Search Results

Search found 51164 results on 2047 pages for 'oracle access manager'.

Page 371/2047 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Spring Transaction Manager

  - by cedric

  Hi. I have a j2ee application running on spring framework. I am implementing a transaction manager with AOP. It works fine. When an exception occurs in my method it is detected by my AOP configuration and rolls back the changes in the DB. But the problem is the code where you expect the error should not be surrounded with try-catch. When I suround it with try-catch it won't roll-back. But I need to do some stuffs like logging whenever there are errors and the only place I can think of placing it is in the catch block.

  Read the article

• Replacing compiz/metacity with openbox reduces workspaces to 1

  - by Brian

  I like to use the GNOME desktop, but I prefer to replace its window manager with openbox, with 4 workspaces. However, when I run openbox --replace, the number of workspaces available drops to 1. If I go into obconf, workspaces is still configured to be 4 (~/.config/openbox/rc.xml shows the same). I can get the workspaces to reappear by changing the value in obconf to anything else, and then back to 4. I have just been dealing with this problem since Ubuntu 9.04 (now up to 10.10) since I don't reboot very often. But it's really annoying to have to reset my workspaces whenever I do have to reboot. Changing the value in rc.xml and running openbox --reconfigure does not seem to have any effect. So what is obconf doing that I'm not (sends a dbus message perhaps [EDIT: watching with dbus-monitor I see no messages when changing the workspaces value in obconf])? I was hoping there would be a cleaner way to change the window manager than just running openbox --replace at login. So my questions are: Is there a better way to specify an alternate window manager (i.e. a way that doesn't cause the workspaces to break)? If not, how can I automatically set the number of workspaces back to 4? Update: I finally got around to trying what I commented on MrShunz's answer (adding WINDOW_MANAGER=/usr/bin/openbox to ~/.gnomerc). But the effect is the same as openbox --replace.

  Read the article

• installing glassfish on ubuntu karmic using synaptics package manager

  - by Danny

  I'm trying to learn to use glassfish for the first time. My IDE is netbeans and I've installed the glassfish plugin for netbeans. I opened up synaptics package manager and typed in glassfish. My choices were imqv2 glassfish-activaton glassfish-mail glassfish-appserv glassfish-toplink-essentials glassfish-jmac-api glassfish-javaee I'm not sure what is in each package, or which package are needed. I can't seem to find anything that tells me anything descriptive about these packages. I've seen a lot of tutorials on how to install glassfish, but I'd prefer to use apt-get / synaptics to install glassfish so that syntactics can take care of updating.

  Read the article

• Memory consumption of resource manager

  - by Quang Anh

  I'm writing a resource manager, which is required to be fast and has small memory foot-print. For example, I have an resource class class Abc { string m_name; string m_path; string handle; void SomeFunctions(); } And so on. Now I create and List and add 5000 items to it. How much memory will it consume? One more question: Can I find items base on handle number only, which is the int part of the Tuple?

  Read the article

• Asp.net Script manager conflicting with button

  - by DJPB

  Hi there. I'm working on an asp.net app and I have some controls that are created dinamically on the OnInit event. One of that controls is an asp button that has been working fine until now. When I add a ScriptManager to my page, that same button is unnable to postback. It's only working if a take the ScriptManager out. has anything like this ever appened to somebody else? Am I invalidating the page somehow? Tks ps: this is my scrip manager tag: <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePageMethods="true" EnableScriptGlobalization="true" EnableScriptLocalization="true"> </asp:ScriptManager> //My Dynamic Button: Button button1 = new Button { ID = "button1", Text = "Ok" }; button1.Click += new EventHandler(Button1_Click);

  Read the article

• Windows 7 caches FTP credentials?

  - by Martin Booka Weser

  On my remote maschine i have an iis 7.5 (win server 2008) and set up an ftp site with iis manager authentication. I then did active directory user isolation and isolated my users to physical folders according to their names. So far, so good. I can access with ftp cliens from everywhere with different test accounts that i previously set up in the iis manager auth. Every user connects to its own folder. When i now tested with windows 7 as a client i did the following. Explorer - computer - right click - add network address - the ip of my remote maschine - user1 - password1 Perfect - it works. I now want to connect with user2. So I deleted this network address and set up a new connection, but with user2 (or even anonymous) instead. Now the strange thing: Windows doesn't even ask me for a password again. It just connects me to the folder of the user1. I already disabled ftp caching in the IIS and i disabled the user1 account in IIS manager authentication! Still, if i set up a network connection with this windows 7 it connects to the folder user1 . No matter which username i use (anonymous, administrator, user2,...). And if i connect with other ftp clients or other computers it all works perfectly. So I assume that this one windows somehow caches the credentials... But then, why does the IIS still accepts this credentials even if i disabled this user1 account??? Thanks.

  Read the article

• Insufficient memory to continue the execution of the program

  - by Suman

  My Application (Vb.net, Access 2003/2007) is to scan Access Database files for activex controls and to generate report accordingly. Problem: Getting an error like: "Insufficient memory to continue the execution of the program." The above error occurs while scanning for older version of Access files like prior to office 2000. And the line of code where I get this is as follows: Dim oForm As Access.Form Dim oAccess as Access.Application oForm = oAccess.Forms(objForms.Name) But it opens the file and form as well. Need Help: Whether it is possible to read the file (Access Forms and Reports) or not? Please provide me reference or any solution.

  Read the article

• How do I hook all http get requests and distinguish downloaded (by standard download manager) files

  - by Ivan

  I want to write a Firefox add-on for advanced history tracking and bookmarking which will send URLs the browser meets during usage (and all the metadata available about the context) to a web service which will keep track of them storing in an SQL database for further access and analysis. I'd like to divide URLs tracked into 5 groups: those I explicitly click to bookmark, those I download by Firefox standard built-in download manager, all other URLs accessed, all URLs met on all viewed pages as hrefs, all other URLs mentioned in HTML sources of all viewed pages. Any ideas of how to get those in an extension?

  Read the article

• How to retrieve path for a file embedded in Resources (Resource Manager)

  - by curiousone

  I am trying to retrieve file path for a html file that is embedded in resource (resx file) in VS2008 C# project. I want to give path of this file to native webbrowser control (PIEHtml) to be able to navigate (DTM_NAVIGATE) in my application. I know I can pass the string to this control using DTM_ADDTEXTW but since html text size is so big, I dont want to pass string to the control. I need to somehow extract the file path for this html file embedded inside resource manager. I tried using but this does not give the file path of html inside assembly: private ResourceManager resManager = new ResourceManager("AppName.FolderName.FileName", System.Reflection.Assembly.GetExecutingAssembly()); this.lbl.Text = resManager.GetString("StringInResources"); and also read Retrieving Resources in Satellite Assemblies but it did not solve my problem. Can somebody please provide info as to how to achieve this ?

  Read the article

• Download manager for joomla

  - by anwar

  hi there everyone i have a question on joomla, i have made a site using joomla and in my site on the left navigation part there is my items and packages and on that left nav under that i want a download manager where the visitors can download all the case studys,wallpapers,questionnaires,showreels etc.. which iam having on my site and also on the left nav part i want a ip based messages like if any user from france enters the site it should say "welcome to our friends of France" so i want to know is there any specific component for doing all this or just need the inputs from u all on how to do all this through joomla and what will b the logic and it will b helpful u guys have any ideas about doing this in a different way. thanks a lot in advance...

  Read the article

• OIM 11g notification framework

  - by Rajesh G Kumar

  OIM 11g has introduced an improved and template based Notifications framework. New release has removed the limitation of sending text based emails (out-of-the-box emails) and enhanced to support html features. New release provides in-built out-of-the-box templates for events like 'Reset Password', 'Create User Self Service' , ‘User Deleted' etc. Also provides new APIs to support custom templates to send notifications out of OIM. OIM notification framework supports notification mechanism based on events, notification templates and template resolver. They are defined as follows: Ø Events are defined as XML file and imported as part of MDS database in order to make notification event available for use. Ø Notification templates are created using OIM advance administration console. The template contains the text and the substitution 'variables' which will be replaced with the data provided by the template resolver. Templates support internationalization and can be defined as HTML or in form of simple text. Ø Template resolver is a Java class that is responsible to provide attributes and data to be used at runtime and design time. It must be deployed following the OIM plug-in framework. Resolver data provided at design time is to be used by end user to design notification template with available entity variables and it also provides data at runtime to replace the designed variable with value to be displayed to recipients. Steps to define custom notifications in OIM 11g are: Steps# Steps 1. Define the Notification Event 2. Create the Custom Template Resolver class 3. Create Template with notification contents to be sent to recipients 4. Create Event triggering spots in OIM 1. Notification Event metadata The Notification Event is defined as XML file which need to be imported into MDS database. An event file must be compliant with the schema defined by the notification engine, which is NotificationEvent.xsd. The event file contains basic information about the event.XSD location in MDS database: “/metadata/iam-features-notification/NotificationEvent.xsd”Schema file can be viewed by exporting file from MDS using weblogicExportMetadata.sh script.Sample Notification event metadata definition: 1: <?xml version="1.0" encoding="UTF-8"?> 2: <Events xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xsi:noNamespaceSchemaLocation="../../../metadata/NotificationEvent.xsd"> 3: <EventType name="Sample Notification"> 4: <StaticData> 5: <Attribute DataType="X2-Entity" EntityName="User" Name="Granted User"/> 6: </StaticData> 7: <Resolver class="com.iam.oim.demo.notification.DemoNotificationResolver"> 8: <Param DataType="91-Entity" EntityName="Resource" Name="ResourceInfo"/> 9: </Resolver> 10: </EventType> 11: </Events> Line# Description 1. XML file notation tag 2. Events is root tag 3. EventType tag is to declare a unique event name which will be available for template designing 4. The StaticData element lists a set of parameters which allow user to add parameters that are not data dependent. In other words, this element defines the static data to be displayed when notification is to be configured. An example of static data is the User entity, which is not dependent on any other data and has the same set of attributes for all event instances and notification templates. Available attributes are used to be defined as substitution tokens in the template. 5. Attribute tag is child tag for StaticData to declare the entity and its data type with unique reference name. User entity is most commonly used Entity as StaticData. 6. StaticData closing tag 7. Resolver tag defines the resolver class. The Resolver class must be defined for each notification. It defines what parameters are available in the notification creation screen and how those parameters are replaced when the notification is to be sent. Resolver class resolves the data dynamically at run time and displays the attributes in the UI. 8. The Param DataType element lists a set of parameters which allow user to add parameters that are data dependent. An example of the data dependent or a dynamic entity is a resource object which user can select at run time. A notification template is to be configured for the resource object. Corresponding to the resource object field, a lookup is displayed on the UI. When a user selects the event the call goes to the Resolver class provided to fetch the fields that are displayed in the Available Data list, from which user can select the attribute to be used on the template. Param tag is child tag to declare the entity and its data type with unique reference name. 9. Resolver closing tag 10 EventType closing tag 11. Events closing tag Note: - DataType needs to be declared as “X2-Entity” for User entity and “91-Entity” for Resource or Organization entities. The dynamic entities supported for lookup are user, resource, and organization. Once notification event metadata is defined, need to be imported into MDS database. Fully qualified resolver class name need to be define for XML but do not need to load the class in OIM yet (it can be loaded later). 2. Coding the notification resolver All event owners have to provide a resolver class which would resolve the data dynamically at run time. Custom resolver class must implement the interface oracle.iam.notification.impl.NotificationEventResolver and override the implemented methods with actual implementation. It has 2 methods: S# Methods Descriptions 1. public List<NotificationAttribute> getAvailableData(String eventType, Map<String, Object> params); This API will return the list of available data variables. These variables will be available on the UI while creating/modifying the Templates and would let user select the variables so that they can be embedded as a token as part of the Messages on the template. These tokens are replaced by the value passed by the resolver class at run time. Available data is displayed in a list. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the entity name and the corresponding value for which available data is to be fetched. Sample code snippet: List<NotificationAttribute> list = new ArrayList<NotificationAttribute>(); long objKey = (Long) params.get("resource"); //Form Field details based on Resource object key HashMap<String, Object> formFieldDetail = getObjectFormName(objKey); for (Iterator<?> itrd = formFieldDetail.entrySet().iterator(); itrd.hasNext(); ) { NotificationAttribute availableData = new NotificationAttribute(); Map.Entry formDetailEntrySet = (Entry<?, ?>)itrd.next(); String fieldLabel = (String)formDetailEntrySet.getValue(); availableData.setName(fieldLabel); list.add(availableData); } return list; 2. Public HashMap<String, Object> getReplacedData(String eventType, Map<String, Object> params); This API would return the resolved value of the variables present on the template at the runtime when notification is being sent. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the base values such as usr_key, obj_key etc required by the resolver implementation to resolve the rest of the variables in the template. Sample code snippet: HashMap<String, Object> resolvedData = new HashMap<String, Object>();String firstName = getUserFirstname(params.get("usr_key"));resolvedData.put("fname", firstName); String lastName = getUserLastName(params.get("usr_key"));resolvedData.put("lname", lastname);resolvedData.put("count", "1 million");return resolvedData; This code must be deployed as per OIM 11g plug-in framework. The XML file defining the plug-in is as below: <?xml version="1.0" encoding="UTF-8"?> <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <plugins pluginpoint="oracle.iam.notification.impl.NotificationEventResolver"> <plugin pluginclass= " com.iam.oim.demo.notification.DemoNotificationResolver" version="1.0" name="Sample Notification Resolver"/> </plugins> </oimplugins> 3. Defining the template To create a notification template: Log in to the Oracle Identity Administration Click the System Management tab and then click the Notification tab From the Actions list on the left pane, select Create On the Create page, enter values for the following fields under the Template Information section: Template Name: Demo template Description Text: Demo template Under the Event Details section, perform the following: From the Available Event list, select the event for which the notification template is to be created from a list of available events. Depending on your selection, other fields are displayed in the Event Details section. Note that the template Sample Notification Event created in the previous step being used as the notification event. The contents of the Available Data drop down are based on the event XML StaticData tag, the drop down basically lists all the attributes of the entities defined in that tag. Once you select an element in the drop down, it will show up in the Selected Data text field and then you can just copy it and paste it into either the message subject or the message body fields prefixing $ symbol. Example if list has attribute like First_Name then message body will contains this as $First_Name which resolver will parse and replace it with actual value at runtime. In the Resource field, select a resource from the lookup. This is the dynamic data defined by the Param DataType element in the XML definition. Based on selected resource getAvailableData method of resolver will be called to fetch the resource object attribute detail, if method is overridden with required implementation. For current scenario, Map<String, Object> params will get populated with object key as value and key as “resource” in the map. This is the only input will be provided to resolver at design time. You need to implement the further logic to fetch the object attributes detail to populate the available Data list. List string should not have space in between, if object attributes has space for attribute name then implement logic to replace the space with ‘_’ before populating the list. Example if attribute name is “First Name” then make it “First_Name” and populate the list. Space is not supported while you try to parse and replace the token at run time with real value. Make a note that the Available Data and Selected Data are used in the substitution tokens definition only, they do not define the final data that will be sent in the notification. OIM will invoke the resolver class to get the data and make the substitutions. Under the Locale Information section, enter values in the following fields: To specify a form of encoding, select either UTF-8 or ASCII. In the Message Subject field, enter a subject for the notification. From the Type options, select the data type in which you want to send the message. You can choose between HTML and Text/Plain. In the Short Message field, enter a gist of the message in very few words. In the Long Message field, enter the message that will be sent as the notification with Available data token which need to be replaced by resolver at runtime. After you have entered the required values in all the fields, click Save. A message is displayed confirming the creation of the notification template. Click OK 4. Triggering the event A notification event can be triggered from different places in OIM. The logic behind the triggering must be coded and plugged into OIM. Examples of triggering points for notifications: Event handlers: post process notifications for specific data updates in OIM users Process tasks: to notify the users that a provisioning task was executed by OIM Scheduled tasks: to notify something related to the task The scheduled job has two parameters: Template Name: defines the notification template to be sent User Login: defines the user record that will provide the data to be sent in the notification Sample Code Snippet: public void execute(String templateName , String userId) { try { NotificationService notService = Platform.getService(NotificationService.class); NotificationEvent eventToSend=this.createNotificationEvent(templateName,userId); notService.notify(eventToSend); } catch (Exception e) { e.printStackTrace(); } } private NotificationEvent createNotificationEvent(String poTemplateName, String poUserId) { NotificationEvent event = new NotificationEvent(); String[] receiverUserIds= { poUserId }; event.setUserIds(receiverUserIds); event.setTemplateName(poTemplateName); event.setSender(null); HashMap<String, Object> templateParams = new HashMap<String, Object>(); templateParams.put("USER_LOGIN",poUserId); event.setParams(templateParams); return event; } public HashMap getAttributes() { return null; } public void setAttributes() {} }

  Read the article

• Career development as a Software Developer without becoming a manager.

  - by albertpascual

  I’m a developer, I like to write new exciting code everyday, my perfect day at work is a day that when I wake up, I know that I have to write some code that I haven’t done before or to use a new framework/language/platform that is unknown to me. The best days in the office is when a project is waiting for me to architect or write. In my 15 years in the development field, I had to in order to get a better salary to manage people, not just to lead developers, to actually manage people. Something that I found out when I get into a management position is that I’m not that good at managing people, and not afraid to say it. I do not enjoy that part of the job, the worse one, takes time away from what I really like. Leading developers and managing people are very different things. I do like teaching and leading developers in a project. Yet most people believe, and is true in most companies, the way to get a better salary is to be promoted to a manager position. In order to advance in your career you need to let go of the everyday writing code and become a supervisor or manager. This is the path for developers after they become senior developers. As you get older and your family grows, the only way to hit your salary requirements is to advance your career to become a manager and get that manager salary. That path is the common in most companies, the most intelligent companies out there, have learned that promoting good developers mean getting a crappy manager and losing a good resource. Now scratch everything I said, because as I previously stated, I don’t see myself going to the office everyday and just managing people until is time to go home. I like to spend hours working in some code to accomplish a task, learning new platforms and languages or patterns to existing languages. Being interrupted every 15 minutes by emails or people stopping by my office to resolve their problems, is not something I could enjoy. All the sudden riding my motorcycle to work one cold morning over the Redlands Canyon and listening to .NET Rocks podcast, Michael “Doc” Norton explaining how to take control of your development career without necessary going to the manager’s track. I know, I should not have headphones under my helmet when riding a motorcycle in California. His conversation with Carl Franklin and Richard Campbell was just confirming everything I have ever did with actually more details and assuring that there are other paths. His method was simple yet most of us, already do many of those steps, Mr. Michael “Doc” Norton believe that it pays off on the long run, that finally companies prefer to pay higher salaries to those developers, yet I would actually think that many companies do not see developers that way, this is not true for bigger companies. However I do believe the value of those developers increase and most of the time, changing companies could increase their salary instead of staying in the same one. In short without even trying to get into the shadow of Mr. Norton and without following the steps in the order; you should love to learn new technologies, and then teach them to other geeks. I personally have learn many technologies and I haven’t stop doing that, I am a professor at UCR where I teach ASP.NET and Silverlight. Mr Norton continues that after than, you want to be involve in the development community, user groups, online forums, open source projects. I personally talk to user groups, I’m very active in forums asking and answering questions as well as for those I got awarded the Microsoft MVP for ASP.NET. After you accomplish all those, you should also expose yourself for what you know and what you do not know, learning a new language will make you humble again as well as extremely happy. There is no better feeling that learning a new language or pattern in your daily job. If you love your job everyday and what you do, I really recommend you to follow Michael’s presentation that he kindly share it on the link below. His confirmation is a refreshing, knowing that my future is not behind a desk where the computer screen is on my right hand side instead of in front of me. Where I don’t have to spent the days filling up performance forms for people and the new platforms that I haven’t been using yet are just at my fingertips. Presentation here. http://www.slideshare.net/LeanDog/take-control-of-your-development-career-michael-doc-norton?from=share_email_logout3 Take Control of Your Development Career Welcome! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] Recovering Post Technical I love to learn I love to teach I love to work in teams I love to write code I really love to write code What about YOU? Do you love your job? Do you love your Employer? Do you love your Boss? What do you love? What do you really love? Take Control Take Control • Get Noticed • Get Together • Get Your Mojo • Get Naked • Get Schooled Get Noticed Get Noticed Know Your Business Get Noticed Get Noticed Understand Management Get Noticed Get Noticed Do Your Existing Job Get Noticed Get Noticed Make Yourself Expendable Get Together Get Together Join a User Group Get Together Help Run a User Group Get Together Start a User Group Get Your Mojo Get Your Mojo Kata Get Your Mojo Koans Get Your Mojo Breakable Toys Get Your Mojo Open Source Get Naked Get Naked Run with Group A Get Naked Do Something Different Get Naked Own Your Mistakes Get Naked Admit You Don’t Know Get Schooled Get Schooled Choose a Mentor Get Schooled Attend Conferences Get Schooled Teach a New Subject Get Started Read These (Again) Take Control of Your Development Career Thank You! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] In a short summary, I recommend any developer to check his blog and more important his presentation, I haven’t been lucky enough to watch him live, I’m looking forward the day I have the opportunity. He is giving us hope in the future of developers, when I see some of my geek friends moving to position that in short years they begin to regret, I get more unsure of my future doing what I love. I would say that now is looking at the spectrum of companies that understand and appreciate developers. There are a few there, hopefully with time code sweat shops will start disappearing and being a developer will feed a family of 4. Cheers Al tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/07/career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

  Read the article

• AIX Checklist for stable obiee deployment

  - by user554629

  Common AIX configuration issues     ( last updated 27 Aug 2012 ) OBIEE is a complicated system with many moving parts and connection points.The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators. The information in this article is time sensitive, and updated as I discover new  issues or details. What makes OBIEE different? When Tech Support suggests AIX component upgrades to a stable, locked-down production AIX environment, it is common to get "push back".  "Why is this necessary?  We aren't we seeing issues with other software?"It's a fair question that I have often struggled to answer; here are the talking points: OBIEE is memory intensive.  It is the entire purpose of the software to trade memory for repetitive, more expensive database requests across a network. OBIEE is implemented in C++ and is very dependent on the C++ runtime to behave correctly. OBIEE is aggressively thread efficient;  if atomic operations on a particular architecture do not work correctly, the software crashes. OBIEE dynamically loads third-party database client libraries directly into the nqsserver process.  If the library is not thread-safe, or corrupts process memory the OBIEE crash happens in an unrelated part of the code.  These are extremely difficult bugs to find. OBIEE software uses 99% common source across multiple platforms:  Windows, Linux, AIX, Solaris and HPUX.  If a crash happens on only one platform, we begin to suspect other factors.  load intensity, system differences, configuration choices, hardware failures.  It is rare to have a single product require so many diverse technical skills.   My role in support is to understand system configurations, performance issues, and crashes.   An analyst trained in Business Analytics can't be expected to know AIX internals in the depth required to make configuration choices.  Here are some guidelines. AIX C++ Runtime must be at  version 11.1.0.4$ lslpp -L | grep xlC.aixobiee software will crash if xlC.aix.rte is downlevel;  this is not a "try it" suggestion.Nov 2011 11.1.0.4 version  is appropriate for all AIX versions ( 5, 6, 7 )Download from here:https://www-304.ibm.com/support/docview.wss?uid=swg24031426 No reboot is necessary to install, it can even be installed while applications are using the current version.Restart the apps, and they will pick up the latest version. AIX 5.3 Technology Level 12 is required when running on Power5,6,7 processorsAIX 6.1 was introduced with the newer Power chips, and we have seen no issues with 6.1 or 7.1 versions.Customers with an unstable deployment, dozens of unexplained crashes, became stable after the upgrade.If your AIX system is 5.3, the minimum TL level should be at or higher than this:$ oslevel -s  5300-12-03-1107IBM typically supports only the two latest versions of AIX ( 6.1 and 7.1, for example).  AIX 5.3 is still supported and popular running in an LPAR. obiee userid limits$ ulimit -Ha  ( hard limits )$ ulimit -a   ( default limits )core file size (blocks)     unlimiteddata seg size (kbytes)      unlimitedfile size (blocks)          unlimitedmax memory size (kbytes)    unlimitedopen files                  10240 cpu time (seconds)          unlimitedvirtual memory (kbytes)     unlimitedIt is best to establish the values in /etc/security/limitsroot user is needed to observe and modify this file.If you modify a limit, you will need to relog in to change it again.  For example,$ ulimit -c 0$ ulimit -c 2097151cannot modify limit: Operation not permitted$ ulimit -c unlimited$ ulimit -c0There are only two meaningful values for ulimit -c ; zero or unlimited.Anything else is likely to produce a truncated core file that cannot be analyzed. Deploy 32-bit or 64-bit ?Early versions of OBIEE offered 32-bit or 64-bit choice to AIX customers.The 32-bit choice was needed if a database vendor did not supply a 64-bit client library.That's no longer an issue and beginning with OBIEE 11, 32-bit code is no longer shipped.A common error that leads to "out of memory" conditions to to accept the 32-bit memory configuration choices on 64-bit deployments.  The significant configuration choices are: Maximum process data (heap) size is in an AIX environment variableLDR_CNTRL=IGNOREUNLOAD@LOADPUBLIC@PREREAD_SHLIB@MAXDATA=0x... Two thread stack sizes are made in obiee NQSConfig.INI[ SERVER ]SERVER_THREAD_STACK_SIZE = 0;DB_GATEWAY_THREAD_STACK_SIZE = 0; Sort memory in NQSConfig.INI[ GENERAL ]SORT_MEMORY_SIZE = 4 MB ;SORT_BUFFER_INCREMENT_SIZE = 256 KB ; Choosing a value for MAXDATA:0x080000000  2GB Default maximum 32-bit heap size ( 8 with 7 zeros )0x100000000  4GB 64-bit breaking even with 32-bit ( 1 with 8 zeros )0x200000000  8GB 64-bit double 32-bit max0x400000000 16GB 64-bit safetyUsing 2GB heap size for a 64-bit process will almost certainly lead to an out-of-memory situation.Registers are twice as big ... consume twice as much memory in the heap.Upgrading to a 4GB heap for a 64-bit process is just "breaking even" with 32-bit.A 32-bit process is constrained by the 32-bit virtual addressing limits.  Heap memory is used for dynamic requirements of obiee software, thread stacks for each of the configured threads, and sometimes for shared libraries. 64-bit processes are not constrained in this way;  extra heap space can be configured for safety against a query that might create a sudden requirement for excessive storage.  If the storage is not available, this query might crash the whole server and disrupt existing users.There is no performance penalty on AIX for configuring more memory than required;  extra memory can be configured for safety.  If there are no other considerations, start with 8GB.Choosing a value for Thread Stack size:zero is the value documented to select an appropriate default for thread stack size.  My preference is to change this to an absolute value, even if you intend to use the documented default;  it provides better documentation and removes the "surprise" factor.There are two thread types that can be configured. GATEWAY is used by a thread pool to call a database client library to establish a DB connection.The default size is 256KB;  many customers raise this to 512KB ( no performance penalty for over-configuring ). This value must be set to 1 MB if Teradata connections are used. SERVER threads are used to run queries.  OBIEE uses recursive algorithms during the analysis of query structures which can consume significant thread stack storage.  It's difficult to provide guidance on a value that depends on data and complexity.  The general notion is to provide more space than you think you need,  "double down" and increase the value if you run out, otherwise inspect the query to understand why it is too complex for the thread stack.  There are protections built into the software to abort a single user query that is too complex, but the algorithms don't cover all situations.256 KB  The default 32-bit stack size.  Many customers increased this to 512KB on 32-bit.  A 64-bit server is very likely to crash with this value;  the stack contains mostly register values, which are twice as big.512 KB  The documented 64-bit default.  Some early releases of obiee didn't set this correctly, resulting in 256KB stacks.1 MB  The recommended 64-bit setting.  If your system only ever uses 512KB of stack space, there is no performance penalty for using 1MB stack size.2 MB  Many large customers use this value for safety.  No performance penalty.nqscheduler does not use the NQSConfig.INI file to set thread stack size.If this process crashes because the thread stack is too small, use this to set 2MB:export OBI_BACKGROUND_STACK_SIZE=2048 Shared libraries are not (shared) When application libraries are loaded at run-time, AIX makes a decision on whether to load the libraries in a "public" memory segment.  If the filesystem library permissions do not have the "Read-Other" permission bit, AIX loads the library into private process memory with two significant side-effects:* The libraries reduce the heap storage available.      Might be significant in 32-bit processes;  irrelevant in 64-bit processes.* Library code is loaded into multiple real pages for execution;  one copy for each process.Multiple execution images is a significant issue for both 32- and 64-bit processes.The "real memory pages" saved by using public memory segments is a minor concern.  Today's machines typically have plenty of real memory.The real problem with private copies of libraries is that they consume processor cache blocks, which are limited.   The same library instructions executing in different real pages will cause memory delays as the i-cache ( instruction cache 128KB blocks) are refreshed from real memory.   Performance loss because instructions are delayed is something that is difficult to measure without access to low-level cache fault data.   The machine just appears to be running slowly for no observable reason.This is an easy problem to detect, and an easy problem to correct.Detection:  "genld -l" AIX command produces a list of the libraries used by each process and the AIX memory address where they are loaded.32-bit public segment is 13 ( "dxxxxxxx" ).   private segments are 2-a.64-bit public segment is 9 ( "9xxxxxxxxxxxxxxx") ; private segment is 8.genld -l | grep -v ' d| 9' | sort +2provides a list of privately loaded libraries. Repair: chmod o+r <libname>AIX shared libraries will have a suffix of ".so" or ".a".Another technique is to change all libraries in a selected directory to repair those that might not be currently loaded.   The usual directories that need repair are obiee code, httpd code and plugins, database client libraries and java.chmod o+r /shr/dir/*.a /shr/dir/*.so Configure your system for diagnosticsProduction systems shouldn't crash, and yet bad things happen to good software.If obiee software crashes and produces a core, you should configure your system for reliable transfer of the failing conditions to Oracle Tech Support.  Here's what we need to be able to diagnose a core file from your system.* fullcore enabled. chdev -lsys0 -a fullcore=true* core naming enabled. chcore -n on -d* ulimit must not truncate core. see item 3.* pstack.sh is used to capture core documentation.* obidoc is used to capture current AIX configuration.* snapcore  AIX utility captures core and libraries. Use the proper syntax. $ snapcore -r corename executable-fullpath   /tmp/snapcore will contain the .pax.Z output file.  It is compressed.* If cores are directed to a common directory, ensure obiee userid can write to the directory.  ( chcore -p /cores -d ; chmod 777 /cores )The filesystem must have sufficient space to hold a crashing obiee application.Use:  df -k  Check the "Free" column ( not "% Used" )  8388608 is 8GB. Disable Oracle Client Library signal handlingThe Oracle DB Client Library is frequently distributed with the sqlplus development kit.By default, the library enables a signal handler, which will document a call stack if the application crashes.   The signal handler is not needed, and definitely disruptive to obiee diagnostics.   It needs to be disabled.   sqlnet.ora is typically located at:   $ORACLE_HOME/network/admin/sqlnet.oraAdd this line at the top of the file:   DIAG_SIGHANDLER_ENABLED=FALSE Disable async query in the RPD connection pool.This might be an obiee 10.1.3.4 issue only ( still checking  )."async query" must be disabled in the connection pools.It was designed to enable query cancellation to a database, and turned out to have too many edge conditions in normal communication that produced random corruption of data and crashes.  Please ensure it is turned off in the RPD. Check AIX error report (errpt).Errors external to obiee applications can trigger crashes.  $ /bin/errpt -aHardware errors ( firmware, adapters, disks ) should be reported to IBM support.All application core files are recorded by AIX;  the most recent ones are listed first. Reserved for something important to say.

  Read the article

• Oracle BI 11g kipr&oacute;b&aacute;l&aacute;si lehetos&eacute;g a HOUG Konferenci&aacute;n, 2011. m&aacute;rcius 28.

  - by Fekete Zoltán

  A HOUG Konferencia 2011. és Oracle Enterprise Cloud Summit rendezvényre továbbra is lehet regisztrálni a www.houg.hu weboldalon. A konferencia elso napján mindenki saját kezuleg kipróbálhaja az Oracle üzleti intelligencia integrált csomagját, az Oracle Business Intelligence 11g-t. Ehhez csak egy wi-fi képes laptopra/notebookra van szükség. A BI hands-ont március 28-án hétfon 14:30-16h között tartom.

  Read the article

• Can't access public folders after upgrade to Exchange 2010

  - by Craig Putnam

  After upgrading a domain from Exchange 2003 to Exchange 2010, I cannot access the public folders from Outlook 2003 or Outlook 2007. I can access the public folders from OWA. The error message in Outlook 2003 is: Unable to display the folder. Microsoft Office Outlook could not access the specified folder location. Could not open the item. Try again. So far, trying again has not helped. :-P According to the Outlook RPC diagnostic window, Outlook is connecting to the Exchange 2010 server when it tries to get the public folders.

  Read the article

• Share folder and access this folder on different domain

  - by michel

  the following situations: i have two pc's. My work desktop with XP and logged on in domain mywork.com. This desktop also has two network card. one for logging on the mywork.com domain and using the intranet etc. this desktop also has a network card with access to a switch. the other pc is a windows 7 pc. with is logged in to workgroup domain and also access the switch. now i want to access a shared folder from XP with my 7. but this is not possible because XP is in a different domain. 7 is asked for a user and password but i can't fill in my "mywork.com" login. how can i solve this?

  Read the article

• sharepoint 2007 access denied when accessing user profiles via ssp

  - by user22215

  Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

  Read the article

• Lost Internet access in Windows XP Mode virtual pc under Windows 7

  - by kousen

  In my office, I created and configured a virtual pc in Windows XP Mode. Everything was working fine. Now I'm on the road, and my Internet access (in the host operation system) is either via a hotel wifi or through my Verizon air card. Either way, I've lost Internet access in the virtual pc. I went into the Virtual PC settings, and set the Networking value to Shared Networking (NAT). Actually, I've tried every combination I can find, but I can't get from the virtual pc to the web. I'm hoping to use the virtual box at a client site, so I really need that access. Is there anything I can do to get it back? Thanks for any help.

  Read the article

• RDP issue..RDP not working providing logon to access on user id

  - by Mohammed Najmuddin

  I got a request to provide logon to access to one of Windows 2008 server, after I added this server on user's logon to list and given local admin access to server. I am not able to take RDP session. Its giving error.. Local Security authority failed to connect... I see Event ID 56 ..Source Termdd When I given access to Windows 2003 it working fine.. I checked remote desktop security settings..its configured "Remote desktop security layer" Can somebody help to fix this issue... Regards, Mohammed Najmuddin

  Read the article

• Restrict IPMI access on Dell BMC and iDRAC to an allowed IP range

  - by edgester

  I'm trying to secure the iDRAC's and BMC's on some of my Dell servers (R210, R410, R510). I want to restrict access to IPMI commands to only a few IP addresses. I've successfully restricted access to the iDrac using the instructions from http://support.dell.com/support/edocs/software/smdrac3/idrac/idrac10mono/en/ug/html/racugc2d.htm#wp1181529 , but the IP restrictions do not affect IPMI. A separate management network is not practical at this time because of lack or ports and some Dell BMC's don't offer a separate port. I'm told by my networking group that our switches don't support trunking, so using the vlan tagging is not an option either. Is there a way restrict the IPMI access to a list of allowed addresses? FYI, for various reasons, I have a mix of Dell servers with BMC's, iDrac Express and iDrac enterprise management features.

  Read the article

• Configure Apple Mobile Access Server for iPhones, iPads and Macs

  - by Studer

  I successfully configured Mobile Access Server on Mac OS X Server 10.6, but now, how do I configure Macs, iPhones and iPads I'm in charge of ? How can these machines access all the services provided by the Mobile Access Server ? I can't find anything useful on the web concerning the client setup. Is there any '1-click configuration' that would setup iCal, Addresses and Mail at once on a machine like the MobileMe setup does ? Or do I have to manually configure each services on each machines ? I gave a look at the iPhone Configuration Utility but it cannot configure Macs, obviously.

  Read the article

• Way to access Palm Zlib DB files (.pdb) on Windows or Debian

  - by Italy Kafe

  Is anyone aware of a way to access the data in zlib database files for Palm? The file extension is .pdb, but that extension covers a whole range of formats, so a generic 'pdb viewer' won't necessarily be able to handle this. I'd like to be able to open pdb zlib database files. I'd be grateful for any access method: an app for Windows or Debian, or a library for Python or PHP that makes it possible to access the data in these files. If no such tool exists, does anyone know how to use zlib to decompress the data from such a Palm pdb database?

  Read the article

• Windows 2008 and Truecrypt: can't access shared folder called "media"

  - by Sajee

  On my Windows 2008 system, I've attached an external USB drive that's encrypted using Truecrypt. Once I mounted the Truecrypt drive, I share some of the directories from that drive using Windows file sharing. I tried sharing a folder called "media" and when I try to access that folder from a Vista client on my LAN via \myserver\media, I get this error: \myserver\media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. An unexpected network error occurred. If I share the folder media under some name such as fizzbuzz then I can access \myserver\fizzbuzz w/o any errors. Any clues as to why this is happening? Related: http://serverfault.com/questions/27684/windows-2008-and-truecrypt-how-to-automatically-mount-shared-folders-after-rest

  Read the article

• Roundcube access from outside local network

  - by Mike K

  I have setup hmailserver on a windows xp pro computer and everything is working great when it comes to getting it to send and receive email. Now here is where my problem comes in... I have setup roundcube using uniserver and everything works great internally. Now, what I am trying to do is to be able to access roundcube from the internet outside of the local network. I have opened up ports 80, 443, and the mysql port yet I am still unable to access this from outside of the network. The error message that I am getting is as followed: Forbidden You don't have permission to access /webmail/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I believe something needs to be edited in the apache config file. Any help would be greatly appreciated. I am hoping I dont need to run this on windows server but I'm kinda losing hope and thinking I will need to because I need IIS.

  Read the article

• Access internal IP using public IP

  - by willvv

  Hi, I have a DSL modem with a public IP address (201.206.x.x), and I have a web server in my internal network (192.168.0.50). I set up the modem to forward requests to port 80 to my web server, so, if I access 201.206.x.x from outside my network, it shows my web page, the same happens if I access 192.168.0.50 from a computer inside my network. Now, the problem is when I try to access 201.206.x.x from my internal network, the browser tries to connect to the DSL modem configuration, instead of redirecting my request to my Web server. Which settings do I have to change in the modem to set up this redirection? Thanks!

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >