Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 376/594 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

• Automatically connect to 3G dialup connection

  - by Philipp

  I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

  Read the article

• netsh advfirewall firewall

  - by lehn0058

  I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

  Read the article

• Google Chrome passphrase : where is it?

  - by danielson

  Every time I do a fresh install, Google Chrome asks me for my passphrase. Have searched high and low in Google's help forum and have yet to receive or find any form of response. When I do a fresh install, if I try to enter the passphrase (with all possible passwords i can recall) nothing works and I can't recover my extensions, bookmarks etc. On the other hand, if I wait a bit, everything falls to place. I close that window asking for passphrase and all my extensions, bookmarks are back. The failure to enter a proper passphrase code gets me a message to change my passphrase in my account settings. Who knows where that is! No one at Google's forum seems to know anything about this "passphrase".

  Read the article

• How can I disable the beep when I plug in/unplug my laptop's AC adapter?

  - by Dunaril

  My Packard-Bell laptop is emitting a loud, annoying beep when I connect or disconnect it to/from an AC power source. Whether I have headphones plugged in or not does not change anything; the sound goes out of the speakers and wakes everyone up. Do you know of any ways to eliminate this sound? I searched around the Internet and found a solution involving setting a specific volume bar to 0 in the playback settings, but I did not find it on my laptop. I am using Windows 7.

  Read the article

• Unable to see some Russian id3 tags in ncmpc

  - by ??????? ???????????

  I'm running urxvt with the current env: $ env | grep LC LC_ALL=en_US.UTF-8 The problem is either with ncurses or ncmpc and I was wondering if anyone could shed some light on what the problem might be. This could also be an issue with the ID3 tags and any advice on working with broken or misconfigured encoding settings in meta tags in mp3 files is also welcome. I have been ignoring this matter for years and it has finally gotten to me. The bizarre thing is that some filenames or tags work, while others do not. What I have tried the following: setting LC_ALL to these values (whatever is before the space) ru_RU.KOI8-R KOI8-R ru_RU.UTF-8 UTF-8 ru_RU ISO-8859-5 rebuilding the MPD database with id3v1_encoding "ISO-8859-1" or id3v1_encoding "UTF-8" I can demonstrate the problem with two screen shots, as it's the easiest way to do so: Expected output (mpc works well): Broken encoding (ncmpc):

  Read the article

• Intermittent apt-get 'no installation candidate' error on fabric deploy

  - by jberryman

  I'm experiencing a strange issue with a fabric script I'm using to bootstrap a server on EC2. I launch a stock Ubuntu 12.04 AMI, wait for it to start, then proceed with: with settings(host_string="ubuntu@%s" % i.dns_name, connection_attempts=30): sudo('apt-get -qy update') sudo('apt-get -qy install --no-install-recommends mdadm') # don't install postfix #etc... The apt-get update appears to run fine and gives no errors, however (2/3 of the time or so) installing mdadm throws a "no installation candidate" error. When I ssh into the server and run apt-get install mdadm I get the same error. Running apt-get update by hand, then the package installs fine. Any ideas on what might be happening, or ideas for debugging?

  Read the article

• Two users using the same same user profile while not in a domain.

  - by Scott Chamberlain

  I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

  Read the article

• VPN service for 4in6

  - by Deshene

  I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings).

  Read the article

• In 2011, what are the reasons to stick with plain text mails?

  - by Aaron Digulla

  People entering college today have never known a world without an Internet. HTML was invented 1980, that's more than thirty years ago or 1.5 generations. But plain text mails are still common despite all their problems: Encoding issues Wrapped code segments No links No way to use the "a picture says more than a thousand words" lore Most of the security risks are now handled by the underlying browser engine and smart settings like: Don't allow JavaScript in mails Don't execute attachments Don't download external resources (like web bugs) On top of that, only very few people still read mail only in command line tools like Mutt. Knowing Mutt myself, I'm pretty sure you can configure it to display HTML mail with, say, w3m. On top of that, most HTML mail capable clients send two versions of the mail (pure text with an HTML attachment). I'm not sure if there are any people left on the planet which still use a 56kbit modem to access their mail accounts. So what reasons are left to stick with plain text mails in 2011?

  Read the article

• Vmware server: Browser does not load user interface

  - by matnagel

  I have the latest vmware server isntalled on ubuntu 8.04 lts 64 bit. I access the user interface over this url, which matches my ip and port settings: https://10.1.1.99:11222/ui Sometimes it works in fierofox 3.6, but sometimes not. Same in Google Chrome. When it does not work, what happens is that the cert is checked, the browser is loading something, but the result is a white page. Sometimes the favicon of vmware (blue with 3 squares) appears, but only the white page. And sometimes it works. I reload many times, most of the time the whit epage appears again. On some days I succeed. But on many days not. I can give more info if someone tells me what is needed. Please help, we need this badly.

  Read the article

• Error 1069 the service did not start due to a logon failure

  - by Si

  Our CruiseControl.NET service on Win2003 Server (VMWare Virtual) was recently changed from a service account to a user account to allow for a new part of our build process to work. The new user has "Log on as a service" rights, verified by checking Local Security Settings - Local Policies - User Rights Assignment, and the user password is set to never expire. The problem I'm facing is every time the service is restarted, I get the 1069 error as described in this questions subject. I have to go into the properties of the service (log on tab) and re-enter the password, even though it hasn't changed, and the user already has the appropriate rights. Once I enter the password apply the changes, a prompt appears telling me that the user has been granted log on as a service rights. The service will then start will no problems. Not a show stopper, but a pain none-the-less. Why isn't the password persisting with the service?

  Read the article

• AWS:EC2:: Could not connect FTP client?

  - by heathub

  My Server OS: Amazon Linux I am trying to set up ftp. I have: Installed vsftpd open port 20-21 open port 1024 - 1048 Basically, I followed every of these steps Start vsftpd service (the status indicate [ok]) I use filezilla for my ftp client. Here is my setting/configuration: Host: ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Port: -(blank, but I have tried 20 and 21 though) Server Type: FTP - File Transder Protocol Logon Type: Normal Username: (tried root and ec2-user) Transfer mode: Tried passive and active I always has this error: Status: Waiting to retry... Status: Resolving address of ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Status: Connecting to XX.XX.XXX.XX:21... Error: Connection timed out Error: Could not connect to server Have I missed any configuration/settings? EDIT After execute the /sbin/iptables -L -n Here is the result: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• Windows 7: enabling navigation of subfolders in pinned Start Menu folders

  - by AspNyc

  I'm just about to move from Windows XP to Windows 7, and I'm struggling with some of the interface changes. In XP, I was able to throw a folder intoC:\Documents and Settings\username\Start Menuand have it appear on the Start Menu, complete with the ability to navigate through subfolders. I've figured out how to pin a folder onto the Start Menu in Windows 7, which required a registry hack. However, I am unable to view the subfolders of the pinned folder without opening a new Windows Explorer window. Is there any way to replicate the old XP behavior I'm used to? I'd like to be only a single click away from these handful of application links and folders, since I use them all the time throughout the day.

  Read the article

• 500 Internal Server Error after moving Joomla installation to new environment

  - by rad

  (This is the first time I moved the website so please don't be hard on me.) After moving the website, the homepage shows up properly but other pages do not. I get 500 Internal Server Error on all other pages. Before moving, the Search Engine Friendly URLs and Use URL rewriting were enabled in the Joomla Dashboard. Is this the reason the other pages are not showing up? If so, how do I fix this? I think the homepage shows up because the url myWebsite.com redirects to myWebsite.com/index.php automatically. Note that I have transferred all of the Joomla the files through Filezilla and imported the MySQL database properly and also edited the configuration.php as set the proper settings for the database.

  Read the article

• how to set global PATH on OS X?

  - by lajos

  I'd like to append to the global PATH variable on OS X so that all user shells and GUI applications get the same PATH environment. I know I can append to the path in shell startup scripts, but those settings are not inherited by GUI applications. The only way I found so far is to redefine the PATH environment variable in /etc/launchd.conf: setenv PATH /usr/bin:/bin:/usr/sbin:/sbin:/my/path I coulnd't figure out a way to actually append to PATH in launchd.conf. I'm a bit worried about this method, but so far this is the only thing that works. Does anyone know of a better way?

  Read the article

• Remote execution in Workgroup network

  - by ayyob khademi

  Consider this scenario: Please don't say that it would be better if I created a Domain network; Just consider this scenario. 10 PCs are all interconnected via a switch to a workgroup network named WORKGROUP; PCs specs(all are the same): Windows XP SP2 en (build:2600.xpsp_sp2_rtm.040803-2158) I have full physical control over my own PC (one of those 10 PCs) and what I know about the other ones: IPs of all 10 PCs. Administrator account name of all 10 PCs. Administrator account password of all 10 PCs. How can I execute an application on the other PCs???(without touching them) How can modify their registry settings???(without touching them)

  Read the article

• Force Windows 8 to search indexed files

  - by Hrvoje

  When using search files in Windows 8 (win+f) I don't get expected results. For example, I installed VLC, it's in Program Files (86) folder, and that folder is selected for indexing. Search for files (win+f) gives 0 results. If I pin to start that exe, then it's found - but I don't want to do this, that's not the point. Where does it search for files? Is there any way to specify search locations? It doesn't use Indexing Options settings, at least it seams so. Also, searching from explorer window is kinda slow - I tried entering VLC.EXE in search box (when in c:\ root), and it takes some time to give correct results. It works, but it looks like it doesn't use indexing, rather scan all files/folders, which is slow.

  Read the article

• How to force 640*480@60Hz screen resolution on xubuntu 12.04

  - by c2h2

  It seems xubuntu won't be able to correctly set resolution at 640*480@60Hz at its Display settings. And I am unable to correctly my super small 6.4 inch Mitsubishi VGA panel via VGA cable. I have tried to hack both X11 conf /etc/X11/Xorg.conf and xfce4 conf, but all the document I can find is outdated. and conf files are changed into other location. Can someone give me a hand and I'll mark correct for other people to use? Thanks! EDIT: The board is an Intel Atom D2700, gpu is SGX545. I tried to use xrandr --output default --mode 640*480 It seems works fine, but refresh rate is 75Hz, but the screen only suports 60Hz So I used xrandr --output default --mode 640*480 --rate 60 but it give error: xrandr: Failed to get size of gamma for output default Can anyone pointing any directions?

  Read the article

• IIS: Content-Length 0 for CSS, Javascript and Images

  - by Adrian Grigore

  After a clean re-installation of my Windows 7 system, I can't get IIS 7 to properly deliver any static content. Dynmic content (ASPX pages and content served by ASP.NET MVC controllers) works fine, but static files such as CSS, Javascript and Images give me a 200 OK status code and a Content-Length of 0. The problem occurs with all web sites on my server, even a brandnew ASP:NET MVC template project with no changes. It also occurs with both Firefox and IE 8. What could possibly be the problem? Note that I also installed the latest Windows Azure SDK, perhaps that messed up some settings. But I don't know how to proceed with for troubleshooting this.

  Read the article

• Unable to connect to remote MS SQL Server 2008 Express SP3 instance by name

  - by Max

  I am trying to connect to a remote MS SQL Server 2008 SP3 x86 Instance using it's name. At the first glance all seems to work well (e.g. it is possible to connect to the server locally and succesfully telnet it's port remotely), but there is a thing I can't understand... This line should connect us to the default instance of remote SQL Server: osql -S ServerIP -d MyDatabase /U sa -P MyPassword and it does the trick, however the next one: osql -S ServerIP\MyInstance -d MyDatabase /U sa -P MyPassword ends up with the following error: [SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The only instance running on the server is MyInstance, which is (I guess) the default one. Could you please put some time in explaining the issue.

  Read the article

• Cannot add Windows 7 client to SBS 2008

  - by Sandokan

  I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

  Read the article

• Nothing is written in php5-fpm.log

  - by jaypabs

  I have two servers which is Ubuntu 12.04 and Ubuntu 14.04. When I use Ubuntu 14.04 in my new server and enabled the php-fpm log file found under /etc/php5/fpm/php-fpm.conf that reads as follows: error_log = /var/log/php5-fpm.log I noticed that most of the log that I found in Ubuntu 12.04 is not written in 14.04. For example, if I restart php5-fpm in my Ubuntu 12.04, a restart log is being written, however, this does not happen in 14.04. Another log which I missed in 14.04 are the following: [23-Aug-2014 16:23:03] NOTICE: [pool web42] child 118098 exited with code 0 after 12983.480191 seconds from start [23-Aug-2014 16:23:03] NOTICE: [pool web42] child 147653 started [23-Aug-2014 17:27:31] WARNING: [pool web8] child 76743, script '/var/www/mysite.com/web/wp-comments-post.php' (request: "POST /wp-comments-post.php") executing too slow (12.923022 sec), logging I really wanted to have this kind of log so I will know the length of time a slow script has executed. Does anyone know if there are other settings in Ubuntu 14.04 that I need to change in addition to /etc/php5/fpm/php-fpm.conf?

  Read the article

• How to bypass Forefront TMG for downloading from Adobe Cloud

  - by user1006272

  I hope that this question has not been asked as I've spent a couple of days googling around trying to find a solution. I have one computer that needs to download from Adobe Cloud to install applications like Photoshop etc... The issue I'm having is that Adobe uses a download manager program (AdobeApplicationManager.exe) that just keeps incrementing the time left on the download of any app like Photoshop. Is there a way to allow just the download manager from that one computer to bypass any filtering settings in Forefront TMG 2010? I have very little knowledge of servers / ISA servers / Forefront TMG and have been thrown into this position by luck I guess. Any help with this would be highly appreciated. Thanks in advance.

  Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >