Search Results

Search found 92113 results on 3685 pages for 'code template'.

Page 375/3685 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• How do I test database-related code with NUnit?

  - by Michael Haren

  I want to write unit tests with NUnit that hit the database. I'd like to have the database in a consistent state for each test. I thought transactions would allow me to "undo" each test so I searched around and found several articles from 2004-05 on the topic: http://weblogs.asp.net/rosherove/archive/2004/07/12/180189.aspx http://weblogs.asp.net/rosherove/archive/2004/10/05/238201.aspx http://davidhayden.com/blog/dave/archive/2004/07/12/365.aspx http://haacked.com/archive/2005/12/28/11377.aspx These seem to resolve around implementing a custom attribute for NUnit which builds in the ability to rollback DB operations after each test executes. That's great but... Does this functionality exists somewhere in NUnit natively? Has this technique been improved upon in the last 4 years? Is this still the best way to test database-related code? Edit: it's not that I want to test my DAL specifically, it's more that I want to test pieces of my code that interact with the database. For these tests to be "no-touch" and repeatable, it'd be awesome if I could reset the database after each one. Further, I want to ease this into an existing project that has no testing place at the moment. For that reason, I can't practically script up a database and data from scratch for each test.

  Read the article

• Is there something wrong with this code? AMFReader vs AMFWriter

  - by Triynko

  Something doesn't seem right about the source code for Flash Remoting's Date(AS3) <- DateTime(.NET) stream reader/writer methods, when it comes to handling UTC <- Local times. It seems to write the DateTime data fine, including a 64-bit representation as milliseconds elapsed since Jan 1, 1970, as well as a UTC offset. public void WriteDateTime(DateTime d) { this.BaseStream.WriteByte(11); DateTime time = new DateTime(0x7b2, 1, 1); long totalMilliseconds = (long)d.Subtract(time).TotalMilliseconds; long l = BitConverter.DoubleToInt64Bits((double)totalMilliseconds); this.WriteLong(l); int hours = TimeZone.CurrentTimeZone.GetUtcOffset(DateTime.Today).Hours; this.WriteShort(hours); } But when the data is read... it seems to be ignoring the short UTC offset value that was written, and appears to just discard it! private DateTime ReadDateValue() { long num2 = (long)this.ReadDouble(); DateTime time2 = new DateTime(0x7b2, 1, 1).AddMilliseconds((double)num2); int num3 = this.ReadInt16() / 60; //num3 is not used for anything! return time2; } Can anyone make sense of this? I also found some similar source code for AMFReader here, which has a ReadDateTime method, that seems to do something very similar... but goes on to use the UTC offset for something.

  Read the article

• How can I modify my code to line through the bezier control points?

  - by WillyCornbread

  HI all - I am using anchor points and control points to create a shape using curveTo. It's all working fine, but I cannot figure out how to get my lines to go through the center of the control points (blue dots) when the line is not straight. Here is my code for drawing the shape: // clear old line and draw new / begin fill var g:Graphics = graphics; g.clear(); g.lineStyle(2, 0, 1); g.beginFill(0x0099FF,.1); //move to starting anchor point var startX:Number = anchorPoints[0].x; var startY:Number = anchorPoints[0].y; g.moveTo(startX, startY); // Connect the dots var numAnchors:Number = anchorPoints.length; for (var i:Number=1; i<numAnchors; i++) { // curve to next anchor through control g.curveTo(controlPoints[i].x,controlPoints[i].y, anchorPoints[i].x, anchorPoints[i].y); } // Close the loop g.curveTo(controlPoints[0].x,controlPoints[0].y,startX,startY); And the shape I'm drawing for reference: How can I modify my code so that the lines go directly through the blue control points? Thanks in advance! b

  Read the article

• Is there a tool that can refactor this C code correctly?

  - by Alex

  Lets say I have the following code (the array* function are what we use for resizable arrays and they operate on pointers-to-arrays that are null initialized): typedef struct MyStruct { int i; } MyStruct; MyStruct* GetNewMyStruct(int i) { MyStruct* s = malloc(sizeof(MyStruct)); s->i = i; return s; } int SomeFunction(int number, MyStruct *elem) { MyStruct **structs = NULL; int i; for (i = 0; i < number; i++) arrayPush(&structs, GetNewMyStruct(i)); arrayPush(&structs, elem); return arraySize(&structs); } I decide that SomeFunction is too large and I want refactor it. Currently where I work we use VisualAssist X, which has some refactoring capabilities, but when I use it on this it does not work correctly. If I attempt to use it to refactor out the loop, this is what I get: void MyMethod( int number, MyStruct ** structs ) { int i; for (i = 0; i < number; i++) arrayPush(&structs, GetNewMyStruct(i)); } int SomeFunction(int number, MyStruct *elem) { MyStruct **structs = NULL; MyMethod(number, structs); arrrayPush(&structs, elem); return arraySize(&structs); } This is not correct. MyMethod should take a MyStruct ***, not a MyStruct **. This is because the code I'm refactoring takes the address of structs. The result is that the refactored version will always return 1 (since only one object has been pushed into my array) rather than number+1. Are there other tools out there that do this type of refactoring correctly?

  Read the article

• Why this Either-monad code does not type check?

  - by pf_miles

  instance Monad (Either a) where return = Left fail = Right Left x >>= f = f x Right x >>= _ = Right x this code frag in 'baby.hs' caused the horrible compilation error: Prelude> :l baby [1 of 1] Compiling Main ( baby.hs, interpreted ) baby.hs:2:18: Couldn't match expected type `a1' against inferred type `a' `a1' is a rigid type variable bound by the type signature for `return' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the expression: Left In the definition of `return': return = Left In the instance declaration for `Monad (Either a)' baby.hs:3:16: Couldn't match expected type `[Char]' against inferred type `a1' `a1' is a rigid type variable bound by the type signature for `fail' at <no location info> Expected type: String Inferred type: a1 In the expression: Right In the definition of `fail': fail = Right baby.hs:4:26: Couldn't match expected type `a1' against inferred type `a' `a1' is a rigid type variable bound by the type signature for `>>=' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the first argument of `f', namely `x' In the expression: f x In the definition of `>>=': Left x >>= f = f x baby.hs:5:31: Couldn't match expected type `b' against inferred type `a' `b' is a rigid type variable bound by the type signature for `>>=' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the first argument of `Right', namely `x' In the expression: Right x In the definition of `>>=': Right x >>= _ = Right x Failed, modules loaded: none. why this happen? and how could I make this code compile ? thanks for any help~

  Read the article

• Why execution of a portion of code loaded from external file is not halted by the OS?

  - by menjaraz

  I've harnessed a project released on internet a long time ago. Here comes the details, all irrelevant things being stripped off for sake of concision and clarity. A binary file whose content is descibed below HEX DUMP: 55 89 E5 83 EC 08 C7 45 FC 00 00 00 00 8B 45 FC 3B 45 10 72 02 EB 19 8B 45 FC 8B 55 0C 01 C2 8B 45 FC 03 45 08 8A 00 88 02 8D 45 FC FF 00 EB DD C6 45 FA 00 83 7D 10 01 76 6C 80 7D FA 00 74 02 EB 64 C6 45 FA 01 C7 45 FC 00 00 00 00 8B 45 10 48 39 45 FC 72 02 EB E2 8B 45 FC 8B 4D 0C 01 C1 8B 45 FC 03 45 0C 8D 50 01 8A 01 3A 02 73 30 8B 45 FC 03 45 0C 8A 00 88 45 FB 8B 45 FC 8B 55 0C 01 C2 8B 45 FC 03 45 0C 40 8A 00 88 02 8B 45 FC 03 45 0C 8D 50 01 8A 45 FB 88 02 C6 45 FA 00 8D 45 FC FF 00 EB A7 C9 C2 0C 00 90 90 90 90 90 90 is loaded into memory and executed using the following method snippet var MySrcArray, MyDestArray: array [1 .. 15] of Byte; // ... MyBuffer: Pointer; TheProc: procedure; SortIt: procedure(ASrc, ADest: Pointer; ASize: LongWord); stdcall; begin // Initialization of MySrcArray with random Bytes and display here ... // Instructions of loading of the binary file into MyBuffer using merely **GetMem** here ... @SortIt := MyBuffer; try SortIt(@MySrcArray, @MyDestArray, 15); // Display of MyDestArray (The outcome of the processing !) except // Invalid code error handling end; // Cleaning code here ... end; works like a charm on my box. My Question: How comes it works without using VirtualAlloc and/or VirtualProtect?

  Read the article

• what are all the Optimize tricks that you know for asp.net code ?

  - by Aristos

  After some time of many code programming on asp.net, I discover the very big speed different between string and StringBuilder. I know that is very common and known but I just mention it for start. The second think that I have found to speed up the code, is to use the const, and not the static, for declare my configuration constants value (especial the strings). With the const, the compiler not create new object, but just place the value, on the point that you have ask it, but with the static declaration, is create a new memory object and keep its on the memory. My third trick, is when I search for string, I use hash values, and not the string itself. For example, if I need a List<string SomeValues, and place inside strings that I need to search them, I prefer to use List<int SomeHashValue, and I use the hash value to locate the strings. My forth thought that I was wandering, is if is better to place big strings in one line, or separate them in different lines with the + symbol to be more easy to read out. I make some tests and see that the compiler make a good job is some split the string, in many lines, using the + symbol. What other tricks/tips do you know and use on your programming to make it run faster, and maybe use less memory. Well I know, that some times, to make something run faster, you need more memory, more cache. My priority is on speed. Because Speed Counts.

  Read the article

• Why is my code slower using #import "progid:typelib" than using "MFC Class From TypeLib"?

  - by Pakman

  I am writing an automation client in Visual C++ with MFC. If I right-click on my solution » Add » Class, I have the option to select MFC Class From TypeLib. Selecting this option generates source/header files for all interfaces. This allows me to write code such as: #include "CApplication.h" #include "CDocument.h" // ... connect to automation server ... CApplication *myApp = new CApplication(pDisp); CDocument myDoc = myApp->get_ActiveDocument(); Using this method, my benchmarking function that makes about 12000 automation calls takes 1 second. Meanwhile, the following code: #import "progid:Library.Application" Library::IApplicationPtr myApp; // ... connect to automation server ... Library::IDocumentPtr myDoc = myApp->GetActiveDocument(); takes about 2.4 seconds for the same benchmark. I assume the smart-pointer implementation is slowing me down, but I don't know why. Even worse, I'm not sure how to use #import construct to achieve the speeds that the first method yields. Is this possible? How or why not? Thanks for your time!

  Read the article

• XSL transformation generating output from other nodes

  - by Abel Morelos

  I have the following XSL template: <xsl:template match="SOAP-ENV:Body/*[local-name()='Publisher']"> <html> <xsl:call-template name="body" /> </html> </xsl:template> The previous template generates the output I want, it's generating the tags containing the output generated by the "body" template. The issue I'm having is that before the opening tag I'm getting text output from a previous node. Not sure why this is happening since I'm not selecting these other nodes. For example: <SOAP-ENV:Header> <!-- Many child nodes here--> </SOAP-ENV:Header> <SOAP-ENV:Body> <publishParty:Publisher> <!-- Many child nodes here--> </publishParty:Publisher> </SOAP-ENV:Body> Given the previous sample XML fragment, my output would contain what I would expect of formatting the Publisher element, but I'm also getting the text nodes of the children of the SOAP-ENV:Header node. Any ideas? Thanks!

  Read the article

• How to create custom pages (Drupal 6.x)

  - by jc70

  In the template.php file I inserted the code below: I found a tutorial online that gives the code, but I'm confused on how to get it to work. I copied the code below and inserted it into the template.php from the theme HTML5_base. I duplicated the page.tpl.php file and created custom pages -- page-gallery.tpl.php and page-articles.tpl.php. I inserted some text to the files just see that I've navigated to the pages w/ the changes. It looks like Drupal is not recognizing gallery.tpl.php and page-articles.tpl.php. In the template.php there are the following functions: html5_base_preprocess_page() html5_base_preprocess_node() html5_base_preprocess_block() In the tutorial it uses these functions: phptemplate_preprocess_page() phptemplate_preprocess_block() phptemplate_preprocess_node() function phptemplate_preprocess_page(&$vars) { //code block from the Drupal handbook //the path module is required and must be activated if(module_exists('path')) { //gets the "clean" URL of the current page $alias = drupal_get_path_alias($_GET['q']); $suggestions = array(); $template_filename = 'page'; foreach(explode('/', $alias) as $path_part) { $template_filename = $template_filename.'-'.$path_part; $suggestions[] = $template_filename; } $vars['template_files'] = $suggestions; } } function phptemplate_preprocess_node(&$vars) { //default template suggestions for all nodes $vars['template_files'] = array(); $vars['template_files'][] = 'node'; //individual node being displayed if($vars['page']) { $vars['template_files'][] = 'node-page'; $vars['template_files'][] = 'node-'.$vars['node']->type.'-page'; $vars['template_files'][] = 'node-'.$vars['node']->nid.'-page'; } //multiple nodes being displayed on one page in either teaser //or full view else { //template suggestions for nodes in general $vars['template_files'][] = 'node-'.$vars['node']->type; $vars['template_files'][] = 'node-'.$vars['node']->nid; //template suggestions for nodes in teaser view //more granular control if($vars['teaser']) { $vars['template_files'][] = 'node-'.$vars['node']->type.'-teaser'; $vars['template_files'][] = 'node-'.$vars['node']->nid.'-teaser'; } } } function phptemplate_preprocess_block(&$vars) { //the "cleaned-up" block title to be used for suggestion file name $subject = str_replace(" ", "-", strtolower($vars['block']->subject)); $vars['template_files'] = array('block', 'block-'.$vars['block']->delta, 'block-'.$subject); }

  Read the article

• How to distribute the android reusable code in a package?

  - by Kaillash

  Hi, I have developed some reusable android component which is basically a class . This class has some resource dependencies e.g. some png drawables, some xml layouts etc. So this class referenced the auto-generated R file.I would like to distribute this code in a single package like jar file to other developers for use in their applications. I have read that the only possible solution is to distribute code together with all my resources, which others have to copy to their "res" folder (source). So I created a jar file having the class file (say MyClass which is in the package com.xyz.android.app) and resources and tried to use this in my new application. So I added the jar file to my new applications build path using add external jars option in eclipse and copied all the resources to my new application's res folder. (The activity class say MainActivity of my new application is in com.abc.myapplication package, just for the case if it may helpful) But when I run this new application there is java.lang.ClassCastException in the MyClass class. I tried to debug the application and then I found that in the MyClass class, there is "R cannot be resolved" problem. Then I changed MainActivity's package to com.xyz.android.app (which is not the way, other developers will be happy to do), But again the same problem. But When I just copy the source java file such that both MainActivity.java and MyClass.java are in com.xyz.android.app package then application runs fine. So if I need to distribute such that other users need not to bother these package naming things, how can I accomplish this? Please help !!

  Read the article

• Rails and GIT workflow advice.

  - by dannymcc

  Hi Everyone, I need some advice with my desired setup with git and rails. Basically for my first Rails application I used a base application template from GitHub, I then made a ton of changes and now have a full application which is fairly customised. I have now extracted all of the changes I made to the files within the base application template and have committed the changes to my fork of the github repo. Ideally, I would like to have the base application template as a branch in my application and rebase it with my master. Is this actually possible? The reason I want to do this: I want to keep the base application up to date and functional, so for my next project I can just clone the base application template from my github fork and get working. Likewise, if anyone fixes any bugs in the base application template, I could merge those fixes with any application I have the base application template as a branch? Is this possible? Is there a better/more common way to do this? Thanks in advanced! Thanks, Danny

  Read the article

• What can cause my code to run slower when the server JIT is activated?

  - by durandai

  I am doing some optimizations on an MPEG decoder. To ensure my optimizations aren't breaking anything I have a test suite that benchmarks the entire codebase (both optimized and original) as well as verifying that they both produce identical results (basically just feeding a couple of different streams through the decoder and crc32 the outputs). When using the "-server" option with the Sun 1.6.0_18, the test suite runs about 12% slower on the optimized version after warmup (in comparison to the default "-client" setting), while the original codebase gains a good boost running about twice as fast as in client mode. While at first this seemed to be simply a warmup issue to me, I added a loop to repeat the entire test suite multiple times. Then execution times become constant for each pass starting at the 3rd iteration of the test, still the optimized version stays 12% slower than in the client mode. I am also pretty sure its not a garbage collection issue, since the code involves absolutely no object allocations after startup. The code consists mainly of some bit manipulation operations (stream decoding) and lots of basic floating math (generating PCM audio). The only JDK classes involved are ByteArrayInputStream (feeds the stream to the test and excluding disk IO from the tests) and CRC32 (to verify the result). I also observed the same behaviour with Sun JDK 1.7.0_b98 (only that ist 15% instead of 12% there). Oh, and the tests were all done on the same machine (single core) with no other applications running (WinXP). While there is some inevitable variation on the measured execution times (using System.nanoTime btw), the variation between different test runs with the same settings never exceeded 2%, usually less than 1% (after warmup), so I conclude the effect is real and not purely induced by the measuring mechanism/machine. Are there any known coding patterns that perform worse on the server JIT? Failing that, what options are available to "peek" under the hood and observe what the JIT is doing there?

  Read the article

• Target module with custom layout in Magento

  - by dardub

  In my custom module, I'd like to include an extra block and style sheet that targets only pages within my custom module. So that when i access myserver.com/configurator/ Pages will use the correct template I specified In the catalog.xml file, I noticed <catalog_category_default> That seems to be what I am looking for, so I tried: <configurator_default_default> <reference name="root"> <action method="setTemplate"><template>configurator/2columns-right.phtml</template></action> </reference> <reference name="head"> <action method="addCss"><stylesheet>css/configurator.css</stylesheet></action> </reference> <reference name="content"> <block type="configurator/guide" name="timeline" template="configurator/guide/timeline.phtml" /> </reference> </configurator_default_default> But it doesn't change the template for pages within the module. I also tried <configurator_guide_default> But it doesn't pick up the correct template If i put it within the specific page such as <configurator_guide_page1> Then it works.

  Read the article

• What do I have to change in my PHP/CURL code to retrieve data from a https:// URL?

  - by Edward Tanguay

  I have a PHP file using CURL that accepts a Google Doc URL as a parameter, then returns the plain text of the Google Doc. It worked well until recently when apparently a redirect was added so that the http:// address redirects to the equivalent https:// address, as in this example: http://docs.google.com/View?id=dc7gj86r_20dn2csqg3 So I changed my code to access the https:// address, but it just returns blank. What do I have to change my CURL code so that I can get the HTML text from the https:// address? $url = filter_input(INPUT_GET, 'url',FILTER_SANITIZE_STRING); $validUrlPrefixes[] = "https://docs.google.com"; if(beginsWithOneOfThese($url, $validUrlPrefixes)) { $user_agent = 'Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)'; $ch = curl_init(); curl_setopt($ch, CURLOPT_COOKIEJAR, "/tmp/cookie"); curl_setopt($ch, CURLOPT_COOKIEFILE, "/tmp/cookie"); curl_setopt($ch, CURLOPT_URL, $url ); curl_setopt($ch, CURLOPT_FAILONERROR, 1); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); curl_setopt($ch, CURLOPT_RETURNTRANSFER,1); curl_setopt($ch, CURLOPT_TIMEOUT, 15); curl_setopt($ch, CURLOPT_USERAGENT, $user_agent); curl_setopt($ch, CURLOPT_VERBOSE, 0); $rawData = curl_exec($ch); $rawData = cleanText($rawData); if(beginsWith($url, "https://docs.google.com")) { echo qstr::convertGoogleDocContentToText($rawData); die; } echo $rawData; die;

  Read the article

• From where to send mails in a MVC framework, so that there is no duplication of code?

  - by Sabya

  It's a MVC question. Here is the situation: I am writing an application where I have "groups". You can invite other persons to your groups by typing their email and clicking "invite". There are two ways this functionality can be called: a) web interface and b) API After the mail sending is over I want to report to the user which mails were sent successfully (i.e., if the SMTP send succeeded. Currently, I am not interested in reporting mail bounces). So, I am thinking how should I design so that there is no code duplication. That is, API and web-interface should share the bulk of the code. To do this, I can create the method "invite" inside the model "group". So, the API and and the Web-interface can just call: group-invite($emailList); This method can send the emails. But the, problem is, then I have to access the mail templates, create the views for the mails, and then send the mails. Which should actually be in the "View" part or at least in the "Controller" part. What is the most elegant design in this situation? Note: I am really thinking to write this in the Model. My only doubt is: previously I thought sending mails also as "presentation". Since it is may be considered as a different form of generating output.

  Read the article

• What do you do when your boss doesn't care about code quality?

  - by Chad Johnson

  My boss (a proprietor) is a developer like me. He comes, however, from a C background and severely lacks knowledge of the benefits of proper object-oriented design. That, or he simply ignores them. So my co-worker developed this feature prototype in a week, and it's not release-ready--at least not from a good code standpoint. It works; it does the job--but it'sa freaking prototype. It's totally not scalable. My boss wants to wow clients and "just get the feature out." I understand that. But, we could take two weeks and finish this shit up, or we could take three and finish this shit up AND do it so that it's scalable. I just KNOW we are going to want to add onto this feature in the coming months, and then, a customer is going to "need it in a week," and so even though we've agreed to refactor when we want to add onto the feature, IT WILL NEVER HAPPEN! This ALWAYS happens. I'm the code quality assurance guy, but my boss seems to see me as a radical and thinks I just waste time, whereas I actually am trying to follow good, known solid design patterns. He just wants his stinking feature though, and he doesn't want to spend the time or money to do things well. He pretty much listens to what I have to say, and then he ultimately just makes the decision to take the shortest path (which cuts corners a lot). I often develop large, important features for our software. THOSE THINGS TAKE TIME! They're not happy with the time it's taken with past projects, though, but the features I've put in all work really damn well and are very scalable. How do you all deal with this kind of situation?

  Read the article

• What's the vbs code to schedule a task every time Windows starts up?

  - by Wing C. Chen

  I would like to know how to write up the vbs code to schedule a windows task to start a .exe program every time the Windows starts up. I found the following code online: strComputer = "." Set objWMIService = GetObject("winmgmts:" _ & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2") Set objNewJob = objWMIService.Get("Win32_ScheduledJob") errJobCreated = objNewJob.Create _ ("Notepad.exe", "********123000.000000-420", _ True , 1 OR 4 OR 16, , , JobID) Wscript.Echo errJobCreated But it only tells me how to schedule the task every on some specific days and hours. I thought of creating a windows service. However the following is the story why I must look for an alternative to it. I created a windows service with RunAsService for my java program wrapped with Janel. The Service worked fine when I first installed and started it. However, after restarting my windows xp, a dialog window poped out saying that my janel generated .exe file has crashed, with my RunAsService service kept on going. The service worked fine when I terminated the service and restarted it again manually. Nevertheless, the same crash happens over and over again every time I restart my Windows.

  Read the article

• Hi I am facing a fragmentation error while executing this code? Can someone explain why?

  - by aks

  #include<stdio.h> struct table { char *ipAddress; char *domainName; struct table *next; }; struct table *head = NULL; void add_rec(); void show_rec(); int main() { add_rec(); show_rec(); return 0; } void add_rec() { struct table * temp = head; struct table * temp1 = (struct table *)malloc(sizeof(struct table)); if(!temp1) printf("\n Unable to allocate memory \n"); printf("Enter the ip address you want \n"); scanf("%s",temp1->ipAddress); printf("\nEnter the domain name you want \n"); scanf("%s",temp1->domainName); if(!temp) { head = temp; } else { while(temp->next!=NULL) temp = temp->next; temp->next = temp1; } } void show_rec() { struct table * temp = head; if(!temp) printf("\n No entry exists \n"); while(temp!=NULL) { printf("ipAddress = %s\t domainName = %s\n",temp->ipAddress,temp->domainName); temp = temp->next; } } When i execute this code and enters the IP address for the first node, i am facing fragmentation error. The code crashed. Can someone enlighten?

  Read the article

• At which line in the following code should I commit my unit of work?

  - by Pure.Krome

  I have the following code which is in a transaction. I'm not sure where/when I should be commiting my unit of work. On purpose, I've not mentioned what type of Respoistory i'm using - eg. Linq-To-Sql, Entity Framework 4, NHibernate, etc. If someone knows where, can they please explain WHY they have said, where? (i'm trying to understand the pattern through example(s), as opposed to just getting my code to work). Here's what i've got :- using ( TransactionScope transactionScope = new TransactionScope ( TransactionScopeOption.RequiresNew, new TransactionOptions { IsolationLevel = IsolationLevel.ReadUncommitted } ) ) { _logEntryRepository.InsertOrUpdate(logEntry); //_unitOfWork.Commit(); // Here, commit #1 ? // Now, if this log entry was a NewConnection or an LostConnection, // then we need to make sure we update the ConnectedClients. if (logEntry.EventType == EventType.NewConnection) { _connectedClientRepository.Insert( new ConnectedClient { LogEntryId = logEntry.LogEntryId }); //_unitOfWork.Commit(); // Here, commit #2 ? } // A (PB) BanKick does _NOT_ register a lost connection, // so we need to make sure we handle those scenario's as a LostConnection. if (logEntry.EventType == EventType.LostConnection || logEntry.EventType == EventType.BanKick) { _connectedClientRepository.Delete( logEntry.ClientName, logEntry.ClientIpAndPort); //_unitOfWork.Commit(); // Here, commit #3 ? } _unitOfWork.Commit(); // Here, commit #4 ? transactionScope.Complete(); }

  Read the article

• Bash script to insert code from one file at a specific location in another file?

  - by Kurtosis

  I have a fileA with a snippet of code, and I need a script to insert that snippet into fileB on the line after a specific pattern. I'm trying to make the accepted answer in this thread work, but it's not, and is not giving an error so not sure why not: sed -e '/pattern/r text2insert' filewithpattern Any suggestions? pattern (insert snippet on line after): def boot { also tried escaped pattern but no luck: def\ boot\ { def\ boot\ \{ fileA snippet: LiftRules.htmlProperties.default.set((r: Req) => new Html5Properties(r.userAgent)) fileB (Boot.scala): package bootstrap.liftweb import net.liftweb._ import util._ import Helpers._ import common._ import http._ import sitemap._ import Loc._ /** * A class that's instantiated early and run. It allows the application * to modify lift's environment */ class Boot { def boot { // where to search snippet LiftRules.addToPackages("code") // Build SiteMap val entries = List( Menu.i("Home") / "index", // the simple way to declare a menu // more complex because this menu allows anything in the // /static path to be visible Menu(Loc("Static", Link(List("static"), true, "/static/index"), "Static Content"))) // set the sitemap. Note if you don't want access control for // each page, just comment this line out. LiftRules.setSiteMap(SiteMap(entries:_*)) // Use jQuery 1.4 LiftRules.jsArtifacts = net.liftweb.http.js.jquery.JQuery14Artifacts //Show the spinny image when an Ajax call starts LiftRules.ajaxStart = Full(() => LiftRules.jsArtifacts.show("ajax-loader").cmd) // Make the spinny image go away when it ends LiftRules.ajaxEnd = Full(() => LiftRules.jsArtifacts.hide("ajax-loader").cmd) // Force the request to be UTF-8 LiftRules.early.append(_.setCharacterEncoding("UTF-8")) } }

  Read the article

• Using an embedded Word document to create a new instance of that document.

  - by jim

  For a variety of reasons that are immutable ... I have a Word document which contains a VBA application (the 'app document') which creates a new document based on another document (the 'template') which contains the framework for the new document. I want to embed the 'template' into the 'app document' so that I deliver one file and I know I am using the correct version of the 'template'. I have, so far, embedded the 'template' file into the 'app document' and can find it by looping through "ThisDocument.InlineShapes", looking at .Field.OleFormat.IconLabel to find the 'template' by its name. The inlineShape.Field.OleFormat.Object is the 'template' document itself, and I can .Activate it, which causes it to appear as a regular document. I try to do SaveAs, and it does in fact save the file as the name I give it, however, that saved-as file is not left open, just the embedded file. I can not .Activate the file and just save it, then open the saved file, but that seems more work than necessary. So ... is the way I am doing this "the way", or I have missed some obvious practice? TIA

  Read the article

• Concise C# code for gathering several properties with a non-null value into a collection?

  - by stakx

  A fairly basic problem for a change. Given a class such as this: public class X { public T A; public T B; public T C; ... // (other fields, properties, and methods are not of interest here) } I am looking for a concise way to code a method that will return all A, B, C, ... that are not null in an enumerable collection. (Assume that declaring these fields as an array is not an option.) public IEnumerable<T> GetAllNonNullAs(this X x) { // ? } The obvious implementation of this method would be: public IEnumerable<T> GetAllNonNullAs(this X x) { var resultSet = new List<T>(); if (x.A != null) resultSet.Add(x.A); if (x.B != null) resultSet.Add(x.B); if (x.C != null) resultSet.Add(x.C); ... return resultSet; } What's bothering me here in particular is that the code looks verbose and repetitive, and that I don't know the initial List capacity in advance. It's my hope that there is a more clever way, probably something involving the ?? operator? Any ideas?

  Read the article

• Windows 7 Create Folder in "Program Files" failing in C# code even thought I have admin rights!

  - by Shiva

  Hi, I am unable to create a file under "program files" folder on my Windows 7 64-bit machine in VS 2008 WPF C# code. The error I get on the following code myFile = File.Create(logFile); is the following. (this is the innerException stack trace). at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.File.Create(String path) at MyFirm.MyPricingApp.UI.App.InitializeLogging() in C:\Projects\MyPricingApp\App.xaml.cs:line 150 at MyFirm.MyPricingApp.UI.App.Application_Startup(Object sender, StartupEventArgs e) in C:\Projects\MyPricingApp\App.xaml.cs:line 38 at System.Windows.Application.OnStartup(StartupEventArgs e) at System.Windows.Application.<.ctor>b__0(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) this seems like it has something to do with UAC in Windows 7, because why else would I get this since my user is already Admin on the machine ?! Also since the WinIOError has SECURITY_ATTRIBUTES, I am thinking this has something to do with a "new way" security is handled in Windows 7. I tried to browse to the "Program Files" folder, under which the log folder and file were to be created. I can create the folder by hand, but when i try to create the file, I get the similar "Access Denied" exception.

  Read the article

• Expand chaining hashtable. Errors on code.

  - by FILIaS

  Expanding a hashtable with linked lists there are some errors and warnings. I wanna make sure that the following code is right (expand method) and find out what happens that raise these warnings/errors typedef struct { int length; struct List *head; struct List *tail; } HashTable; //resolving collisions using linked lists - chaining typedef struct { char *number; char *name; int time; struct List *next; }List; //on the insert method i wanna check hashtable's size, //if it seems appropriate there is the following code: //Note: hashtable variable is: Hashtable * ...... hashtable = expand(hashtable,number,name,time); /**WARNING**:assignment makes pointer from integer without a cast*/ HashTable* expand( HashTable* h ,char number[10],char* name,int time) /**error**: conflicting types for ‘expand’ previous implicit declaration of ‘expand’ was here*/ { HashTable* new; int n; clientsList *node,*next; PrimesIndex++; int new_size= primes[PrimesIndex]; /* double the size,odd length */ if (!(new=malloc((sizeof( List*))*new_size))) return NULL; for(n=0; n< h->length; ++n) { for(node=h[n].head; node; node=next) { add (&new, node->number, node->name,node->time); next=node->next;//// free(node); } } free(h); return new; }

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >