Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 374/715 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• Linux software raid robustness

  - by Waxhead

  I have a 4 disk 5TB raid5 setup where a disk is showing signs of going down the drain. It is reporting media errors and from dmesg I can see that several read errors are corrected. smartctl does report "notifications" but no panic so far. Since new disks are rather expensive at the moment I am starting to pondering exactly how robust the linux md layer is. I would appreciate if someone could shed some light on how md actually deals with disk errors. For example how does md deal with write and read errors - what does it (really) take for disk to be rejected from an array. I also read that recently md got support for mapping out bad blocks. Does this mean that the read errors I've had would have been mapped out if I where running kernel 3.1 or would md still try to "work on them" to make them usable.

  Read the article

• Asterisk - Trying to use call files to create a conference call between two dynamic numbers

  - by Hank

  I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

  Read the article

• re-enabling a table for mysql replication

  - by jessieE

  We were able to setup mysql master-slave replication with the following version on both master/slave: mysqld Ver 5.5.28-29.1-log for Linux on x86_64 (Percona Server (GPL), Release 29.1) One day, we noticed that replication has stopped, we tried skipping over the entries that caused the replication errors. The errors persisted so we decided to skip replication for the 4 problematic tables. The slave has now caught up with the master except for the 4 tables. What is the best way to enable replication again for the 4 tables? This is what I have in mind but I don't know if it will work: 1) Modify slave config to enable replication again for the 4 tables 2) stop slave replication 3) for each of the 4 tables, use pt-table-sync --execute --verbose --print --sync-to-master h=localhost,D=mydb,t=mytable 4) restart slave database to reload replication configuration 5) start slave replication

  Read the article

• Windows XP SP3 on Macbook Has Limited Disk Space

  - by Mikey.B

  Hi Guys, I setup Windows XP SP3 on a 40 GB partition using bootcamp (partition formatted for NTFS). For some reason, the hard drive properties only show ~3 GB of space available. Funny thing is though, I've hardly installed anything on the system... and if I open the windows explorer, select all directories, and check properties, it appears that I'm only using 11 GB of space. What gives? I thought there might be hidden files/folders so I enabled the option to show it but still nada. Has anyone come across this before? Any suggestions for how to proceed here?

  Read the article

• How to connect devices behind Comcast router/modem with devices behind wireless router

  - by deeperDATA

  I know this is going to seem like a simple solution but I have been unable to find a clear answer through Google. Simple office setup: I have a Comcast modem/router that has 4 hard wired ports. In one of those ports I have a Cisco wireless router which also has 4 of its own ports. What is the method for getting devices behind the modem/router to ping/communicate with devices behind the wireless router? They are all on the same subnet but the IP ranges differ. The router produces 192.168.1.1 by default while the Comcast modem/router produces 10.1.10.1 by default. I think what I'm attempting to do might be considered "extending" the modem/router's network but I'm not sure. Thank you in advance for your assistance.

  Read the article

• BAD DC transfering FSMO Roles to ADC

  - by Suleman

  I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• XenServer 5.5 Error adding additional Server to Ressource Pool

  - by SideShowCoder

  I'm running Citrix XenServer 5.5 as a testsetup, with Openfiler providing Storage via NFS. I tried to setup a Ressource Pool to test Live migration but I'm unable to a my 2. Server to the Pool. It fails after about 10sec with the Error: 4/26/2010 2:54:52 PM Error: Adding server 'u-173-c047.XXX.XXX' to pool 'Portland' - Internal error: Stunnel.Stunnel_error("") I'm kind of lost right now where to look whats causing this, and the Error is not really of any help. Are there logs availible somewhere besides in XenCenter, which might be helpful? Any Ideas what is causing this? Thanks

  Read the article

• How do I get KLIPS or NETKEY on 11.10 server?

  - by Incognito

  I'm attempting to run OpenSWAN on my Ubuntu11.10 server. All I've done so far is install openswan from the package manager and attempt to set up conf files. However, IPSec support seems to be broken, thus OpenSWAN can't do it's thing. Attempt to start IPSec $ sudo ipsec setup --start ipsec_setup: Starting Openswan IPsec 2.6.28... ipsec_setup: No KLIPS support found while requested, desperately falling back to netkey ipsec_setup: Even NETKEY support is not there, aborting Verify IPSec $ sudo ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.28/K(no kernel code presently loaded) Checking for IPsec support in kernel [FAILED] Checking that pluto is running [FAILED] whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") Checking for 'ip' command [OK] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] IPSec Version $ sudo ipsec version Linux Openswan U2.6.28/K(no kernel code presently loaded) See `ipsec --copyright' for copyright information. Linux build: $ uname -a Linux metabox 2.6.18-028stab092.1 #1 SMP Wed Jul 20 19:47:12 MSD 2011 x86_64 x86_64 x86_64 GNU/Linux How can I go about correcting this problem with IPSec? This is a hosted VPS, and I'd like to avoid a kernel rebuild if I can find some other alternative.

  Read the article

• Reverse proxy with SSL and IP passthrough?

  - by Paul

  Turns out that the IP of a much-needed new website is blocked from inside our organization's network for reasons that will take weeks to fix. In the meantime, could we set up a reverse proxy on an Internet-based server which will forward SSL traffic and perhaps client IPs to the external site? Load will be light. No need to terminate SSL on the proxy. We may be able to poison DNS so original URL can work. How do I learn if I need URL rewriting? Squid/apache/nginx/something else? Setup would be fastest on Win 2000, but other OSes are OK if that would help. Simple and quick are good since it's a temporary solution. Thanks for your thoughts!

  Read the article

• Allen for Umbraco - Upload photos from your iPhone - iPad and iPod Touch

  - by Vizioz Limited

  At last year's UK Umbraco Festival we gave a demo of our alpha version of Allen for Umbraco, at that stage the application only worked on an iPhone and was a very quick prototype to see what people thought.When we returned to our office the next day, we decided if we were going to release Allen for Umbraco into the wild we really should start again from scratch, the main two reasons for this were;First to ensure it was a truly Universal application ( i.e. it can be installed on an iPhone, iPad or iPod ) which looks and behaves differently depending on the device. The second reason was we really wanted the application to be the foundations of more than just image uploading for Umbraco, for this to be the case we ensured the new version was built following proven design patterns and with lots of unit tests so that we can easily extended it.We have lots of plans for future versions of Allen for Umbraco including adding iCloud support to keep all your settings in sync across your multiple Apple devices. We are also working on support for Umbraco 5 which should be release soon.When you download the App and setup your site, make sure you have a look at the Image Resizing settings, by default we have set these to resize your images to 512 pixels wide, however you can choose from a variety of different resizing methods (by Height, Width, Fit within a frame or the full size image).Also, by default when you select a photo you will see that the image is named with it's date and time stamp of when the photograph was taken (or the current date and time if the original date is not stored in your image). If you click on this name you can edit the name of your photo before it is uploaded.Finally, we are really keep to get your feedback, so within the App help section you will find a way to submit Suggestions and if needed, you can send up Support emails from within the App :)We hope you enjoy the first version of Allen for Umbraco and we look forward to bringing you lots of exciting additional functionality in the future!

  Read the article

• Is there a way to add AD LDS users to an AD Domain Group or allow them domain security rights?

  - by Tom

  I have a web application in which our outside customers need access to run transactions (stored procs on Sql Server) on our domain. We have looked into LDS to keep these users separate from our domain. The problem we are having is allowing the LDS users the AD security rights to access these stored procs. For administration purposes we would like to use an AD group for each transaction (stored proc) which has access to execute. Is there a way to add LDS users to this AD group or allow them the security rights to do this? We have setup LDS and can authenicate an AD user thru to runs these transactions. LDS is running on Server 08 R2. AD is also Server 08 R2. Thanks.

  Read the article

• Migrating 2008 AD to Windows SBS 2011 and Forefront TMG 2010

  - by Tong Wang

  Our company has two physical servers: a Dell R710 with 4 NIC and a Dell R410 with 2 NIC. Right now, we have Windows server 2008 R2 installed on R710 with AD setup to host our domain. I am thinking to install both SBS 2011 and TMG 2010 on the other R410 running on Hyper-V. As I am fairly new to Windows Server technology, I'd like to check with you fellow Windows admins and see what is the proper way to install SBS 2011 and TMG 2010 and how to migrate the 2008 AD. Your advice and help will be highly appreciated.

  Read the article

• Recommended SpamAssassin update channels?

  - by Timo Geusch

  I'm currently using SpamAssassin on a couple of mail servers that I look after. SpamAssassin runs in the context of amavisd-new on those servers and with the usual bunch of plugins (FuzzyOCR, DCC, pyzor, razor). Currently the servers are getting their rule updates from the default SpamAssassin update channel (updates.spamassassin.org). Overall the setup seems to be reasonably effective but some types of spam seem to wander right through it even though I've made repeated attempts at training spamassassin. My guesstimate is that about 85%-90% of the spam that gets through policyd-weight makes it through the filters and it's been getting a lot worse recently as spammers are getting better at working their way through filters. Can someone recommend additional sources of filters to make SpamAssassin more effective? So far I've found OpenProtect's update channel but are there others worth looking at?

  Read the article

• SQL Server 2005 jobs running twice in a row - using LiteSpeed

  - by Malnizzle

  Howdy! I have a SQL server (2005) backing up to a network share, who has a group of maintenance plans setup through LiteSpeed to backup different DBs. They were just set up to run two sub plans on different schedules for full/diff backups and did that just fine for a couple of months. Then I added "Clean Up" task to the subplans. Ever since that point, the backup creates another bak right after the first bak job is completed. I removed the clean up item from the subplan, and it still creates two baks when ran. Both the SQL Activity Monitor and the machine's windows application log show just one job being executed. I did this same thing to a couple of other servers backing up to the same location, and they are behaving correctly. Thoughts?

  Read the article

• CodePlex Daily Summary for Friday, February 25, 2011

  CodePlex Daily Summary for Friday, February 25, 2011Popular ReleasesMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...patterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...PhoneyTools: Initial Release (0.1): This is the 0.1 version for preview of the features.Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.Smartkernel: Smartkernel: ????，??????Document.Editor: 2011.7: Whats new for Document.Editor 2011.7: New Find dialog Improved Email dialog Improved Home tab Improved Format tab Minor Bug Fix's, improvements and speed upsChiave File Encryption: Chiave 0.9.1: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Change Log from 0.9 Beta to 0.9.1: ======================= >Added option for system shutdown, sleep, hibernate after operation completed. >Minor Changes to the UI. >Numerous Bug fixes. Feedbacks are Welcome!....Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Silverlight????[???]: silverlight????[???]2.0: ???????，?????，????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Azure Storage Samples: Version 1.0 (February 2011): These downloads contain source code. Each is a complete sample that fully exercises Windows Azure Storage across blobs, queues, and tables. The difference between the downloads is implementation approach. Storage DotNet CS.zip is a .NET StorageClient library implementation in the C# language. This library come with the Windows Azure SDK. Contains helper classes for accessing blobs, queues, and tables. Storage REST CS.zip is a REST implementation in the C# language. The code to implement R...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.2: New FeaturesPowerGUI Console Tool Window PowerShell Project Type PowerGUI 2.4 SupportMiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...New ProjectsAgriscope: This is an open information visualization tool used to assist RADA and other Agriculture officers in retrieving and analyzing data in day to day tasks.AVCampos NF-e: Realizar a emissão e controle de nf-e, através de ambientes moveis.Babel Obfuscator NAnt Tasks: This is an NAnt task for Babel Obfuscator. Babel Obfuscator protect software components realized with Microsoft .NET Framework in order to make reverse engineering difficult. Babel Obfuscator can be downloaded at http://www.babelfor.netConcurrent Programming Library: Concurrent Programming Library provides an opportunity to develop a parallel programs using .net framework 2.0 and above. It includes an implementation of various parallel algorithms, thread-safe collections and patterns.EOrg: Gelistirme maksatli yaptigim çalismalar.Extend Grid View: Extend grid view is user control. It help paging a dataset is set on gridview.FinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Game development with Playstation Move and Ogre3D: This project is a research aiming to develop a program which can handle the Playstation Move on PC. After that, we will implement a game based on it. The programming language is C++. The graphics is handled by Ogre3D.JAD: Projeto de software.JSARP: This tool allows describing and verifying Petri Nets with the support of a graphical interface. This tool, is being developed in Java.KangmoDB - A replacement for the storage engine of SQLite: KangmoDB claims to be a real-time storage engine that replaces the one in SQLite. KangmoDB tries to achieve the lowest latency time for a transaction with ACID properties. It will be mainly used for the stock market that requires lowest latency with highest stability. MetaprogrammingInDotNetBook: This project will contain code and other artifacts related to the "Metaprogramming in .NET" book that should be avaible in October 2011.munix workstation: The µnix project is an endeavour to create a complete workstation and UNIX-like OS using standard logic IC's and 8-bit AVR microcontrollers. The goal isn't to make something that will compete with a traditional workstation in computation but instead to have a great DIY project.PhoneyTools: Set of controls and utilities for WP7 development.Plist Builder: Serialize non-circular-referencing .NET objects to plist in .NET.Quake3.NET: A port of the Quake 3 engine to C#. This is not merely a port of Quake 3 to run in a managed environment, but a complete rewrite of the engine using C# 4.0's powerful language features.SecViz: Web server security attack graph alert correlation IDS SerialNome: This is a multiport serial applicationsprout sms: a wp7 cabbage clientUsing external assembly in Biztalk 2009 map: Using external assembly in Biztalk 2009 map.

  Read the article

• Jabber Breaks in Empathy

  - by Tim Lytle

  Using empathy in Ubuntu 10.04 (64 bit), everything worked great after initial setup. But after disconnecting and reconnecting, any Jabber connection (GTalk and Facebook Chat) gives a 'network error'. Tried disabling accounts and only connecting to GTalk, same error. Tried removing all accounts, adding GTalk, same error. Upgraded to the dev version of Empathy, connected once, then after going 'offline' and reconnecting, same error. If it just didn't work, I'd wait for some kind of fix. But it did work, but only once per install. How does that happen? Anyone with this problem that solved it?

  Read the article

• Set iDRAC IP Address on Ubuntu 12.04 without Reboot?

  - by BT643

  We have a Dell PowerEdge R720XD server and want to setup iDRAC, but this is a production server so we need to do it without a reboot if possible. We just need to set the IP address on the iDRAC but the servers do not have a front LCD panel so we cannot use this. The iDRAC will currently have the default 192.168.0.120 IP address but we are not on this IP range so cannot use this. We need to change it to 192.168.5.x. I've seen racadm mentioned, but before I start messing around installing this on Ubuntu, is this what we need? and will we be able to set the IP address on the DRAC with this? Thanks

  Read the article

• What are good values for PSU voltages?

  - by earlz

  Hello, I have an odd computer I'm trying to fix that will crash only during the setup of an OS(crashes on every OS I've tried so far) It's not overheating and it is stripped down as much as possible and I've tried multiple harddrives, and memtest86+ can run on it for 3 hours without a crash or fail. So, I was a bit stumped and was looking in the BIOS for possible causes and found a hardware monitor that shows PSU voltages. They are: VCORE: 1.432V 3.3V: 3.136V 5V: 5.273 12V: 12.144V I thought the 3.3V looked a little low, but I'm not really sure on how "bad" that is. So, what are the good ranges for the voltages on each CPU rail?

  Read the article

• Amazon EC2 - HTTPS - Certificate body is invalid. The body must not contain a private key

  - by Tam Minh

  I'm very new to Amazon EC2. I am trying to setup https for my website, I follow the offical instruction from amazon doc: http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/configuring-https.html When I Upload a Signed Certificate using AWS command aws iam upload-server-certificate --server-certificate-name dichcumga --certificate-body file://mycert.pem --private-key file://signedkey.pem --certificate-chain file://mychain.pem And I got error A client error (MalformedCertificate) occurred when calling the UploadServerCert ificate operation: Certificate body is invalid. The body must not contain a private key. mycert.pem is a combination of private.pem and signedkey.pem (which return by VeriSign) copy private.pem+signedkey.pem mycert.pem Please help to shed a light. Thank you in advance.

  Read the article

• configure Reverse DNS for VPS with amazon route 53, ISP or Amazon Route 53 issue?

  - by Oscar Cabrero

  i have a VPS hosted with myhosting.com, the domain is hosted in godaddy and the DNS records are managed in AMAZON route 53. i was told by myhosting support that i should create a PTR record on my DNS but i have read that in order to reverse DNS for an IP this record should be created in the ISP records wich sounds have sense. because if i want to get the domain name via an IP the request will never be forwarded to AMAZON instead it will ask the ISP for it am i rigth or MyHosting support is correct and i should setup PTR record on Amazon which i already did THANKS Oscar

  Read the article

• Restored Domain Controller does not display any information using dcdiag command

  - by dasko

  I am testing restoring a domain controller from system state backup to different hardware in a non production environment as a sanity check for our restoration procedure. When i run the dcdiag command I get "blank info back" and all that is displayed are two lines as follows: Domain Controller Diagnosis Performing initial setup: and then I am returned to the command prompt. Even when I do dcdiag /v i get the same result. I have double checked the DNS settings and Active Directory works properly. All FSMO roles are being held by this restored Domain Controller. I am able to join test pc's to the domain without issue etc Is this a common issue or is there something that I am missing. Thanks.

  Read the article

• Windows 7 Reading Proper Disk Usage Statistics on Mounted Volumes

  - by Troy Perkins

  I'm running windows 7 with 2 x 1.5 TBYTE Drives. The second internal drive is setup as a mounted volume as C:\Archives Clicking computer icon in windows explorer, it only shows capacity stats for C: and Not C:\Archives Also, the usage stats that do show for C: show to be 100% capacity red - yet the system runs fine. No warnings. Can someone explain this? I do have a lot of stuff on the c: drive, but I'm sure its not 1.5 TB worth and C:\Archives hardly has anything it. Thanks! Troy

  Read the article

• Windows 7 Software Installation : Siemens Step7 and Siemens SCL

  - by Shaharyar

  Hello sysadmins, We use Siemens Step7 and SCL for PLC programming in our company. I recently got to install Windows 7 and had yet to find out that the Siemens software suite doesn't install anymore. - Which is a pain... Checking through the setup files, I found following entries in the Setups.ini file: [OS] PlattformIDAllowed=1;2 WinXP=True WinXPExclude=0,Home,1 WinXPWarning=1 WinNETServer=True WinNETServerExclude=Home,0,1 WinNETServerWarning=Home,0,1 Win2003=1 Win2003Exclude=Home,0,1 Win2003Warning=Home,0,1 Win2003R2=1 Win2003R2Exclude=0,1 Win2003R2Warning=0,1 WinVista=1 Win2008=1 Win7=1 I added the last line to try things out and it still provides me the same error.. As far as I know the suite is installed by Install**Shield**. All help would be very appreciated!

  Read the article

• Is it possible to change the content database of an existing SharePoint '07 web app?

  - by mcjabberz

  Disclaimer: I'm very much an accidental SharePoint admin so I greatly appreciate your patience. My SharePoint farm's database server is EOL and about to die. I have managed to get the config database (SharePoint_Config) moved over to the new database server and even managed to get the Central Administration site to use the new database server. I have even added the new database server to the farm as a content database server. My problem right now is with the web app's content database (WSS_Content). I already have a copy of the content database setup and ready to go on the new database server but, for the life of me, I can't figure out how to change the SharePoint web app's database over to it. Is this even possible? If so, how would I do it? If not, would I have to create a new web app and then restore (and overwrite) its WSS_Content database with my existing one?

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >