Search Results

Search found 12019 results on 481 pages for 'stop execution'.

Page 380/481 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

• Thomson router reboots unexpectedly with an apparent remote connection attempt

  - by ChrisF

  I've got a weird problem. Every so often my rooter (a Thomson TG585 v8 running version 8.2.7.8 of it's firmware) reboots itself. It seems to be associated with this message in the event log: FIREWALL replay check (1 of 2): Protocol: ICMP Src ip: 183.178.144.177 Dst ip: xxx.xxx.xxx.xxx Type: Destination Unreachable Code: Host Unreacheable xxx.xxx.xxx.xxx is my external IP address 183.178.144.177 resolves to 183178144177.ctinets.com We've got a student from Hong Kong staying with us at the moment and the reboots seem coincidental with him starting up his laptop. I say this because a check on ctinets.com shows it to be based in Hong Kong, though our guest's laptop doesn't appear to have any software related to this company installed. I say "apparently" as he is running the Chinese version of Windows and his English doesn't cover technical subjects like this. I know this is an incoming message but I was assuming that it was in response to something on the student's laptop which is why the first thought was malware, but we've got anti virus on all the other machines and have run malwarebytes on his with a negative result so I don't think the problem is due to a virus or (known) trojan. What else can I do to stop this and identify the cause?

  Read the article

• Host multiple domains with Apache on a VPS

  - by Kunal

  Hi I have recently bought a windows VPS and installed apache, mysql using xampp. All services are running fine. I can access the hosted site using the IP of VPS but what I need to do is host multiple domains on that server. Actually my requirement was to use htaccess on a php based site but the site had to access data from ms sql server as well. So needed to enable php_mssql.dll in the php.ini which no shared hosting was supporting. Had to go for this VPS. Plesk was installed by default but as htaccess wont work with IIS, I had to stop IIS service and install apache there. Now all is well, but I need to find a way to host multiple domains there. When I bought the VPS they hosting people sent me the dedicated IP of the server and also I have the 2 name servers required to host domains. What is the next step? Exactly which file I need to modify to get things done? Please help! Any kind of help is much appreciated. Thanks in advance for all of your kind help and time.

  Read the article

• New SBS 2011 installation (not migration) in an existing 2008 R2 domain

  - by Tong Wang

  My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

  Read the article

• best practices for setting up a new windows 2008 R2 server with ec2 AWS

  - by Alex

  Can someone comment what they would add to the following list of SOP in terms of best practices? This is being set up on AWS, and then after further testing, back in our datacenter. Standard Operation Procedure (SOP): Installation Part: 2 - Installation of Software Components in Windows 2008 R2 (Updated). Step: 1 Logon to the host through Remote Desktop. Strp: 2 Open Server Manager - Server Roles - Install Web Server IIS 7.5 with compatible of IIS 6 features and Management compatibility mode. Step: 3 Open IE/Mozilla to Download the below listed software's and save all installation files to folder called "AWS Server Install Files" for future reference.. Net Framework 2.0 (Download that from internet) Crystal reports for .Net Framework 2.0 (x64) (Download that from internet) SQL Server 2005 (AWS Image) Step: 4 Once all software's saved on local drive, then Install it one by one. Step: 5 Navigate to Desktop folder to install the below listed softwares. Microsoft Asp.net 2.0 AjaxExtention 1.0 (placed on Desktop \Softwares) WebEx recorder. (placed on Desktop \Softwares) Winrar(placed on Desktop \Softwares) Step: 6 Make sure all the software are working fine. Step: 7 Inspect the server once entirely. Step: 8 Logoff & Stop the Instance.

  Read the article

• Best way to troubleshoot intermittent network outages?

  - by Ben Scheirman

  We have a Comcast 50/10 line into our office. We keep seeing very short but sometimes frequent drops in our internet service. It's enough to kick you off of skype and stop any websites from loading, which is obviously affecting our productivity. We've tried 4 different routers, we've tried moving everyone off of wireless and onto wired via a switch and so far nothing has helped. Right now we're on a Cisco SB WRP400-G1 router. Attached to the router is a 16 port switch going to the ports in all of the offices. We've moved to OpenDNS in the case that it was the comcast DNS servers going down. Today we tried putting the modem, router, and switch on a UPS to make sure it wasn't power fluctuations that was causing it. Every time we call Comcast, by the time they are here the internet is working fine. I'd like to somehow prove that the problem is with Comcast, so if that means plugging in a machine directly into their router and collecting data all day, I'm up for that. I just want to hear ideas on what tools to run and how to collect this data. I could just continuously ping google.com all day long but I'm not sure how valuable that data would be. Thoughts?

  Read the article

• Is there a list of Windows services that can be turned off to save resources?

  - by scunliffe

  Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

  Read the article

• Sun Power Button Won't Shut Down System

  - by user36680

  Background: We are running NIS and have NFS mounts from a Solaris 10 workstation to a Solaris 8 server. If the workstation loses its network connection for some reason, when I look at the workstation's console I see repeated messages of the form: <date> <time> <hostname> ypbind[<pid>]: NIS server not responding for domain "<domain>"; still trying. If I try to login at the console as a user, it won't work because it can't authenticate my account through NIS. Also, it won't return to a login prompt again, so I can't log in as root. If I press the power button (don't hold it in) on the workstation, I see: <date> <time> <hostname> power: WARNING: Power off requested from power button or SC, powering down the system! Shutdown started. <date> <time> Changing to init state 5 - please wait. <date> <time+2 minutes> <hostname> power: WARNING: Failed to shut down the system! And continue to see messages of the form: <date> <time> <hostname> ypbind[<pid>]: NIS server not responding for domain "<domain>"; still trying. So, the questions are How do I make NIS stop trying (because I know it will fail)? Why won't it shut down?

  Read the article

• How to prevent Gnome-shell's Alt+Tab from grouping windows from similar apps?

  - by wleoncio

  I love pretty much everything about how Gnome Shell handles app-switching through Alt+Tab. My one gripe with it, though, is how it forces the user to use Alt+` to switch between windows of the same app. This is very annoying for me, because now I have to keep in mind if the last window I was using belonged to the same app as the current window or not. Definitely a nuisance for power users who thinks in terms of "windows I'm working with" instead of "applications I'm working on". I've tried the AlternateTab extension ( https://extensions.gnome.org/extension/15/alternatetab/ ), but it's looks way too ugly for me. Not to mention that in the end all I want is to remap Alt+(key above tab) to Alt+Tab on this application. I guess one option would be to just tweak Gnome-shell. My guess is that I should tinker with the altTab.js file at /usr/share/gnome-shell/js/ui/, but the file is too long and overwhelming for someone like me, who doesn't know JavaScript. Does anyone know how I can make Gnome Shell stop grouping windows by applications?

  Read the article

• Package pinning in Debian lenny

  - by bronto

  I need your advice as I don't know if I hit a bug, or I am misunderstanding something. On a Debian Lenny, I am trying to prevent the installation of two particular packages, when they are requested as dependencies fromother packages. I am using the same syntax I successfully used in Squeeze, but with no success at all. On squeeze, the following works as expected: # cat /etc/apt/preferences.d/local-no-pike.pref Package: pike7.6-core Pin: version * Pin-Priority: -1000 If I try to install pike7.6, which depends on pike7.6-core, apt and aptitude refuse to do so. On Lenny, the only difference is that there is no support for "fragments" in /etc/apt/preferences.d, and all preferences must be in the /etc/apt/preferences file. But it's not working. E.g., if the file contains: Package: grub-common Pin: version * Pin-Priority: -1000 apt doesn't stop me from installing grub, which depends on grub-common. I used strace to see if the file is being read, and it is. I was suggested to use some Debug:: options, but they didn't help to pinpoint the problem either. I have google'd a lot with some combinations of "lenny" "prevent" "package" "installation" "pinning" and the like, but nothing nice came out. And of course I read man apt_preferences. What am I missing here?

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Fedora installed in Legacy mode, how to make it work in UEFI?

  - by TryntaLearn

  I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

  Read the article

• No sound out of headphone port on laptop

  - by Thanatos

  I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

  Read the article

• Rebuilding LVM after RAID recovery

  - by Xiong Chiamiov

  I have 4 disks RAID-5ed to create md0, and another 4 disks RAID-5ed to create md1. These are then combined via LVM to create one partition. There was a power outage while I was gone, and when I got back, it looked like one of the disks in md1 was out of sync - mdadm kept claiming that it only could find 3 of the 4 drives. The only thing I could do to get anything to happen was to use mdadm --create on those four disks, then let it rebuild the array. This seemed like a bad idea to me, but none of the stuff I had was critical (although it'd take a while to get it all back), and a thread somewhere claimed that this would fix things. If this trashed all of my data, then I suppose you can stop reading and just tell me that. After waiting four hours for the array to rebuild, md1 looked fine (I guess), but the lvm was complaining about not being able to find a device with the correct UUID, presumably because md1 changed UUIDs. I used the pvcreate and vgcfgrestore commands as documented here. Attempting to run an lvchange -a y on it, however, gives me a resume ioctl failed message. Is there any hope for me to recover my data, or have I completely mucked it up?

  Read the article

• Issues connecting to HP ProCurve switches

  - by BriGuy

  We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

  Read the article

• Virus cleanup; Windows Automatic Updates service crashes in esent.dll

  - by quack quixote

  Background I'm doing system recovery on an old WinXP SP1 system brought to me on suspicion of virus infection. After taking preliminary backups, I used MalwareBytes to detect and clean the infection. I might've even gotten it all. In the process, I've discovered (a) the system drive is showing signs of impending failure, and (b) the owner has been using the system's old crusty IE-6 instead of the up-to-date Firefox I've provided for him. So naturally, thinking I had a relatively stable system, I tried to hit the Windows Update site to install IE-8, in case further training doesn't stick. The update site told me it needed to update the installer, and I started that process. Soon after, wuauclt.exe started crashing, reporting addresses in module esent.dll. There's a Microsoft KB (910437) on a problem with that DLL, so I downloaded the hotfix and installed. The crashing did not stop. I attempted to install SP3 from the offline installer, but that didn't fix the issue either. The system is reporting a few hard drive / IDE controller errors, but they don't correlate to the crashes, so they aren't the direct cause. I've also attempted to rollback to the time between the infection removal and the first crashes, but that doesn't help. Question The hotfix I tried to install dealt with problem in transaction logs of the Extensible Storage Engine (ESE) database. I suspect this issue is similar, but that the database itself (whatever the ESE database is) is corrupted. Is there a way to clean or clear this database so that system operation returns to normal? Can someone enlighten me as to what the ESE database actually is, and where it resides? Can I just locate some files and delete them to bring this under control?

  Read the article

• Short, intermittent USB port timeouts

  - by jacobsee

  I have a data acquisition application controlled by a Windows PC. I am using an Intel Desktop Board DH67CL motherboard. This has 6 USB2 ports along with 2 of the new blue USB3 ports. The DAQ instrument connects via USB to the computer. Roughly once every day or two there is a short communication glitch with the USB that causes the instrument to disconnect briefly and then reconnect. This is logged so I know whenever it happens. Occasionally it will cause the data acquisition to stop. I've verified that the glitches will go away if I use the USB3 ports, or if I use a PCI add-on card with USB ports. So it seems that there is something going on with these built-in USB2 ports on this motherboard. I haven't yet had a chance to test with other motherboards. My question: what could be causing these glitches and how to get rid of them for this board, or is there a better motherboard to use? We have standardized on the DH67CL because it's inexpensive, has 3 PCI slots that we need, and is readily available. We don't need the power of higher-end server boards but reliability is important. Thanks. Update: This problem has been reproduced many times on different hardware, though we always use the same model of motherboard (DH67CL) and power supply (Antec EA-430D). I don't think the power requirements are very high but will check on that.

  Read the article

• dnsmasq Client TTL

  - by user548971

  I have a situation where my hosts file is constantly changing. Because of this I don't want clients to cache ip addresses resolved using the hosts file. Here is the command that starts dnsmasq for me: /usr/sbin/dnsmasq -K -R -y -Z -b -E -S 8.8.8.8 -l /tmp/dhcp.leases -r /tmp/resolv.conf.auto --stop-dns-rebind --rebind-localhost-ok --dhcp-range=lan,192.168.2.2,192.168.2.249,255.255.255.0,12h -2 eth0 In looking at this site: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html I see that the -T option has this description: -T, --local-ttl=<time> When replying with information from /etc/hosts or the DHCP leases file dnsmasq by default sets the time-to-live field to zero, meaning that the requester should not itself cache the information. This is the correct thing to do in almost all situations. This option allows a time-to-live (in seconds) to be given for these replies. This will reduce the load on the server at the expense of clients using stale data under some circumstances. My command doesn't have the -T option. Do I need it or does dnsmasq default TTL to zero without it?

  Read the article

• Is there any proper documentation for mod-evasive?

  - by Question Overflow

  mod_evasive20 is one of the loaded modules on my httpd server. I read good things about how it can stop a DOS attack and wanted to try it out on my localhost. A search for mod_evasive turns up a blog post by the author which briefly describes what it does. Other than that, I can't seem to find a reference or a documentation on the apache modules site. I was wondering whether it is a module recognised by Apache since there is no mention of it on its website. I have a mod_evasive.conf file sitting in the /etc/http/conf.d folder that contains the following lines: LoadModule evasive20_module modules/mod_evasive20.so <IfModule mod_evasive20.c> DOSHashTableSize 3097 DOSPageCount 2 DOSSiteCount 50 DOSPageInterval 1 DOSSiteInterval 1 DOSBlockingPeriod 10 </IfModule> My understanding from the setting is that if I were to click refresh or send a form more than two times in a one second interval, apache will issue a 403 error and bar me from the site for 10 seconds. But that is not happening on my localhost. And I would like to know the reason. Thanks.

  Read the article

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• Exchange 2003 automatically converts text/plain emails to text/html for IMAP retrieval

  - by wfaulk

  When accessing an Exchange 2003 server via IMAP, emails that were sent as text/plain (and ones that had no MIME encoding specified at all) get automatically converted to multipart/alternative with the original text/plain body and a text/html body. This is … stupid. It doesn't even bother to specify a monospaced font. The new MIME part starts like this: Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 6.5.7654.12"> <TITLE>{{subject}}</TITLE> </HEAD> <BODY> <!-- Converted from text/plain format --> <BR> <P><FONT SIZE=3D2>{{body}} (All the "3D" stuff is quoted-printable encoding for an equals sign; there's nothing wrong on that front, surprisingly.) How can I make this stop?

  Read the article

• Server Crash Diagnosis...Are there any 'black box recorder' style programs available.

  - by columbo

  My redhat server is crashing every three weeks or so at 4:15am ish on Sunday mornings. (well it was sundays the last two have been Thursday mornings at 4:15ish) Looking at the logs (mysql, httpd, messages) there are no clues as to why. They just seem to stop. I ran a little script to take memory readings every 15 minutes and it too stops (with normal readings) at this time. The server is remote at a provider so I can only access it via the web. I use Plesk. It appears to be a set job or something that is causing the issue. I can see nothing in crontab. So my question is...has anyone else had this and can offer advice? Failing that. Does any one know of a way to get more detailed logging than that offered by the messages file? I was thinking of a black box style recording program or maybe something as simple as an option somewhere to increase the level of reporting in the messages log. Thanks

  Read the article

• How can I configure Samba to share (read/write) any folder with root permissions?

  - by Mike Toews

  I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

  Read the article

• I have a password protected USB drive with hidden partition, how to convert to normal USB drive?

  - by deddebme

  I have a generic USB drive which has password protection, and I want to stop this password protection mechanism and to use it as a normal 8GB USB drive. I received this USB drive as a gift in Hong Kong, and there was no instruction menu whatsoever, not even the manufacturer name. When I plug the drive in Windows XP, the removable drive comes up as a read only 5.28MB partition with two files. When I try to add or remove any files or formatting it, it will says the drive is write protected. After launching the Login.exe and typed in the password, a 8GB read/writeable partition will be shown, and I'm free to do anything to it. But once after the drive is unplugged and replugged, the same read only partition will still comes out no matter what I did to the hidden partition. Anyone knows about this kind if USB drive? What did the manufacturer do to hide the partition? Is there a way to "low-level" formatting this drive to convert (or revert) it to a normal drive? Before typing in the password: After typing in the password:

  Read the article

• apache virtualhost: Auto subdomain with exception

  - by Ineentho

  I've been searching for a way to automatically redirect domains to a specific folder, and fond a good answer here on serverfault: Apache2 VirtualHost auto subdomain. (The accepted answer) So far everything works good, however now I need to add an exception to this. The result I want is this: http://localhost/ --> E:/websites/ http://specialDomain2/ --> E:/websites/ http://normal1.com/ --> E:/websites/normal1.com/ http://normalDomain.com/ --> E:/websites/normal2.com/ I get the expceted result for the two last domains, but the localhost doesn't work. I copied the script from the question aboved, and tried to add something like <VirtualHost *:80> RewriteEngine On RewriteMap lowercase int:tolower # if already rewitten and we have the right path, stop right here RewriteRule ^(E:/websites/[^/]+/.*)$ $1 [L] RewriteRule ^localhost/(.*)$ E:/websites/$1 [L] # <-- Added this row RewriteRule ^(.+) ${lowercase:%{SERVER_NAME}}$1 [C] RewriteRule ^(www\.)?([^/]+)/(.*)$ E:/websites/$2/$3 [L,E=VHOST_ROOT:E:/websites/$2/] </VirtualHost> I thought this would make sense, since I would translate this to if URL = localhost/* Do nothing (because of the [L] flag), and use the default document root specified earlier else continue What's wrong with this? Thanks for any help!

  Read the article

• Setup my domain at Whois.com as nameservers for a Dedicated Server with Kloxo

  - by BoDiE2003

  Hello, this is my first time at ServerFault, I'm a stackoverflow user. I'm faceing the next problem and may be its me, but I can't find proper guides to set up a domain and nameservers for a dedicated box. I have a domain, at whois.com, and a Dedicated server at Reliable Hosting Services, the server has 5 IPs, I know that I need 2 of them for the nameservers. Right now, my domain at whois.com is using nsX.whois.com nameservers and it has 2 child nameservers: ns1.mydomain.com & ns2.mydomain.com pointing to those 2 IPs from my Server. Whats next? I still cannot set that domain as my main server domain since it says: To map an IP to a domain, the domain must ping to the same IP, otherwise, the domain will stop working. The domain you are trying to map this IP to, doesn't resolve back to the IP, and so it cannot be set as the default domain for the IP. Well and I'm stuck on those steps, whats next to have my nameservers working and my main domain assigned to my server? Thank you very much and happy new year!!

  Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >