Search Results

Search found 13262 results on 531 pages for 'complete validation'.

Page 392/531 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Any ideas? Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp2 KB896256 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Error during Time Machine backups on OS X Lion

  - by user92401

  After I turn on my machine, the first couple of Time Machine backups seem to go OK, but after about an hour I get this error: Unable to complete backup. An error occurred while creating the backup folder. Latest successful backup: 7/31/11 at 12:32 PM I'm running 10.7. Time Machine is backing up an internal HD to an external USB HD. I've already run Disk Utility to repair the Time Machine partition. It's a relatively new hard drive and didn't have any issues. Here's what I've found in the Console's log filtered for backupd: 7/31/11 12:31:21.223 PM com.apple.backupd: Starting standard backup 7/31/11 12:31:21.447 PM com.apple.backupd: Backing up to: /Volumes/MyMac TM Backup/Backups.backupdb 7/31/11 12:31:29.146 PM com.apple.backupd: 983.7 MB required (including padding), 391.90 GB available 7/31/11 12:32:19.471 PM com.apple.backupd: Copied 3156 files (36.0 MB) from volume Macintosh HD. 7/31/11 12:32:20.017 PM com.apple.backupd: Copied 3173 files (36.0 MB) from volume LI. 7/31/11 12:32:20.136 PM com.apple.backupd: 934.8 MB required (including padding), 391.86 GB available 7/31/11 12:32:54.755 PM com.apple.backupd: Copied 916 files (117.8 MB) from volume Macintosh HD. 7/31/11 12:32:54.894 PM com.apple.backupd: Copied 933 files (117.8 MB) from volume LI. 7/31/11 12:32:55.937 PM com.apple.backupd: Starting post-backup thinning 7/31/11 12:32:55.937 PM com.apple.backupd: No post-back up thinning needed: no expired backups exist 7/31/11 12:32:55.960 PM com.apple.backupd: Backup completed successfully. 7/31/11 1:21:28.624 PM com.apple.backupd: Starting standard backup 7/31/11 1:21:28.631 PM com.apple.backupd: Backing up to: /Volumes/MyMac TM Backup/Backups.backupdb 7/31/11 1:21:28.682 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/MyMac TM Backup/Backups.backupdb/Will’s Mac Pro size:37 7/31/11 1:21:28.683 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/MyMac TM Backup/Backups.backupdb/Will’s Mac Pro size:37 7/31/11 1:21:38.694 PM com.apple.backupd: Backup failed with error: 2

  Read the article

• nmap installation issue

  - by daasf

  vanilla centos with latest updates, installed gcc, and after ./configure:.... Configuration complete. Type make (or gmake on some *BSD machines) to compile. [root@winxp nmap-5.51]# make Makefile:375: makefile.dep: No such file or directory g++ -MM -I./liblua -I./libdnet-stripped/include -I./libpcre -I./libpcap -I./nbase - I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"http://nmap.org\" - DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" - D_FORTIFY_SOURCE=2 main.cc nmap.cc targets.cc tcpip.cc nmap_error.cc utils.cc idle_scan.cc osscan.cc osscan2.cc output.cc payload.cc scan_engine.cc timing.cc charpool.cc services.cc protocols.cc nmap_rpc.cc portlist.cc NmapOps.cc TargetGroup.cc Target.cc FingerPrintResults.cc service_scan.cc NmapOutputTable.cc MACLookup.cc nmap_tty.cc nmap_dns.cc traceroute.cc portreasons.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_binlib.cc nse_bit.cc > makefile.dep /bin/sh: g++: command not found make: *** [makefile.dep] Error 127 [root@winxp nmap-5.51]# yum install g++ -y Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.ash.fastserv.com * base: centos.mirror.choopa.net * extras: mirror.trouble-free.net * updates: mirror.nexcess.net Setting up Install Process No package g++ available. Nothing to do [root@winxp nmap-5.51]#

  Read the article

• Setup Firefox to save .pages as .zip automatically

  - by Mike Dtrick

  What do I want to do? I would like Firefox to save files with the .pages extension as .zip files automatically. Scenario You are browsing through your emails and you notice your friend just sent you an email with a file attached (a .pages in this example). Unfortunately, you have a laptop that runs Windows. Your friend continues to send tons of emails with .pages files attached and you are tired of manually saving the files as a .zip file. Ultimately, you would like Firefox to be set up so that the download/file manager recognizes the .pages extension and automatically converts it to a .zip file. What have I done? I have saved files manually by selecting save as "All Files" and setting the extension to .zip. I've gone through Firefox and their documentation and have not found anything on how to complete this task. Why am I doing this? To save time (only a few seconds, not the main reason). I would like to setup a simple solution that "converts" a file automatically without having to recall steps on how to achieve the task manually (for clients who aren't exactly tech savvy). So that clients with Windows can access the files. IMPORTANT NOTE: I am not trying to save the web page, rather an Apple document equivalent to Microsoft Word. UPDATE: The really easy method would be to save one file, right click it, choose properties and open all .pages files up with WinRAR (or any other program that extracts files from a compressed folder). For the sake of learning, I am going to "neglect" this method and continue to do some research on Firefox add-ons. I would still like to have Firefox or the download manager to do the bulk of the work for converting the file.

  Read the article

• replacing the default console emulator under Windows XP

  - by Gilles

  How can I replace the default program providing console windows under Windows XP? I know of alternative programs, and I have a shortcut to start cmd.exe in Console2. But now I want console applications to start in Console2 rather than the default console program, even when I have no control over the program that starts the console application. (I.e. a non-console program starts consoleapp.exe, and I can't change it to start Console2 instead, but I still want the application to be started inside a new instance of Console2.) (Note that I want to replace the console itself, that is, the window in which console (i.e. text mode) applications run. And I must be able to run arbitrary, unmodified console applications: a substitute for a specific console program such as Cmd won't do me any good.) EDIT: So what I'm after is a CSRSS replacement, which leads to OT: I want to know when Microsoft is going to make a decent CSRSS replacement. Not being able to adjust the width of a "terminal" by resizing the window is a complete joke. Go download the ISE already. (It's included in Win7/2008R2.) But as far as I understand this ISE is an environment for Powershell, not a general console emulator.

  Read the article

• Generating new SID for Windows 7 cloned partition in Linux?

  - by Jack

  So I've read that the proper way to clone a Windows 7 partition is to run a Sysprep after the clone is complete. For MANY reasons, this is not possible the way we are cloning these drives (long story short, the drive should be fully up and running after we clone it, with all the settings already there and requiring no user intervention; and no, not even an answer file would work because the way we customize all the Win7 settings is complex and we do not want the user touching the settings). I understand Microsoft will not support Windows 7 clones if it is not sysprepped and that is fine for us. Acronis recovery tools get around this by ticking an option called "Create new NT signature", which resets the SID and GUID on any restore. Symantec has a tool called Ghostwalker which does the same thing. However, we are looking for a way to do this in Linux because we want to use open source tools to do the imaging (fsarchiver, partclone, etc. basically the same tools Clonezilla uses internally to clone NTFS partitions). The question is, if we clone using these tools in Linux, how would we generate a new SID thereafter (without the use of sysprep)? Is there any way to do it within a Linux environment? The whole image process is automated so if it is a simple command that I can just throw in my shell script, that would be even better. Of course, it would be nice to know if this is even possible. Any ideas? EDIT: Forgot to mention that the target machines we are restoring the image on are EXACTLY the same.

  Read the article

• What is the best way/Software to manage multiple short lived instances of virtual machines ?

  - by Newtopian

  Hi, We have a QA department that have to test our software on multiple combination of OS and DMBS. With Windows spewing out many different versions the combinatorial math of all this can be daunting. So we decided on visualizing our setups but so far it only displaces the problem. The cost of hardware is expensive and we need many different combination far exceeding your server capacity to deliver. Also, these instances are throw away, once the test is complete we no longer need it, furthermore to ensure proper test isolation we should start fresh from a new instance. Lastly we only need a small subset of these system online at any given time. What I am looking for is a way to manage inventory so that our QA staff can order instances to be put online as required and discarded once used. Instances are spawned from a pool of freshly installed systems with the appropriate combination ready to accept our software. It also should be possible for two or more people to start the same instance at the same time, though we could manage without this if it proves too complex to put in place. Finally our budget is pretty thin, we can probably make some purchases but ideally expenditures should be kept to a minimum. To summarize we should be able to : Bring instances online on demand. Ideally should offer queue and scheduling management Destroy instances on demand Keep masters in inventory but not online. Manage large inventory of VMs (30-100 maybe more) with small staff of users (5-10). Allow adding, deleting and changing instances from inventory (bring online, make changes and check back in, or create new and check in). Allow few long lived instances for support tools (normal VM server usage) Thanks for your answers

  Read the article

• Completely remove and freshly install MySql on XP?

  - by Corey Ogburn

  I have read this question and have not found it as a solution and I have even attempted much more. I've uninstalled MySql 5.5.18 and deleted: C:\Program Files\MySql C:\Documents and Settings\All Users\Application Data\MySql After uninstalling, I restart the computer. When I reinstall, in the MySql Server Instance Configuration Wizard I leave everything to their defaults except: I add a firewall exception I check Launch MySQL Server Automatically I check Include BIN directory in windows path Enable root access from remote machines (I'll lock that down later, just debugging for now, I have also tried installing without this option to no avail) I've tried Typical and Complete while installing, as well as with and without strict mode. No combination shows a difference. After all this, it cannot Apply Security Settings and I get a 10061 error (it also said error number 2003) and this article didn't help. I've tried everything I can to completely uninstall and successfully reinstall so I can start from scratch. I've uninstalled and reinstalled about a dozen times with minor changes (including turning off the firewall at times), each time deleting the above folders and any proper registry entries with no success. Note by success, applying security settings and a working remote connection. I can connect locally every time, but it's remotely that counts. I have tried to look for exterior problems such as port forwarding in the router and (even though the installer should add it) I do double check the firewall settings, which have always allowed the default port. I'm out of ideas.

  Read the article

• MSSQL error: consistency-based I/O error - can it be caused by an MSSQL or OS problem?

  - by Philipp Keller

  This is what I saw in the windows error log: SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x19fedd20; actual: 0x19fed5e3). It occurred during a read of page (1:1764) in database ID 6 at offset 0x00000000dc8000 in file 'D:\mssql\local_repository_pbdiffimport.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. I ran dbcc checkdb which told me I should restore with option REPAIR_ALLOW_DATA_LOSS, so I eventually ran DBCC CHECKDB (my_db_name, REPAIR_ALLOW_DATA_LOSS) WITH NO_INFOMSGS But that resulted in about 2'000 rows being lost. I restored a backup but now I'm afraid this will happen again since we already had a consistency problem in the same database about 2 weeks ago but then it happened in an index (recreated indexes solved the problem). We have investigated the discs - RAID5 looks good, no errors, and also none of the disc-check-utilities have revealed any hardware problem. Can this be caused by OS (Windows Server 2003) or by MSSQL (MSSQL Server 2005)?

  Read the article

• Whats the best way to update Ubuntu 9.04?

  - by Fu86

  I have a Ubuntu 9.04 server which has no packase support anymore. If I want to update my package lists, I get th following errors: Err http://de.archive.ubuntu.com jaunty-security/multiverse Packages 404 Not Found [IP: 141.30.13.10 80] W: Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/jaunty/main/binary-amd64/Packages 404 Not Found [IP: 141.30.13.10 80] .... I read at the official Ubuntu-Support-Page, that there is a update-manager-core-Package to upgrade to a new release. Unfortunately I dont have this package installed and I am unable to install it because of the lack of package sources. EDIT: Installing the package update-manager-core from another release doesn't work because it depends on a higher version of python-apt. (Tried with 10.04) $ dpkg -i update-manager-core_0.134.7_amd64.deb Selecting previously deselected package update-manager-core. (Reading database ... 28743 files and directories currently installed.) Unpacking update-manager-core (from update-manager-core_0.134.7_amd64.deb) ... dpkg: dependency problems prevent configuration of update-manager-core: update-manager-core depends on python-apt (>= 0.7.13.4ubuntu3); however: Version of python-apt on system is 0.7.9~exp2ubuntu10. update-manager-core depends on python-gnupginterface; however: Package python-gnupginterface is not installed. dpkg: error processing update-manager-core (--install): dependency problems - leaving unconfigured Errors were encountered while processing: update-manager-core So, whats the best way to upgrade to to current Release without reinstalling the complete (virtual) server?

  Read the article

• How can I copy a VMware Fusion virtual machine to a FAT32 partition?

  - by Michael Prescott

  I created the virtual machine on a host running OS X. I then moved the machine to a FAT32 partition on an external drive. It moved the first time without error. Then I moved it from the external drive to a host running Ubuntu 9.10. I had to move to a FAT32 partition first because Ubuntu doesn't recognize Mac OS Extended partitions on the drive. So, the virtual machine (vm) ran on the ubuntu host for a while and then I moved it back to the FAT32 partition and from there back to the OS X host. I worked on the vm for a while on the OS X host and then attempted to move it back to the FAT32 partition. I get the following system error: The Finder can’t complete the operation because some data in “my-virtual-machine” can’t be read or written. (Error code -36) Interestingly, I can move the file to another OS X partition, just not FAT32. I also perused VMware's forums and found advice to set permissions on all files and folders to 777. I did this, but have had no success. I notice the the files within the vm package are 777 now, but there is an extended attributes symbol on their permission details "rwxrwxrwx@" Since I can copy the vm between OS X partitions, but not to non OS X partitions, and all files and folders withing the vm package and the package itself have permissions of 777, I speculate that the "@" is the problem. How can I remove the "@" or is there something else I need to modify to allow me to copy/move the vm to other hosts?

  Read the article

• Not able to run firefox in a head-less Ubuntu server 9.10

  - by Julio J.

  I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

  Read the article

• hp proliant dl360 disk diagnostic issue

  - by user1039384

  We recently got two used drives (15000) and installed on our HP proliant dl360 G5 server. Created RAID1 and used HP SmartStart CD to perform diagnostics. Interestingly, the Diagnostic tab immidiately fails on Logical drive testing saying the Disk1 should be replaced, while the Test tab successfully runs all the complete tests on both disks and does not find any issue. At the meantime, when booting to esxi 5, vSphere periodically shows the Disk1 as Unknown and Logical drive in recovery process. This happens every 5-10 minutes. Here is the log from HP SmartScan diagnostic: 1 - Device, Test: Logical Drive 1, Storage Controller in Slot 0 1 - Description: The controller has reported a critical error in the drive error log. 1 - Recommended Repair: This drive should be replaced. 1 - Failed Count: 44 1 - Error code: F157 There is also another error log record (see below): 2 - Device, Test: test_components/libstorage.so ID 2 - Description: An unexpected exception occurred while performing an operation. Exception message: CISS_StatusHandler::evaluate: commandStatus = 4 (INVALID); hexdump of CISS_ErrorInfo: 00000000: __ __ 04 __ 20 __ __ __ __ __ __ __ __ __ __ __ .... ... ........ 00000010: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ 00000020: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ Device: Hard Drive 2, Storage Controller in Slot 0 Property name: Bad Target Count 2 - Recommended Repair: Reboot or restart Insight Diagnostics. Retry the test. If the problem persists, upgrade to the latest version of Insight Diagnostics. 2 - Failed Count: 48 2 - Error Code: F62 Note that rebooting didn't help and I was running the latest diagnostic software version. Anyone has a clue? Is this a real disk issue? BTW, the controller is Smart Array E200i Thanks in advance

  Read the article

• Why is my mono/XSP site loading slow?

  - by acidzombie24

  I have two sites on the same server. One is loading perfectly and incredibly fast. The other is an equally complex site except a bit less javascript and 0 images. Its taking several seconds to load and there is a 1 in 3 chance that i get a Http500 error. WTF I grabbed the lastest 2.6.? version of mono, mod_mono and xsp (libgdiplus-2.6.7, xsp-2.6.5, mod_mono-2.6.3 and mono 2.6.7) This is whats in apache error.log [Mon Jan 03 19:33:40 2011] [error] (70014)End of file found: read_data failed [Mon Jan 03 19:33:40 2011] [error] Command stream corrupted, last command was 1 [Mon Jan 03 19:34:52 2011] [error] (70014)End of file found: read_data failed [Mon Jan 03 19:34:52 2011] [error] (70014)End of file found: read_data failed [Mon Jan 03 19:34:52 2011] [error] Command stream corrupted, last command was 1 [Mon Jan 03 19:34:52 2011] [error] Command stream corrupted, last command was 1 this is the page error Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny9 with Suhosin-Patch mod_mono/2.6.3 Server

  Read the article

• Connection problems via Wifi (multiple devices)

  - by Kelvin Farrell

  I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

  Read the article

• MAMP MySQL won't start

  - by Tony

  I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• Installing mysqlnd for php 5.4.9 on CentOs 6.3

  - by kira423

  Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

  Read the article

• Home network with two isolated separate subnets, running on cablemodem/router and WRT-router.

  - by Johan Allgoth

  I have a new connection with a nice new router/cable-modem. I'd like to setup it up optimally and needs some pointers. I am a complete n00b when it comes to routing. I want to end up with two separate subnets, 10.1.2.0/24 and 192.168.1.0/24 each available on their own wireless channel/SSID. Both firewalled. I want my wired computers on the gigabit switch, optimally with public ips. I want to be able to reach 192.168.1.0/24 from 10.1.2.0/24, but not vice versa. Everyone should have internet access. Hardware and capabilities: Netgear CG3100. Handles cable connection. Gigabit switch. 802.11n. Can do DHCP, firewall, NAT etc. Can choose subnet. Can turn of NAT and if so hand out up to 4 public ips. Somewhat challenged when it comes to configuration. WRT-router. Runs DD/Open-WRT very stable. 100 Mbit switch. 802.11.g Can do DHCP, firewall, NAT etc. Can choose subnet. Highly configurable. I hope to be able to keep 10.1.2.0/24 on the CG3100, for speed reasons and 192.168.0.0/24 on the WRT-router for quota and user control reasons. On my 10.1.2.0/24 network I plan on running servers for various services. Should I turn of NAT on the WRT-router? Or on the cable modem? Activate what in that case? Is double NAT always f-ed up?

  Read the article

• Pip installs on Archlinux fails to build egg

  - by stmfunk

  I was trying to install nltk on my Archlinux server but it repeatedly fails with the following error output /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'entry_points' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'zip_safe' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'test_suite' warnings.warn(msg) usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] or: setup.py --help [cmd1 cmd2 ...] or: setup.py --help-commands or: setup.py cmd --help error: invalid command 'bdist_egg' /tmp/pip_build_root/nltk/distribute-0.6.21-py3.3.egg Traceback (most recent call last): File "./distribute_setup.py", line 143, in use_setuptools raise ImportError ImportError During handling of the above exception, another exception occurred: Traceback (most recent call last): File "", line 16, in File "/tmp/pip_build_root/nltk/setup.py", line 23, in distribute_setup.use_setuptools() File "./distribute_setup.py", line 145, in use_setuptools return _do_download(version, download_base, to_dir, download_delay) File "./distribute_setup.py", line 125, in _do_download _build_egg(egg, tarball, to_dir) File "./distribute_setup.py", line 116, in _build_egg raise IOError('Could not build the egg.') OSError: Could not build the egg. ---------------------------------------- Cleaning up... Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/nltk Storing complete log in /root/.pip/pip.log This error is also occurring for matplotlib buts thats the only other library I found it to fail on so far. pyyaml installs fine. The install works perfectly under virtualenv on my mac which is using python 2.7 but the server is using python 3.3. Any help is appreciated.

  Read the article

• The SSL certificate doesn't established

  - by Andrey Eagle

  situation following: Windows Server 2008 R2 platform. Certificate installation in the IIS Manager occurs successfully with *.cer file but if I refresh the manager (F5), the certificate vanishes from the list. And, respectively in the Bindings window, at https addition, the certificate is absent in the menu. Thus if to open certificates via the MMS console, it can be seen in the Personal store. Whether there is any possibility to make so that the web server could "see" this certificate or how to make so that it didn't disappear from the list? Prompt how to solve this problem, thanks in advance! P.S. The certificate is acquired in tawte. In total that to me provided, these are account data where it is possible simply with save-pastit the certificate in 2 options: PKCS#7 and X.509. Here is the manual I used. P.S.2 If Complete Certificate Request with *.p7b I get an error: Cannot find the certificate request that is associated with this certificate file. Acertificate request must be comleted on the computer where the request was created.

  Read the article

• Private IP getting routed over Internet

  - by WernerCD

  We are setting up an internal program, on an internal server that uses the private 172.30.x.x subnet... when we ping the address 172.30.138.2, it routes across the internet: C:\>tracert 172.30.138.2 Tracing route to 172.30.138.2 over a maximum of 30 hops 1 6 ms 1 ms 1 ms xxxx.xxxxxxxxxxxxxxx.org [192.168.28.1] 2 * * * Request timed out. 3 12 ms 13 ms 9 ms xxxxxxxxxxx.xxxxxx.xx.xxx.xxxxxxx.net [68.85.xx.xx] 4 15 ms 11 ms 55 ms te-7-3-ar01.salisbury.md.bad.comcast.net [68.87.xx.xx] 5 13 ms 14 ms 18 ms xe-11-0-3-0-ar04.capitolhghts.md.bad.comcast.net [68.85.xx.xx] 6 19 ms 18 ms 14 ms te-1-0-0-4-cr01.denver.co.ibone.comcast.net [68.86.xx.xx] 7 28 ms 30 ms 30 ms pos-4-12-0-0-cr01.atlanta.ga.ibone.comcast.net [68.86.xx.xx] 8 30 ms 43 ms 30 ms 68.86.xx.xx 9 30 ms 29 ms 31 ms 172.30.138.2 Trace complete. This has a number of us confused. If we had a VPN setup, it wouldn't show up as being routed across the internet. If it hit an internet server, Private IP's (such as 192.168) shouldn't get routed. What would let a private IP address get routed across servers? would the fact that it's all comcast mean that they have their routers setup wrong?

  Read the article

• reset locale in debian under Squeeze

  - by si2w

  I have problems with locale in debian. I tried many thing but it doesn't anything for me : locale -a locale: Cannot set LC_CTYPE to default locale: No such file or directory C POSIX en_US.utf8 I try to set en_US.utf8 without success with this :dpkg-reconfigure locales -plow perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory /usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory /usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory Generating locales (this might take a while)... en_US.UTF-8... done Generation complete. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). After reboot, i try to use a perl script : perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Here is my /etc/default/locale config file : cat /etc/default/locale LANG=en_US.UTF-8 LANGUAGE=en_US Any idea to solve this (stupid) problem ? Thanks

  Read the article

• Load Balancing Rails on Apache 2.x

  - by revgum

  My situation is that I need to proxy traffic to the root of my web server to port 81 for IIS, and then any traffic to a sub-directory needs to be directed to the rails app. my-server.com/ - needs to proxy to port 81 my-server.com/myapp - needs to point to the rails app This seems to be working alright for the rails application but the images, javascripts, and stylesheets are not actually working (proxied). I've tried to fiddle with the proxypass lines but it still doesn't work for me..can anyone help? Here's my complete VirtualHost portion of the config; LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_http_module modules/mod_proxy_http.so ProxyRequests off <Proxy balancer://myapp_cluster> BalancerMember http://127.0.0.1:3001 BalancerMember http://127.0.0.1:3002 </Proxy> <VirtualHost *:80> DocumentRoot "c:\ruby\apps\myapp\public" <Directory /myapp > Options FollowSymLinks AllowOverride None </Directory> ProxyPass /myapp/images ! ProxyPass /myapp/stylesheets ! ProxyPass /myapp/javascripts ! ProxyPass /myapp/ balancer://myapp_cluster/ ProxyPassReverse /myapp/ balancer://myapp_cluster/ ProxyPreserveHost on ProxyPass / http://localhost:81/ ErrorLog "c:\ruby\apps\myapp\log\error.log" # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog "c:\ruby\apps\myapp\log\access.log" combined </VirtualHost>

  Read the article

• Simple Linux program that takes any HTTP/HTTPS request and returns a single page?

  - by ultrasawblade

  I have a Linux box operating as router. There's a NIC that's connected to the internet (WAN), a NIC connected to an 8-port GbE switch (LAN), and a NIC connected to a Linksys wireless N-router (WLAN). Routing between everything is working perfectly. I have security completely disabled on the wireless router, but the WLAN NIC is firewalled such that it will only accept DNS queries and PPTP VPN connections. Currently HTTP/HTTPS traffic and everything else is blocked. I would like to run something that listens on port 80/443 of the WLAN NIC, and, for non VPN'ed connections, given any HTTP/HTTPS request it will return a single webpage saying "Unauthenticated" and explain how to sign into the VPN. A transparent proxy seems to be what I need, but my searches all seem to direct me to Squid, which is already running on my server and seems overkill for this simple task. Is there a simpler, lightweight program out there that does just this or should I just suck it up and run two instances of Squid (or figure out how to configure it)? Or, is this entire VPN thing I'm doing complete nonsense and I should just enable encryption on the wireless router?

  Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >