Search Results

Search found 12775 results on 511 pages for 'remote validation'.

Page 362/511 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• Connect ADSL modem SMC7904WBRA-N to CISCO RV082

  - by Cy.

  I have a SMC7904WBRA-N ADSL modem/router that connects to the internet with a static IP given by the provider. I've received a RV082 to create a VPN connection which is having problems to connect to the remote VPN Server. After many tries we deduced that the SMC7904WBRA-N is being problematic with the NAT and I have been suggested to put the SMC router into the appropriate DSL bridging mode so the RV082 gets direct access to internet with the static IP. Can you give me any hints on how could this be done? Which mode is that?

  Read the article

• How realistic/easy is it to host our own web servers?

  - by morpheous

  It is increasingly looking like we will need to host our own servers, because we need modems physically attached to the server machines. I (think) we will need a T1 line to our office for starters. Dont know what else is involved other than the obvious redundancy and failover requirements. My questions are: Do we really have to do it our selves or can we find a service that allows the modems to be remote as well? If we have to host the servers ourselves, what are the steps (technical and operational) required?

  Read the article

• Timeouts when connecting to SQL Server since installing SP1 for Windows 7

  - by Julien

  Hi, I just installed SP1 for windows 7 and I have severe performance degradation when connecting to SQL Server 2005 since then. Establishing connection takes more than 30 seconds while it's instantaneous on another computer. Firewall is disabled and I didn't make any change to the configuration. It happens both when trying to connect with a hostname and with an ip address. Everything else seems to be fine (for instance, I'm have no issue connecting to other computers with remote desktop) What can cause such a problem? Thanks in advance! Edit : uninstalling the SP1 solves the issue instantly.

  Read the article

• Setup IIS 7 as FTP Server that is connectable outside of my local network

  - by Usta

  I was able to setup an FTP site that I was able to access via ftp://127.0.0.1/ or my local(static) ip. To do this I followed these instructions (with the exception that I did not bind to 127.0.0.1 as suggested) http://learn.iis.net/page.aspx/301/creating-a-new-ftp-site-in-iis-7/ I have created a firewall exception for port 20 and 21, and setup port-forwarding on my wireless router. But I can only access the site via local-host, and I need to have a friend have read access to it. So how do I enable remote access to it? (I'd rather not purchase a domain-name) My setup: IIS 7.5 Windows 7 Professional Wireless Network Norton Internet Security 2012 An Internal Static IP Address

  Read the article

• Distributed Nagios Installation

  - by kruczkowski

  I'm looking for a plug-in or product that will act as a remote probe and perform tests then send back the results to the central Nagios server. Reason for this is that I'd like to monitor internal systems and servers at customers, but don't want to allow all the traffic passing the firewalls. Ideally I'd like a soft-probe that would be installed and then perform the tests and send back the results (via SSH) to the central Nagios installation. Does anyone know of a product or plug-in that would offer such service? If not Nagios, is there any other monitoring system that does such a thing (ideally open-source)?

  Read the article

• Git clone on an ovh host server

  - by newben

  I want to do a git-clone from an ssh connection, on an ovh host-server, but it does not work: Here's the command I entered: git clone ssh :/ / [email protected] / www / (and all variations /. Git / www / .git, / www / .git / ... ) This is the message that I invariably get: fatal: '/ www': unable to chdir or not a git archive fatal: The remote end hung up unexpectedly Moreover, the command git clone "ssh :/ / [email protected] / ~ / forumdesthinktanks.git" responded with: Permission denied, please try again. [email protected] 's password: While the ftp password is correct. Finally, the commands git clone ssh :/ / [email protected] /. Git and git clone ssh :/ / [email protected] / ~ / forumdesthinktanks.git do not work (until the terminal's time out). I'm using a terminal from my Mac.

  Read the article

• Why would http & https be blocked, even in safe mode with firewall disabled?

  - by Cogwheel

  I have a windows 7 machine (dell studio xps). Everything on it seems to be in working order. The network device says it has internet connectivity, and indeed I can ping websites, transfer files via ftp, connect to vpns and remote desktop, but the web won't work. I've disabled the windows firewall and still no go. There are no other firewalls installed. The computer came with a trial of norton 360 so I also used the norton removal tool (which solved a similar problem on another computer for me previously). Any thoughts?

  Read the article

• Setup a proxy (Not reverse proxy) using Varnish/Squid.

  - by shabda

  I need to setup a proxy server where we can request remote urls and get them served locally. Basically what I need is mysever:8000/varnish/serverfault.com get me serverfault.com served from my local varnish or myserver:8080/squid/serverfault.com get me serverfault.com served from my local squid. (Both should cache the site for 24 hours) I am evaluating if Varnish or Squid will be a good choice for it. Which one will be a better fit? How do I do it. Links to tutorials would be good.

  Read the article

• Active Directory replication failing with Access is Denied

  - by Justin Love

  I recently discovered that Active Directory replication started failing about a month ago. If I attempt to Replicate Now from the failing domain controller, I receive The following error occurred during the attempt to synchronize the domain controllers: Access is denied. It is between two servers at a remote site. One is Windows 2003 and the other is Windows 2000; the Windows 2000 machines is experiencing the errors. The domain is older OUR_DOMAIN style. Attempts so far: I disabled Kerberos service on the Windows 2000 server and restarted RPC and RPC locater services have expected settings HKEY_Local_Machine\Software\Microsoft\Rpc\ClientProtocols missing ncacn_nb_tcp on Windows 20003 server (added) Portqry reports okay Firewall disabled netdom resetpwd (and reboot) on Windows 2000 server.

  Read the article

• getting a 404/403 error for payment gateway

  - by Obay Ouano

  We are setting up an online payment facility using a payment gateway. After the payment gateway finishes processing the credit card details for a payment, the user is redirected to a "403 Forbidden" page. The logs show: [MY_IP_ADDRESS_HERE] - - [SOME_DATE_HERE] "GET /POSTBACK_URL.php?txnid=1338434567&result=failure&reason=The+remote+server+returned+an+error%3a+(404)+Not+Found.&digest=7a115270c56df5945c43ad86e56b2e930a3cfd50 HTTP/1.1" 404 - "PAYMENT_GATEWAY_URL_HERE" "BROWSER_DETAILS_HERE" It means that when the PAYMENT_GATEWAY_URL attempts to open our POSTBACK_URL, it gets a 404 error, is that correct? But why does the page say "403 Forbidden"? Anyway, we tried to copy-paste that same URL into the browser window, and the page is opened successfully, with our programmed error notification message. So, why couldn't it be opened when the payment gateway tried to redirect to it, but we could? Is this some sort of permissions issue? If so, the postback URL's file permissions are already 755. What am I missing?

  Read the article

• Qnap won't connect to Windows Share

  - by thetrashcan

  I have a qnap nmp-1000 in my network and would like to stream my films from my win7 laptop to the nmap-1000 device. I just managed to do so with upnp sharing, but I would like to, for security reasons, share my files over a shared folder which is password protected. My problem is when I'm searching for devices on my network with the qnap then it won't find any. When I try to mount a remote disk on my qnap it will just fail with an connection failed message. But when I try to connect to the qnap device with my laptop, it does this succesfully. Can someone guide me through on how to get my setup working?

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

• mirroring linux server to external usb harddrive

  - by DuPie

  My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

  Read the article

• if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

  - by EndangeringSpecies

  suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

  Read the article

• Trouble configuring sendmail to relay mail

  - by Warren Schubert

  I am trying to configure sendmail and ufw on an ubuntu server (ServerA) so that another server (ServerB) can send mail through it. In my /etc/mail/access file I have the following line (a.b.c.d is the IP of ServerB): Connect:a.b.c.d RELAY My ufw status shows the following rule I added: 25/tcp ALLOW a.b.c.d When I telnet from ServerA I get through: telnet localhost 25 When I telnet from ServerB I don't (w.x.y.z is the IP of ServerA): telnet w.x.y.z 25 telnet: Unable to connect to remote host: Connection refused I did restart the sendmail daemon after editing the access file. What could I be missing? Something in sendmail.mc? Edit: netstat -an|grep -w 25 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN

  Read the article

• Has anyone experienced "Screen Painting" issues with RealVNC?

  - by cybersylum

  I've just setup remote access to a Windows XP box using RealVNC. When the user runs an app, they expierence issues with "screen painting" - the screen doesn't paint well, except for a radius around the mouse cursor. The app is displaying a calendar. I am not sure what it is written in (think it is a .NET app) Have no problems getting/staying connected. Initially it seemed to be working fine. I have looked through all of the settings as far as compression and speed. I can replicate the issue from more than 1 location. The hosting Internet connection is DSL.

  Read the article

• webmail suite recommendation

  - by hoball

  Hello, I have serveral emails in a few domains (email@domain1, email@domain2, email@domain3). Currently they are on an owned email server and I am collecting emails via IMAP protocol (i would not like to use POP..) in Thunderbird. I have a few partners and I want to allow them to access the same email address. Here is what I desired: All users can open All the inboxes via IMAP @ Thunderbird (with proper configuration) at the same time, there are a webmail system, every user can login their account (userA, userB, userC), and they will see all inboxes (email@domain1, email@domain2, email@domain3) Would you recommend any suite that fits my needs? Either (a system to be installed on my server) or (a remote service where I need to config MX records) will do. Thank you.

  Read the article

• vsFTPd and iptables - how to configure them in CentOS 5.5?

  - by Vincenzo

  I've installed vsFTPd in CentOS 5.5, on TWO servers, and added this rule to their iptable-s: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT Looks like this is not enough, since when I'm trying to upload a file from one server to another, I'm getting this result (IP address is masked): # ftp 99.99.99.99 Connected to …com (99.99.99.99). 220 (vsFTPd 2.0.5) Name (99.99.99.99:root): vinny 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 227 Entering Passive Mode (99,99,99,99,107,74) ftp: connect: No route to host I've found a few articles in the net about the second rule I have to add to iptables, but I didn't find the right syntax for it. Could you please help?

  Read the article

• Sendmail problem

  - by trobrock

  I am trying to get my server to be able to send email from PHP. Currently it is using send mail, but whenever I try to send mail to a gmail address I get this sort of response: --o54Mqd5s008981.1275691959/ServerName Content-Type: message/delivery-status Reporting-MTA: dns; ServerName Received-From-MTA: DNS; localhost Arrival-Date: Fri, 4 Jun 2010 22:52:38 GMT Final-Recipient: RFC822; [email protected] Action: failed Status: 5.7.1 Remote-MTA: DNS; gmail-smtp-in.l.google.com Diagnostic-Code: SMTP; 550-5.7.1 [xxx.xxx.xxx.xxx] The IP you're using to send mail is not authorized Last-Attempt-Date: Fri, 4 Jun 2010 22:52:39 GMT How can I set this up to relay through a google account that I own? Is sendmail the best thing to use, or should I switch to Postfix or something? This is on an Ubuntu Server 9.10

  Read the article

• Ping, firewall or DNS issue on Win Server 2008 R2

  - by Fred Kaiser

  I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it.

  Read the article

• What is causing a vm to exhibit packet loss?

  - by Joe Philllips

  We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

  Read the article

• FM Transmitter for the Home

  - by greggannicott

  After asking this question regarding piping music through my home I'm looking to buy an FM transmitter. I'd like to connect it to my home pc (ie. into the speaker port), and I'd then control the output with my iPhone (ie. using Apple's Remote software). The problem is, given that almost every FM transmitter is advertised to be used in the car (ie. an iTrip) it's proving very tricky knowing which one would be ideal for the home. First, has anyone tried this? Did it work ok or was there simply to much interference for it work. Secondly, if it did work ok, can anyone recommend a reasonable transmitter? For what I need it seems like an ideal solution, so given that I'm struggling to find information regarding it I'm starting to believe it's not as ideal as it first seems. Thanks in advanance.

  Read the article

• Postfix, saslauthd, mysql, smtp authentication problems

  - by italiansoda

  Trying to get authentication on my mail server (ubuntu 10.04) running but am having trouble. I have a server with postfix for smtp setup, imap server with courier setup. My postfix authentication is using cyrus (I haven't tried dovecot really) saslauth. The user name and password is stored in a MySql database. Logging in with imap-ssl works on a remote client (thunderbird), and I can read my mail. I can't get the SMTP side working, and have focused the issue down to saslauth. Testing with testsaslauthd -u 'username' -p 'passowrd' -s smtp returns connect() : Permission denied the password in the database is encrypted and I guess this testsaslauthd will take a plain text password and encrypt it. Looking for someone to walk me through getting this working. Im new to the mail server, and have never got one fully working. Thanks. Ask me which log files I should look at/post, which tests to run, permissions to check.

  Read the article

• SQL Management Studio is painfully slow on 32-bit Windows 7

  - by Sergei

  I've been having issues running anything in SQL Management Studio on Win 7. Basically, doing anything through the Management Studio interfaces completely freezes it up for a few minutes. Running a query is nearly impossible because it takes nearly 2 minutes just for the IDE to parse it and another minute to run it when the query itself completes instantaneously outside of the IDE. I'm not even going to go into the query designer. Anything with heavy user interaction such as editing a row in the result set where i have to click a cell freezes up the front-end. I tried reinstalling to no avail. Also tried running in compatibility mode without any difference whatsoever. Anybody had a similar experience? I'm running SQL Management Studio 2008 version 10.0.2531.0 on 32-bit Windows 7. Connecting to a remote SQL Server instance (2008 R2). Thanks.

  Read the article

• Windows Server 2008 r2 Hardening [on hold]

  - by Natasha

  I have created windows server 2008 r2, running on VM, Where Running services in Server Manager 1) File services ( in Role) 2) Telnet Client ( Features) Windows Firewall Disabled and we are using TOMCAT APACHE WEB SERVER, here i want to harden the windows server, While running SCW by simply clicking with default NEXT, at last when i have clicked SAVE and RUN now in SCW, immediately my remote desktop services disabled. May I Know the things i want to add in Roles,features and finally want to harden windows ? and also what about audit policy and network settings in that ? Please help me out, Don't Ignore.

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >