Search Results

Search found 16560 results on 663 pages for 'high tech resources'.

Page 365/663 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• Idle VMware Guests Resource Consumption

  - by Ravenor

  I want to setup a number of guests with multiple CPUs (4) and at least 4Gb ram running Ubuntu Linux. These machines will mostly be idle, but from time to time their workload will require all their resources, especially the CPU. The hosts are ESXi 5.x. The question is, am I right in thinking that the resource consumption of the machines when idle will be negligible? We know this true of disk and the CPU. The only concern left therefore is memory. Since ESX over-commits memory it makes sense that unused memory of any guest is paged out. If my thinking correct?

  Read the article

• Intel Core i7-4960HQ vs. 4850HQ (Haswell) [on hold]

  - by Timothy R. Butler

  I'm looking at the new MacBook Pros and trying to decide between the Core i7-4960HQ (2.6 GHz) and i7-4850 (2.3 GHz). I've found some synthetic benchmarks comparing them, but I haven't found a lot of data, so I'd appreciate any pointers to good comparisons for the Haswell family (especially these two processors). My cursory analysis seems to suggest there isn't a huge gain from the extra 300 MHz. I'd like to determine not only whether this is generally true, but also to figure out if the gains that are made in performance come at too high of cost. Is the 2.6 going to be pushing the limits of what can fit in a thin laptop without overheating? I've looked at some of Intel's documentation, but have not been able to determine what the normal and maximum operating temperature differences are for the models. In the past, there have been times that Intel's fastest models in a given range ran especially hot and/or consumed significantly more power compared to slightly slower models. Do those concerns factor into the current generation?

  Read the article

• Doubts about Cloud Infrastructure

  - by Pravin

  Maybe a little more of the same questions that others have asked but wanted to clarify my doubt, for some years run my hosting company (reseller of esds) and I've done well so far, but I am determined to bring quality and server technology to offer another level. So far I have understood that there is a difference between cloud and cluster servers because the cluster function as load balancers that distribute in different servers roles and use the servers less overloaded in the cloud is the union of multiple servers and then the same is vitualized unlike the cluster that is allowed to use the resources of the CPU and RAM servers in the virtualized environment. My approach is to use 3 dedicated servers to create a cloud server, My doubts: Does this type of cloud servers are only reserved for big companies? (Either because the union of the servers is done by hardware or software with high price) What characteristics should these servers meet? Possibly through software which should be used? Available? Thanks for your time, Cheers!

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• What causes winsock 10055 errors? How should I troubleshoot?

  - by Tom Kerr

  I'm investigating some issues with winsock 10055 errors on a chain of custom applications (some of which we control, some not) and was hoping to get some advice on techniques to troubleshoot the problem. No buffer space available. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. From research, non-paged pool and ports seem to be the only resources which can cause this error. Is there another resource which might cause 10055 errors? Currently, we have perfmon counters setup on the applications and non-paged pool usage looks low in most circumstances. Open TCP connections looks low and I am unaware of another way to monitor ports. Since it only happens in production, we are unable to use more invasive counters. Is there some other tool or procedure you would recommend to diagnose which application is causing the issue?

  Read the article

• Is an Ethernet point to point connection without a switch real time capable?

  - by funksoulbrother

  In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

  Read the article

• DNS updating issue

  - by Will

  Hey guys, I'm new to serverfault so please excuse me if I sound a tad nub. I work in an environment that is kinda peace mealed together, and I honestly don't know how it works. I'm new to the IT field and am still in school. When I replace a PC I rename the old one to mo-o-pcname and give the new one the proper name of mo-pcname (mo is a location thing we use so it really doesn't apply to the problem.) The new PC will function on the network; it will have the ability to access network resources (printers, file shares, etc) and it will have the ability to get out to the internet. However I can no longer ping the machine. It would appear as if the DNS (A) record is not getting updated or something. Like I said I'm kinda new to the field and just trying to work through this problem. Thanks for your help.

  Read the article

• User cannot book a room resource in Exchange 2010

  - by bakesale

  Im having a problem with a specific user not being able to book a room resource. No error message is generated at all. The user attempts to add the room as a meeting resource and it simply doesnt register with the resources calendar. I have tested the resource with other accounts and other rooms for this user but it is only this room that is having issues for this user. This Exchange server was migrated from 2007 to 2010. All rooms except for the problem room were created back on Exchange 2007. This new room was created with Exchange 2010. Maybe this clue has something to do with the problem? This is a paste of the mailboxes folder permissions [PS] C:\Windows\system32Get-MailboxFolderPermission -identity room125:\calendar RunspaceId : 448ab44a-4c2a-4403-b46c-fce1106c0823 FolderName : Calendar User : Default AccessRights : {Author} Identity : Default IsValid : True RunspaceId : 448ab44a-4c2a-4403-b46c-fce1106c0823 FolderName : Calendar User : Anonymous AccessRights : {None} Identity : Anonymous IsValid : True

  Read the article

• Handling inconcistent resource availability in Project 2007

  - by Lachlan McDonald

  Afternoon all, I have four resources; a project manager, and three developers. The project manager can work anywhere from 9 to 5pm each day, but only for a total of 10 hours per week. It doesn't matter when he works, as long as he isn't over-allocated 10 hours per week. The developers on the other hand can only work up to 2 hours per day, for a total of 10 hours per week. If they work more than 2 hours in a day, they are over-allocated. How do I best configure Project to handle this kind of scheduling requirement?

  Read the article

• World Wide Publishing Service very slow to restart on IIS? Why?

  - by StacMan

  Every now and then, we look to restart our IIS server by restarting the "WWW Publishing Service". On most systems this would usually only take a minute or two, but this can often take up to 10 minutes to stop the server and restart. Does anyone know any way to work out what is taking so much time to stop the service? After reading up around the net I've learned this may be due to locked resources used by users and/or lower-level IIS cached items being recycled. But I cant seem to work out where I can validate if this is true on not. Also if anyone knows how to fix or speed this up, that would be excellent. We have a large codebase which contains over 280 aspx pages across the site. Our main domain contains about 100 aspx pages whilst the subdomains contain 15 or 20 each. Some specs: Code is written in C#; runs on .Net framework 2.0 Server Windows Web Server 2008 IIS7; DB running SQL Server 2008 Standard

  Read the article

• How well will ntpd work when the latency is highly variable?

  - by JP Anderson

  I have an application where we are using some non-standard networking equipment (cannot be changed) that goes into a dormant state between traffic bursts. The network latency is very high for the first packet since it's essentially waking the system, waiting for it to reconnect, and then making the first round-trip. Subsequent messages (provided they are within the next minute or so) are much faster, but still highly-latent. A typical set of pings will look like 2500ms, 900ms, 880ms, 885ms, 900ms, 890ms, etc. Given that NTP uses several round trips before computing the offset, how well can I expect ntpd to work over this kind of link? Will the initially slow first round trip be ignored based on the much different (and faster) following messages to/from the ntp server? Thanks and Regards.

  Read the article

• Stop SQL Server services from conveniently

  - by MedicineMan

  I have a general use laptop. I use it for games, development, and web surfing. I've just installed SQL Server 2008 with Analysis, Reporting, and Error reporting, as well as any of the other options on the installer. I also have a default instance of SQL server as well as a named instance. When I'm not doing development, I'd like to shut down these services conveniently. I'm thinking that a batch file would be good. What are the commands to shut these services down and release the associated memory and resources? It appears that: net stop MSSQLSERVER seems to stop the MSSQLSERVER instance. What about the other services?

  Read the article

• Where does apache store initialization state for mod_proxy_balancer

  - by khoxsey

  I run apache2 on Ubuntu as a caching load-balancing reverse proxy in front of a group of application servers. I have noticed that the balancer maintains some state for some of the attributes visible in /balancer-manager such as whether an IP is enabled/disabled, load factor, etc. My site has periods of high (and low) usage, and recently as I added a new server to the working group I noticed that the load balancer picked up the new server but had it set to Disabled. I'm curious where that data is stored, and/or how it is initialized.

  Read the article

• Windows / Apache / PHP CPU at 100% under small load

  - by Bart

  I have a Windows box loaded with Apache 2.2 and PHP 5.2. It runs great if only a few users are on it at a time, but under load testing (50 users for test #1), the CPU climbs up to 100%. Nearly all of this CPU usage comes from httpd.exe. I currently have PHP set up via php5_module, but one of the first things I plan to try next is to use FastCGI instead. Is FastCGI better at handling multiple connections? Any other ideas on what might be causing Apache to run so high?

  Read the article

• Using Windows 7 drivers in Windows Server 2008 R2

  - by Robert Koritnik

  Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

  Read the article

• Programmer Desk

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: $1000-$2000. Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly http://www.beyondtheofficedoor.com/adjustable-height-table.php The Herman Miller Sense desk looks nice: http://www.csnofficefurniture.com/asp/superbrowse.asp?clid=32&caid=&sku=HML1212&refid=PG7-HML1212 . Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• Streamline Active Directory account creation via automated web site

  - by SteveM82

  In my company we have high employee turnover, and hence our helpdesk receives about a dozen requests per week for new Active Directory accounts. Currently, we receive these requests simply via e-mail or voice-mail, and rarely do we have all of the information necessary to create the account. I would like to find a web application that can be used by a manager or supervisor to formalize the requests they make for AD accounts for new employees under their command. Ideally, the application would prompt for all of necessary information, and allow the helpdesk to review the requests and approve or deny each one. If approved, the application would take care of creating the account and send an e-mail to the manager. I have found several application on the Internet that handle self-service account management (i.e., password resets or update contact info), which is also nice to have, but nothing that streamlines the new account request and creation part. Can anyone make suggestions on such an application? Thanks.

  Read the article

• SQL Performance Problem IA64

  - by Vendoran

  We’ve got a performance problem in production. QA and DEV environments are 2 instances on the same physical server: Windows 2003 Enterprise SP2, 32 GB RAM, 1 Quad 3.5 GHz Intel Xeon X5270 (4 cores x64), SQL 2005 SP3 (9.0.4262), SAN Drives Prod: Windows 2003 Datacenter SP2, 64 GB RAM, 4 Dual Core 1.6 GHz Intel Family 80000002, Model 6 Itanium (8 cores IA64), SQL 2005 SP3 (9.0.4262), SAN Drives, Veritas Cluster I am seeing excessive Signal Wait Percentages ( 250%) and Page Reads /s (50) and Page Writes /s (25) are both high occasionally. I did test this query on both QA and PROD and it has the same execution plan and even the same stats: SELECT top 40000000 * INTO dbo.tmp_tbl FROM dbo.tbl GO Scan count 1, logical reads 429564, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. As you can see it’s just logical reads, however: QA: 0:48 Prod: 2:18 So It seems like a processor related issue, however I’m not sure where to go next, any ideas? Thanks, Aaron

  Read the article

• In SharePoint, why can I "multiple document upload" a 47,297 byte file, but not a 47,298 byte file?

  - by Jim

  It's strange. I can upload a document named 47k.txt that is 47,297 bytes using the "Multiple Document Upload" feature. However, if I add a single character to the end of the text file, the upload fails. Also, if I rename the file to 47k*x*.txt and try to upload it, it fails. This is the error I get in the SharePoint logs: Category: General Event ID: 8jzm Level: High Message: #90012: An error was encountered while processing files on the server. Try uploading one file at a time by using the single upload page. The same error is reported in a message box on the client side. Does anybody know why this would happen?

  Read the article

• Why would you ever set MaxKeepAliveRequests to anything but unlimited?

  - by Jonathon Reinhart

  Apache's KeepAliveTimeout exists to close a keep-alive connection if a new request is not issued within a given period of time. Provided the user does not close his browser/tab, this timeout (usually 5-15 seconds) is what eventually closes most keep-alive connections, and prevents server resources from being wasted by holding on to connections indefinitely. Now the MaxKeepAliveRequests directive puts a limit on the number of HTTP requests that a single TCP connection (left open due to KeepAlive) will serve. Setting this to 0 means an unlimited number of requests are allowed. Why would you ever set this to anything but "unlimited"? Provided a client is still actively making requests, what harm is there in letting them happen on the same keep-alive connection? Once the limit is reached, the requests still come in, just on a new connection. The way I see it, there is no point in ever limiting this. What am I missing?

  Read the article

• Task bar remains visible with "Auto-hide the task bar" checked in Windows 7.

  - by Corey

  It's about time that I figure this out. I can say with a pretty high confidence that I have experienced this issue in all consumer versions of Windows since XP. I keep "Auto-hide the task bar" checked to maximize screen real estate. Every once in a while, the task bar will refuse to hide while individual windows will continue to act as if that option is checked (by falling under the task bar). For years, I have fixed this by rebooting. Of course, I cannot predict the timing or frequency of the problem, so the process becomes burdensome. I want to know how this can be fixed without rebooting. It has affected my on multiple machines using multiple versions of Windows, so I cannot be the only one who is bothered by it. Can anyone help me solve this?

  Read the article

• Blue Screen Of Death after Graphics Card Update

  - by John Smith

  I recently installed the game watch dogs After installing it i upgraded the drivers on my graphics card AMD Radion R9 200 series via the catalyst software and since then windows has been crashing on an ad-hoc basis even when sitting idle I have recieved two different sets of errors OXOOOOOOO1 and VIDEO_SCHEDULER_INTERNAL_ERROR I am running windows 8.1 with the driver 14.4 from AMD My PC shouldnt really be having this problem as it is pretty high spec due to my work Any help would be greatly appreciated as it is driving me up the walls a bit [UPDATE 08-06-2014] I have been looking around online and have crashed the PC a few times now trying to recreate the bug I have looked into the event history viewer and gotten the following errors amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED acpusrsvc: GfxMemServiceInitialize: FAILED amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED amdacpusrsvc acpusrsvc: GfxMemServiceInitialize: FAILED I took some advice from the AMD forums to re-install the old drivers to see if they would work. I uninstalled the old ones first and installed directly from the CD I got the warnings below but the driver installed "successfully" The Warnings are amdacpusrsvc acpusrsvc: ConfigureFrameBufferMemory: FAILED. Hopefully this will spark something off for someone Thanks John

  Read the article

• Limiting Sybase ASE 15 CPU usage on VM

  - by reiniero

  I've set up a single CPU Sybase ASE 15.7 test/hobby/experimentation system on a Debian Squeeze x64 KVM VM. I notice the CPU load goes to 100% and stays there. Definitely not a Sybase guru, only interested to see if some programs I'm running work on the database. Looking at Sybase docs it seems ASE detects the machine is idle and then takes over all processing just waiting for a connection (and if needed, doing some housekeeping apparently). Normally that would be fine but as it is running in a VM it's taking away processor resources other VMs could use - and the increased fan noise of the PC near my desk annoy me. I've tried to remedy this: set the "runnable process search count" parameter from DEFAULT (2000 IRC) to 3 in /opt/sybase/ASE-15_0/SYBASE.cfg from http://sybase.reygrobellet.com/tutorials/install_sybase_vb/standalone04_configure_oralin11#TOC-Configure-kernel I added this to my /etc/init.d/sybase startup script: echo 0 /proc/sys/kernel/randomize_va_space (though I don't think it'll make much difference) How can I tell Sybase to "behave" and not hog the processor - I don't mind reduced performance.

  Read the article

• Laptop wakes from sleep, once, due to audio controller (Windows 7)

  - by stijn

  The laptop is a recent Dell XPS 15z and the problem is as follows (reproducible about 90% of tries): put laptop to sleep using either Start-Sleep or closing the lid laptop goes to sleep after about 5 seconds, but instantly wakes again showing a black screen (touching the keyboard or moving the mouse shows the login screen one normally gets after wake) login again, put laptop to sleep latop stays in sleep mode output of powercfg -lastwake after the first instant wake shows the audio controller is responsible. Why would that be, why only the first try, and how to fix this? Wake History Count - 1 Wake History [0] Wake Source Count - 1 Wake Source [0] Type: Device Instance Path: PCI\VEN_8086&DEV_1C20&SUBSYS_04461028&REV_05\3&11583659&0&D8 Friendly Name: Description: High Definition Audio Controller Manufacturer: Microsoft

  Read the article

• NFS failover WITHOUT DRBD?

  - by user439407

  So I am trying to set up a redundant NFS share in a cloud environment(all links internal, half gig links), and I am looking into using heartbeat for failover, but all the guides seem to be about combining DRBD and heartbeat to create a robust environment. If need be I can do that, but since my content is almost completely static, I would like to avoid the extra overhead and complexity of DRBD if possible, but still be able to fail over if one of the NFS servers fails. Is it possible to use heartbeat with NFS to achieve high-availability without using DRBD to copy the blocks? I am not married to NFSv4, so if NFSv3 over UDP is necessary, that won't be a problem(only a very small number of clients will be connecting to the share) Any comments are appreciated.

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >