Search Results

Search found 15081 results on 604 pages for 'passing by reference'.

Page 364/604 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• deserializing multiple types from a stream

  - by clanier9

  I have a card game program, and so far, the chat works great back and forth over the TCPClient streams between host and client. I want to make it do this with serializing and deserializing so that I can also pass cards between host and client. I tried to create a separate TCPClient stream for the passing of cards but it didn't work and figured it may be easier to keep one TCPClient stream that gets the text messages as well as cards. So I created a class, called cereal, which has the properties for the cards that will help me rebuild the card from an embedded database of cards on the other end. Is there a way to make my program figure out whether a card has been put in the stream or if it's just text in the stream so I can properly deserialize it to a string or to a cereal? Or should I add a string property to my cereal class and when that property is filled in after deserializing to the cereal, i'll know it's just text (if that field is empty after deserializing i'll know it's a card)? I'm thinking a try catch, where it tries to deserialize to a string, and if it fails it will catch and cast as a cereal. Or am I just way off base with this and should choose another route? I'm using visual studio 2011, am using a binaryformatter, and am new to serializing/deserializing.

  Read the article

• Timeout Exceptions

  - by Raihan Jamal

  This is my below code, I am confuse why this thing is happening. In this code getLocationByIpTimeout is a method in which I am passing two things- one is the ip address and second is the timeout. So I will get the timeout exception if the response is not getting back in under 5 ms. So when I ran this below code, I am getting few timeout exceptions but the most important thing that I am confuse is if I am getting timeout exceptions (time taken to get the response is greater than 5 ms) then why the program is entering in that if loop in which I am having difference 5. What can be the possible reason for this? It is because of catch block?? Any suggestions will be appreciated. long runs =10000; long difference = 0; while(runs > 0) { String ipAddress = generateIPAddress(); long start_time = System.nanoTime(); try { resp = PersonalizationGeoLocationServiceClientHelper.getLocationByIpTimeout(ipAddress, 5); } catch (TimeoutException e) { System.out.println("Timeout Exception"); } long end_time = System.nanoTime(); if(resp == null || (resp.getLocation() == null)) { difference = 0; } else if(resp.getLocation() != null) { difference = (end_time - start_time)/1000000; } if(difference> 5) { System.out.println("Debug"); } }

  Read the article

• jQuery UI Autocomplete and CodeIgniter

  - by Kere Puki

  I am trying to implement a simple autocomplete script using jQuery UI and CodeIgniter 2 but my model keeps telling me there is an undefined variable so I dont know if my setup is right. My view $(function() { $("#txtUserSuburb").autocomplete({ source: function(request, response){ $.ajax({ url: "autocomplete/suggestions", data: { term: $("#txtUserSuburb").val() }, dataType: "json", type: "POST", success: function(data){ response(data); } }); }, minLength: 2 }); }); My controller function suggestions(){ $this->load->model('autocomplete_model'); $term = $this->input->post('term', TRUE); $rows = $this->autocomplete_model->getAutocomplete($term); echo json_encode($rows); } My Model function getAutocomplete() { $this->db->like('postcode', $term, 'after'); $query = $this->db->get('tbl_postcode'); $keywords = array(); foreach($query->result() as $row){ array_push($keywords, $row->postcode); } return $keywords; } There arent any errors except it doesn't seem to be passing the $term variable to the model.

  Read the article

• How to achieve interaction between GUI class with logic class

  - by volting

  Im new to GUI programming, and haven't done much OOP. Im working on a basic calculator app to help me learn GUI design and to brush up on OOP. I understand that anything GUI related should be kept seperate from the logic, but Im unsure how to implement interaction between logic an GUI classes when needed i.e. basically passing variables back and forth... Im using TKinter and when I pass a tkinter variable to my logic it only seems to hold the string PY_VAR0. def on_equal_btn_click(self): self.entryVariable.set(self.entryVariable.get() + "=") calculator = Calc(self.entryVariable) self.entryVariable.set(calculator.calculate()) Im sure that im probably doing something fundamentally wrong and probabaly really stupid, I spent a considerable amount of time experimenting (and searching for answers online) but Im getting no where. Any help would be appreciated. Thanks, V The Full Program (well just enough to show the structure..) import Tkinter class Gui(Tkinter.Tk): def __init__(self,parent): Tkinter.Tk.__init__(self,parent) self.parent = parent self.initialize() def initialize(self): self.grid() self.create_widgets() """ grid config """ #self.grid_columnconfigure(0,weight=1,pad=0) self.resizable(False, False) def create_widgets(self): """row 0 of grid""" """Create Text Entry Box""" self.entryVariable = Tkinter.StringVar() self.entry = Tkinter.Entry(self,width=30,textvariable=self.entryVariable) self.entry.grid(column=0,row=0, columnspan = 3 ) self.entry.bind("<Return>", self.on_press_enter) """create equal button""" equal_btn = Tkinter.Button(self,text="=",width=4,command=self.on_equal_btn_click) equal_btn.grid(column=3, row=0) """row 1 of grid""" """create number 1 button""" number1_btn = Tkinter.Button(self,text="1",width=8,command=self.on_number1_btn_click) number1_btn.grid(column=0, row=1) . . . def on_equal_btn_click(self): self.entryVariable.set(self.entryVariable.get() + "=") calculator = Calc(self.entryVariable) self.entryVariable.set(calculator.calculate()) class Calc(): def __init__(self, equation): self.equation = equation def calculate(self): #TODO: parse string and calculate... return self.equation if __name__ == "__main__": app = Gui(None) app.title('Calculator') app.mainloop()

  Read the article

• Cannot pass null to server using jQuery AJAX. Value received at the server is the string "null".

  - by Tom

  I am converting a javascript/php/ajax application to use jQuery to ensure compatibility with browsers other than Firefox. I am having trouble passing true, false, and null values using jQuery's ajax function. Javascript code: $.ajax ( { url : <server_url>, dataType: 'json', type : 'POST', success : receiveAjaxMessage, data: { valueTrue : true, valueFalse : false, valueNull : null } } ); PHP code: var_dump($_POST); Server output: array(3) { ["valueTrue"]=> string(4) "true" ["valueFalse"]=> string(5) "false" ["valueNull"]=> string(4) "null" } The problem is that the null, true, and false values are being converted to strings. The Javascript AJAX code currently in use passes null, true, and false correctly but only works in Firefox. Does anyone know how to solve this problem using jQuery? Here is some working code (not using jQuery) to compare with the code not-working code given above. Javascript Code: ajaxPort.send ( <server_url>, { valueTrue : true, valueFalse : false, valueNull : null } ); PHP code: var_dump(json_decode(file_get_contents('php://input'), true)); Server output: array(3) { ["valueTrue"]=> bool(true) ["valueFalse"]=> bool(false) ["valueNull"]=> NULL } Note that the null, true, and false values are correctly received. Note also that in the second method the $_POST array is not used in the PHP code. I think this is the key to the problem, but I cannot find a way to replicate this behavior using jQuery.

  Read the article

• Core Data object into an NSDictionary with possible nil objects

  - by Chuck

  I have a core data object that has a bunch of optional values. I'm pushing a table view controller and passing it a reference to the object so I can display its contents in a table view. Because I want the table view displayed a specific way, I am storing the values from the core data object into an array of dictionaries then using the array to populate the table view. This works great, and I got editing and saving working properly. (i'm not using a fetched results controller because I don't have anything to sort on) The issue with my current code is that if one of the items in the object is missing, then I end up trying to put nil into the dictionary, which won't work. I'm looking for a clean way to handle this, I could do the following, but I can't help but feeling like there's a better way. *passedEntry is the core data object handed to the view controller when it is pushed, lets say it contains firstName, lastName, and age, all optional. if ([passedEntry firstName] != nil) { [dictionary setObject:[passedEntry firstName] forKey:@"firstName"] } else { [dictionary setObject:@"" forKey:@"firstName"] } And so on. This works, but it feels kludgy, especially if I end up adding more items to the core data object down the road.

  Read the article

• Release edit in QTableWidget Cell

  - by Schomin

  Basically I am trying to give the enter key the same functionality as the return key has when editing a cell in a qtablewidget. If editing a cell and enter is pressed I want it to jump out of editing that cell just like return does. It feels like I've literally tried everything. I've even tried passing a return press event to qcoreapplication. It seems like if your editing a cell and you press a key to trigger an action it wont happen. That seems to be what the problem is and I'm not sure how to get around that. I've been setting up all of my keyboard shortcuts for this program as actions because it seems easier to set up. Is there another way to do this that would allow the key event to happen when editing a cell? Can anyone help out with this? Thank you in advance. Tried this. It didn't work for me. http://stackoverflow.com/questions/518447/how-can-i-tell-a-qtablewidget-to-end-editing-a-cell

  Read the article

• Procedure expects parameter which was not supplied.

  - by Tony Peterson

  I'm getting the error when accessing a Stored Procedure in SQL Server Server Error in '/' Application. Procedure or function 'ColumnSeek' expects parameter '@template', which was not supplied. This is happening when I call a Stored Procedure with a parameter through .net's data connection to sql (System.data.SqlClient), even though I am supplying the parameter. Here is my code. SqlConnection sqlConn = new SqlConnection(connPath); sqlConn.Open(); // METADATA RETRIEVAL string sqlCommString = "QCApp.dbo.ColumnSeek"; SqlCommand metaDataComm = new SqlCommand(sqlCommString, sqlConn); metaDataComm.CommandType = CommandType.StoredProcedure; SqlParameter sp = metaDataComm.Parameters.Add("@template", SqlDbType.VarChar, 50); sp.Value = Template; SqlDataReader metadr = metaDataComm.ExecuteReader(); And my Stored Procedure is: USE [QCApp] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[ColumnSeek] @template varchar(50) AS EXEC('SELECT Column_Name, Data_Type FROM [QCApp].[INFORMATION_SCHEMA].[COLUMNS] WHERE TABLE_NAME = ' + @template); I'm trying to figure out what I'm doing wrong here. Edit: As it turns out, Template was null because I was getting its value from a parameter passed through the URL and I screwed up the url param passing (I was using @ for and instead of &)

  Read the article

• addEventListener pass caller as argument

  - by Ryan

  Hi, I have the following code. And my problem is that when clicking, the event is firing but the argument passed is not the correct one. It is passing the last dynamically created row i.e. dataStructure.length value. Anyone knows a solution how to get around this? var table = document.getElementById('output'); for(i =0; i<dataStructure.length; i++){ var row = document.createElement('tr'); row.setAttribute('id', i); var url = dataStructure[i].url; if(document.addEventListener) row.addEventListener('click', function(){handleRowClick(i);}, false); var obj = dataStructure[i]; var cellCount = 0; for(field in obj){ var cell = document.createElement('td'); cell.setAttribute('id', cellCount++); //cell.addEventListener('click', function(){window.open(dataStructureObj.links[i].url);}, false); cell.innerHTML = obj[field]; row.appendChild(cell); } cellCount = 0; table.appendChild(row); } } function handleRowClick(rowClicked){ var rowHTML = rowClicked.innerHTML; var cells = rowHTML.getElementsByTagName('td'); for(cell in cells) { alert(cell.value); } window.open(cells[1].innerHTML); }

  Read the article

• System Error when running PyQt4's loadUi()

  - by user633804

  Hello, I'm pretty new to Qt, Python and their combinations. I'm currently writing a QGIS plugin in python (I used QtCreator 2.1 (Qt Designer 4.7) to generate a .ui-file and am now trying to use it for a Quantum GIS plugin that's written in Python 2.5 (and running in the Quantum GIS Python 2.5 console)). I am running into trouble when loading the ui-file dynamically when the program runs the loadUi() function. What throws me off is that the error occurs outside my script. Does that mean, I'm passing something wrong into it? Where does the error come in? Any hints on what could be wrong? code_dir = os.path.dirname(os.path.abspath(__file__)) self.ui = loadUi(os.path.join(code_dir, "Ui_myfile.ui"), self) This is the Error Code I am getting (minus the first paragraph): File "C:/Dokumente und Einstellungen/name.name/.qgis/python/plugins\myfile\myfile_gui.py", line 42, in __ init __ self.ui = loadUi(os.path.join(code_dir, "Ui_myfile.ui"), self) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic__init__.py", line 112, in loadUi return DynamicUILoader().loadUi(uifile, baseinstance) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic\Loader\loader.py", line 21, in loadUi return self.parse(filename) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic\uiparser.py", line 768, in parse actor(elem) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic\uiparser.py", line 616, in createUserInterface self.traverseWidgetTree(elem) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic\uiparser.py", line 594, in traverseWidgetTree handler(self, child) File "C:\PROGRA~1\QUANTU~1\apps\Python25\lib\site-packages\PyQt4\uic\uiparser.py", line 233, in createWidget topwidget.setCentralWidget(widget) SystemError: error return without exception set

  Read the article

• How to implement a single instance app manager in java (CVM PhoneME)?

  - by Marcus

  Hi, I'm working on a application manager for embeded platform based on the CVM PhoneME VM. The VM is started by a C++ app which configures the CVM and then triggers the VM itself. This C++ app is called form the command line passing the main class name and the classpath of a java application. There is a main java app (lets call it Manager) which loads the app using classloaders. I want this manager to be a single instance application so it could track all running apps. In other words: The first time I start an app (app1 for instance), the VM will launch and the Manager will load the app1. In further calls to load other apps (app2, app3 and so on), the same instance of the Manager would load those apps. The manager is working fine, except for the fact that this is not a single instance. Is it possible to do what I want? I found this: http://www.knowledgesutra.com/forums/topic/59760-how-to-implement-single-instance-application-on-java/ This is almost the same I want, except for the app loading part. However, the necessary packages are not available in the CVM implementation. Thanks very much.

  Read the article

• Algorithm for generating an array of non-equal costs for a transport problem optimization

  - by Carlos

  I have an optimizer that solves a transportation problem, using a cost matrix of all the possible paths. The optimiser works fine, but if two of the costs are equal, the solution contains one more path that the minimum number of paths. (Think of it as load balancing routers; if two routes are same cost, you'll use them both.) I would like the minimum number of routes, and to do that I need a cost matrix that doesn't have two costs that are equal within a certain tolerance. At the moment, I'm passing the cost matrix through a baking function which tests every entry for equality to each of the other entries, and moves it a fixed percentage if it matches. However, this approach seems to require N^2 comparisons, and if the starting values are all the same, the last cost will be r^N bigger. (r is the arbitrary fixed percentage). Also there is the problem that by multiplying by the percentage, you end up on top of another value. So the problem seems to have an element of recursion, or at least repeated checking, which bloats the code. The current implementation is basically not very good (I won't paste my GOTO-using code here for you all to mock), and I'd like to improve it. Is there a name for what I'm after, and is there a standard implementation? Example: {1,1,2,3,4,5} (tol = 0.05) becomes {1,1.05,2,3,4,5}

  Read the article

• Standard term for a thread I/O reorder buffer?

  - by Crashworks

  I have a case where many threads all concurrently generate data that is ultimately written to one long, serial file. I need to somehow serialize these writes so that the file gets written in the right order. ie, I have an input queue of 2048 jobs j0..jn, each of which produces a chunk of data oi. The jobs run in parallel on, say, eight threads, but the output blocks have to appear in the file in the same order as the corresponding input blocks — the output file has to be in the order o0o1o2... The solution to this is pretty self evident: I need some kind of buffer that accumulates and writes the output blocks in the correct order, similar to a CPU reorder buffer in Tomasulo's algorithm, or to the way that TCP reassembles out-of-order packets before passing them to the application layer. Before I go code it, I'd like to do a quick literature search to see if there are any papers that have solved this problem in a particularly clever or efficient way, since I have severe realtime and memory constraints. I can't seem to find any papers describing this though; a Scholar search on every permutation of [threads, concurrent, reorder buffer, reassembly, io, serialize] hasn't yielded anything useful. I feel like I must just not be searching the right terms. Is there a common academic name or keyword for this kind of pattern that I can search on?

  Read the article

• php array split

  - by Rahul Mehta

  I am passing the space separated value to in input and split this in operation and make an array. givecard 442 ashutosh2 Y But i want to pass the message in this string and want to split as complete message in operation or output. givecard 442 ashutosh2 Y hi how are you if i split this line than i get the result is Array ( [0] => givecard [1] => 442 [2] => ashutosh2 [3] => Y [4] => hi [5] => how [6] => are [7] => you ) But i want like this Array ( [0] => givecard [1] => 442 [2] => ashutosh2 [3] => Y [4] => hi how are you ) as here hi how are you i want to extract as complete one message in a variable . How can i achieve this

  Read the article

• In Django, how to define a "location path" in order to display it to the users?

  - by naw

  I want to put a "location path" in my pages showing where the user is. Supposing that the user is watching one product, it could be Index > Products > ProductName where each word is also a link to other pages. I was thinking on passing to the template a variable with the path like [(_('Index'), 'index_url_name'), (_('Products'), 'products_list_url_name'), (_('ProductName'), 'product_url_name')] But then I wonder where and how would you define the hierarchy without repeating myself (DRY)? As far I know I have seen two options To define the hierarchy in the urlconf. It could be a good place since the URL hierarchy should be similar to the "location path", but I will end repeating fragments of the paths. To write a context processor that guesses the location path from the url and includes the variable in the context. But this would imply to maintain a independient hierarchy wich will need to be kept in sync with the urls everytime I modify them. Also, I'm not sure about how to handle the urls that require parameters. Do you have any tip or advice about this? Is there any canonical way to do this?

  Read the article

• Is this overly clever or unsafe?

  - by Liberalkid

  I was working on some code recently and decided to work on my operator overloading in c++, because I've never really implemented it before. So I overloaded the comparison operators for my matrix class using a compare function that returned 0 if LHS was less than RHS, 1 if LHS was greater than RHS and 2 if they were equal. Then I exploited the properties of logical not in c++ on integers, to get all of my compares in one line: inline bool Matrix::operator<(Matrix &RHS){ return ! (compare(*this,RHS)); } inline bool Matrix::operator>(Matrix &RHS){ return ! (compare((*this),RHS)-1); } inline bool Matrix::operator>=(Matrix &RHS){ return compare((*this),RHS); } inline bool Matrix::operator<=(Matrix &RHS){ return compare((*this),RHS)-1; } inline bool Matrix::operator!=(Matrix &RHS){ return compare((*this),RHS)-2; } inline bool Matrix::operator==(Matrix &RHS){ return !(compare((*this),RHS)-2); } Obviously I should be passing RHS as a const, I'm just probably not going to use this matrix class again and I didn't feel like writing another function that wasn't a reference to get the array index values solely for the comparator operation.

  Read the article

• How do I use the Enum value from a class in another part of code?

  - by ChiggenWingz

  Coming from a C# background from a night course at a local college, I've sort of started my way in C++. Having a lot pain getting use to the syntax. I'm also still very green when it comes to coding techniques. From my WinMain function, I want to be able to access a variable which is using an enum I declared in another class. (inside core.h) class Core { public: enum GAME_MODE { INIT, MENUS, GAMEPLAY }; GAME_MODE gameMode; Core(); ~Core(); ...OtherFunctions(); }; (inside main.cpp) Core core; int WINAPI WinMain(...) { ... startup code here... core.gameMode = Core.GAME_MODE.INIT; ...etc... } Basically I want to set that gameMode to the enum value of Init or something like that from my WinMain function. I want to also be able to read it from other areas. I get the error... expected primary-expression before '.' token If I try to use core.gameMode = Core::GAME_MODE.INIT;, then I get the same error. I'm not fussed about best practices, as I'm just trying to get the basic understanding of passing around variables in C++ between files. I'll be making sure variables are protected and neatly tucked away later on once I am use to the flexibility of the syntax. If I remember correctly, C# allowed me to use Enums from other classes, and all I had to do was something like Core.ENUMNAME.ENUMVALUE. I hope what I'm wanting to do is clear :\ As I have no idea what a lot of the correct terminology is.

  Read the article

• Best Practice for Summary Footer (and the like) in MVC

  - by benpage

  Simple question on best practice. Say I have: public class Product { public string Name { get; set; } public string Price { get; set; } public int CategoryID { get; set; } public bool IsAvailable { get; set; } } and i have a view using IEnumerable< Product as the model, and i iterate through the Products on the page and want to show the total of the prices at the end of the list, should I use: <%= Model.Sum(x=> x.Price) %> or should I use some other method? This may extend to include more involved things like: <%= Model.Where(x=> x.CategoryID == 5 && x.IsAvailable).Sum(x=> x.Price) %> and even <% foreach (Product p in Model.Where(x=> x.IsAvailable) {%> -- insert html -- <% } %> <% foreach (Product p in Model.Where(x=> !x.IsAvailable) {%> -- insert html -- <% } %> I guess this comes down to should I have that sort of code within my view, or should i be passing it to my view in ViewData? Or perhaps some other way?

  Read the article

• Why isn't our c# graphics code working any more?

  - by Jared

  Here's the situation: We have some generic graphics code that we use for one of our projects. After doing some clean-up of the code, it seems like something isn't working anymore (The graphics output looks completely wrong). I ran a diff against the last version of the code that gave the correct output, and it looks like we changed one of our functions as follows: static public Rectangle FitRectangleOld(Rectangle rect, Size targetSize) { if (rect.Width <= 0 || rect.Height <= 0) { rect.Width = targetSize.Width; rect.Height = targetSize.Height; } else if (targetSize.Width * rect.Height > rect.Width * targetSize.Height) { rect.Width = rect.Width * targetSize.Height / rect.Height; rect.Height = targetSize.Height; } else { rect.Height = rect.Height * targetSize.Width / rect.Width; rect.Width = targetSize.Width; } return rect; } to static public Rectangle FitRectangle(Rectangle rect, Size targetSize) { if (rect.Width <= 0 || rect.Height <= 0) { rect.Width = targetSize.Width; rect.Height = targetSize.Height; } else if (targetSize.Width * rect.Height > rect.Width * targetSize.Height) { rect.Width *= targetSize.Height / rect.Height; rect.Height = targetSize.Height; } else { rect.Height *= targetSize.Width / rect.Width; rect.Width = targetSize.Width; } return rect; } All of our unit tests are all passing, and nothing in the code has changed except for some syntactic shortcuts. But like I said, the output is wrong. We'll probably just revert back to the old code, but I'm curious if anyone has any idea what's going on here. Thanks.

  Read the article

• jquery dialog is clearing my form fields and I need to return a value from a jquery dialog

  - by Seth

  1.) I have a jQuery dialog that is opened whenever a particular textbox is focused. The dialog's contents are loaded from ajax and the unique ID of the textbox that was focused is passed in the ajax call (like this): $('[name=start_airport[]],[name=finish_airport[]]').click(function(){   var id = $(this).attr('id');   if($('#use_advanced_airport_selector').attr('checked')) {     $('#advanced_airport_selector').dialog({       open : function() {         $(this).load('/flight-booker/advanced-airport-selector.php?callerID='+id);       }     });     $('#advanced_airport_selector').dialog('open');   } }); (where advanced_airport_selector is an empty div) THAT PART WORKS FINE. However, when I make my ajax call within my dialog, all my form values are reset! No matter what I do, when that dialog opens, all form values are reset (not just the value of the textbox that was focused). I simply don't understand what would cause this behavior! But that's only issue #1. 2.) I need to be able to return a value from that dialog box. I am passing the ID in the ajax query so that I can use a jquery selector to update the caller's value after certain actions are performed within the dialog box. However, I can't actually access that textbox because of DOM_ERRORS that I've never come across. It doesn't make any sense! There's way to much code to post, and it's really hard to explain, so sorry if I'm unclear as to what I'm asking.

  Read the article

• Stuck trying to get Log4Net to work with Dependency Injection

  - by Pure.Krome

  I've got a simple winform test app i'm using to try some Log4Net Dependency Injection stuff. I've made a simple interface in my Services project :- public interface ILogging { void Debug(string message); // snip the other's. } Then my concrete type will be using Log4Net... public class Log4NetLogging : ILogging { private static ILog Log4Net { get { return LogManager.GetLogger( MethodBase.GetCurrentMethod().DeclaringType); } } public void Debug(string message) { if (Log4Net.IsDebugEnabled) { Log4Net.Debug(message); } } } So far so good. Nothing too hard there. Now, in a different project (and therefore namesapce), I try and use this ... public partial class Form1 : Form { public Form1() { FileInfo fileInfo = new FileInfo("Log4Net.config"); log4net.Config.XmlConfigurator.Configure(fileInfo); } private void Foo() { // This would be handled with DI, but i've not set it up // (on the constructor, in this code example). ILogging logging = new Log4NetLogging(); logging.Debug("Test message"); } } Ok .. also pretty simple. I've hardcoded the ILogging instance but that is usually dependency injected via the constructor. Anyways, when i check this line of code... return LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); the DeclaringType type value is of the Service namespace, not the type of the Form (ie. X.Y.Z.Form1) which actually called the method. Without passing the type INTO method as another argument, is there anyway using reflection to figure out the real method that called it?

  Read the article

• C++ CRTP(template pattern) question

  - by aaa

  following piece of code does not compile, the problem is in T::rank not be inaccessible (I think) or uninitialized in parent template. Can you tell me exactly what the problem is? is passing rank explicitly the only way? or is there a way to query tensor class directly? Thank you #include <boost/utility/enable_if.hpp> template<class T, // size_t N, class enable = void> struct tensor_operator; // template<class T, size_t N> template<class T> struct tensor_operator<T, typename boost::enable_if_c< T::rank == 4>::type > { tensor_operator(T &tensor) : tensor_(tensor) {} T& operator()(int i,int j,int k,int l) { return tensor_.layout.element_at(i, j, k, l); } T &tensor_; }; template<size_t N, typename T = double> // struct tensor : tensor_operator<tensor<N,T>, N> { struct tensor : tensor_operator<tensor<N,T> > { static const size_t rank = N; }; I know the workaround, however am interested in mechanics of template instantiation for self-education

  Read the article

• Should I base my Embedded Linux product on Qt?

  - by Udi

  My company is developing a medical product. One of the components is a pda-like platform that will run embedded linux. We were considering Qt as the UI framework but found out that Qt is a lot more than that (we are not familiar with Qt). In general, the device needs to do the following: 1. Receive measurements over USB HID from another device (USB HID is used for convenience). 2. Process the measurements. 3. Store them in a database. 4. Interact with the user using the device's touch screen lcd. 5. Communicate (wi-fi, tcp-ip) with a central management station that collects the data and configures the device. 6. Include a web server to allow accessing the device via a browser. We intend to program in C++. My questions are: 1. Is that a good choice for such a device? 2. Assuming we choose Qt, how do we build our product? - Do we use Qt just as a GUI framework and write the application code in a separate process (passing messages between Qt and the application process)? - Do we write the entire application inside Qt, using all of the services the tool has to offer? - Another approach?

  Read the article

• Processing a database queue across multiple threads - design advice

  - by rwmnau

  I have a SQL Server table full of orders that my program needs to "follow up" on (call a webservice to see if something has been done with them). My application is multi-threaded, and could have instances running on multiple servers. Currently, every so often (on a Threading timer), the process selects 100 rows, at random (ORDER BY NEWID()), from the list of "unconfirmed" orders and checks them, marking off any that come back successfully. The problem is that there's a lot of overlap between the threads, and between the different processes, and their's no guarantee that a new order will get checked any time soon. Also, some orders will never be "confirmed" and are dead, which means that they get in the way of orders that need to be confirmed, slowing the process down if I keep selecting them over and over. What I'd prefer is that all outstanding orders get checked, systematically. I can think of two easy ways do this: The application fetches one order to check at a time, passing in the last order it checked as a parameter, and SQL Server hands back the next order that's unconfirmed. More database calls, but this ensures that every order is checked in a reasonable timeframe. However, different servers may re-check the same order in succession, needlessly. The SQL Server keeps track of the last order it asked a process to check up on, maybe in a table, and gives a unique order to every request, incrementing its counter. This involves storing the last order somewhere in SQL, which I wanted to avoid, but it also ensures that threads won't needlessly check the same orders at the same time Are there any other ideas I'm missing? Does this even make sense? Let me know if I need some clarification.

  Read the article

• What is the correct high level schema.org microdata itemtype for a retail brand/company homepage?

  - by kpowz

  I'd like to hear which schema.org itemtype others would recommend using or have used in the case of completing a retail brand's company homepage microdata. Take for example TOMS's shoes: Example #1 - Using /Corporation as the high-level itemtype one can include a lot of great /Organization microdata, but nothing about the retail store. <html itemscope='itemscope' itemtype="http://schema.org/Website> <head></head> <body itemscope='itemscope' itemtype="http://schema.org/Corporation> various microdata here probably including Product microdata </body> </html> NOTE: the only schema.org property specific to /Corporation is tickerSymbol & TOMS doesn't have one. Example #2 - This code would work if TOMS started their own channel of physical retail stores & each location had it's own homepage. However, for TOMS's.com, although accurate schematically & more descriptive at the face, this is incorrect microdata markup for TOMS.com, because /ShoeStore derives from /LocalBusiness - which must represent a physical place. <html itemscope='itemscope' itemtype='http://schema.org/Website'> <head></head> <body itemscope='itemscope' itemtype='http://schema.org/ShoeStore'> a whole bunch of jabber here </body> </html> NOTE: Since TOMS is virtual & thus can't be a /Store this means you lose really cool properties like 'currenciesAccepted', 'paymentAccepted' & 'priceRange'. Is this just a 'sit and wait' situation until more schemas are approved for 'virtual places' or is there a validation-passing way to get the best of both worlds?

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >