Search Results

Search found 50994 results on 2040 pages for 'simple solution'.

Page 372/2040 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

  • OS X won't boot up unless I hold down option key

    - by Gazzer
    I have a strange issue on an early 2008 Mac Pro running OS 10.6: if I restart the computer it restarts normally if I shutdown and boot, it stops at the grey screen just before the boot process if I shutdown and boot but hold down the option key, I can select the boot disk and all is good. I've just cloned the disk, and the same thing happens. The disk is a SAMSUNG HD154UI The disk is partitioned (the second partition holds a clone of the Snow Leopard Install disk) One weird thing on the original disk was one of the partitions said 'EFI Boot' in a non-aliased font rather than the name of the disk when the disks are listed upon holding down option. Solution: it seems that there was a problem with the disk. Part of the difficulty in finding the solution was that you need to remove the disk from the computer completely. For example, a good disk in Bay 3, wouldn't boot up if the bad disk was in Bay 2. So for ages I thought the problem was hardware related in Bay 3. So if you think you have a dodgy disk remove it totally if you are testing the hardware with a 'clean' disk. Cleaning the PRAM helped to get the new disk to work too.

    Read the article

  • How can I monitor network traffic?

    - by WIndy Weather
    I have a home network with about 10 devices including BluRay player [netflix] and both windows and linux machines. I need to collect network traffic statistics so that if questions come up about how much traffic I'm using I have the answer independent of my ISP. I've looked at DD-WRT, but I see that even buying a new router that will be supported is a problem since I might get the wrong version of the hardware. I have a DIR-655 and a DIR-501 - neither of which is supported. I don't mind buying new hardware, but it looks like a crap-shoot to get one that will work. DD-WRT looks like a bad solution unless someone knows of a place to get a router that is guaranteed to work. Does someone know of an arduino or other SBC solution? I have plenty of NAT routers already, so I just need traffic statistics for external traffic. The network is GBit Ethernet inside and Cable / soon to be DSL outside. The DIR-655 only gives me "packets", not bytes transferred oddly enough. Thanks, ww

    Read the article

  • DNS forwarders limitations

    - by thejartender
    My question is very simple (maybe a tad too simple), but I will try and phrase it in a way to hopefully assist future visitors. I have just set up (successfully I hope) a DNS server at with some name server records on Ubuntu 12.10 while I am waiting for it to propagate I would like to know for future reference if I can use more than 2 forwarders in my /etc/named.conf.options.Would this speed up propagation? Do make this question and answer more valuable what other public DNS servers are available over and above Google's public DNS adresses: 8.8.8.8 8.8.4.4 I would also like to know if a restart of bind means that my servers will need to re-propagate? Is there a methodology to update settings while bind is running?

    Read the article

  • Replacement for public folder workflow, I'm confused as to how sharepoint does it.

    - by RodH257
    For years Microsoft has been slowly phasing out public folders, perhaps exchange 2010 really is the LAST TIME they'll be shipped... I've heard sharepoint is the replacement, but I don't understand full, can someone give me an idea of how to replace this workflow? In our office, we have projects, they have a project number, ie 10353. Each job folder has a public folder, organized in a hierachy like Projects Year Folder Subfolders The main subfolder we use is for genera correspondence. When an email is received that relates to a project, it is dragged and dropped (or right click move to) a public folder. Adding public folder favourites for each user helps this. When an email is sent, we have a custom email form, which is the default email form, but with a project number field next to the subject line. When you enter the job number in there, it carbon copies our filing system in, which reads the job number and puts the email in the public folder for you. if you need to refer to emails, you go to public folder and find them there. This isn't the best with large jobs, but it works ok. Now, I have limited experience with sharepoint (well, WSS), we've used it to do some neat discussion boards/polls etc as an intranet site, but I haven't seen much of its integration with outlook. The great thing about our solution is how tightly it integrates with outlook which is exactly where the emails are. If you want to forward an old email, you go to public folder and forward it, simple. Any solution that replaces it should be at least as easy as this. Improvements we would like would be to have better searching of emails, better support in exchange (ie future version) and also, custom forms in outlook are being phased out (the VBA kind), so avoiding these would be good. Does sharepoint do this? or what solutions do this kind of thing?

    Read the article

  • Unable to install DKIM and SPF on your cPanel/WHM domain. No errors but DKIM test fails

    - by user101597
    The strangest thing.. And I'm pretty sure that the solution is fairly simple.. I'm trying to install DKIM and SPF for one of my domain hosted on a dedicated server with cPanel WHM.. I'm following this tutorial (http://techinterplay.com/enabled-dkim-cpanel-server.html) but the DKIM test is unsuccessful.. Since I host the email for this domain name at Google Apps, I make the DKIM test from a simple php code by using the php mail() function What's causing the failure of the DKIM? Thanks for your help!!

    Read the article

  • How to short-circuit Eclipse AutoComplete when "by relevance" Sorting is enabled?

    - by JRtim
    I know there's a number of autocomplete articles scattered around stack and eclipse relevant communities. I haven't seen a solution that I have been able to make work. Essentially it goes like this... I like sorting by relevance (since it usually has a decent priority), but sometimes I want to short circuit the autocomplete without having to hit x 2. If I have a class that has a couple methods like, getThis(), getThat, and get(), and eclipse picks up that I usually use getThis(), but every once in a while I want the get() method. So I type "Class" "period" "get(" -- whoops eclipse just filled in getThis(). When the sorting is alphabetically, this isn't an issue, but "by relevance" is a nice default. Just wondering if I'm missing the boat on something. Obviously one solution is to increase the latency on the autocomplete popup, but get() might just be an example. There might a situation where the method I want is a few parameters and maybe more than 3 keystrokes. Thank you.

    Read the article

  • How to run programs from a different directory in unix

    - by user1067358
    I know this is a very simple question, and that many similar (but more complicated!) questions have been asked- So i wanted to ask this in a very plane manner. Sorry if this voids the rules of conduct on this website! I'm very new to using unix. I have a program that converts a ".evt" file to an .rq1, which is used for data analysis. The command to do so is simple, for example: Convert data.evt (this outputs data.rq1). This program, let's say, is located in directory /A and I have a data file that I want to convert in directory /B. How would I go about executing this program without moving the convert program to directory B?

    Read the article

  • Network Security Device/Software

    - by Campo
    We currently run Symantec Antivirus Corporate 10.2. The software is really easy to manage on a network but the actual virus detection isn't bad but the malware detection is crap. We recently were infected with a email bot that got us put on some block lists. This has been resolved. I cannot have that happen again. I would like to find a program as easy to manage as symantec that I can install on all the user's workstations as well as the servers. We run a windows 2003 domain. We have a couple 2008 test servers in the environment. Most of the workstations are xp though I am using windows 7 and symantect is not compatible with this OS... So we need a solution that would cover all those operating systems. If it could be installed on macs too that would be a bonus though not necessary at all. This software must detect: Viruses AND Malware I am looking for something that combines the features in anti-malware programs like malwarebytes or spybot with an antivirus program like symantec or AVG. Alternatively if there is a piece of hardware that is a firewall, router, and packet inspection for virus/spam that would be the most ideal solution. I then could supplement with a piece of software that could pickup what the hardware misses. Thank you for your suggestions.

    Read the article

  • One Way Sync with Dropbox?

    - by user244805
    Is there any way I can mirror a dropbox folder to my C drive by just running a portable file? Extra background information because I know you guys hate it when you don't get the entire situation: I go back to University in fall and I need a new storage solution. I decided to use DropBox to sync my tiny University files (< 5 MB). I need to access these files from 4 machines: Windows 7 Home machine Windows 7 University A machine Windows 7 University B machine Android tablet 1 and 4 are a non-issue. The problem lies with 2 and 3. I want to be able to edit my files on 2 and 3 but those machines are not mine. There is an easy fix. Run a portable version of the DropBox syncer on a USB drive. But the problem is that I don't want to carry a USB drive around with me all the time. In that case, I can just run the small portable DropBox syncer off the internet. But where will it to store the files? A temporary directory on the C drive. There is only one issue left: there are hundreds of machines that I will randomly use that fit in categories 2 and 3. My portable DropBox syncer will notice that the temporary directory is empty on each new PC I use and instead of downloading my DropBox folder to the machine, it syncs the other way around i.e. it deletes my entire DropBox. The solution is to mirror my DropBox onto the temporary directory before running the DropBox syncer.

    Read the article

  • Adjust output Brightness/Gamma/Colors in Gnome

    - by Mikee
    We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

    Read the article

  • How to remove an email which is stuck in the outbox of the Windows 8 Mail app

    - by hcl
    It's already the second time, I have an E-Mail in the outbox of the Mail-app of Windows 8 which is stuck. I don't see the exact reason why this happens (I have no big files attached to the mails and the recipient is valid). The first time I have had this problem, I have not found a simple way to remove the stucked email. I solved the Problem by removing the accounts from the mail app and then adding the same accounts newly to the app. However I'm wondering if there is a more simple way of doing this? Does someone know how to remove an email which is stuck in the outbox?

    Read the article

  • .htaccess redirect, from old dirty URL to a clean new URL with parameters

    - by JustAnil
    I have the following 2 links, I'm not great with .htaccess rules yet. Old URL: http://www.mywebsite.org.uk/donate/donate.php?charity_id=885&project_id=18111 New URL: http://new.mywebsite.org.uk/donation/to/885/18111 I want all the traffic coming from the old URL to the new url (including the parameters charity_id & project_id). I'm trying to learn .htaccess rules, but finding the tutorials online to be kinda vague. I'd really like a simple explanation on the .htaccess rules. (Give a man a fish, feed him for a day, teach a man to fish, feed him for a lifetime). The correct answer will be the answer with a simple and useful explanation (along with the rules if possible!).

    Read the article

  • Hardware for Capturing Packets

    - by Kevin
    One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

    Read the article

  • Allied Telesis router: IP filtering for the LOCAL interface

    - by syneticon-dj
    Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

    Read the article

  • Restore a database with LDF file only

    - by Martin
    First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

    Read the article

  • Changing the modified date of a message in Exchange 2010

    - by jgoldschrafe
    My organization is in the middle of a process to move their Exchange 2010 messaging system from one archiving platform to another. As part of this process, we need to restore all archived messages back into users' email accounts, and then let the new system import them again. The problem is that when the messages are dumped back, the modified date on the message is set to the date it was restored, which trips up message archiving and basically means nobody will have anything archived for six months. So you don't have to ask: no, our archiving platform only uses the modified timestamp on the message and cannot be altered to temporarily use the sent or received timestamp instead to determine whether to archive it. We and others have asked for the feature, but it doesn't exist right now. What we're looking for is a method to go through the user's mailbox and alter the modified timestamp of each message (or preferably received more than X months ago) to the received date of the message. We also don't want to spend more on this tool per user than we're spending on the archiving solution in the first place. We've run across a few tools that are something ridiculous like $25 per user. I don't think we're even paying close to that for Exchange and the archiving solution put together. Whatever we settle on should function on a live mailbox with no downtime. Playing around with PST imports and hacky little things like that isn't going to work. We're fine with programming/scripting, if anyone knows the best way through PowerShell, COM automation or some other way to best handle this.

    Read the article

  • How to (properly) back up a live QEMU/KVM VM?

    - by Roman
    I'm currently engineering a backup solution for KVM VM's as an additional measure to traditional backups. Unfortunately, all currently (August 2013) existing solutions I came across so far either: do not ensure a consistent backup of the VM (losing RAM state, creating a dirty image, or other things), or require lengthy downtime (complete VM shutdown while backing up). I'm aware of QEMU/libvirt's functionality of taking snapshots, however, it's not yet usable since: image-internal snapshots present you with an ever-changing image file, resulting in a likely dirty backup (assuming one uses qcow2 images at all). one cannot yet merge a currently active external snapshot into the original backing image ("blockcommit"). Out of the above reasons, I'm now implementing a script that: Saves the VM's state and halts it Sets up a devicemapper snapshot(s) where the VM's disk images and state reside Resumes the VM Mount the snapshot(s) of step 2. Backs up the VM's disk and state (configuration for convenience) Merges back the snapshot(s). If I got everything right, this will take consistent backups of VM's with only seconds (if at all, since 1-3 is fast, possibly sub-second) of downtime. Of course, when restoring, the VM will be way in the past, but at least giving me the option of an orderly shutdown/reboot. Am I missing something with this solution? Or has someone indeed already implemented this?

    Read the article

  • windows: force user to use specific network adapter

    - by Chad
    I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

    Read the article

  • Problem after installing node.js on Debian Lenny

    - by gmunk
    I managed to install node.js successfully on my machine but when invoking make test I get an error message: python tools/test.py --mode=release simple === release test-net-pingpong === Path: simple/test-net-pingpong server listening on 20989 localhost server listening on 20988 undefined Error: EAFNOSUPPORT, Address family not supported by protocol at net:1041:19 at dns:105:7 at EventEmitter._tickCallback (node.js:48:25) at node.js:176:9 I found out that EAFNOSUPPORT means that the OS does not support a particular protocol and a program tries to use it. So from what I can deduce my Debian does not have support for dns? Any help is appreciated!

    Read the article

  • ddwrt client brigde acces point lost

    - by llazzaro
    Ok I have an AP with ddwrt firm (i know its not the best, but continue reading!) AP is configured to work like a wifi "transparent" brigde, also it had a virtual wifi network card to expand radius of wifi signal in that same AP. The brigde is working, computers behind AP gets ips from main routers which shares internet....BUT! I cant access webgui of the bridge AP... Main problem : AP is lost, but its working as brigde. I cant find it in the network (it didnt have any ip!) so I cant change any configuration... First solution : Reset AP, but it cannot be done. Reset button dont works due to a bug in ddwrt micro firm that mi linksys WAP54g had installed (I really hate this firmware I like more openwrt that my main router has) Second Solution : arp -a from main router , from computers behind AP...It dont appears in the list. Any more ideas, the router at some level must be there, the brigde is working. I know its possible that the AP is with an ip like 192.168.100.2 , my subnect actually is 172.16.X.X. :) thanks!

    Read the article

  • Audio switch with multiple 3.5mm input & outputs

    - by David Nguyen
    I've been searching for a device that simple allows me to pick one input and one output from multiple input/outputs. I thought this would be a called a switch but I can only find ones with one input. Is there such a device that can do this? I will be attaching various devices, i.e. multiple console sound, PC & Laptop inputs and outputting to my speakers or headphones. I'm looking for something small and simple. All inputs and outputs are 3.5mm.

    Read the article

  • Help with routing table

    - by user68752
    I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

    Read the article

  • bluetooth connection using pybluez

    - by srj0408
    I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

    Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >