Search Results

Search found 73994 results on 2960 pages for 'computer help'.

Page 371/2960 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Problems with Maverick upgrade

  - by altenuta

  I upgraded to Maverick 10.10 from Lucid. I have an old Toshiba Satellite with a 1.1 MHz and 256MB RAM. Initially I couldn't get my wireless to work. That solved itself after installing various updates and programs. The problems that remain are: I have to authorize at least 2 times at start-up. This machine is Ubuntu only. No boot load screen. I have a ton of programs and system directories that are in my home folder. Is this normal? It is difficult to wake the computer from sleep. Usually I just shut it down and restart. Tonight I waited and got a message about corrupt memory. The computer takes forever to do just about everything. Slow to start programs or doing things on the web. I am a longtime Mac user (since 1986). I also manage a network of several windoze machines. I am definitely a GUI guy and do very little in the terminal so I really need to know where to begin to get things straightened out. Can I rescue this machine without wiping it and doing a fresh install? This is basically a hobby machine. Aside from all the programs and upgrades I've installed, I have almost no files or documents to worry about saving. Anyone have any ideas about the problems I'm having and the best way to proceed? Thanks, Al

  Read the article

• Firmware/driver for Broadcom wifi card, PowerBook G4 running Ubuntu 12.04 [duplicate]

  - by user107831

  This question already has an answer here: How to Install Broadcom Wireless Drivers 40 answers This is my first time working with Ubuntu (or Linux), so please be patient. I am running Ubuntu 12.04-powerpc "Precise Pangolin" on a Mac PowerBook G4 with 1.67GHz processor. The firmware/driver for the wifi card is missing. For reasons not worth explaining, I cannot physically plug the computer into the network. I have another computer, a MacBook Pro running OSX, from which I can download files and port them by USB thumb drive. The wifi card in the PowerBook G4 is by Broadcom. The chip is BCM4306, rev. 3. The PCI number is 14e4:4302. I have downloaded b43-fwcutter_015-14_powerpc.deb and dropped it into the Home folder on the Ubuntu machine. However, it will not install. When I double-click, it opens with Ubuntu SoftwareCenter, but the "Install" button is inactive: I can't click it. There's a message beside the inactive button saying, "An older version of 'b43-fwcutter' is available in your normal software channels. Only install this file if you trust the origin." If I "right-click" the .deb file and open with Archive Manager, it shows me the "DEBIAN" and "usr" folders, but I'm unsure what to do from there...and fairly certain this is not the right way to do things. Maybe I have the wrong version of b43-fwcutter for my machine/version of Ubuntu? The documentation for this problem is a mess. It refers to all sorts of out-of-date Ubuntu versions and to an array of different "cutter" and firmware files. Maybe I'd be able to figure this out if I were a more seasoned Ubuntu user, but I have no idea why Sofware Center won't let me do the install. I would be VERY grateful for an explanation of how to get the wifi card working on this machine again. Thank you!

  Read the article

• Windows xp : possible virus

  - by dotnet-practitioner

  I think my son downloaded some thing from internet and possibly infect the computer. The Google chrome browser will not start any more and after an hour of using computer he gets some sort of blue screen saying that memory is being dumped. I don't want to format the hdd and reinstall at this time. Can I salvage the machine by some anti virus? Questions: 1. How do I detect what kind of virus do I have? 2. What kind of free anti virus software do I download to fix this problem? Thanks

  Read the article

• Hyper-V management remotely

  - by Péter

  I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

  Read the article

• How will my Electronic Engineering degree be received in the Canadian Game Development market? [closed]

  - by Harikawashi

  I have a Electronic Engineering with Computer Science Degree from a reputable South African university. The EE with CS degree is basically Electronic Engineering, with some of the high voltage subjects thrown out and replaced with computer science subjects - mostly quite theoretical, but not in too much depth. I went on to earn a Masters Degree in Digital Signal Processing, focussing on Speech Recognition in Educational Applications. I have always loved programming - I taught myself QBASIC when I was in primary school, I learned Java at school, did some low level C at University, and taught myself C# and Python while doing my post graduate degree. C# is currently my strong suit, I think I am pretty capable with it. I have two years work experience in Namibia - working as a consulting electrical engineer (no software content whatsoever) and also developing C# desktop applications for the company I work for. I would like to move to Canada next year and work in the Game Development Industry as programmer or software engineer. My interests in particular are towards the more mathematical applications, like game and physics engines, or statistical disciplines like artificial intelligence. However, these are passions - not areas in which I have any work experience. So the question: How well will my BEngEE&CS and MScEng be received in the game industry? Seeing as it's not a pure software degree and I have no official software development work experience?

  Read the article

• Scheme vs Haskell for an Introduction to Functional Programming?

  - by haziz

  I am comfortable with programming in C and C#, and will explore C++ in the future. I may be interested in exploring functional programming as a different programming paradigm. I am doing this for fun, my job does not involve computer programming, and am somewhat inspired by the use of functional programming, taught fairly early, in computer science courses in college. Lambda calculus is certainly beyond my mathematical abilities, but I think I can handle functional programming. Which of Haskell or Scheme would serve as a good intro to functional programming? I use emacs as my text editor and would like to be able to configure it more easily in the future which would entail learning Emacs Lisp. My understanding, however, is that Emacs Lisp is fairly different from Scheme and is also more procedural as opposed to functional. I would likely be using "The Little Schemer" book, which I have already bought, if I pursue Scheme (seems to me a little weird from my limited leafing through it). Or would use the "Learn You a Haskell for Great Good" if I pursue Haskell. I would also watch the Intro to Haskell videos by Dr Erik Meijer on Channel 9. Any suggestions, feedback or input appreciated. Thanks. P.S. BTW I also have access to F# since I have Visual Studio 2010 which I use for C# development, but I don't think that should be my main criteria for selecting a language.

  Read the article

• How to retain secondary hard drive mounts at reboot and keep shares?

  - by Tom

  I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

  Read the article

• Best Performing Remote Desktop Software for WAN

  - by Dave

  I've been tasked with connecting a computer in one of our branches in the midlands to one in south wales. We have been using windows remote desktop but find it too slow. The ADSL on the computer were connecting to is about 6Mb Download and 470Kb Upload so not majorly fast. That connection is also shared with about 10 other internet users. I'm trying to find out if the is any remote desktopn connecting software that performs better than the microsoft remote desktop software. Or, would i be better using a KVM over IP? I've looked into connecting the offices through BT's fiber optic but at £21k a year rental were trying to find a cheaper solution! Any help would be great. Thanks, Dave,

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• OpenVPN to connect remote networks, peer to peer instead of client/server possible?

  - by John Robertson

  I would like to connect two remote networks using OpenVPN. I am very new to this we are very small and don't have a sys/network admin. What are the possible setups to have both networks both live on a common LAN via OpenVPN? I would prefer to use the UDP peer model rather than client/server. Is there a way to set that up instead? I can't see how because no computer on existing network A has a routable address to any computer on existing network B and vice versa.

  Read the article

• Port 53 UDP Outgoing flood

  - by DanSpd

  Hello I am experiencing very huge problem. I have 4 computers in network, and from each a lot of data is being sent to ISP name servers. Sometimes data is being sent a little from each computer in network, sometimes it is just a lot of data from one computer. I have antivirus (Avast) and malware scan (SpyBot) I know port 53 UDP is dns which resolves domain IP so its' needed. Also I have read that ISP name server might have been infected. So what is the best thing to do in this situation. Also sometimes internet starts to lag really because of port 53

  Read the article

• How does operating system software maintains time clocks?

  - by Neeraj

  Hi everyone, This may sound a bit less relevant but I couldn't think of a better place to ask this question. Now consider this situation, you install an OS on your system, set the timezone and time, do some stuff and turn it off. (Note that there is no power going in to the computer). Now next time (say after some hours or days) you turn it on again, and you see the updated time. How is this possible even when my computer is not connected to the internet and was consuming no power during the period it was down.(Is there some kind of hardware hack?) please clarify!

  Read the article

• Gedit embeded terminal showing both background and foreground in white color

  - by newuser

  I am using Ubuntu 12.04.I am using Gedit with one of the plugin called Embeded Terminal which is used to place the terminal attached at the bottom part of the Gedit.Now my problem is in that embeded terminal both the screen background and text is in white color,so its difficult to see any text there.I tried to configure the fonts in dconf editor.But there was not any good result.Here I am attaching the screenshot of the configuration of dconf editor that I have changed.So please help me to solve this.Any help will be highly appreciable.

  Read the article

• How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

  - by torbengb

  I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

  Read the article

• How to install Ubuntu in Dell XPS 17?

  - by Cybercore

  I am a bit of a noob when it comes to Linux. I have a basic understanding but struggle with the more complex things. I am using a Dell XPS 17 (L207X) which has a core i7 processor and Nvidia GT555M hybrid card and cannot get a successful installation of any Ubuntu distro from 11.Xx upwards. Could anyone offer any help / advice / step by step instructions to help me get a successful installation of at least 11.10 as that is the distro I was using on my old laptop?

  Read the article

• Adding MX records to DNS

  - by Teddy

  Let's say I have a computer A which is running postfix, computer B is running tinydns. On domain project.domain.com I'm running httpd server and other server with DNS (tinydns) have entries like =project.domain.com:1.2.3.4:86400 and +project.domain.com:1.2.3.4:86400 where 1.2.3.4 is correct addres for server which runs httpd server. I also have a postfix mail server on 1.2.3.5 which I'd like to work with this domain (project.domain.com). I'm afraid that if I add another alias like +project.domain.com:1.2.3.5:86400 to tinydns configuration - it could break. How that entry should look like? Thank you for any hints.

  Read the article

• GRUB Error after Deleting Linux Partition

  - by Nironan12

  I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Shooter in iOS and a visible Aim line before shooting

  - by London2423

  I have to questions. I am trying to develop a game that is iOS but I did it first in my computer so I can tested there. I was able to must of it for PC but I am having a very hard time with iOS port The problem I do have is that I don't know how to shout in iOS. To be more specific how to line render in iOS This is the script I use in my computer using UnityEngine; using System.Collections; public class NewBehaviourScript : MonoBehaviour { LineRenderer line; void Start () { line = gameObject.GetComponent<LineRenderer>(); line.enabled = false; } void Update () { if (Input.GetButtonDown ("Fire1")) { StopCoroutine ("FireLaser"); StartCoroutine ("FireLaser"); } } IEnumerator FireLaser () { line.enabled = true; while (Input.GetButton("Fire1")) { Ray ray = new Ray(transform.position, transform.forward); RaycastHit hit; line.SetPosition (0, ray.origin); if (Physics.Raycast (ray, out hit,100)) { line.SetPosition(1,hit.point); if (hit.rigidbody) { hit.rigidbody.AddForceAtPosition(transform.forward * 5, hit.point); } } else line.SetPosition (1, ray.GetPoint (100)); yield return null; } line.enabled = false; { } } } Which part I have to change for iOS? I already did in the iOS the touch giu event so my player move around in the xcode/Iphone but I need some help with the shouting part. The second part of the question is where I do have to insert or change the script in order to first aim and I DO see the line of aim and then shout. Now the player can only shout. It can not aim at the gameobject, see the the line coming out of the gun aiming at the object and then shout? How I can do that. Everyone tell me Line render but that's what i did Thank you

  Read the article

• HDMI not detected Ubuntu 12.10 - ATI Radeon HD 6670

  - by Keith Wilson

  Brand new to Linux, so help a young blood out :-) (I'm a novice/hobby programmer, but completely new to Linux command syntax, etc) Brand new everything Rig. Fresh install of Ubuntu 12.10. Ubuntu installed everything and updates. I am getting VGA output and sound through standard sound port on mb. However the HDMI port on the radeon card is not recognized and not available. Any help getting this detected and usable?

  Read the article

• Security of BitLocker with no PIN from WinPE?

  - by Scott Bussinger

  Say you have a computer with the system drive encrypted by BitLocker and you're not using a PIN so the computer will boot up unattended. What happens if an attacker boots the system up into the Windows Preinstallation Environment? Will they have access to the encrypted drive? Does it change if you have a TPM vs. using only a USB startup key? What I'm trying to determine is whether the TPM / USB startup key is usable without booting from the original operating system. In other words, if you're using a USB startup key and the machine is rebooted normally then the data would still be protected unless an attacker was able to log in. But what if the hacker just boots the server into a Windows Preinstallation Environment with the USB startup key plugged in? Would they then have access to the data? Or would that require the recovery key? Ideally the recovery key would be required when booted like this, but I haven't seen this documented anywhere.

  Read the article

• How do you motivate peers to become better developers?

  - by Brian Rasmussen

  In my experience there seems to be two kinds of developers (if we simplify matters a great deal of course). On the one hand we have the developers, who may do a perfectly acceptable job, but who do not really care about the computer science part of their craft. They usually know few languages / technologies and are happy to let things stay that way. For whatever reason, they don't try to improve their computer science skills unless this is required in their current position. On the other hand, we have the geeks or the pragmatic programmers if you subscribe to that idea. They play around with other languages and technologies and usually have knowledge about several topics outside the technical domain of their current job. I would like to see more developers, who are enthusiastic about software development. If you share this point of view, what do you do to push your peers in that direction? Edit: follow-up question inspired by one of the answers: As non-managers, should we really care about this? And why/why not?

  Read the article

• Upgrade to ubuntu 13.04 from 12.04 with iso image

  - by Digvijay Yadav

  I have ubuntu 12.04 installed on my system. I want to upgrade it to ubuntu 13.04. I want to do this upgrade using an iso image of ubuntu 13.04. I tried this Solution But it didn't work for me. After running these command I didn't get any alerts about updating. Also I don't understand the gksu part of the solution. Here are the steps I tried: sudo mount -t iso9660 -o loop PATH/TO/ISO /cdrom then sudo /cdrom/cdromupgrade Read more: http://linuxpoison.blogspot.tw/2011/06/how-to-upgrade-ubuntu-using-alternate.html#ixzz2SFMqlOPx I also wanted to know, If I can do this using a networked computer. By this I mean the iso file is on some other computer. Thank you.

  Read the article

• How can I run my mobile phone applications on my conputer?

  - by Ehsan Mamakani

  Is it possible to run mobile apps on computer?

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >