Search Results

Search found 17501 results on 701 pages for 'stored functions'.

Page 366/701 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

• Speed up loading of test results from builds in Visual Studio

  - by Jakob Ehn

  I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

  Read the article

• Is your TRY worth catching?

  - by Maria Zakourdaev

    A very useful error handling TRY/CATCH construct is widely used to catch all execution errors  that do not close the database connection. The biggest downside is that in the case of multiple errors the TRY/CATCH mechanism will only catch the last error. An example of this can be seen during a standard restore operation. In this example I attempt to perform a restore from a file that no longer exists. Two errors are being fired: 3201 and 3013: Assuming that we are using the TRY and CATCH construct, the ERROR_MESSAGE() function will catch the last message only: To workaround this problem you can prepare a temporary table that will receive the statement output. Execute the statement inside the xp_cmdshell stored procedure, connect back to the SQL Server using the command line utility sqlcmd and redirect it's output into the previously created temp table.  After receiving the output, you will need to parse it to understand whether the statement has finished successfully or failed. It’s quite easy to accomplish as long as you know which statement was executed. In the case of generic executions you can query the output table and search for words like“Msg%Level%State%” that are usually a part of the error message.Furthermore, you don’t need TRY/CATCH in the above workaround, since the xp_cmdshell procedure always finishes successfully and you can decide whether to fire the RAISERROR statement or not. Yours, Maria

  Read the article

• Finding a way to simplify complex queries on legacy application

  - by glenatron

  I am working with an existing application built on Rails 3.1/MySql with much of the work taking place in a JavaScript interface, although the actual platforms are not tremendously relevant here, except in that they give context. The application is powerful, handles a reasonable amount of data and works well. As the number of customers using it and the complexity of the projects they create increases, however, we are starting to run into a few performance problems. As far as I can tell, the source of these problems is that the data represents a tree and it is very hard for ActiveRecord to deterministically know what data it should be retrieving. My model has many relationships like this: Project has_many Nodes has_many GlobalConditions Node has_one Parent has_many Nodes has_many WeightingFactors through NodeFactors has_many Tags through NodeTags GlobalCondition has_many Nodes ( referenced by Id, rather than replicating tree ) WeightingFactor has_many Nodes through NodeFactors Tag has_many Nodes through NodeTags The whole system has something in the region of thirty types which optionally hang off one or many nodes in the tree. My question is: What can I do to retrieve and construct this data faster? Having worked a lot with .Net, if I was in a similar situation there, I would look at building up a Stored Procedure to pull everything out of the database in one go but I would prefer to keep my logic in the application and from what I can tell it would be hard to take the queried data and build ActiveRecord objects from it without losing their integrity, which would cause more problems than it solves. It has also occurred to me that I could bunch the data up and send some of it across asynchronously, which would not improve performance but would improve the user perception of performance. However if sections of the data appeared after page load that could also be quite confusing. I am wondering whether it would be a useful strategy to make everything aware of it's parent project, so that one could pull all the records for that project and then build up the relationships later, but given the ubiquity of complex trees in day to day programming life I wouldn't be surprised if there were some better design patterns or standard approaches to this type of situation that I am not well versed in.

  Read the article

• Error when running debuild on package source

  - by Chris Wilson

  I'm attempting to build the squeak-vm source but am getting an error every time I do so. The output is: dpkg-buildpackage -rfakeroot -D -us -uc dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package squeak-vm dpkg-buildpackage: source version 1:4.0.3.2202-2 dpkg-buildpackage: source changed by José L. Redrejo Rodríguez <[email protected]> dpkg-source --before-build squeak-vm-4.0.3.2202 dpkg-buildpackage: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp rm -f unix/cmake/config.sub unix/cmake/config.guess /usr/bin/make -f debian/rules unpatch make[1]: Entering directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' QUILT_PATCHES=debian/patches \ quilt --quiltrc /dev/null pop -a -R || test $? = 2 Patch linex.patch does not remove cleanly (refresh it or enforce with -f) make[1]: *** [unpatch] Error 1 make[1]: Leaving directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' make: *** [clean] Error 2 dpkg-buildpackage: error: fakeroot debian/rules clean gave error exit status 2 debuild: fatal error at line 1337: dpkg-buildpackage -rfakeroot -D -us -uc failed

  Read the article

• PHP file_put_contents File Locking

  - by hozza

  The Senario: You have a file with a string (average sentence worth) on each line. For arguments sake lets say this file is 1Mb in size (thousands of lines). You have a script that reads the file, changes some of the strings within the document (not just appending but also removing and modifying some lines) and then overwrites all the data with the new data. The Questions: Does 'the server' PHP, OS or httpd etc. already have systems in place to stop issues like this (reading/writing half way through a write)? i. If it does, please explain how it works and give examples or links to relevant documentation. ii. If not, are there things I can enable or set-up, such as locking a file until a write is completed and making all other reads and/or writes fail until the previous script has finished writing? My Assumptions and Other Information: The server in question is running PHP and Apache or Lighttpd. If the script is called by one user and is halfway through writing to the file and another user reads the file at that exact moment. The user who reads it will not get the full document, as it hasn't been written yet. (If this assumption is wrong please correct me) I'm only concerned with PHP writing and reading to a text file, and in particular, the functions "fopen"/"fwrite" and mainly "file_put_contents". I have looked at the "file_put_contents" documentation but have not found the level of detail or a good explanation of what the "LOCK_EX" flag is or does. The senario is an EXAMPLE of a worst case senario where I would assume these issues are more likely to occur, due to the large size of the file and the way the data is edited. I want to learn more about these issues and don't want or need answers or comments such as "use mysql" or "why are you doing that" because I'm not doing that, I just want to learn about file read/writing with PHP and don't seem to be looking in the right places/documentation and yes I understand PHP is not the perfect language for working with files in this way...

  Read the article

• How To Scale Canvas In Android

  - by Daniel Braithwaite

  I am writing a android game using Canvas as the way to draw everything, the problem is that when i run it on different android phones the canvas dosn't change size i tried using canvas.scale() but that didn't make a i difference. The code i use for drawing is ... public void draw( Canvas c, int score ) { Obstical2[] obstmp = Queue.toArray(this.o); Coin[] cointmp = QueueC.toArray(this.c); for( int i = 0; i < obstmp.length; i++ ) { obstmp[i].draw(c); } for( int i = 0; i < cointmp.length; i++ ) { cointmp[i].draw(c); } c.drawText(String.format("%d", score ), 20, 50, textPaint); if( isWon && isStarted ) c.drawText("YOU WON", 20, 400, resPaint); else if( isLost && isStarted ) c.drawText("YOU LOST", 20, 400, resPaint); } The function above calls the draw functions for the entity's on the screen, theses function are as follows Draw Function For Obstical : public void draw( Canvas c ) { Log.i("D", "COIN"); coin.draw(c); } Draw Function For Coin : public void draw( Canvas c ) { obstical.draw(c); } How could i make the canvas re-size to it would look the same on any screen ? Cheers Daniel

  Read the article

• Ways to organize interface and implementation in C++

  - by Felix Dombek

  I've seen that there are several different paradigms in C++ concerning what goes into the header file and what to the cpp file. AFAIK, most people, especially those from a C background, do: foo.h class foo { private: int mem; int bar(); public: foo(); foo(const foo&); foo& operator=(foo); ~foo(); } foo.cpp #include foo.h foo::bar() { return mem; } foo::foo() { mem = 42; } foo::foo(const foo& f) { mem = f.mem; } foo::operator=(foo f) { mem = f.mem; } foo::~foo() {} int main(int argc, char *argv[]) { foo f; } However, my lecturers usually teach C++ to beginners like this: foo.h class foo { private: int mem; int bar() { return mem; } public: foo() { mem = 42; } foo(const foo& f) { mem = f.mem; } foo& operator=(foo f) { mem = f.mem; } ~foo() {} } foo.cpp #include foo.h int main(int argc, char* argv[]) { foo f; } // other global helper functions, DLL exports, and whatnot Originally coming from Java, I have also always stuck to this second way for several reasons, such as that I only have to change something in one place if the interface or method names change, and that I like the different indentation of things in classes when I look at their implementation, and that I find names more readable as foo compared to foo::foo. I want to collect pro's and con's for either way. Maybe there are even still other ways? One disadvantage of my way is of course the need for occasional forward declarations.

  Read the article

• Box2D how to implement a camera?

  - by Romeo

  By now i have this Camera class. package GameObjects; import main.Main; import org.jbox2d.common.Vec2; public class Camera { public int x; public int y; public int sx; public int sy; public static final float PIXEL_TO_METER = 50f; private float yFlip = -1.0f; public Camera() { x = 0; y = 0; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public Camera(int x, int y) { this.x = x; this.y = y; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void update() { sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void moveCam(int mx, int my) { if(mx >= 0 && mx <= 80) { this.x -= 2; } else if(mx <= Main.APPWIDTH && mx >= Main.APPWIDTH - 80) { this.x += 2; } if(my >= 0 && my <= 80) { this.y += 2; } else if(my <= Main.APPHEIGHT && my >= Main.APPHEIGHT - 80) { this.y -= 2; } this.update(); } public float meterToPixel(float meter) { return meter * PIXEL_TO_METER; } public float pixelToMeter(float pixel) { return pixel / PIXEL_TO_METER; } public Vec2 screenToWorld(Vec2 screenV) { return new Vec2(screenV.x + this.x, yFlip * screenV.y + this.y); } public Vec2 worldToScreen(Vec2 worldV) { return new Vec2(worldV.x - this.x, yFlip * worldV.y - this.y); } } I need to know how to modify the screenToWorld and worldToScreen functions to include the PIXEL_TO_METER scaling.

  Read the article

• OOP oriented PHP app source code samples and advice

  - by abel

  The day I have been dreading has arrived. I never felt OOP or good software design was important(I knew they were important, but I thought I could manage without them.). However having read otherwise almost everywhere on the interwebs, I started dreading the day when my client would ask me for new features in an existing app. The day has come and the pain is unbearable! I have never coded my PHP websites "properly"(PHP is my primary language and the bulk of my work. I am learning Python (using web2py)) I take care that the website doesn't fall apart in a daily use scenario. I code pages like I was creating a list of static html files with bits of "magic code" in each of them(this bugs me a lot). How do I make the whole app more or less a single object? For eg. How do I design the object model for an invoicing app? I use a lot of functions for doing any particular thing in the same fashion throughout the app(for eg. validation, generating ids, calculating taxes etc.). I know the basics of OOP in general. Can anyone point me to source code samples of functional apps written in php? Or can someone provide pointers so I can recode my existing apps in a more modular way.

  Read the article

• Starting out with OpenGL when most tutorials are out of date

  - by AUTO

  I'm sure there are already a bunch of questions like this asked, but the constant updating of the OpenGL library throws them all away, and in a month or two, the answers here will be worthless again. I am ready to start programming in OpenGL using C++. I've got a working compiler (DevCpp; do NOT ask me to switch to VC++, and don't ask me why). Now I'm just looking for a solid tutorial on how to program with OpenGL. My assistant found the tutorial provided by NeHe Productions, but as I've come to find out, it's WAY OUT OF DATE! (although I did pull together a basic window to support an OpenGL canvas) Then I went online, and found the OpenGL SuperBible, which apparently uses freeglut? But what I'd like to know is whether or not SuperBible 5th edition is up to date any longer. The suggestion to freeglut I found said the latest version was 2.6.0 but now it's 2.8.0! Is the OpenGL SuperBible still a good, and fairly up-to-date place to start? Is there a better place to go to learn OpenGL? Am I allowed to simply store freeglut in the DevCpp include directory (maybe in GL), or is there some important procedure? Are there any comments or suggestions that I didn't think to ask since I'm only just beginning? @dreta cleared some things up for me, so now I have a better idea of what to ask: I think I'd like to start out with OpenGL using a wrapper library instead of directly accessing OpenGL.I just think that, for a beginner, it would be easier for me to program and get good results, while I don't yet have to understand all the grimy details (as @stephelton mentioned). The problem is, I can't find any library that doesn't have undefined references to no longer supported functions. Freeglut sounds operational, but it still uses GLU.Does anyone know what I can do?Also, I tried compiling the first SuperBible's source, but I got errors since GLAPI is not being defined as a type, the error originating in the GLU library. I'd like to use the SuperBible, but I don't know how to fix this.

  Read the article

• Leveraging .Net 4.0 Framework Tools For Encrypting Web Configuration Sections

  - by Sam Abraham

  I would like to share a few points with regards to encrypting web configuration sections in .Net 4.0. This information is also applicable to .Net 3.5 and 2.0. Two methods can work perfectly for encrypting connection strings in a Web project configuration file:   1-Do It All Yourself! In this approach, helper functions for encrypting/decrypting configuration file content are implemented. Program would explicitly retrieve appropriate content from configuration file then decrypt it appropriately.  Disadvantages of this implementation would be the added overhead for maintaining the encryption/decryption code as well the burden of always ensuring sections are appropriately decrypted before use and encrypted appropriately whenever edited.   2- Leverage the .Net 4.0 Framework (The Way to go!) Fortunately, all needed tools for protecting configuration files are built-in to the .Net 2.0/3.5/4.0 versions with very little setup needed. To encrypt connection strings, one can use the ASP.Net IIS Registration Tool (Aspnet_regiis.exe). Note that a 64-bit version of the tool also exists under the Framework64 folder for 64-bit systems. The command we need to encrypt our web.config file connection strings is simply the following:   Aspnet_regiis –pe “connectionstrings” –app “/sampleApplication” –prov “RsaProtectedConfigurationProvider”   To later decrypt this configuration section:   Aspnet_regiis –pd “connectionstrings” –app “/SampleApplication”   The following is a brief description of the command line options used in the example above. Aspnet_regiis supports many more options which you can read about in the links provided for reference below.   Option Description -pe  Section name to encrypt -pd  Section name to decrypt -app  Web application name -prov  Encryption/Decryption provider   ASP.Net automatically decrypts the content of the Web.Config file at runtime so no programming changes are needed.   Another tool, aspnet_setreg.exe is to be used if certain configuration file sections pertinent to the .Net runtime are to be encrypted. For more information on when and how to use aspnet_setreg, please refer to the references below.   Hope this helps!   Some great references concerning the topic:   http://msdn.microsoft.com/en-us/library/ff650037.aspx http://msdn.microsoft.com/en-us/library/zhhddkxy.aspx http://msdn.microsoft.com/en-us/library/dtkwfdky.aspx http://msdn.microsoft.com/en-us/library/68ze1hb2.aspx

  Read the article

• Custom Session Management using HashTable

  - by kaleidoscope

  ASP.NET session state lets you associate a server-side string or object dictionary containing state data with a particular HTTP client session. A session is defined as a series of requests issued by the same client within a certain period of time, and is managed by associating a session ID with each unique client. The ID is supplied by the client on each request, either in a cookie or as a special fragment of the request URL. The session data is stored on the server side in one of the supported session state stores, which include in-process memory, SQL Server™ database, and the ASP.NET State Server service. The latter two modes enable session state to be shared among multiple Web servers on a Web farm and do not require server affinity. Implement Custom session Handler you need to follow following process : 1. Create class library which will inherit from  SessionStateStoreProviderBase abstract Class. 2. Implement all abstract Method in your base class. 3.Change Mode of session to “Custom” in web.config file and provide Provider as your Namespace with classname. <sessionState mode=”Custom” customProvider=”Namespace.classname”> <Providers> <add name=”Name” type=”Namespace.classname”> </sessionstate> For more Details Please refer following links :   http://msdn.microsoft.com/en-us/magazine/cc163730.aspx http://msdn.microsoft.com/en-us/library/system.web.sessionstate.sessionstatestoreproviderbase.aspx - Chandraprakash, S Technorati Tags: Chandraprakash,Session state Managment

  Read the article

• How to define type-specific scripts when using a 'type object' programming pattern?

  - by Erik

  I am in the process of creating a game engine written in C++, using the C/C++ SQLite interface to achieve a 'type object' pattern. The process is largely similar to what is outlined here (Thank you Bob Nystrom for the great resource!). I have a generally defined Entity class that when a new object is created, data is taken from a SQLite database and then is pushed back into a pointer vector, which is then iterated through, calling update() for each object. All the ints, floats, strings are loaded in fine, but the script() member of Entity is proving an issue. It's not much fun having a bunch of stationary objects laying around my gameworld. The only solutions I've come up with so far are: Create a monolithic EntityScript class with member functions encompassing all game AI and then calling the corresponding script when iterating through the Entity vector. (Not ideal) Create bindings between C++ and a scripting language. This would seem to get the job done, but it feels like implementing this (given the potential memory overhead) and learning a new language is overkill for a small team (2-3 people) that know the entirety of the existing game engine. Can you suggest any possible alternatives? My ideal situation would be that to add content to the game, one would simply add a script file to the appropriate directory and append the SQLite database with all the object data. All that is required is to have a variety of integers and floats passed between both the engine and the script file.

  Read the article

• How to drastically improve code coverage?

  - by Peter Kofler

  I'm tasked with getting a legacy application under unit test. First some background about the application: It's a 600k LOC Java RCP code base with these major problems massive code duplication no encapsulation, most private data is accessible from outside, some of the business data also made singletons so it's not just changeable from outside but also from everywhere. no business model, business data is stored in Object[] and double[][], so no OO. There is a good regression test suite and an efficient QA team is testing and finding bugs. I know the techniques how to get it under test from classic books, e.g. Michael Feathers, but that's too slow. As there is a working regression test system I'm not afraid to aggressively refactor the system to allow unit tests to be written. How should I start to attack the problem to get some coverage quickly, so I'm able to show progress to management (and in fact to start earning from safety net of JUnit tests)? I do not want to employ tools to generate regression test suites, e.g. AgitarOne, because these tests do not test if something is correct.

  Read the article

• SQL Saturday Atlanta: Intro To Performance Tuning

  - by Mike Femenella

  I'm looking forward to speaking in Atlanta on the 24th, will be fun to get back down that way to visit with some friends and present two topics that I really enjoy. First, an introduction to performance tuning. Performance tuning is a very wide and deep topic and we're staying close to the surface. I direct this class for newbie sql users who have less than 2 years of experience. It's all the things I wish someone would have told me in my first 2 years about what to look for when the database was slow...or allegedly slow I should say. We'll cover using profiler to find slow performing queries and how to save the data off to a table as well as a tour of other features. The difference between clustered, non clustered and covering indexes. How to look at and understand an execution plan (at a high level) and finally the difference between a temp table and a table variable and what the implications are of using either one in your code. That pretty much takes up a full hour. Second presentation, Loading Data in Real Time. It's really a presentation about partitioning but with a twist that we used at work recently to solve a need to load some data quickly and put it into production with minimal downtime. We'll cover partition functions, schemes,$partition, merge, sys.partitions and show some examples of building a set of partitioned tables and using the switch statement to move it from one table to another. Finally we'll cover the differences in partitioning between 2005 and 2008. Hope to see you there! And if you read my blog please introduce yourself!

  Read the article

• sp_ssiscatalog v1.0.1.0 now available for download

  - by jamiet

  13 days ago I wrote a blog post entitled Introducing sp_ssiscatalog (v1.0.0.0) in which I first made mention of sp_ssiscatalog, an open source stored procedure intended to make it easy to query the SSIS Catalog. I have been working on some enhancements since then and hence v1.0.1.0 is now available for download from Codeplex. What’s new in this release This release includes the following enhancements: [execution_id] now gets returned in a call to EXEC [dbo].[sp_ssiscatalog] @operation_type='exec'; Filter events by specifying packages to ignore EXEC [dbo].[sp_ssiscatalog] @operation_type='exec',@exec_events_packagesexcluded='SomePackage.dtsx,AnotherPackage.dtsx'; [event_message_id] is now returned in a list of events List of executions can now be filtered via a minimum and maximum execution_id EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_minimum_execution_id=198,@execs_maximum_execution_id=201 Events resultsets now have a field, [event_message_context_xml] that contains an XML document containing all [event_message_context] info (if any exists) Installation instructions Download the zip file at DB v1.0.1.0. It contains two files, SsisReportingPack.dacpac & SSISDB.dacpac Unzip to a folder of your choosing Open a command prompt and change to the directory into which you unzipped the files Execute: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /a:Publish /tdn:SsisReportingPack /sf:SSISReportingPack.dacpac /v:SSISDB=SSISDB /tsn:(local) (/tsn specifies the target server. Change as appropriate.) If everything works OK you’ll see something like the following: or depending on whether the target database already exists or not This will create a database called [SsisReportingPack] which contains [dbo].[sp_ssiscatalog] Feedback is welcomed! @Jamiet

  Read the article

• Dell Alps Touchpad not working

  - by ppls

  I have a Dell 17R SE with Ubuntu 13.04. The touchpad is recognized as PS/2 mouse out of the box, giving just normal touchpad behaviour, but no tap to click, no scrolling, etc. Most answers related to that issue suggest trying an ALPS driver from dahetral.com: http://www.dahetral.com/public-download For installing I followed the steps on this page: https://www.linuxwind.org/html/dell-touchpad-driver-for-ubuntu-13-04.html Now my xinput looks like this: Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Mouse id=13 [slave pointer (2)] ? ? AlpsPS/2 ALPS GlidePoint id=14 [slave pointer (2)] ? ? Logitech Bluetooth Mouse M555b id=16 [slave pointer (2)] My touchpad isn't working at all now, just the two hardware buttons for left and right mouse buttons work. Interestingly also the tap to click functions works, but only in the address bar of nautilus, nowhere (!) else. What can I do? I would even switch back to initial state, where at least the basic touchpad functionality worked, i I knew, how to get there.

  Read the article

• How do I get the correct values from glReadPixels in OpenGL 3.0?

  - by NoobScratcher

  I'm currently trying to Implement mouse selection into my game editor and I ran into a little problem when I look at the values stored in &pixel[0],&pixel[1],&pixel[2],&pixel[3]; I get r: 0 g: 0 b: 0 a: 0 As you can see I'm not able to get the correct values from glReadPixels(); My 3D models are red colored using glColor3f(255,0,0); I was hoping someone could help me figure this out. Here is the source code: case WM_LBUTTONDOWN: { GetCursorPos(&pos); ScreenToClient(hwnd, &pos); GLenum err = glGetError(); while (glGetError() != GL_NO_ERROR) {cerr << err << endl;} glReadPixels(pos.x, SCREEN_HEIGHT - 1 - pos.y, 1, 1, GL_RGB, GL_UNSIGNED_BYTE, &pixel[0] ); cerr << "r: "<< (int)pixel[0] << endl; cerr << "g: "<< (int)pixel[1] << endl; cerr << "b: "<< (int)pixel[2] << endl; cerr << "a: "<< (int)pixel[3] << endl; cout << pos.x << endl; cout << pos.y << endl; } break; I use : WIN32 API OPENGL 3.0 C++

  Read the article

• CodePlex Daily Summary for Tuesday, June 03, 2014

  CodePlex Daily Summary for Tuesday, June 03, 2014Popular ReleasesQuickMon: Version 3.14 (Pie release): This is unofficially the 'Pie' release. There are two big changes.1. 'Presets' - basically templates. Future releases might build on this to allow users to add more presets. 2. MSI Installer now allows you to choose components (in case you don't want all collectors etc.). This means you don't have to download separate components anymore (AllAgents.zip still included in case you want to use them separately) Some other changes:1. Add/changed default file extension for monitor packs to *.qmp (...VeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Keepass2Android: 0.9.4-pre1: added plug-in support: See settings for how to get plug-ins! published QR plug-in (scan passwords, display passwords as QR code, transfer entries to other KP2A devices) published InputStick plugin (transfer credentials to your PC via bluetooth - requires InputStick USB stick) Third party apps can now simply implement querying KP2A for credentials. Are you a developer? Please add this to your app if suitable! added TOTP support (compatible with KeeOTP and TrayTotp) app should no l...Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from http://www.microsoft.com/en-us/download/details.aspx?id=43126 This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy htt...Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Portable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Composite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsAirline Management Solutions: Three layers architecture PHP Maria DB Metro-StyleBAOnline: tttboomteam: Fitness videoscsv2xlsx: this project was created to simplify process of converting csv text files to Excel tables. It uses Apache POI to work with Excel Hazza.ShapeField: Adds a field that lets you input the name of a shape to be displayed.HP AGM Monitor Service: Just for internal usage.HP AGM RestAPI Wrapper: HP AGM Rest API .Net WrapperIO Performance Verifier: IO Performance verifier is for verifying IO from fx SAN/NAS in a virtualized environment on Windows servers. Useful to verify SLA or configuration change effectIRIS Tutorials: This a repository of tutorials for the IRIS Toolbox project.Node Service Host: Host application to run node app as a service. Runs service as root with app as specified user, restarts, logging. Linux, OSX and windows.SEND SMS ALERT FROM YOUR SOFTWARE / WEBSITE: SMS API allows you to send SMS to all mobile operators across Pakistan or any other country at very very cheap rates. It allows you to send SMS through http://CSharePoint Audit Facilities Demo: Sample demo code for SharePoint Audit Log extraction and methods used. SharePoint Permission Analyzer: Permission Analyzer will scan through a SharePoint site collection and create a permission structure of the site. Works on SharePoint 2010 and SP 2013Spotify WinRT Component: WinRT Component wrapper for libspotify https://developer.spotify.com/technologies/libspotify/Windows API Interop Library: A collection of interop code in C# for the Windows API. Key exported methods, constants and structures defined. Some extension methods for WinForms controls.WPF Pricing unit: await async wpf Entity framework 6zzswire: ????

  Read the article

• Library Organization in .NET

  - by Greg Ros

  I've written a .NET bitwise operations library as part of my projects (stuff ranging from get MSB set to some more complicated bitwise transformations) and I mean to release it as free software. I'm a bit confused about a design aspect of the library, though. Many of the methods/transformations in the library come with different endianness. A simple example is a getBitAt method that regards index 0 as the least significant bit, or the most significant bit, depending on the version used. In practice, I've found that using separate functions for different endianness results in much more comprehensible and reusable code than assuming all operations are little-endian or something. I'm really stumped regarding how best to package the library. Should I have methods that have LE and BE versions take an enum parameter in their signature, e.g. Endianness.Little, Endianness.Big? Should I have different static classes with identically named methods? such as MSB.GetBit and LSB.GetBit On a much wider note, is there a standard I could use in cases like this? Some guide? Is my design issue trivial? I have a perfectionist bent, and I sometimes get stuck on tricky design issues like this... Note: I've sort of realized I'm using endianness somewhat colloquially to refer to the order/place value of digital component parts (be they bits, bytes, or words) in a larger whole, in any setting. I'm not talking about machine-level endianness or serial transmission endianness. Just about place-value semantics in general. So there isn't a context of targeting different machines/transmission techniques or something.

  Read the article

• Ray Tracing concers: Efficient Data Structure and Photon Mapping

  - by Grieverheart

  I'm trying to build a simple ray tracer for specific target scenes. An example of such scene can be seen below. I'm concerned as to what accelerating data structure would be most efficient in this case since all objects are touching but on the other hand, the scene is uniform. The objects in my ray tracer are stored as a collection of triangles, thus I also have access to individual triangles. Also, when trying to find the bounding box of the scene, how should infinite planes be handled? Should one instead use the viewing frustum to calculate the bounding box? A few other questions I have are about photon mapping. I've read the original paper by Jensen and many more material. In the compact data structure for the photon they introduce, they store photon power as 4 chars, which from my understanding is 3 chars for color and 1 for flux. But I don't understand how 1 char is enough to store a flux of the order of 1/n, where n is the number of photons (I'm also a bit confused about flux vs power). The other question about photon mapping is, if it would be more efficient in my case to store photons per object (or even per Object's triangle) instead of using a balanced kd-tree. Also, same question about bounding box of the scene but for photon mapping. How should one find a bounding box from the pov of the light when infinite planes are involved?

  Read the article

• CodePlex Daily Summary for Saturday, July 27, 2013

  CodePlex Daily Summary for Saturday, July 27, 2013Popular ReleasesSharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.10: - Added support for RAR Decryption (thanks to https://github.com/hrasyid) - Embedded some BouncyCastle crypto classes to allow RAR Decryption and Winzip AES Decryption in Portable and Windows Store DLLs - Built in Release (I think)Memory Teaser Game: Full Release 1.1.0: -> Fixed Memory leak issue. -> Restart game button issue. -> Added Splash screen. -> Changed Release Icon. This is the version 1.1.0.0VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginOfflineBrowser: Preview Release: This is a preview release so that others can help me find bugs. This should be pretty stable, but any bugs found should be reported here as an Issue.Home Access Plus+: v9.4.0727: Released to allow you to disable secure LDAP queriesOpen Source Job board: Version X3: Full version of job board, didn't have monies to fund it so it's free.DSeX DragonSpeak eXtended Editor: Version 1.0.116.0726: Cleaned up Wizard Interface Added Functionality for RTF UndoRedo IE Inserting Text from Wizard output to the Tabbed Editor Added Sanity Checks to Search/Replace Dialog to prevent crashes Fixed Template and Paste undoredo Fix Undoredo Blank spots Added New_FileTag Const = "(New FIle)" Added Filename to Modified FileClose queries (Thanks Lothus Marque)Math.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...Microsoft .NET Gadgeteer: .NET Gadgeteer Core 2.43.800: The .NET Gadgeteer Core installer includes the core libraries and end user project templates for Microsoft .NET Gadgeteer. This is a prerequisite for end users to build and deploy .NET Gadgeteer projects. It includes a project template wizard in the New Project dialog in Visual Studio 2012 or 2010 (or express versions) under the Gadgeteer tab - ".NET Gadgeteer Application". This template uses a graphical designer built for Visual Studio which allows end users to visually configure .NET Gadget...FogBugzPd - Project Dashboard For FogBugz: 1.0: First public release of FogBugzPd. Zip File includes web application. Requires: IIS 7+ Sql Server 2008/2012 or Sql Server Express 2012 .NET 4.5Open Url Rewriter for DotNetNuke: Open Url Rewriter Core 0.4.3 (Beta): bug fix for removing home page New Tab with rules count for each Portal with memory use estimation OpenUrlRewriter_00.04.03_Install.zip : for dnn 6.01 to 7.06 OpenUrlRewriter71_00.04.03_Install.zip : for dnn 7.1KerbalAlarmClock: v2.5.0.0 Release: Version 2.5.0.0 Recompiled it for 0.21 Fixed some issues with Hyperbolic orbits and AN/DN NodesAJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.GoAgent GUI: GoAgent GUI 1.3.5 Alpha (20130723): ????????Alpha?，???????????，?????????????。 ??????????GoAgent???（???phus lu?GitHub??????GoAgent??????，??????????????????） ????????????????????????Bug ?????????。??????????????。 ????issue????，????????，????????????????。LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/New Projectsagree grammar engineering environment: agree is a concurrent parse/generation engine, a .NET implementation of the DELPH-IN joint reference formalism for natural language analysis. AWF's Utility Library: A collection of awf utilities C# chat client with server: Newest chat with client and server.Charming components for Windows Phone: Build Charming apps for Windows Phone. Adds ready-made Search, Share and Settings functionality to Windows Phone. Share more code across platforms.Darkorbit Configuration Manager: config manager dark orbit darkorbit eltepvpers heaven 'Heaven. configuration manager configurationmanagerDarkorbit MultiTool: dark orbit darkorbit multi tool mulitool heaven 'Heaven. elitepvpers awesome skylab bot trade bot techcenter bot multiaccount diabind: Python binding of DIA (Debug Interface Access) SDKDoodle .Net Connector: This library allows an easy access to the Doodle REST API.DssCECB Version 2.0: aaaeCommunity: e-communityEFDemo: This is a demo for Entity frameworkEmployee Directory Webpart in SharePoint 2010: Employee Directory for SharePoint 2010EntityContext: A lightweight wrapper around Entity Framework allowing for accessing some internals of the framework, as well as, some functionality usually required.EwsRelentless: This is a sample application which demonstrates you might place a heavy load of EWS calls against an Exchange server in order to test performance. FogBugzPd - Project Dashboard For FogBugz: This tool helps PMs, Tech Leads and Executives to see actual progress on the projects tracked in FogBugz.HP Battery Health Scan Script: Silently runs HP Battery Check Utility and saves result to an Access DB.I am following: Users can follow nearly everything in SharePoint 2013. This solution provides a list of followed contend where ever you need it in you SharePoint.Image Viewer: Simple image viewer written for academic purposes LIBRERIA PRISA: sistema de ventasLiduv: Facilitate teachers daily work including creating marks and lesson drafts, curricula and calculating marks for written tests etc.Maze Builder Library: A builder for random maze generationPayPal Express Checkout for nopCommerce: nopCommerce plugin to allow for PayPal Express Checkout. Full integration with shipping options.PsTest - UnitTesting for PowerShell: PsTest is a lightweight UnitTesting Module for use in PowerShell. It lets PowerShell users create, discover and run UnitTests in PowerShell.SIGE: sistema integral gestion educativaSql Mass Dumper: Sql Mass Dumper. A simple project to dump all the data in your SQL Server in XML or in JSON format.SSIS Wait Task: A SSIS task which suspends execution for a time period or until a specific time. Additionally a sql statement can be defined that can also delay execution.Tactical Combat - Unity3d Game: A first person shooter! The main character is Billy Hills, need a story plot.The open source customer relation and billing software.: Memtem in a open source customer relation and billing software written in C#.NET.Tridion Gateway Service: WCF Support for the Tridion TOM COM APIWINJS CTK: WinJS Control kit is a set of custom WINJS controls that are not supported by Windows 8.

  Read the article

• How to REALLY start thinking in terms of objects?

  - by Mr Grieves

  I work with a team of developers who all have several years of experience with languages such as C# and Java. Most of them are young enough to have been shown OOP as a standard way to develop software in university and are very comfortable with concepts such as inheritance, abstraction, encapsulation and polymorphism. Yet, many of them, and I have to include myself, still tend to create classes which are meant to be used in a very functional fashion. The resulting software is often several smaller classes which correctly represent business objects which get passed through larger classes which only supply ways to modify and use those objects (functions). Large complex difficult-to-maintain classes named Manager are usually the result of such behaviour. I can see two theoretical reasons why people might write this type of code: It's easy to start thinking of everything in terms of the database Deep down, for me, a computer handling a web request feels more like a functional operation than an object oriented operation when you think about Request Handlers, Threads, Processes, CPU Cores and CPU operations... I want source code which is easy to read and easy to modify. I have seen excellent examples of OO code which meet these objectives. How can I start writing code like this? How I can I really start thinking in an object oriented fashion? How can I share such a mentality with my colleagues?

  Read the article

• High resolution graphical representation of the Earth's surface

  - by Simon

  I've got a library, which I inherited, which presents a zoomable representation of the Earth. It's a Mercator projection and is constructed from triangles, the properties of which are stored in binary files. The surface is built up, for any given view port, by drawing these triangles in an overlapping fashion to produce the image. The definition of each triangle is the lat/long of the vertices. It looks OK at low values of zoom but looks progressively more ragged as the user zooms in. The view ports are primarily referenced though a rectangle of lat/long co-ordinates. I'd like to replace it with a better quality approach. The problem is, I don't know where to begin researching the options as I am not familiar either with the projections needed nor the graphics techniques used to render them. For example, I imagine that I could acquire high resolution images, say Mercator projections although I'm open to anything, break them into tiles and somehow wrap them onto a graphical representation of a sphere. I'm not asking for "how do I", more where should I begin to understand what might be involved and the techniques I will need to learn. I am most grateful for any "Earth rendering 101" pointers folks might have.

  Read the article

• K-12 and Cloud considerations

  - by user736511

  Much like every other Public Sector organization, school districts in the US and Canada are under tremendous pressure to deliver consistent and modern services while operating with reduced budgets, IT personnel shortages, and staff attrition.  Electronic/remote learning and the need for immediate access to resources such as grades, calendars, curricula etc. are straining IT environments that were already burdened with meeting privacy requirements imposed by both regulators and parents/students.  One area viewed as a solution to at least some of the challenges is the use of "Cloud" in education.  Although the concept of "Cloud" is nothing new in education with many providers supplying educational material over the web, school districts defer previously-in-house-hosted services to established commercial vendors to accommodate document sharing, app hosting, and even e-mail.  Doing so, however, does not reduce an important risk, that of privacy.  As always, Cloud implementations are viewed in a skeptical manner because of the perceived reduction in sensitive data management and protection thereof, although with a careful approach and the right tooling, the benefits realized by Clouds can expand to security and privacy.   Oracle's comprehensive approach to data privacy and identity management ensures that the necessary tools are available to support regulations, operational efficiencies and strong security regardless of where the sensitive data is stored - on premise or a Cloud.  Common management tools, role-based access controls, access policy management and engineered systems provided by Oracle can be the foundational pieces on which school districts can build their Cloud implementations without having to worry about security itself. Their biggest challenge, and it is a positive one, is how to best take advantage of Oracle's DB Security and IDM functionality to reduce operational costs while enabling modern applications and data delivery to those who needs access to it. For more information please refer to http://www.oracle.com/us/products/middleware/identity-management/overview/index.html and http://www.oracle.com/us/products/database/security/overview/index.html.

  Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >