Team is happy with the result you can create a Release. This would consist of doing the final Build and Packaging it up ready for your Sprint Review meeting. You would then create a read-only branch that represents the code you “shipped”. This is really an Audit trail branch that is optional, but is good practice. You could use a Label, but Labels are not Auditable and if a dispute was raised by the customer you can produce a verifiable version of the source code for an independent party to check. Rare I know, but you do not want to be at the wrong end of a legal battle. Like the Release branch the RTM branch should never be deleted, or only deleted according to your companies legal policy, which in the UK is usually 7 years.   Figure: If you have made any changes in the Release you will need to merge back up to Main in order to finalise the changes. Nothing is really ever done until it is in Main. The same rules apply when merging any fixes in the Release branch back into Main and you should do a reverse merge before a forward merge, again for the muscle memory more than necessity at this stage. Your Sprint is now nearly complete, and you can have a Sprint Review meeting knowing that you have made every effort and taken every precaution to protect your customer’s investment. Note: In order to really achieve protection for both you and your client you would add Automated Builds, Automated Tests, Automated Acceptance tests, Acceptance test tracking, Unit Tests, Load tests, Web test and all the other good engineering practices that help produce reliable software.     Figure: After the Sprint Planning meeting the process begins again. Where the Sprint Review and Retrospective meetings mark the end of the Sprint, the Sprint Planning meeting marks the beginning. After you have completed your Sprint Planning and you know what you are trying to achieve in Sprint 2 you can create your new Branch to develop in. How do we handle a bug(s) in production that can’t wait? Although in Scrum the only work done should be on the backlog there should be a little buffer added to the Sprint Planning for contingencies. One of these contingencies is a bug in the current release that can’t wait for the Sprint to finish. But how do you handle that? Willy-Peter Schaub asked an excellent question on the release activities: In reality Sprint 2 starts when sprint 1 ends + weekend. Should we not cater for a possible parallelism between Sprint 2 and the release activities of sprint 1? It would introduce FI’s from main to sprint 2, I guess. Your “Figure: Merging print 2 back into Main.” covers, what I tend to believe to be reality in most cases. - Willy-Peter Schaub, VS ALM Ranger, Microsoft I agree, and if you have a single Scrum team then your resources are limited. The Scrum Team is responsible for packaging and release, so at least one run at stabilization, package and release should be included in the Sprint time box. If more are needed on the current production release during the Sprint 2 time box then resource needs to be pulled from Sprint 2. The Product Owner and the Team have four choices (in order of disruption/cost): Backlog: Add the bug to the backlog and fix it in the next Sprint Buffer Time: Use any buffer time included in the current Sprint to fix the bug quickly Make time: Remove a Story from the current Sprint that is of equal value to the time lost fixing the bug(s) and releasing. Note: The Team must agree that it can still meet the Sprint Goal. Cancel Sprint: Cancel the sprint and concentrate all resource on fixing the bug(s) Note: This can be a very costly if the current sprint has already had a lot of work completed as it will be lost. The choice will depend on the complexity and severity of the bug(s) and both the Product Owner and the Team need to agree. In this case we will go with option #2 or #3 as they are uncomplicated but severe bugs. Figure: Real world issue where a bug needs fixed in the current release. If the bug(s) is urgent enough then then your only option is to fix it in place. You can edit the release branch to find and fix the bug, hopefully creating a test so it can’t happen again. Follow the prior process and conduct an internal and customer “Test Please” before releasing. You can read about how to conduct a Test Please on our Rules to Successful Projects: Do you conduct an internal "test please" prior to releasing a version to a client?   Figure: After you have fixed the bug you need to ship again. You then need to again create an RTM branch to hold the version of the code you released in escrow.   Figure: Main is now out of sync with your Release. We now need to get these new changes back up into the Main branch. Do a reverse and then forward merge again to get the new code into Main. But what about the branch, are developers not working on Sprint 2? Does Sprint 2 now have changes that are not in Main and Main now have changes that are not in Sprint 2? Well, yes… and this is part of the hit you take doing branching. But would this scenario even have been possible without branching?   Figure: Getting the changes in Main into Sprint 2 is very important. The Team now needs to do a Forward Integration merge into their Sprint and resolve any conflicts that occur. Maybe the bug has already been fixed in Sprint 2, maybe the bug no longer exists! This needs to be identified and resolved by the developers before they continue to get further out of Sync with Main. Note: Avoid the “Big bang merge” at all costs.   Figure: Merging Sprint 2 back into Main, the Forward Integration, and R0 terminates. Sprint 2 now merges (Reverse Integration) back into Main following the procedures we have already established.   Figure: The logical conclusion. This then allows the creation of the next release. By now you should be getting the big picture and hopefully you learned something useful from this post. I know I have enjoyed writing it as I find these exploratory posts coupled with real world experience really help harden my understanding.  Branching is a tool; it is not a silver bullet. Don’t over use it, and avoid “Anti-Patterns” where possible. Although the diagram above looks complicated I hope showing you how it is formed simplifies it as much as possible.   Technorati Tags: Branching,Scrum,VS ALM,TFS 2010,VS2010

    Read the article

  • JMS Step 7 - How to Write to an AQ JMS (Advanced Queueing JMS) Queue from a BPEL Process

    - by John-Brown.Evans
    JMS Step 7 - How to Write to an AQ JMS (Advanced Queueing JMS) Queue from a BPEL Process ol{margin:0;padding:0} .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} .c4_7{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c3_7{vertical-align:top;width:234pt;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_7{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c16_7{background-color:#ffffff;padding:0pt 0pt 0pt 0pt} .c0_7{height:11pt;direction:ltr} .c9_7{color:#1155cc;text-decoration:underline} .c17_7{color:inherit;text-decoration:inherit} .c5_7{direction:ltr} .c18_7{background-color:#ffff00} .c2_7{background-color:#f3f3f3} .c14_7{height:0pt} .c8_7{text-indent:36pt} .c11_7{text-align:center} .c7_7{font-style:italic} .c1_7{font-family:"Courier New"} .c13_7{line-height:1.0} .c15_7{border-collapse:collapse} .c12_7{font-weight:bold} .c10_7{font-size:8pt} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes This example demonstrates how to write a simple message to an Oracle AQ via the the WebLogic AQ JMS functionality from a BPEL process and a JMS adapter. If you have not yet reviewed the previous posts, please do so first, especially the JMS Step 6 post, as this one references objects created there. 1. Recap and Prerequisites In the previous example, we created an Oracle Advanced Queue (AQ) and some related JMS objects in WebLogic Server to be able to access it via JMS. Here are the objects which were created and their names and JNDI names: Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2 . Create a BPEL Composite with a JMS Adapter Partner Link This step requires that you have a valid Application Server Connection defined in JDeveloper, pointing to the application server on which you created the JMS Queue and Connection Factory. You can create this connection in JDeveloper under the Application Server Navigator. Give it any name and be sure to test the connection before completing it. This sample will write a simple XML message to the AQ JMS queue via the JMS adapter, based on the following XSD file, which consists of a single string element: stringPayload.xsd <?xml version="1.0" encoding="windows-1252" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"                xmlns="http://www.example.org"                targetNamespace="http://www.example.org"                elementFormDefault="qualified">  <xsd:element name="exampleElement" type="xsd:string">  </xsd:element> </xsd:schema> The following steps are all executed in JDeveloper. The SOA project will be created inside a JDeveloper Application. If you do not already have an application to contain the project, you can create a new one via File > New > General > Generic Application. Give the application any name, for example JMSTests and, when prompted for a project name and type, call the project   JmsAdapterWriteAqJms  and select SOA as the project technology type. If you already have an application, continue below. Create a SOA Project Create a new project and select SOA Tier > SOA Project as its type. Name it JmsAdapterWriteAqJms . When prompted for the composite type, choose Composite With BPEL Process. When prompted for the BPEL Process, name it JmsAdapterWriteAqJms too and choose Synchronous BPEL Process as the template. This will create a composite with a BPEL process and an exposed SOAP service. Double-click the BPEL process to open and begin editing it. You should see a simple BPEL process with a Receive and Reply activity. As we created a default process without an XML schema, the input and output variables are simple strings. Create an XSD File An XSD file is required later to define the message format to be passed to the JMS adapter. In this step, we create a simple XSD file, containing a string variable and add it to the project. First select the xsd item in the left-hand navigation tree to ensure that the XSD file is created under that item. Select File > New > General > XML and choose XML Schema. Call it stringPayload.xsd  and when the editor opens, select the Source view. then replace the contents with the contents of the stringPayload.xsd example above and save the file. You should see it under the XSD item in the navigation tree. Create a JMS Adapter Partner Link We will create the JMS adapter as a service at the composite level. If it is not already open, double-click the composite.xml file in the navigator to open it. From the Component Palette, drag a JMS adapter over onto the right-hand swim lane, under External References. This will start the JMS Adapter Configuration Wizard. Use the following entries: Service Name: JmsAdapterWrite Oracle Enterprise Messaging Service (OEMS): Oracle Advanced Queueing AppServer Connection: Use an existing application server connection pointing to the WebLogic server on which the connection factory created earlier is located. You can use the “+” button to create a connection directly from the wizard, if you do not already have one. Adapter Interface > Interface: Define from operation and schema (specified later) Operation Type: Produce Message Operation Name: Produce_message Produce Operation Parameters Destination Name: Wait for the list to populate. (Only foreign servers are listed here, because Oracle Advanced Queuing was selected earlier, in step 3) .         Select the foreign server destination created earlier, AqJmsForeignDestination (queue) . This will automatically populate the Destination Name field with the name of the foreign destination, queue/USERQUEUE . JNDI Name: The JNDI name to use for the JMS connection. This is the JNDI name of the connection pool created in the WebLogic Server.JDeveloper does not verify the value entered here. If you enter a wrong value, the JMS adapter won’t find the queue and you will get an error message at runtime. In our example, this is the value eis/aqjms/UserQueue Messages URL: We will use the XSD file we created earlier, stringPayload.xsd to define the message format for the JMS adapter. Press the magnifying glass icon to search for schema files. Expand Project Schema Files > stringPayload.xsd and select exampleElement : string . Press Next and Finish, which will complete the JMS Adapter configuration. Wire the BPEL Component to the JMS Adapter In this step, we link the BPEL process/component to the JMS adapter. From the composite.xml editor, drag the right-arrow icon from the BPEL process to the JMS adapter’s in-arrow.   This completes the steps at the composite level. 3. Complete the BPEL Process Design Invoke the JMS Adapter Open the BPEL component by double-clicking it in the design view of the composite.xml. This will display the BPEL process in the design view. You should see the JmsAdapterWrite partner link under one of the two swim lanes. We want it in the right-hand swim lane. If JDeveloper displays it in the left-hand lane, right-click it and choose Display > Move To Opposite Swim Lane. An Invoke activity is required in order to invoke the JMS adapter. Drag an Invoke activity between the Receive and Reply activities. Drag the right-hand arrow from the Invoke activity to the JMS adapter partner link. This will open the Invoke editor. The correct default values are entered automatically and are fine for our purposes. We only need to define the input variable to use for the JMS adapter. By pressing the green “+” symbol, a variable of the correct type can be auto-generated, for example with the name Invoke1_Produce_Message_InputVariable. Press OK after creating the variable. Assign Variables Drag an Assign activity between the Receive and Invoke activities. We will simply copy the input variable to the JMS adapter and, for completion, so the process has an output to print, again to the process’s output variable. Double-click the Assign activity and create two Copy rules: for the first, drag Variables > inputVariable > payload > client:process > client:input_string to Invoke1_Produce_Message_InputVariable > body > ns2:exampleElement for the second, drag the same input variable to outputVariable > payload > client:processResponse > client:result This will create two copy rules, similar to the following: Press OK. This completes the BPEL and Composite design. 4. Compile and Deploy the Composite Compile the process by pressing the Make or Rebuild icons or by right-clicking the project name in the navigator and selecting Make... or Rebuild... If the compilation is successful, deploy it to the SOA server connection defined earlier. (Right-click the project name in the navigator, select Deploy to Application Server, choose the application server connection, choose the partition on the server (usually default) and press Finish. You should see the message ----  Deployment finished.  ---- in the Deployment frame, if the deployment was successful. 5. Test the Composite Execute a Test Instance In a browser, log in to the Enterprise Manager 11g Fusion Middleware Control (EM) for your SOA installation. Navigate to SOA > soa-infra (soa_server1) > default (or wherever you deployed your composite) and click on  JmsAdapterWriteAqJms [1.0] , then press the Test button. Enter any string into the text input field, for example “Test message from JmsAdapterWriteAqJms” then press Test Web Service. If the instance is successful, you should see the same text you entered in the Response payload frame. Monitor the Advanced Queue The test message will be written to the advanced queue created at the top of this sample. To confirm it, log in to the database as AQJMSUSER and query the MYQUEUETABLE database table. For example, from a shell window with SQL*Plus sqlplus aqjmsuser/aqjmsuser SQL> SELECT user_data FROM myqueuetable; which will display the message contents, for example Similarly, you can use the JDeveloper Database Navigator to view the contents. Use a database connection to the AQJMSUSER and in the navigator, expand Queues Tables and select MYQUEUETABLE. Select the Data tab and scroll to the USER_DATA column to view its contents. This concludes this example. The following post will be the last one in this series. In it, we will learn how to read the message we just wrote using a BPEL process and AQ JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

    Read the article

  • Problems with Google Maps API v3 + jQuery UI Tabs

    - by Bears will eat you
    There are a number of problems, which seem to be fairly well-known, when using the Google Maps API to render a map within a jQuery UI tab. I've seen SO questions posted about similar issues (here and here, for example) but the solutions there only seem to work for v2 of the Maps API. Other references I checked out are here and here, along with pretty much everything I could dig up through Googling. I've been trying to stuff a map (using v3 of the API) into a jQuery tab with mixed results. I'm using the latest versions of everything (currently jQuery 1.3.2, jQuery UI 1.7.2, don't know about Maps). This is the markup & javascript: <body> <div id="dashtabs"> <span class="logout"> <a href="go away">Log out</a> </span> <!-- tabs --> <ul class="dashtabNavigation"> <li><a href="#first_tab" >First</a></li> <li><a href="#second_tab" >Second</a></li> <li><a href="#map_tab" >Map</a></li> </ul> <!-- tab containers --> <div id="first_tab">This is my first tab</div> <div id="second_tab">This is my second tab</div> <div id="map_tab"> <div id="map_canvas"></div> </div> </div> </body> and $(document).ready(function() { var map = null; $('#dashtabs').tabs(); $('#dashtabs').bind('tabsshow', function(event, ui) { if (ui.panel.id == 'map_tab' && !map) { map = initializeMap(); google.maps.event.trigger(map, 'resize'); } }); }); function initializeMap() { // Just some canned map for now var latlng = new google.maps.LatLng(-34.397, 150.644); var myOptions = { zoom: 8, center: latlng, mapTypeId: google.maps.MapTypeId.ROADMAP }; return new google.maps.Map($('#map_canvas')[0], myOptions); } And here's what I've found that does/doesn't work (for Maps API v3): Using the off-left technique as described in the jQuery UI Tabs documentation (and in the answers to the two questions I linked) doesn't work at all. In fact, the best-functioning code uses the CSS .ui-tabs .ui-tabs-hide { display: none; } instead. The only way to get a map to display in a tab at all is to set the CSS width and height of #map_canvas to be absolute values. Changing the width and height to auto or 100% causes the map to not display at all, even if it's already been successfully rendered (using absolute width and height). I couldn't find it documented anywhere outside of the Maps API, but map.checkResize() won't work anymore. Instead, you have to fire a resize event by calling google.maps.event.trigger(map, 'resize'). If the map is not initialized inside of a function bound to a tabsshow event, the map itself is rendered correctly but the controls are not - most are just plain missing. So, here are my questions: Does anyone else have experience accomplishing this same feat? If so, how did you figure out what would actually work, since the documented tricks don't work for Maps API v3? What about loading tab content using Ajax as per the jQuery UI docs? I haven't had a chance to play around with it but my guess is that it's going to break Maps even more. What are the chances of getting it to work (or is it not worth trying)? How do I make the map fill the largest possible area? I'd like it to fill the tab and adapt to page resizes, much in the way that it's done over at maps.google.com. But, as I said, I appear to be stuck with applying only absolute width and height CSS to the map div. Sorry if this was long-winded but this might be the only documentation for Maps API v3 + jQuery tabs. Cheers!

    Read the article

  • Effectively implementing a game view using java

    - by kdavis8
    I am writing a 2d game in java. The game mechanics are similar to the Pokémon game boy advance series e.g. fire red, ruby, diamond and so on. I need a way to draw a huge map maybe 5000 by 5000 pixels and then load individual in game sprites to across the entirety of the map, like rendering a scene. Game sprites would be things like terrain objects, trees, rocks, bushes, also houses, castles, NPC's and so on. But i also need to implement some kind of camera view class that focuses on the player. the camera view class needs to follow the characters movements throughout the game map but it also needs to clip the rest of the map away from the user's field of view, so that the user can only see the arbitrary proximity adjacent to the player's sprite. The proximity's range could be something like 500 pixels in every direction around the player’s sprite. On top of this, i need to implement an independent resolution for the game world so that the game view will be uniform on all screen sizes and screen resolutions. I know that this does sound like a handful and may fall under the category of multiple questions, but the questions are all related and any advice would be very much appreciated. I don’t need a full source code listing but maybe some pointers to effective java API classes that could make doing what i need to do a lot simpler. Also any algorithmic/ design advice would greatly benefit me as well. example of what i am trying to do in source code form below package myPackage; /** * The Purpose of GameView is to: Render a scene using Scene class, Create a * clipping pane using CameraView class, and finally instantiate a coordinate * grid using Path class. * * Once all of these things have been done, GameView class should then be * instantiated and used jointly with its helper classes. CameraView should be * used as the main drawing image. CameraView is the the window to the game * world.Scene passes data constantly to CameraView so that the entire map flows * smoothly. Path uses the x and y coordinates from camera view to construct * cells for path finding algorithms. */ public class GameView { // Scene is a helper class to game view. it renders the entire map to memory // for the camera view. Scene scene; // Camera View is a helper class to game view. It clips the Scene into a // small image that follows the players coordinates. CameraView Camera; // Path is a helper class to game view. It observes and calculates the // coordinates of camera view and divides them into Grids/Cells for Path // finding. Path path; // this represents the player and has a getSprite() method that will return // the current frame column row combination of the passed sprite sheet. Sprite player; }

    Read the article

  • Hyperlinked, externalized source code documentation

    - by Dave Jarvis
    Why do we still embed natural language descriptions of source code (i.e., the reason why a line of code was written) within the source code, rather than as a separate document? Given the expansive real-estate afforded to modern development environments (high-resolution monitors, dual-monitors, etc.), an IDE could provide semi-lock-step panels wherein source code is visually separated from -- but intrinsically linked to -- its corresponding comments. For example, developers could write source code comments in a hyper-linked markup language (linking to additional software requirements), which would simultaneously prevent documentation from cluttering the source code. What shortcomings would inhibit such a software development mechanism? A mock-up to help clarify the question: When the cursor is at a particular line in the source code (shown with a blue background, above), the documentation that corresponds to the line at the cursor is highlighted (i.e., distinguished from the other details). As noted in the question, the documentation would stay in lock-step with the source code as the cursor jumps through the source code. A hot-key could switch between "documentation mode" and "development mode". Potential advantages include: More source code and more documentation on the screen(s) at once Ability to edit documentation independently of source code (regardless of language?) Write documentation and source code in parallel without merge conflicts Real-time hyperlinked documentation with superior text formatting Quasi-real-time machine translation into different natural languages Every line of code can be clearly linked to a task, business requirement, etc. Documentation could automatically timestamp when each line of code was written (metrics) Dynamic inclusion of architecture diagrams, images to explain relations, etc. Single-source documentation (e.g., tag code snippets for user manual inclusion). Note: The documentation window can be collapsed Workflow for viewing or comparing source files would not be affected How the implementation happens is a detail; the documentation could be: kept at the end of the source file; split into two files by convention (filename.c, filename.c.doc); or fully database-driven By hyperlinked documentation, I mean linking to external sources (such as StackOverflow or Wikipedia) and internal documents (i.e., a wiki on a subdomain that could cross-reference business requirements documentation) and other source files (similar to JavaDocs). Related thread: What's with the aversion to documentation in the industry?

    Read the article

  • Using ClearType Tuner in Windows 7

    - by Mysticgeek
    Back in Windows XP there was an important Power toy created to enable ClearType for users of LCD screens. Now it’s standard in Windows 7, but you may not know about it. So let’s take a look. Access Clear Type in Windows 7 Click on the Start Menu and type cleartype into the search box and hit Enter. It should be enabled by default, but if not just check the box to enable it. Now, in the next step, you can enable it for two or more monitors if you have them. Or you could select an individual one if it works best for one but not another. Some people might want it turned off if they have a CRT and a LCD monitor for example. Now you can go through the wizard and pick out what resolution works best for the monitor(s) you choose.   Just select the text in each step that looks best for you. Then finish it out… This is a cool trick you may not have known about that already exists in Windows 7, and it can definitely help you get the best look of the text on each screen if you’re using different monitors! You may have to experiment with some different settings to get what works best for you. If you’re using Vista or XP check out our article on tuning clear type font settings in Vista/XP. Similar Articles Productive Geek Tips Tune Your ClearType Font Settings in Windows VistaGeek Tip: Be Sure to Enable ClearType in Your XP Virtual MachineListen to Local FM Radio in Windows 7 Media CenterWhy Do My Windows Vista Fonts Look Horrible?Roundup: 16 Tweaks to Windows Vista Look & Feel TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

    Read the article

  • SQL SERVER – Best Reference – Wait Type – Day 27 of 28

    - by pinaldave
    I have great learning experience to write my article series on Extended Event. This was truly learning experience where I have learned way more than I would have learned otherwise. Besides my blog series there was excellent quality reference available on internet which one can use to learn this subject further. Here is the list of resources (in no particular order): sys.dm_os_wait_stats (Book OnLine) – This is excellent beginning point and official documentations on the wait types description. SQL Server Best Practices Article by Tom Davidson – I think this document goes without saying the BEST reference available on this subject. Performance Tuning with Wait Statistics by Joe Sack – One of the best slide deck available on this subject. It covers many real world scenarios. Wait statistics, or please tell me where it hurts by Paul Randal – Notes from real world from SQL Server Skilled Master Paul Randal. The SQL Server Wait Type Repository… by Bob Ward – A thorough article on wait types and its resolution. A MUST read. Tracking Session and Statement Level Waits by by Jonathan Kehayias – A unique article on the subject where wait stats and extended events are together. Wait Stats Introductory References By Jimmy May – Excellent collection of the reference links. Great Resource On SQL Server Wait Types by Glenn Berry – A perfect DMV to find top wait stats. Performance Blog by Idera – In depth article on top of the wait statistics in community. I have listed all the reference I have found in no particular order. If I have missed any good reference, please leave a comment and I will add the reference in the list. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Tracking Session and Statement Level Waits Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Evolution Of High Definition TV Viewing

    - by Gopinath
    The following guest post is written by Rob, who is also blogging on entertainment technology topics on iwantsky.com Gone are the days when you need to squint to be able to see the emotions on the faces of Humphrey Bogart and Ingrid Bergman as the lovers bid each other adieu in the classic film Casablanca. These days, watching an ordinary ant painstakingly carry a leaf in Animal Planet can be an exhilarating experience as you get to see not only the slightest movement but also the demarcation line between the insect’s head, thorax and abdomen. The crystal clear imagery was made possible by the sharp minds and the tinkering hands of the scientists that have designed the modern world’s HDTV. What is HDTV and what makes people so agog to have this new innovation in TV watching? HDTV stands for High Definition TV. Television viewing has indeed made a big leap. From the grainy black and whites, TV viewing had moved to colored TVs, progressed to SD TVs and now to HDTV. HDTV is the emerging trend in TV viewing as it delivers bigger and clearer pictures and better audio. Viewers can have a cinema-like TV viewing experience right in the comforts of their own home. With HDTV the viewer is allowed to have a better viewing range. With Standard (SD) TV, the viewer has to be at a distance that is from 3 to 6 times the size of the screen. HDTV allows the viewer to enjoy sharper and clearer images as it is possible to sit at a distance that is 1.5 or 3 times the size of the screen without noticing any image pixilation. Although HDTV appears to be a fairly new innovation, this system has actually existed in various forms years ago. Development of the HDTV was started in Europe as early as 1940s. However, the NTSC and the PAL/SECAM, the two analog TV standards became dominant and became popular worldwide. The analog TV was replaced by the digital TV platform in the 1990s. Even during the analog era, attempts have been made to develop HDTV. Japan has come out with MUSE system. However, due to channel bandwidth requirement concerns, the program was shelved. The entry of four organizations into the HDTV market spurred the development of a beneficial coalition. The AT&T, ATRC, MIT and Zenith HDTV combined forces. In 1993, a Grand Alliance was formed. This group is composed of researchers and HDTV manufacturers. A common standard for the broadcast system of HDTV was developed. In 1995, the system was tested and found successful. With the higher screen resolution of HDTV, viewing has never been more enjoyable. [Image courtesy: samsung] This article titled,Evolution Of High Definition TV Viewing, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • flash blocking javascript events

    - by jedierikb
    this is an edit of the original post now that I better understand the problem. now with source code! In IE, if body (or another html div has focus), then you keypress & click on flash at the same time, then release... a keyup event is never fired. It is not fired in javascript or in flash. Where is this keyup event? This is the order of event firing you get instead: javascriptKeyEvent:bodyDn ** currentFocuedElement: body javascriptKeyEvent:docDn ** currentFocuedElement: body actionScriptEvent::activate ** currentFocuedElement: [object] actionScriptEvent::mouseDown ** currentFocuedElement: [object] actionScriptEvent::mouseUp ** currentFocuedElement: [object] Subsequent keyup and keydown events are captured by flash, but that initial keyUp is never fired.. anywhere. And I need that keyup! Here is the html/javascript: <html> <head> <script type="text/javascript" src="p.js"></script> <script type="text/javascript" src="swfobject.js"></script> <script> function ic( evt ) { Event.observe( $("f1"), 'keyup', onKeyHandler.bindAsEventListener( this, "f1Up" ) ); Event.observe( $("f2"), 'keyup', onKeyHandler.bindAsEventListener( this, "f2Up" ) ); Event.observe( document, 'keyup', onKeyHandler.bindAsEventListener( this, "docUp" ) ); Event.observe( $("body"), 'keyup', onKeyHandler.bindAsEventListener( this, "bodyUp" ) ); Event.observe( window, 'keyup', onKeyHandler.bindAsEventListener( this, "windowUp" ) ); Event.observe( $("f1"), 'keydown', onKeyHandler.bindAsEventListener( this, "f1Dn" ) ); Event.observe( $("f2"), 'keydown', onKeyHandler.bindAsEventListener( this, "f2Dn" ) ); Event.observe( document, 'keydown', onKeyHandler.bindAsEventListener( this, "docDn" ) ); Event.observe( $("body"), 'keydown', onKeyHandler.bindAsEventListener( this, "bodyDn" ) ); Event.observe( window, 'keydown', onKeyHandler.bindAsEventListener( this, "windowDn" ) ); Event.observe( "clr", "mousedown", clearHandler.bindAsEventListener( this ) ); swfobject.embedSWF( "tmp.swf", "f2", "100%", "20px", "9.0.0.0", null, {}, {}, {} ); } function clearHandler( evt ) { clear( ); } function clear( ) { $("log").innerHTML = ""; } function onKeyHandler( evt, dn ) { logIt( "javascriptKeyEvent:"+dn ); } function AS2JS( wha ) { logIt( "actionScriptEvent::" + wha ); } function logIt( k ) { var id = document.activeElement; if (id.identify) { id = id.identify(); } $("log").innerHTML = k + " ** focuedElement: " + id + "<br>" + $("log").innerHTML; } Event.observe( window, 'load', ic.bindAsEventListener(this) ); </script> </head> <body id="body"> <div id="f1"><div id="f2" style="width:100%;height:20px; position:absolute; bottom:0px;"></div></div> <div id="clr" style="color:blue;">clear</div> <div id="log" style="overflow:auto;height:200px;width:500px;"></div> </body> </html> Here is the as3 code: package { import flash.display.Sprite; import flash.display.StageAlign; import flash.display.StageScaleMode; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.Event; import flash.external.ExternalInterface; public class tmpa extends Sprite { public function tmpa( ):void { extInt("flashInit"); stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; stage.addEventListener( KeyboardEvent.KEY_DOWN, keyDnCb, false, 0, true ); stage.addEventListener( KeyboardEvent.KEY_UP, keyUpCb, false, 0, true ); stage.addEventListener( MouseEvent.MOUSE_DOWN, mDownCb, false, 0, true ); stage.addEventListener( MouseEvent.MOUSE_UP, mUpCb, false, 0, true ); addEventListener( Event.ACTIVATE, activateCb, false, 0, true ); addEventListener( Event.DEACTIVATE, dectivateCb, false, 0, true ); } private function activateCb( evt:Event ):void { extInt("activate"); } private function dectivateCb( evt:Event ):void { extInt("deactivate"); } private function mDownCb( evt:MouseEvent ):void { extInt("mouseDown"); } private function mUpCb( evt:MouseEvent ):void { extInt("mouseUp"); } private function keyDnCb( evt:KeyboardEvent ):void { extInt( "keyDn" ); } private function keyUpCb( evt:KeyboardEvent ):void { extInt( "keyUp" ); } private function extInt( wha:String ):void { try { ExternalInterface.call( "AS2JS", wha ); } catch (ex:Error) { trace('ex: ' + ex); } } } }

    Read the article

  • How to set child unordered list position?

    - by Joel
    Hi folks. I have a nav bar with children unordered lists nested under the main navbar items. My problem is on the inner list, when I position absolute, the inner list is centered to the page, and when I position relative, it is positioning inline with the parent list. I'm trying to get the first child item to line up directly under it's parent. /* OUTER LIST STYLING */ div#navbar2 { position:relative; width: 100%; border-top: solid #000 1px; border-bottom: solid #546F8B 1px; background-color: #546F8B; } div#navbar2 ul#navbar { padding: 0; margin: 10px 0; font-family: Arial, Helvetica, sans-serif; font-size: 16px; letter-spacing:1px; color: #FFF; white-space: nowrap; } div#navbar2 ul#navbar li { margin: 0 2px; list-style-type: none; display: inline; } div#navbar2 li a { text-decoration: none; color: #fff; padding: 10px 10px; } div#navbar2 li a:link { color: #FFF: } div#navbar2 li a:visited { color: #ffffff; } div#navbar2 li a:hover { color: #000; background-color: #FDFFC9; } /* INNER LIST STYLING */ div#navbar2 ul#navbar li ul.innerlist{ display: none; color:#000; } div#navbar2 ul#navbar li ul.innerlist li{ color:#000; } div#navbar2 ul#navbar li:hover ul.innerlist { position: absolute; display: inline; left: 0; width: 100%; margin: 40px 0 0px 0px; padding: 0px; color:#000; } div#navbar2 li.innerlist a { text-decoration: none; color: #000; padding: 10px 10px; } div#navbar2 li.innerlist a:link { color: #000: } div#navbar2 li.innerlist a:visited { color: #000; } div#navbar2 li.innerlist a:hover { color: #000; background-color: #FDFFC9; } And my html: <div id="navbar2"> <ul id="navbar"> <li id="index"><a href="index.php">About Rattletree</a></li> <li id="upcomingshows"><a href="upcomingshows.php">Calendar</a></li> <li id="booking"><a href="booking.php">Contact</a> <ul class="innerlist"> <li class="innerlist"><a href="#">Booking</a></li> <li class="innerlist"><a href="#">press</a></li> </ul> </li> <li id="instruments"><a href="instruments.php">The Band</a> <ul class="innerlist"> <li class="innerlist"><a href="#">The Instruments</a></li> <li class="innerlist"><a href="#">The Players</a></li> </ul> </li> <li id="classes"><a href="classes.php">Sights &amp; Sounds</a> <ul class="innerlist"> <li class="innerlist"><a href="#">Listen</a></li> <li class="innerlist"><a href="#">photos</a></li> <li class="innerlist"><a href="#">video</a></li> </ul> </li> <li id"classes"><a href="classes.php">Workshops &amp; Classes</a></li> </ul> </div> Thanks for any help!

    Read the article

  • Sun Ray 3 Plus Appliance Announced

    - by [email protected]
    There were many of you out there wondering if Oracle was going to keep and add to the Sun Ray and Sun virtualized desktop product suite, there have been a number of affirmative statements over the last many months. However, none of them resound like this; the introduction of a new product pretty much proves the point. A couple minutes before 3:00, local time yesterday, Oracle announced the release of a new Sun Ray, appliance, the Sun Ray 3 Plus. This is the unit that will replace the SR 2 FS (which has been for sale now since the middle of last decade).  Physically it is about the same size as the 2 FS but there are some significant differences... As you can see there is no smart card reader in the front - that has moved to the top to ensure only one hand is required to insert the card.  There is also a larger surround on the card reader that lights up to show the user the card is being read (properly).  A new power on/off switch is on the front which essentially brings power consumption to ~0 watts, but there is also a new 'sleep' timer looking for 30 minutes of inactivity and then will drop the power consumption down to ~ 1watt. There are also 2 USB 2.0 ports are accessible on the front instead of one.  The standard mic in and headphone out ports are there as well.  There is even more interesting stuff on the back. From the top down there are two more USB 2.0 ports for a total of four, but then the Oracle "Peripheral Kit" keyboard includes a 3-port USB Hub, too.  There's a 10/100/1000 Ethernet port as well as a 1000 Mb SFP port.  Standard DB-9 Serial port and then two DVI ports.  Then there is the really big news.  Two DVI ports driving 2560 x 1600 resolution, each. Most PCs can't do that without adding an adapter card.Now the images I have here are ones taken on a prototype a couple months back.  They are essentially the same as the Production unit, but if you would like to see an image of the Production Sun Ray 3 Plus unit you can see one here. There is a full data sheet available here. So this is the first Oracle Sun Ray desktop appliance.  Proof that the product line lives on.  A very good start!

    Read the article

  • Binding collection indexes to a WPF DataGrid at runtime

    - by bearda
    After trying to develop our own control to display a table of data we stumbled on the WPF toolkit DataGrid and thought we were saved. A couple hours later I'm scratching my head trying to figure out if it can do what we really want it to do. The DataGrid seems to be based on displaying various properties of a single object, where I think I need something that can display a collection's items, I want to display a table of strings with a variable number of rows and a variable number of columns. Each row represents the state of a number of inputs at a given time. The number of samples may change, and the number of inputs may change at runtime. As a result, I can't create a custom object that represents a row with a property for each input. This makes the DataGrid binding more complicated, since I can't bind to a fixed property for each column. I thought I found a workaround for this by binding to ".[" + channelIndex + ]" but it hasn't worked out quite the way I wanted. Right now I have a collection of a collection of strings that represents the two-dimensional array of strings. I'm using ObservableCollection so string change event notifications work, but I can use any collection type needed. It looked like everything was working great until I realized that every row was showing the same line of data. Binding in C# is not my strong suit, so I'm kind of lost on what's going wrong. Is what I'm trying to do overall even possible with the WPF Toolkit DataGrid? using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using Microsoft.Windows.Controls; using System.ComponentModel; using System.Collections; using System.Collections.ObjectModel; namespace WRE.NGDAS.UILayer { /// <summary> /// Interaction logic for DataTableControl.xaml /// </summary> public partial class DataTableControl : UserControl { #region Constants private const int lineHeight = 25; #endregion #region Type Definitions private class TableChannelInfo { internal string ChannelName = string.Empty; internal int Column = 0; public override string ToString() { return ChannelName; } } internal class NotifyString : INotifyPropertyChanged { private string text = String.Empty; public event PropertyChangedEventHandler PropertyChanged; public string Text { get { return text; } set { text = value; NotifyPropertyChanged( "Text" ); } } public NotifyString(string newText) { text = newText; } protected void NotifyPropertyChanged( string propertyChanged ) { if ( PropertyChanged != null ) { PropertyChanged(this, new PropertyChangedEventArgs(propertyChanged)); } } } #endregion #region Private Data Members string[] channels = null; int numberFixed = 0; int numberOfRows = 0; ObservableCollection<ObservableCollection<NotifyString>> tableText = null; #endregion public DataTableControl( List<string> channelNames, List<string> nameToolTips, int numberFixedColumns, int numberRows ) { InitializeComponent(); numberFixed = numberFixedColumns; numberOfRows = numberRows; tableText = new ObservableCollection<ObservableCollection<NotifyString>>(); dataGrid.ItemsSource = tableText; channels = new string[channelNames.Count]; for (int channelIndex = 0; channelIndex < channelNames.Count; channelIndex++) { channels[channelIndex] = channelNames[channelIndex]; tableText.Add(new ObservableCollection<NotifyString>()); for (int i = 0; i < numberOfRows; i++) { tableText[channelIndex].Add( new NotifyString(String.Empty) ); } Binding textBinding = new Binding( ".[" + channelIndex + "]" ); textBinding.Mode = BindingMode.OneWay; textBinding.UpdateSourceTrigger = UpdateSourceTrigger.PropertyChanged; textBinding.Source = tableText[channelIndex]; DataGridTextColumn newColumn = new DataGridTextColumn(); newColumn.Header = channelNames[channelIndex]; newColumn.DisplayIndex = channelIndex; newColumn.Binding = textBinding; if ( channelIndex < numberFixed ) { newColumn.CanUserReorder = false; } dataGrid.Columns.Add(newColumn); } //Height = lineHeight + numberOfRows * lineHeight; } internal void UpdateChannelRow( int rowNumber, List<string> channelValues, DisplayColors color ) { if ( rowNumber < numberOfRows ) { for (int column = 0; column < channelValues.Count; column++) { if ( column < channels.GetLength(0) ) { tableText[column][rowNumber].Text = channelValues[column]; } } } } } }

    Read the article

  • IE6 + IE7 CSS problem with overflow hidden

    - by googletorp
    So I have created a slider for a homepage, that slides some images with a title and teaser text using jQuery. Everything works fine, and I went to check IE and found that IE 6 and 7 kills my slider css completely. I can't figure out why, but for some reason I can't hide the non active slides with overflow: hidden; I've tried tweaking the css back and forth, but haven't been able to figure out what's causing the problem. I've recreated the problem in a more isolated html page. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="da" lang="da" dir="ltr"> <head> <style> body { width: 900px; } .column-1 { width: 500px; float: left; } .column-2 { width: 200px; float: left; } .column-3 { width: 200px; float: left; } h4 { font-size: 16px; margin: 0 0 5px; } p { margin: 5px 0; } ul { margin: 0; padding: 0; width: 2000px; left: -499px; overflow: hidden; position: relative; } li { list-style: none; display: block; float: left; } .item-list { overflow: hidden; width: 499px; } img { display: block; } .infobox { background: black; padding: 10px 13px; margin-top: -74px; height: 54px; width: 473px; color: white; position: absolute; } .first { display: block; } </style> </head> <body> <div class="column-1"> <div class="item-list clearfix"> <ul> <li class="first"> <div class="node-slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 1</h4> <p>Teaser 1</p> </div> </div> </li> <li> <div class="slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 2</h4> <p>Teaser 2</p> </div> </div> </li> <li class="last"> <div class="slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 3</h4> <p>Teaser 3</p> </div> </div> </li> </ul> </div> </div> <div class="column-2"> ... </div> <div class="column-3"> ... </div> </body> </html> Any ideas as to why IE wont hide images outside div with class item-list?

    Read the article

  • CodePlex Daily Summary for Monday, December 13, 2010

    CodePlex Daily Summary for Monday, December 13, 2010Popular ReleasesRequest Tracker Data Access: 1.0.0.0: First releaseMicrosoft All-In-One Code Framework: All-In-One Code Framework 2010-12-13: Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for ASP.NET Name Description Owner CSASPNETCMD Run batch/cmd from ASP.NET (C#) YiXiang VBASPNETCMD Run batch/cmd from ASP.NET (VB) YiXiang VBASPNETAJAXWebChat Ajax web chat application (VB) JerryWeng CSASPNETAJAXWebChat Ajax web chat application (C#) JerryWeng CSASPNETCurrentOnlineUserList Get current online u...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...SQL Server PowerShell Extensions: 2.3.1 Production: Release 2.3.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 12 modules with 155 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.EnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework(??) 2010?12??????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?,???????ASP.NET, WinForm, Silverlight????12?Sample Code。???,??????????sample code。 ?????:http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??,??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????,??Email ????DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...New Projects.NET Tips Repository: This project is the source code repository for all the projects, samples, and tutorials posted at vahidnasiri.blogspot.com. Its main focus is on .NET programming.a hash implement by basic array and link list: a hash implement by basic array and link listApplication Essentials for WPF, Silverlight, and Windows Phone 7: Application essentials is a simplified, small footprint redux of the Structured MVVM and Color Blending projects and is used to build WPF, Silverlight, and Windows Phone 7 applications with an MVVM architecture.Bit.ly Button: Bit.ly Button lets you use the power of Bit.ly bookmarklet to shorten any webpage (especially on sites like Facebook and Twitter). It's like a sharing button, except it will shorten the link before you share on Facebook or Twitter.Check Dependency: Check Dependency is designed to identify the dependency problems in assemblies. It is a valuable assistant to a project hat has complex dependency in many assemblies.Circo: A product oriented towards the need of having a powerful tool improving the construction process of applications. User interface for creating Entity Dictionary, generating .Net classes and also SQL model. It provides a strong productivity oriented.CoralCubeDB: This is the db for coralcube.Dotnet.Samples: Microsoft® .NET™ sample projects Created by Nano Taboada under a MIT License All projects have been coded using Microsoft(R) Visual Studio(R) 2010 mostly targeting framework version 4.0 Get a free copy of Visual C# 2010 Express at http://tinyurl.com/visualstudio2010expressElasticity: An library implementation of the Scheduler-Agent-Supervisor pattern. http://vasters.com/clemensv/2010/09/28/Cloud+Architecture+The+SchedulerAgentSupervisor+Pattern.aspxFacebook Graph Toolkit: get Graph API in ASP.NET.Grabbers: An object relational library and code generator designed to assist agile development teams generate data aware objects. InSimSniffer: InSimSniffer is a InSim packet sniffer for the racing simulator Live for Speed. It allows programmers to view and debug packets sent by the game.Irrlicht Wrapper for D: A D wrapper for the Irrlicht game engine generated by SWIG.Linq to LDAP: Linq provider built on top of System.DirectoryServices.Protocols for querying LDAP servers.ME Video Player: ME Video Player makes it easier for web developers to present medis on web pages. It's developed in C# and Silverlight by Mahyar Esteki.Mladi.com.hr: CMS system for croatian youth portalMouse Practise: A small project that creates a game to train a beginner to use mouse. Developer's Blog : http://shekhar-pro.blogspot.com Follow on Twitter : http://twitter.com/samajshekharMVVMKit: MVVMKit makes it easier to create WPF applications using the MVVM pattern.mygully-searcher: MyGully-Searcher makes it easier for Mygully-Forum-Users to search the forums for downloads. You'll no longer have to click to all forums. It's developed in VB.Net.NBooks Accounting: A simple clone to Quickbooks.Projeto Teste do curso de Pós graduação em Engenharia de Software.: Projeto teste do curso de pós graduação em Engenharia de Software. Códigos exemplos em Javascript e outros. Nayanne Araújo Bonifácio.Razor Reports - a Visualizer for the DotNetNuke Reports Module: Razor Reports is a Visualizer for the DotNetNuke Reports ModuleSiteGrabber: Groepsopdracht 2Supermarket: Hat: tTheSharePage: Project contains the core library for use in my website that i am developing for my NIIT project work. (The website will integrate facebook and twitter in a single website) The library features full custom developed facebook and twitter sdk library that can even be reused.Tip Of Day SharePoint WebPart: Tip Of Day webpartTranslit Hebrew to Russian: Application, which can translit Hebrew text into Russian.WP7 Thai Text Input: WP7 Thai text input makes it possible to enter Thai characters in WP7. It's developed in C# and were used in some of the CoreSharp's WP7 apps.

    Read the article

  • SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big

    - by pinaldave
    After reading my earlier article SQL SERVER – master Database Log File Grew Too Big, I received an email recently from another reader asking why does the log file of model database grow every day when he is not carrying out any operation in the model database. As per the email, he is absolutely sure that he is doing nothing on his model database; he had used policy management to catch any T-SQL operation in the model database and there were none. This was indeed surprising to me. I sent a request to access to his server, which he happily agreed for and within a min, we figured out the issue. He was taking the backup of the model database every day taking the database backup every night. When I explained the same to him, he did not believe it; so I quickly wrote down the following script. The results before and after the usage of the script were very clear. What is a model database? The model database is used as the template for all databases created on an instance of SQL Server. Any object you create in the model database will be automatically created in subsequent user database created on the server. NOTE: Do not run this in production environment. During the demo, the model database was in full recovery mode and only full backup operation was performed (no log backup). Before Backup Script Backup Script in loop DECLARE @FLAG INT SET @FLAG = 1 WHILE(@FLAG < 1000) BEGIN BACKUP DATABASE [model] TO  DISK = N'D:\model.bak' SET @FLAG = @FLAG + 1 END GO After Backup Script Why did this happen? The model database was in full recovery mode and taking full backup is logged operation. As there was no log backup and only full backup was performed on the model database, the size of the log file kept growing. Resolution: Change the backup mode of model database from “Full Recovery” to “Simple Recovery.”. Take full backup of the model database “only” when you change something in the model database. Let me know if you have encountered a situation like this? If so, how did you resolve it? It will be interesting to know about your experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >