Search Results

Search found 11961 results on 479 pages for 'boot arguments'.

Page 375/479 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• How to check the OS is running on bare metal and not in virtualized environment created by BIOS?

  - by Arkadi Shishlov

  Is there any software available as a Linux, *BSD, or Windows program or boot-image to check (or guess with good probability) the environment an operating system is loaded onto is genuine bare metal and not already virtualized? Given recent information from various sources, including supposed to be E.Snowden leaks, I'm curious about the security of my PC-s, even about those that don't have on-board BMC. How it could be possible and why? See for example Blue Pill, and a number of papers. With a little assistance from network card firmware, which is also loadable on popular card models, such hypervisor could easily spy on me resulting in PGP, Tor, etc. exercises futile.

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• How do I change the console resolution of Ubuntu 9.10 Server running on VMWare?

  - by Raam Dev

  I'm running Ubuntu 9.10 Server in VMWare Fusion (on a Mac) and I'm having trouble changing the console resolution. It seems to be stuck on 640x480. Ubuntu 9.10 uses Grub2, so there is no /etc/grub/menu.lst. I tried adding vga=791 to the kernel parameters (both during boot and by adding it to GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub and then running update-grub2) and neither had any effect. When using vga=791, grub says that vga=791 is depreciated and that I should use gfxpayload=1024x768x16,1024x768 instead. However, that also does absolutely nothing. I have a feeling this problem is specific to running Ubuntu 9.10 in VMWare, but Google hasn't turned up anything.

  Read the article

• X server not starting up after new kernel compilation

  - by tech_learner

  I have compiled the Kernel on my 64-bit Debian XPS Studio 1340 Dell system. srikanth@debian:~ - 05:40:52 PM - $ uname -a Linux debian 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012 x86_64 GNU/Linux Kernel version that I have used and compiled from kernel.org is 2.6.35.13 I have nvidia installed on old kernel. I got the old config and I used the same config to compile the new kernel. Everything went well and I got two debian packages ( image and headers ) which I have installed on my system. When I select the new kernel on the boot menu and I go into it, the X server is not starting up possibly because I have to "rebuild" ( not sure how to do that ) according to this link: http://www.linuxquestions.org/questions/slackware-14/x-server-not-starting-after-kernel-compilation-605265/ Can you suggest how to do the rebuild on nvidia module so that I can start x ( without seeing any blank screen or error saying nvidia module is missing ) ? PS: The link that I have used to compile the kernel is https://help.ubuntu.com/community/Kernel/Compile#Alternate_Build_Method:_The_Old-Fashioned_Debian_Way

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Cannot read/write a second drive in MBP 13

  - by Carlos

  I changed my original HDD for a SDD earlier this year and I just got one more SSD for my MBP 13 (2012) that I used to replace DVD drive. I'm using Mountain Lion. The SSD looks to be recognized allright, but I can't format it. Then I removed the main drive and tried the new one as the main drive and did the boot using a USB drive with MAC OS and everyhing worked as it should (like I just had one drive). However when I bring the first drive back together with the second they both show up but I can't use it. Seems like I have no permission, but when I look at it's properties it says I can read and write to it. Any ideas? Thanks a lot!

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Dell Inspiron 1501 battery no longer "recognized"

  - by mwalling

  My parents were on vacation last weekend and franticly called me saying that they couldn't get their Inspiron 1501 to boot anymore without the BIOS whining about the battery. Before this happened, they said the "battery went dead with negligible pre-warning". On bootup, the computer says: WARNING: The battery cannot be identified. This system will be unable to charge this battery. With options to enter the BIOS or continue booting. I got to look at the machine last night. The battery still holds a charge, and will recharge. Windows detects it as a DellPY9617 battery manufactured by "DynaPack". I didn't get the BIOS revision, but the machine's ship date was 7/21/2007. The recommendations I could find on the internet varied from "discharge the battery completely" to "your computer is too old" to "update the BIOS", and wanted a more specific answer before doing something drastic.

  Read the article

• Connecte RemoteApp to Exising Session

  - by Fowl

  Due to the slightly retardedness of an app I've got to run, I've got a server auto logging in on boot with the app on auto start. Remote desktop at my leisure to check on its status, etc. Gross, but it works. Now I've tried out RemoteApp which seems to work ok (ie. remotes the notification icon, balloons...) except for the fact that it creates a new session (and therefore instance of my app) - this confuses the heck out of app and it means that if I was using 'full' remote desktop I lose all my state. "Restrict each user to a single session" doesn't work. IIRC "Windows XP Mode" uses RemoteApp and it doesn't seem to have any trouble switching between modes. So how can I connect to a running app?

  Read the article

• Remote viewing on a Linux server?

  - by Zeno

  I have a Slackware Linux server that doesn't have a monitor. It doesn't run any GUIs. Is there a way to remotely access the screen? I always use SSH, but there are times where the SSH services fails and I can't do anything (nor even tell what the problem is). I use Teamviewer from my Windows computer to other PCs, but is there anything I can use to remotely view this from a Windows machine? I also want to see what it's doing at boot, before the SSH service starts.

  Read the article

• migrating storage to a different controller

  - by bellocarico

  Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• How to mount a iSCSI/SAN storage drive to a stable device name (one that can't change on re-connect)?

  - by jcalfee314

  We need stable device paths for our Twinstrata SAN drives. Many guides for setting up iSCSI connectors simply say to use a device path like /dev/sda or /dev/sdb. This is far from correct, I doubt that any setup exists that would be happy to have its device name suddenly change (from /dev/sda to /dev/sdb for example). The fix I found was to install multipath and start a multipathd on boot which then provides a stable mapping between the storage's WWID to a device path like this /dev/mapper/firebird_database. This is a method described in the CentOS/RedHat here: http://www.centos.org/docs/5/html/5.1/DM_Multipath/setup_procedure.html. This seems a little complicated though. We noticed that it is common to see UUIDs appear in fstab on new installs. So, the question is, why do we need an external program (multipathd) running to provide a stable device mount? Should there be a way to provide the WWID directly in /etc/fstab?

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• My computer won't go into standby or hibernate

  - by Thomas B.

  Hi. I have a problem that I first noticed yesterday. Whenever I would press the half moon standby button on my keyboard, my computer would go to sleep. I also have a shortcut on my desktop configured to put my computer into hibernate. But now whenever I try to put my pc in sleep or hibernate mode, my monitor goes black for a few seconds but then comes back on at the login screen. I haven't installed or changed anything other than create a couple logical partitions in the hfs+ filesystem. (still in the process of trying to triple-boot) Any help would be great, but for now I'm going to bed. Will check back in the morning.

  Read the article

• How to fix Ubuntu 10.10 black screen from terminal?

  - by none

  I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks). I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots. So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

  Read the article

• if a usb pen drive has 64349 cylinders, is it damaged?

  - by Andrew S

  I have a 4Gb USB pen drive that I'm trying to format with FAT32. When I run fdisk, it gives me this message: The number of cylinders for this disk is set to 64349. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) I've tried deleting the partition table, creating new partitions, etc, but they never work. Sometimes I can write to the drive the first time I use it after formatting it, but then it becomes read-only in both Windows and Linux. I've tried this on multiple computers. Am I doing something wrong, or is the drive reporting an incorrect number of cylinders? Is the drive itself likely to be corrupted, and is there anyway to fix this under Windows Vista or Linux? Thanks

  Read the article

• Computer hanged in the middle of bios flashing process

  - by Stalker

  I have a laptop: Toshiba Satellite c660-17j, today I decided to update BIOS. I've downloaded bios updater from manufacturer's web site, and in the middle of flashing process computer hanged. I was waiting more than 30 minutes, but nothing was changed on the screen, i've tryed to PRESS MORE BUTTONS, but there were no reactions, so i've turned it off by removing battery (all other methods failed, even pressing power button for ~10 secs). After that computer can't start. I understand, that there's MESS in BIOS chip, and it's possible to re-flash it with hardware programmer, but I don't have it. I remember, that on some PCs (even on my eeepc) there was possibility to re-flash bios by inserting usb flash-disk (with .dat file on it, which contained BIOS), and power on PC, while holding some keys combination, then PC was switching to BIOS programming mode and re-flashed BIOS, after that it was possible to boot up normaly. Is there a way to recover computer without hardware programming BIOS chip? p.s. sorry for my english.

  Read the article

• Reset my windows server 2003

  - by Tim Thoirp

  I was recently given an HP Proliant Server from a friend as a gift. It has Windows Server 2003 installed on it. When I go to boot the system however to log in to Windows Server 2003 it requires an Admin password. I can't figure out the password and my friend doesn't know it either as it has been years since hes used the machine. I don't care about any of the data on the machine I just want to have a new clean version of Windows server 2003 running on it. Any advice would be helpful? And no I don't want to pay for a password cracking tool. Thanks

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• Small footprint on a Laptop

  - by sqldebacle

  I am trying to find a solution where I can do the following: 1) Run a small footprint on my laptop 2) Run virtual instances of OS w/ no primary OS installed. All the OS that I will ever use will be all virtualized. I tried playing around with the VMware Esxi, and got it to boot it from the flash drive, etc. But this just runs the server. I cannot actually run my virtual instances from there. Anyone has done this? Something similar implemented with VMWare products without needing 2 computers will be great. Thanks, -Subhash

  Read the article

• VMWare - Windows XP guest licensing

  - by jcooper

  Hi, If I have a VMWare ESXi server with 4 Windows XP guests running on it, I understand that I need a separate license for each guest. Is there a way to simplify license compliance on these VMs? For example, I want to create a master VM image and boot it 4 times. By default those 4 VMs will have the same Windows activation key installed. Is there a simple solution for this? Or is it ok to do what I've described above provided I have 4 unique license keys on hand in case of audit? thanks!

  Read the article

• Wireless performance on Ubuntu 9.10

  - by Brian

  Is there something I should do to my networking configuration in Ubuntu to better the performance of my wireless connection? I'm on a netbook dual-booting Windows 7 and Ubuntu 9.10. I pick up much stronger wifi signal when in Windows than Ubuntu. As soon as I boot Ubuntu, it will connect to the network with a stronger signal, and then loses signal very quickly. After it dies, I can't reconnect. I've tested this on a couple of different networks with the same outcome.

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >