Search Results

Search found 11188 results on 448 pages for 'django manage py'.

Page 373/448 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

  • How to tell which process is hogging my CPU when they don't add up to 100%?

    - by endolith
    Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. The individual processes do not add up to 100%. I try killing lots of processes, but the overall usage continues to be 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, which is never anywhere near 100% CPU unless I'm doing something that requires it (like loading 32 Firefox tabs), after which it goes back to a normal idle level. It's not a new install or anything. There is no reason the processor should be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing every process, one at a time, until the problem went away, and killing vino-server finally fixed it, even though that process never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). But the question remains: How did a single process manage to use 100% CPU while top only showed that process at 5%? How do I identify culprits like this in the future? Looks like I'm not the only one who's had this problem: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

    Read the article

  • Should I use Evernote or Org-mode for taking notes?

    - by tobeannounced
    I am looking for an app that will help me manage my notes, and after coming across Org-mode, I was wondering whether Org-mode's functionality is strong enough that it can remove the need for me to use another note taking app (because org is more of a task management app), such as Evernote. My wishes for a note taking app are: can be accessed offline in some form, eg through an iPhone app or desktop client Org-Mode and Evernote can both do this, however it seems like MobileOrg is more aimed at tasks, rather than notes? If this is the case, I probably would use Evernote in addition to MobileOrg. I can clip web content into easily for research Evernote has the browser extension, how is it with Org-Mode? I know I can use c-c c-l, but how suited is it really for taking notes on stuff I am browsing in Chrome/Firefox? has voice notes on the iPhone and computer too, if possible Org-Mode cannot do this on the iPhone, on the computer could I record audio externally and then link the files in? I can add notes too on my iPhone & computer while not connected to the internet both can do this. The types of notes I am likely to have include: howtos/things I have learnt, documentation on my setup/stuff, research on things I may do in the future, ideas, and task specific notes. I have thought about where I would want to access each of these notes and will post that here if you think it would help. So, is Org-mode strong enough in note-taking and the requirements I listed that I can avoid the need to use a separate tool for taking notes?

    Read the article

  • How do I resolve certificate errors on HP blade center

    - by Martin Hilton
    I'm trying to sort out the ssl certificate errors that we get when trying to manage our HP c7000 blade enclosures. To that end I have created a signing certificate and imported it into the browser. In Onboard Administrator I created a certificate signing request, which I signed with my CA and then uploaded the certificate. This worked perfectly, and I no longer get any SSL errors when connection to Onboard Administrator. The problem comes when trying to connect through Onboard Administrator to the iLo on the blades themselves. Done by clicking on the "Web Administration" link. Onboard Administrator links to the blade with it's IP address rather than host name. But the certificate signing request that iLo creates uses the host name. Even when this certificate is signed the browser still complains it is for the wrong domain. I either need to be able to get Onboard Administrator to connect to the blades using host name rather than IP address, or get a certificate signing request which contains the IP address as the CN rather than the host name. It doesn't particularly matter which. Does anybody know how to configure this?

    Read the article

  • USB drive dead after stopping copying process on Snow Leopard Server

    - by Anriëtte Combrink
    Hi there I was copying to a flash drive from our Snow Leopard server when I stopped the copying process half way through. The device then disappeared from the Desktop. So I unplugged it and plugged it right back in. The device just didn't show up. I unplugged it and plugged it into a Windows XP machine as well as a Windows 7 machine. On both machines, I right clicked "My Computer" and selected "Manage…". On both PC's, the device was located under Removable Storage, but had no size and no drive letter. It shows up in "My Computer", but when I choose "Format…" from the right-click menu (context menu), it says the drive could not be formatted. Can someone please advise me? The flash drives is about 5 mins old and should have no reason to be dead. I really can't loose this drive (I don't need the data on it, I just need it to work again), any help would be appreciated. Thanks in advance.

    Read the article

  • Application for time and projet management

    - by user10826
    I want to improve the way I organize my projects/tasks/schedule What I do now is: keep an excel sheet with the name of the most important tasks/projects, I look at it at the beginning of each day and decide the ones I will focus on on iCal I write down events for each day, or for a concrete time (13 to 14 hours). I set up each day the tasks I want to accomlish, and allocate them hours I use Things (culture code) to keep info about tasks and projects not very important and which are not time allocated yet (GTD name = someday) I use Mail on Mac and create folders for the mails I want to process with the name of the different projects I save the main info for each project on freemind maps My system works well at the moment but it is pretty complicated to use. I want to make it better and I am looking for something with these requirements: must be 100% offline accessable it should use as less programs/resources as possible, ideally just one program should be able to manage all my info I can use the GTD methodology mixed with priorities and I can allocate each task converted to event on my calendar I can have different daily/weekly, etc views on a calendar to see the "big picture" must run on mac os x leopard price does not matter, I will pay for this So, according to your experience, can you recommend me something like this? Thanks

    Read the article

  • weird routes automatically being added to windows routing table

    - by simon
    On our windows 2003 domain, with XP clients, we have started seeing routes appearing in the routing tables on both the servers and the clients. The route is a /32 for another computer on the domain. The route gets added when one windows computer connects to another computer and needs to authenticate. For example, if computer A with ip 10.0.1.5/24 browses the c: drive of computer B with ip 10.0.2.5/24, a static route will get added on computer B like so: dest netmask gateway interface 10.0.1.5 255.255.255.255 10.0.2.1 10.0.2.5 This also happens on windows authenticated SQL server connections. It does not happen when computers A and B are on the same subnet. None of the servers have RIP or any other routing protocols enabled, and there are no batch files etc setting routes automatically. There is another windows domain that we manage with a near identical configuration that is not exhibiting this behaviour. The only difference with this domain is that it is not up to date with its patches. Is this meant to be happening? Has anyone else seen this? Why is it needed when I have perfectly good default gateways set on all the computers on the domain?!

    Read the article

  • Melting plastic around DC-in jack in laptop

    - by Ove
    I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

    Read the article

  • Azure's Ubuntu 12.0.4 fails to install PHP5

    - by Alex Kennberg
    Similar to this article from Azure themselves: http://www.windowsazure.com/en-us/manage/linux/common-tasks/install-lamp-stack/ I am trying to install PHP5 on Ubuntu 12.0.4 virtual machine. However, it fails installing the ssl-cert. $ sudo apt-get install php5 Reading package lists... Done Building dependency tree Reading state information... Done php5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 49 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up ssl-cert (1.0.28) ... Could not create certificate. Openssl output was: Generating a 2048 bit RSA private key ............................+++ ...................................................................................................................+++ writing new private key to '/etc/ssl/private/ssl-cert-snakeoil.key' ----- problems making Certificate Request 140320238503584:error:0D07A097:asn1 encoding routines:ASN1_mbstring_ncopy:string too long:a_mbstr.c:154:maxsize=64 dpkg: error processing ssl-cert (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ssl-cert E: Sub-process /usr/bin/dpkg returned an error code (1) Any tips appreciated.

    Read the article

  • internet-based sync software that will keep running after Windows Live Sync stops doing PC-to-PC-syncs?

    - by Warren P
    According to the wikipedia page, Microsoft Live Sync will shortly stop offering the PC-to-PC sync service. There are lots of apps to sync two PCs on the same LAN, but I want to sync two PCs that are in different cities, across the internet, traversing two different NATs, and that requires some kind of service running in the internet that both connect into. There is already a few questions about syncing folders and files, but this is not a duplicate because none of them answer this basic question: Microsoft Live Sync works better than RSYNC, or any of the linked SYNC solutions in any of the "not really duplicates" because it works even when the two PCs have NAT and firewalls between them that forbid direct connectivity, because Windows Live Sync has a free always-on internet server that all the client PCs connect into. I'm looking for a FREE (no-fees) Microsoft Live Sync work-alike PC-to-PC sync solution that works between PCs and Macs, at least, as well as between PCs, and works behind NAT and firewalls at least as well as Microsoft's solution. (Note that Microsoft's solution makes only outbound socket calls to a microsoft server, so this solution must necessarily include a server-hub component that is hosted publically on a free site and which does not require that I set up and manage and pay for my own public internet hosting site) Hint: None of the answers in the linked duplicate are equivalent (PureSync,FreeFileSync,BestSync 2010,SyncButler,Comodo BackUp,QuickShadow,Gbridge) in that none of them work for the PC to Mac situation, where firewalls and nats prevent direct connection, or else they require money to be paid. When Microsoft Live Sync / Live Mesh finally kills direct PC-to-PC mode, the limitation will be that you will have to pay for more than 25 GB of cloud service, and you can then only sync PC #1 to PC #2 if you first sync to the cloud, then down to other clients. I can currently sync 100 gb of data from one computer to another, only temporarily "moving the data" through Microsoft's data servers without using up my Skydrive storage quota.

    Read the article

  • Best photo management software?

    - by Niels Basjes
    Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

    Read the article

  • Where to get glib-config for Kubuntu?

    - by Carl Smotricz
    I'm trying to compile Midnight Commander on a KUbuntu 9.10 (Karmic) box with no root access. I've set up a directory under $HOME, downloaded the mc source package and various stuff required for building, such as autotools. I've unpacked the CONTENTS of all those packages into this working directory such that I have the usual ./usr, ./lib, ./etc hierarchy. I manage to get configure through a lot of tests, but I can't seem to fool it into finding glib. checking for glib-2.0... checking for glib-config... no checking for glib12-config... no checking for glib-config... no checking for GLIB - version >= 1.2.6... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: Test for glib failed. GNU Midnight Commander requires glib 1.2.6 or above. My system has glib installed: /lib/libglib-2.0.so.0 /lib/libglib-2.0.so.0.2200.3 ... and I've also downloaded and unpacked the glib package into my working directory: libglib2.0-0_2.22.2-0ubuntu1_i386.deb libglib2.0-dev_2.22.2-0ubuntu1_i386.deb ... but still the elusive glib-config is nowhere to be found. It's not in any debian package for Karmic, either. So I'd appreciate any help getting over this hurdle. Please note, again, that I don't have root, so I can't just merrily apt-get stuff.

    Read the article

  • Typical outbound port list for guest access?

    - by Steve
    I manage a weekly rental house that includes wireless Internet access. I've allowed all outbound ports on my router but my ISP has disabled my Internet access twice now because guests have downloaded (or served up) copyrighted content. So I'd like to institute some port filtering to discourage p2p sharing (see disclaimer below). But I don't want to inconvenience the 99.9% of folks who keep things above-board. My question is, what outbound ports are typically open for rental/hotel wireless Internet access, or where can I find such a list? TCP 80,443,25,110 at a minimum. Though my own email service uses 995 and 465 for SSL, some may use IMAP, I personally use SSH and FTP, so I'll open those. Roughly I figure I need to open access to privileged ports, and close 1024 & above. Is there a whitelist I should institute for commonly used high ports? And does it make sense to block UDP 1024 ? Disclaimer: I realize anyone replying to this message could circumvent the port filtering and share content to their heart's content. I do not need comprehensive p2p blocking, which requires more than a port whitelist. Anyone staying at the house shoulders the responsibility for their Internet use, per the rental contract. Also anyone savvy enough to circumvent the port filters would hopefully be savvy enough to use some sort of peer blocking, thereby preventing the ISP from taking down the service.

    Read the article

  • Windows 7, network shares, and authentication via local group instead of local user

    - by Donovan
    I have been doing some troubleshooting of my home network lately and have come to an odd conclusion that I was hoping to get some clarification on. I'm used to managing share permissions in a domain environment via groups instead of individual user accounts. I have a box at home running windows 7 ultimate and I decided to share some directories on that machine. I set it up to disallow guest access and require specifically granted permissions. (password moe?). Anyway, after a whole bunch of time i figured out that even though the shares I created were allowed via a local group i could not access them until i gave specific allowance to the intended user. I just didn't think i would have to do that. So here is the breakdown. Network is windows workgroup, not homegroup or nt domain PC_1 - win 7 ultimate - sharing in classic mode - user BOB - groups Admins PC_2 - win 7 starter - client - user BOB - groups admins PC_3 - win xp pro - client - user BOB - groups admins the share on PC_1 granted permission to only the local group administrators. local user BOB on PC_1 was a member of administrators. Both PC_2 and PC_3 could not browse the intended share on PC_1 because they were denied access. Also, no challenge was presented. They were simply denied. After adding BOB specifically to the intended share everything works just fine. Remember, its not an nt domain just a workgroup. But still, shouldn't i be able to manage share permissions via groups instead of individual user accounts? D.

    Read the article

  • Cisco ASA user authentication options - OpenID, public RSA sig, others?

    - by Ryan
    My organization has a Cisco ASA 5510 which I have made act as a firewall/gateway for one of our offices. Most resources a remote user would come looking for exist inside. I've implemented the usual deal - basic inside networks with outbound NAT, one primary outside interface with some secondary public IPs in the PAT pool for public-facing services, a couple site-to-site IPSec links to other branches, etc. - and I'm working now on VPN. I have the WebVPN (clientless SSL VPN) working and even traversing the site-to-site links. At the moment I'm leaving a legacy OpenVPN AS in place for thick client VPN. What I would like to do is standardize on an authentication method for all VPN then switch to the Cisco's IPSec thick VPN server. I'm trying to figure out what's really possible for authentication for these VPN users (thick client and clientless). My organization uses Google Apps and we already use dotnetopenauth to authenticate users for a couple internal services. I'd like to be able to do the same thing for thin and thick VPN. Alternatively a signature-based solution using RSA public keypairs (ssh-keygen type) would be useful to identify user@hardware. I'm trying to get away from legacy username/password auth especially if it's internal to the Cisco (just another password set to manage and for users to forget). I know I can map against an existing LDAP server but we have LDAP accounts created for only about 10% of the user base (mostly developers for Linux shell access). I guess what I'm looking for is a piece of middleware which appears to the Cisco as an LDAP server but will interface with the user's existing OpenID identity. Nothing I've seen in the Cisco suggests it can do this natively. But RSA public keys would be a runner-up, and much much better than standalone or even LDAP auth. What's really practical here?

    Read the article

  • Excel Help: Data Input Help

    - by B-Ballerl
    Everyday I download data from a site that will have rows each filled with individual data for clients. I'm able to input the data into excel as a whole but after that I'm having trouble figuring out how to put it into a chart. For example Web visits time. So say Client 1 stayed for 5 min increasing his total time on the site to 20 min and Client 2 stayed for 0 min keeping his time of 10 min and they were both registered on new years eve, and R1's last login was today and R2's was yesterday. (R for some reason repersents Client, no idea why...). Client 3 hasn't been on since he registered keeping his total at 4 min So my data would look something like this for Today (20110104) R1,20101231,20110104,20 R2,20101231,20110103,10 R3,20101231,20101231,4 And this for the day before (201101030), R1,20101231,20110102,15 R2,20101231,20110103,10 R3,20101231,20101231,4 I get about 200+ client rows each day where even the names of the Client list are changing. Is it possible to import the data each day and fill it in a excel sheet where the Client number is off on the left hand side in a table, and the amount of time (Whole Number ex. 4) each day it spends on the site extend to the right under it's specific date see Picture? I've manage to create a manual sheet but have been unsucessful at getting excel to do any of it for me. Here are two pictures:

    Read the article

  • Cable management techniques

    - by cornjuliox
    How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

    Read the article

  • RAID administration in Debian Lenny

    - by Siim K
    I've got an old box that I don't want to scrap yet because it's got a nice working 5-disk RAID assembly. I want to create 2 arrays: RAID 1 with 2 disks and RAID 5 with the other 3 disks. The RAID card is Intel SRCU31L. I can create the RAID 1 volume in the console that you access with Ctrl+C at startup. But it only allows for creation of one volume so I can't do anything with the 3 remaining disks. I installed Debian Lenny on the RAID 1 volume and it worked out nicely. What utilites could I now use to create/manage the RAID volumes in Debian Linux? I installed the raidutils package but get an error when trying to fetch a list: #raidutil -L controller or #raidutil -L physical # raidutil -L controller osdOpenEngine : 11/08/110-18:16:08 Fatal error, no active controller device files found. Engine connect failed: Open What could I try to get this thing working? Can you suggest any other tools? Command #lspci -vv gives me this about the controller: 00:06.1 I2O: Intel Corporation Integrated RAID (rev 02) (prog-if 01) Subsystem: Intel Corporation Device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at f9800000 (32-bit, prefetchable) [size=8M] [virtual] Expansion ROM at 30020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: PCI_I2O Kernel modules: i2o_core

    Read the article

  • Libraries merged folder views

    - by Stigma
    So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

    Read the article

  • Sharp mx2600 driver cannot see all the paper trays

    - by Frank R
    I am wondering if someone might have experienced this problem and have a solution. I have just taken over a network about a month ago so it is hard to know what truly worked and didn't work. However the end users reported that they used to be able to choose the tray they wanted to print from in the printer preferences in the driver for the Sharp MX2600n device then send the print job. Now they only have two trays to choose from instead of the four trays that exist. The only thing I have changed that might relate to this network device is the Admin password on the domain controller. I haven't made any changes to the Sharp device or the driver, until recently when I tired to update the driver for this device but that didn't fix anything. The domain controller is a Server 2008 VM running in Hyper-visor and it is pushing the shared printer out to the domain. I have looked at the web interface to manage the device and I can see all four paper trays in there, however if I try to see the number of trays from the driver interface, I can only see the top two paper trays and there should be four of them. This is the same with the admin account on the server or a workstation inside the domain, also a standard user account see's the same result. I have even tried updating the tray status within the driver to show more trays, but that doesn't help. I am hoping there is someone out there that has experienced this problem and knows a solution.

    Read the article

  • How to send mail with PHP [migrated]

    - by roth66
    My litle problem is about mail() function in PHP, it doesnt want to send emails, to my local server, or anywhere else. I don't think that function was supposed to send mail to adresses like: [email protected]; So I've installed a mail server: hmailserver, I installed a client: dream-mail; I installed sendmaill.exe; (actually unzipped it in a folder, then in php.ini set the sendmail_path to point to it) After countless trials and errors, it still doesn't work. my system would comprise in an Apache server 2.2, and PHP (last version I think 5.3 or somehing), running on windows. And now for avoiding the usual questions (Did you make rules in your firewall etc etc), I guess I should mention, that there arent any connectivity issues, everything is set to "local" (localhost), port 25, 110, 143, are all opened, And, after a few days of fiddling with my brand new mail-server, I manage to make it work. THe Dream-mail client, has a test, trough which it would test its connections, and according to it, the SMTP AND POP3 connections are all successful, it even sends an email, for testing. SO ya, it would work. The problem, remains: PHP mail funcion. And I really need it, since on my website there's a contact form, and right now is useless. I've also checked the form it self, and seems to be alright.

    Read the article

  • Apache crashes every 5min

    - by Simon
    I'm relatively new to server issues, having a site of mine that I started early in the year grow beyond my capabilities of managing it. I need help. I recently moved out of my shared hosting environment onto a dedicated virtual server from Mediatemple. Each week, I run a script that fetches data from my DB, fetches data from last.fm's API and then tweets information to Twitter. My server uses Virtuozzo and when the script runs, Apache crashes every 5min. I checked and saw that the 'kmemsize' parameter reaches its cap (its 13mb). I realise my problem. The MySQL process stays open for long while Apache needs to handle lots of incoming links (about 200 000 pageviews for that day according to my previous host's AWSTATS). Yes, I'm quite unexperienced in this, and I'm clearly killing the server with too many incoming links while it has to manage the updating of the DB. So that is the precedent: I want a few answers. 1) Why did my shared hosting environment not crash apache every 5min? It ran fine, the site only slowed a lot. Clearly, it must be the virtual container and the kmemsize limit? 2) Where do I go from here? Would a physical server (not a virtual container) encounter the same problems? I sent a support request to Mediatemple as well. I need all the help I can get.

    Read the article

  • Installing Joomla on Windows Server 2008 with IIS 7.0

    - by Greg Zwaagstra
    Hi, I have been spending the past while trying to install Joomla on a server running Windows Server 2008. I have successfully installed PHP (using Microsoft's web tool for installing PHP with IIS) and MySQL and am now trying to run the browser-based installation. Everything comes up green, I fill in the appropriate information regarding the site name, MySQL information, etc. and no errors are thrown. However, when I get to the step that asks me to remove the installation directory, I am unable to do so as Windows states it is in use by another program (I cannot fathom how this is true). Also, there is no configuration.php file that is created so if I were to manage to delete this folder I have a feeling that there would be problems. I was thinking there was some kind of a permissions issue and have set the permissions for IIS_IUSRS to have read, write, and execute permissions for the entire folder that Joomla resides in but this has not helped. Any help in this matter is greatly appreciated. ;) Greg EDIT: I decided to try and manually install Joomla by manually editing the configuration.php file. This has worked great and now I am certain there is some kind of a permissions issue going on because I am able to do everything that involves the MySQL database (create an article, edit menu items, etc.), but anything that involves making changes to Joomla installation's directory does not work (install plugins, edit configuration settings using the Global Configuration menu within Joomla, etc.) I have granted IIS_IUSRS every permission except Full Control (reading on the Joomla! forums shows that this should be enough for everything to work). This is confusing to me and I am quite stuck on this problem. EDIT 2: The bizarre thing is that in the System Info under Directory Permissions, everything turns up as Writable but then whenever I try to actually use Joomla to, for example, edit the configuration.php file using the interface, it says it is unable to edit the file.

    Read the article

  • Overriding vhost.conf to always allow PHP include access to directory

    - by Jeremy Dentel
    My predecessor in my job developed a simplistic newsletter system for our school's newspaper utilizing PEAR's Mail package. As I grow this system (and our site) we are constantly stuck with Plesk rewriting the vhost.conf file in which the PEAR include path has been manually entered. This has become an unwieldy task to actually manage and keep running. There's been a "note" from both the previous developer and I to attempt to solve this problem, but we can't entirely figure it out. I'm attempting a move to cPanel through another host, so hopefully it'll go away there, but until then, it can be tedious extremely difficult to get a solid uptake of the system without constant "web-presence." I've searched around and haven't found a solution. I'm rather new to the server management scene (command line was non-existant till around a year ago. =/), so I haven't found anything. Any help would be useful. "Similar Questions" popped this up, but it still seems to rely on vhost.conf, and will still allow changes within Plesk to overwrite the changes.

    Read the article

  • Migrating away from LVM

    - by Kye
    I have an Ubuntu home media server setup with 4.5TB split across a few hard-drives (1x3TB, 2x1TB) and I'm using LVM2 to manage the volumes. I have recently added a 60GB SSD to my server, and I wish to use it to house the 'root' partition of my server (which is currently under the LVM group). I don't want to simply add it to the LVM volume group, because (afaik) there's no way to ensure that the SSD will be used for the root filesystem. If I just throw it at the VG, it may be used to house my media, which would defeat the purpose of having the SSD in the first place. I feel that my only solution is to somehow remove my root partition from the LVM setup and copy it across to the SSD. My boot partition is, of course, not part of the LVM group. My disk setup is as follows: 60GB SSD: EMPTY. 1TB HDD: /boot, LVM space. 1TB HDD: LVM space. 3TB HHD: LVM space. I have a few logical volumes. my root (/), a 'media' volume for my media collection, a backup one for my network backups.etc. Does anyone have any advice as to how to go about this? My end goal is to have the 60GB SSD used for my boot and root partitions, with everything else on the 3TB/1TB/1TB hard-drives.

    Read the article

  • fcgiwrap listening to a unix socket file: how to change file permissions

    - by user36520
    I have a web server (nginx) and a CGI application (gitweb) that is ran with fcgiwrap to enable Fast CGI access to it. I want the Fast CGI protocol to take place over a unix socket file. To start the fcgiwrap daemon, I run: setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" (this is a daemontools daemon) The problem is that my web server runs as the user www-data and not the user git. And fcgiwrap creates the socket fastcgi.sock with user git, group git and read only fort the non owner. Thus, nginc with the user www-data can't access the socket. Apparently, fcgiwrap is not able to select permissions of unix socket files. And this is quite annoying. Moreover, if I manage to have the socket file exists before I run fcgiwrap (which is quite difficult given I did not find any shell command to create a socket file), it quits with the following error: Failed to bind: Address already in use The only solution I found is to start the server the following way: rm -f fastcgi.sock # Ensure that the socket doesn't already exists (sleep 5; chgrp www-data fastcgi.sock; chmod g+w fastcgi.sock) & exec setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" Which is far from the most elegant solution. Can you think of anything better ? Thanks

    Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >