Search Results

Search found 13940 results on 558 pages for 'pci security'.

Page 384/558 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• What's the situation that requires stateful firewall?

  - by Eonil

  I just know there is two kind of firewalls. Stateless and stateful. It's hard to determine what kind of firewall I have to use. Currently I have to run firewall within same machine runs services, Basically I want stateless because of its less resource consumption. However if it is not sufficient for security, it's meaningless. I'll run HTTP, SSH, NFS (only over SSH), and some custom made server on several TCP/UDP ports. Should I use stateful firewall? (edit) Maybe the question can be assumed as 'Should I use stateful rules?'.

  Read the article

• Can you have a WMI query for GPO Filter based on user's OU?

  - by Jordan Weinstein

  I'm wondering if there is a way to have a WMI query check the OU of the user logging on. I'd like a GPO (linked to Citrix servers OU) to apply only to users if the user is in a certain OU - this is for Citrix so the overly obvious answer of - well just link it to the OU the user is in does not apply. This also cannot be done using security groups because a long time ago those started to get used as Distribution Groups also and now too many are widely inaccurate. Lastly I need to apply this to the entire GPO as there are more than just group policy preferences included so I can't use the item-level targeting feature either. But my OUs are accurate so I'd like to use those if I can. I'd like a WMI query filter to say, apply GPO if user is member of OU 'x' that doable?

  Read the article

• users unable to add registry keys to HKCU

  - by Eds

  I may not have this 100% correct so need some clarification. Are normal users on a 2003 terminal server allowed to add registry keys the their own HKCU section in the registry, or are they only allowed to edit existing ones? The reason I ask is that we have 3 keys that we need to add for each user on login. I thought it would be as simple as having a straightforward batchscript run that silently adds the keys for the user. Here is what I used: regedit.exe "C:\Documents and Settings\All Users\Desktop\example.reg" When the user runs this batch scipt, they see nothing as you would expect, but the keys are not added. If I simply run the .reg file as the user, it asks if I want to add the key, but then has an error saying there was an error accessing the registry. Do I need something a bit more complex to accomplish this task. Many Thanks Eds EDIT: Contents of .reg file Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\outlook\Security] "PromptSimpleMAPINameResolve"=dword:00000002 "PromptSimpleMAPIOpenMessage"=dword:00000002 "PromptSimpleMAPISend"=dword:00000002

  Read the article

• Debian is equal to Ubuntu

  - by rkmax

  The title of the question is confusing, and does not explain my point well. I've always used Ubuntu server from version 10.04 and never had problem, now I have 4 machines with ubuntu 12.04.1 LTS installed on them and I found that under any circumstances where there is a high burden throws me a problem and machine crashes constantly. the most common is CPU#X stuck for Ns! Now I wonder if the administration of Debian is equal to that of ubuntu, regarding Servicos, packages, folders structure for example I would like to know if the services are installed in the same manner using invoke-rc.d, which handles additional security, including for not giving blind caning. I've been looking for a comparison chart but have not found anything yet, something between Debian 6.0.6 and Ubuntu 12.04 also the most common "hiccups" when you install the system

  Read the article

• How to set my Ubuntu account to super user at all times?

  - by iaddesign

  I have the latest Ubuntu installed and I'll be the only one using it off the network. My question is: how can I make myself super user at all times? Because when I try to delete a file it says I don't have privileges to do so. I know you are going to say it's a security risk but I'm off the network and want to learn all that I can. I don't want to delete the files through the terminal but want to do it through the user interface/explorer. I've installed LAMP and can't copy my site to the www directory. I've tried to remove the preinstalled index file and it won't let me.

  Read the article

• rkhunter warns of inode change by no file modification date changes

  - by Nicholas Tolley Cottrell

  I have several systems running Centos 6 with rkhunter installed. I have a daily cron running rkhunter and reporting back via email. I very often get reports like: ---------------------- Start Rootkit Hunter Scan ---------------------- Warning: The file properties have changed: File: /sbin/fsck Current inode: 6029384 Stored inode: 6029326 Warning: The file properties have changed: File: /sbin/ip Current inode: 6029506 Stored inode: 6029343 Warning: The file properties have changed: File: /sbin/nologin Current inode: 6029443 Stored inode: 6029531 Warning: The file properties have changed: File: /bin/dmesg Current inode: 13369362 Stored inode: 13369366 From what I understand, rkhunter will usually report a changed hash and/or modification date on the scanned files to, so this leads me to think that there is no real change. My question: is there some other activity on the machine that could make the inode change (running ext4) or is this really yum making regular (~ once a week) changes to these files as part of normal security updates?

  Read the article

• how to change the default open-with program to a program on the second disk

  - by Scott????

  I have a 250GB HDD for my system and a 60GB SSD using a SATA port. I installed most of my applications on the SSD. There's a strange thing though. I can not change the default open-with program to a program which is on the SSD. I think it may be caused by permission so I gave my user a 'full control' permission on the security tab in disk properties. But changing permissions is not work. After I choose an application (I've tried Notepad++, Sublime, 7Zip, etc.), nothing is added in the below window: Also, if I install 7Zip on my machine, the right click menu items can not be added.

  Read the article

• Configuring sendmail to use one outbound MTA exclusively

  - by Charlie Martin

  I have a sendmail problem, and I'm anything but a sendmail guru -- I could use some help. My problem is that I have a system intended to be more or less an "appliance" -- it's not intended to have an admin. Because of this, it needs to be able to "call home" by sending email. As we have configured it, this works fine -- using sendmail, it finds the appropriate relay by looking up an MX record and everything works fine. Now, however, because of security concerns, we want to limit it to using exactly one relay, so for example relay.corp.example.com. Should the user configure it to use, say, fubar.example.com, the mail sending should fail or be deferred. I thought that by configuring sendmail with a /etc/mail/server.switch file containing hosts files without dns, I'd get that effect. This doesn't work -- instead, if it gets mail addressed to [email protected], it tries to talk directly to example.com, and ignores the configured server. Any ideas?

  Read the article

• EC2 server in VPC stops responding after joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• Client side certificates in client browsers with unix server for management

  - by user146253

  We are currently running Unix dedicated servers for everything (Web cluster, database, FTP, batch, ...) except for a Microsoft Active Directory Certificate Services. The sole purpose of this Windows box is to provide client side certificates to our clients browsers. All our clients are required to install a client side certificate on order for them to be able to access our website. Is there an alternative in the Unix space? The purpose is to make sure only the approved hardware of an approved client can access our website. I'm open for any solution that provides me with this level of security. We are however talking about thousands of certified computers just so you can factor that in in a proposed solution. Optionally we would also like to be able to revoke access. With Regards.

  Read the article

• Unable to FTP, any ideas?

  - by Nick

  I'm using Windows Server 2003. I have the FTP services installed, router set to DMZ, and currently Anonymous logins allowed. (I know, security risk, but there's nothing important on there and not worried at the moment) So here's the thing... I can ftp to my computer, list directory, get files etc, BUT only if I'm using the command prompt. If I try to log in using IE or any FTP client it's just timing out. I've tried: username@ipaddress ipaddress username:password@ipaddress and not able to get any of them to work. Anyone have any ideas? Thanks!!!

  Read the article

• Restrict VPN Clients to VPN Server

  - by Sprotty

  I've setup a VPN server using Debians pptpd. This all works, but I want to restrict incoming connections so they can only access ports on the VPN server and not get access to other machines on the VPN servers local network. I'm guessing this is a firewall rule? but i'm new to linux so am struggling a bit... ---- Additional info ----- The VPN Server is also hosting an SVN server, which is its real purpose, and the only service I want it to expose to incoming connections. I guess I could expose the SVN server directly, but I'm not confident that I could secure this correctly, so a VPN seemed to give an additional layer of security.

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• login as rsh in rhel 6 without entering password

  - by cartmancakes

  I need to be able to login to a RHEL 6 server using rsh (please don't flame me about security, it's irrelevant in this particular instance) as root without having to enter a password. My procedure for setting this up works great in RHEL 5.x, but does not work in RHEL 6. I suspect this has something to do with PAM, but I'm inexperienced with how to use PAM. Can someone help me with this? /etc/pam.d/rsh auth required pam_rhosts.so auth required pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session /etc/pam.d/rlogin auth required pam_nologin.so auth [user_unknown=ignore success=ok ignore=ignore auth_err=die default=bad] pam_securetty.so auth sufficient pam_rhosts.so auth include common-auth auth required pam_mail.so account include common-account password include common-password session required pam_loginuid.so session include common-session Thanks!

  Read the article

• samba - join domain - automatically set workgroup

  - by ftiaronsem

  Hell alltogether Since I have to do this often, I want to automate the joining to a windows domain as much as possible. While joining a domain one has to specify realm = in the /etc/smb.conf, along with some other settings like security=ads. Among these settingst there is workgroup = My question is: Is it possible to fill this field automatically by samba, while joining a domain? Normally I would just have said never, but as I tried leaving this field blank while joining a domain, i got: Failed to join domain: Invalid configuration ("workgroup" set to '', should be 'BLABLA') and configuration modification was not requested This has made me wondering whether an automatic modification is possible and if so how? A search on the internet and the man page brought no results. It would be really great, if someone could answer that. Thanks in advance ftiaronsem

  Read the article

• Creepy MySQL error during hard work

  - by Kiewic

  Hi, I have a MySQL database installed on a OpenSuse 11.1 server (it is a Bitnami image). The database works fine, it can stay many days without any error, but when MySQL receives a huge amount of transactions, it dies immediately. The next screen shows the error: Moreover, I don't know how to restart MySQL. I have tried this: /opt/bitnami/mysql/bin/mysqld start But it doesn't work, that gives me the next output: 110209 17:09:01 [ERROR] Fatal error: Please read "Security" section of the manual to find out how to run mysqld as root! 110209 17:09:01 [ERROR] Aborting 110209 17:09:01 [Note] /opt/bitnami/mysql/bin/mysqld.bin: Shutdown complete It doesn't matter which kind of statements are executing, if they are a huge amount, MySQL dies. The MySQL server version is 5.1.30 What can be causing these sudden failures?

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• Run a command from Windows 7 Start Menu

  - by Abhijeet Patel

  I'm trying to run commands such as "cmd.exe", "appwiz.cpl" etc by typing it in the Search box of the Start Menu in Windows 7 (x86). I'm able to do this just fine in Vista. After typing in "cmd" I notice that I see a link to "Programs" in the start menu so it seems that "cmd" is being recognized but when I click on "Programs" link which is shown,I get the following message. "These files can't be opened. Your internet security settings prevented one or more files from being opened" P.S. - I'm not looking for enabling the "Run" command to show in the Start Menu Any help would be much appreciated

  Read the article

• How do I create certificates for both ends of an stunnel connection?

  - by unixman83

  Hi. I am using stunnel to authenticate RDP (Remote Desktop) and I need to verify that a client possesses the proper credentials. So people cannot brute force into the machine. I am also using a bad (outdated) version of RDP that has security vulnerabilities, so stunnel is a must. I will preshare the necessary .pem's between machines. What are the openssl commands I need to create the right .pem files on both the client and on the server? What files need to be shared?

  Read the article

• Remote Access Without Explicit Permission: Convenience or Liability?

  - by routeNpingme

  For outsourced professional IT remote support, one habit most new technicians get into is the "instead of getting the user to start up remote support each time, I'll go ahead and install LogMeIn / GoToMyPC / Remote Desktop / whatever so that if they call again, I can just jump on and help them". This of course opens up a potential liability because a client PC on a network that we don't own is being accessed without a user explicitly providing permission by clicking a "Yes, allow technician to control my PC" option. I realize the rules totally change when you're an IT admin over a network that you "own", but this is outsourced IT support. Just curious what others' policies are. Is this an acceptable practice for convenience and I'm turning into one of those "security is more important than anything" people, or is this really a liability?

  Read the article

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• ASP.NET MVC multi-instance session management on amazon ec2

  - by gandil

  I have a web application written in asp.net mvc2. Currently hosted on amazon cloud ec2. Because of growing traffic we want move multi instance enviorenment. I have a custom session class which currently initiate at session start (global asax) and i am using via getter or setter class in application. Because of multi instance chore i have to handle hole security architecture. I am looking a better way to handle this problem. I am looking for good implementation of session and how to apply on amazon ec2 multi instance environment. What is road blocks for system architecture?

  Read the article

• How can I persist certificates in Java's cacerts?

  - by Alan Spark

  We need to have a certificate in Java's cacerts keystore for one of our servers that is authenticated by LDAP. We are using Ubuntu server. We have successfully done this by updating the cacerts file in /usr/lib/jvm/java-6-openjdk-amd64/jre/lib/security but occasionally a Java update is installed and the cacerts file seems to be getting replaced by a default one that doesn't contain our changes. This doesn't happen very often but it is becoming a bit of a pain when it does happen. Is there a better way of adding things to cacerts so that they don't get lost when a Java update happens? Thanks, Alan

  Read the article

• After virus, Chrome & Internet Explorer won't connect to the internet, but Firefox works fine.

  - by Zack

  I cannot connect to the internet with Chrome or Internet Explorer. Firefox works fine. It seems it happens when I was infected by a "Trojan Horse Generic 17.BWIK", "Trojan Horse SHeur.UHL" and "Fake_Antispyware.FAH". I have removed the threats using AVG anti-virus security. I got Firefox working, but Chrome and IE still cannot connect. I do not want to loose Chrome History so re-setting would be my last option and uninstall and install will be out of the question. Is there a way around this? I am using XP Pro on a desktop and DSL connection.

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >