Search Results

Search found 10900 results on 436 pages for 'dev docs'.

Page 375/436 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

  Read the article

• IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

  - by Daniel

  I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

  Read the article

• Linux port-based routing using iptables/ip route

  - by user42055

  I have the following setup: 192.168.0.4 192.168.0.6 192.168.0.1 +-----------+ +---------+ +----------+ |WORKSTATION|------| LINUX |------| GATEWAY | +-----------+ +---------+ +----------+ 192.168.150.10 | 192.168.150.9 +---------+ | VPN | +---------+ 192.168.150.1 WORKSTATION has a default route of 192.168.0.6 LINUX has a default route of 192.168.0.1 I am trying to use the gateway as the default route, but route port 80 traffic via the VPN. Based on what I read at http://www.linuxhorizon.ro/iproute2.html I have tried this: echo "1 VPN" >> /etc/iproute2/rt_tables sysctl net.ipv4.conf.eth0.rp_filter = 0 sysctl net.ipv4.conf.tun0.rp_filter = 0 sysctl net.ipv4.conf.all.rp_filter = 0 iptables -A PREROUTING -t mangle -i eth0 -p tcp --dport 80 -j MARK --set-mark 0x1 ip route add default via 192.168.150.9 dev tun0 table VPN ip rule add from all fwmark 0x1 table VPN When I run "tcpdump -i eth0 port 80" on LINUX, and open a webpage on WORKSTATION, I don't see the traffic go through LINUX at all. When I run a ping from WORKSTATION, I get this back from some packets: 92 bytes from 192.168.0.6: Redirect Host(New addr: 192.168.0.1) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 de91 0 0000 3f 01 4ed3 192.168.0.4 139.134.2.18 Is this why my routing is not working ? Do I need to put GATEWAY and LINUX on different subnets to prevent WORKSTATION being redirected to GATEWAY ? Do I need to use NAT at all, or can I do this with routing alone (which is what I want) ?

  Read the article

• Mac updated just now, postgres now broken

  - by user52224

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• Issue with InnoDB engine while enabling and [ skip-innodb ]

  - by Ahn

  How to enable InnoDB, which was previously disabled with skip-innodb option. Case 1: Disabled the innodb with skip-innodb option and show engines givens as below. Engine | Support ... | InnoDB | NO ...... Case 2: As I want to enable the innodb, I commanded the #skip-innodb option and restarted. But now the show engines even not showing the InnoDB engine in the list. ? Mysql Version : 5.1.57-community-log OS : CentOS release 5.7 (Final) Log: 120622 13:06:36 InnoDB: Initializing buffer pool, size = 8.0M 120622 13:06:36 InnoDB: Completed initialization of buffer pool InnoDB: No valid checkpoint found. InnoDB: If this error appears when you are creating an InnoDB database, InnoDB: the problem may be that during an earlier attempt you managed InnoDB: to create the InnoDB data files, but log file creation failed. InnoDB: If that is the case, please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/error-creating-innodb.html 120622 13:06:36 [ERROR] Plugin 'InnoDB' init function returned error. 120622 13:06:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 120622 13:06:36 [Note] Event Scheduler: Loaded 0 events 120622 13:06:36 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.57-community-log' socket: '/data/mysqlsnd/mysql.sock1' port: 3307 MySQL Community Server (GPL)

  Read the article

• “NT AUTHORITY\ANONYMOUS LOGON” error in Windows 7 (ASP.NET & Web Service)

  - by Tony_Henrich

  I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use the 'Classic .NET AppPool' with NetworkServices identity. I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? Did I miss a setting? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

  Read the article

• How to completely disable IPv6 for loopback interface on RHEL 5.6

  - by Marc D

  I've done lots of research on how to disable IPv6 on RedHat Linux and I have it almost completely disabled. However the loopback interface is still getting an inet6 loopback address (::1/128). I can't find where IPV6 is still enabled for loopback. To disable IPV6 I added the following settings to /etc/sysctl.conf: net.ipv6.conf.default.disable_ipv6=1 net.ipv6.conf.all.disable_ipv6=1 And also added the following line to /etc/sysconfig/network: NETWORKING_IPV6=no After rebooting, the inet6 address is gone from my physical interface (eth0), but is still there for lo: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:50:56:xx:xx:xx brd ff:ff:ff:ff:ff:ff inet 10.x.x.x/21 brd 10.x.x.x scope global eth0 If I manually remove the IPV6 address from loopback and then bounce the interface, it comes back: # ip addr del ::1/128 dev lo # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo # ip link set lo down # ip link set lo up # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever I believe IPV6 should be disabled at the kernel level as confirmed by sysctl: # sysctl net.ipv6.conf.lo.disable_ipv6 net.ipv6.conf.lo.disable_ipv6 = 1 Any ideas on what else would cause the loopback interface to get an IPV6 address?

  Read the article

• How to keep subtree removal (`rm -rf`) from starving other processes for Disk I/O?

  - by David Eyk

  We have a very large (multi-GB) Nginx cache directory for a busy site, which we occasionally need to clear all at once. I've solved this in the past by moving the cache folder to a new path, making a new cache folder at the old path, and then rm -rfing the old cache folder. Lately, however, when I need to clear the cache on a busy morning, the I/O from rm -rf is starving my server processes of disk access, as both Nginx and the server it fronts for are read-intensive. I can watch the load average climb while the CPUs sit idle and rm -rf takes 98-99% of Disk IO in iotop. I've tried ionice -c 3 when invoking rm, but it seems to have no appreciable effect on the observed behavior. Is there any way to tame rm -rf to share the disk more? Do I need to use a different technique that will take its cues from ionice? Update: The filesystem in question is an AWS EC2 instance store (the primary disk is EBS). The /etc/fstab entry looks like this: /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2

  Read the article

• SSH agent forwarding on debian squeeze

  - by nfvindaloo

  Im trying to set up SSH forwarding like this osx debianA debianB I can connect to debianA fine, using ssh -A and it has the following env vars when i do: SSH_AGENT_PID=1543 SSH_AUTH_SOCK=/tmp/ssh-giwdYY1542/agent.1542 SSH_CLIENT='92.233.199.x 38954 22' SSH_CONNECTION='92.233.199.x 38954 108.171.179.x 22' SSH_TTY=/dev/pts/0 When i try to connect to debianB, the agent is not used! ssh -v output ends with: debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /home/nic/.ssh/id_rsa debug1: Trying private key: /home/nic/.ssh/id_dsa debug1: Next authentication method: password Then im asked for a password. I have not set any ForwardAgent no directives in ssh_config and dont have a .ssh/config at all. sshd_config has not got AllowAgentForwarding in it. I have tried all of these directives as yes also. debianA and debianB both have identical ssh_config and sshd_config (verified with diff) so the really weird thing is connecting OSX debianB debianA works fine!! Im totally out of ideas! Has anyone come across this before? Cheers! NFV

  Read the article

• GIT Website Deployment

  - by Brian

  I am attempting to setup GIT to deploy my project to different locations based on the branch. (I think this is what I want to do anyway). My current setup is this: Local dev machine running Netbeans to make changes. Remote server hosting GIT projects (same server running apache) - 2 subsites exist a test.FQDN.com and a live.FQDN.com What I would like to do is have 1 GIT project (MyProject) and create a new feature branch. Any commits done to the new feature branch would push to test.FQDN.com. Once the features have been tested and then merged into the master branch, it would push to live.FQDN.com. I have looked at GIT's post-receive hooks and was able to use "git checkout -f" command to pull on the test.FQDN.com site however that only pulls the master branch and not the new feature branch. I do not have any funding to use a third party to make this work, and would prefer to stay within GIT but have full root access to the web server if there is a package to install which would help control this. Any suggestions would be great!

  Read the article

• How can I change the binding order of network adapters in Windows 7?

  - by Chris Farmer

  The end goal here is that I am trying to install an Oracle 10g server on my Windows 7 x64 dev box. I use DHCP, and the Oracle installer is throwing up this warning: Checking Network Configuration requirements ... Check complete. The overall result of this check is: Failed <<<< Problem: The install has detected that the primary IP address of the system is DHCP-assigned. Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP. I have installed the loopback adapter, but I am not sure how to make it the primary network adapter. I see this Microsoft KB article on the subject but it's Windows XP-oriented, and I can't seem to find a comparable one for Windows 7. Some of the options it talks about don't seem to be present in the views of the adapters that I see. So, how can I make the loopback adapter become the primary adapter?

  Read the article

• Files being rolled back on server 2008 R2

  - by Gary

  I've got a weird situation occurring on my dev server. Randomly, and for no reason that I can see, files are being rolled back to an earlier version! This has happened twice now - the first time I assumed I'd done something wrong somewhere, restored the file I was after from a backup and gave it no further thought. The second time, just now, it happened to a folder containing just a few files that I was working on - suddenly all the changes I'd made over the last day or two were gone! (I know, commit more often, ay?). Thankfully I have a daily backup and so have recovered my files, but I'm very concerned about this and need to understand how and why it's happened. The only change made between file states is that I enabled sharing on a completely unrelated folder. I'm developing an app on Railo, which is running on Tomcat. The code was all fine and in c:\websites\appname. I shared the 'Railo' folder, which is c:\railo in order to allow my IDE access to the logs generated by the app (contained in c:\railo\tomcat\logs) and when I reloaded the app, the code was reverted to a few days ago! I'm at a complete loss here. Can anyone point me in the right direction? Thanks.

  Read the article

• NVidia TwinView - slow rendering on dual desktop

  - by lisak

  Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Macvlan based interface pings from host but not from namespace

  - by jtlebi

  My setup: Private network vboxnet1 10.0.7.0/24 1 Host, ubuntu desktop 1 VM, ubuntu server (VirtualBox) Adressing layout: HOST: 10.0.7.1 VM: 10.0.7.101 VM MAC NAMESPACE: 10.0.7.102 On the VM, I ran the following commands: ip netns add mac # create a new nmespace ip link add link eth0 mac0 type macvlan # create a new macvlan interface ip link set mac0 netns mac On the mac namespace, inside the VM: ip link set lo up ip link set mac up ip addr add 10.0.7.102/24 dev mac0 So that we basically end up with: (Like Inception ?) +------------------------+ | Host: 10.0.7.1 | | | | +--------------------+ | | | VM: 10.0.7.101 | | | | | | | | +----------------+ | | | | | NS: 10.0.7.102 | | | | | | | | | | | +----------------+ | | | +--------------------+ | +------------------------+ What works: Ping between Host and VM Ping between NS and NS dhclient from NS What does not work: ping between NS and VM ping between NS and Host Where I started to go nuts: tcpdump on host (the real machine) actually shows ARP request AND replies tcpdump on NS shows ARP requests sent to the host tcpdump on VM makes the whole mess work (!) -- ping starts to get answers when tcpdump is started on the VM ?!? So, I bet you were eager for it, my question is: how to I make it work ? I suspect something's wrong with ARP on the macvlan inside the NS but can't figure out what exactly... Btw, I did the same expérimentations with the mac0 interface directly on the VM (no namespace) and it worked flawlessly.

  Read the article

• OpenVPN access to a private network

  - by Gior312

  There are many similar topics about my issue, however I cannot figure out a solution for myself. There are three hosts. A without a routable address but with an Internet access. Server S with a routable Internet address and host B behind NAT in a private network. What I've managed to do is a OpenVPN connection between A and B via S. Everything works fine so far according to this manual VPN Setup What I want to do is to connect A to Bs private network 10.A.B.x I tried this manual but had no luck. So A has a vpn address 10.9.0.10, B's vpn address is 10.9.0.6 and B's private network is 10.20.20.0/24. When at the Server I try to make a route to Bs private network like this sudo route add 10.20.20.0 netmask 255.255.255.0 gw 10.9.0.6 dev tun0 it says "route: netmask 000000ff doesn't make sense with host route" but I don't know how to tell Server to look for a private network in a different way. Do you know how can I make it right ?

  Read the article

• less maximum buffer size?

  - by Tyzoid

  I was messing around with my system and found a novel way to use up memory, but it seems that the less command only holds a limited amount of data before stopping/killing the command. To test, run (careful! uses lots of system memory very fast!) $ cat /dev/zero | less From my testing, it looks like the command is killed after less reaches 2.5 gigabytes of memory, but I can't find anything in the man page that suggests that it would limit it in such a way. In addition, I couldn't find any documentation via the google on the subject. Any light to this quite surprising discovery would be great! System Information: Quad core intel i7, 8gb ram. $ uname -a Linux Tyler-Work 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux $ less --version less 458 (GNU regular expressions) Copyright (C) 1984-2012 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty

  Read the article

• Strange ssh login

  - by Hikaru

  I am running debian server and i have received a strange email warning about ssh login It says, that user mail logged in using ssh from remote address: Environment info: USER=mail SSH_CLIENT=92.46.127.173 40814 22 MAIL=/var/mail/mail HOME=/var/mail SSH_TTY=/dev/pts/7 LOGNAME=mail TERM=xterm PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 SHELL=/bin/sh KRB5CCNAME=FILE:/tmp/krb5cc_8 PWD=/var/mail SSH_CONNECTION=92.46.127.173 40814 my-ip-here 22 I looked in /etc/shadow and find out, that password for is not set mail:*:15316:0:99999:7::: I found this lines for login in auth.log n 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): getting password (0x00000388) Jun 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): pam_get_item returned a password Jun 3 02:57:09 gw sshd[2091]: pam_winbind(sshd:auth): user 'mail' granted access Jun 3 02:57:09 gw sshd[2091]: Accepted password for mail from 92.46.127.173 port 45194 ssh2 Jun 3 02:57:09 gw sshd[2091]: pam_unix(sshd:session): session opened for user mail by (uid=0) Jun 3 02:57:10 gw CRON[2051]: pam_unix(cron:session): session closed for user root and lots of auth failures for this user. There is no lines with COMMAND string for this user. Nothing was found with "rkhunter" and with "ps aux" process inspection, also there is no suspicious connections was found with "netstat" (as I can see) Can anyone tell me how it is possible and what else should be done? Thanks in advance.

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . Thanks.. Ian

  Read the article

• how do I fix a wrong UUID in grub.cfg?

  - by mozerella

  I run Debian Wheezy alone on my PC and I recently copied the root partition to another with rsync as I found that worked well (I also know about dd and ddrescue but they leave unusable space on the new partition). I generated a new random UUID for the new partition with sudo tune2fs -U random /dev/hda9 and also updated fstab / and /home entries. Then as I know so little about GRUB I used a gui (GRUB Customizer) to probe for the new OS and add an entry to GRUB and the MBR -it makes an /etc/grub.d entry then updates GRUB. On startup, the GRUB list contains the new OS (on sda9) but it boots the first OS (which I copied from -sda5). /boot/grub/grub.cfg contains the new debian OS but it looks like this set root='(hd0,msdos9)' search --no-floppy --fs-uuid --set=root 64662470-0e58-4dfd-90ac-43227d773556 linux /boot/vmlinuz-3.2.0-2-amd64 root=UUID=cc3bca0d-aee4-4b9c-95c2-57212cc36d4d ro quiet initrd /boot/initrd.img-3.2.0-2-amd64 the 1st uuid is of sda9, but the 2nd uuid there is of sda5. I can change the 2nd uuid at startup (with E) and it boots sda9. So how can I get grub.cfg corrected so that the sda9 GRUB list entry boots from sda9 permanently?

  Read the article

• krenew command not working : Permission Denied

  - by prathmesh.kallurkar

  I am using a Linux server to perform my simulations. The login and the file-system of the server are protected using kerberos. The file-system is supported using NFS. Since my simulations take a lot of time to run, my ssh sessions used to hang regularly. So, I have started running my simulations in byobu (similar to screen). In order to make sure that my kerberos session remains active, I am using the krenew command. I have entered the following command in my .bash_profile file. (I am sure that it is called for every login) killall -9 krenew 2> /dev/null krenew -b -t -K 10 So everytime I ssh to the server, I kill the existing krenew command. Then, I spawn a new krenew command -b (which runs in background), -t (I forgot why I was using this option !), and -K 10 (It must run after every 10 minutes and refresh the kerberos cache). When I run the simulations, It runs for 14 hours and then suddenly, I am getting error for reading file Permission Denied Is the command that I am running incorrect ??

  Read the article

• Same native and tagged vlan possible on Redhat?

  - by Chris Phillips

  Hi guys and gals, I'm looking at implementing a systems using a number of tagged and a native vlan connected to a server over a a/p bonded interface. The untagged vlan is for physical machine access, the tagged vlans are connected to bridges and then to QEMU VM's inside the machine. Hopefully this plan is fine, but I'm trying to implement a crippled version of this in a dev environment due to a lack of underlying network config in this location where I just have the same single vlan delivered to the machine on a tag AND plain. I'm nto clear if this is going to work (and that I should just be confident that it will work using different vlans) as I'm seeing odd things like a vm is arping out over the vlan out to the core switch, but the arp reply is coming back on the untagged interface. Now an ARP reply is unicast right? So it's a deliberate thing to send the ARP response on the untagged interface, and not a case that a broadcast response isn't being passed on the tagged side... i.e. there's some underlying logic pushing it that way. Something about the MACs somehow? This is on a CentOS 5.5 machine, vlan's from vconfig. (I've seen reference to the Linux mac-vlan project work, but that's not available here by default.) so 1) Should having the SAME vlan tagged and untagged work? 2) Will different tagged vlans to the untagged interface work nice and easily?

  Read the article

• Audio server with best API?

  - by Wintermute

  I'm a web dev, working in a small studio with a couple of other devs and some crayon-munchers (or, "designers"). Like all the best and trendiest creative studios, we have tunes. Our tunes consists of a set of speakers that whoever wants to can plug into their machine, and DJ their little socks off via iTunes, Spotify, VLC or whatever their music player of choice happens to be. Obviously, this lacks finesse. What we WANT is this: a single, dedicated machine running some sort of audio player (ideally Win-based, but a Linux flavour isn't impossible), that exposes an API. We (ie: me and the other devs) want to write a web-based client onto it, that'll let us remotely do all sorts of funky stuff like generating on-the-fly genre-based playlists, and voting for tracks, and making tea. My question - and please forgive me if this isn't the place for such a question, I was going to ask on Stackoverflow but that didn't seem right either - is this: what's the best player to start with? What can do all of this? I know VLC can function as a streaming server, but know nothing of any API it may have. I'd rather chop my pinky off than use iTunes, but if it does what we want, then... Anyhow, thanks for reading. All comments and suggestions gratefully received.

  Read the article

• How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

  - by Todd V. Rovito

  I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

  Read the article

• backup an existing linux server to a virtualbox virtual machine

  - by user146526

  I have some servers and VPSs to many companies across the world. I want to back them up locally. I have some backup solutions enabled to remote hosts, but I want to have a local backup on a computer at home. What I am thinking is: 1) Create a virtualbox virtual machine, install the same version linux as the server. 2) Use rsync to backup the server to the local virtualbox machine. (something like rsync -av --delete --progress --exclude '/dev/' --exclude '/proc/' root@server_ip:// / ) 3) Repeat the command every few days update files. 4) In case of a hard disk failure, or any other bad event, reverse the rsync command and get the files back and continue my bussiness. I tried it with 2 openvz VPS, the one was a backup of the other. I also tried to transfer normal linux server host to openvz machine and it worked great. That way looks pretty clean and easy to me, this is the kind of solution I am looking for. However I need to be sure that this will work if I am going to do it. The question is, will that work ok ? Does anyone see any problem with that ? Do you have any other suggestions ? Thanks

  Read the article

• How to make quicksilver remember custom trigger

  - by corroded

  I am trying to make a custom trigger for my shell/apple script file to run so I can just launch my dev environment at the push of a button. So basically: I have a shell script(and some apple script included) in ~ named start_server.sh which does 3 things: start up solr server start up memcached start up script/server I have a saved quicksilver command(.qs) that opens up start_server.sh(so start_server.sh, then the action is "Run in Terminal") I created a custom trigger that calls this saved qs command. I did that then tested it and it works. I then tried to double check it so I quit quicksilver and when I checked the triggers it just said: "Open (null)" as the action. I set the trigger again and when i restarted QS the same thing happened again. I don't know why but my old custom trigger to open terminal has worked since forever so why doesn't this one work? Here's a screenie of the triggers after I restart QS: http://grab.by/4XWW If you have any other suggestion on how to make a "push button" start for my server then please do so :) Thanks! As an added note, I have already tried the steps on this thread but to no avail: http://groups.google.com/group/blacktree-quicksilver/browse_thread/thread/7b65ecf6625f8989

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >