Search Results

Search found 11961 results on 479 pages for 'boot arguments'.

Page 369/479 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• Update a war on Tomcat start up

  - by pater

  I want to setup an update process for an application running on Tomcat. The server which hosts tomcat is only open during working hours (it is an intraner application for a small company). I was thinking that I could upload the new war to the server and set up "something" to run on the next server boot. This something could be a bat file that will be executed on server start up but before the start up of the Tomcat service and it will delete the old war and its exploded folder. When I update manually the war I also delete the work folder of Tomcat (just to be sure). I know about hot deployment but I do not consider it an option since I am not very sure for the implications it might have on the users current working sessions. Is there a way to run such a bat file before Tomcat start up or an alternative way to do this update? Tomcat version isn't an issue. Now is running Tomcat 6 but I can upgrade to version 7 if needed.

  Read the article

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• how to stop a driver from running - it self protected and rootkit hidden

  - by Aristos

  I have this serous problem For the first time I can not stop a program from running. Something is on one laptop computer that is run as system legacy driver, and self protected and hidden on service as rootkit. Anything I try to remove fails. When a program or anti toolkit try to remove the hidden registry setting for make it stop I get this error : "a device attached to the system is not functioning" So any idea that can help me stop it from running, or even delete it on start up ? My one limitation is that the hard drive is on a laptop and I can not remove it and attact it to somewhere else. This program not let me, touch the registry, do not let me touch the file, do not let me touch the file, The move on boot fail to delete it, the rootrepeal fail to delete it, the rootkiet reveal from sysinternals fail to reveal it ! everything fails. Do how have any experience on this, or do you have any suggestion how to stop this driver from run ?

  Read the article

• HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

  - by TiansHUo

  My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

  Read the article

• Recovering mail from hardrive (broken os).

  - by Maciek Sawicki

  Hi, Friend of mine broke his Windows (doesn't boot). I will probably have to reinstall OS. I want to mount his hard drive in my OS to beck up some important files. He sad he uses Outlook express, but he Use Vista so I'm not sure it's Vistas Mail Client or Outlook. What files I have to copy to backup mail and adders book from Outlook, Outlook Express and Windows Mail? Is it any good program for doing it automatically (for Linux or Windows)? If there are tools or special procedures for other mail clients (for example Thunderbird) you can also name them to make this question more generic.

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• Unable to get to main screen and safe mode doesn't help.

  - by Link

  It is my friends computer so I am not very familiar with it, I am unable to get it to start. I can get to the logon screen but after entering the password there is an error (something to do with Roxio) and only the background loads. No Start menu, Taskbar or icons. If I boot it in safe mode it gets stuck on a black screen and don't even get the command prompt. I am confident that If I could get to the menu to edit startup programs then I could fix the problem... any Ideas?

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Why does diskpart set the volume attributes on all volumes?

  - by Nick

  I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Run non-interactive script in single user mode

  - by Jed Daniels

  Is it possible to run a "startup" script when booting into single user mode? I need to be able to boot into single user mode, run my script, then reboot into multiuser mode without any human interaction. I've done a bunch of research and can't find anything that is clear on the topic, although of course I could replace something else that does run with a wrapper that also launches my script, but I'd prefer to do it in some official way. Ideally, the solution will work in FreeBSD 6 and up, but I'm willing to accept only new versions if it just doesn't exist in the older revs.

  Read the article

• What did Emolator do with My Laptop?

  - by Garry

  I played SEGA with my KEGA.exe (Sega Emulator) and it made my right key to be malfunctioned. Befor that day, I had played it, too in my notebook with fullscreen mode, and suddenly my ACER Aspire One notebook restarted during that emulator was running and before the screen was black (boot), my screen was blue with many words but I couldn't read them, but I remember that there was a word like 000000 x 0000000 x 000000 and bla bla bla. And when I played without fullscreen mode, It didn't happened but it made my right key to be malfunctioned until when I went to Bot setup, my right key doesn't work. Do U know what is the problem of my emulator? Can U explain me for that?

  Read the article

• Hibernate speed, and hard drive temperature

  - by cometbill

  My computer is taking in the region of 4 minutes or so, to hibernate 4GB of RAM. Also, resting my hand on the top of it is rather hot to the touch, so I ran CrystalDisk Info and that is reporting a temperature of 49 degrees C. I It's a Western Digital 5400 rpm drive, I've had it in the laptop since I bought it for most of the 2.75 years I've had it. Power on Count is 1219 Power on Hours is 3940 hours Boot up time is quicker than resuming from hibernate, too. Is there anything I can / should check ? Advice is greatly appreciated.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Is there a clean way to tell Windows to release a volume?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive and has to abort there. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away?

  Read the article

• apache not starting in vagrant vm

  - by jimmyjambles

  I used Puphpet.com to create a Vagrant VM to be used for web development. The problem I am having is that the VM cannot start apache on boot. $ sudo /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: apache2: Syntax error on line 36 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/authz_default.load: Cannot load /usr/lib/apache2/modules/mod_authz_default.so into server: /usr/lib/apache2/modules/mod_authz_default.so: cannot open shared object file: No such file or directory Action 'configtest' failed. The Apache error log may have more information. the system is ubuntu 12, not sure what modifications I have to make to the puppet config to fix the problem.

  Read the article

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

• Resize PV on LVM

  - by Paul Tarjan

  I have this: Device Boot Start End Blocks Id System /dev/sda1 * 1 1217 9775552 83 Linux /dev/sda2 1218 60801 478608480 83 Linux And I'd like to shrink sda2 by about 10 Gigs to give some more space to sda1. sda2 is a PV on an LVM, but there is some free space in the VG so I don't have to worry about filesystem shrinking. How can I tell my LVM to move the data off of the first 10 gigs of sda2 and then redo my partition table to give it to sda1? (I don't have enough free space to just pvremove sda2, which would be the easy solution).

  Read the article

• mirroring linux server to external usb harddrive

  - by DuPie

  My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

  Read the article

• Laptop Locking Up

  - by David

  I am having a very weird issue on a Lenovo W510 laptop. It will lock up randomly. I have had it lock up during post, during the boot-up of Linux, during login, and after the login. The following are tests that I have performed on the laptop. I ran memtest I took out the extra memory module. I swapped the HDD with another HDD that had Windows 7 on it. (It BSOD'd, and before anyone could possibly read the error line, it restarts.) I tried taking the battery out and booting with only the Power cord. The only other options I can think of the problem being are the motherboard or the PSU. If anyone has any advice, I appreciate it. If not, the HP guy will be here in a few days to fix it. I would just love to call them up and tell them that the service is no longer needed.

  Read the article

• mounting vsphere 4.0 file system in ubuntu linux

  - by sravan

  hi all, I am using VSpere 4.0 for my project work. I needed 4-5 servers my project work which is based on Database. I felt the virtualisation is very good to get the 5 servers running good at the same time. It was running good until few days back. Yesterday, it suddenly crashed and i had no idea of the reason.Today, it did not even boot up. Now, i need to take the data backup from that system. In order to do the same, i got the hard drive from the machine and tried to mount it on local linux machine.But, i was not successful. The disk was not even recognized by the linux machine. Can some one please tell me how to mount it and get the required data? Thank you all

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• ASUS EeePC 1001PX, hard disk clicking in Ubuntu Maverick

  - by MeanEYE

  I just received my new Asus EeePC 1001px netbook. After installing Ubuntu 10.10 on it, I've noticed that my hard drive is making a clicking noise. Now this is not a loud clicking noise nor it's constant (only sounds occasionally and when hard disk is not writing or reading anything). Another strange thing is, this only happens when netbook is using battery power, the moment I plug in AC power clicking stops. Additionally I noticed that when I go into BIOS I can hear the click only once, same thing happens if I boot Ubuntu from USB. That led me to believe the problem is within operating system. I did all the surface scans and SMART tests and everything seems to be fine. Now noise sounds like heads are trying to "park" themselves so I tried disabling "spin down" option in Power Management but it didn't help. Any idea?

  Read the article

• How to redirect third party logs to log server in Centos

  - by chandank

  I want to setup a simple log server to accept logs from all clients. I am not talking about standard system logs such as /var/log/mail , message, boot etc. I want to redirect or send application logs and they may not be using syslog daemon at all to log their message. Such as /appdir/log/error.log. I ran across many posts on the internet; most suggest using rsyslog or syslog-ng. Well so far I have been able to redirect the standard system logs not the application logs. I am using centos 5/6 environment.

  Read the article

• My ubuntu server is losing connectivity, require assistance troubleshooting

  - by Coderama

  I have two server monitoring tools that check the uptime of my Ubuntu 10.04.1 LTS server. Over the last month both of these tools have reported the following outages: Jan - 15mins: self recovery Jan - 5 mins: self recovery Feb - 15mins: I managed to be online when this happened and logged into my control panel to find that my server was shutdown. I manually restarted it only because I was online. I wonder if it would have restarted? I have contacted my VPS provider (webbynode) who could not see any any problems with their VPS infrastructure for the February outage. I have also checked the following log files to see if there are any anomalies that could be the cause of the outages; I am unable to see anything related to the server shutdown (Feb) in these logs: /var/log/auth.log /var/log/apache2/error.log /var/log/syslog /var/log/kern.log /var/log/boot /var/log/messages Could anyone suggest any other things I should look out for, such as additional system logs? I just added bootlogging through /etc/default/bootlogd

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >