Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 368/647 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• Hard drive device names are different from one reboot to another in Ubuntu.

  - by Mike

  I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

  Read the article

• growing EBS RAID volume

  - by Ryan Fernandes

  I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. Any clue as to what went wrong?

  Read the article

• MySQL InnoDB Corruption after power outage, possible to recover?

  - by Tim Hackett

  Hey Guys, I recently started trying to get Redmine up and running after a power outage that seems to have corrupted our InnoDB database in MySQL. Redmine had an extensive set of documentation that I would like to get even if redmine isn't able to run. The service fails on startup. I have tried inserting innodb_force_recovery = 4 per the documentation from the url in the error log. (also tried 1 thru 6 as I have backed up all directories after the corruption) I have verified through "mysqld-nt --print-defaults" that it is starting with the recovery option in the params. The machine is running Windows Server 2003 SP2, Xeon E5335 with 2GB RAM, MySQL is not mirrored to another machine, nor is the machine a mirror. I do not have any backups because the previous person did not set them up. Here is the error log: InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100308 14:50:01 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 100308 14:50:02 InnoDB: Error: page 7 log sequence number 0 935521175 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 2 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 11 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 5 log sequence number 0 972973045 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 6 log sequence number 0 972984051 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 1577 log sequence number 0 972737368 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. InnoDB: Error: trying to access page number 4294965119 in space 0, InnoDB: space name .\ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10. InnoDB: If you get this error at mysqld startup, please check that InnoDB: your my.cnf matches the ibdata files that you have in the InnoDB: MySQL server. 100308 14:50:02InnoDB: Assertion failure in thread 960 in file .\fil\fil0fil.c line 3959 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: about forcing recovery. 100308 14:50:02 [ERROR] mysqld-nt: Got signal 11. Aborting! 100308 14:50:02 [ERROR] Aborting 100308 14:50:02 [Note] mysqld-nt: Shutdown complete

  Read the article

• Reputable TabletPC vendors

  - by snorfys

  I'm developing software for tablet pcs and so far I've used some lenovo's (x41), some toshiba's (portege m200) and some gateways (M275). Granted: the machines we've gotten have predominantly been refurbs, but they're failing 80-90% of the time. Part of the reason that they're failing is users inevitably dropping them, so I'm looking at potentially some rugged tablet pcs. The problem that I'm running into is that Current tablet pcs are high spec (much higher than I'm looking for at least) The rugged tablet manufacturer space seems to be filled with lots of small companies that I don't trust yet. I'm looking for tablet PCs (keyboard or no) that can support: XP tpc (optional win 7) single core 1.5-2ghz 1gb ram wifi optional gsm optional gps very optional vehicle docking solutions The budget I've got is tight (but slightly flexible - So are there any reputable tablet pc vendors out there that can do this.

  Read the article

• Hyper-V Boot failure on VHD made with Acronis?

  - by gary

  hoping someone can advise on my problem, I am running Hyper-V core and trying to create my first VM for testing purposes. Using Acronis True Image echo server with UR I converted a Seerver 2000 tib to VHD. I then copied this across to the Hyper-V local drive and created a new VM pointing the hard drive to the vhd image. When I boot this up all I get is "Boot failure. Reboot and Select proper Boot device or Insert Boot media in selected Boot device". The original server had SCSI disks, the Hyper-V server doesn't, but I have ensured that it boots from an IDE disk and that it is in fact booting from that not the CD. I can only imagine this is caused by the SCSI disks on VHD but cannot for the life of me work out how to fix, I have several of these I need to do so starting to worry now! I can confirm that when I did this from tib to vmdk it worked first time using VMware on a laptop. Any help very much appreciated. Gary

  Read the article

• Access Western Digital My Book World II RAID array on my Ubuntu Linux

  - by ZeDalaye

  Hi, My WD My Book World II (Blue Rings) NAS has overheated, I think the motherboard is dead. I extracted the disks and plugged them in my desktop PC running Ubuntu Linux. The disks seems to be alive, they are spinning and the BIOS recognize them but Ubuntu is not able to boot as soon as these drives are plugged in. I got an initramfs shell after few minutes telling explaining that the root disk is not available. I suspect that one of my WD drives took the precedence on the system ? Considering that Ubuntu is able to boot and can see my Western Digital disks... is it possible to access the RAID 0 array ? How ? Many thanks for your help, regards, -- Pierre Yager

  Read the article

• What’s the password for my FileVault 2 boot volume?

  - by cbowns

  Apple’s support document for FileVault 2 (a.k.a. “full disk encryption” or “FDE”) has lots of information about enabling FDE and what it means for booting the machine. However, it doesn’t cover one very important thing I’m trying to do: mount the drive in the Recovery HD environment to reinstall OS X on it. The Recovery HD environment asks me for the volume passphrase so it can mount my drive and try to install OS X onto it. If this were an external drive which I’d manually enabled FDE on with diskutil, or an external Time Machine volume, I’d know it because it makes you pick one (just like a regular login password), but FileVault 2 never asked me for a volume passphrase (I assume it selects one behind the scenes). I’ve tried my main user’s password, but that doesn’t work, and neither does the recovery key set for the volume. Keychain Access doesn’t have anything that I could find. How do I unlock this volume?

  Read the article

• VMFS recovery - how do you proceed?

  - by ToreTrygg

  The more I look into ESX the more often i have to handle cases where the partition table of a disk with a VMFS volume gets corrupted. The reasons for this can be * idiot user * failed update * power failure * .... I guess you guys must already have something like a usual procedure on how to work through this cases. I am especially interested in a straight fast way to find out if the VMFS volume itself is corrupted beyond repair. So far I use very time consuming attempts with scans with Testdisk and similar tools. Do you have better / faster ways ?

  Read the article

• howto copy files on esxi datastore using scp?

  - by maruti

  how to copy files on esxi4 datastore (fs=vmfs) over network using console (SSH)? giving up older question:have seen on vmware forums that its not possible have a USB drive NTFS attached to ESXi4 host. fdisk -l shows the device as /dev/mpx.... but when i try to mount that using mount /dev/xxx /mnt/usbdisk....it fails with message "no such file or dir" could anyone help with correct entry in etc/fstab? all that i am trying to do is backup the vms on esxi host to usb disk...thanks in advance there is a dir called usbdrv, tried cp of vmdk file here but failed

  Read the article

• Very High Interrupt CPU usage in Win2k3 VM on vSphere

  - by Darragh

  Hi, I've been testing some software in a server virtual environment and I've noticed I get a huge amount of CPU usage on the Interrupts process. My question is, how does this relate to the virtual hardware platform as the rate is allot lower in a real system. Some how the hypervizor scheduler works hard to over come this problem but not as well as on real hardware does. Obvious things are high I/O and disk access but this application mostly just sits and works in memory allot. If anyone has experienced the same, please let me know. thanks in advance Screenshot: Process Explorer

  Read the article

• Overriding destination directory from ROBOCOPY Job file?

  - by marc_s

  I am using Robocopy for backing up my project directories to an external disk, and it works like a charm. Except for one little issue: sometimes, I wish I could override the destination directory which I specify in my Robocopy Job file (myproject.rcj) to send the files somewhere else. So if I have this in my myprojects.rcj: :: Robocopy Job MYPROJECT.RCJ :: Source Directory : /SD:d:\MyProject :: Source Directory. :: Destination Directory : /DD:f:\MyDefaultDestination :: Destination Directory. is there any way I can instruct Robocopy to use a different destination when executing it using a job? So I execute Robocopy like this: robocopy /job:myproject.rcj and I wish I could override the default destination directory by using: robocopy /job:myproject.rcj /DD:X:\OtherDestination but that doesn't seem to work..... ERROR : Invalid Parameter #2 : "/DD:X:\OtherDestination" Any ideas??

  Read the article

• Can't login to Manager App in Tomcat 6.0.18

  - by Rafael Almeida

  Folks, I can't login to the manager app (localhost:8080/manager/html) in my Tomcat. More specifically, it asks for my username and password, and the ones supposed to be correct aren't accepted. Here's what I already checked: I tried editing my conf/tomcat-users.xml to add my user/role. Here's the current content of this file: <?xml version='1.0' encoding='utf-8'?> <tomcat-users> <role rolename="manager"/> <user username="tomcat" password="s3cret" roles="manager"/> </tomcat-users> I thought that maybe it wasn't looking up on this XML, but elsewhere. So, I came to know about Realms. The Realm part of my configuration is now: < Realm className="org.apache.catalina.realm.MemoryRealm" / ( please ignore the space before Realm, for some reason this site isn't accepting the literal tag ) What am I missing?

  Read the article

• Can Windows log CryptoAPI CRL timouts?

  - by makerofthings7

  We have several .NET applications that occasionally "act slow" with no CPU or disk access. I suspect that they are hung up on authentication when trying to validate the certificate, since the timeout is almost 20 seconds. As per this MSFT article Most applications do not specify to CryptoAPI to use a cumulative time-out. If the cumulative time-out option is not enabled, CryptoAPI uses the CryptoAPI default setting which is a time-out of 15 seconds per URL. If the cumulative time-out option specified by the application, then CryptoAPI will use a default setting of 20 seconds as the cumulative timeout. The first URL receives a maximum timeout of 10 seconds. Each subsequent URL timeout is half of the remaining balance in the cumulative timeout value. Since this is a service, how can I detect and log CryptoAPI hangs for applications I have sourcecode to, and also 3rd party

  Read the article

• what service to restart for /var/log/auth.log to start

  - by Bond

  Here is a situation since the log files on my server had grown to several Gigabytes I took a backup of directory /var/log and then manually when to each subdirectory of /var/log and the files which were big in size I did cat > /var/log/file_which_is_big press 2 times enter key (basically over wrote those files with a blank space) and then Ctrl+C So basically I over wrote those files to be blank. Now when I open /var/log/auth.log I don't see any entry (which is expected also since I over wrote) but when I exit the SSH session and login again then also I do not see any entry in auth.log is there any way other than rebooting the machine to make sure I keep getting the entries in /var/log/auth.log I am not sure which service writes in this file. This is a Ubuntu 10.04 server.

  Read the article

• Campus Network Design - Firewalls

  - by user3081239

  I am designing a campus network, and the design looks like this: LINX is The London Internet Exchange and JANET is Joint Academic Network. My goal is an almost-fully redundant with high availability, because it will have to support about 15k people, including academic staff, administrative staff and students. I have read some documents in the process , but I am still not sure about some aspects. I want to dedicate this one to firewalls: what are the driving factors in deciding to employ a dedicated firewall, instead of an embedded firewall in the border router? From what I can see, an embedded firewall has these advantages: Easier to maintain Better integration One less hop Less space requirement Cheaper Dedicated firewall has the advantage of being modular. Is there anything else? What am I missing?

  Read the article

• How to move linux executables to a ramdisk?

  - by alfa64

  i've made a ramdisk this way: mkdir -p /media/ramdisk mount -t tmpfs -o size=512M tmpfs /media/ramdisk/ The reason for this is because i run a lot of node.js scripts and their execution time is very small, but i suspect that the time overhead is because it reloads the node.js executable from disk and destroys it on each subsecuent run. So i think this might be the solution to gain a bit, if not much, performance. How can i move a program like node to the ramdisk and run it from there? The idea is to have a startup script that creates the ramdisk and puts the node files inside of it. Note that i'm currently using fedora 16 for what's it's worth. Thanks in advance.

  Read the article

• Portable server room air-con options

  - by Bridgette

  We are looking for portable industrial aircond for our server room which whould blow hot air to the sealing cavity, split-system is not an option (http://www.ikoo.com.au/Aircond.png). Something exactly like this would be ideal, but unfortunately not available in AUS: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ACPA4000&ISOCountrycode=us http://www.apcmedia.com/salestools/ASTE-6Z2RUU_R1_EN.pdf. So we pretty much looking for competing products to the APC's NetworkAIR PA4000 available in AU. ? We currently have 3 x DeLonghi Penguino PACT120, but space is limited and getting more of these is prob not ideal.

  Read the article

• Linux partitioning problem

  - by Claudiu

  I am using cfdisk to repartition my hdd as from OS install I only got 1 big partition a swap. I wanted to resize the big partition to 1 GB /boot and use the rest of the space for an extended partition. After I do cfdisk, I recheck the partitions with fdisk -l and I get these: Disk /dev/sda: 320 GB, 320070320640 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda3 1 38455 308881755 f Extended LBA Warning: Partition 3 does not end on cylinder boundary. /dev/sda2 38455 38698 1951897 82 Linux swap /dev/sda1 * 38699 38913 311349654 83 Linux My problem is the Warning message, I think I know the cause, I think its because of sda1 Blocks size. How could that be soo big if Start and End interval is small?

  Read the article

• Optimum no./size partitions for Windows 7

  - by Pat. Mitchell

  I plan to install a 500GB drive in my notebook (HP dv2613tu/1.5gHz/4MB RAM) and need advice about optimum size and number of partitions to create. Ideally looking for the following: OS (Windows 7 Ultimate) Swap file Applications Data ??? As a long time Mac user I'm not nearly as informed about Windows. I could leave everything as a single partition, but am seeking maximum performance and efficiency from my system (which won't be changing anytime soon). So, would separate partitions help with this aim? And given my usual habit of accumulating stuff, I want to reserve most space for Applications and Data. I've also set myself a project over the next couple of years of digitizing the whole of my 35 y.o. collection of slides and photographs from my travelling days. Thanks. Pat. Mitchell

  Read the article

• Which process is using my NAS?

  - by sethu

  I have a nas connected to my cluster. The NAS holds all our home directories. When I did a set of experiments last week, saving a 1 GB file to the nas took around 30 seconds. If i do the same to a local disk it takes 18 seconds. But when I tried doing the same process today, it takes 150 seconds. I am unsure what is the problem . Can someone help me pointout the issue? Is it possible to find out which process is accessing the NAS or how much NAS bandwidth is getting used ? Thanks for your help. -Sethu

  Read the article

• Tokyo Tyrant ulog / update log management.

  - by Nathan Milford

  I'm testing Tokyo Tyrant in a master-master setup and have found the ulog grows out of control and locks up the disk. At first I found the -ulim option useful and limited the logfile size, however it simply rolls over to a new log, leaving the old ones to clutter up the partition. I suppose I'll write a shell script that will delete ulogs older than X, once I find out how far back Tokyo Tyrant needs in the update log in order to failover. Does anyone have any experience with this Tokyo Tyrant? Do you have a feel (acknowledging that every install is different based on what is being stored) for the optimal ulog size vs how far back a Tokyo Tyrant instance needs to look in the ulog to assume master status? Thanks, nathan

  Read the article

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• Windows 7 CHKDSK log - What is "Internal Info"?

  - by Ron Klein

  If I run Disk Scan (CHKDSK) on Windows 7, I get the log in the event viewer. If I look inside it, I can see some kind of a binary dump: Internal Info: 00 4f 05 00 53 4a 05 00 ec 46 09 00 00 00 00 00 .O..SJ...F...... fa 03 00 00 5c 00 00 00 00 00 00 00 00 00 00 00 ....\........... 48 93 42 00 50 01 41 00 f8 1f 41 00 00 00 41 00 H.B.P.A...A...A. Is there any meaningful information in that field, other than debug info for the programmers who developed this tool?

  Read the article

• Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

  - by nicorellius

  I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

  Read the article

• Problem with using sysprep tool for running Windows on a different Hardware

  - by Usman Ajmal

  Hi, I am using sysprep tool for running Windows 7 on a different Hardware. What I do is that run sysprep on a computer, select System Audit, check the Generalize check box, select Shutdown, click OK and wait for the computer to shutdown. When the system shuts down, I remove the hard disk from my computer and plug it into another computer having different Hardware. Then I turn ON the computer and after a series of operations (including one reboot), I eventually get to the Desktop of Windows on the changed hardware computer BUT the problem is that System Preparation Tool's start up automatically. I rebooted the computer but the System Preparation Tool start up each time. One more thing that noted was that computer gives a message at each reboot before loading Desktop that "System is now preparing your computer for first use". Any idea how can i get a clean Desktop after performing sysprep? or is there any step I am missing? Thanks a lot

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >