Search Results

Search found 13262 results on 531 pages for 'complete validation'.

Page 388/531 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

  • Hostname error on my Slicehost Ubuntu server

    - by allesklar
    Like many folks who upgraded to Rails 2.2, I got an exception raised when sending an email. This version of Rails or later does require using tls for sending emails. The message in the production log file says: hostname was not match with the server certificate I did a whole lot of research and work on this and did everything I could. I changed my slice's hostname to ohlalaweb.com. If I run the command 'hostname' at the CL I get: ohlalaweb.com Postfix seems to work fine. I can send emails from the CL to my gmail, yahoo, and google apps gmail accounts with no problems. Here is the result of cat /etc/postfix/main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smmtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ohlalaweb.pem smtpd_tls_key_file=/etc/ssl/certs/ohlalaweb.pem smtpd_use_tls=yes # SA created next line to force postfix to use self create certificate smtpd_tls_auth_only=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = ohlalaweb.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = localhost.localdomain, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all I have regenerated the ssl keys with the ohlalaweb.com host name. Any ideas or suggestions?

    Read the article

  • Issues with sustained traffic with PFSense

    - by Farseeker
    Last week we had to replace our PFSense firewall because it had a catastrophic hardware failure. All but one of the NICs were taken out of the old server and put into the new one. The one NIC that was not moved was the LAN NIC as this is on-board. The other NICs are all WAN connections and the must all be present (i.e. I can't disable one just for the sake of testing) After re-installing PFSense and restoring our backup of the configuration, everything came back online just fine, however on the new hardware any download that takes longer than about 10 seconds just times out in the middle. Example 1: Downloading from Microsoft.com goes at about 900k/sec and times out after about 10 seconds (thus, just under 10Mb of content) Example 2: Downloading from cnet.com goes at about 300k/sec and times out after about 10 seconds (thus, about 3Mb of content). By times out, I mean that the download just stops, and you have to pause/resume to get the next part done, repeat and rinse until the download is complete. However it's not consistant, sometimes it's 10 seconds, sometimes it's 4 seconds, and it sometimes you can't even load a heavy HTML page because the page never finishes. I assume this is most likely because PFSense does not like the onboard NIC, as this is the primary difference between the two servers. It's recognised as NFE0, and there's no room in the server for any more NICs and I don't have any dual-port NICs handy to experiment with a different LAN connection. I've never had to troubleshoot this sort of issue before. Can anyone give me some pointers about where to start? Linux is not my forte so please be kind!

    Read the article

  • Acer Aspire One -- strange battery problem, charges only up to ~90%

    - by houbysoft
    I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

    Read the article

  • What would keep a Microsoft Word AutoNew() macro from running?

    - by Chris Nelson
    I'm using Microsoft Office 2003 and creating a bunch of template documents to standardize some tasks. I know it's standard practice to put the templates in an certain place Office expects to find them but that won't work for me. What I want is to have "My Template Foo.dot" and "My Template Bar.dot", etc. in the "My Foo Bar Stuff" on a shared drive and users will double click on the template to create a new Foo or Bar. What's I'd really like is for the user to double click on the Foo template and be prompted for a couple of items related to their task (e.g., a project number) and have a script in the template change the name that Save will default to something like "Foo for Project 1234.doc". I asked on Google Groups and got an answer that worked....for a while. Then my AutoNew macro stopped kicking in when I created a new document by double clicking on the template. I have no idea why or how to debug it. I'm a software engineering with 25+ years of experience but a complete Office automation noob. Specific solutions and pointers to "this is how to automate Word" FAQs are welcome. Thanks.

    Read the article

  • Add Route for machine in same DC

    - by gary
    My routing table on my machine with IP of 46.84.121.243 currently looks like this - Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 46.84.121.225 46.84.121.243 21 46.84.121.224 255.255.255.224 On-link 46.84.121.243 276 46.84.121.239 255.255.255.255 On-link 46.84.121.243 21 46.84.121.243 255.255.255.255 On-link 46.84.121.243 276 46.84.121.255 255.255.255.255 On-link 46.84.121.243 276 I'm trying to access 46.84.121.239, which is my other machine in the same DC but my guess is the first rule is blocking it as it is trying to go via the gateway and failing - Tracing route to [46.84.121.239] over a maximum of 30 hops: 1 OWNEROR-9O83HBL [46.84.121.243] reports: Destination host unreachable. Trace complete. I'm doing all this via RDP and already tried changing the metric on the persistent rule with devastating consequences! Here's the persistent rule (working) - Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 46.84.121.225 1 Any help to be able to access the 46.84.121.243 would be very helpful thanks very much.

    Read the article

  • The physical working paradigm of a signal passing on wire.

    - by smwikipedia
    Hi, This may be more a question of physics, so pardon me if there's any inconvenience. When I study computer networks, I often read something like this in order to represent a signal, we place some voltage on one end of the wire and the other end will detect the voltage and thus the signal. So I am wondering how a signal exactly passes through wire? Here's my current understanding based on my formal knowledge about electronics: First we need a close circuit to constrain/hold the electronic field. When we place a voltage at somewhere A of the circuit, electronic field will start to build up within the circuit medium, this process should be as fast as light speed. And as the electronic field is being built up, the electrons within the circuit medium are moved, and thus electronic current occurs, and once the electronic current is strong enough to be detected at somewhere else B on the complete circuit, then B knows about what has happend at A and thus communication between A and B is achieved. The above is only talking about the process of sending a single voltage through wire. If there's a bitstream and we need to send a series of voltages, I am not sure which of the following is true: The 2nd voltage should only be sent from A after the 1st voltage has been detected at B, the time interval is time needed to stimulate the electronic field in the medium and form a detectable electronic current at B. Several different voltages could be sent on wire one by one, different electronic current values will exists along the wire simutaneously and arrive at B successively. I hope I made myself clear and someone else has ever pondered this question. (I tag this question with network cause I don't know if there's a better option.) Thanks, Sam

    Read the article

  • ESXi 4.0 - cannot copy files

    - by user21368
    I am unable to copy files or make directories on my installation of VMWare ESXi 4.0. I have done so in the past (copied an iso onto a datastore). But something has changed and I have no idea what. I cannot copy using the datastore browser (get a dialog saying "Expected a PUT_FILE_DONE message. Got SESSION_COMPLETE"). I cannot create a directory through datastore browser (get a dialog saying "Cannot complete file creation operation"). When I ssh to the ESXi server I cannot create files or folders under /vmfs/volumes. But I can manipulate files elswhere (including /vmfs). Here are the permissions for the directories (I am logged in as root). ~ # ls -lh /vmfs/volumes/ drwxr-xr-t 1 root root 1.2k Sep 3 12:19 4a76f260-36b7eb85-c3b3-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 4a76f261-d6190a9e-3b89-0024e8314929 drwxr-xr-t 1 root root 1.4k Sep 22 10:38 4a76f262-4ac21f0a-6bc1-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor1 - c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor2 - bbf1477b-4aec1d8c-caa5-5e8720bebd85 l--------- 0 root root 1.9k Jan 1 1970 Hypervisor3 - efd8efe3-03bc1cbf-15e0-080efd9e7379 drwxr-xr-x 1 root root 8 Jan 1 1970 bbf1477b-4aec1d8c-caa5-5e8720bebd85 drwxr-xr-x 1 root root 8 Jan 1 1970 c42ce27f-eb8d7f70-7f70-0e7a85e8edc4 l--------- 0 root root 1.9k Jan 1 1970 datastore1 - 4a76f260-36b7eb85-c3b3-0024e8314929 l--------- 0 root root 1.9k Jan 1 1970 datastore2 - 4a76f262-4ac21f0a-6bc1-0024e8314929 drwxr-xr-x 1 root root 8 Jan 1 1970 efd8efe3-03bc1cbf-15e0-080efd9e7379 ~ # touch /vmfs/foo.txt ~ # touch /vmfs/volumes/foo.txt touch: /vmfs/volumes/foo.txt: Operation not permitted I've googled and found nothing helpful. Does anyone out there have an idea as to what is going on? Thanks in Advance. Pete.

    Read the article

  • Does Windows XP automatically reassemble UDP fragments?

    - by Matt Davis
    I've got a Windows application that receives and processes XML messages transmitted via UDP. The application collects the data using Windows "raw" sockets, so the entire layer 3 packet is visible. We've recently run across a problem that has me stumped. If the XML messages (i.e., UDP packets) are large (i.e., 1500 bytes), they get fragmented as expected. Ordinarily, this will cause the XML processor to fail because it attempts to process each UDP packet as if it is a complete XML message. This is a known short-coming in the system at this stage of its development. On Windows 7, this is exactly what happens. The fragments are received and logged, but no processing occurs. On Windows XP, however, the same fragments are seen, and the XML processor seems to handle everything just fine. Does Windows XP automatically reassemble UDP fragments? I guess I could expect this for a normal UDP socket, but it's not expected behavior for a "raw" socket, IMO. Further, if this is the case on Windows XP, why isn't the behavior the same on Windows 7? Is there a way to enable this?

    Read the article

  • Chmod 644 on /etc/ any way to fix?

    - by DazSlayer
    I tried to tab complete something and I guess it wasnt there. I know you are not supposed to set the permissions to /etc/ like that, but my permissions seem to be all messed up. whoami prints out cannot find name for user ID 1002 and I cannot cd into /etc/ anymore. passwd and shadow use 640 and 644 so I am not sure why this is a problem. Regardless, is there any way to fix this? The command run was sudo chmod 644 /etc/ I have no name!@vpn-server:/$ whoami whoami: cannot find name for user ID 1002 I have no name!@vpn-server:/$ cd etc bash: cd: etc: Permission denied I have no name!@vpn-server:/$ ls -al etc d????????? ? ? ? ? ? . d????????? ? ? ? ? ? .. d????????? ? ? ? ? ? acpi -????????? ? ? ? ? ? adduser.conf I have no name!@vpn-server:/$ sudo su sudo: can't open /etc/sudoers: Permission denied

    Read the article

  • Async ignored on AJAX requests on Nginx server

    - by eComEvo
    Despite sending an async request to the server over AJAX, the server will not respond until the previous unrelated request has finished. The following code is only broken in this way on Nginx, but runs perfectly on Apache. This call will start a background process and it waits for it to complete so it can display the final result. $.ajax({ type: 'GET', async: true, url: $(this).data('route'), data: $('input[name=data]').val(), dataType: 'json', success: function (data) { /* do stuff */} error: function (data) { /* handle errors */} }); The below is called after the above, which on Apache requires 100ms to execute and repeats itself, showing progress for data being written in the background: checkStatusInterval = setInterval(function () { $.ajax({ type: 'GET', async: false, cache: false, url: '/process-status?process=' + currentElement.attr('id'), dataType: 'json', success: function (data) { /* update progress bar and status message */ } }); }, 1000); Unfortunately, when this script is run from nginx, the above progress request never even finishes a single request until the first AJAX request that sent the data is done. If I change the async to TRUE in the above, it executes one every interval, but none of them complete until that very first AJAX request finishes. Here is the main nginx conf file: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 64; # configure temporary paths # nginx is started with param -p, setting nginx path to serverpack installdir fastcgi_temp_path temp/fastcgi; uwsgi_temp_path temp/uwsgi; scgi_temp_path temp/scgi; client_body_temp_path temp/client-body 1 2; proxy_temp_path temp/proxy; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; # Sendfile copies data between one FD and other from within the kernel. # More efficient than read() + write(), since the requires transferring data to and from the user space. sendfile on; # Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet, # instead of using partial frames. This is useful for prepending headers before calling sendfile, # or for throughput optimization. tcp_nopush on; # don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time. tcp_nodelay on; types_hash_max_size 2048; # Timeout for keep-alive connections. Server will close connections after this time. keepalive_timeout 90; # Number of requests a client can make over the keep-alive connection. This is set high for testing. keepalive_requests 100000; # allow the server to close the connection after a client stops responding. Frees up socket-associated memory. reset_timedout_connection on; # send the client a "request timed out" if the body is not loaded by this time. Default 60. client_header_timeout 20; client_body_timeout 60; # If the client stops reading data, free up the stale client connection after this much time. Default 60. send_timeout 60; # Size Limits client_body_buffer_size 64k; client_header_buffer_size 4k; client_max_body_size 8M; # FastCGI fastcgi_connect_timeout 60; fastcgi_send_timeout 120; fastcgi_read_timeout 300; # default: 60 secs; when step debugging with XDEBUG, you need to increase this value fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; # Caches information about open FDs, freqently accessed files. open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # Turn on gzip output compression to save bandwidth. # http://wiki.nginx.org/HttpGzipModule gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_http_version 1.1; gzip_vary on; gzip_proxied any; #gzip_proxied expired no-cache no-store private auth; gzip_comp_level 6; gzip_buffers 16 8k; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript application/javascript; # show all files and folders autoindex on; server { # access from localhost only listen 127.0.0.1:80; server_name localhost; root www; # the following default "catch-all" configuration, allows access to the server from outside. # please ensure your firewall allows access to tcp/port 80. check your "skype" config. # listen 80; # server_name _; log_not_found off; charset utf-8; access_log logs/access.log main; # handle files in the root path /www location / { index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 # location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # add expire headers location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt|js|css)$ { expires 30d; } # deny access to .htaccess files (if Apache's document root concurs with nginx's one) # deny access to git & svn repositories location ~ /(\.ht|\.git|\.svn) { deny all; } } # include config files of "enabled" domains include domains-enabled/*.conf; } Here is the enabled domain conf file: access_log off; access_log C:/server/www/test.dev/logs/access.log; error_log C:/server/www/test.dev/logs/error.log; # HTTP Server server { listen 127.0.0.1:80; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; } # HTTPS server server { listen 443 ssl; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; include domains-common/ssl.conf; } Contents of ssl.conf: # OpenSSL for HTTPS connections. ssl on; ssl_certificate C:/server/bin/openssl/certs/cert.pem; ssl_certificate_key C:/server/bin/openssl/certs/cert.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri =404; fastcgi_param HTTPS on; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } Contents of location.conf: # Remove trailing slash to please Laravel routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } location / { try_files $uri $uri/ /index.php?$query_string; } # We don't need .ht files with nginx. location ~ /(\.ht|\.git|\.svn) { deny all; } # Added cache headers for images. location ~* \.(png|jpg|jpeg|gif)$ { expires 30d; log_not_found off; } # Only 3 hours on CSS/JS to allow me to roll out fixes during early weeks. location ~* \.(js|css)$ { expires 3h; log_not_found off; } # Add expire headers. location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt)$ { expires 30d; } # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri /index.php =404; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_pass 127.0.0.1:9100; } Any ideas where this is going wrong?

    Read the article

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

    Read the article

  • Dynamically updating DNS records with NSUPDATE fails

    - by Thuy
    I've got my own nameserver ns3.epnddns.com and domain epnddns.com I wanted to try and update the records dynamiclly from home using nsupdate but when I run nsupdate -k Kwww.epnddns.com.+157+17183.key i get the following errors Kwww.epnddns.com.+157+17183.key:1: unknown option 'www.epnddns.com.' Kwww.epnddns.com.+157+17183.key:2: unexpected token near end of the file Kwww.epnddns.com.+157+17183.{private,key}: unexpected token Not sure why I get these errors, I'll post my complete setup. Generated keys on my home pc, using dnssec-keygen -a HMAC-MD5 -b 128 -n HOST www.epnddns.com. created /var/named/ and put the keys there and chmod them to 600. transfered the keys to my nameserver ns3.epnddns.com, created /var/named/ ,put the keys there and chmod them to 600 made dnskey.conf in /var/named and added key www.epnddns.com. { algorithm hmac-md5; secret "my secret from they keys=="; }; chmod to 600 then in /etc/bind/named.conf.local include "/var/named/dnskeys.conf"; zone "epnddns.com" { type master; file "/etc/bind/zones/epnddns.com.zone"; allow-transfer { myhomeip; }; //its my home ip so not in the same network allow-update { key www.epnddns.com.; }; }; I restarted bind without any error messages so it seems to be working on the nameserver at least. But on my homepc when i try and run the nsupdate i get those error messages. Thanks in advance for any help or insightful advice.

    Read the article

  • How do you verify a restore?

    - by Nic
    What tool(s) would you use to verify that a restored file structure is whole and complete? My environment is a Windows Server 2008 file server. (We use tape for backup, but that is inconsequential.) I am specifically looking for a tool that will: Record the names of all files and folders below a specified directory Optionally calculate checksums of each file encountered Save this index in a human-readable format Compare the index against restored data and show differences Some background: I recently had to replace the disks in our file server. The upgrade was scheduled to start 36 hours after the most recent full backup, so I created a differential backup. However, it turns out that one of our applications was clearing the archive bit on files saved to the server, so these were not included in the differential backup. I was unaware of this until my users reported some files as missing. Aside from this, are there any other common methods for validating the integrity of a restore? I am frequently told that testing backups by restoring them is the only way to know that backups are working, but how do you deal with the case where it works 99% correctly and the other 1% silently fails?

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Why are snapshots considered as temporary backups not real backups?

    - by Samselvaprabu
    I am using VMware ESXi. In our team we use to provide snapshots for long term backup. Then we faced issues like memory spillover and the server got hang up. I started reading in VMware knowledgebase articles and everywhere. Everywhere it was recommended not to have snapshots for a long time. Even VMware advised to keep snapshots for maximum of three days. But our team kept asking us to have at least two permanent snapshots (till deleting the VM). Sometimes we may use the VM for a year). one snapshot is for fresh machine state. (So when we complete testing an application, we will revert back to fresh state and install another application) (If I did not allow that, I may often need to host the VM.) Next snapshot for keeping the VM in some state (maybe they would have found an issue and keep that state for some time. Or they may install prerequisites for the application and keep the machine ready for testing.) Logically, their needs seems to be fair. But if I allow that, I am to permit them to hold the snapshots for long time. We are not using our VM as a mail server or database server. Why is keeping snapshots for long time having an adverse effect? Why are snapshots considered as temporary backups, not real backups?

    Read the article

  • Using 1920x1200 mode on SyncMaster T260HD in Linux

    - by dagorym
    I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

    Read the article

  • Configuring WPA WiFi in Ubuntu 10.10

    - by sma
    I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

    Read the article

  • Fetch videos from sony handycam to linux

    - by bstpierre
    I've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device. If I run usb-devices, I see: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=00c1 Rev=01.00 S: Manufacturer=SONY S: Product=Storage Device C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage The driver says usb-storage, but I'm not sure how to get the device mounted. Is there a way to make this work? Update: checking dmesg, I see: [259072.576559] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [259072.687200] usb 2-1.1: configuration #1 chosen from 1 choice [259072.836188] Initializing USB Mass Storage driver... [259072.836476] scsi5 : SCSI emulation for USB Mass Storage devices [259072.836632] usb-storage: device found at 6 [259072.836636] usb-storage: waiting for device to settle before scanning [259072.836660] usbcore: registered new interface driver usb-storage [259072.836666] USB Mass Storage support registered. [259077.830410] usb-storage: device scan complete [259077.832343] scsi 5:0:0:0: CD-ROM SONY DDX-A1010 R1.0 PQ: 0 ANSI: 0 [259077.888167] sr1: scsi3-mmc drive: 0x/0x pop-up [259077.888446] sr 5:0:0:0: Attached scsi CD-ROM sr1 [259077.888593] sr 5:0:0:0: Attached scsi generic sg2 type 5 [259080.002079] sr 5:0:0:0: [sr1] Unhandled sense code [259080.002085] sr 5:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [259080.002091] sr 5:0:0:0: [sr1] Sense Key : Blank Check [current] [259080.002097] sr 5:0:0:0: [sr1] Add. Sense: No additional sense information [259080.002104] sr 5:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 00 00 [259080.002117] end_request: I/O error, dev sr1, sector 0 [259080.002123] Buffer I/O error on device sr1, logical block 0 [259080.002128] Buffer I/O error on device sr1, logical block 1 Those I/O errors don't look good, is there any hope?

    Read the article

  • can't figure out why apache LDAP auth fails

    - by SethG
    Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

    Read the article

  • setting up a proxy to mirror an SSH SOCKS connection

    - by aresnick
    I have two remote machines, remote1 and remote2. remote2 is only running sshd, and I can't run anything else on it. remote1 is a full-fledged server to which I have complete access. I can run a SOCKS proxy on remote2 via ssh -f -N -D *:8080 me@remote2 which lets me expose a SOCKS proxy on port 8080 on remote1. I'd like to authenticate this so that the proxy isn't sitting open. How can I do this? It seems like I should be able to use delegate, but I can't even seem to get its HTTP proxy functionality working. When I run delegated -r -P8081 SERVER=http PERMIT="*:*:*" REMITTABLE="*" I can't even get it to work on port 8081. Anyway, I was hoping someone could point me in the right direction to let me authenticate access to the SOCKS proxy connection? That is, I want to be able to point my browser's proxy at remote1 and browse the internet through the SSH SOCKS proxy/tunnel to remote2. squid doesn't support a SOCKS parent =( Thanks!

    Read the article

  • GlusterFS on VMWare ESXi 5

    - by Dharmavir
    I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

    Read the article

  • How does the LeftHand SAN perform in a Production environment?

    - by Keith Sirmons
    Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here.

    Read the article

  • Windows cant repair even with sfc /scannow

    - by GeekyDewd
    Clean install of windows 8, then installed the windows 8.1 update (after all other updates). CBS Log: CBS Log on Google Drive Important pieces of the log: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:38, Info CSI 00000505 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000506 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:40, Info CSI 00000507 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000508 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:35:43, Info CSI 00000509 [DIRSD OWNER WARNING] Directory [ml:520{260},l:138{69}]"\??\C:\WINDOWS\System32\WindowsPowerShell\v1.0\Modules\NetSecurity\en" is not owned but specifies SDDL in component Networking-MPSSVC-WMI.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral And: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:12, Info CSI 00000888 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 00000889 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:13, Info CSI 0000088a [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 0000088b [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:42:13, Info CSI 0000088c [SR] Repair complete

    Read the article

  • Updated XAMPP with MySQL, all my tables are missing

    - by user371699
    I just updated XAMPP to a newer version, which included updating MySQL from 5.5 to 5.6. Using phpMyAdmin, however, all of my tables within my databases still appear on the left navigation panel, but the main window shows that all my databases are empty (except for information_schema, and a couple other default tables.) Clicking on a table in the navigation panel gives me a "table doesn't exist" message. It does looks like information_schema.tables doesn't have my tables, either. Can anyone assist me with this? I did make a complete backup of all my databases before the upgrade, but I first want to see if I can fix this the "normal" way. Furthermore, I'm not sure if the MySQL upgrade involved making changes to the information/performance databases, so I don't know if I can restore the old ones. Thank you. EDIT: Continuing my searching, I realized that only the INNODB databases are missing. I've tried running the following with no avail: /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp and /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql The my.cnf file in /opt/lampp/etc contains the following InnoDB settings: innodb_data_home_dir = /opt/lampp/var/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /opt/lampp/var/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M # Deprecated in 5.6 #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 What could possibly be wrong? Why is the information_schema not updating correctly? It looks like /opt/lampp/var/mysql has all my tables in it within the database directories, but they're still not showing up in information_schema.

    Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >