Search Results

Search found 14923 results on 597 pages for 'settings bundle'.

Page 367/597 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• SSH Tunnel doesn't work in China

  - by Martin

  Last year I was working in China for a few months. I never bothered setting up a real VPN, but just created a SSH tunnel, and changed my browsers proxy settings to connect through it. Everything worked great (except flash of course) but that was fine. However, now I'm back in China but I'm having problems with this approach. I do the same thing as last time, and according to https://ipcheckit.com/ my IP address is indeed the IP of my (private) server in the US, and I'm logging in to my server using a fingerprint I created long before going to China so no MITM should be possible. Furthermore the certificate from ipcheckit.com is from GeoTrust - so everything should be OK However, I still can't access sites which are blocked in China. Any idea how this could be possible?

  Read the article

• Black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• Running ubuntu 10.04 without a laptop's primary display

  - by riteshmnayak

  I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

  Read the article

• how to set global PATH on OS X?

  - by lajos

  I'd like to append to the global PATH variable on OS X so that all user shells and GUI applications get the same PATH environment. I know I can append to the path in shell startup scripts, but those settings are not inherited by GUI applications. The only way I found so far is to redefine the PATH environment variable in /etc/launchd.conf: setenv PATH /usr/bin:/bin:/usr/sbin:/sbin:/my/path I coulnd't figure out a way to actually append to PATH in launchd.conf. I'm a bit worried about this method, but so far this is the only thing that works. Does anyone know of a better way?

  Read the article

• Windows 2008 - Define IP Order by port or service

  - by Josh

  I have a Windows 2008 server that has three IP bound to the NIC. I can select which IP Windows SMTP listens to, but I want to also set the IP address used when mail is sent. Where would I set which outbound IP to use when sending email? Without using real IPs, here is an example what I have setup. Three IPs associated with the server: 10.0.0.1 10.0.0.2 10.0.0.3 I setup the binding on 10.0.0.2 for port 25 in the SMTP server settings, so that it is the only IP that will respond for inbound. When I look at the email header from an email sent from that server, it lists the server with an address of 10.0.0.3. I would like it to use 10.0.0.2 so that when reverse DNS is performed, it maps back correctly.

  Read the article

• How to make Chrome open bookmarks and URLs in new tabs?

  - by MBraedley

  I principally use Firefox both at home and at work, but on occasion I use Chrome. I have Firefox working the way I like it by having it open bookmarks in a new tab when left clicked, as well, URLs open in new tabs. Although having URLs open in a new tab can be annoying if I type a bad URL, I still prefer it, but that's neither here nor there. I would like to replicate this behaviour in Chrome, and can't seem to find anything relavent in the settings. Is there any way of doing this without an extension? If not, can you point me towards an appropriate extension (I've already done a search and can't find what I'm looking for)?

  Read the article

• Disappearing mouse cursor in Word, Notepad, Outlook

  - by user161548

  I purchased a lenovo led monitor as a second monitor so I have dual screens now. Everything works great except all text programs make my cursor disappear on the new monitor. Everything works great on the old monitor but if I drag a text document to the new screen the cursor is invisible. Any ideas on what to try? Odd to me that it works on one and not the other so assuming it has something to do with the monitor but none of the settings seem to make a difference.

  Read the article

• PHP errors not being displayed

  - by Mike

  I'm using PHP with Apache on Ubuntu 12.10. Errors are not being displayed to the browser for some reason and I can't figure it out. I have the following in my php.ini file: error_reporting = E_ALL & ~E_DEPRECATED display_errors = On display_startup_errors = On log_errors = On I am also positive that I have edited the correct ini file by verifying it with php_ini_loaded_file(). I can also verify that the values are correctly set by doing the following in my script: echo ini_get("display_errors"); // Outputs 1 echo ini_get("display_startup_errors"); // Outputs 1 echo ini_get("log_errors"); // Outputs 1 echo ini_get("error_reporting"); // Outputs -1 I have tried what seems like every possible combination of these settings (and restarting Apache after each change) and it is just not outputting errors. I am also not using ini_set anywhere in the script. It is being set only from the ini file. Any ideas why errors aren't being displayed?

  Read the article

• Windows XP, have to use ctrl+alt+delete to log on as local administrator

  - by wickedj

  Hey, I have a weird issue, a user was was logging into a laptop using the local admin account which was working fine. I had to create another account on the system, which was also an admin account, when this happened the 'administrator' account disappeared from the 'choose an account to login with' screen. A quick workaround is available, if the user presses ctrl+alt+delete it brings you to the screen where you can type in the username and password, so by manually typing 'administrator' it can log in. Normally this would be easily fixed, I figured the admin account had somehow been disabled from the local system, but i checked all settings and it is setup fine. The laptop is not part of a domain, so I used the management console to delete the new account and all that succeeded in doing was making the 'choose an account to log in with' screen display no accounts to choose. So far I see nothing else to fix it, the option to change the default logon screen to style where you type the username and password also seems to be missing. any ideas?

  Read the article

• Hide unauthorized folders from view in webdav

  - by eric.s

  We have a Windows server running webdav. When a Mac connects to it they see the folders they do not have access to as a blacked out folder, and then the folders they do have access to as folders. This does not happen when a client using Linux or Windows connects. All users connect with their domain account credentials. I may not be searching properly to get the information I am looking for, so I turn here. Is this an issue that I should be researching on the Mac side, or ask our network team to be looking into settings on the server?

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

• Yum through http proxy

  - by eodchop

  I have several Fedora 13 servers that have to connect through an http proxy for yum updates. All port 80 traffic has to be routed through this proxy. I have setup the proxy server in the network settings GUI. I can browse the internet just fine. I have also setup my proxy information in /etc/yum.conf as follows: proxy=http:proxy.largecorp.corp/accelerated_pac_base.pac proxy_user=user proxy_password=password I then added the export HTTP_PROXY="http:proxy.largecorp.corp/accelerated_pac_base.pac" to /etc/bashrc and sourced the file. When i run yum update: Loaded plugins:presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) fro repository: fedora. Please verify its path and try again. All of the repo urls are the defaults, as this is a fresh install.

  Read the article

• Can only connect to sql server express 2012 via named pipes

  - by YetAnotherDeveloper

  I have sql server express 2012 installed on windows 2008, locally everything works just fine i can connect via tcpip and named pipes. Remotely i can connect with ssms only using named pipes. I have tried disabling the firewall on both sides to eliminate blocking traffic. i have toggled the tcpip setting on and off (i read somewhere that they got it working just but flipping them off and back on). I have double/triple checked all the settings that i'm aware of and everything seems to be correct. Tcp is enabled Tcp port is set to 1433, udp port is set to 1434 Server has static ip Start up log says: Server is listening on [ 'any' 1433]. Firewall rules are in place Any suggestions on things that i can look into? i have really just run out of ideas.

  Read the article

• How can I have two web roots on one server, so I can point two domains to two different roots?

  - by Daniel F. Dietzel

  I usually ask my n00b questions on Stack Exchange, but now I'm setting up a VPS and have a question. My usual site.com points to my VPS's IP xxx.xxx.xxx.xxx. Now I have a different domain, and I'd like to point that to another location, say xxx.xxx.xxx.xxx/myname. However, when I try to add that as an "A" record in the DNS settings it won't let me. FYI I'm using chicagovps.net with ubuntu 11.10 and Nginx. Thanks!

  Read the article

• Is there a way to get a shared spreadsheet to update without closing and reopening?

  - by Mike

  Using Excel 2010, I have a spreadsheet that is used by 3 different people at any one time. But if one person has the spreadsheet open on there PC the other people can only view it as read only. I have since shared the workbook and put the spreadsheet on a shared network drive and now they can all view the spreadsheet at the same time and edit it at the same time. The problem is that nobody can see the changes that the other users have made unless the close out of the spreadsheet and open it up again to view the changes. I have checked the settings of the shared workbook and on the advanced tab have tick the option that updates the information every 5 minutes but the information does not update until you close out and open the spreadsheet back up again. How can I fix this problem?

  Read the article

• I can access my company mail on iPhone, but not on a PC/Mac

  - by Philippe

  On my iPhone (4), I can set up my company e-mail, which allows me to receive and send e-mail and use the calender to manage appointments. The company is using Exchange 2003. The problem is that this is the only way I can access my e-mail when I'm not at the office. I've tried setting up an account on Outlook 2007, Outlook 2010, Outlook 2011 (Mac) and the OSX Mail app, but it doesn't work. The server cannot be reached, even though I've used the exact same settings as on the iPhone. The info I use on the iPhone is: Server name of the company mail server (it's the same as for webmail) Use SSL AD Domain of my account My AD account name Password When I enter this on the iPhone, it works like a charm, but whatever I try on one of my desktops, it doesn't work. FYI: I can't ask the company IT guys because according to them, it doesn't work from a remote location, not even on the iPhone (but obviously, that works just fine)

  Read the article

• Group policies - WSUS

  - by cory

  Hello, I am really lost as to what is the reason as to why my group policy is not working on my domain. I have setup a GPO for my wsus server to a specific OU in my domain. It seems as of right now, none of my machines have inherited that GPO. I have manually put it in quite a few computers. Most of my computers in the domain are linked up to my wsus server, but all my desired settings are not there. If I run gpresult /R, On one computer I ran this on, it is linking to my backup domain controller and not my main. On another computer I checked this on, it is linking to my main DC, but it did no inherit the GPO. When looking on my DC on gpmc - I see the policy is forced to the OU as #1 precedence. Thank for any help.

  Read the article

• Optimize Windows file access over network

  - by Djizeus

  At my company I frequently need to access shared files over a Windows network. These files are located on the other side of the planet, so I guess the file share goes through some kind of VPN over Internet, but I don't control this and it is supposed to be "transparent" for me. However it is extremely slow. Displaying the content of a directory in the file explorer takes about 10s. Even if over the Internet, I did not expect that retrieving a list of file names would be that long. Are there any settings to optimize this from my Windows XP workstation, or is it mostly related to the way the network is configured? The only thing I have found so far is to cache all file names, while by default only short file names are cached (http://support.microsoft.com/kb/843418).

  Read the article

• How can I continue audio playback even after switching user?

  - by klyonrad

  I just tested it with iTunes; after switching the user account (only after logging into another account, to be precise) the audio playback from the account "A" stops. However iTunes continues playing in the background; which I realized after switching back to account "A". Very frustrating because it kind-of is a deal-breaker for me; the other person should be able to have some personalized settings; while it is still my computer, and the main account has all the music obviously. The ideal solution would be audio output continuing running while user still has the ability to manually pause it... EDIT: I tested a bit more: "Desktop" apps like VLC don't output sound but continue running; the stock Music.app in Metro pauses the music and continues playing when switching back.

  Read the article

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• Inbox should not contain any calendar appointment

  - by cotablise

  Imagine two users A and B.User B has editor rights on mailbox A via delegation. Delegation settings: User A should not receive any invitation (calendar appointments). All should be routed to user B. It works fine when you are connected to mailbox via Outlook. Problem is that sometimes it does not work when user is connected via his iPhone (he receives calendar appointments in inbox). I know that this feature for MS products and therefore it works on MS Outlook. But user A told me that it worked in the past also on iPhone with user C. Problem is that nowadays it does not work perfectly for user B. Do you have any suggestion please? Thank you in advance.

  Read the article

• Poor TCP loopback throughput on Windows

  - by Yodan Tauber

  I measured the throughput of a locally bound TCP socket connection on my computer (Intel Q9550, 64 GB RAM, Windows XP 64 bit) using iperf. I got dissatisfying results (around 1.6 Gbit/s) each time, no matter how I tweaked the TCP settings (buffer length, window size, max segment size, no delay). I got similar results when I tried netperf. Now, I understand (from sources like these) that the average throughput of a loopback connection should be around 5 Gbit/s. What could be the reasons for such poor performance?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >