Search Results

Search found 24651 results on 987 pages for 'slackware linux'.

Page 359/987 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

  • DRBD not syncing between my nodes when IP is reset

    - by ramdaz
    I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

    Read the article

  • Symbol lookup error while starting pidgin in Arch

    - by Hossein Mobasher
    I have just installed pidgin from the source code that i downloaded from pidgin site, it compile correctly with using below commands : ./configure --disable-gtkspell ; make ; make install but, when i try to start pidgin from terminal, occurres an error :? pidgin: symbol lookup error: /usr/lib/libfarstream-0.1.so.0: undefined symbol: g_key_file_free how can i solve this problem ? Thanks for your attention :)

    Read the article

  • How do I securely execute commands as root via a web control panel?

    - by Chris J
    I would like to build a very simple PHP based web based control panel to add and remove users to/from and add and remove sections to/from nginx config files on my linode vps (Ubuntu 8.04 LTS). What is the most secure way of executing commands as root based on input from a web based control panel? I am loathe to run PHP as root (even if behind an IP tables firewall) for the obvious reasons. Suggestions welcome. It must be possible as several commercial (and bloated, for my needs) control panels offer similar functionality. Thanks

    Read the article

  • What permissions / ownership to set on PHP Sessions Folder when running FastCGI / PHP-FPM (as user "nobody")?

    - by Professor Frink
    I'm having trouble getting a number of scripts running because PHP-FPM can't write to my session folder: "2009/10/01 23:54:07 [error] 17830#0: *24 FastCGI sent in stderr: "PHP Warning: Unknown: open(/var/lib/php/session/sess_cskfq4godj4ka2a637i5lq41o5, O_RDWR) failed: Permission denied (13) in Unknown on line 0 PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0" while reading upstream" Obviously this is a permission issue; my session folder's owner/group is the webserver's user, NGINX. PHP-FPM runs as nobody though, and hence adding it to the nginx group is not so trivial. A temporary solution is to set the permissions of /var/lib/php/session to 777 - I have a feeling that's not the "best practice" though. What is the best practice when you need to assign a daemon write access to a folder, but it is running as nobody ?

    Read the article

  • Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

    - by ZiGi
    i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

    Read the article

  • NoMachine NX window closes after establishing connection

    - by blackicecube
    I am trying to use nomachine nx server and client. But somehow it doen't work. What happens is the following: Client starts up Client authenticates with Server The NoMachine window appears for 2-4 seconds The NoMachine window exists Somehow a "closeEvent" is sent. Here's what I see in the log file: [Thu Sep 24 11:20:37 2009]: Starting nxcomp with options: 'NX 299 Switch connection to: NX mode: unencrypted options: nx/nx,options=/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/options:1022'. [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor: opened file: [/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/session] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[246] str=[Initializing X protocol compression] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Initializing X protocol compression] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[247] str=[Established the display connection] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Established the display connection] [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: QClipboard: Unknown SelectionClear event received. [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: LoginDialog: Agent found closing windows... [Thu Sep 24 11:20:38 2009]: LoginDialog: setting automatic reconnection to true. [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: LoginDialog: closeEvent received! [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called begin [Thu Sep 24 11:20:38 2009]: LoginDialog: stopAllTimers [Thu Sep 24 11:20:38 2009]: LoginDialog: stopProgressTimer [Thu Sep 24 11:20:38 2009]: Utility::getPreferencesFile: 'nxclient' - '/home/foo/.nx/config/nxclient.cfg' [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Called destructor for protocol class [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called end Anyone with a helpful idea?

    Read the article

  • Set Users as chrooted for sftp, but allow user to login in SSH

    - by Eghes
    I have setup a ssh server on debian 7, to use sftp connection. I chrooted some user, with this config: Match Group sftpusers ChrootDirectory /sftp/%u ForceCommand internal-sftp But if i want login with one of this chrooted users in ssh console, they get logged, but autoclose the connection. In logs I see: Oct 17 13:39:32 xxxxxx sshd[31100]: Accepted password for yyyyyy from zzz.zzz.zzz.zzz port 7855 ssh2 Oct 17 13:39:32 xxxxxx[31100]: pam_unix(sshd:session): session opened for user yyyyyyyyyyyy by (uid=0) Oct 17 13:39:32 d00hyr-ea1 sshd[31100]: pam_unix(sshd:session): session closed for user yyyyyyyyyyyy How can I chroot a user only for sftp, and use it as a normal user for ssh?

    Read the article

  • Set up tunnel to HE.net and now only ipv6.google.com works, but other sites ping fine.

    - by AndrejaKo
    I'm setting up IPv6 using my router which is running OpenWRT, version Backfire 10.03.1-rc4. I made a tunnel using Hurricane Electric's tunnel broker and set it up on the router and I'm using RADVD to hand out IPv6 addresses. My problem is that on computers on the network, I can only access ipv6.google.com using a browser, but other sites seem to be loading forever and won't open in any browser. I can ping and traceroute to them fine, but can't open them with a browser. I can open any site normally with a browser from the router. Stopping firewall service on the router doesn't help, so it's probably not a firewall issue. All AAAA records resolve fine, so it's probably not a DNS issue. Computers on the network get their IPv6 addresses fine, so it's probably not a radvd issue. Similar setup worked fine for SixXs, but I'm having problems with my PoP there, so I decided to move to HE. Here are some traceroutes: From a client computer: Tracing route to ipv6.he.net [2001:470:0:64::2] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 62 ms 63 ms 62 ms andrejako-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 60 ms 60 ms 63 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 63 ms 68 ms 68 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 84 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 146 ms 147 ms 151 ms 10gigabitethernet4-4.core1.nyc4.he.net [2001:470:0:128::1] 7 200 ms 198 ms 202 ms 10gigabitethernet5-3.core1.lax1.he.net [2001:470:0:10e::1] 8 219 ms * 210 ms 10gigabitethernet2-2.core1.fmt2.he.net [2001:470:0:18d::1] 9 221 ms 338 ms 209 ms gige-g4-18.core1.fmt1.he.net [2001:470:0:2d::1] 10 206 ms 210 ms 207 ms ipv6.he.net [2001:470:0:64::2] Trace complete. and another from a cliet computer Tracing route to whatismyipv6.com [2001:4870:a24f:2::90] over a maximum of 30 hops: 1 7 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 69 ms 70 ms 63 ms AndrejaKo-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 57 ms 65 ms 58 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 73 ms 74 ms 75 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 71 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 141 ms 149 ms 148 ms 10gigabitethernet2-3.core1.nyc4.he.net [2001:470:0:3e::1] 7 141 ms 147 ms 143 ms 10gigabitethernet1-2.core1.nyc1.he.net [2001:470:0:37::2] 8 144 ms 145 ms 142 ms 2001:504:1::a500:4323:1 9 226 ms 225 ms 218 ms 2001:4870:a240::2 10 220 ms 224 ms 219 ms 2001:4870:a240::2 11 219 ms 218 ms 220 ms 2001:4870:a24f::2 12 221 ms 222 ms 220 ms www.whatismyipv6.com [2001:4870:a24f:2::90] Trace complete. Here's some firewall info on the router: root@OpenWrt:/# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 syn_flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 input_rule all -- 0.0.0.0/0 0.0.0.0/0 input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination zone_wan_MSSFIX all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED forwarding_rule all -- 0.0.0.0/0 0.0.0.0/0 forward all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 output_rule all -- 0.0.0.0/0 0.0.0.0/0 output all -- 0.0.0.0/0 0.0.0.0/0 Chain forward (1 references) target prot opt source destination zone_lan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_lan (1 references) target prot opt source destination Chain forwarding_rule (1 references) target prot opt source destination nat_reflection_fwd all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_wan (1 references) target prot opt source destination Chain input (1 references) target prot opt source destination zone_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 Chain input_lan (1 references) target prot opt source destination Chain input_rule (1 references) target prot opt source destination Chain input_wan (1 references) target prot opt source destination Chain nat_reflection_fwd (1 references) target prot opt source destination ACCEPT tcp -- 192.168.1.0/24 192.168.1.2 tcp dpt:80 Chain output (1 references) target prot opt source destination zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain output_rule (1 references) target prot opt source destination Chain reject (7 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain syn_flood (1 references) target prot opt source destination RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 25/sec burst 50 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan (1 references) target prot opt source destination input_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_MSSFIX (0 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_lan_REJECT (1 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_forward (1 references) target prot opt source destination zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 forwarding_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan (2 references) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT 41 -- 0.0.0.0/0 0.0.0.0/0 input_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_MSSFIX (1 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_wan_REJECT (2 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_forward (2 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 192.168.1.2 forwarding_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Here's some routing info: root@OpenWrt:/# ip -f inet6 route 2001:470:1f0a:de5::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 2001:470:1f0b:de5::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.2 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 default dev 6in4-henet metric 1024 mtu 1280 advmss 1220 hoplimit 0 I have computers running windows 7 SP1 and openSUSE 11.3 and all of them have same problem. I also made a thread about this on HE's forum, but it seems that people there are out of ideas what to do.

    Read the article

  • Prevent udev / uevents looking up DVD at boot time

    - by Sampo
    Problem: Boot time delay caused by udev. Early after initscripts starts there is message saying waiting for uevents to be processed and causing delay on boot, it seems that udev is looking if there is disc in dvd tray. After udev has found disc, boot process continues normally. Main question: How to prevent udev dvd lookup at boot time? Maybe there is some way to skip some udev related stuff and let boot process continue and then later instruct udev to do stuff that may cause some delay (delay in uevents, but not in main boot process, is acceptable after udev is initially loaded).

    Read the article

  • Basic clarification about Limited FTP/sFTP users

    - by mattewre
    I would like to get some clarification about the correct way to create limited users to access to my VPS user as WEBSERVER with Nginix. I'm used to NOT install FTP and access via SFTP only. It is ok for every set up? this is what I usually do from to create a limited user called "admin" that should be able to have access via SFTP to the folder with the website data mkdir -p /var/www/mysite.com/ adduser admin adduser admin www-data chown -R root:root /var/www chmod -R 755 /var/www chmod -R 755 /var/www/mysite.com chown -R admin:www-data /var/www/mysite.com/ It seems not to be the correct way, I always have problems with permission when I upload some files (for example with Wordpress in general). I would like to create an user that does work exactly as the one that the "provides" give to their client when they buy an Hosting service (that is a FTP, I would prefer SFTP access). It is for personal user, but I think that a limited user is a lot safer to use then the "root" via SFTP.

    Read the article

  • Apache only transferring partial content from a Samba share

    - by thaBadDawg
    I have an Apache server running on CentOS 5.3. It currently hosts 12 sites with no known issues. (I say this to point out that up to this point my Apache installation has performed flawlessly) I'm adding a new site where the DocumentRoot of the new VirtualHost is a Samba share. When at the command line of the server I can cp video.m4v ~ and the whole file is copied properly to my home directory. But when I try to access the file from IE/Firefox/Safari/Chrome it only passes back a partial result of 33k. The same thing is happening with my image and audio files. If I make the files local to the server by copying them from the share and then serving them up then the files transfer. Any ideas?

    Read the article

  • Hi , is there any wiki that supports ACL , ADI and API ? [closed]

    - by goutham
    Possible Duplicate: Which wiki satisfies ACL ADI and API ? Hi , is there any wiki that supports ACL , ADI and API ? and my requirement is we need a wiki that does three things 1. Uses ACL (Access Control lists - who can access what pages) 2. Needs AD (active directory integration) 3. Is scriptable via an API (meaning I can create a wiki page through an API in a program instead of logging in and manually typing in the page.) Ur help is appreciated Thanks in Advance Goutham

    Read the article

  • Why would one of my servers stop being able to access other servers by FQDN?

    - by Newlyn Erratt
    I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

    Read the article

  • Using NOPASSWD for specific commands in sudoers file, PASSWD for all others

    - by jberryman
    I would like to configure sudo such that users can run some specific commands without entering a password (for convenience) and can run all other commands by entering a password. This is what I have, but this does not work; a password is always required: Defaults env_reset Defaults timestamp_timeout = 1 root ALL=(ALL:ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) NOPASSWD: /usr/sbin/pm-suspend, /usr/bin/apt-get, PASSWD: ALL #includedir /etc/sudoers.d Note that this is a debian system which uses this adding users to the "sudo" group method. Thanks.

    Read the article

  • Secure openVPN using IPTABLES

    - by bob franklin smith harriet
    Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

    Read the article

  • Can I mark a folder as mountpoint-only?

    - by Collin
    I have a folder ~/nas which I usually use sshfs to mount a network drive on. Today, I didn't realize the share hadn't been mounted yet, and copied some data into it. It took me a bit to realize that I'd just copied data into my own local drive rather than the network share. Is there some way to mark in the system that this folder is supposed to be a mount point, and to not let anyone copy data into it? I tried the permissions solution here: How to only allow a program to write to a directory if it is mounted?, but if I don't have write access I also can't mount anything to it.

    Read the article

  • XenServer Converting HVM to Paravirtualised

    - by Karl Kloppenborg
    Recently I have been tasked with the daunting process of converting a setup of HVM enabled VMs (running on Citrix XenServer 5.6.0) into PV (paravirtualised) containers. The constraints of the project was that: The operating system must be functionally identical after the migration. minimal modification to the operating system (with exception of kernel / drive mapping) I also was allowed to change the bootloader(ie, grub) in what ever way I see fit. However, I have attempted this, I will firstly like to show you my steps I took. This at the moment is CentOS5.5 specific: Steps: yum install kernel-xen This installed: 2.6.18-194.32.1.el5xen edited: /boot/grub/menu.lst changed my specs to match: title CentOS (2.6.18-194.32.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-194.32.1.el5xen ro root=/dev/VolGroup00/LogVol00 console=xvc0 initrd /initrd-2.6.18-194.32.1.el5xen.img Then I changed my xenserver parameters to match: xe vm-param-set uuid=[vm uuid] PV-bootloader-args="--kernel /vmlinuz-2.6.18-194.32.1.el5xen --ramdisk /initrd-2.6.18-194.32.1.el5xen.img" xe vm-param-set uuid=[vm uuid] HVM-boot-policy="" xe vm-param-set uuid=[vm uuid] PV-bootloader=pygrub xe vbd-param-set uuid==[Virtual Block Device/VBD uuid] bootable=true Some things to note, I am running a VolGroup LVM ;) Anyways, after all these steps (which aren't much!) I boot the VM and it boots initial kernel just fine, however I am presented with this error: Boot Screen: device-mapper: dm-raid45: initialized v0.2594l Waiting for driver initialization. Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup00" not found Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Now my hints are that it cannot detect / because of the fact that when you change from HVM mode to PV it does something (not that obvious) When you make a SR (storage) on a HVM, you get it mounted to the guest os as /dev/hda. However in PV mode, this presents itself as /dev/xvda... Could this be the answer? and if so, how the heck to I implement it?? Update: So I have gotten a bit further in my quest, as it now detects the LVM's... To do this, I required to recompile the xen-kernel initrd image. Command: mkinitrd -v --builtin=xen_vbd --preload=xenblk initrd-2.6.18-194.32.1.el5xen.img 2.6.18-194.32.1.el5xen Now when I boot I get this: Boot Screen: Loading dm-raid45.ko module device-mapper: dm-raid45: initialized v0.2594l Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 3 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. mount: error mounting /dev/root on /sysroot as ext3: Device or resource busy Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init!

    Read the article

  • How can I limit the upload/download bandwidth on my CentOS server?

    - by Dan Nestor
    How can I limit the upload and download bandwidth on my CentOS server? This is a box with a single interface, eth0. Ideally, I would like a command-line solution (I've been trying to use tc), something that I could easily switch on and off in a script. So far I've been trying to do something like tc filter add dev eth0 protocol ip prio 50 u32 police rate 100kbit burst 10240 drop but I'm obviously missing a lot of knowledge and information. Can somebody help with a quick one-liner? Many thanks, Dan

    Read the article

  • Is there a way to do something like LVM over NFS?

    - by warren
    I realize that since NFS is not block-level, LVM can't be used directly. However: is there a way to combine multiple NFS exports (from, say, 3 servers) into one mount point on a different server? Specifically, I'd like to be able to do this on RHEL 4 (or 5, and re-export the combined mount to my RHEL 4 server). expansion The reason I pegged lvm is that I want a bunch of exported mounts (servera:/mnt/export, serverb:/mnt/export, serverc:/mnt/export, etc) to all mount at /mnt/space so that my /mnt/space on this server (serverx) as one large filesystem. Yes, I know that re-exporting is generally a Bad Thing™ but thought it might work, if there was a way to accomplish this on a newer release as opposed to an older one From reading the unionfs docs, it appears that I can't use it over a remote connection - have I misread it? More accurately, since Union FS merges the contents of multiple branches, but makes them appear as one, it doesn't seem to go in reverse: I'm trying to mount a bunch of NFS points in a merged fashion, then write to them - not caring where data goes, a la LVM .

    Read the article

  • Is iptable capable of this or should I go with mod_proxy?

    - by Jesper
    I'm trying to configure my network to receive an incoming connection on one device and then redirect it to another device on a specific port. Right now I'm on about port 80 and a device running apache. The problem I'm facing is that when the forwarding is done it also sets the source ip to the first device instead of the source ip the user that connects to the service has. Let me illustrate it: [Internet User] = 7.7.7.7 connects to [Device 1] = 1.1.1.1:80 [Device 1] forwards it to [Device 2] = 1.1.1.2:80 [Device 2] outputs response that [Internet User] sees So on [Device 2] I will naturally see [Device 1]s IP in the logs, but I wanna see if there is a way to connect the internet user through [Device 1] to [Device 2] while seeing the real source IP in the logs on [Device 2]. Is that possible? My rule-set looks like this at the moment: (on Device 1) iptables -P FORWARD ACCEPT iptables -t nat -I PREROUTING -j DNAT -p tcp --dport 80 --to-destination 1.1.1.2:80 iptables -t nat -I POSTROUTING -j SNAT -p tcp -d 1.1.1.2 --to-source 1.1.1.1 On [Device 2] it accepts all incoming on port 80 from [Device 1] as well as accepts all related and established connections. So, would there be any way to get the real source onto [Device 2]? Let me know if you need more information!

    Read the article

  • what is ranlib?

    - by Ying
    I have been using a MacOSX system for a while, but just only recently started poking into the guts. I found a guide telling me to run 'sudo ranlib /usr/local/lib/libjpeg.a'(installing libjpeg). I have read the ranlib manual, and tried looking online on it. I simply don't understand. What resources do I need to look up to learn more, or can someone give a concise explanation on its use? Thanks in advance!

    Read the article

  • Cannot install CentOS 6.5 using UEFI usb boot

    - by Vaindil
    I am trying to dual-boot CentOS 6.5 on my desktop that is currently running Windows 8.1. I have two storage devices: an SSD that has my Windows installation, and an HDD that has all of my data. Both are formatted using GPT, and Windows boots using UEFI. I used the CentOS 6.5 live DVD (CentOS-6.5-x86_64-LiveDVD.iso) to create an EFI-bootable flash drive (it does boot properly in EFI mode). I receive an error, however, when CentOS is booting (error is below). I have a 6.4 boot DVD which boots as expected, but it does not boot in UEFI mode and therefore doesn't play nicely with my Windows installation (I have no way to access it, even using rEFInd or any other similar tools). What do I need to do to get the device to boot properly in UEFI mode? Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-431.el6.x86_64 #1 Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff81077622>] ? do_exit+0x862/0x870 [<ffffffff8118a865>] ? fput+0x25/0x30 [<ffffffff81077688>] ? do_group_exit+0x58/0xd0 [<ffffffff81077717>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b drm_kms_helper: panic occurred, switching back to text console

    Read the article

  • Second DocumentRoot for certain URLS

    - by scrr
    Hello, I have the following setup in my apache-config: <VirtualHost 1.2.3.4:80> ServerName example.com:80 ServerAlias www.example.com DocumentRoot /var/www/page <Location "/blog"> DocumentRoot /var/www/blog </Location> RailsBaseURI / RailsEnv development </VirtualHost> However, Apache tells me, I am not allowed to have a second DocumentRoot. How can I make "www.example.com/blog" point to "/var/www/blog"? I'm sure this is basic, but I just can't find the proper documentation online.

    Read the article

  • Grant HTTP access based on unix user group

    - by Sander Marechal
    Is it possible to grant network access or HTTP access based on a user's group? At my company we want to set up an internal composer server using Satis to manage packages for the projects we write (e.g. on repository.mycompany.com), with the packages themselves in our SVN server (svn.mycompany.com). We have several webservers with many different users on them. Some users should be able to reach the composer and SVN server. Some should not. Users that should be able to reach these servers all belong to the same group. How can I set up Apache on the Composer and SVN server to only grant access to those users in that group? Alternatively, can I set up the webservers in such a way that only users from that group are able to make a connection to our Composer and SVN servers? The best thing we have come up with so far is using SSL client certificates. We simply place a client certificate on all servers which can be used to access Composer and SVN. Only the right usergroup will have read access to the certificate. A bit clunky but it may work. But I'm looking for something better.

    Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >