Search Results

Search found 12826 results on 514 pages for 'third party controls'.

Page 385/514 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• Can't write to samba share

  - by Tiddo

  I try to setup a samba file server, but whatever I do I can't get write access to work (reading works fine). This is my current situation: I have a local fileserver with 3 harddisks mounted at /mnt/share/disk<nr>. 2 of these use the ext4 filesystem, the third one is ntfs. This file server runs Fedora 18 32-bit. The root folders of these harddisks are owned by superman:superman, and testparm outputs the following: [global] workgroup = WORKGROUP netbios name = FILE_SERVER server string = Samba Server Version %v interfaces = lo, eth0, 192.168.123.191/8 log file = /var/log/samba/log.%m max log size = 50 unix extensions = No load printers = No idmap config * : backend = tdb hosts allow = 192.168.123. cups options = raw wide links = Yes [share] comment = Home Directories path = /home/share/ write list = superman, @users force user = superman read only = No create mask = 0777 directory mask = 0777 inherit permissions = Yes guest ok = Yes I've tried a lot to get this to work: the disk are chmodded to 777, I've tried turning off selinux, I've added the samba_share_t label to the disks and as can be seen in the above output I tried to make the smb config as permissive as I could, but still I cannot write to the share (tried from Windows 7 and another Fedora installation). What can I try to be able to write to the shares? EDIT: The replies I got so far are mostly concerned with the smb.conf. I have however tried a lot of different setup, ready made configs, and solutions to similar problems for the smb.conf file, so I suspect that the real problem is somewhere else.

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• mac gets stuck in a blue screen during boot

  - by user10826

  Hi, a macbook pro 2008 unibody, after restart gets stuck in a blue screen. I used the Leopard disk and I verified and repaired permissions, which seem to be a problem, because the assistant found some wrong files. After restart I got the same problem. After googling I reset PRAM and the other (I do not remember the name now). Same problem. I check that I can boot in safe mode, although it is a lot slower. So before anything I try to make a time machine backup, hoping that I can be done from safe mode. First question: If it works, is it possible to do a clean leopard install (I do not like Snow) and migrate all user accounts from the backup, although it was done in safe mode? Second question: I read about the feature "archive and install" from the leopard disc. Is it reliable? Because I am afraid of losing all data ... Third question: I think this boot stuck has to do with the load of some program or service. It would explain why the computer does boot on safe mode and not in the normal one. I would then like to check what the computer loads during boot, but in more detail that with the information provided from /system preferecens/account/start, because there I removed everything. Where can I find more advanced information? And, if I remove programs from the safe mode, will it be effective druing the normal boot? Thanks

  Read the article

• How do I make wallpaper fit both monitors in dual monitor setup?

  - by Ben

  I am deploying some custom corporate wallpaper as part of a Windows 7 rollout. Some people will be using dual monitors, and the additional monitors may be either 4:3 or widescreen. I want to use the same wallpaper on both screens (i.e. 2 copies of the same wallpaper, not stretched across both.) If I set the background to "stretch", it uses the aspect ratio of the primary monitor to stretch the wallpaper on both monitors. So, for example, if I have a dual monitor setup using a 4:3 TFT as primary and my (widescreen) laptop LCD as secondary - the image shows on the laptop LCD in 4:3, with a black stripe down either side. I've only noticed this as an issue with my "custom" wallpaper. Both the default MS wallpaper and the built in Lenovo wallpaper don't seem to have this issue. Is this by using "trickery" such as using an image larger than the largest resolution you will have and centering it? (i.e. so you crop out part of the image.) Or can this be done "properly"? I don't want to use 3rd party software to do this, but would happily do a bit of Powershell scripting if this would solve the issue. Thanks in advance, Ben

  Read the article

• Better logging for cronjob output using /usr/bin/logger

  - by Stefan Lasiewski

  I am looking for a better way to log cronjobs. Most cronjobs tend to spam email or the console, get ignored, or create yet another logfile. In this case, I have a Nagios NSCA script which sends data to a central Nagios sever. This send_nsca script also prints a single status line to STDOUT, indicating success or failure. 0 * * * * root /usr/local/nagios/sbin/nsca_check_disk This emails the following message to root@localhost, which is then forwarded to my team of sysadmins. Spam. forwarded nsca_check_disk: 1 data packet(s) sent to host successfully. I'm looking for a log method which: Doesn't spam the messages to email or the console Don't create yet another krufty logfile which requires cleanup months or years later. Capture the log information somewhere, so it can be viewed later if desired. Works on most unixes Fits into an existing log infrastructure. Uses common syslog conventions like 'facility' Some of these are third party scripts, and don't always do logging internally. UPDATE 2010-04-30 In the process of writing this question, I think I have answered myself. So I'll answer myself "Jeopardy-style". Is there any problem with this method? The following will send any Cron output to /usr/bin//logger, which will send to syslog, with a 'tag' of 'nsca_check_disk'. Syslog handles it from there. My systems (CentOS and FreeBSD) already handle log rotation. */5 * * * * root /usr/local/nagios/sbin/nsca_check_disk 2>&1 |/usr/bin/logger -t nsca_check_disk /var/log/messages now has one additional message which says this: Apr 29, 17:40:00 192.168.6.19 nsca_check_disk: 1 data packet(s) sent to host successfully. I like /usr/bin/logger , because it works well with an existing syslog configuration and infrastructure, and is included with most Unix distros. Most *nix distributions already do logrotation, and do it well.

  Read the article

• What is the best way to connect 3 switches with a router?

  - by Carlos Morales

  Hello everyone, I'm trying to rebuild the network from my work and I was thinking what is the best way to connect three switches and a router. The router has 4 ports so I thought to connect 2 switches to the router (each switch connected with 2 cables to the router) and then connect the third switch to one of the others with two cables. So is like this, two cables from switch one to the router, two cables from switch two to the router and two cables from switch 3 to switch 1 or 2. So my questions are: Is it better to connect the router to each switch with a cable or the more cables you have the better? If I connect the switch 3 to switch 1 or 2 is it better to connect it with a cable or you get better performance with more cables. If I'm wrong and there is a better or more efficient way to connect them please let me know. The router is a Netgear RP114 (I'll upgrade it to a Sonicwall NSA 240), switch 1 is a Netgear GS748T, switch 2 is a Cisco Catalyst 2924-XL and switch 3 is a D-link DGS-1024D Thank you very much

  Read the article

• VPN Setup: Mac OS X and SonicWall

  - by noloader

  I'm trying to get VPN access up and running. The company has a SonicWall firewall/concentrator and I'm working on a Mac. I'm not sure of the SonicWall's hardware or software level. My MacBook Pro is OS X 10.8, x64, fully patched. The Mac Networking applet claims the remote server is not responding. The connection attempt subsequently fails: This is utter bullshit, as a Wireshark trace shows the Protected Mode negotiation, and then the fallback to Quick Mode: I have two questions (1) does Mac OS X VPN work in real life? (2) Are there any trustworthy (non-Apple) tools to test and diagnose the connection problem (Wireshark is a cannon and I have to interpret the results)? And a third question (off topic): what is broken in Cupertino such that so much broken software gets past their QA department? EDIT (12/14/2012): The network guy sent me "VPN Configuration Guide" (Equinox document SonicOS_Standard-6-EN). It seems an IPSec VPN now requires a Firewall Unique Identifier. Just to be sure, I revisited RFC 2409, where Main Mode, Aggressive Mode, and Quick Mode are discussed. I cannot find a reference to Firewall Unique Identifier. I think I am screwed here: I am trying to connect to a broken (non-standard) firewall, with a broken Mac OS X client. Fortunately, I can purchase VPN Tracker Personal (a {SonicWall|Equinox}-authored client) for $129US from Equinox. So much for standards....

  Read the article

• How to use AND/OR Building Block content in a Word 2007 template

  - by JimmyJames

  I am creating a Schedule of Work template and am successfully using Developer Tab and Quick Parts to allow user to choose content on an "either/or" basis: either A; OR B; OR C; etc., essentially choose one option from many. One Building Block control, one paragraph, nice and clean. Now what I need to do but cannot seem to figure out, is how to allow user to choose content on an "and/or" basis: either A AND B; A OR B AND C; B AND D AND E OR F; etc., essentially choose several options from many on a variable basis. One Building Block control, maybe one paragraph, maybe three or more paragraphs. Not so clean. I thought of building choice options for all possible paragraph combinations, but I can have as many as 7 or 8 different paragraphs, and that solution quickly becomes unworkable. Multiple controls--some of which will be left unused doesn't work either, since I cannot find an easy way to have a "Choose or Delete" control that actually deletes if "Delete" is chosen. Recommendations are most welcome.

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• SMTP message rate control on Ubuntu 8.04, preferably with postfix

  - by TimDaMan

  Maybe I am chasing a bug but I am trying to set up a smtp proxy of sorts. I have a postfix server which receives all the email for a collection of servers/clients. It them uses a smarthost (relayhost=...) to forward it's mail to our corporate MTA. I would like to limit the number of messages an individual server can relay to prevent swamping the corporate MTA. Postfix has a program called "anvil" that is capable of tracking stats about mail to be used for such things but it doesn't seem to be executed. I ran "inotifywait -m /usr/lib/postfix/anvil" while I started postfix and sent a number of messages through it from a remote server. inotifywait indicated anvil was never run. Anyone gotten postfix/anvil rate controls to work? main.cf smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myhostname = site-server-q9 alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = Out outgoing mail relay mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 10.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = 10.X.X.X smtpd_client_message_rate_limit = 1 anvil_rate_time_unit = 1h master.cf extract anvil unix - - - - 1 anvil smtp inet n - - - - smtpd

  Read the article

• No power save on external hard drive - How to implement?

  - by blastawaythewall

  I recently bought a new 3.5" USB external hard drive which I thought had a power save feature on it, but it turns out that it doesn't. So whether it's being used or not, it spins, which wouldn't be a problem if it wasn't so loud and didn't get really really hot. After doing some research, it seems like what controls this is the enclosure of the hard drive and not the drive itself or the OS (although I suspect that's not entirely true). I attempted to use the "hdparm" utility but it couldn't identify my externals. Just to be clear, I'm defining power save as a hard drive spinning down after a certain time period of not being used (read from/written to). Also, I have other externals that do this, so it's not a problem from my computer. Here's my question: Is there a way to implement a power save-like feature on my hard drive through software, OS settings, or anything else? Here's some details: Running: Windows XP Home SP2 HD Model: Cavalry CAUM-B-OTB 2TB (although the website only lists 1TB max) Inside: Hitachi Deskstar 7K2000 (HDS722020ALA330) (I would link, but new users can only post 1) Thanks in advance.

  Read the article

• Solaris 10: How to image a machine?

  - by nonot1

  I've got a Solaris 10 workstation that I'd like to create a full image backup from. The machine has 2 drives, one UFS for system root, and 1 ZFS for data storage. I intend to add a third HD to keep the backup images of both primary drives (including any zfs snapshots). The purpose is not disaster recovery, but rather to allow me to easily blow away a series of application installation/configuration changes I intend to try. What's the best way to do this? I'm not too familiar with Solaris, but have some basic Linux knowledge. I looked at CloneZilla, but it does not support Solaris. I'm OK with just a dd | gzip > image style solution, but I'd need some way to first zero-out the non-used blocks on the primary drives to aid gzip. They are are much larger than my 3rd drive, but hardly have any real data. Update to clarify: I specifically want to avoid using any file-system snapshot functionality, because part of the app configuration changes involve/depend slightly on existing and new snapshots. Ideally the full collection of snapshots should be part of the backup. Virtualization not an option, because the goal is to do performance evaluation on a very specific HW configuration. For the same reason, the spurious "back up" snapshots could skew performance data. Thank you

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

• raid 0 data recovery?

  - by Fred

  HI All, I have two identical seagate 7200.9 500Gb drives confiured as a RAID 0 spanned disk in windows. One of the drives has lost power and wont spin up at all. I know this normally means death for the data on both drives but i have a cunning plan.. DISK 1 - NO POWER RAID 0 DISK DISK 2 - FULLY FUNCTIONAL RAID 0 DISK DISK 3 - FULLY FUNCTIONAL SPARE DISK Copy the working drive (disk 2) data to a third 500GB DISK (disk 3), remove the logic board from the working disk (disk 2) and replace it with the non working logic board on the broken drive (disk 1) , then hopefully recreate the RAID 0 with disk 1 and disk 3, just long enough to get the data off it. Hope this makes sense, here are my questions: Windows disk manager atm recognises disk 2 but wont let me access it in anyway, therefore copying the data off it (or getting a disk image) cant be done in windows. Does anyone know of any software (in linux or self booting) that would allow me to access this disk? Anyone know of any software that will recreate the spanned drive off two disk images Am i missing any key information that means i definitely shouldn't even bother starting this, i know its a long shot anyway but its worth a try unless i definitely cant do it. The irritating thing is that i am sure its a logic board failure on disk 1 as it simply wont power up at all, suddenly no signs of life, so i am sure the data is intact! Any help would be really appreciated! Thanks

  Read the article

• centos 6.3 kvm external ip forwarding to guests

  - by user1111702

  I have a centos 6.3 server with kvm installed. The server has 4 external ips and one NIC. 176.9.xxx.xx1 176.9.xxx.xx2 176.9.xxx.xx3 176.9.xxx.xx4 I use the following configuration ifcfg-eth0 as slave to ifcfg-br0 the configuration in ifcfg-eth0 is DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=14:da:e9:b3:8b:99 and in the ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=176.9.xxx.xxx IPADDR=176.9.xxx.xx1 NETMASK=255.255.255.0 SCOPE="peer 176.9.xxx.xxx" and I have 3 more aliases for br0 , br0:1 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx2 NETMASK=255.255.255.248 ONBOOT=yes br0:2 to get the trafic from the third external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx3 NETMASK=255.255.255.248 ONBOOT=yes br0:3 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx4 NETMASK=255.255.255.248 ONBOOT=yes The above settings work fine and I recieve the trafic from all the external ips. My problem is that I want to pass the trafic from external ip to specific virtual guest on my server. ie trafic that comes from 176.9.xxx.xxx2 must pass to virtual machine 1 176.9.xxx.xxx3 must pass to virtual machine 2 176.9.xxx.xxx4 must pass to virtual machine 3 Can you please help me how to achieve this ? What are the settings on the host and what should I do to the guests. Thank you in advance

  Read the article

• PHP cannot connect to MySQL

  - by yogal

  Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

  Read the article

• KVM and libvirt: How to configure a new disc device to an existing VM?

  - by initall

  I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

• BIND zones and named files

  - by preethika

  I've installed BIND in my Windows server2003. i've configured the named file in C:\named\etc\named.conf as: options { directory "c:\named\zones"; allow-transfer { none; }; recursion no; }; zone "tisdns.com" IN { type master; file "db.tisdns.com.txt"; allow-transfer { none; }; }; My zone file is configured in C:\named\zones\db.tisdns.com.txt as: $TTL 6h @ IN SOA ns1.tisdns.com. hostmaster.tisdns.co… ( 2010010901 10800 3600 604800 86400 ) @ NS ns1.tisdns.com. ns1 IN A 192.168.0.17 mug IN A 192.168.0.103 key "rndc-key" { algorithm hmac-md5; secret "M0oW24WFQZhMu9wTq8qepw=="; }; controls { inet 127.0.0.1 port 53 allow { 127.0.0.1; } keys { "rndc-key"; }; }; In the above i've given the name to the domain as "tisdns". i want to create a new domain name in a different zone file. how can i create it?

  Read the article

• Netgear FVS336G: appropriate solution for today's small businesses?

  - by bwerks

  Hey all, I've been looking into a routers to facilitate a vpn solution for a small business. While the Netgear FVS336G looks good on paper, it appears to have some fairly crippling setbacks that drag down what appears to be some great hardware. First off, the unit has been around for a couple years now, perhaps before 64-bit operating systems were as common as they are now, and complaints are everywhere that claim that SSL or IPsec (or both) VPN connections will not work with 64-bit operating systems. However, most of these claims mention only Vista, which makes me think that these problems could have potentially been solved since then. Unfortunately though, Netgear's support forums seem to be incredibly private, and policed by some troll named jmizuguchi who just closes down public posts in order to marshal them into the private ones. Danger, will robinson. Apparently their firmware upgrade process is a nightmare too, but that's beside the point. My question is this: has anyone configured one a Netgear FVS336G to operate in a server 2008 (or R2)/windows 7 64-bit network? If so, is it possible to use the microsoft vpn client or are third party clients still required? If this thing has just failed the test of time, is there a feature-comparable unit that I've missed, at anywhere near the same price range? Thanks!

  Read the article

• Screen Flicker on a black MacBook

  - by sixtyfootersdude

  I have a MacBook Black. For about the last six months I have had a strange screen flicker when I: start my machine and plug in the power cord of my machine This morning when I woke up my computer the screen backlight did not turn on at all. When I held the computer in direct sunlight I could see the screen and I could tell that everything was working normally (other than the backlight). Pressing the screen brightness controls (F2) brought up the brightness panel. The brightness panel informed me that the screen was at maximum brightness. I did a bit of Searching and this is what I found: This post describes how to buy and replace a macbook screen. Do you think that this would solve my problem? Additional info: I am running 10.6.4 I recently upgraded from 10.4. I experienced similar issues in 10.4. I am pretty sure that this is a hardware issue. The problem does not occur when the screen is at a specific angle. It usually only happens at startup/wakeup or when the power is plugged/unplugged.

  Read the article

• Calling Excel from PHP 5 through COM fails on Windows 7 when Apache started through Task Planner

  - by Stefan Pantke

  I currently write an application, which controls Excel through COM: The app creates a COM-based Excel instance, opens some XLS files and reads their contents. Scenario I On Windows 7, I start Apache and mySQL using xmapp-control with system administrator rights. All works as expected. The PHP-based controller script interacts with Excel as expected. Scenario II A problem appears, if I start Apache and mySQL as 'background jobs'. Here is how: I created two jobs using Windows 7 Task Planner. One runs apache_start.bat, the other runs mysql_start.bat. Both tasks run as SYSTEM with elevated privileges when Windows 7 boots. Apache and mySQL work as expected. Specifically, Apache serves HTTP request from clients and PHP is able to talk to mySQL. When I call the PHP controller, which calls and interacts with Excel using COM, I do receive an error. The error seems to come from Excel [not COM itself] and reads like this: Excel can't read the XLS-file Excel failed to save the file due to an ill-name worksheet Interestingly, during the first run of the PHP-based controller script, it takes a few seconds to render the error message. Each subsequent run immediately renders the error message. Windows system logs didn't show a single problem report entry. Note, that the PHP program and the Apache instance didn't change - except the way Apache was started. At least the PHP controller script is perfectly able to read the file-system, since it provides the pathes to the XLS-file through scandir() of a certain directory. Concurrency issues can't be the cause of the problem. A single instance of the specific PHP controller interacts with Excel. Question Could someone provide details, why this happens?

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. Update: I left the desktop off for a few days and it started. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Update: I always keep the desktop running and I never shut it down. During updates or manual restarts, it powers up without issues. I wonder if this sheds lights on the issue. Any idea how I can narrow down the issue? ex: if I can find if the PSU is dying etc. I'd really like to fix the issue. Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp3 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Permanently deleting files on Mac OS

  - by Jonik

  A while back, as relatively new Mac OS X user, I was surprised to learn that you cannot easily delete files. Directly, that is, without moving them to the trash first. On Windows and Linux this can obviously be done with ease, but not so on the Mac. I noticed this when trying clear up files from a USB memory stick — removing the files ("move to trash") does not free up space; that happens only after emptying the whole system-wide Trash. Not particularly convenient! (It seems stupid to have to empty the whole trashcan just to make some space on the USB stick. There might be gigabytes of stuff in there, and this sort of defeats its purpose - what if you'd actually need to restore something from the trash some day.) So, what's your way of getting around this? Have you bought a 3rd party application like RAW Trash for $16.95 just to delete files, or do you diligently empty the trashcan whenever needed? Or did I miss something? Also, can you convince me that this is actually the way it should be — that users shouldn't be able to fiddle with the filesystem easily? :)

  Read the article

• Connecting a laptop to a TV via HDMI

  - by Madmartigan

  I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >