Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 387/1418 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

• Trouble Extending Network with Apple Airport Extreme (PC won't connect with Ethernet)

  - by 0x783czar

  So I have an Apple Airport Extreme base station that I use to create a wifi network at my house. But on a separate story from this station i have a PC (running Windows 7) that does not have a wireless card. Luckily, I have another Airport Extreme Base Station, so I figured I'd have my second station "extend" the existing network. I asked Apple if this was possible, which it was, and walked through the setup wizard to extend the network. Then I ran an ethernet cable from the Station to my PC. However the PC refuses to connect to the Internet. It says it can access the network, "Unidentified Network (Limited Connectivity)", but that's it. It tells me that my computer does not have an IP address. I tried running the cable to another computer (my Apple MacBook Pro) and got a similar error. Any thoughts?

  Read the article

• Run Windows XP on a usb drive virtually on Windows XP?

  - by Russell

  I am sick of not being able to run and install certain applications on my work computer due to admin restrictions (eg: Adobe AIR) . I have heard of smaller versions of Windows running on a usb thumb drive and have looked into it but can't find anything on running windows virtually from a usb drive. I would like to be able to login to this particular computer, insert my usb drive and then open up another version of windows installed on the thumb drive while still being able to use the windows I logged in on (literally be able to alt+tab between the main desktop and the virtual desktop from the usb drive). Is this even possible? For further clarification: The version of windows has to be Windows XP and there is no other option available for what I want to do. Looking forward to a response.

  Read the article

• 2D Spaceship movement math

  - by YAS

  Hi, I'm new here. I'm trying to make a top-down spaceship game and I want the movement to somewhat realistic. 360 degrees with inertia, gravity, etc. My problem is I can make the ship move 360 with inertia with no problem, but what I need to do is impose a limit for how fast the engines can go while not limiting other forces pushing/pulling the ship. So, if the engines speed is a maximum of 500 and the ship is going 1000 from a gravity well, the ship is not going to go 1500 when it's engines are on, but if is pointing away from the angle is going then it could slow down. For what it's worth, I'm using Construct (www.scirra.com), and all I need is the math of it. Thanks for any help, I'm going bald from trying to figure this out.

  Read the article

• ArcObjects - Will the Post/Reconcile Operations Fire the IObjectClassEvents Event?

  - by grefly

  Just wondering if anyone had experience with this before I go down that rabbit hole...

  Read the article

• Are there any programs to aid in the mass-editing of Visual SourceSafe checkin comments?

  - by Schnapple

  I know that in Visual SourceSafe you can go in and drill down to the history of an individual file and then drill down to an individual check-in and apply a comment to the check-in that way but that's tedious and time consuming - if you have a lot of files that were checked in at the same time and you want the same comment to apply to all of them this will take forever. I use the tool VSSReporter to generate reports of checkins and other stuff from VSS, but it cannot edit anything, only report on them. Are there any tools which will let you go back and retroactively apply comments to check-ins in an efficient and easy manner?

  Read the article

• Logging which is the best way

  - by Tony

  Hi People who talk about loggers here never talke about EventLog, I think this is good for windows system. Is it reliable, or I found it dead in some bad morning? Why not logging everything at SQLServer, I am creating E-Commerce website, if SQL server down the website will be down anyway. but I am worry about temporally connection failure, what do u think? Why everyone like files, it can be in great size, too big to handle, or maybe I will create another file when a file is too big, and I can create a file with a date. Some one tried MS Enterprise library? talk to me about it. Thanks

  Read the article

• How to limit choice field options based on another choice field in django admin

  - by umnik700

  I have the following models: class Category(models.Model): name = models.CharField(max_length=40) class Item(models.Model): name = models.CharField(max_length=40) category = models.ForeignKey(Category) class Demo(models.Model): name = models.CharField(max_length=40) category = models.ForeignKey(Category) item = models.ForeignKey(Item) In the admin interface when creating a new Demo, after user picks category from the dropdown, I would like to limit the number of choices in the "items" drop-down. If user selects another category then the item choices should update accordingly. I would like to limit item choices right on the client, before it even hits the form validation on the server. This is for usability, because the list of items could be 1000+ being able to narrow it down by category would help to make it more manageable. Is there a "django-way" of doing it or is custom JavaScript the only option here?

  Read the article

• How beneficial is this subject combination for an undergrad CS student?

  - by Maxood

  I'm an undergrad Computer Science student and studying online. There is a lot of self study, independent research and practice i have to do myself. I wonder how beneficial would it be to choose this subject combination in programming: Data Structures OOP Assembly Language & Computer Architecture Although i also have the option to take DLD (Digital Logic Design) or Data communication courses instead of Assembly Language. My interest lies in programming and i'm also working as a programmer at local software house. Can anyone give me some good advice and suggestions.

  Read the article

• Combobox drops up in IE 8 and it works correctly in IE 6

  - by ravi2082

  Hi, I have a simple select/combo box with 100 options in the middle of a HTML page. When I open it in IE 6 it appears fine dropping down with a few elements displayed and a vertical scroll bar. In IE 8, it opens upward. Looks like it drops down till it reaches edge of browser screen when it has few options and then opens upward for new options added with a vertical scroll bar. Is there a way the select box can be adjusted to appear in IE 8 similar to IE 6? Thanks Ravi

  Read the article

• Safe deployment of ASP.Net applications

  - by gatapia

  Hi All, I have an asp.net app that I want to deploy safely (with as little down time possible). I would love to do something like blue green deployment but without the need for a second web server. So, I know I can use load balancing, etc but I need a quick and cheap approach. I was thinking of doing something like: Setting up another website (copy of original) in IIS, currently I use host headers to direct traffic across sites). I could then view the new site locally until the site is totally online (due to NHibernate start up and various other high intensity tasks this takes a while). Once site 2 is totally started I would then change host headers around giving me a much much smaller down time. So my question is. Has anyone done anything like this? Will IIS restart my app pool or application when changing host headers (making this useless)? Any other options? Thanks for your help all. Guido

  Read the article

• Slicing the EDG

  - by Antony Reynolds

  Different SOA Domain Configurations In this blog entry I would like to introduce three different configurations for a SOA environment.  I have omitted load balancers and OTD/OHS as they introduce a whole new round of discussion.  For each possible deployment architecture I have identified some of the advantages. Super Domain This is a single EDG style domain for everything needed for SOA/OSB.   It extends the standard EDG slightly but otherwise assumes a single “super” domain. This is basically the SOA EDG.  I have broken out JMS servers and Coherence servers to improve scalability and reduce dependencies. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if rest of domain is unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Single Administration Point (1 Admin Server) Closely follows EDG with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Drawbacks Patching is an all or nothing affair. Startup time for SOA may be slow if large number of composites deployed. Multiple Domains This extends the EDG into multiple domains, allowing separate management and update of these domains.  I see this type of configuration quite often with customers, although some don't have OWSM, others don't have separate Coherence etc. SOA & BAM are kept in the same domain as little benefit is obtained by separating them. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Startup time for SOA may be slow if large number of composites deployed. Shared Service Environment This model extends the previous multiple domain arrangement to provide a true shared service environment.This extends the previous model by allowing multiple additional SOA domains and/or other domains to take advantage of the shared services.  Only one non-shared domain is shown, but there could be multiple, allowing groups of applications to share patching independent of other application groups. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Shared SOA Domain hosts Human Workflow Tasks BAM Common "utility" composites Single OSB domain provides "Enterprise Service Bus" All domains use same OWSM policy store (MDS-WSM) Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Supports large numbers of deployed composites in multiple domains. Single URL for Human Workflow end users. Single URL for BAM end users. Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Human Workflow needs to be specially configured to point to shared services domain. Summary The alternatives in this blog allow for patching to have different impacts, depending on the model chosen.  Each organization must decide the tradeoffs for itself.  One extreme is to go for the shared services model and have one domain per SOA application.  This requires a lot of administration of the multiple domains.  The other extreme is to have a single super domain.  This makes the entire enterprise susceptible to an outage at the same time due to patching or other domain level changes.  Hopefully this blog will help your organization choose the right model for you.

  Read the article

• Using UIImageView for a flipbook anim on iphone

  - by Joey

  I'm using UIImageView to run a flipbook anim like this: mIntroAnimFrame = [[UIImageView alloc] initWithFrame:CGRectMake( 0, 0, 480, 320); mIntroAnimFrame.image = [UIImage imageNamed:@"frame0000.tif"]; Basically, when determine it is time, I flip the image by just calling: mIntroAnimFrame.image = [UIImage imageNamed:@"frame0000.tif"]; again with the right frame. Should I be doing this differently? Are repeated calls to set the image this way possibly bogging down main memory, or does each call essentially free the previous UIImage because nothing else references it? I suspect the latter is true. Also, is there an easy way to preload the images? The anim seems to slow down at times. Should I simply load all the images into a dummy UIImage array so they are preloaded, then refer to it when I want to show it with mIntroAnimFrame.image = mPreloadedArray[i]; ?

  Read the article

• Test whether image loaded correctly with JavaScript

  - by johkar

  I have an image deployed on several application servers (green up arrow: uparrow.gif). I have an application server status page where I list out all the servers and with a corresponding image where the image's source is the uparrow.gif for that server. If the image does not load (server down) I would like to switch to a red down arrow (downarrow.gif). Is there a way to check whether an image loaded or not with straight JavaScript (no JS libraries etc)? I would imagine I would set an interval for it to continue checking if the user were on the page. Thanks.

  Read the article

• MDX Filter a dimention with another dimension

  - by John Hartsock

  To all excuse my ignorance, but im new to MDX below is the query im trying to run SELECT NON EMPTY { [Measures].[Task Burn Down] } ON COLUMNS, NON EMPTY { ([Calendar].[Date].[Date].ALLMEMBERS * [Priority].[Priority Code].[Priority Code].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( { Filter([Calendar].[Date].AllMembers, [Calendar].[Date].CurrentMember <= [Sprint].[Sprint].CurrentMember.Properties("Stop Date")) } ) ON COLUMNS FROM ( SELECT ( { [Sprint].[Sprint].AllMembers } ) ON COLUMNS FROM ( SELECT ( { [Team].[Team].AllMembers } ) ON COLUMNS FROM [Backlog2] ) ) ) WHERE ( [Team].[Team].&[27], [Sprint].[Sprint].&[9] ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS When I run this I expect to get 1 value for [Measures].[Task Burn Down] for each day of the month. But I only want one month. My Sprint dimension has a stop date and I do not want to return any values after the stop date. What am I doing wrong?

  Read the article

• cannot access a site from Mac OSX Lion but can from other machines on network?

  - by house9

  SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

  Read the article

• Cross platform unicode path handling

  - by Matt Joiner

  I'm using boost::filesystem for cross-platform path manipulation, but this breaks down when calls need to be made down into interfaces I don't control that won't accept UTF-8. For example when using the Windows API, I need to convert to UTF-16, and then call the wide-string version of whatever function I was about to call, and then convert any output back to UTF-8. While the wpath, and other w* forms of many of the boost::filesystem functions help keep sanity, are there any suggestions for how best to handle this conversion to wide-string forms where needed, while maintaining consistency in my own code?

  Read the article

• how to remove a few lines from a Unicode registry file using batch commands in Windows?

  - by Cosmin

  Hi. I have a program who's generating some data in registry. I save it with "reg export HKCU\Software\ProgramName\Data data.reg" (Unicode format). I need to take it to other computer and import it there so the program from that computer could use the data. But I have to remove some text lines from data.reg. The text lines are easy to find because they contain some strings. Now I'm doing this manually (using Wordpad) every few days but maybe there is another way... Oh and I can't install other programs on these computers (the access is restricted) so I have to use batch/cmd files. What I tried so far: - redirecting the export to "con" but is visual only not in a variable; - using "for /F ..." but this works only with ANSI and removes blank lines. Can somebody please help me...? Thank you.

  Read the article

• Databinding to type double - decimal mark lost

  - by user1277327

  I have a project where I'm databinding a gridview to a list, where one column is databound to a gridview. The problem I have is that with the double being 5.5 on one computer it appears as 5.5 in the gridview. But on another it looks like 55, the decimal mark dissapears. So 3.14 will look like 314 etc. The error occurs with the following code: myDatagrid.ItemsSource = someList; Binding binding = new Binding("DoubleValue"); myColumnInDatagrid.Binding = binding; I've also tried using a very simple valueconverter, that just return the double, and parsed it in ConvertBack. I'm pretty new to WPF so I'm sorry if I've made some obvious mistakes, I just don't understand why it works on one computer but not on the other. Perhaps it should be noted that both of the computers use the same operating system, with the same language settings (afaik at least).

  Read the article

• How to get the current eventNumber for creating an event with NSEvent

  - by Chris

  Hello I'm creating an os x application for which I try to add a remote interface. For this I need to be able to send mouse down and mouse up commands to the window of my application. I found code with which I can successfully do this, it looks as follows: int mask = 0x100; NSEvent* eventMouseDown = [NSEvent mouseEventWithType:NSLeftMouseDown location:p modifierFlags:mask timestamp:[NSDate timeIntervalSinceSystemStartup] windowNumber:[w windowNumber] context:[NSGraphicsContext graphicsContextWithWindow:w] eventNumber:++eventCounter +42599 clickCount:1 pressure:0]; NSLog(@"Mouse down event: %@", eventMouseDown); [[NSApplication sharedApplication] sendEvent:eventMouseDown]; I have only one problem with this code thought and this is the eventNumer parameter. As far as I found out it is a number which get increased with each event. But I cannot find a way to find the current number from where on I need to increase. The number I use there currently is just try and error and also does not seam to work always.

  Read the article

• .NET Assembly Diff / Compare Tool - What's available?

  - by STW

  I'd like to be able to do a code-level diff between two assemblies; the Diff plug-in for Reflector is the closest thing I've found so far, but to compare the entire assembly is a manual process requiring me to drill-down into every namespace/class/method. The other tools I've found so far appear to be limited to API-level (namespaces, classes, methods) differences--which won't cut it for what I'm looking for. Does anyone know of such a tool? My requirements (from highest to lowest) are: Be able to analyze / reflect the code content of two versions of the same assembly and report the differences Accept a folder or group of assemblies as input; quickly compare them (similar to WinMerge's folder diff's) Quick ability to determine if two assemblies are equivalent at the code level (not just the API's) Allow easy drill-down to view the differences Exporting of reports regarding the differences (Personally I like WinMerge for text diffs, so an application with a similar interface would be great)

  Read the article

• Optimal method to create a large string containing several variables?

  - by Runcible

  I want to create a string that contains many variables: std::string name1 = "Frank"; std::string name2 = "Joe"; std::string name3 = "Nancy"; std::string name4 = "Sherlock"; std::string sentence; sentence = name1 + " and " + name2 + " sat down with " + name3; sentence += " to play cards, while " + name4 + " played the violin."; This should produce a sentence that reads Frank and Joe sat down with Nancy to play cards, while Sherlock played the violin. My question is: What is the optimal way to accomplish this? I am concerned that constantly using the + operator is ineffecient. Is there a better way?

  Read the article

• Finding underlying cause of Window 7 Account corruption.

  - by Carl Jokl

  I have been having trouble with my Sister's computer which I built. It is running Windows 7 Ultimate x64. The problem is that I have had problems with the accounts becoming corrupted. First problems manifest themselves in the form of Windows saying the profile failed to be loaded properly and a temporary profile. Eventually the account will not allow login at all. An error message along the lines the authentication service failing the login. I have found information about this problem and how to fix it. The problem being that something has corrupted the account profile and backing up and recreating the accounts fixes the problem. I have been able to fix things and get logins working again but over the period of usually about a week it happens again. Bit by bit the accounts corrupt and then it is back to square one. I am frustrated because I don't know what the underlying cause of the problem is i.e. what is causing the accounts to be corrupted in the first place. At the moment I am just treating the symptoms. I was hoping someone who may have more experience with dealing with this problem might be able to help me find the root cause. Some articles suggest that Norton Internet Security is a big culprit of this problem which is installed. I could try uninstalling Norton and see if it helps. The one thing which is different about this computer to any other I have built is that it has a solid state drive. Actually it has both a hard drive and solid state drive. The documents and settings i.e. the Users directory is stored on the hard drive. This was done following an article about moving the user account data onto a separate drive on Windows 7 which I found on the Internet. Moving the User accounts is more of a pain under Windows 7 and this solution involved creating a low level file system link to the folder from the boot drive (Solid State) to the Hard Drive. The idea is that the computer behaves just as if it is accessing the User's folder from the boot drive but actually the data is stored on the hard drive. This may have nothing to do with the cause of the problem but due to the problem being user account corruption it is a possibility I have not been able to rule out. Any help would be appreciated as I would be glad to see the back of this problem.

  Read the article

• .Net installation issue with SqlServerPipelineHost and SqlServer.DtsMsg

  - by Melody Friedenthal

  I added a web service consumer to a vb 2005 Windows app and tried to install it on another computer, which had an earlier version already installed (ClickOnce deployment). An error came up saying I needed to install Microsoft.SqlServer.PipelineHist in the GAC. I added PipelineHost to the list of references and marked it Copy Local = true, rebuilt the solution, published it and tried to install it on that other computer. This time it said I needed to install Microsoft.SqlServer.DtsMsg, however, that component does not show up on my list of .Net components. Where do I go from here? Thank you.

  Read the article

• Suspended Laptop Cannot Wake Up - Ubuntu

  - by Zack

  I've got an ASUS G73JH, and whenever I suspend it or hibernate it, it will not wake up. The screen stays backlight but is black. The fan remains running, however the HDD does not, not disk activity is noticeable (audibly (It's not a SSD)). I can't: Awaken it with the keyboard Awaken it with the mouse Soft power-off by pressing the power button Change virtual screens by pressing Ctrl-Alt-# Restart X by pressing Ctrl-Alt-Backspace I have to hold down the power button and shut it down that way, and this seems a little unreasonable. Is there a place I could look for more detail as to what's causing this? Is there a known quick-fix to this issue? Nothing is logged as happening when the system is in "suspend" mode. Here's what happened immediately before and after the suspend "happened," note the time gap: May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1) May 4 17:48:57 tofu kernel: imklog 4.2.0, log source = /proc/kmsg started. This one's kinda long, here's what happened immediately before the suspend, I'm not sure if it'll help but if you can find a use for it: May 4 17:46:10 tofu anacron[3353]: Anacron 2.3 started on 2010-05-04 May 4 17:46:10 tofu anacron[3353]: Normal exit (0 jobs run) May 4 17:46:10 tofu kernel: [ 2241.775927] CPU0 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775958] CPU1 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775987] CPU2 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776138] CPU3 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776168] CPU4 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776197] CPU5 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776200] CPU6 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776229] CPU7 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.919611] CPU0 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919668] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919699] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919733] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919762] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.919850] CPU1 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919852] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919881] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919912] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919915] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920003] CPU2 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920005] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920033] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920065] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920093] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920155] CPU3 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920157] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920185] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920217] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920245] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920307] CPU4 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920335] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920337] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920368] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920397] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920459] CPU5 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920487] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920489] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920520] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920611] CPU6 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920639] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920641] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920699] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920701] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920762] CPU7 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920791] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920793] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920851] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920853] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:12 tofu NetworkManager: <info> Sleeping... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): now unmanaged May 4 17:46:12 tofu NetworkManager: <info> (wlan0): device state change: 8 -> 1 (reason 37) May 4 17:46:12 tofu NetworkManager: <info> (wlan0): deactivating device (reason: 37). May 4 17:46:12 tofu NetworkManager: <info> (wlan0): canceled DHCP transaction, dhcp client pid 1984 May 4 17:46:12 tofu kernel: [ 2244.084515] wlan0: deauthenticating from 68:7f:74:23:02:ae by local choice (reason=3) May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.2 on wlan0. May 4 17:46:12 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.2. May 4 17:46:12 tofu avahi-daemon[1176]: Interface wlan0.IPv4 no longer relevant for mDNS. May 4 17:46:12 tofu NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. May 4 17:46:12 tofu NetworkManager: <info> (wlan0): cleaning up... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): taking down device. May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:1e4b:d6ff:fe78:951d on wlan0. May 4 17:46:12 tofu wpa_supplicant[1212]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys May 4 17:46:13 tofu NetworkManager: <info> (eth0): now unmanaged May 4 17:46:13 tofu NetworkManager: <info> (eth0): device state change: 8 -> 1 (reason 37) May 4 17:46:13 tofu NetworkManager: <info> (eth0): deactivating device (reason: 37). May 4 17:46:13 tofu NetworkManager: <info> (eth0): canceled DHCP transaction, dhcp client pid 1559 May 4 17:46:13 tofu NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012 May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.3 on eth0. May 4 17:46:13 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3. May 4 17:46:13 tofu avahi-daemon[1176]: Interface eth0.IPv4 no longer relevant for mDNS. May 4 17:46:13 tofu NetworkManager: <info> (eth0): cleaning up... May 4 17:46:13 tofu NetworkManager: <info> (eth0): taking down device. May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:4a5b:39ff:fe0b:325d on eth0. May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1)

  Read the article

• Server is on or off

  - by Daniel

  Curious. I'm starting to broadcast high school football games online, and it uses a program to broadcast the feeds off my computer. However, when I shut the program down or the computer down, the server goes offline and guests won't be able to access the feeds. Is there any kind of code out there that I can post onto my website that will indicate to my guests whether the server is on or off? I would figure it would be a simple code, a php script or something that periodically checks to see if a site is on line and then displays ON or OFF.

  Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >