Search Results

Search found 27148 results on 1086 pages for 'input field'.

Page 382/1086 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Help deciding on language for a complex desktop - web application

  - by user967834

  I'm about to start working on a fairly complex project needing a desktop GUI as well as a web interface and I need to decide on a language(s) to use. This is from an electrical engineering/robotics background. These are the requirements: Program will have to read data from multiple sensors and inputs (motion sensor, temperature sensor, capacitive sensor, infrared, magnetic sensors, etc) through a port on a computer - so either through USB or ethernet. Program will have to be able to send control signals based on this input. Program will have to continuously monitor all input signals at all times - so realtime data. Program will require authentication. Program will need to be controllable from a web interface from anywhere via logging in to a website. Web interface will also need to have realtime feedback once authenticated. What language do you think would best accomplish this? I was thinking maybe saving everything into a database which can be accessed by both the desktop and web app? And would Python be able to do all of this? Or something like a remote desktop app? I know this is a complex project but let's assume I can learn any language. Has anyone done something like this and if so how did you accomplish it?

  Read the article

• How YouTube Can Help With SEO

  With over 21 billion web pages on the internet, the competition to gain the best page rank in each industry's field is immense. There are several SEO (Search Engine Optimisation) techniques that when combined can dramatically improve your position on the leading search engines.

  Read the article

• Is there any reason in a Java program for a special naming for a function arguments?

  - by gasan

  I'd like to know, why would I want to have a special prefixes for a function arguments, like "p_name", "p_age", "p_sex"? On the one hand it helps to distinguish parameter from local variable or field further in the function body, but would it help? On the other hand, I didn't saw such naming recommendations anywhere including official Java language conventions. Please advise any reasons for using such naming policy

  Read the article

• Do I need to go to a big-name university?

  - by itaiferber

  As a soon-to-be graduating high school senior in the U.S., I'm going to be facing a tough decision in a few months: which college should I go to? Will it be worth it to go to Cornell or Stanford or Carnegie Mellon (assuming I get in, of course) to get a big-name computer science degree, internships, and connections with professors, while taking on massive debt; or am I better off going to SUNY Binghamton (probably the best state school in New York) and still get a pretty decent education while saving myself from over a hundred-thousand dollars worth of debt? Yes, I know questions like this has been asked before (namely here and here), but please bear with me because I haven't found an answer that fits my particular situation. I've read the two linked questions above in depth, but they haven't answered what I want to know: Yes, I understand that going to a big-name college can potentially get me connected with some wonderful professors and leaders in the field, but on average, how does that translate financially? I mean, will good connections pay off so well that I'd be easily getting rid of over a hundred-thousand dollars of debt? And how does the fact that I can get a fifth-years master's degree at Carnegie Mellon play into the equation? Will the higher degree right off the bat help me get a better-paying job just out of college, or will the extra year only put me further into debt? Not having to go to graduate school to get a comparable degree will, of course, be a great financial relief, but will getting it so early give it any greater worth? And if I go to SUNY Binghamton, which is far lesser-known than what I've considered (although if there are any alumni out there who want to share their experience, I would greatly appreciate it), would I be closing off doors that would potentially offset my short-term economic gain with long-term benefits? Essentially, is the short-term benefit overweighed by a potential long-term loss? The answers to these questions all tie in to my final college decision (again, permitting I make it to these schools), so I hope that asking the skilled and knowledgeable people of the field will help me make the right choice (if there is such a thing). Also, please note: I'm in a rather peculiar situation where I can't pay for college without taking out a bunch of loans, but will be getting little to no financial aid (likely federal or otherwise). I don't want to elaborate on this too much (so take it at face value), but this is mainly the reason I'm asking the question. Thanks a lot! It means a lot to me.

  Read the article

• Issues in pulse audio in Ubuntu 11.10

  - by Kamal

  Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

  Read the article

• How to explain bad software to non-technical people?

  - by mtutty

  In discussing software development with non-technical people (customers, business owners, project sponsors, etc.), I often resort to analogies and metaphors. It's relatively easy and effective to use a "house" or other metaphor for describing the size and complexity of new development. However, we often inherit someone else's code or data, and this approach doesn't seem to hold up as well when trying to explain why we're gutting something that already seems to work. Of course we can point to cycle time and cost to be saved in the future but this generally means nothing to business folks. I know doctors can say "just take this pill," but I'm not sure that software devs have the same authority. Ideas? EDIT: Let me add a bit to the discussion. The specific project I'm talking about has customers that don't realize (or care) about specific aspects of the system we're retiring (i.e., they think it was just fine): The system would save a NEW RECORD every time someone updated a field The system contained tables for reference data. These tables had new records added every day, even though they were duplicates of previous records. And there was no way to tie the reference data used for a particular case at the time it was closed. This is like 99% of the data in the old system. The field NAMES also have spaces, apostrophes and other inappropriate characters in them, making everything harder to work with. In addition to the incredible amount of duplicate data, they have around 1000 XLS files with data they want added to the system. Previously, they would do a spreadsheet for each case in the database, IN ADDITION TO what they typed into the database. Getting rid of this old, unneeded information and piping in the XLS data comprises about 80% of the total project effort, and was not something we could accurately predict. I'm trying to find a concrete way to describe how bad this thing was, mostly so that the customer will understand why the migration process has been so time-consuming. The actual coding was done pretty quickly and the new system works fine, but without the old data they won't be happy. Sorry to get into the weeds, but most of the answers I've seen so far are pretty basic scope/schedule/cost things. I've been doing this for 15 years, so this really is more of a reflective, philosophical question - but without some of the details it can be difficult to really appreciate the awful beauty of this problem.

  Read the article

• Languages with a clear distinction between subroutines that are purely functional, mutating, state-changing, etc?

  - by CPX

  Lately I've become more and more frustrated that in most modern programming languages I've worked with (C/C++, C#, F#, Ruby, Python, JS and more) there is very little, if any, language support for determining what a subroutine will actually do. Consider the following simple pseudo-code: var x = DoSomethingWith(y); How do I determine what the call to DoSomethingWith(y) will actually do? Will it mutate y, or will it return a copy of y? Does it depend on global or local state, or is it only dependent on y? Will it change the global or local state? How does closure affect the outcome of the call? In all languages I've encountered, almost none of these questions can be answered by merely looking at the signature of the subroutine, and there is almost never any compile-time or run-time support either. Usually, the only way is to put your trust in the author of the API, and hope that the documentation and/or naming conventions reveal what the subroutine will actually do. My question is this: Does there exist any languages today that make symbolic distinctions between these types of scenarios, and places compile-time constraints on what code you can actually write? (There is of course some support for this in most modern languages, such as different levels of scope and closure, the separation between static and instance code, lambda functions, et cetera. But too often these seem to come into conflict with each other. For instance, a lambda function will usually either be purely functional, and simply return a value based on input parameters, or mutate the input parameters in some way. But it is usually possible to access static variables from a lambda function, which in turn can give you access to instance variables, and then it all breaks apart.)

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• Multiple vulnerabilities in Firefox

  - by Ritwik Ghoshal

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2012-3982 Denial of service (DoS) vulnerability 10.0 Firefox Solaris 10 SPARC: 145080-13 X86: 145081-12 CVE-2012-3983 Denial of service (DoS) vulnerability 10.0 CVE-2012-3986 Permissions, Privileges, and Access Controls vulnerability 6.4 CVE-2012-3988 Resource Management Errors vulnerability 9.3 CVE-2012-3990 Resource Management Errors vulnerability 10.0 CVE-2012-3991 Permissions, Privileges, and Access Controls vulnerability 9.3 CVE-2012-3992 Permissions, Privileges, and Access Controls vulnerability 5.8 CVE-2012-3993 Design Error vulnerability 9.3 CVE-2012-3994 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2012-3995 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4179 Resource Management Errors vulnerability 10.0 CVE-2012-4180 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4181 Resource Management Errors vulnerability 10.0 CVE-2012-4182 Resource Management Errors vulnerability 10.0 CVE-2012-4183 Resource Management Errors vulnerability 10.0 CVE-2012-4184 Permissions, Privileges, and Access Controls vulnerability 9.3 CVE-2012-4185 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4186 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4187 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4188 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 10.0 CVE-2012-4192 Permissions, Privileges, and Access Controls vulnerability 4.3 CVE-2012-4193 Design Error vulnerability 9.3 CVE-2012-4194 Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability 4.3 CVE-2012-4195 Permissions, Privileges, and Access Controls vulnerability 5.1 CVE-2012-4196 Permissions, Privileges, and Access Controls vulnerability 5.0 This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page. Note: Solaris 10 patches SPARC: 145080-13 X86: 145081-12 contain the fix for all CVEs between Firefox version 10.0.7 and 10.0.12.

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• SQL SERVER Difference Between DATETIME and DATETIME2 WITH GETDATE

  Earlier I wrote blog post SQL SERVER Difference Between GETDATE and SYSDATETIME which inspired me to write SQL SERVER – Difference Between DATETIME and DATETIME2. Now earlier two blog post inspired me to write this blog post (and 4 emails and 3 reads from readers). I previously populated DATETIME and DATETIME2 field with SYSDATETIME, [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• project management for rookie

  - by macindows

  I'm new at the field of computer programming and I chose to learn it at the University, but I have some problems with project management, usually before I write any code I start to plan it on the paper, and when I'm finished I begin to code, but I understood that usualy I write only 20-30 percent from my planning, and I change my code a lot, can somebody recommend me a good book or blog about commong pitfalls and troubles with software planning and management.

  Read the article

• Technologies stack to create soccer game vizualization on web page [on hold]

  - by Lambrusco

  I want to create soccer game vizualization. What technologies will be best to create such one for web page? On input I have two teams with players. I have theory about their movements, the movement of the ball on field and so on. I just want to vizualize their movements. What will be the best technology stack? I mean programming languages (C++, Ruby, Java, PHP) and vizualization ways (Flash, HTML5, JS)

  Read the article

• Different domain for dirrenet thing or just one?

  - by Mahdi

  Suppose I'm starting my business my major is computer services like: graphic , programming, computer repair , networking and.... now the question is, what do you recommend for a better ranking? should i have a separate domain for each of these field or i can have them all in different pages/categories in one website? my preferred CMS system is Wordpress. and...do you recommend me using keywords in domain name even if it becomes hard to remember, meaningless and long? Thanks

  Read the article

• Wireless controllers vs wireless usb hub

  - by David Jensen

  For my htpc i currently only have a steerin wheel as a controller. This is wired and it looks really bad having extended usb wires from the tv to the table. However im thinking of bying some new Gamepads and now comes the question. Should i buy wireless ones or wired and connect them to a wireless usb hub? Having a wireless hub would let me manage my gamepads easily from the couch. A wireless hub also allows me to connect other things that are not input devices from the couch. However im wondering if wireless usb hubs may not be made for input devices in the way that they may not have 100% uptime and probably some delay. Am i right about this?

  Read the article

• What legal considerations do I need to have when programming?

  - by JustJohn

  Recently I worked with a group to create a logging system for tutoring labs to track Tutor hours, and usage of the labs. We had to change the design a fair amount to be in compliance with FERPA. My question stems from the curiosity that in my course of study there has never been a real mention of how people in this field have to deal with complying with the law in their work. So I would like to know how much programmers have to consider the law in the work they do.

  Read the article

• What implementation problems are still soaking up all of your time?

  - by Conor

  What implementation problems has the industry claimed to have solved many times, but are still soaking up all of your time? Examples: Cross platform GUI - mobile devices have blown this issue wide open. OO to RDBMS mapping - how do I map this attribute to that field in that database using that framework. You get the idea. Interface definitions - ..., CORBA, COM, EJB, WSDL, ..., etc Can you think of any others?

  Read the article

• XNA - 2D Rotation of an object to a selected direction

  - by lobsterhat

  I'm trying to figure out the best way of rotating an object towards the directional input of the user. I'm attempting to mimic making turns on ice skates. For instance, if the player is moving right and the input is down and left, the player should start rotating to the right a set amount each tick. I'll calculate a new vector based on current velocity and rotation and apply that to the current velocity. That should give me nice arcing turns, correct? At the moment I've got eight if/else statements for each key combination which in turn check the current rotation: // Rotate to 225 if (keyboardState.IsKeyDown(Keys.Up) && keyboardState.IsKeyDown(Keys.Left)) { // Rotate right if (rotation >= 45 || rotation < 225) { rotation += ROTATION_PER_TICK; } // Rotate left else if (rotation < 45 || rotation > 225) { rotation -= ROTATION_PER_TICK; } } This seems like a sloppy way to do this and eventually, I'll need to do this check about 10 times a tick. Any help toward a more efficient solution is appreciated.

  Read the article

• Wubi installation broken by update - now unable to mount

  - by Outspaced

  As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

  Read the article

• Any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango?

  - by Programmer

  Are there any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango? The advantages of Bango I have seen compared to regular Credit Card solutions that make it considerably "mobile-friendly" are: 1) It does not require the user to enter their full name and billing address to make a payment. The user is only required to enter their Credit Card number, expiration date, and CVC code (if they are in the U.S., they will also have to enter their Zip Code). That is significantly less input than is normally required for Credit Card payments, which is a big plus on small mobile key pads. After a user makes an initial Credit Card payment, their details are stored by Bango, and the next time the user needs to make a payment with the same Credit Card, they just have to click a single link and it processes the payment on their stored Credit Card. Needless to say, this is very convenient for mobile users as it is analogous to Direct Carrier Billing as far as the user is concerned since they won't need to input any details. The downside with Bango is that their fees are higher than others, all payments must be processed via their site and branding, there is a high minimum ($1.99) and a low maximum ($30) on how much you can charge users, and you need to pay a monthly fee on top of the high transaction costs. It is due to the downsides mentioned above that I am looking for an alternative solution that also does the advantages 1) and 2) above. Is there anything like that? I looked at JunglePay and they do neither 1) nor 2).

  Read the article

• Make Gameobject Stand On Surface Facing Certain Direction

  - by Julian

  I want to make a biped character stand on any surface I click on. Surfaces have up vectors of any of positive or negative X,Y,Z. So imagine a cube with each face being a gameobject whose up vector pointing directly away from the cube. If my character is facing "forward" and I click on a surface which is to the left or right of me ( left or right walls), I want my character to now be standing on that surface but still be facing in the direction he initially was. If I click on a wall which is in the forward path of my character i want him to now be standing on that surface and his forward to now be what was once "up" relative to my character. Here is the code I am working with now. void Update() { if (Input.GetMouseButtonUp (0)) { RaycastHit hit; var ray = Camera.main.ScreenPointToRay(Input.mousePosition); if (Physics.Raycast(ray, out hit)) { Vector3 upVectBefore = transform.up; Vector3 forwardVectBefore = transform.forward; Quaternion rotationVectBefore = transform.rotation; Vector3 hitPosition = hit.transform.position; transform.position = hitPosition; float lookDifference = Vector3.Distance(hit.transform.up, forwardVectBefore); if(Vector3.Distance(hit.transform.up, upVectBefore) < .23) //Same normal { transform.rotation = rotationVectBefore; } else if(lookDifference > 1.412 && lookDifference <= 1.70607) //side wall { transform.up = hit.transform.up; transform.forward = forwardVectBefore; } else //head on wall { transform.up = hit.transform.up; transform.forward = upVectBefore; } } } } The first case "Same normal" works fine, however the other two do not work as I would like them to. Sometimes my character is laying down on the surface or on the wrong side of the surface. Does anyone know nice way of solving this problem?

  Read the article

• Write to stdin of a running process using pipe

  - by aditya

  I am in a similar situation as in this post But I couln't get the solution provided there to work in my situation as the answer seems related to that question only. In particular, I couldnt understand what was the purpose of cat my.fifo | nc remotehost.tld 10000 In my case, I have a process running and waiting for input. how can I send input to that process using named pipes? I've tried echo 'h' > /proc/PID/fd/0 it just displays 'h' on the process' window.

  Read the article

• Seperation of drawing and logic in games

  - by BFree

  I'm a developer that's just now starting to mess around with game development. I'm a .Net guy, so I've messed with XNA and am now playing around with Cocos2d for the iPhone. My question really is more general though. Let's say I'm building a simple Pong game. I'd have a Ball class and a Paddle class. Coming from the business world development, my first instinct is to not have any drawing or input handling code in either of these classes. //pseudo code class Ball { Vector2D position; Vector2D velocity; Color color; void Move(){} } Nothing in the ball class handles input, or deals with drawing. I'd then have another class, my Game class, or my Scene.m (in Cocos2D) which would new up the Ball, and during the game loop, it would manipulate the ball as needed. The thing is though, in many tutorials for both XNA and Cocos2D, I see a pattern like this: //pseudo code class Ball : SomeUpdatableComponent { Vector2D position; Vector2D velocity; Color color; void Update(){} void Draw(){} void HandleInput(){} } My question is, is this right? Is this the pattern that people use in game development? It somehow goes against everything I'm used to, to have my Ball class do everything. Furthermore, in this second example, where my Ball knows how to move around, how would I handle collision detection with the Paddle? Would the Ball need to have knowledge of the Paddle? In my first example, the Game class would have references to both the Ball and the Paddle, and then ship both of those off to some CollisionDetection manager or something, but how do I deal with the complexity of various components, if each individual component does everything themselves? (I hope I'm making sense.....)

  Read the article

• Great Functionalities Of Kindle Portable Reader

  Technology has never stopped enhancing people?s way of life as the years go by. It has significantly contributed a lot in the field of reading by converting the printed books into something that is c... [Author: Ben Dave - Computers and Internet - June 02, 2010]

  Read the article

• Limiting and redirect port access with useragent

  - by linuxcore

  I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >