Search Results

Search found 11961 results on 479 pages for 'boot arguments'.

Page 378/479 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• Xorg fails to start under Ubuntu

  - by den-javamaniac

  I'm running desktop Ubuntu 9.10 on my Dell laptop. Previously it was Ubuntu 9.04. After some period of time (lets say 3-4 months) my X fails to start automatically after some restart calls. If that takes place my network manager applet doesn't start either (after I do startx). Can any one point out what I'm missing/what's the problem? EDDITED I get a perfect server boot meaning there's no Xorg started. Command line interface is all I get starting from login and further.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Problem starting X in unbuntu 10.10

  - by xain

  Hi, I recently installed ubuntu 10.10 on my old toshiba a100 (where I've been running XP with no problems for ages). The installation went fine, I can log in with my user account, but after that the screen has only the wallpaper (and the mouse is enabled). Any hints on how to troubleshoot it ? These are the Xorg and the messages log files. Thanks When booted in safe graphics mode it worked just fine. Is there a way to set that configuration as the default so I don't have to go through those menus every time I boot ?

  Read the article

• Recover partition table after DD command

  - by Shreedhar

  I executed the following command from a Ubuntu live cd terminal (dont ask why). dd if=/dev/zero of=/dev/sdb2 bs=512 count=1 Where sdb2 is a NTFS partition (third partition) on a disk. Suffice to say it is now messed up. When I boot into windows 7, it does show me E drive but when I click on it it asks me to format it. I am not ever sure what I did, did I mess up partition table or only the MFT? Is there any way to get the data back PLEASE HELP! this is very important :(

  Read the article

• Bootable backup for Windows (7) - Like Super Duper for Mac

  - by Dan F.

  Just got an SSD installed on my notebook and as people suggested I want have my bases covered in case it fails and I expect it to fail. Here is what I have in mind... keep a partition on the main drive (HDD) the same size as the SSD and keep a "clone" there, and in case the SSD fails... I take the SSD out and boot from the clone partition. From my understanding SuperDuper! does just that for MacOS, but I don't seem to find a something similar. I've found a lot of great tools out there that enables you to make bootable images (CloneZilla, DriveImage XML, Acronis® True Image™ to name a few), that is not what I'm looking for.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Fusion 3, Windows 7, frequent blue screens

  - by kenny6127

  Is anyone else seeing this problem? A solution would be great (hey, it's Windows, it's gonna blue screen, just gotta deal with it), but it's also nice to know if it's something specific to my configuration, or if a lot of folks are having the same issue. Here's the details: * MacBook Pro 15" unibody, 4 GB, 2.4 GHz, 10.5.8 * Fusion 3.0.1 * Windows 7 Pro, 32-bit (clean install, not migrated from Boot Camp or anything) Blue screens happen nearly every time the MBP cover is closed for a short period of time (< 3 minutes). If the cover is closed for a half hour or longer, the VM is fine. I'm guessing it might be related to sleep, but that's hard to tell, and the Windows crash dump logs are pretty useless. Thanks!

  Read the article

• How can I repair a Windows 7 Bootloader without a Window 7 Disc?

  - by Solignis

  I have a bit of a problem, I got my boss's laptop next to me and it won't boot. He told me it had hard crashed so he... you are going to love this... removed the battery. So when it put it back in and turned on the machine it gets past POST ("The Toshiba Screen") but I just get a flashing white prompt then it disappears and sits there. I don't have the original CDs. What can I do? I do have an Ubuntu CD and a few other Linux CDs like Gparted and Clonezilla. Is there anything I can do?

  Read the article

• Bootstrapped Ubuntu 12.04 EC2 instance. Where to find log?

  - by nocode

  So I bootstrapped a shell script to install and run a bunch of tasks. Looks like the it ran for the most part, but I added one part and that was formatting an extra EBS volume. Pretty straightforward: mkfs.ext4 /dev/xvdf mkdir –m 000 /vol01 echo “/dev/xvdf /vol01 auto noatime 0 0” | sudo tee –a /etc/fstab sudo mount /vol01 I was able to install MongoDB, NGINX and Forever. I selected to use /dev/xdvf in the AWS console and see it. The 3rd line is not in fstab either. I've searched through various logs in /var/log/ but I don't really see much indicating the execution of the bootstrap. Logs that I see and looked through: auth.log boot.log dmesg dpkg.log syslog udev

  Read the article

• Is UEFI more or less vulnerable than Legacy BIOS?

  - by Eric

  Is UEFI more secure than BIOS on a Windows 8.1 machine? Is UEFI vulnerable to malware in ways that Legacy BIOS is not? Is it correct that UEFI can connect to the internet before the OS (or anti-virus program) has loaded? On some boards, UEFI settings can be changed in Windows. Do these things affect PC security? I have read that BIOS on an MBR disc can be vulnerable to 'rootkits' There have been reports that suggest UEFI secure boot may not be infallible. Is UEFI better at defending against malware than BIOS?

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by vette982

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• How to fix Asus Eee PC 900 startup issues after failure?

  - by EBrown

  My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by user41926

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Unable to mount cifs in redhat 6

  - by user3734522

  I am relatively new to Linux, and I am trying to mount a CIFS filesystem from an openfiler instance I have on my network in Red Hat. The openfiler instance is authenticating using AD. I am able to connect using samba: smbclient '\\10.25.214.26\cluster_storage.cluster.Cluster' -U [DOMAIN]+[USERNAME] Enter DOMAIN+USERNAME's password: Domain=[DOMAIN] OS=[Unix] Server=[Samba 3.5.6] smb: \> When I attempt to mount on boot via fstab, I am told that the line is bad during startup. mount -t cifs -o username=[DOMAIN]+[USERNAME], password=[my password], domain=[domain.edu] '\\10.25.214.26\cluster_storage.cluster.Cluster' /mnt/scratch Any help would be greatly appreciated.

  Read the article

• DVD/CD-ROM drives stop working in Windows 7

  - by Marcus L

  All of a sudden Windows 7 (64 bit) lost all DVD and CD-ROM drives. It worked fine for about a month, then I don't know what happened. At first I thought it was a hardware problem - that my DVD-ROM had malfunctioned. But then I realized that Windows 7 no longer picked up on Demon Tools drives either. I can boot both Windows installation and Knoppix from the DVD-drive. So it seems to be a general problem with "disc-media". When trying to reinstall the hardware DVD-ROM Windows recognizes the drive (though sometimes simply label it as "CD-ROM drive"), but then says something went wrong - with from what I understand is a default error message (39), claiming the driver has become corrupt. I've tried every Microsoft recommended action, i.e. uninstall, reinstall, look for driver updates etc. etc., but with no luck. Any tip most welcome!

  Read the article

• Make services not start automatically after reboot (as they require access to an encrypted partition)

  - by Binary255

  Hi, I use Ubuntu Server 10.04. I more or less only want the server to be accessible over SSH after a reboot. I will then login and mount the encrypted partition myself, after which I start the services which uses it. How would I go about setting something like that up? (My first idea was to have everything except /boot in an encrypted LVM, but I never got logging in through SSH and mounting the LVM to work. Initramfs was a bit too complicated for me. Otherwise I think this would have been the best solution.)

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Was Windows 95 an Operating System?

  - by shantnu

  This question maybe a bit historical, but we didn't have Superuser at the time. Around 2000 when I was starting my Computer science degree, a subject was Operating systems. The teacher asked us to list a few OS. I said Windows 95. I was immediately shot down. Windows 95 wasn't on OS, as it used DOS to boot up. The actual OS was DOS, Win 95 was just a graphical wrapper around it. I pointed that all trade magazines called Win95 an OS, but was told that they were run by laymen, and as a professional, I should know better. DOS was the only OS from Microsoft, at least till Win2K came out later that year. So 12 years on, I'm still not sure. Could Win 95 be considered an OS?

  Read the article

• Copied XEN vm to new host - boots up asking to fix the HD (win2003 guest)

  - by Mister IT Guru

  I have an old box running CentOS 5.4, and XEN. It has a 2003 Guest that I wish to move over to another CentOS box running XEN. I stopped the machine, and have SCP'd the HD image files of the guest to the new host. I ran md5sum on the files, and they are identical. When I configure a new Guest, it fires up, but windows fails to boot asking to fix the system instead. The HD are identical, so I'm guessing there is something that I missed. I don't want to go through this procedure, because the system needs to be identical. How can I get one VM to run seamlessly on another host? Any ideas, and comments are 100% appreciated. Thank You

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >