Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 388/609 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

  • nat with iptables, re-connecting fail within about 3 minutes

    - by xpu
    i constructed a nat with iptables, as following: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -I PREROUTING -p tcp --dport 9000 -j DNAT --to xx.xx.xx.xx iptables -t nat -I POSTROUTING -p tcp --dport 9000 -j MASQUERADE service iptables save service iptables restart the configuration worked fine, but there was a problem when i disconnected and tried to reconnect again, connection will be refused within about 2~3 minutes, after that, things go fine again. what was the problem? how do i make it to accept new connection after the old one break?

    Read the article

  • Dell Inspiron7520 and ubntu 12.04 issues

    - by user91358
    I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

    Read the article

  • x.265 in ffmpeg

    - by Levan
    Today I found out that x265 is already present in ffmpeg so I compiled ffmpeg with this guide Sadly libx265 did not work on ubuntu, however on windows I tried the same thing with zeranoe ffmpeg build and it worked without a problem. So do you think i did something wrong or it is not yet implemented in linux build (using that guide)? The results of the command ffmpeg -codecs | grep -i hevc show: ffmpeg version 2.1.git Copyright (c) 2000-2014 the FFmpeg developers built on Feb 19 2014 19:00:17 with gcc 4.8 (Ubuntu/Linaro 4.8.1-10ubuntu9) configuration: --prefix=/home/levan/ffmpeg_build --extra-cflags=-I/home/levan/ffmpeg_build/include --extra-ldflags=-L/home/levan/ffmpeg_build/lib --bindir=/home/levan/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab libavutil 52. 64.100 / 52. 64.100 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 33.100 / 55. 33.100 libavdevice 55. 10.100 / 55. 10.100 libavfilter 4. 1.102 / 4. 1.102 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 D.V.L. hevc H.265 / HEVC (High Efficiency Video Coding) Thank you for your time

    Read the article

  • Multiple iSCSI Targets or 1 that's shared?

    - by Joost Verdaasdonk
    On my network I have several types of files I want to save on a SAN like: SQL db's and logs Exchange data Random files Now I'm wondering if I should create one iSCSI Target with a large volume and initiate that from one of the servers. (and share it so other servers can use it too) Or I should create separate Targets to have each server use its own storage. For the record the storage could be separated because the servers aren't using the shared data. For one reason I was thinking of one storage is ease of backup. (but perhaps performance could be a problem?) What would be an advisable configuration for these type of data?

    Read the article

  • SQL Server 2012 LocalDB

    - by user3061846
    I´m a noobie so please be patient ! I developed an app using C# and SQL Server Express 2012 with a local database, my connection string is"Data Source=localhost ; Initial Catalog = scalnet ; Integrated Security=SSPI; Trusted_Connection=Yes"; Everything worked ok till the time I made a setup and tried to install my app in another computer. My first question is: - What version of SQL should I install is this machine? it should be as ligth as possible. - I tried to install SQL exprees 2012 but it gives me an error when I execute my app "A network related or instance specific error occurred while establishing a ..... (provider:Named Pipes Provider, error:40 - Could not open a connection to SQL server." This probably should be a problem with the server configuration but I have no ideia how to solve this... Can anyone point me to the rigth direction ? ? Thanks

    Read the article

  • Distribution upgrade freezes

    - by lugte098
    When upgrading from Ubuntu 10.04 to 10.10 the distribution upgrade program freezes after it notifies me of a change in /etc/apparmor.d/usr.bin.mysqld and asks me to keep the old file or accept the new changes (I accepted them). The terminal says: Configuration file `/etc/apparmor.d/usr.sbin.mysqld' ==> Modified (by you or by a script) since installation. ==> Package distributor has shipped an updated version. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** usr.sbin.mysqld (Y/I/N/O/D/Z) [default=N] ? y Installing new version of config file /etc/apparmor.d/usr.sbin.mysqld ... The program hasn't done anything after this for about 2 hours now and I have no idea what I should do at this point. Can I quit the program and restart it? Or is there another action I should take? It did however change the '/etc/apparmor.d/usr.sbin.mysqld' to the new version, but is still frozen...

    Read the article

  • I know this is a stupid question but... How many websites can my server potentially hold?

    - by Daniel Kindler
    Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

    Read the article

  • Slow Gmail attachment download over HTTPS

    - by Todd
    It only affects Gmail. I have tested other HTTP, FTP and HTTPS websites and downloading is fine, at the exact same time the problem is affecting a Gmail attachment download. The symptoms include both: High waiting time, before the download starts (on the order of 30 seconds); AND Very slow download transfer speeds (on the order of 1kbps) It's a very strange problem, and I didn't find any recent issues relating to Google Australia. The account works fine at another site with a different ISP, so it's either a computer configuration or ISP - I lean to the latter.

    Read the article

  • Can't access to a iSCSI volume

    - by jmiguel.rodriguez
    I have a iSCSI target on a customer place I'm using from an old Fedora (Core6) server. I configured it and formatted as ext3 (mistake, now I know) and I've been working with it for some time. Now I need to access this volume from other machine. As far as I've read, I can't do it safely from two machines at the same time (yep, that's the first thing I tried). So I've umount it from original server and tried to mount it on the new server (I did it at first with Ubuntu 10 LTS but when I was unable to do it I installed another Fedora with the same configuration) with no success. The problem: I can see all target on NAS but when I do a "fdisk -l" to see all devices and know which mount I see all targets as SFS filesystem. From the original server I see all SFS (after all, they belong to my customer and don't know what he have in) except the one I manage which I see as 'Linux'. What can I do? Thank you in advanced, regards, jmiguel

    Read the article

  • Ubuntu Dependency Problem in Activity log Manager

    - by Incredible
    incredible@incredible-Inspiron-N5010:~$ sudo apt-get -f install [sudo] password for incredible: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: activity-log-manager The following packages will be upgraded: activity-log-manager 1 upgraded, 0 newly installed, 0 to remove and 287 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.3 kB of archives. After this operation, 29.7 kB disk space will be freed. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of activity-log-manager: activity-log-manager depends on activity-log-manager-common (= 0.9.4-0ubuntu3); however: Version of activity-log-manager-common on system is 0.9.4-0ubuntu3.1. activity-log-manager-control-center (0.9.4-0ubuntu3.1) breaks activity-log-manager (<< 0.9.4-0ubuntu3.1) and is installed. Version of activity-log-manager to be configured is 0.9.4-0ubuntu3. dpkg: error processing activity-log-manager (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: activity-log-manager E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • VMWare hypervisor with only 1 network card?

    - by Rafiq Maniar
    VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

    Read the article

  • Remap Copy and Paste shortcuts on a Mac

    - by Linzdp
    I use Windows at work and a Mac at home. One of the biggest issues is the difference between the copy paste shortcuts on Windows vs the Mac i.e. Ctrl + C & Ctrl + V on Windows and on the Mac its Command + C and Command + V. Invariably its hard because of learnt motor skills where my hand always shapes itself to the Windows Ctrl + C configuration(I have been using Windows longer) I would like to remap the Copy and Paste to the Fn + C and Fn + V on the Mac. Why? Because the Fn key is actually the key that corresponds to where the Ctrl key is on Windows keyboards and since its the last edge key its easy to find. I have tried Double Command but it doesn't seem to have an option of turning Fn to the Command key.

    Read the article

  • Postfix cleanup daemon access control

    - by Flimzy
    Is there any way to control which hosts are permitted to connect to the cleanup daemon over TCP? Our 'master.cf' contains: 2526 inet n - - - 0 cleanup This is necessary because we have a cluster of SMTP servers running custom code, and they can all inject mail to the centralized postfix server via the cleanup daemon. However, we want to allow only our authorized servers to connect to the cleanup daemon. The current configuration allows any host to connect to port 2526. Clearly we can use iptables to restrict access, but is there a way to do this within postfix itself?

    Read the article

  • VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

    - by user1257262
    So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

    Read the article

  • Tool to allow Kerberos Authenticated users to modify Firewall settings

    - by Lars Hanke
    I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

    Read the article

  • Unable to open websites that use HTTPS on linux

    - by negai
    I have the following network configuration: My PC 192.168.1.20/24 uses 192.168.1.1/24 as a gateway. Dlink-2760U router with Local address 192.168.1.1/24 has a VPN connection open with the provider using PPTP. Whenever I'm trying to open some web-sites that has some authorization (e.g. gmail.com, coursera.org), I'm getting a request timeout. This problem is observed mostly on linux (Ubuntu 12.04 and Debian 6.0), while most of such websites work correctly on windows XP. Could you please help me diagnose the problem? Could it be related to NAT + HTTPS? Thanks

    Read the article

  • Problem starting X in unbuntu 10.10

    - by xain
    Hi, I recently installed ubuntu 10.10 on my old toshiba a100 (where I've been running XP with no problems for ages). The installation went fine, I can log in with my user account, but after that the screen has only the wallpaper (and the mouse is enabled). Any hints on how to troubleshoot it ? These are the Xorg and the messages log files. Thanks When booted in safe graphics mode it worked just fine. Is there a way to set that configuration as the default so I don't have to go through those menus every time I boot ?

    Read the article

  • Page loading hangs and never times out (Apache)

    - by Lucas -luky- N.
    I have set up Apache2 on a guest Ubuntu 10.04 OS (virtualbox). I have created a "big" HTML file (4MB) with only plain text and when I access a page through my local IP address such as http://192.168.0.100 it successfully loads the entire page. However, when I try to access it through my public IP address the browser loads part of the page and then hangs forever on "loading". I can load a simple webpage though. I'm not sure whether it's an issue with my Apache configuration, Virtualbox, Router or Modem. Any clues? Tried enabling Debug and mod_status but didn't find any useful information.

    Read the article

  • Problems with the backup

    - by marcodv
    I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

    Read the article

  • Best way to setup hosts, subdomains, and IPs [closed]

    - by LynnOwens
    I own a domain, let's call it mydomain.com. I need to host the following off it: forums.mydomain.com www.mydomain.com blog.mydomain.com objects.mydomain.com I believe I can get 5 static IPs. I plan on assigning one each to those four hosts. Then I need to adhoc create names, all below objects.mydomain.com. For instance: one.objects.mydomain.com two.objects.mydomain.com three.objects.mydomain.com I need to create these names programatically, and without human intervention. Preferably, they would not get their own IPs. They would use the IP of objects.mydomain.com. First question: Does this mean that I need to host my own DNS? Second question: I'm using Apache as a web server. What does the virtual host configuration look like? I was experimenting with the following to understand how routing on domain names works and I always ended up at www. <VirtualHost *:80> ServerAdmin [email protected] ServerName www.mydomain.com ServerAlias www.mydomain.com DocumentRoot "E:/Static/www" RewriteEngine On RewriteRule ^(/www/.*) /www$1 </Virtualhost> <VirtualHost *:80> ServerAdmin [email protected] ServerName forums.mydomain.com ServerAlias forums.mydomain.com DocumentRoot "E:/Static/forums" RewriteEngine On RewriteRule ^(/forums/.*) /forums$1 </Virtualhost>

    Read the article

  • vsftpd allow anonymous log-in

    - by user1817081
    I'm setting up a ftp server, that will allow anonymous to READ/WRITE to the server. Here is my configuration. anonymous_enable=YES local_enable=YES write_enable=YES anon_upload_enable=YES anon_mkdir_write_enable=YES xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/xferlog xferlog_std_format=YES ftpd_banner=Welcome to blah FTP service. listen=YES pam_service_name=vsftpd userlist_enable=NO tcp_wrappers=YES no_anon_password=YES In my /var/ftp/ i set the permission to 755. When I tried to set it to 777 i got the following error, when i tried to log in. 500 OOPS: vsftpd: refusing to run with writeable anonymous root login failed. Do i need to set up anything else to allow READ/WRITE for anonymous?

    Read the article

  • Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

    - by strangeman
    I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

    Read the article

  • Good reference for Cisco Resilient Ethernet Protocol

    - by Karthik
    I have been trying to understand Cisco's Resilient Ethernet Protocol, but am unable to find a proper source to read from. I checked the Cisco site and also their White Paper on REP. But none of them helped to understand REP clearly. Googling was also of not much help, as all I got was explanation about configuration instructions and not on the protocol itself. Can you guys point me to a good book or site, which explains Resilient Ethernet Protocol in detail? Thanks in advance.

    Read the article

  • Unreal Torunament (UT99) no sound in 12.04?

    - by Talas
    I've been trying to get sound working in Unreal Torunament for a couple of days now. I'm using the native Unreal Tournament version, not wine or something like that. I have sound in all other games and media applications that I have tried. In older ubuntu versions it worked fine. I'm now using kubuntu 12.04, I have all the alsa-oss and oss-compat packages installed. I have followed most of the advice out there, and it all seems to fall on padsp and aoss. My problem, however, is that even when trying to use padsp or aoss, I can't get any sound at all. (Note UT has two output modes: ALAudio and Generic(OSS), I have tried both). Is there some configuration required to use padsp or aoss correctly? I have ran it like padsp ./ut and aoss ./ut If using the AL backend in UT I get (both aoss and padsp give this): Bound to ALAudio.so open /dev/dsp: Invalid argument Audio initialization failed. If using the OSS backend in UT I get (both aoss and padsp give this): Bound to Audio.so Failed to open audio device. Audio initialization failed. Note that so far, I have gotten absolutely no sound. Thanks for any help!

    Read the article

  • RDC not working from outside

    - by Cotten
    I've set up Remote Connection according to : http://windows.microsoft.com/is-IS/windows7/allow-remote-desktop-connections-from-outside-your-home-network That is, Allow remote connections to the computer you want to access. Make sure Remote Desktop is able to communicate through your firewall. Find the IP address of the computer on your home network that you want to connect to. Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address. Find your router's public IP address so that Remote Desktop can find it on the Internet. When I'm inside the LAN, RDC works flawlessly. When I try to connect to the ip given by my ISP it cannot connect. I've setup port forwarding for 3389 on my netgear router. Thanks!

    Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >