Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 377/551 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

• Linksys Router/Tomato Firmware DNS issues

  - by jasonh

  I've got a WRT54GS that I've loaded the current version of Tomato onto. I entered static DHCP addresses in for the devices on my network, released and renewed the address on my desktop and tried to ping another computer. All I got was The request could not find host blah. Please check the name and try again. Now, I verified that my desktop and the target machine I'm trying to ping have both received their proper static DHCP lease and that their DNS server is the IP address of my router. What am I missing?

  Read the article

• How to add authentication to ssh dynamic port forwarding?

  - by Aalex Gabi

  I am using ssh as a SOCKS server by running this command on the server: ssh -f2qTnND *:1080 root@localhost There is one problem: anybody can connect to the server and use it's internet connection. Options: To use iptables to filter access to the server, but I connect to the server from various non-statically allocated IP addresses so I would have to edit very frequently those filters which can be annoying. To install a SOCKS server on the remote. Ultimately this is the last option if there is no other simpler way to do it. (I am very lazy) Launching the same command on clients machines. The problem here is that some clients don't run on Linux and it is awkward to set up the tunnel (Windows + Putty). Is there a way to add authentication to a SOCKS server made using ssh? Bonus question: How to add encryption between the client and the server (made using ssh)?

  Read the article

• loadbalancing with difference nginx location context and backend server context

  - by robinmag

  Hi, I used nginx and upstream module for load balancing with the following config upstream lb { server 127.0.0.1:8080; server 127.0.0.1:8081; } server { listen 88; server_name localhost; location /cas/ { proxy_pass http://lb; proxy_redirect off; proxy_connect_timeout 2; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } the problem is the "location /context/" have to match to the context of backend server so when i request localhost/context/index.html then nginx routes it to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html. Is it possible to have difference backend context and nginx location for example with "location /" nginx will routes the request to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html Thank you.

  Read the article

• AWS EC2 security group source

  - by greener

  I'm currently trying to configure a security group and allow MS SQL connections from my other instance. I want to be able to specify the security group's name as the source. But the connection is not going through. The instance's firewall has a rule to allow connections on the port. In fact, if I specify the IP of the machine as the source, it works. Just not the security group name. There are two other rules for the same port and they're for specific IPs only. What am I doing wrong?

  Read the article

• Why did my Cisco router hang?

  - by Mike Pennington

  We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

  Read the article

• SNMP based network discovery (switches), device (ports on switches) power management

  - by SaM

  In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

  Read the article

• Setting up a wireless access point with Ubuntu server

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

  Read the article

• How can I tell which interface my Supemicro IPMI is piggybacking on?

  - by lorin

  I've used IPMI before, but only on servers where the IPMI interface had a dedicated ethernet port. I've got an Ubuntu 10.04 server with two ethernet cards, which is supposed to have an IPMI interface on it (the motherboard is a Supermicro H8DMR-I2). From what I understand, the IPMI interface is piggybacking on one of the two NICs. Is there any way I can tell which NIC the IPMI interface is piggybacking on? Using ipmitool I've tried to set the IP address on the IPMI interface for the subnet for eth0, and then the subnet for eth1, and it's never reachable. (Can you even reach an IPMI interface from the same NIC it's piggybacking off of, or do you need to try connecting from a different machine on the network?) Also, is there anything special I need to do to enable it? I can access the IPMI interface locally using "ipmitool".

  Read the article

• nginx: server_name and server_addr wrong with reverse proxy in front of it

  - by user41356

  I have stunnel in front of nginx in order to handle ssl. (I'm aware that nginx can handle ssl, but I'm migrating off nginx and this is a necessary step.) Stunnel and nginx are running on the same box. Without stunnel in front of nginx, nginx got the server_addr and server_name as the public ip of the box and the domain of the url I was fetching, respectively. Now with stunnel, nginx thinks the server_addr and server_name are 127.0.0.1 and localhost respectively. This is screwing up a bunch of things. How can I make nginx get (or stunnel send) the correct server_addr and server_name?

  Read the article

• Running hardware with only 32bit drivers in 64bit windows

  - by Howard

  Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

  Read the article

• customErrors="RemoteOnly" not working properly in Server 2008

  - by Atomiton

  It would appear that on my brand new Windows Server 2008 with IIS7, customErrors is not working. We have customErrors set to RemoteOnly in the web.config on our Asp.Net sites and applications. However, no matter what we do, it would appear that our sites act like it's set to On and we can't get any detailed messages showing up on our applications when remoted into our servers. I'm not entirely sure how to trace where this is being overrided, or if there is something in the way the server is configured that would make the server think the request is internal? How does this actually resolve correctly, anyway? Any help is appreciated... Our network admin has added domains to our hosts file to direct applications to the IP address.

  Read the article

• pfSense command to delete stale SAD

  - by Justin Shin

  I'm experiencing an issue with pfSense where duplicate SAD's are getting created after rekeying, forcing me to manually go ahead and delete the old SAD's. It's not a huge issue but it does get to be a problem once I let it go for a few days. I just installed the cron package for pfSense so I could run a script to identify stale SAD's and delete them but I am not that familiar with BSD or pfSense. Is there a command that enumerates SAD's and their properties, and another that can delete by ID? I can form the conditional parts of the script but I do not know the commands to run. I would imagine it would be something like: Enumerate SAD's Identify Duplicate ones by matching Source and destination IP's Find the one with the larger bytes transferred Delete

  Read the article

• Site stopped working after adding NIC card

  - by Sachin Kainth

  My boss made a bit of blunder yesterday, he added a secondary NIC card to the a machine hosting a website so that it could be part of the local network. He also added it to the <blah>.local domain (which all our servers are being added too). The website failed following this. He thought this was because the machine was now called <blahblah>.<blah>.local, so he removed it from the domain and restarted. Same problem a asp.net error, something to do with a binding error. Sorry he didn’t make a note of it. He traced it back to the WCF services that are running on the site. Anyway, it looks like ASP.NET gets confused connecting to the database when there’s multiple network cards. The 173.x.x.x IP address (which is internal), doesn’t route to the internet.. Therefore it’s trying to connect via the wrong network. Any ideas about how to resolve it?

  Read the article

• Missing "log on to" field in Windows 2008 password change dialog

  - by Dmitri Chubarov

  I have to setup an embedded standalone CIFS server outside of domain environment. I shall refer to the server as storage_gateway. The default password setting for the Administrator account is Password must be changed. Until Administrator password is changed other local accounts are disabled. While the server is on default password connecting to a share causes fails with NT_STATUS_PASSWORD_MUST_CHANGE error. $ smbclient -L //storage_gateway -U Administrator session setup failed: NT_STATUS_PASSWORD_MUST_CHANGE I have a mixed Linux/Windows environment and prefer smbclient for diagnostics. To change the password in Windows 2003 Server I could press CTRL-ALT-DEL to get into the Windows Security window and change password for the remote server specifying the server name or ip address (xx.xx.xx.xx) in the system password change dialog. (the name root is just an example, I have edited the dialogs to translate them) However in Windows 2008 the corresponding dialog lacks the Log on to field. Is there a way to change a remote password in Windows 2008 Server/Windows 7?

  Read the article

• multiple wildcard entries

  - by Murali

  my client has around 300,000 domains and they just have a wildcard for all of them * A 12.12.12.12 Now they want to create a sub domain that points to a different IP and still have the flexibility of wildcard, something like ww1.* A 24.24.24.24 * A 12.12.12.12 Looks like in BIND, the lower "*" is catch-all and taking over every query and hence ww1 is not working. One of solutions offered by IT folks was to create seperate 300K zones for just "ww1" and leave the "*" wildcard. Are there any other DNS software's that can achieve this task easily? Any other ways to deal?

  Read the article

• inconsistent ERRORLEVEL in a batch file

  - by Doron

  In a batch file, I have an inconsistent errorlevel behavior: The IP address 10.1.1.2 always replies. The following code always gives errorlevel 0 in one location (somewhere in the middle - exactly where i need it) inside the batch file. I copied only this snippet and placed it in the beginning and at the end of the batch file. In those locations, the result is always 1. Here is the code snippet: ping 10.1.1.2|Findstr /I /C:"timed out" /C:"host unreachable" echo %errorlevel% Any idea how to make it work also in the middle of the file? What am I doing wrong? I would hate to solve it with GOTOs(to the end of the file and back to where I need the result.)

  Read the article

• Why can't I change the domain when connecting to network shares in Windows 8?

  - by Nathan Osman

  I have a computer running Windows 8.1 Pro. I also have Ubuntu 12.04.3 Server running within Hyper-V on the same machine. The Ubuntu server has Samba installed. Both the host and guest OS are connected to the workgroup WORKGROUP. When I open up "Network" in Windows 8.1 and attempt to connect to the server (both by name and IP address), I receive the following prompt: Entering the correct username and password for an account on the server fails. /etc/samba/smb.conf has the following share definitions set: [homes] comment = Home Directories browseable = no

  Read the article

• loadbalancing with difference nginx location context and backend context

  - by robinmag

  Hi, I used nginx and upstream module for load balancing with the following config upstream lb { server 127.0.0.1:8080; server 127.0.0.1:8081; } server { listen 88; server_name localhost; location /cas/ { proxy_pass http://lb; proxy_redirect off; proxy_connect_timeout 2; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } the problem is the "location /context/" have to match to the context of backend server so when i request localhost/context/index.html then nginx routes it to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html. Is it possible to have difference backend context and nginx location for example with "location /" nginx will routes the request to 127.0.0.1:8080/context/index.html or 127.0.0.1:8080/context/index.html Thank you.

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• Server Configuration / Important Parameter for 500Req/Second

  - by Sparsh Gupta

  I am configuring a server to be used as nginx server for a very heavy traffic website. It is expected to receive traffic from a large number of IP addresses simultaneously. It is expected to get 500Req/Second with atleast 20Million unique IPs connecting it. One of the problems I noticed in my previos server was related to iptables / ipconntrack. I am not aware of this behaviour and would be glad to know which all parameters of a ubuntu / debian (32/64) bit machine should I tweek to get maximum performance from the server. I can put in a lot of RAM on the server but mission critical task is the response times. We ideally dont want any connection to be hanging / timing out / waiting and want as low as possible overall response times. P.S. We are also looking for a kick ass freelancer system admin who can help us figuring / setting this all up. Reach me incase you have some spare time and interested in working on some very heavy traffic website servers.

  Read the article

• Reliable cheap or free DNS service?

  - by superwormy

  I'm looking for a reliable free or cheap DNS service. I've used FreeDNS at FreeDNS.Afraid.org in the past, but it doesn't always seem reliable... sometimes people say they can't access my website (sometimes I can't access it either) by domain name, and yet if I type in the IP address it works fine, so I assume it's some sort of DNS problem. Are there any other cheap or free DNS services out there? I need something reliable that I can manage via a web interface (or scripts if they have an API) that I can use to manage the DNS for ~100 domain names. EDIT: To be clear, I'm looking for DNS hosting, not DNS servers to use for my WAN connection.

  Read the article

• Embedded Net DVR camera1 failed to start preview!

  - by user44212

  I am gettig the following error as "Embedded Net DVR camera1 failed to start preview!" when we are trying to login and view the preview of the cameras on the DVR 8116HCI-S Standalone. There is an IP Address assigned to the same via which we access the same. I checked the site for information here http://www.hikvision.com/en/Products_show.asp?id=32. But could not find any useful information relating to the error message. We can access the same via login in from one machine but we are not able to access it from more than one machine.

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• Setting up Splunk/IronPort WSA

  - by Ciddan

  I recently stumbled across Splunk 4 (by way of an advert on this very site...) and found that it had an "App" that's designed to work with Cisco IronPort WebSecurity and E-Mail Appliances! That's really awesome, because good IronPort reporting is something our IT-dept. is looking for. Anyways - I'm totally lost on how to configure this thing. I've googled like a mad-man to find a guide or such like - but I haven't found anything. Has anyone here set up IP / Splunk? Any tips/pointers?

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >