Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 364/534 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• External Hardrive Not Reconized on Windows 7 at all

  - by Bella

  I Have a NextStar 2/5" from Vantec and its an 80G HD. I have used it many times on windows xp and it works fine. We just recently upgraded to windows 7 home premium and when I plug it in it beeps many times. I've tried all the USB plugs in my computer and its not those plugs. Haven't tried eSata because it uses a weird cable to plug into. People told me that when it beeps everything is corrupted, but works fine on xp. I tried installing the drivers online from their website and when I try it asks me to put in a cd which makes no sense because they are online drivers. When I go into device manager nothing comes up, it just acts like the HD is invisible. The beeping will stop eventually as it is plugged in, but with no result.

  Read the article

• Where does power consumption go in a computer?

  - by Johannes Rössel

  Today we had a weird discussion over lunch: What exactly causes power consumption in a computer, particularly in the CPU? Figures you usually see indicate that only a percentage (albeit a large one) of the power consumption ends up in heat. However, what exactly does happen with the rest? A CPU isn't (anymore) a device that mechanically moves parts, emits light or uses other ways of transforming energy. Conservation of energy dictates that all energy going in has to go out somewhere and for something like a CPU I seriously can't imagine that output being anything but heat. Us being computer science instead of electrical engineering students certainly didn't help in accurately answering the question.

  Read the article

• Wireless driver not detected by Windows 8

  - by rksh

  I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• Ubuntu 9.0.4 Presario S4000NX Fan Speed

  - by Chris C

  I recently install Ubuntu 9.0.4 on a Presario S4000NX and the CPU fan speed is kept at max. With Windows XP installed the fan speed would increase/decrease as required. I've tried to install lm-sensors and run the sensors-detect. It recommended that I load the modules which I did: smsc47m192 i2c-i801 When running sensor-detect it gave me this strange message: Trying family SMSC Found SMSC LPC47M15x/192/997 Super IO Fan Sensors (but not activated) Running the sensors command gives me a list of voltages and CPU and temperature but doesn't list any fans. After doing some Internet research I then tried to load the smsc47m1 module but I get the following error: FATAL: Error inserting smsc47m1 (/lib/modules/2.6.28-15-generic/kernel/drivers/hwmon/smsc47m1.ko): no such device The file smsc47m1.ko does exist in the listed folder. Any suggestions for getting the fan speed (and the noise) down in Ubuntu? Thanx. - Chris P.S. - I would have put better tags but Server Fault wouldn't let me.

  Read the article

• Windows 7 USB power lose after a few seconds / minutes

  - by Stefan Dunn

  My friend's computer has a problem where the USB ports causes problems with the power of some devices connected to the computer. The USB mouse has no problems, however the Wireless Adapter looses power after around 20 seconds of use and USB Flash Drives cause the computer to either freeze, lose power (and become unresponsive) or become disconnected (still shown in Device Manager, but not in My Computer) when trying to transfer any type of file to / from the computer. I have a suspicion it's the Motherboard but could it also be a Software problem? Tried a new case, RAM, CPU and GFX Card which had no effect. The problem occurs on both the Front USB and Back (Motherboard) USB Ports. UPDATE: Tried the USB devices with an Ubuntu Live CD and they work fine, could this mean it's a problem with Windows (x64)?

  Read the article

• Hardware asset management systems

  - by Dave

  I need to track a bunch of specialized testing tools, They are hardware devices used for testing other equipement. Each device has a serial number and is sent out for use in testing. Occasionally they break and have to be sent to the manufacture for repair. I'm looking for an open source application (preferably a webapp) to help manage them. Right now we're using Excel and it's not scaling as we get more tools. They aren't computers so all the standard IT asset management systems don't really fit the bill. I found h-harmony, but that project seems dead?

  Read the article

• Virtual fiber channel HBA in Solaris

  - by Phil

  We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't work at all. We tried to pass the NPIV as following: # zonecfg -z zone1 'info' zonename: studentz1 [...] device: match: /devices/pci@0,0/pci8086,25f9@6/pci8086,350c@0,3/pci1077,140@4/fp@1,0:devctl allow-partition not specified allow-raw-io not specified Wat we want to do is, set up an environment for SAN exercises. We don't have a physical host per student, so we try to virtualise that in some way (Solaris zones or VMware). It should be possible to display the WWN of the virtual HBA and mount the storage presented by the disk subsystem. Any ideas to pass the NPIV to a solaris zone or to virtualise this with vmware?

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• How can I apply a DSP to my microphone in windows?

  - by user16315

  I'd like to be able to run my microphone through arbitrary DSP filters--Mostly for compression and amplification, but also noise cancelation would be nice. I'd then like to take that output and put it back in a virtual audio device that I could use as input for skype, mumble, teamspeak, or any other VOIP program. With a program like Virtual Audio cable, I can do the 'fake devices' part but as far as I know it does not allow any kind of filtering inline. Does a program like this exist? Or some combination of programs that can be combined to accomplish this?

  Read the article

• LM Sensors always returning same (invalid) value for one temp sensor

  - by pkaeding

  I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

  Read the article

• SMTP port open - but not open

  - by Frederik Nielsen

  As some of you might know, I am setting up an exchange server. Now I ran into another problem: I cannot connect to the SMTP service from outside the server! The ports are opened in the gateway device (a ZyXEL USG50), Windows firewall is off. I see the packets travekl through the ZyXEL firewall, and I can also see the packets with wireshark on the server, so I know they are getting all the way in to the server. I also know it receives them, and sends out the reply - and this is where things go bad! Analyzing with wireshark, I get these errors in the return packets: Header checksum: 0x0000 [incorrect, should be 0x0779 (may be caused by "IP checksum offload"?)] And: Acknowledgment Number: 0x8e3337d1 [should be 0x00000000 because ACK flag is not set] What the (sorry my French) hell is going on? I really cant figure it out.. Thanks in advance.

  Read the article

• Connect wired-only devices to a remote wireless access point?

  - by billpg

  Hi everyone. In building A, I have a Netgear wireless access point using WPA2. Works great, no problems. In building B, I have some devices that only have wired Ethernet ports. They can't see my access point. What I need is a gizmo that connects over-the-air to my access point in building A, talks WPA2, and converts the packets to and from a wired Ethernet port. Netgear-access-point in building A      (WPA2 WiFi) Wireless bridge device          <-- Looking for this.      (Cat5 ethernet) My devices in building B. I've looked for devices on Amazon, but the descriptions are infuriatingly unclear. It says it supports WPA2, but does it support it as a client? Grrr... Any recommendations please?

  Read the article

• Diagnosing high CPU waiting

  - by Will

  I have a monitoring server that is running icinga/collectd/graphite with about 50 hosts. I have noticed high load/slugging performance on the box. If you take a look at top, you'll see: Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 7.6%id, 23.4%wa, 0.0%hi, 0.2%si, 0.0%st Notice the HUGE %wa value, which as far as I know means a network or disk bottleneck. ifconfig shows no dropping packets and there's not a ton of bandwidth going on, so that leaves disk issues, right? There's not a lot of disk writing going on either...iotop is reporting we're only writing a little over 1 MB per second and the RAID tool reports everything is A-OK and write caching is enabled. How do I go about trying to figure out how to fix this? UPDATE: iostat -x output is: avg-cpu: %user %nice %system %iowait %steal %idle 0.62 0.10 0.31 9.65 0.00 89.31 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.21 33.34 83.55 16.54 1599.94 399.07 19.97 43.21 416.98 3.71 37.13

  Read the article

• How to generate a round-numbers graph in Excel?

  - by tcheregati

  folks! Now, I have an Excel file with measurements I made of some color patches (I work at a Press company), with a device called spectrophotometer. Here it is: https://docs.google.com/open?id=0B0i8fdSf2ihzRlFYNWd4anItenM Density and Hue are two characteristics of each color patch. The thing is: I'm looking at a non-linear increase between the 25 Color Density measurements I took, but I NEED to know exactly how the color's Hue changes as the color's Density increases. For that, I needed Excel to give me round numbers for the X axis (for example 0,70 to 1,50 in 0,05 increments). And for that, obviously, I needed Excel to calculate the probable Hue Values corresponding to those ghost/round/not-given values of Density (like a kind of advanced rule of three). So, can anyone help me on that? Thanks a lot!

  Read the article

• Backing up Initial and Running configurations for Nortel Baystack 325-24G

  - by i.h4d35

  I recently came across a Nortel Baystack 325-24G switch. This is the first time I've come across a Nortel device of any sort, so I am a little intimidated. My problem is that I have been trying to get the startup and running configurations via both the CLI and the Menus but its become quite apparent that it isn't like the Cisco Switches/Routers. I've searched online but have only found Configuration Guides by Avaya. Also I'd like to know - is there a way to take backups regularly (something like tftp)? Pardon me but I'm a n00b when it comes to routers and switches. Thanks in advance.. EDIT: Still havent found a way to get the running config via the CLI

  Read the article

• NTFS-3G is only mounting external drives as read-only

  - by Phanto

  I'm currently running RHEL 5.5, and I installed the ntfs-3g utility from here: http://www.tuxera.com/community/ntfs-3g-download/. I have also followed their instructions for auto-mounting NTFS USB drives here: http://www.tuxera.com/community/ntfs-3g-faq/#plugandplay. The problem I'm experiencing is that ntfs-3g is automatically mounting as root. In order for me to obtain write support, I need to navigate to the mounted device as root, and perform write actions with elevated privileges. Is there a way to mount USB NTFS volumes automatically without needing to sudo every write command? Thanks!

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• Serve up PC hard drive as USB mass storage

  - by sheepsimulator

  Is there a software package available that can serve up a hard-drive internal to a PC and make it available over USB to other USB Master nodes as mass storage? Ex: take your C: or /dev/hda drive on a PC (let's call the computer PC-A), and run a driver program which makes your C: or /dev/hda drive available to external devices as USB mass storage. When you'd hook up another PC (PC-B) to PC-A via USB, it would detect a USB mass storage device, which is C: or /dev/hda on PC-A. Is this even possible? EDIT: I know that there are other ways of making data on a drive available between two different computers (eg. putting PC-A's hdd in a USB-drive-enclosure, or having PC-A make the hdd available via a network share). But I'd like to know if the method that I describe above is even technically possible.

  Read the article

• How to convert PowerPoint presentations into a Kindle/E-reader friendly form?

  - by Shiki

  I have a lot of documents in .ppt and .pptx (blame the co-workers). I would like to read them on way home or elsewhere... when I have a little time to catch up with things. One thing I could do with the documents is cutting them together into one file. But saving that one even if a smaller version of PDF (according to Office 2010) results in a huge file. And PDF is hardly readable on a Kindle. I would need something .epub free, easy-on-the-device way. Is there such a thing? (Manually I could copy all the images down into native text and whatnot and create new presentations, save those, convert them. But that would just take a lot of time.)

  Read the article

• How to rescan and remount drives on Ubuntu Hardy or Jaunty?

  - by pts

  When I connect an USB drive to an Ununtu Hardy and Jaunty system, the system mounts the partitions found on the drive, and opens a Nautilus window for each mounted partitions. Within Nautilus, I am able to unmount partitions. What I need is a command or action which forces the system to rescan the available drives and partitions, and automount each not mounted partition, including those which I've manually unmounted from Nautilus. sudo /etc/init.d/udev restart or ... reload doesn't do this. As of now, I just unplug the USB drive, and commect it again, which will force a scan and a mount on that drive. But I want to do force the rescan and remount without unplugging anything, preferably without the user having the know device or drive names.

  Read the article

• Call issue with Freeswitch

  - by gbraad

  I am testing the following with Freeswitch and different devices (nokia n900, nokia e60, ekiga) and have similar results between them. On the Freeswitch server (1.0.4 in multi-tenant mode) I have several user profiles for a domain, e.g. 1000, 1001 for host.com The user are authenticated correctly and calls can be placede. When I place a call from a device registered as [email protected] to [email protected] it will show up at the other end (1002) as [email protected] I would expect this call to show up as [email protected]. The IP address is the one of from the Freeswitch server. Because of this, the calls are no correctly recognized by the address book on certain devices. Can the he domain FQDN of the callers domain/acount be used, instead of the IP address of the server in the SIP uri?

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• Xerox Workcentre 3119 and Linux

  - by Milan Babuškov

  I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

  Read the article

• How to install Windows 8 from Ubuntu without a USB or DVD?

  - by 0xEDD1E

  Last week my windows 7 operating system crashed. So I installed Ubuntu 10.04 on the partition Windows 7 was previously on. I have two Partitions, C: and D:. In partition D: I have very important data and I can't format it (I can't backup because it's very heavy ~50 GB). Now I want to install Windows 8. I have downloaded the ISO file of Windows 8 Pro. I don't have a DVD writer or a USB device to Install this. I need to install this on C: partition (the partition on which I have already installed Ubuntu) and I need to protect the data in partition D:. How do I do this?

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >