Search Results

Search found 40745 results on 1630 pages for 'type inference'.

Page 379/1630 | < Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >

• Cisco VPN Client Behind ASA 5505

  - by fdf33

  I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

  Read the article

• Content Container Overlaps Menu?

  - by Harold

  I'm currently working on a Joomla template using CSS divs. I have a header set up with our logo image in a div floated to the left, an adspace floated to the right, and the menu bar on the bottom. My content is divided into three div columns that are contained in "container.": the left column is floated left, the center is not floated, and the right is floated to the right. The problem is the "container" for the three content divs is overlapping the menu, as you can see in this image: http://www.ndpstudentcouncil.org/images/shot1.png Here's the HTML code: > <body> <div id="backdrop"> <div > id="wrapper"> <div id="header"> > <div id="topimage"> </div> > <div id="adspace1"><jdoc:include > type="modules" name="Ad Space #1" /> > This will be the location for our > "newsflash" items. </div> > > <div id="ddtopmenubar" > class="mattblackmenu"> > <ul> > <li><a href="http://www.ndpstudentcouncil.org">Home</a></li> > <li><a href="http://www.dynamicdrive.com/new.htm" rel="ddsubmenu1">DHTML</a></li> > <li><a href="http://www.dynamicdrive.com/style/" > rel="ddsubmenu2">CSS</a></li> > <li><a href="http://www.dynamicdrive.com/forums/">Forums</a></li> > <li><a href="http://tools.dynamicdrive.com/" > rel="ddsubmenu3">Web Tools</a></li> > </ul> > <script type="text/javascript" src="js/ddlevelsmenu.js"> > ddlevelsmenu.setup("ddtopmenubar", "topbar") > //ddlevelsmenu.setup("mainmenuid", > "topbar|sidebar") > </script> > <ul id="ddsubmenu1" class="ddsubmenustyle"> > <li><a href="#">Item 1a</a></li> > <li><a href="#">Item 2a</a></li> > <li><a href="#">Item Folder 3a</a> > <ul> > <li><a href="#">Sub Item 3.1a</a></li> > </ul> > </li> > <li><a href="#">Item 4a</a></li> > <li><a href="#">Item Folder 5a</a> > <ul> > <li><a href="#">Sub Item 5.1a</a></li> > <li><a href="#">Item Folder 5.2a</a> > <ul> > <li><a href="#">Sub Item 5.2.1a</a></li> > <li><a href="#">Sub Item 5.2.2a</a></li> > </ul> > </li> > </ul> > </a> > </li> > <li><a href="#">Item 6a</a></li> > </ul> </div> </div> > <div id="container"> <script language="javascript"> > matchHeight=function(){ > var divs,contDivs,maxHeight,divHeight,d; > // get all <div> elements in the document > divs=document.getElementsByTagName('div'); > contDivs=[]; > // initialize maximum height value > maxHeight=0; > // iterate over all <div> elements in the document > for(var i=0;i<divs.length;i++){ > // make collection with <div> elements with class attribute > 'container' > if(/\bcontainer\b/.test(divs[i].className)){ > d=divs[i]; > contDivs[contDivs.length]=d; > // determine height for <div> element > if(d.offsetHeight){ > divHeight=d.offsetHeight; > } > else if(d.style.pixelHeight){ > divHeight=d.style.pixelHeight; > } > // calculate maximum height > maxHeight=Math.max(maxHeight,divHeight); > } > } > // assign maximum height value to all of container <div> elements > for(var i=0;i<contDivs.length;i++){ > contDivs[i].style.height=maxHeight; > } > } > // execute function when page loads > window.onload=function(){ > if(document.getElementsByTagName){ > matchHeight(); > } > } > </script> <div id="left"> > <jdoc:include type="modules" name="left" /> </div> <div > id="middle"> > <jdoc:include type="component" /> </div> <div id="right"> > <jdoc:include type="modules" name="right" /> > </div> > </div> > <div id="footer" class="clear"><jdoc:include > type="modules" name="footer" /> > &copy; 2010 NDP Student Council<br > />Website Development Subcommitee > </div> </div> </div> </body> The CSS: > #backdrop { width:100%; height:100%; background: #FFFFFF > url(../images/gradient.jpg) repeat-x; > } > > #wrapper { margin:auto; width:95%; height:95%; border-right:thick solid > black; border-bottom:thick solid > black; border-top:thick solid black; > border-left:thick solid black; > background-color:white; } > > #header { height:131px; width:100%; background-color: #FFFFFF; > border-bottom:thick solid black; } > > #topimage { float:left; height:131px; width:63%; > background-image: > url("../images/ndps2.png"); > background-repeat:no-repeat; } > > #adspace1 { float:right; width:27%; height:131px; } > > #container { clear:both; } > #left{ width:20%; float:left; padding:5px; text-align:center; } > > #middle{ width:60%; padding:5px; text-align:center; } > > #right{ float:right; width:20%; padding:5px; text-align:right; } > #footer { border-top:thick solid black; width:100%; > text-align:center; } .clear { > clear:both; } Here is the CSS for the menu itself, which is from DynamicDrive.com: > .mattblackmenu ul{ margin: 0; padding: > 0; font: bold 12px Verdana; > list-style-type: none; border-bottom: > 1px solid gray; background: #414141; > overflow: hidden; width: 100%; > clear:both; } > > .mattblackmenu li{ display: inline; > margin: 0; } > > .mattblackmenu li a{ float: left; > display: block; text-decoration: none; > margin: 0; padding: 6px 8px; /*padding > inside each tab*/ border-right: 1px > solid white; /*right divider between > tabs*/ color: white; background: > #414141; Thanks for the help!

  Read the article

• Custom Lookup Provider For NetBeans Platform CRUD Tutorial

  - by Geertjan

  For a long time I've been planning to rewrite the second part of the NetBeans Platform CRUD Application Tutorial to integrate the loosely coupled capabilities introduced in a seperate series of articles based on articles by Antonio Vieiro (a great series, by the way). Nothing like getting into the Lookup stuff right from the get go (rather than as an afterthought)! The question, of course, is how to integrate the loosely coupled capabilities in a logical way within that tutorial. Today I worked through the tutorial from scratch, up until the point where the prototype is completed, i.e., there's a JTextArea displaying data pulled from a database. That brought me to the place where I needed to be. In fact, as soon as the prototype is completed, i.e., the database connection has been shown to work, the whole story about Lookup.Provider and InstanceContent should be introduced, so that all the subsequent sections, i.e., everything within "Integrating CRUD Functionality" will be done by adding new capabilities to the Lookup.Provider. However, before I perform open heart surgery on that tutorial, I'd like to run the scenario by all those reading this blog who understand what I'm trying to do! (I.e., probably anyone who has read this far into this blog entry.) So, this is what I propose should happen and in this order: Point out the fact that right now the database access code is found directly within our TopComponent. Not good. Because you're mixing view code with data code and, ideally, the developers creating the user interface wouldn't need to know anything about the data access layer. Better to separate out the data access code into a separate class, within the CustomerLibrary module, i.e., far away from the module providing the user interface, with this content: public class CustomerDataAccess { public List<Customer> getAllCustomers() { return Persistence.createEntityManagerFactory("CustomerLibraryPU"). createEntityManager().createNamedQuery("Customer.findAll").getResultList(); } } Point out the fact that there is a concept of "Lookup" (which readers of the tutorial should know about since they should have followed the NetBeans Platform Quick Start), which is a registry into which objects can be published and to which other objects can be listening. In the same way as a TopComponent provides a Lookup, as demonstrated in the NetBeans Platform Quick Start, your own object can also provide a Lookup. So, therefore, let's provide a Lookup for Customer objects.  import org.openide.util.Lookup; import org.openide.util.lookup.AbstractLookup; import org.openide.util.lookup.InstanceContent; public class CustomerLookupProvider implements Lookup.Provider { private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: //...to come... // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } } Point out the fact that, in the same way as we can publish an object into the Lookup of a TopComponent, we can now also publish an object into the Lookup of our CustomerLookupProvider. Instead of publishing a String, as in the NetBeans Platform Quick Start, we'll publish an instance of our own type. And here is the type: public interface ReadCapability { public void read() throws Exception; } And here is an implementation of our type added to our Lookup: public class CustomerLookupProvider implements Lookup.Provider { private Set<Customer> customerSet; private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { customerSet = new HashSet<Customer>(); // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: instanceContent.add(new ReadCapability() { @Override public void read() throws Exception { ProgressHandle handle = ProgressHandleFactory.createHandle("Loading..."); handle.start(); customerSet.addAll(new CustomerDataAccess().getAllCustomers()); handle.finish(); } }); // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } public Set<Customer> getCustomers() { return customerSet; } } Point out that we can now create a new instance of our Lookup (in some other module, so long as it has a dependency on the module providing the CustomerLookupProvider and the ReadCapability), retrieve the ReadCapability, and then do something with the customers that are returned, here in the rewritten constructor of the TopComponent, without needing to know anything about how the database access is actually achieved since that is hidden in the implementation of our type, above: public CustomerViewerTopComponent() { initComponents(); setName(Bundle.CTL_CustomerViewerTopComponent()); setToolTipText(Bundle.HINT_CustomerViewerTopComponent()); // EntityManager entityManager = Persistence.createEntityManagerFactory("CustomerLibraryPU").createEntityManager(); // Query query = entityManager.createNamedQuery("Customer.findAll"); // List<Customer> resultList = query.getResultList(); // for (Customer c : resultList) { // jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); // } CustomerLookupProvider lookup = new CustomerLookupProvider(); ReadCapability rc = lookup.getLookup().lookup(ReadCapability.class); try { rc.read(); for (Customer c : lookup.getCustomers()) { jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); } } catch (Exception ex) { Exceptions.printStackTrace(ex); } } Does the above make as much sense to others as it does to me, including the naming of the classes? Feedback would be appreciated! Then I'll integrate into the tutorial and do the same for the other sections, i.e., "Create", "Update", and "Delete". (By the way, of course, the tutorial ends up showing that, rather than using a JTextArea to display data, you can use Nodes and explorer views to do so.)

  Read the article

• Using Open MQ as an Oracle CEP Event Source

  - by seth.white

  I helped an Oracle CEP customer recently who wanted to use Open MQ has an event source for their Oracle CEP application.  In this case, the Oracle CEP application was being used to provide monitoring for an electronic commerce website, however, the steps for configuring Open MQ are entirely independent of the application logic. I thought I would list the configuration steps in a blog post in case they might help others in the future. Note that although the Oracle CEP documentation states that only WebLogic and Tibco JMS are "officially" supported, any JMS implementation that provides a Java client should work with Oracle CEP. The first step is to add an adapter to the application's EPN. This can be done in the usual way, using the Eclipse IDE. The end result is something like the following bit of configuration in the application's Spring application context. Note that the provider attribute value of 'jms-inbound' specifies that the out-of-the-box JMS adapter is being used. <wlevs:adapter id="helloworldAdapter" provider="jms-inbound"> </wlevs:adapter>   Next, configure the inbound adapter so that it can connect to Open MQ in the Oracle CEP configuration file (config.xml). The snippet below provides an example of what this configuration should look like. The exact values specified for jndi-provider-url, jndi-factory, connection-jndi-name, destination-jndi-name elements will depend on your Open MQ configuration.  For example , if the name of your Open MQ topic destination is 'ElectronicCommerceTopic', then you would specify that as the destination-jndi-name.  The name of your Open MQ connection factory goes in the connection-jndi-name element. In my simple example, I also specify in event-type element so that the out-of-the-box JMS adapter will attempt to automatically convert incoming messages to events of type HelloWorldEvent. In a more complex application, one would configure a custom converter on the JMS adapter to convert from messages to events.  The Oracle CEP 11.1.3 documentation describes how to do this.   <jms-adapter> <name>helloworldAdapter</name> <event-type>HelloWorldEvent</event-type> <jndi-provider-url>file:///C:/Temp</jndi-provider-url> <jndi-factory>com.sun.jndi.fscontext.RefFSContextFactory</jndi-factory> <connection-jndi-name>YourJMSConnectionFactoryName</connection-jndi-name> <destination-jndi-name>YourJMSDestinationName</destination-jndi-name> </jms-adapter>   Finally, one needs to package the client-side Open MQ jars so that the classes that they contain are available to the Oracle CEP runtime. The recommended way for doing this in the Oracle CEP 11.1.3 release is to package the classes as a library module or simply place them in the application bundle.  The advantage of deploying the classes as a library module is that they are available to any application that wants to connect to Open MQ. In my case, I packaged the classes in my application bundle. A best practice when you want to include additional jars in your application bundle is to create a 'lib' directory in your Eclipse project and then copy the required jars into that directory.  Then, use the support that Eclipse provides to add the jars to the bundle classpath (which makes the classes part of your application in the same way that regular application classes are), and export all of the classes from your application bundle so that they are available to the Oracle CEP server runtime.  The screenshot below Illustrates how this is done in Eclipse.  The bundle classpath contains two Open MQ jars and all packages in the jars are exported.     Finally, import the javax.jms and javax.naming packages into the application module as these are needed by the Open MQ classes. The screenshot below shows the complete list of package imports for my sample application.       Once you have completed these steps, you should be able to build and deploy your application and begin receiving inbound messages from Open MQ. Technorati Tags: CEP,JMS,Adapter,Open MQ,Eclipse .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 }

  Read the article

• Wordpress nav not visible in pages like articles, blog & search

  - by kwek-kwek

  My wordpress*(a custom template)* nav is all working on all of the pages but now I found out that the Main nav doesn't show on this pages All pages e.g. search.php, single.php, index.php, page.php all has <?php get_header(); ?> I really don't know whats wrong. Here is the code for my header.php <?php /** * @package WordPress * @subpackage Default_Theme */ ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" <?php language_attributes() ?>> <head> <meta http-equiv="Content-Type" content="<?php bloginfo('html_type'); ?>; charset=<?php bloginfo('charset'); ?>" /> <title><?php bloginfo('name'); ?> <?php wp_title(); ?></title> <link rel="stylesheet" href="<?php bloginfo('stylesheet_url'); ?>" type="text/css" media="screen,projection" /> <link rel="stylesheet" href="<?php bloginfo('template_url'); ?>/css/sifr.css" type="text/css" /> <script src="<?php bloginfo('template_url'); ?>/js/sifr.js" type="text/javascript"></script> <script src="<?php bloginfo('template_url'); ?>/js/sifr-config.js" type="text/javascript"></script> <script src="http://cdn.jquerytools.org/1.1.2/jquery.tools.min.js"></script> <?php wp_head(); ?> </head> <?php $current_page = $post->ID; $parent = 1; while($parent) { $page_query = $wpdb->get_row("SELECT post_name, post_parent FROM $wpdb->posts WHERE ID = '$current_page'"); $parent = $current_page = $page_query->post_parent; if(!$parent) $parent_name = $page_query->post_name; } ?> <body id="<?php echo (is_page()) ? "$parent_name" : ((is_home()) ? "blog" : ((is_search()) ? "other" : ((is_single()) ? "blog" : "blog"))); ?>"> <div id="BGtie"> <!--HEAD WRAPPER--> <div id="headwrapper"> <!--HEADER--> <div id="headContainer"> <div id="nameTag"> <a href="<?php echo get_option('home'); ?>/"><?php bloginfo('name'); ?></a> </div> <!--TOP NAV--> <div id="topNav"> <ul> <li><a href="<?php bloginfo('url'); ?>home">Home</a></li> <li><a href="#">Request info</a></li> <li><a href="#">Contact us</a></li> <?php do_action('icl_language_selector'); ?> </ul> </div> <!--END TOP NAV--> <!--MAIN NAV--> <?php if ( is_page() AND (strtolower(ICL_LANGUAGE_CODE) == 'fr') ) {include("main-nav-fr.php");} ?> <?php if (is_page() AND (strtolower(ICL_LANGUAGE_CODE) == 'en')) include("main-nav-en.php") ?> <!--END MAIN NAV--> </div> <!--END HEADER--> </div> <!--END HEAD WRAPPER--> </div>

  Read the article

• Using JQuery tabs in an HTML 5 page

  - by nikolaosk

  In this post I will show you how to create a simple tabbed interface using JQuery,HTML 5 and CSS.Make sure you have downloaded the latest version of JQuery (minified version) from http://jquery.com/download.Please find here all my posts regarding JQuery.Also have a look at my posts regarding HTML 5.In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. Let me move on to the actual example.This is the sample HTML 5 page<!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">    <script type="text/javascript" src="jquery-1.8.2.min.js"> </script>     <script type="text/javascript" src="tabs.js"></script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>     <section id="tabs">        <ul>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#first-tab">Defenders</a></li>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#second-tab">Midfielders</a></li>            <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#third-tab">Strikers</a></li>        </ul>   <div id="first-tab">     <h3>Liverpool Defenders</h3>     <p> The best defenders that played for Liverpool are Jamie Carragher, Sami Hyypia , Ron Yeats and Alan Hansen.</p>   </div>   <div id="second-tab">     <h3>Liverpool Midfielders</h3>     <p> The best midfielders that played for Liverpool are Kenny Dalglish, John Barnes,Ian Callaghan,Steven Gerrard and Jan Molby.        </p>   </div>   <div id="third-tab">     <h3>Liverpool Strikers</h3>     <p>The best strikers that played for Liverpool are Ian Rush,Roger Hunt,Robbie Fowler and Fernando Torres.<br/>      </p>   </div> </div></section>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>  This is very simple HTML markup. I have styled this markup using CSS.The contents of the style.css file follow* {    margin: 0;    padding: 0;}header{font-family:Tahoma;font-size:1.3em;color:#505050;text-align:center;}#tabs {    font-size: 0.9em;    margin: 20px 0;}#tabs ul {    float: left;    background: #777;    width: 260px;    padding-top: 24px;}#tabs li {    margin-left: 8px;    list-style: none;}* html #tabs li {    display: inline;}#tabs li, #tabs li a {    float: left;}#tabs ul li.active {    border-top:2px red solid;    background: #15ADFF;}#tabs ul li.active a {    color: #333333;}#tabs div {    background: #15ADFF;    clear: both;    padding: 15px;    min-height: 200px;}#tabs div h3 {    margin-bottom: 12px;}#tabs div p {    line-height: 26px;}#tabs ul li a {    text-decoration: none;    padding: 8px;    color:#0b2f20;    font-weight: bold;}footer{background-color:#999;width:100%;text-align:center;font-size:1.1em;color:#002233;}There are some CSS rules that style the various elements in the HTML 5 file. These are straight-forward rules. The JQuery code lives inside the tabs.js file $(document).ready(function(){$('#tabs div').hide();$('#tabs div:first').show();$('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function(){$('#tabs ul li').removeClass('active');$(this).parent().addClass('active');var currentTab = $(this).attr('href');$('#tabs div').hide();$(currentTab).show();return false;});}); I am using some of the most commonly used JQuery functions like hide , show, addclass , removeClass I hide and show the tabs when the tab becomes the active tab. When I view my page I get the following result Hope it helps!!!!!

  Read the article

• WhatsApp &amp; Tasker for Android &ndash; Read &amp; Write messages

  - by Shaurya Anand

  So, I finally gave up on all my previous the Microsoft Mobile/Phone OS devices and made my switch to Android this year. I am using my Samsung Galaxy Note GT-N7000 with CyanogenMod 9.1.0 (http://get.cm/get/jenkins/7086/cm-9.1.0-n7000.zip) and ClockworkMod 6.0.1.2 (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-n7000.zip) since August this year and I am so happy with the performance and the flexibility it offers me. As a software developer by profession, I would expect most of my gadget to be highly customizable and programmable (one time or at intervals) to suit my needs as close as it can. I was introduced to Automation for Android – Tasker (https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm&hl=en) via reddit (http://www.reddit.com/r/tasker) and the word ‘automation’ was enough for me to dive right into this app. Only automation that I did earlier was switching profiles depending on location on there phones. And now, just imagine a complete set of possibilities that can be automate on the phone or via the phone. I did my research and found a couple of other tools that do the same/as close as what Tasker can do and few of them are even free. There’s one even by Microsoft called on{X} (https://play.google.com/store/apps/details?id=com.microsoft.onx.app&hl=en). Microsoft’s on{X} really caught my eye. You can write code for your phone on the web application by them, deploy it on your phone and even trace the flow all using your PC. Really brilliant, I love the fact that it’s all JavaScript. Here comes the but, it is still very very young and it’s policy of accessing my News Feed on Facebook is not something that I can not digest. On{X} is good, but as I said earlier, the API is not very mature and hence, I gave up on it. I bought Tasker, the best 5,00 € I spent in ages and I want to talk about it in this post. I am still a “noob” while operating this tool, but I tried my shot at automating WhatsApp (https://play.google.com/store/apps/details?id=com.whatsapp&hl=en), a popular messenger for various platform. The requirement for the automation is that, if I send a WhatsApp ‘wru’ message to the phone, it should respond back giving the location and battery level of my phone. It could be useful, if you like to locate your misplaced phone or automatically reply to your partner/friend, honestly, I don’t know what you will use it - through this post, I am just introducing automating WhatsApp using Tasker. Before we begin, the following script only works when your phone is rooted as we will be accessing the WhatsApp database and type some special characters like ‘:’. Let’s follow the code line by line: Profile:         Location request from XYZ. (12) // Name of your profile. Event:         Notification [ Owner Application:WhatsApp Title:* ] // When a new notification comes from WhatsApp, this event is fired. Read the end note, if you face problems with Chrome app after enabling Tasker accessibility. Enter:         A1: Run Shell [ Command:sqlite3 // We will access the WhatsApp database and check if the message comes from designated phone number or not. We mustn’t reply to every message.                 /data/data/com.whatsapp/databases/msgstore.db "SELECT _id, data FROM                  messages WHERE key_from_me='0' AND key_remote_jid LIKE '%XXXXXXXXXXX%' // Replace XXXXXXXXXXX with the phone number of your message sender.                 ORDER BY _id DESC LIMIT 1;" Timeout (Seconds):10 Use Root:On Store // I made a timeout for 10 seconds, if in case WhatsApp is busy accessing the database.                 Result In:%WHATSAPP_CURRREQ ] // Store the read Id and the last message on to the variable %WHATSAPP_CURRREQ         A2: If [ %WHATSAPP_CURRREQ ~R .*[wW][rR][uU].* ] // Check if the pattern of the message is correct and we are all set to send the location.                 A3: If [ %WHATSAPP_CURRREQ !~ %WHATSAPP_LASTREQ ] // Verify that the message is different from the last request. Remember every message has a unique Id.                         A4: Notify [ Title:WhatsApp location request... Text:Sending location // Just a notification that the location message is being prepared.                                 to Krati Gupta... Icon:<icon> Number:0 Permanent:On Priority:3 ] // Make a note it is a permanent notification, we will clear it later.                         A5: Secure Settings [ Configuration:Pattern Lock Disabled // I am disabling the pattern lock, that I use using the plugin Secure Settings.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure // You can download the plugin from here: https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=en                                 Settings ]                         A6: Secure Settings [ Configuration:Keyguard Disabled // Disable the keygaurd, it is useful, when your phone is on lock and you want to automate everything, even the typing.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A7: Secure Settings [ Configuration:GPS Enabled // Pretty clear, turn on the GPS and get location at A8                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A8: AutoShortcut [ Configuration:WhatsApp: Some One // I am using AutoShortcut plugin (https://play.google.com/store/apps/details?id=com.joaomgcd.autoshortcut) to start WhatsApp with the indented recipient.                                 Package:com.joaomgcd.autoshortcut Name:AutoShortcut ] // Replace Some One, actually choose it from the plugin, the right recipient.                         A9: Get Location [ Source:Any Timeout (Seconds):30 Continue Task // I am getting the location, timeout is 30 seconds, adjust it accordingly.                                 Immediately:Off Keep Tracking:Off ]                         A10: Secure Settings [ Configuration:Screen Dim // Now, this extension of the plugin Secure Settings, wakes your device so that you can type out the string on the WhatsApp app.                                 5 Seconds Package:com.intangibleobject.securesettings.plugin                                 Name:Secure Settings ]                         A11: Run Shell [ Command:input text // Now, I am using the shell script to type the text to the window, because the ‘:’ while not be typed from the Type task in Tasker.                                 LOCATION:maps.google.com/maps?q=%LOC Timeout (Seconds):0 Use Root:On // And also, this is way faster, but remember you need root for this, not for the other way of typing.                                 Store Result In: ]                         A12: Dpad [ Button:Right Repeat Times:1 ] // Focus the Send button                         A13: Dpad [ Button:Press Repeat Times:1 ] // And press it.                         A14: Dpad [ Button:Left Repeat Times:1 ] // Get back to the typing box.                         A15: Run Shell [ Command:input text LOCATION_ACCURACY:%LOCACC Timeout                                 (Seconds):0 Use Root:On Store Result In: ]                         A16: Dpad [ Button:Right Repeat Times:1 ]                         A17: Dpad [ Button:Press Repeat Times:1 ]                         A18: Dpad [ Button:Left Repeat Times:1 ]                         A19: Run Shell [ Command:input text BATTERY_LEVEL:%BATT% Timeout // I am adding Battery level in my case as well.                                 (Seconds):0 Use Root:On Store Result In: ]                         A20: Dpad [ Button:Right Repeat Times:1 ]                         A21: Dpad [ Button:Press Repeat Times:1 ]                         A22: Variable Set [ Name:%WHATSAPP_LASTREQ To:%WHATSAPP_CURRREQ Do // And now, we say, request is done.                                 Maths:Off Append:Off ]                         A23: Button [ Button:Back ] // I am exiting the WhatsApp nicely and not killing it. If you are the murderer kind, kill it, just know, you don’t have any place in the heaven.                         A24: Button [ Button:Back ]                         A25: Notify Cancel [ Title: Warn Not Exist:Off ] // Remove the permanent notification.                         A26: Notify [ Title:WhatsApp location request Text:Location sent // Make a temporary notification, and say, location is sent.                                 successfully. Icon:<icon> Number:0 Permanent:Off Priority:3 ]                                                         A27: Secure Settings [ Configuration:GPS Disabled // Disable all the horrible things we turned on earlier.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A28: Secure Settings [ Configuration:Pattern Lock Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A29: Secure Settings [ Configuration:Keyguard Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                 A30: End If         A31: End If Download this Task from here: http://db.tt/9vRmbhyb That’s it in the above small example – you can read/write messages from/to WhatsApp app. I am using n7000-cm9.1-cwr6. Oh yea, and if you are having the Talkback auto enabled for Chrome browser, you need to turn Off the Web scripts to run. Tasker is amazing, I have automated a lot of tasks using this tool. I will share a few none generic ones with you in my coming post here.

  Read the article

• Five Ways Enterprise 2.0 Can Transform Your Business - Q&A from the Webcast

  - by [email protected]

  A few weeks ago, Vince Casarez and I presented with KMWorld on the Five Ways Enterprise 2.0 Can Transform Your Business. It was an enjoyable, interactive webcast in which Vince and I discussed the ways Enterprise 2.0 can transform your business and more importantly, highlighted key customer examples of how to do so. If you missed the webcast, you can catch a replay here. We had a lot of audience participation in some of the polls we conducted and in the Q&A session. We weren't able to address all of the questions during the broadcast, so we attempted to answer them here: Q: Which area within your firm focuses on Web 2.0? Meaning, do you find new departments developing just to manage the web 2.0 (Twitter, Facebook, etc.) user experience or are you structuring current departments? A: There are three distinct efforts within Oracle. The first is around delivery of these Web 2.0 services for enterprise deployments. This is the focus of the WebCenter team. The second effort is injecting these Web 2.0 services into use cases that drive the different enterprise applications. This effort is focused on how to manage these external services and bring them into a cohesive flow for marketing programs, customer care, and purchasing. The third effort is how we consume these services internally to enhance Oracle's business delivery. It leverages the technologies and use cases of the first two but also pushes the envelope with regards to future directions of these other two areas. Q: In a business, Web 2.0 is mostly like action logs. How can we leverage the official process practice versus the logs of a recent action? Example: a system configuration modified last night on a call out versus the official practice that everybody would use in the morning.A: The key thing to remember is that most Web 2.0 actions / activity streams today are based on collaboration and communication type actions. At least with public social sites like Facebook and Twitter. What we're delivering as part of the WebCenter Suite are not just these types of activities but also enterprise application activities. These enterprise application activities come from different application modules: purchasing, HR, order entry, sales opportunity, etc. The actions within these systems are normally tied to a business object or process: purchase order/customer, employee or department, customer and supplier, customer and product, respectively. Therefore, the activities or "logs" as you name them are able to be "typed" so that as a viewer, you can filter or decide to see only certain types of information. In your example, you could have a view that only showed you recent "configuration" changes and this could be right next to a view that showed off the items to be watched every morning. Q: It's great to hear about customers using the software but is there any plan for future webinars to show what the products/installs look like? That would be very helpful.A: We don't have a webinar planned to show off the install process. However, we have a viewlet that's posted on Oracle Technology Network. You can see it here:http://www.oracle.com/technetwork/testcontent/wcs-install-098014.htmlAnd we've got excellent documentation that walks you through the steps here:http://download.oracle.com/docs/cd/E14571_01/install.1111/e12001/install.htmAnd there's a whole set of demos and examples of what WebCenter can do at this URL:http://www.oracle.com/technetwork/middleware/webcenter/release11-demos-097468.html Q: How do you anticipate managing metadata across the enterprise to make content findable?A: We need to first make sure we are all talking about the same thing when we use a word like "metadata". Here's why...  For a developer, metadata means information that describes key elements of the portal or application and what the portal or application can do. For content systems, metadata means key terms that provide a taxonomy or folksonomy about the information that is being indexed, ordered, and managed. For business intelligence systems, metadata means key terms that provide labels to groups of data that most non-mathematicians need to understand. And for SOA, metadata means labels for parts of the processes that business owners should understand that connect development terminology. There are also additional requirements for metadata to be available to the team building these new solutions as well as requirements to make this metadata available to the running system. These requirements are often separated by "design time" and "run time" respectively. So clearly, a general goal of managing metadata across the enterprise is very challenging. We've invested a huge amount of resources around Oracle Metadata Services (MDS) to be able to provide a more generic system for all of these elements. No other vendor has anything like this technology foundation in their products. This provides a huge benefit to our customers as they will now be able to find content, processes, people, and information from a common set of search interfaces with consistent enterprise wide results. Q: Can you give your definition of terms as to document and content, please?A: Content applies to a broad category of information from Word documents, presentations and reports through attachments to invoices and/or purchase orders. Content is essentially any type of digital asset including images, video, and voice. A document is just one type of content. Q: Do you have special integration tools to realize an interaction between UCM and WebCenter Spaces/Services?A: Yes, we've dedicated a whole team of engineers to exploit the key features of Oracle UCM within WebCenter.  While ensuring that WebCenter can connect to other non-Oracle systems, we've made sure that with the combined set of Oracle technology, no other solution can match the combined power and integration.  This is part of the Oracle Fusion Middleware strategy which is to provide best in class capabilities for Content and Portals.  When combined together, the synergy between the two products enables users to quickly add capabilities when they are needed.  For example, simple document sharing is part of the combined product offering, but if legal discovery or archiving is required, Oracle UCM product includes these capabilities that can be quickly added.  There's no need to move content around or add another system to support this, it's just a feature that gets turned on within Oracle UCM. Q: All customers have some interaction with their applications and have many older versions, how do you see some of these new Enterprise 2.0 capabilities adding value to existing enterprise application deployments?A: Just as Service Oriented Architectures allowed for connecting the processes of different applications systems to work together, there's a need for a similar approach with regards to these enterprise 2.0 capabilities. Oracle WebCenter is built on a core architecture that allows for SOA of these Enterprise 2.0 services so that one set of scalable services can be used and integrated directly into any type of application. In this way, users can get immediate value out of the Enterprise 2.0 capabilities without having to wait for the next major release or upgrade. These centrally managed WebCenter services expose a set of standard interfaces that make it extremely easy to add them into existing applications no matter what technology the application has been implemented. Q: We've heard about Oracle Next Generation applications called "Fusion Applications", can you tell me how all this works together?A: Oracle WebCenter powers the core collaboration and social computing services found within Fusion Applications. It is the core user experience technology for how all the application screens have been implemented. And the core concept of task flows allows for all the Fusion Applications modules to be adaptable and composable by business users and IT without needing to be a professional developer. Oracle WebCenter is at the heart of the new Fusion Applications. In addition, the same patterns and technologies are now being added to the existing applications including JD Edwards, Siebel, Peoplesoft, and eBusiness Suite. The core technology enables all these customers to have a much smoother upgrade path to Fusion Applications. They get immediate benefits of injecting new user interactions into their existing applications without having to completely move to Fusion Applications. And then when the time comes, their users will already be well versed in how the new capabilities work. Q: Does any of this work with non Oracle software? Other databases? Other application servers? etc.A: We have made sure that Oracle WebCenter delivers the broadest set of development choices so that no matter what technology you developers are using, WebCenter capabilities can be quickly and easily added to the site or application. In addition, we have certified Oracle WebCenter to run against non-Oracle databases like DB2 and SQLServer. We have stated plans for certification against MySQL as well. Later in CY 2011, Oracle will provide certification on non-Oracle application servers such as WebSphere and JBoss. Q: How do we balance User and IT requirements in regards to Enterprise 2.0 technologies?A: Wrong decisions are often made because employee knowledge is not tapped efficiently and opportunities to innovate are often missed because the right people do not work together. Collaboration amongst workers in the right business context is critical for success. While standalone Enterprise 2.0 technologies can improve collaboration for collaboration's sake, using social collaboration tools in the context of business applications and processes will improve business responsiveness and lead companies to a more competitive position. As these systems become more mission critical it is essential that they maintain the highest level of performance and availability while scaling to support larger communities. Q: What are the ways in which Enterprise 2.0 can improve business responsiveness?A: With a wide range of Enterprise 2.0 tools in the marketplace, CIOs need to deploy solutions that will meet the requirements from users as well as address the requirements from IT. Workers want a next-generation user experience that is personalized and aggregates their daily tools and tasks, while IT needs to ensure the solution is secure, scalable, flexible, reliable and easily integrated with existing systems. An open and integrated approach to deploying portals, content management, and collaboration can enhance your business by addressing both the needs of knowledge workers for better information and the IT mandate to conserve resources by simplifying, consolidating and centralizing infrastructure and administration.  

  Read the article

• The 20 Most Important Keyboard Shortcuts For Windows PCs

  - by Chris Hoffman

  Keyboard shortcuts are practically essential for using any type of PC. They’ll speed up almost everything you do. But long lists of keyboard shortcuts can quickly become overwhelming if you’re just getting started. This list will cover the most useful keyboard shortcuts that every Windows user should know. If you haven’t used keyboard shortcuts much, these will show you just how useful keyboard shortcuts can be. Windows Key + Search The Windows key is particularly important on Windows 8 — especially before Windows 8.1 — because it allows you to quickly return to the Start screen. On Windows 7, it opens the Start menu. Either way, you can start typing immediately after you press the Windows key to search for programs, settings, and files. For example, if you want to launch Firefox, you can press the Windows key, start typing the word Firefox, and press Enter when the Firefox shortcut appears. It’s a quick way to launch programs, open files, and locate Control Panel options without even touching your mouse and without digging through a cluttered Start menu. You can also use the arrow keys to select the shortcut you want to launch before pressing Enter. Copy, Cut, Paste Copy, Cut, and Paste are extremely important keyboard shortcuts for text-editing. If you do any typing on your computer, you probably use them. These options can be accessed using the mouse, either by right-clicking on selected text or opening the application’s Edit menu, but this is the slowest way to do it. After selecting some text, press Ctrl+C to copy it or Ctrl+X to cut it. Position the cursor where you want the text and use Ctrl+V to paste it. These shortcuts can save you a huge amount of time over using the mouse. Search the Current Page or File To quickly perform a search in the current application — whether you’re in a web browser, PDF viewer, document editor, or almost any other type of application — press Ctrl+F. The application’s search (or “Find”) feature will pop up, and you can instantly start typing a phrase you want to search for. You can generally press Enter to  go to the next appearance of the word or phrase in the document, quickly searching through it for what you’re interested in. Switch Between Applications and Tabs Rather than clicking buttons on your taskbar, Alt+Tab is a very quick way to switch between running applications. Windows orders the list of open windows by the order you accessed them, so if you’re only using two different applications, you can just press Alt+Tab to quickly switch between them. If switching between more than two windows, you’ll have to hold the Alt key and press Tab repeatedly to toggle through the list of open windows. If you miss the window you want, you can always press Alt+Shift+Tab to move through the list in reverse. To move between tabs in an application — such as the browser tabs in your web browser — press Ctrl+Tab. Ctrl+Shift+Tab will move through tabs in reverse. Quickly Print If you’re the kind of person who still prints things, you can quickly open the print window by pressing Ctrl+P. This can be faster than hunting down the Print option in every program you want to print something from. Basic Browser Shortcuts Web browser shortcuts can save you tons of time, too. Ctrl+T is a very useful one, as it will open a new tab with the address bar focused, so you can quickly press Ctrl +T, type a search phrase or web address, and press Enter to go there. To go back or forward while browsing, hold the Ctrl key and press the left or right arrow keys. If you’d just like to focus your web browser’s address bar so you can type a new web address or search without opening a new tab, press Ctrl + L. You can then start typing something and press Enter. Close Tabs and Windows To quickly close the current application, press Alt+F4. This works on the desktop and even in new Windows 8-style applications. To quickly close the current browser tab or document, press Ctrl+W. This will often close the current window if there are no other tabs open. Lock Your Computer When you’re done using your computer and want to step away, you may want to lock it. People won’t be able to log in and access your desktop unless they know your password. You can do this from the Start menu or Start screen, but the fastest way to lock your screen is by quickly pressing Windows Key + L before you get up. Access the Task Manager Ctrl+Alt+Delete will take you to a screen that allows you to quickly launch the Task Manager or perform other operations, such as signing out. This is particularly useful because if can be used to recover from situations where your computer doesn’t appear responsive or isn’t accepting input. For example, if a full-screen game becomes unresponsive, Ctrl+Alt+Delete will often allow you to escape from it and end it via the Task Manager. Windows 8 Shortcuts On Windows 8 PCs, there are other very important keyboard shortcuts. Windows Key + C will open your Charms bar, while Windows Key + Tab will open the new App Switcher. These keyboard shortcuts will allow you to avoid the hot corners, which can be tedious to use with a mouse. On the desktop side, Windows Key + D will take you back to the desktop from anywhere. Windows Key + X will open a special “power user menu” that gives you quick access to options that are hidden in the new Windows 8 interface, including Shut Down, Restart, and Control Panel. If you’re interested in learning more keyboard shortcuts, be sure to check our longer lists of 47 keyboard shortcuts that work in all web browsers and 42+ keyboard shortcuts to speed up text-editing. Image Credit: Jeroen Bennink on Flickr     

  Read the article

• jQuery Toggle with Cookie

  - by Cameron

  I have the following toggle system, but I want it to remember what was open/closed using the jQuery cookie plugin. So for example if I open a toggle and then navigate away from the page, when I come back it should be still open. This is code I have so far, but it's becoming rather confusing, some help would be much appreciated thanks. jQuery.cookie = function (name, value, options) { if (typeof value != 'undefined') { options = options || {}; if (value === null) { value = ''; options = $.extend({}, options); options.expires = -1; } var expires = ''; if (options.expires && (typeof options.expires == 'number' || options.expires.toUTCString)) { var date; if (typeof options.expires == 'number') { date = new Date(); date.setTime(date.getTime() + (options.expires * 24 * 60 * 60 * 1000)); } else { date = options.expires; } expires = '; expires=' + date.toUTCString(); } var path = options.path ? '; path=' + (options.path) : ''; var domain = options.domain ? '; domain=' + (options.domain) : ''; var secure = options.secure ? '; secure' : ''; document.cookie = [name, '=', encodeURIComponent(value), expires, path, domain, secure].join(''); } else { var cookieValue = null; if (document.cookie && document.cookie != '') { var cookies = document.cookie.split(';'); for (var i = 0; i < cookies.length; i++) { var cookie = jQuery.trim(cookies[i]); if (cookie.substring(0, name.length + 1) == (name + '=')) { cookieValue = decodeURIComponent(cookie.substring(name.length + 1)); break; } } } return cookieValue; } }; // var showTop = $.cookie('showTop'); if ($.cookie('showTop') == 'collapsed') { $(".toggle_container").hide(); $(".trigger").toggle(function () { $(this).addClass("active"); }, function () { $(this).removeClass("active"); }); $(".trigger").click(function () { $(this).next(".toggle_container").slideToggle("slow,"); }); } else { $(".toggle_container").show(); $(".trigger").toggle(function () { $(this).addClass("active"); }, function () { $(this).removeClass("active"); }); $(".trigger").click(function () { $(this).next(".toggle_container").slideToggle("slow,"); }); }; $(".trigger").click(function () { if ($(".toggle_container").is(":hidden")) { $(this).next(".toggle_container").slideToggle("slow,"); $.cookie('showTop', 'expanded'); } else { $(this).next(".toggle_container").slideToggle("slow,"); $.cookie('showTop', 'collapsed'); } return false; }); and this is a snippet of the HTML it works with: <li> <label for="small"><input type="checkbox" id="small" /> Small</label> <a class="trigger" href="#">Toggle</a> <div class="toggle_container"> <p class="funding"><strong>Funding</strong></p> <ul class="childs"> <li class="child"> <label for="fully-funded1"><input type="checkbox" id="fully-funded1" /> Fully Funded</label> <a class="trigger" href="#">Toggle</a> <div class="toggle_container"> <p class="days"><strong>Days</strong></p> <ul class="days clearfix"> <li><label for="1pre16">Pre 16</label> <input type="text" id="1pre16" /></li> <li><label for="2post16">Post 16</label> <input type="text" id="2post16" /></li> <li><label for="3teacher">Teacher</label> <input type="text" id="3teacher" /></li> </ul> </div> </li>

  Read the article

• jQuery CSS Custom Flyout Menu Styling Issue

  - by aherrick

  I'm close to nailing this flyout menu I have been working on, just have a couple of current pain points. I'm trying to get left/right padding on my submenu items, as you can see I am not quite there. Also when the first submenu is displayed, I want to create a bit of a gap between the first row of list items and the child. Below is my current code and a screen shot displaying what I want. Based on my current CSS, any thoughts on how to get this done in a clean way? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript"> function mainmenu() { $("#nav ul").css({ display: "none" }); // Opera Fix $("#nav li").hover(function() { $(this).find('ul:first').css({ visibility: "visible", display: "none" }).show(400); }, function() { $(this).find('ul:first').css({ visibility: "hidden" }); }); } $(document).ready(function() { mainmenu(); }); </script> <style type="text/css"> * { padding: 0px; margin: 0px; } body { font-size: 0.85em; font-family: Verdana, Arial, Helvetica, sans-serif; } #nav, #nav ul { margin: 0; padding: 0; list-style-type: none; list-style-position: outside; position: relative; } #nav a { display: block; padding: 4px 0px 4px 0px; color: #dfca90; text-decoration: none; background-color: #ECE9D8; font-size: 9px; font-weight: bold; font: bold 15px Palatino, 'Palatino Linotype' , Georgia, serif; } #nav > li > a { font-size: 16px; font-variant: small-caps; border-right: 1px solid #dfca90; padding-right: 10px; padding-left: 10px; padding-bottom: 6px; padding-top: 6px; background-color: #fff; color: #dfca90; } #nav li ul li a:hover { color: #999; } #nav li { float: left; position: relative; } #nav ul { position: absolute; display: none; width: 170px; border: 2px solid #dfca90; } #nav ul li { } #nav li ul a { width: 170px; height: auto; float: left; } #nav ul ul { top: -2px; } #nav li ul ul { left: 170px; background-color: #ECE9D8; } #nav li:hover ul ul, #nav li:hover ul ul ul, #nav li:hover ul ul ul ul { display: none; } #nav li:hover ul, #nav li li:hover ul, #nav li li li:hover ul, #nav li li li li:hover ul { display: block; } </style> </head> <body> <ul id="nav"> <li><a href="#">1 HTML</a></li> <li><a href="#">2 CSS</a></li> <li><a href="#">3 Javascript </a> <ul> <li><a href="#">3.1 jQuery</a> <ul> <li><a href="#">3.1.1 Download</a> </li> <li><a href="#">3.1.2 Tutorial</a> </li> </ul> </li> <li><a href="#">3.2 Mootools</a></li> <li><a href="#">3.3 Prototype</a></li> </ul> </li> </ul> </body> </html>

  Read the article

• how to do event checks for loops?

  - by yao jiang

  I am having some trouble getting the logic down for this. Currently, I have an app that animates the astar pathfinding algorithm. On start of the app, the ui will show the following: User can press "space" to randomly choose start/end coords, then the app will animate it. Or, user can choose the start/end by left-click/right-click. During the animation, the user can also left-click to generate blocks, or right-click to choose a new destiantion. Where I am stuck at is how to handle the events while the app is animating. Right now, I am checking events in the main loop, then when the app is animating, I do event checks again. While it works fine, I feel that I am probably doing it wrong. What is the proper way of setting up the main loop that will handle the events while the app is animating? In main loop, the app start animating once user choose start/end. In my draw function, I am putting another event checker in there. def clear(rows): for r in range(rows): for c in range(rows): if r%3 == 1 and c%3 == 1: color = brown; grid[r][c] = 1; buildCoor.append(r); buildCoor.append(c); else: color = white; grid[r][c] = 0; pick_image(screen, color, width*c, height*r); pygame.display.flip(); os.system('cls'); # draw out the grid def draw(start, end, grid, route_coord): # draw the end coords color = red; pick_image(screen, color, width*end[1],height*end[0]); pygame.display.flip(); # then draw the rest of the route for i in range(len(route_coord)): # pausing because we want animation time.sleep(speed); # get the x/y coords x,y = route_coord[i]; event_on = False; if grid[x][y] == 2: color = green; elif grid[x][y] == 3: color = blue; for event in pygame.event.get(): if event.type == pygame.MOUSEBUTTONDOWN: if event.button == 3: print "destination change detected, rerouting"; # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; grid[r][c] = 4; end = [r, c]; elif event.button == 1: print "user generated event"; pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # mark it as a block for now grid[r][c] = 1; event_on = True; if check_events([x,y]) or event_on: # there is an event # mark it as a block for now grid[y][x] = 1; pick_image(screen, event_x, width*y, height*x); pygame.display.flip(); # then find a new route new_start = route_coord[i-1]; marked_grid, route_coord = find_route(new_start, end, grid); draw(new_start, end, grid, route_coord); return; # just end draw here so it wont throw the "index out of range" error elif grid[x][y] == 4: color = red; pick_image(screen, color, width*y, height*x); pygame.display.flip(); # clear route coord list, otherwise itll just add more unwanted coords route_coord_list[:] = []; clear(rows); # main loop while not done: # check the events for event in pygame.event.get(): # mouse events if event.type == pygame.MOUSEBUTTONDOWN: # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # find which button pressed, highlight grid accordingly if event.button == 1: # left click, start coords if grid[r][c] == 2: grid[r][c] = 0; color = white; elif grid[r][c] == 0 or grid[r][c] == 4: grid[r][c] = 2; start = [r,c]; color = green; else: grid[r][c] = 1; color = brown; elif event.button == 3: # right click, end coords if grid[r][c] == 4: grid[r][c] = 0; color = white; elif grid[r][c] == 0 or grid[r][c] == 2: grid[r][c] = 4; end = [r,c]; color = red; else: grid[r][c] = 1; color = brown; pick_image(screen, color, width*c, height*r); # keyboard events elif event.type == pygame.KEYDOWN: clear(rows); # one way to quit program if event.key == pygame.K_ESCAPE: print "program will now exit."; done = True; # space key for random start/end elif event.key == pygame.K_SPACE: # first clear the ui clear(rows); # now choose random start/end coords buildLoc = zip(buildCoor,buildCoor[1:])[::2]; #print buildLoc; (start_x, start_y, end_x, end_y) = pick_point(); while (start_x, start_y) in buildLoc or (end_x, end_y) in buildLoc: (start_x, start_y, end_x, end_y) = pick_point(); clear(rows); print "chosen random start/end coords: ", (start_x, start_y, end_x, end_y); if (start_x, start_y) in buildLoc or (end_x, end_y) in buildLoc: print "error"; # draw the route marked_grid, route_coord = find_route([start_x,start_y],[end_x,end_y], grid); draw([start_x, start_y], [end_x, end_y], marked_grid, route_coord); # return key for user defined start/end elif event.key == pygame.K_RETURN: # first clear the ui clear(rows); # get the user defined start/end print "user defined start/end are: ", (start[0], start[1], end[0], end[1]); grid[start[0]][start[1]] = 1; grid[end[0]][end[1]] = 2; # draw the route marked_grid, route_coord = find_route(start, end, grid); draw(start, end, marked_grid, route_coord); # c to clear the screen elif event.key == pygame.K_c: print "clearing screen."; clear(rows); # go fullscreen elif event.key == pygame.K_f: if not full_sc: pygame.display.set_mode([1366, 768], pygame.FULLSCREEN); full_sc = True; rows = 15; clear(rows); else: pygame.display.set_mode(size); full_sc = False; # +/- key to change speed of animation elif event.key == pygame.K_LEFTBRACKET: if speed >= 0.1: print SPEED_UP; speed = speed_up(speed); print speed; else: print FASTEST; print speed; elif event.key == pygame.K_RIGHTBRACKET: if speed < 1.0: print SPEED_DOWN; speed = slow_down(speed); print speed; else: print SLOWEST print speed; # second method to quit program elif event.type == pygame.QUIT: print "program will now exit."; done = True; # limit to 20 fps clock.tick(20); # update the screen pygame.display.flip();

  Read the article

• What more a Business Service can do?

  - by Rajesh Sharma

  Business services can be accessed from outside the application via XAI inbound service, or from within the application via scripting, Java, or info zones. Below is an example to what you can do with a business service wrapping an info zone.   Generally, a business service is specific to a page service program which references a maintenance object, that means one business service = one service program = one maintenance object. There have been quite a few threads in the forum around this topic where the business service is misconstrued to perform services only on a single object, for e.g. only for CILCSVAP - SA Page Maintenance, CILCPRMP - Premise Page Maintenance, CILCACCP - Account Page Maintenance, etc.   So what do you do when you want to retrieve some "non-persistent" field or information associated with some object/entity? Consider few business requirements: ·         Retrieve all the field activities associated to an account. ·         Retrieve the last bill date for an account. ·         Retrieve next bill date for an account.   It can be as simple as described below, for this post, we'll use the first scenario - Retrieve all the field activities associated to an account. To achieve this we'll have to do the following:   Step 1: Define an info zone   (A basic Zone of type F1-DE-SINGLE - Info Data Explorer - Single SQL has been used; you can use F1-DE - Info Data Explorer - Multiple SQLs for more complex scenarios)   Parameter Description Value To Enter User Filter 1 F1 Initial Display Columns C1 C2 C3 SQL Condition F1 SQL Statement SELECT     FA_ID, FA_STATUS_FLG, CRE_DTTM FROM     CI_FA WHERE     SP_ID IN         (SELECT SP_ID         FROM CI_SA_SP         WHERE             SA_ID IN                 (SELECT SA_ID                  FROM CI_SA                  WHERE                     ACCT_ID = :F1)) Column 1 source=SQLCOL sqlcol=FA_ID Column 2 source=SQLCOL sqlcol=FA_STATUS_FLG Column 3 type=TIME source=SQLCOL sqlcol=CRE_DTTM order=DESC   Note: Zone code specified was 'CM_ACCTFA'   Step 2: Define a business service Create a business service linked to 'Service Name' FWLZDEXP - Data Explorer. Schema will look like this:   <schema> <zoneCd mapField="ZONE_CD" default="CM_ACCTFA"/>      <accountId mapField="F1_VALUE"/>      <rowCount mapField="ROW_CNT"/>      <result type="group">         <selectList type="list" mapList="DE">             <faId mapField="COL_VALUE">                 <row mapList="DE_VAL">                     <SEQNO is="1"/>                 </row>             </faId>              <status mapField="COL_VALUE">                 <row mapList="DE_VAL">                     <SEQNO is="2"/>                 </row>             </status>              <createdDateTime mapField="COL_VALUE">                 <row mapList="DE_VAL">                     <SEQNO is="3"/>                 </row>             </createdDateTime>         </selectList>     </result> </schema>      What's next? As mentioned above, you can invoke this business service from an outside application via XAI inbound service or call this business service from within a script.   Step 3: Create a XAI inbound service for above created business service         Step 4: Test the inbound service   Go to XAI Submission and test the newly created service   <RXS_AccountFA>       <accountId>5922116763</accountId> </RXS_AccountFA>  

  Read the article

• Merging elements inside a xml.etree.ElementTree

  - by theAlse

  I have a huge test data like the one provided below (and yes I have no control over this data). Each line is actually 6 parts and I need to generate an XML based on this data. Nav;Basic;Dest;Smoke;No;Yes; Nav;Dest;Recent;Regg;No;Yes; Nav;Dest;Favourites;Regg;No;Yes; ... Nav;Dest using on board;By POI;Smoke;No;Yes; Nav;Dest using on board;Other;Regg;No;Yes; The first 3 elements on each line denotes "test suites"-XML element and the last 3 element should create a "test case"-XML element. I have successfully converted it into a XML using the following code: # testsuite (root) testsuite = ET.Element('testsuite') testsuite.set("name", "Tests") def _create_testcase_tag(elem): global testsuite level1, level2, level3, elem4, elem5, elem6 = elem # -- testsuite (level1) testsuite_level1 = ET.SubElement(testsuite, "testsuite") testsuite_level1.set("name", level1) # -- testsuite (level2) testsuite_level2 = ET.SubElement(testsuite_level1, "testsuite") testsuite_level2.set("name", level2) # -- testsuite (level3) testsuite_level2 = ET.SubElement(testsuite_level2, "testsuite") testsuite_level2.set("name", level3) # -- testcase testcase = ET.SubElement(testsuite_level2, "testcase") testcase.set("name", "TBD") summary = ET.SubElement(testcase, "summary") summary.text = "Test Type= %s, Automated= %s, Available=%s" %(elem4, elem5, elem6) with open(input_file) as in_file: for line_number, a_line in enumerate(in_file): try: parameters = a_line.split(';') if len(parameters) >= 6: level1 = parameters[0].strip() level2 = parameters[1].strip() level3 = parameters[2].strip() elem4 = parameters[3].strip() elem5 = parameters[4].strip() elem6 = parameters[5].strip() lines_as_list.append((level1, level2, level3, elem4, elem5, elem6)) except ValueError: pass lines_as_list.sort() for elem in lines_as_list: _create_testcase_tag(elem) output_xml = ET.ElementTree(testsuite) ET.ElementTree.write(output_xml, output_file, xml_declaration=True, encoding="UTF-8") The above code generates an XML like this: <testsuite name="Tests"> <testsuite name="Nav"> <testsuite name="Basic navigation"> <testsuite name="Set destination"> <testcase name="TBD"> <summary>Test Type= Smoke test Automated= No, Available=Yes</summary> </testcase> </testsuite> </testsuite> </testsuite> <testsuite name="Nav"> <testsuite name="Set destination"> <testsuite name="Recent"> <testcase name="TBD"> <summary> Test Type= Reggression test Automated= No, Available=Yes </summary> </testcase> </testsuite> </testsuite> </testsuite> </testsuite> ... This is all correct, but as you can see I have created a whole tree for each line and that is not what I need. I need to combine e.g. all testsuite with the same name into one testsuite and also perform that recursively. So the XML looks like this instead: <testsuite name="Tests"> <testsuite name="Nav"> <testsuite name="Basic navigation"> <testsuite name="Set destination"> <testcase name="TBD"> <summary>Test Type= Smoke test Automated= No, Available=Yes</summary> </testcase> </testsuite> <testsuite name="Recent"> <testcase name="TBD"> <summary> Test Type= Reggression test Automated= No, Available=Yes </summary> </testcase> </testsuite> </testsuite> </testsuite> </testsuite> I hope you can understand what I mean, but level1, level2 and level3 should be unique with testcases inside. How should I do this? Please do not suggest the use of any external libraries! I can not install new libraries in customer site. xml.etree.ElementTree is all I have. Thanks

  Read the article

• SecurityException in Sandboxed AppDomain

  - by Galen

  I'm attempting to use C# as a scripting language using CSharpCodeProvider (using VS2010 and .NET 4.0). I want the scripts to be run in a restricted AppDomain with minimal permissions. Currently, I'm getting an exception while trying to instantiate a class in the AppDomain (The call to CreateInstanceAndUnwrap()). Here is some simplified code that reproduces the exception: using System; using System.Collections.Generic; using Microsoft.CSharp; using System.CodeDom; using System.CodeDom.Compiler; using System.Security; using System.Security.Policy; using System.Security.Permissions; using System.Reflection; using System.Runtime.Remoting; namespace ConsoleApp { class Program { static void Main(string[] args) { // set permissions PermissionSet permissions = new PermissionSet(PermissionState.None); permissions.AddPermission(new SecurityPermission( SecurityPermissionFlag.Execution)); AppDomainSetup adSetup = new AppDomainSetup(); adSetup.ApplicationBase = AppDomain.CurrentDomain.BaseDirectory; //Create a list of fully trusted assemblies Assembly[] asms = AppDomain.CurrentDomain.GetAssemblies(); List<StrongName> sns = new List<StrongName>(); for (int x = 0; x < asms.Length; x++) { StrongName sn = asms[x].Evidence.GetHostEvidence<StrongName>(); if (sn != null && sns.Contains(sn) == false) sns.Add(sn); } //this includes: "mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" AppDomain domain = AppDomain.CreateDomain("NewAppDomain", AppDomain.CurrentDomain.Evidence, adSetup, permissions);//, sns);//, sn4, sn, sn2, sn3); try { String asmName = Assembly.GetExecutingAssembly().FullName; String typeName = typeof(ConsoleApp.ScriptRunner).FullName; //Throws exception here ScriptRunner scriptRunner = domain.CreateInstanceAndUnwrap(asmName, typeName) as ScriptRunner; } catch (SecurityException se) { System.Diagnostics.Debug.WriteLine(se.Message); } catch (Exception ex) { System.Diagnostics.Debug.WriteLine(ex.Message); } } } public class ScriptRunner : MarshalByRefObject { public ScriptRunner() { //A breakpoint placed here is never reached. CompilerParameters param; param = new CompilerParameters(); param.CompilerOptions = ""; param.GenerateExecutable = false; param.GenerateInMemory = true; param.IncludeDebugInformation = false; // C# compiler CSharpCodeProvider codeProvider = new CSharpCodeProvider(); CompilerResults results = codeProvider.CompileAssemblyFromFile(param, "Danger.cs"); } } } The exception is being thrown from mscorlib and it is a System.Reflection.TargetInvocationException that has an inner System.Security.SecurityException. Here is the exception: System.Reflection.TargetInvocationException was unhandled Message=Exception has been thrown by the target of an invocation. Source=mscorlib StackTrace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean skipCheckThis, Boolean fillCache) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at System.Activator.CreateInstance(String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, Evidence securityInfo, StackCrawlMark& stackMark) at System.Activator.CreateInstance(String assemblyName, String typeName) at System.AppDomain.CreateInstance(String assemblyName, String typeName) at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName) at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName) at ConsoleApp.Program.Main(String[] args) in C:\Documents and Settings\NaultyCS\my documents\visual studio 2010\Projects\ConsoleApplication4\ConsoleApplication4\Program.cs:line 46 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Security.SecurityException Message=Request failed. Source=ConsoleApplication4 GrantedSet=<PermissionSet class="System.Security.PermissionSet" version="1"> <IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Flags="Execution"/> </PermissionSet> PermissionState=<PermissionSet class="System.Security.PermissionSet" version="1" Unrestricted="true"/> RefusedSet="" Url=file:///C:/Documents and Settings/NaultyCS/my documents/visual studio 2010/Projects/ConsoleApplication4/ConsoleApplication4/bin/Debug/ConsoleApplication4.EXE StackTrace: at ConsoleApp.ScriptRunner..ctor() InnerException: So it appears to me that mscorlib is demanding full trust. I've added it as a fully trusted assembly, but it has no effect. What am I doing wrong here?

  Read the article

• Sorting the columns of an HTML table using JQuery

  - by nikolaosk

  In this post I will show you how easy is to sort the columns of an HTML table. I will use an external library,called Tablesorter which makes life so much easier for developers. ?here are other posts in my blog regarding JQuery.You can find them all here. You can find another post regarding HTML tables and JQuery here. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions.   1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page 4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.Then we need to download the Tablesorter JQuery plugin. Please donwload it, here. 5) We need to reference the JQuery library and the external JQuery Plugin. In the head section ? add the following lines.   <script src="jquery-1_8_2_min.js" type="text/javascript"></script>  <script src="jquery.tablesorter.js" type="text/javascript"></script>6) We need to type the HTML markup, the HTML table and its columns <body>    <form id="form1" runat="server">    <div>        <h1>Liverpool Legends</h1>        <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10" class="liverpool">            <thead>                <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr>            </thead>            <tbody>            <tr>                <td>Alan Hansen</td>                <td>Graeme Souness</td>                <td>Ian Rush</td>            </tr>            <tr>                <td>Alan Kennedy</td>                <td>Steven Gerrard</td>                <td>Michael Owen</td>            </tr>            <tr>                <td>Jamie Garragher</td>                <td>Kenny Dalglish</td>                <td>Robbie Fowler</td>            </tr>            <tr>                <td>Rob Jones</td>                <td>Xabi Alonso</td>                <td>Dirk Kuyt</td>            </tr>                </tbody>        </table>            </div>    </form></body> 7) Inside the head section we also write the simple JQuery code.   <script type="text/javascript"> $(document).ready(function() { $('.liverpool').tablesorter(); }); </script> 8) Run your application.This is how the HTML table looks before the table is sorted on the basis of the selected column.   9) Now I will click on the Midfielders header.Have a look at the picture below  Tablesorter is an excellent JQuery plugin that makes sorting HTML tables a piece of cake. Hope it helps!!!

  Read the article

• How To: Using spatial data with Entity Framework and Connector/Net

  - by GABMARTINEZ

  One of the new features introduced in Entity Framework 5.0 is the incorporation of some new types of data within an Entity Data Model: the spatial data types. These types allow us to perform operations on coordinates values in an easier way. There's no need to add stored routines or functions for every operation among these geometry types, now the user can have the alternative to put this logic on his application or keep it in the database. In the new 6.7.4 version there's also this new feature incorporated to Connector/Net library so our users can start exploring it and could provide us some feedback or comments about this new functionality. Through this tutorial on how to create a Code First Entity Model with a geometry column, we'll show an example on using Geometry types and some common operations when using geometry types inside an application. Requirements: - Connector/Net 6.7.4 - Entity Framework 5.0 version - .NET Framework 4.5 version - Basic understanding on Entity Framework and C# language. - An installed and running instance of MySQL Server 5.5.x or 5.6.10 version- Visual Studio 2012. Step One: Create a new Console Application  Inside Visual Studio select File->New Project menu option and select the Console Application template. Also make sure the .Net 4.5 version is selected so the new features for EF 5.0 will work with the application. Step Two: Add the Entity Framework Package For adding the Entity Framework Package there is more than one option: the package manager console or the Manage Nuget Packages option dialog. If you want to open the Package Manager Console, go to the Tools Menu -> Library Package Manager -> Package Manager Console. On the Package Manager Console Type:Install-Package EntityFrameworkThis will add the reference to the project of the latest released No alpha version of Entity Framework. Step Three: Adding Entity class and DBContext We'll add a simple class that represents a table entity to save some places and its location using a DBGeometry column that will be mapped to a Geometry type in MySQL. After that some operations can be performed using this data. public class MyPlace { [Key] public int Id { get; set; } public string name { get; set; } public DbGeometry location { get; set; } } public class JourneyDb : DbContext { public DbSet<MyPlace> MyPlaces { get; set; } }  Also make sure to add the connection string to the App.Config file as in the example: <?xml version="1.0" encoding="utf-8"?> <configuration>   <configSections>     <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->     <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />   </configSections>   <startup>     <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />   </startup>   <connectionStrings>     <add name="JourneyDb" connectionString="server=localhost;userid=root;pwd=;database=journeydb" providerName="MySql.Data.MySqlClient"/>   </connectionStrings>   <entityFramework>     </entityFramework> </configuration> Note also that the <entityFramework> section is empty.Step Four: Adding some new records.On the Program.cs file add the following code for the Main method so the Database gets created and also some new data can be added to the new table. This code adds some records containing some determinate locations. After being added a distance function will be used to know how much distance has each location in reference to the Queens Village Station in New York. static void Main(string[] args)    {     using (JourneyDb cxt = new JourneyDb())      {        cxt.Database.Delete();        cxt.Database.Create();         cxt.MyPlaces.Add(new MyPlace()        {          name = "JFK INTERNATIONAL AIRPORT OF NEW YORK",          location = DbGeometry.FromText("POINT(40.644047 -73.782291)"),        });         cxt.MyPlaces.Add(new MyPlace()        {          name = "ALLEY POND PARK",          location = DbGeometry.FromText("POINT(40.745696 -73.742638)"),        });       cxt.MyPlaces.Add(new MyPlace()        {          name = "CUNNINGHAM PARK",          location = DbGeometry.FromText("POINT(40.735031 -73.768387)"),        });         cxt.MyPlaces.Add(new MyPlace()        {          name = "QUEENS VILLAGE STATION",          location = DbGeometry.FromText("POINT(40.717957 -73.736501)"),        });         cxt.SaveChanges();         var points = (from p in cxt.MyPlaces                      select new { p.name, p.location });        foreach (var item in points)       {         Console.WriteLine("Location " + item.name + " has a distance in Km from Queens Village Station " + DbGeometry.FromText("POINT(40.717957 -73.736501)").Distance(item.location) * 100);       }       Console.ReadKey();      }  }}Output : Location JFK INTERNATIONAL AIRPORT OF NEW YORK has a distance from Queens Village Station 8.69448802402959 Km. Location ALLEY POND PARK has a distance from Queens Village Station 2.84097675104912 Km. Location CUNNINGHAM PARK has a distance from Queens Village Station 3.61695793727275 Km. Location QUEENS VILLAGE STATION has a distance from Queens Village Station 0 Km. Conclusion:Adding spatial data to a table is easier than before when having Entity Framework 5.0. This new Entity Framework feature that handles spatial data columns within the Data layer has a lot of integrated functions and methods toease this type of tasks.Notes:This version of Connector/Net is just released as GA so is preatty much stable to be used on a ProductionEnvironment. Please send us your comments or questions using this blog or at the Forums where we keep answering any questions you have about Connector/Net and MySQL Server.A copy of this sample project can be downloaded here. This application does not include any library so you will haveto add them before running it. Happly MySQL/.Net Coding.

  Read the article

• Rename image file on upload php

  - by blasteralfred

  Hi, I have a form which uploads and re sizes image. The html file file submits data to a php file. The script is as follows; Index.html <form action="resizer.php" method="post" enctype="multipart/form-data"> Image: <input type="file" name="file" /> <input type="submit" name="submit" value="upload" /> </form> Resizer.php <?php require_once('imageresizer.class.php'); $imagename = "myimagename"; //Path To Upload Directory $dirpath = "uploaded/"; //MAX WIDTH AND HEIGHT OF IMAGE $max_height = 100; $max_width = 100; //Create Image Control Object - Parameters(file name, file tmp name, file type, directory path) $resizer = new ImageResizer($_FILES['file']['name'],$_FILES['file']['tmp_name'],$dirpath); //RESIZE IMAGE - Parameteres(max height, max width) $resizer->resizeImage($max_height,$max_width); //Display Image $resizer->showResizedImage(); ?> imageresizer.class.php <?php class ImageResizer{ public $file_name; public $tmp_name; public $dir_path; //Set variables public function __construct($file_name,$tmp_name,$dir_path){ $this->file_name = $file_name; $this->tmp_name = $tmp_name; $this->dir_path = $dir_path; $this->getImageInfo(); $this->moveImage(); } //Move the uploaded image to the new directory and rename public function moveImage(){ if(!is_dir($this->dir_path)){ mkdir($this->dir_path,0777,true); } if(move_uploaded_file($this->tmp_name,$this->dir_path.'_'.$this->file_name)){ $this->setFileName($this->dir_path.'_'.$this->file_name); } } //Define the new filename public function setFileName($file_name){ $this->file_name = $file_name; return $this->file_name; } //Resize the image function with new max height and width public function resizeImage($max_height,$max_width){ $this->max_height = $max_height; $this->max_width = $max_width; if($this->height > $this->width){ $ratio = $this->height / $this->max_height; $new_height = $this->max_height; $new_width = ($this->width / $ratio); } elseif($this->height < $this->width){ $ratio = ($this->width / $this->max_width); $new_width = $this->max_width; $new_height = ($this->height / $ratio); } else{ $new_width = $this->max_width; $new_height = $this->max_height; } $thumb = imagecreatetruecolor($new_width, $new_height); switch($this->file_type){ case 1: $image = imagecreatefromgif($this->file_name); break; case 2: $image = imagecreatefromjpeg($this->file_name); break; case 3: $image = imagecreatefrompng($this->file_name); break; case 4: $image = imagecreatefromwbmp($this->file_name); } imagecopyresampled($thumb, $image, 0, 0, 0, 0, $new_width, $new_height, $this->width, $this->height); switch($this->file_type){ case 1: imagegif($thumb,$this->file_name); break; case 2: imagejpeg($thumb,$this->file_name,100); break; case 3: imagepng($thumb,$this->file_name,0); break; case 4: imagewbmp($thumb,$this->file_name); } imagedestroy($image); imagedestroy($thumb); } public function getImageInfo(){ list($width, $height, $type) = getimagesize($this->tmp_name); $this->width = $width; $this->height = $height; $this->file_type = $type; } public function showResizedImage(){ echo "<img src='".$this->file_name." />"; } public function onSuccess(){ header("location: index.php"); } } ?> Everything is working well. The image will be uploaded in it's original filename and extension with a "_" prefix. But i want to rename the image to "myimagename" on upload, which is a variable in "Resizer.php". How can i make this possible?? Thanks in advance :) blasteralfred

  Read the article

• PHP mtChart (new pChart): how do i control the angle of x-axis labels?

  - by gsquare567

  i am trying to graph the results of a survey, where the question is multiple choice. eg. How would you describe this website? format: option | number of times selected | percentage of users who selected that option Informative 1 50% All of the above 1 50% Interesting 0 0% Intelligent 0 0% Cool 0 0% Incredible 0 0% Sleek 0 0% Amazing the graph is a bar graph, where each bar represents one of those options, and the height of the bar depends on the number of times selected. however, the labels are slanted at a 45 degree angle and are barely readable! here is my code: <?php require_once ("includes/common.php"); require_once ("graph/mtChart.min.php"); // type must be specified $type = $_GET['type']; if($type == "surveys_report_MC_or_CB") { // PARAMS $surveyID = $_GET['surveyID']; $questionID = $_GET['questionID']; // END PARAMS $question = SurveyQuestions::getSingle($questionID); $answers = SurveyAnswers::getAll($questionID); $options = SurveyQuestionOptions::getAll($question[SurveyQuestions::surveyQuestionID]); $others = SurveyAnswers::setOptionCounts($options, $answers); $printedOthers = false; // set graph $values = array(); $axisLabels = array(); foreach($options as $option) { $values[$option[SurveyQuestionOptions::optionText]] = $option['count']; $axisLabels[] = $option[SurveyQuestionOptions::optionText]; } $graphs = array(); $graphs[0] = $values; $xName = "Option"; $yName = "Number of Times Selected"; $graphTitle = $question[SurveyQuestions::question]; $series = array("Total"); $showLegend = false; $tall = false; } drawGraph($graphs, $axisLabels, $xName, $yName, $graphTitle, $series, $showLegend, $tall); function drawGraph($graphs, $axisLabels, $xName, $yName, $graphTitle, $series, $showLegend, $tall) { $Graph = ($tall) ? new mtChart(575,375) : new mtChart(575,275); // Dataset definition $avg = 0; $i = 0; foreach ($graphs as $key => $value) { $Graph->AddPoint($value,"series" . $key); $Graph->SetSerieName($series[$key],"series" . $key); // Get average $avg += array_sum($value); $size = sizeof($value); $i += $size; // Calculate x-axis tick interval $step = ceil($size / 25); } $Graph->AddPoint($axisLabels,"XLabel"); $Graph->AddAllSeries(); $Graph->RemoveSerie("XLabel"); $Graph->SetAbsciseLabelSerie("XLabel"); $Graph->SetXAxisName($xName); $Graph->SetYAxisName($yName); // Get from cache if it exists $Graph->enableCaching(NULL, 'graph/cache/'); $Graph->GetFromCache(); // Initialize the graph $Graph->setInterval($step); $Graph->setFontProperties("graph/tahoma.ttf",8); ($showLegend) ? $Graph->setGraphArea(45,30,475,200) : $Graph->setGraphArea(75,30,505,200); $Graph->drawGraphArea(255,255,255,TRUE); $Graph->drawScale(SCALE_START0,100,100,100,TRUE,55,1,TRUE); $Graph->drawGrid(4,TRUE,230,230,230,50); // Draw the 0 line $Graph->setFontProperties("graph/tahoma.ttf",6); $Graph->drawTreshold(0,143,55,72,TRUE,TRUE); // Draw the bar graph $Graph->drawBarGraph(); // Draw average line $Graph->drawTreshold($avg/$i, 0, 0, 0, FALSE, FALSE, 5); // Finish the graph $Graph->setFontProperties("graph/tahoma.ttf",8); if ($showLegend) { $Graph->drawLegend(482,30,255,255,255,255,255,255,100,100,100); } $Graph->setFontProperties("graph/tahoma.ttf",10); $Graph->drawTitle(0,22,$graphTitle,100,100,100,555); // Draw Graph $Graph->Stroke(); } and here is where i use it on the page: <div class="graph_container"> <img src="drawGraph.php?type=surveys_report_MC_or_CB&surveyID=<?php echo $survey[Surveys::surveyID] ?>&questionID=<?php echo $question[SurveyQuestions::surveyQuestionID] ?>" /> is there a setting i can apply to the graph which will make the text look nicer, or at least let me set the angle to 90 degrees so people can read it if they cock their head to the left? thanks! btw, mtchart is located here: http://code.google.com/p/mtchart/ and pchart (the original, which has mainly the same code) is here: http://pchart.sourceforge.net/documentation.php

  Read the article

• Unable to connect to Wireless after installing Ubuntu 12.10

  - by Moulik

  I am using Asus U56E laptop and after installing Ubuntu 12.10 alongside Windows 8, I am unable to connect to the Wireless. I have been trying to solve this problem since two weeks and couldn't solve it. Please help. Any answer would be appreciated. Here are some command-line results. lspci -v | grep -iA 7 network ubuntu@ubuntu:~$ lspci -v | grep -iA 7 network 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at de800000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi lsmod | grep iwlwifi ubuntu@ubuntu:~$ lsmod | grep iwlwifi iwlwifi 386826 0 mac80211 539908 1 iwlwifi cfg80211 206566 2 iwlwifi,mac80211 ubuntu@ubuntu:~$ dmesg | grep iwlwifi [ 57.846261] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 57.846264] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 57.846336] iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000 [ 57.846338] iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000c7c000 [ 57.846341] iwlwifi 0000:02:00.0: >HW Revision ID = 0x67 [ 57.846438] iwlwifi 0000:02:00.0: >irq 52 for MSI/MSI-X [ 59.558335] iwlwifi 0000:02:00.0: >loaded firmware version 41.28.5.1 build 33926 [ 59.558514] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 59.558516] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 59.558517] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 59.558519] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 59.558520] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled [ 59.558522] iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84 [ 59.558583] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 59.569083] iwlwifi 0000:02:00.0: >device EEPROM VER=0x557, CALIB=0x6 [ 59.569085] iwlwifi 0000:02:00.0: >Device SKU: 0x150 [ 59.569087] iwlwifi 0000:02:00.0: >Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 59.569100] iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 70.208469] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.208648] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 [ 70.366319] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.366470] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 sudo lshw -c network ubuntu@ubuntu:~$ sudo lshw -c network *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:84:99:c4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.5.0-17-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 54:04:a6:2b:6a:ef capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) ifconfig ubuntu@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 54:04:a6:2b:6a:ef UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:176 errors:0 dropped:0 overruns:0 frame:0 TX packets:176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14368 (14.3 KB) TX bytes:14368 (14.3 KB) wlan0 Link encap:Ethernet HWaddr 40:25:c2:84:99:c4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) iwconfig ubuntu@ubuntu:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off iwlist scan ubuntu@ubuntu:~$ iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results nm-tool ubuntu@ubuntu:~$ nm-tool NetworkManager Tool State: disconnected - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 54:04:A6:2B:6A:EF Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: disconnected Default: no HW Address: 40:25:C2:84:99:C4 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points hypeness2: Infra, 00:21:29:DA:08:4F, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA love: Infra, 68:7F:74:17:02:66, Freq 2412 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 DIRECT-MwSCX-3400Pamela: Infra, 02:15:99:A3:3F:AC, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2 router: Infra, 1C:AF:F7:D6:76:F3, Freq 2417 MHz, Rate 54 Mb/s, Strength 20 WPA2 wing: Infra, E8:40:F2:34:E4:F7, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 132LINKSYS: Infra, 00:1A:70:80:1F:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 57 WEP VMITTAL: Infra, E0:46:9A:3C:F0:C4, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WEP HP-Print-10-LaserJet 1025: Infra, 7C:E9:D3:7E:F8:10, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 ACNBB: Infra, 00:26:75:22:A6:2F, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 SATKAIVAL: Infra, 00:18:E7:CE:69:A6, Freq 2412 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2 hypeness: Infra, B8:E6:25:24:C3:B1, Freq 2437 MHz, Rate 54 Mb/s, Strength 54 WPA WPA2 CSNetwork: Infra, BC:14:01:58:C5:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2 tharma: Infra, BC:14:01:E2:06:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2 Active2.4: Infra, 10:6F:3F:0E:F3:8E, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 ACNBB: Infra, 00:26:75:58:4E:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 85 KO: Infra, BC:14:01:2E:AF:A8, Freq 2452 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 FEAR: Infra, 00:18:4D:C0:BC:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA Pamela: Infra, BC:14:01:52:F6:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 bvrk2: Infra, 78:CD:8E:7B:3C:79, Freq 2457 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 BELL030: Infra, D8:6C:E9:17:AF:09, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 WPA2 Desai: Infra, 00:1D:7E:52:FB:C5, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WEP Sritharan: Infra, BC:14:01:E5:59:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 PFN: Infra, 00:13:10:8B:CF:45, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WEP rfkill list all ubuntu@ubuntu:~$ rfkill list all 0: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wimax: WiMAX Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no so these are some more results sudo modprobe -r iwlwifi ubuntu@ubuntu:~$ sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1 ubuntu@ubuntu:~$ sudo modprobe iwlwifi 11n_disable=1 echo "blacklist asus_wmi" | sudo tee -a /etcmodprobe.d/blacklist.conf ubuntu@ubuntu:~$ echo "blacklist asus_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf blacklist asus_wmi echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf ubuntu@ubuntu:~$ echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi ubuntu@ubuntu:~$ sudo modprobe -rfv iwlwifi rmmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko sudo modprobe -v iwlwifi ubuntu@ubuntu:~$ sudo modprobe -v iwlwifi insmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko 11n_disable=1

  Read the article

• asp.net labels and asp.net textboxes are not lining up correctly?

  - by Xaisoft

  My Registration page currently looks like the following: The current styling I have for the above is image is: <style type="text/css"> #contactinfo label { float: left; width: 10em; margin-right: 0.5em; text-align: right; font-size: 14px; } #contactinfo p { padding: 5px; } #contactinfo input[type="text"], input[type="password"] { height: 1.5em; } #contactinfo select { padding: 0.25em; } #contactinfo input[type="text"]:focus, input[type="password"]:focus { background-color: #FFFFE0; } #contactinfo .update { margin-left: 12.5em; } #contactinfo .error { background-color: transparent; } #contactinfo .longtextbox { width: 20em; } #contactinfo .shorttextbox { width: 5em; } </style> and the markup is <div id="contactinfo"> <p> <asp:Label runat="server" AssociatedControlID="txtEmail">Email </asp:Label> <asp:TextBox ID="txtEmail" runat="server" CssClass="longtextbox" /> </p> <p> <asp:Label runat="server" AssociatedControlID="txtFirstName">First Name </asp:Label> <asp:TextBox ID="txtFirstName" runat="server" ValidationGroup="AccountValidation" /> <asp:RequiredFieldValidator runat="server" ControlToValidate="txtFirstName" Text="First Name is required." ValidationGroup="AccountValidation" CssClass="error"> </asp:RequiredFieldValidator> </p> <p> <asp:Label runat="server" AssociatedControlID="txtLastName">Last Name </asp:Label> <asp:TextBox ID="txtLastName" runat="server" ValidationGroup="AccountValidation" /> <asp:RequiredFieldValidator runat="server" ControlToValidate="txtLastName" Text="Last Name is required." ValidationGroup="AccountValidation" CssClass="error"> </asp:RequiredFieldValidator> </p> <p> <asp:Label runat="server" AssociatedControlID="txtBusinessName">Business Name </asp:Label> <asp:TextBox ID="txtBusinessName" runat="server" CssClass="longtextbox" ValidationGroup="AccountValidation" /> <asp:RequiredFieldValidator runat="server" ControlToValidate="txtBusinessName" Text="Business Name is required." ValidationGroup="AccountValidation" CssClass="error"> </asp:RequiredFieldValidator> </p> <p> <asp:Label runat="server" AssociatedControlID="txtPhone">Phone </asp:Label> <asp:TextBox ID="txtPhone" runat="server" ValidationGroup="AccountValidation" /> </p> <p> <asp:Label runat="server" AssociatedControlID="txtAddress">Address </asp:Label> <asp:TextBox ID="txtAddress" runat="server" CssClass="longtextbox" ValidationGroup="AccountValidation" /> <asp:RequiredFieldValidator runat="server" ControlToValidate="txtAddress" Text="Address is required." ValidationGroup="AccountValidation" CssClass="error"></asp:RequiredFieldValidator> </p> <p> <asp:Label runat="server" AssociatedControlID="txtCity">City </asp:Label><asp:TextBox ID="txtCity" runat="server" ValidationGroup="AccountValidation" /> <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="txtCity" Text="City is required." ValidationGroup="AccountValidation" CssClass="error"> </asp:RequiredFieldValidator> </p> <p> <asp:Label runat="server" AssociatedControlID="ddlState">State </asp:Label> <asp:DropDownList ID="ddlState" runat="server" DataSourceID="dsStates" DataTextField="Name" DataValueField="Id"> </asp:DropDownList> </p> <p> <asp:Label runat="server" AssociatedControlID="txtZipcode">Zipcode</asp:Label> <asp:TextBox ID="txtZipCode" runat="server" CssClass="shorttextbox" ValidationGroup="AccountValidation" /> </p> </div> As you can see from above, I have every label field pair wrapped in a p tag so it breaks to the next line, but I am not sure if I need to do this. I want to get city, state, and zip all on the same line, but as soon as I move all the labels and inputs for city,state,zip into one p tag, it looks like the following and I don't know how to fix it.

  Read the article

• ODEE Green Field (Windows) Part 4 - Documaker

  - by AndyL-Oracle

  Welcome back! We're about nearing completion of our installation of Oracle Documaker Enterprise Edition ("ODEE") in a green field. In my previous post, I covered the installation of SOA Suite for WebLogic. Before that, I covered the installation of WebLogic, and Oracle 11g database - all of which constitute the prerequisites for installing ODEE. Naturally, if your environment already has a WebLogic server and Oracle database, then you can skip all those components and go straight for the heart of the installation of ODEE. The ODEE installation is comprised of two procedures, the first covers the installation, which is running the installer and answering some questions. This will lay down the files necessary to install into the tiers (e.g. database schemas, WebLogic domains, etcetera). The second procedure is to deploy the configuration files into the various components (e.g. deploy the database schemas, WebLogic domains, SOA composites, etcetera). I will segment my posts accordingly! Let's get started, shall we? Unpack the installation files into a temporary directory location. This should extract a zip file. Extract that zip file into the temporary directory location. Navigate to and execute the installer in Disk1/setup.exe. You may have to allow the program to run if User Account Control is enabled. Once the dialog below is displayed, click Next. Select your ODEE Home - inside this directory is where all the files will be deployed. For ease of support, I recommend using the default, however you can put this wherever you want. Click Next. Select the database type, database connection type – note that the database name should match the value used for the connection type (e.g. if using SID, then the name should be IDMAKER; if using ServiceName, the name should be “idmaker.us.oracle.com”). Verify whether or not you want to enable advanced compression. Note: if you are not licensed for Oracle 11g Advanced Compression option do not use this option! Terrible, terrible calamities will befall you if you do! Click Next. Enter the Documaker Admin user name (default "dmkr_admin" is recommended for support purposes) and set the password. Update the System name and ID (must be unique) if you want/need to - since this is a green field install you should be able to use the default System ID. The only time you'd change this is if you were, for some reason, installing a new ODEE system into an existing schema that already had a system. Click Next. Enter the Assembly Line user name (default "dmkr_asline" is recommended) and set the password. Update the Assembly Line name and ID (must be unique) if you want/need to - it's quite possible that at some point you will create another assembly line, in which case you have several methods of doing so. One is to re-run the installer, and in this case you would pick a different assembly line ID and name. Click Next. Note: you can set the DB folder if needed (typically you don’t – see ODEE Installation Guide for specifics. Select the appropriate Application Server type - in this case, our green field install is going to use WebLogic - set the username to weblogic (this is required) and specify your chosen password. This credential will be used to access the application server console/control panel. Keep in mind that there are specific criteria on password choices that are required by WebLogic, but are not enforced by the installer (e.g. must contain a number, must be of a certain length, etcetera). Choose a strong password. Set the connection information for the JMS server. Note that for the 12.3.x version, the installer creates a separate JVM (WebLogic managed server) that hosts the JMS server, whereas prior editions place the JMS server on the AdminServer.  You may also specify a separate URL to the JMS server in case you intend to move the JMS resources to a separate/different server (e.g. back to AdminServer). You'll need to provide a login principal and credentials - for simplicity I usually make this the same as the WebLogic domain user, however this is not a secure practice! Make your JMS principal different from the WebLogic principal and choose a strong password, then click Next. Specify the Hot Folder(s) (comma-delimited if more than one) - this is the directory/directories that is/are monitored by ODEE for jobs to process. Click Next. If you will be setting up an SMTP server for ODEE to send emails, you may configure the connection details here. The details required are simple: hostname, port, user/password, and the sender's address (e.g. emails will appear to be sent by the address shown here so if the recipient clicks "reply", this is where it will go). Click Next. If you will be using Oracle WebCenter:Content (formerly known as Oracle UCM) you can enable this option and set the endpoints/credentials here. If you aren't sure, select False - you can always go back and enable this later. I'm almost 76% certain there will be a post sometime in the future that details how to configure ODEE + WCC:C! Click Next. If you will be using Oracle UMS for sending MMS/text messages, you can enable and set the endpoints/credentials here. As with UCM, if you're not sure, don't enable it - you can always set it later. Click Next. On this screen you can change the endpoints for the Documaker Web Service (DWS), and the endpoints for approval processing in Documaker Interactive. The deployment process for ODEE will create 3 managed WebLogic servers for hosting various Documaker components (JMS, Interactive, DWS, Dashboard, Documaker Administrator, etcetera) and it will set the ports used for each of these services. In this screen you can change these values if you know how you want to deploy these managed servers - but for now we'll just accept the defaults. Click Next. Verify the installation details and click Install. You can save the installation into a response file if you need to (which might be useful if you want to rerun this installation in an unattended fashion). Allow the installation to progress... Click Next. You can save the response file if needed (e.g. in case you forgot to save it earlier!) Click Finish. That's it, you're done with the initial installation. Have a look around the ODEE_HOME that you just installed (remember we selected c:\oracle\odee_1?) and look at the files that are laid down. Don't change anything just yet! Stay tuned for the next segment where we complete and verify the installation. 

  Read the article

• Drop down select to change a second drop down select automatically

  - by zvzej

  I have a webpage where I have a form with several areas to input text and two drop down select options countries is the first one and depending in witch country is chosen the second should display the estates for that country to choose. my page connects to my db from where it gets the countries and estates.... I have a table with the country names and one table for each country estates. so all I'm trying to do is making it change the states to choose from automatically depending witch country got selected with out summiting the form since that enters a new entry to another table in my db. I seen that using javascript is the way to go but can't get it to work in my case since I don't want to be sent to another page or summit the form. here is part of my code any help will be greatly appreciated. Thanks $paissql = "SELECT * FROM Paises_table"; $paisresult = mysql_query($paissql); ?> <script language="text/javascript"> function showMe(str) { <? $estadosql = "SELECT * FROM ".str."_table"; $estadoresult = mysql_query($estadosql); ?> } </script> <TABLE BORDER="2" CELLPADDING="2" CELLSPACING="2" ALIGN="CENTER"> <form action="<?php echo $_SERVER['PHP_SELF']?>" method=POST> <TR><th> id </th> <td><?php echo $row_to_edit['id']?></td> </TR> <TR><th>Nombre:</th><td><input type="TEXT" name=Nombre value="<?php echo $row_to_edit['Id_Nombre']?>" SIZE="100"></td></TR> </td></TR> <TR><th>Pais:</th><td> <select name=Pais onchange="showMe(this.value);" > <? while($rowp = mysql_fetch_array($paisresult)) { $pais = $rowp['Name']; ?> <option value=<?php echo $pais; ?> <?php if($row_to_edit['Pais']==$pais) { echo ' selected="true"';} ?> ><?php echo $pais; ?> </option> <? } ?> </select></td></TR> <TR><th>Estado:</th><td> <select name=Estado > <? while($rowe = mysql_fetch_array($estadoresult)) { $estado = $rowe['Estado']; ?> <option value=<?php echo $estado; ?> <?php if($row_to_edit['Estado']==$estado) { echo ' selected="true"';} ?> ><?php echo $estado; ?></option> <? } ?> <TR><th>Ciudad:</th><td><input type="TEXT" name=Ciudad value="<?php echo $row_to_edit['Ciudad']?>" SIZE="100"></td></TR> <TR><th>Website:</th><td><input type="TEXT" name=website value="<?php echo $row_to_edit['website']?>" SIZE="100"></td></TR> <TR><td> </td> <td> <input type="HIDDEN" name="id" value="<?php echo $edit_id?>"> Para agregar preciona aqui: <input type="SUBMIT" name="ACTION" value="AGREGAR"> </td> </TR> </form> </TABLE> <BR> <BR>

  Read the article

• Notifications for Expiring DBSNMP Passwords

  - by Courtney Llamas

  Most user accounts these days have a password profile on them that automatically expires the password after a set number of days.   Depending on your company’s security requirements, this may be as little as 30 days or as long as 365 days, although typically it falls between 60-90 days. For a normal user, this can cause a small interruption in your day as you have to go get your password reset by an admin. When this happens to privileged accounts, such as the DBSNMP account that is responsible for monitoring database availability, it can cause bigger problems. In Oracle Enterprise Manager 12c you may notice the error message “ORA-28002: the password will expire within 5 days” when you connect to a target, or worse you may get “ORA-28001: the password has expired". If you wait too long, your monitoring will fail because the password is locked out. Wouldn’t it be nice if we could get an alert 10 days before our DBSNMP password expired? Thanks to Oracle Enterprise Manager 12c Metric Extensions (ME), you can! See the Oracle Enterprise Manager Cloud Control Administrator’s Guide for more information on Metric Extensions. To create a metric extension, select Enterprise / Monitoring / Metric Extensions, and then click on Create. On the General Properties screen select either Cluster Database or Database Instance, depending on which target you need to monitor.  If you have both RAC and Single instance you may need to create one for each. In this example we will create a Cluster Database metric.  Enter a Name for the ME and a Display Name. Then select SQL for the Adapter.  Adjust the Collection Schedule as desired, for this example we will collect this metric every 1 day. Notice for metric collected every day, we can determine the exact time we want to collect. On the Adapter page, enter the query that you wish to execute.  In this example we will use the query below that specifically checks for the DBSNMP user that is expiring within 10 days. Of course, you can adjust this query to alert for any user that can cause an outage such as an application account or service account such as RMAN. select username, account_status, trunc(expiry_date-sysdate) days_to_expirefrom dba_userswhere username = 'DBSNMP'and expiry_date is not null; The next step is to create the columns to store the data returned from the query.  Click Add and add a column for each of the fields in the same order that data is returned.  The table below will help you complete the column additions. Name Display Name Column Type Value Type Metric Category Unit Username User Name Key String Security AccountStatus Account Status Data String Security DaysToExpire Days Until Expiration Data Number Security Days When creating the DaysToExpire column, you can add a default threshold here for Warning and Critical (say < 10 and 5).  When all columns have been added, click Next. On the Credentials page, you can choose to use the default monitoring credentials or specify new credentials.  We will use the default credentials established for our target (dbsnmp). The next step is to test your Metric Extension.  Click on Add to select a target for testing, then click Select. Now click the button Run Test to execute the test against the selected target(s). We can see in the example below that the Metric Extension has executed and returned a value of 68 days to expire. Click Next to proceed. Review the metric extension in the final screen and click Finish. The metric will be created in Editable status.  Select the metric, click Actions and select Deployable Draft. You can do this once more to move to Published. Finally, we want to apply this metric to a target. When managing many targets, it’s best to add your metric to a template, for details on adding a Metric Extension to a template see the Administrator’s Guide. For this example, we will deploy this to a target directly. Select Actions / Deploy to Targets. Click Add and select the target you wish to deploy to and click Submit.  Once deployment is complete, we can go to the target and view the Metric & Collection Settings to see the new metric and its thresholds.   After some time, you will find the metric has collected and the days to expiration for DBSNMP user can be seen in the All Metrics view.   For metrics collected once per day, you may have to wait up to 24 hours to see the metric and current severity. In the example below, the current severity is Clear (green check) as it is not scheduled to expire within 10 days. To test the notification, we can edit the thresholds for the new metric so they trigger an alert.  Our password expires in 139 days, so we’ll change our Warning to 140 and leave Critical at 5, in our example we also changed the collection time to every 5 minutes.  At the next collection, you’ll find that the current severity changes to a Warning and any related Incident Rules would be triggered to create an Incident or Notification as desired. Now that you get a notification that your DBSNMP passwords is about to expire, you can use OEM Command Line Interface (EM CLI) verb update_db_password to change it at both the database target and the OEM target in one step.  The caveat is you must know the existing password to use the update_db_password command.  To learn more about EM CLI, see the Oracle Enterprise Manager Command Line Interface Guide.  Below is an example of changing the password with the update_db_password verb.  $ ./emcli update_db_password -target_name=emrep -target_type=oracle_database -user_name=dbsnmp -change_at_target=yes -change_all_references=yes Enter value for old_password :Enter value for new_password :Enter value for retype_new_password :Successfully submitted a job to change the password in Enterprise Manager and on the target database: "emrep"Execute "emcli get_jobs -job_id=FA66C1C4D663297FE0437656F20ACC84" to check the status of the job.Search for job name "CHANGE_PWD_JOB_FA66C1C4D662297FE0437656F20ACC84" on the Jobs home page to check job execution details. The subsequent job created will typically run quickly enough that a blackout is not needed, however if you submit a script with many targets to change, your job may run slower so adding a blackout to the script is recommended. $ ./emcli get_jobs -job_id=FA66C1C4D663297FE0437656F20ACC84 Name Type Job ID Execution ID Scheduled Completed TZ Offset Status Status ID Owner Target Type Target Name CHANGE_PWD_JOB_FA66C1C4D662297FE0437656F20ACC84 ChangePassword FA66C1C4D663297FE0437656F20ACC84 FA66C1C4D665297FE0437656F20ACC84 2014-05-28 09:39:12 2014-05-28 09:39:18 GMT-07:00 Succeeded 5 SYSMAN oracle_database emrep After implementing the above Metric Extension and using the EM CLI update_db_password verb, you will be able to stay on top of your DBSNMP password changes without experiencing an unplanned monitoring outage.  

  Read the article

• Calculated Fields - Idiosyncracies

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

  Read the article

< Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >