Search Results

Search found 34341 results on 1374 pages for 'link local'.

Page 358/1374 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

  • Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

    - by TheSamFrom1984
    2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

    Read the article

  • We Found 100 Manufacturing Heros That Focus on Innovation!

    - by Stephen Slade
    There’s a good piece written by Ann Grackin of ChainLink Research on the Manufacturing Leadership 100 Awards program held recently in Palm Beach Fl, Apr 30-May 3, 2012.  This article (link below) highlights the summary of the Summit with specific focus on manufacturing innovation.  There were several informative keynotes and sessions from industrial leaders who are leveraging the latest tools and technologies to make better decisions. Ann writes that she was a panelist with Cindy Reese, SVP, Worldwide Operations, Oracle; and Steven Tungate, VP/GM, Supply Chain & Innovation, Toshiba America Business Solutions about Factories and Supply Networks of the Future. Ann writes “So what are these manufacturers doing? Significant rationalization of the supply base (Toshiba, especially, has this issue since they have a long history of many acquisitions), streamlining production to increase productivity, and looking for lower-cost countries for manufacturing….  No doubt firms have global customer bases, so they need to be present in these markets. However, a low-cost-country manufacturing source does introduce more risk in the supply chain. And that was discussed. Quality, security, and intellectual property protection were the critical global manufacturing issues also discussed. “Cindy (Reese) told a fascinating story about Oracle’s acquisition of Sun and the supply chain that was subsequently created. Here was one of the key points: Although Oracle sells on a global basis, they now do their own factory-installed software. This keeps potential ‘factory-installed malware’ from getting into the servers at contract manufacturers, and prevents pirated software. In this way, Oracle ensures that they deliver the quality and security people expect”. Learn more about the Manufacturing Leadership 100 program from Manufacturing Executive at: http://www.mlsummit.com/ Full Article Link:  http://www.clresearch.com/research/detail.cfm?guid=52327213-3048-79ED-99D4-E433DA64D4F0

    Read the article

  • New cloud development workflow using Github, Cloud9ide and CloudFoundry.

    - by weng
    So time is changing towards cloud development/computing. I'm trying to get the new "cloud" workflow based on the services I'm going to use: Github, Cloud9ide and CloudFoundry. Here is what is on my mind: Github acts like a central (main repo) just like yesterday's local filesystem. Every service will base it service upon this main repo. Workflow: Github: I create a new Github repo served as main repo for the project. Cloud9ide. I open my Github repo and write my tests and implementation (BDD/TDD). When I'm ready I save (commit) it to main repo on Github. X: A running instance of Jenkins detects someone has committed and fetches the latest commit, builds, deploys, tests (yeti and/or selenium) and reports if the tests were passed or not. If not, I make another commit til all tests are passing. X: I run the CloudFoundry commands to push the main Github repo to CloudFoundry's server and it will deploy my app automatically. What I'm still confused about is where this X environment will be. On a local server where I have to install Jenkins? Or could I install it on Cloud9ide (when java is supported) or will it be on another cloud service? Also, that X environment has to be able to fetch (clone) the Github repo and run the build scripts. And since the concept of Cloud9ide is very new and there haven't been any other predecessors I really wonder how the workflow will look like. We all know Github's workflow. We now know CloudFoundry's workflow (deploy/scale with a restful API/command line tool). But how Cloud9Ide will operate is still somewhat unclear to me. Someone on Cloud9ide mentioned that there will be buttons like deploy so I can deploy with one click. But that I guess will depend on what services that deploy process will hook up into etc. Could someone enlighten this cloud workflow topic and fill in the gaps. Thanks.

    Read the article

  • How to edit semi-plaintext file and maintaining character structure?

    - by Raul
    I am using a software (Groupmail from Infacta) that uses exact / absolute %PATHS% for saving some settings in specific semi-plaintext file. This is a really bad idea because you can't move to USER folder, or like my case it does not work after migrating to a new computer with different language. For example: C:\Documents and Settings\USER\Local Settings\Application Data\Infacta is different than C:\Documents and Settings\USER\Configuración local\Datos de programa\Infacta Obviously, the software does not work well. I tried to solve this using Find/Replace the new PATH with Notepad++. While the Groupmail software loads well and shows settings correctly, the software fails when trying to save data on that file. I guess this is because length or number of replaced characters is different and also it corrupt the file. Please could you help me to edit this file maintaining file integrity / structure?

    Read the article

  • Can SATA be used to connect computers?

    - by André
    Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

    Read the article

  • Apache redirecting: reason unknown

    - by Sinan
    I have a simple php script. The script is not important. It just prints out $_SERVER. When I request an URL like www.server.com/?ref=bar everything is fine. However if the request contains something like www.server.com/?ref=http://www.test.com (?ref=http%3A%2F%2Fwww.test.com) the server redirects to 403.shtml. No redirect for http://x but redirects http://x.y As far as I can understand somehow the server doesn't like "http://x". It always redirects to 403.shtml when there is a valid query string in the form of a valid url. my .htacess file is the same both on my server and local test server and local test server behaves as expected (no redirects). So I don't it is related to .htaccess. I'm on shared host on Hostgator. Can anyone help? Edit: Here's the .htaccess file Options +FollowSymLinks RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?$1 [L,QSA] When there is an http://xx.x it redirects to 403 even if there is physical file. However if I remove the .htaccess redirect to 403 also disappears. But I need the above .htaccess file. Is there a way to get around this?

    Read the article

  • How do I find a qualified web designer in my area?

    - by Incognito
    I just sent out emails to five local web design companies to my area asking to take drawings to HTML/CSS/jQuery. None of the ones who accepted the deal seem suitable to myself. Others rejected the offer because they wanted to 'provide an end-to-end solution' or are 'booked till June'. The local companies did not seem suitable to myself because my review process is this: goto their website, do a view-source. I'll see really weird things (contact us forms that go nowhere), really old things (mm_menu.js), and portfolios that are non-existent (aren't on the site, don't link anywhere, or otherwise). The company would like to hire as locally as they can rather than out-source to another country. Answers I'm looking for Processes you use when searching for someone How you qualify their aptitude for the project Anything that you think I'm doing wrong, or should be doing also. Answers I'm not looking for: "Hello sir please contact me we do everything for 10 dolla." My bud's great at this stuff, call him. example.com is the best for this.

    Read the article

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

  • Is Zscalar's HTTPS Everywhere for IE affiliated with EFF?

    - by noloader
    The Electronic Frontier Foundation has a tool called HTTPS Everywhere for Firefox, Chrome and Opera. But they don't list Internet Explorer. There is a company called Zscalar that provides HTTPS Everywhere for Internet Explorer. I can't determine if the EFF approves of Zscalar's IE extension, or if the company hijacked the EFF tool's name. The only mention of Zscalar on the EFF website is the HTTPS Everywhere Atlas. The closest I can find from Zscalar are link backs on the Zscalar website and a Zscalar PDF that points back to the EFF website. The EFF tool is free, open source and can be audited, but I don't see similar governance for Zscalar's tool. For example, I don't see mention of source code at HTTPS Everywhere for Internet Explorer. And it looks like there's a "Free Trial" for HTTPS Everywhere for Internet Explorer (see the link on the right). Is Zscalar's HTTPS Everywhere for IE affiliated with EFF?

    Read the article

  • Windows Azure Virtual Machines - Make Sure You Follow the Documentation

    - by BuckWoody
    To create a Windows Azure Infrastructure-as-a-Service Virtual Machine you have several options. You can simply select an image from a “Gallery” which includes Windows or Linux operating systems, or even a Windows Server with pre-installed software like SQL Server. One of the advantages to Windows Azure Virtual Machines is that it is stored in a standard Hyper-V format – with the base hard-disk as a VHD. That means you can move a Virtual Machine from on-premises to Windows Azure, and then move it back again. You can even use a simple series of PowerShell scripts to do the move, or automate it with other methods. And this then leads to another very interesting option for deploying systems: you can create a server VHD, configure it with the software you want, and then run the “SYSPREP” process on it. SYSPREP is a Windows utility that essentially strips the identity from a system, and when you re-start that system it asks a few details on what you want to call it and so on. By doing this, you can essentially create your own gallery of systems, either for testing, development servers, demo systems and more. You can learn more about how to do that here: http://msdn.microsoft.com/en-us/library/windowsazure/gg465407.aspx   But there is a small issue you can run into that I wanted to make you aware of. Whenever you deploy a system to Windows Azure Virtual Machines, you must meet certain password complexity requirements. However, when you build the machine locally and SYSPREP it, you might not choose a strong password for the account you use to Remote Desktop to the machine. In that case, you might not be able to reach the system after you deploy it. Once again, the key here is reading through the instructions before you start. Check out the link I showed above, and this link: http://technet.microsoft.com/en-us/library/cc264456.aspx to make sure you understand what you want to deploy.  

    Read the article

  • How to work with Firefox nightly build [minefield]

    - by anirudha
    Most of developer love Firefox for their plugin who support for making development easier and faster. many of us use Firefox nightly build aka minefield who update daily. there is a little problem in minefield that there is less plugin on addons site of mozilla for Firefox nightly [minefield]. a solution for this problem is that you need to install the plugin who you want in nightly build from the developer site instead of add-ons site of Mozilla. the reason for that is all many of popular plugin in development for support Firefox 4. How to install follow the thing as mine : go to minefield > addons or toolbar  > addons you see a list of plugin who is not suitable for minefield now go to more link of plugin who you want to get work in Firefox 4. When you click their you go to plugin page on addons site of mozilla or maybe redirect you to developer site. if they show you plugin page then go to developer site by click on link more about developer. now you find that on the developer site they give you the same version or maybe new then you found on mozilla addons site. install the plugin and restart the minefield. you see that most of plugin now work.

    Read the article

  • Missing Wireless access point

    - by nvcnvn
    I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

    Read the article

  • Unable to connect to mysql through JDBC connector through Tomcat or externally.

    - by iftrue
    I've installed a stock mysql 5.5 installation, and while I can connect to the mysql service via the mysql command, and the service seems to be running, I cannot connect to it through spring+tomcat or from an external jdbc connector. I'm using the following URL: jdbc:mysql://myserver.com:myport/mydb with proper username/password, but I receive the following message: server.com: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. the driver has not received any packets from the server. and tomcat throws: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server. sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) Which seems to be the same issue as if I try to connect externally.

    Read the article

  • How to disable Yoxos popups in Eclipse on Linux

    - by MikeN
    I used the http://eclipsesource.com/en/yoxos/yoxos-ondemand/? tool to build an Eclipse distribution, but they keep giving these annoying Yoxos popups. I don't even get whether Yoxos is free or paid or just annoying as heck. How do you get rid of these Yoxos popups? This is the text of the popup: POPUP: Thank you for evaluating Pydev Extensions. If you wish to license Pydev Extensions, please visit the link below for instructions on how to buy your license: Buy When you license it, not only will you get rid of this dialog, but you will also help fostering the Pydev Open Source version. If you wish more information on the available features, you can check it on the link below: Features Matrix Or you may browse the homepage starting at its initial page: Pydev Extensions Main Page The links don't allow you to register buy the PyDev extensions. How can I switch to free pydev extensions? My other eclipse installs I just used the free PyDev and it is exactly the same.

    Read the article

  • Running PHP 5.2 FastCGI + Apache on CentOS 5 issue

    - by Goran
    I am trying to setup 2 versions of PHP on Centos 5.9 using this tutorial: http://linuxplayer.org/2011/05/intall-multiple-version-of-php-on-one-server. I have followed I have installed default 5.4.19, and I was trying to setup another 5.2.17 PHP version to be run with Fast CGI and I followed the second part completely. However, when I try to run http://web2.example.com it returns 500 error message. In the apache log there are only 2 lines that repeat: [notice] mod_fcgid: call /var/www/web2/index.php with wrapper /usr/local/php52/bin/fcgiwrapper.sh and [notice] mod_fcgid: process /var/www/web2/index.php(25250) exit(server exited), terminated by calling exit(), return code: 255 Please note that I had to add .php at the and of the FCGIWrapper because apache would not start without it: FCGIWrapper /usr/local/php52/bin/fcgiwrapper.sh .php Also please note that http://web1.example.com with PHP 5.4.19 is working absolutely fine. Please help. Thank you very much in advance.

    Read the article

  • Textures quality issues with Libgdx

    - by user1876708
    I have drawn several vector objets and characters ( in Adobe Illustrator ) for my game on Android. They are all scalable at any size without any quality losses ( of course it's vector ^^ ). I have tried to simulate my gameboard directly on Illustrator just before setting my assests on libdgx to implement them in my game. I set all the objects at the good size, so that they fit perfectly on my XHDPI device I am running my test on. As you can see it works great ( for me at least ^^ ), the PNG quality is good for me, as expected ! So I have edited all my PNG at this size, set my assets on libgdx and build my game apk. And here is a screenshot of my gameboard ( don't pay attention at the differences of placing and objects, but check at the objets presents on both screenshot ). As you can see, I have a loss of my PNG quality in the game. It can be seen clealry on the hedgehog PNG, but also ( but not as obvious ) on the mushroom ( check at the outline ) and the hole PNG. If you really pay attention, on every objects, you can see pixels that are not visible on my first screenshot. And I just can't figure out why this is happening Oo If you have any ideas, you are very welcome ! Thanks. PS : You can check more clearly the 2 gameboard on this two links ( look at them at 100%, display at high resolution ) : Good quality link, from Illustrator Poor quality link, from the game Second phase of tests : We display an object ( the hedgehog ) on our main menu screen to see how it looks like. The things is that it looks like he is suppose to, which means, high quality with no pixels. The hedgehog PNG is coming from an atlas : layer.addActor(hedgehog); No loss of quality with this method So we think the problem is comming from the method we are using to display it on our gameboard : blocks[9][3] = new Block(TextureUtils.hedgehog, new Vector2(9, 3)); the block is getting the size from the vector we are associating to it, but we have a loss of quality with this method.

    Read the article

  • How can I run this script on startup, restart, and shutdown?

    - by Exeleration-G
    I'm using Ubuntu 11.10. I've written a script, that synchronises a directory in ~ with a directory on /dev/sda4, using Unison. Before, I had this script running every five minutes with no problems, using crontab. Right now, I want to execute this script at startup, restart and shutdown only. This is what the script looks like: #!/bin/bash unison -perms 0 -batch "/mnt/Data/Syncfolder/" "/home/myname/Syncfolder/" My crontab configuration was as follows: m h dom mon dow command 0,5,10,15,20,25,30,35,40,45,50,55 * * * * sh /usr/local/bin/s4lj.bash Note that I copied the script from ~ to /usr/local/bin/ first, to avoid root problems. I've read How to execute script on shutdown? and How to write an init script that will execute an existing start script?. After doing that, I've done this: I've made s4lj.bash executable, and then copied it to /etc/init.d/. For startup, I've made a symlink in /etc/rc2.d/ to /etc/init.d/s4lj.bash, and renamed it to S70s4lj.bash. For restart, I've made a symlink in /etc/rc6.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. For shutdown, I've made a symlink in /etc/rc0.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. Still, the script won't be run in any of these situations. How can I make the script get executed? I'd be happiest with a proper *.conf file in /etc/init. Thanks in advance.

    Read the article

  • renaming hard drives (sdc to sdb) on the fly

    - by w00t
    ata2: link is slow to respond, please be patient (ready=0) kernel: [2761026.198796] ata2: soft resetting link kernel: [2761031.226669] ata2.00: disabled kernel: [2761031.226720] ata2: EH complete kernel: [2761031.226753] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK After receiving the error above, I couldn't access /dev/sdb anymore. Not wanting to restart the server, I rescanned for the device using echo "- - -" > /sys/class/scsi_host/host1/scan and it readded the drive as /dev/sdc. From what I have found, I need to use echo "scsi add-single-device 0 0 3 0" > /proc/scsi/scsi, "3" being the SCSI ID which corresponds to sdb. Everything nice up to the point I execute the command and get -bash: echo: write error: Invalid argument. All the solutions point to using this method, but I am unable to. Any other method available? Debian 5.0.8 - 2.6.26-1-686

    Read the article

  • Add a remote printer over ssh on OSX?

    - by GradGuy
    I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

    Read the article

  • Hotlinking images in Outlook emails

    - by Alexander Voglund
    I want to create an email with a signature that contains an external image. For example, I would like to always include my SuperUser flair in my signature like so: http://superuser.com/users/flair/53525.png This can be done if I insert an image and select the above source. The problem occurs when I copy the image and paste it into the body of a new email. Outlook creates an embedded version and breaks the link to the original email. How can an image be pasted into Outlook and NOT be embedded (ie: the link to the original image is maintained?)

    Read the article

  • Chrome "refusing to execute script"

    - by TestSubject528491
    In the head of my HTML page, I have: <script src="https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js"></script> When I load the page in my browser (Google Chrome v 27.0.1453.116) and enable the developer tools, it says Refused to execute script from 'https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js' because its MIME type ('text/plain') is not executable, and strict MIME type checking is enabled. Indeed, the script won't run. Why does Chrome think this is a plaintext file? It clearly has a js file extension. Since I'm using HTML5, I omitted the type attribute, so I thought that might be causing the problem. So I added type="text/javascript" to the <script> tag, and got the same result. I even tried type="application/javascript" and still, same error. Then I tried changing it to type="text/plain" just out of curiosity. The browser did not return an error, but of course the JavaScript did not run. Finally I thought the periods in the filename might be throwing the browser off. So in my HTML, I changed all the periods to the URL escape character %2E: <script src="https://raw.github.com/cloudhead/less%2Ejs/master/dist/less-1%2E3%2E3.js"></script> This still did not work. The only thing that truly works (i.e. the browser does not give an error and the JS successfully runs) is if I download the file, upload it to a local directory, and then change the src value to the local file. I'd rather not do this since I'm trying to save space on my own website. How do I get the Chrome to recognize that the linked file is actually a javascript type?

    Read the article

  • Oracle 11g network configuration

    - by Kylo
    I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

    Read the article

  • Full speed internal switch bandwidth but per-port set external bandwidth?

    - by garg
    I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

    Read the article

  • Ways to polling server status

    - by Yijinsei
    Hi guys, I create the same question is stackoverflow, but I was recommended to post my question here. So I apologies for those who saw this post twice. I am try to create a JSP page that will show all the status in a group of local servers. Currently I create a schedule class that will constantly poll to check the status of the server with 30 second interval, with 5 second delay to wait for each server reply, and provide the JSP page with the information. However I find this way to be not accurate as it will take some time before the information of the schedule class to be updated. Do you guys have a better way to check the status of several server within a local network?

    Read the article

  • Problem with installing sqlite3 module for python 2.6 on an ubuntu system

    - by Hoang
    I need to run the sqlite3 module on python 2.6 in an ubuntu system. How do I install this module for Python 2.6? Somehow I don't have this module, it raises the error: >>> import sqlite3 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.6/sqlite3/__init__.py", line 24, in <module> from dbapi2 import * File "/usr/local/lib/python2.6/sqlite3/dbapi2.py", line 27, in <module> from _sqlite3 import * ImportError: No module named _sqlite3

    Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >